diff options
Diffstat (limited to 'arch/arm/mach-mx3/armadillo5x0.c')
| -rw-r--r-- | arch/arm/mach-mx3/armadillo5x0.c | 60 |
1 files changed, 59 insertions, 1 deletions
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c index 776c0ee1b3cd..54aab401dbdf 100644 --- a/arch/arm/mach-mx3/armadillo5x0.c +++ b/arch/arm/mach-mx3/armadillo5x0.c @@ -33,6 +33,9 @@ #include <linux/irq.h> #include <linux/mtd/physmap.h> #include <linux/io.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> +#include <linux/i2c.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -97,6 +100,47 @@ static int armadillo5x0_pins[] = { MX31_PIN_FPSHIFT__FPSHIFT, MX31_PIN_DRDY0__DRDY0, IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/ + /* I2C2 */ + MX31_PIN_CSPI2_MOSI__SCL, + MX31_PIN_CSPI2_MISO__SDA, +}; + +/* RTC over I2C*/ +#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4) + +static struct i2c_board_info armadillo5x0_i2c_rtc = { + I2C_BOARD_INFO("s35390a", 0x30), +}; + +/* GPIO BUTTONS */ +static struct gpio_keys_button armadillo5x0_buttons[] = { + { + .code = KEY_ENTER, /*28*/ + .gpio = IOMUX_TO_GPIO(MX31_PIN_SCLK0), + .active_low = 1, + .desc = "menu", + .wakeup = 1, + }, { + .code = KEY_BACK, /*158*/ + .gpio = IOMUX_TO_GPIO(MX31_PIN_SRST0), + .active_low = 1, + .desc = "back", + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data armadillo5x0_button_data = { + .buttons = armadillo5x0_buttons, + .nbuttons = ARRAY_SIZE(armadillo5x0_buttons), +}; + +static struct platform_device armadillo5x0_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &armadillo5x0_button_data, + } }; /* @@ -278,7 +322,7 @@ static struct resource armadillo5x0_smc911x_resources[] = { }; static struct smsc911x_platform_config smsc911x_info = { - .flags = SMSC911X_USE_32BIT, + .flags = SMSC911X_USE_16BIT, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, }; @@ -300,6 +344,8 @@ static struct imxuart_platform_data uart_pdata = { static struct platform_device *devices[] __initdata = { &armadillo5x0_smc911x_device, + &mxc_i2c_device1, + &armadillo5x0_button_device, }; /* @@ -335,6 +381,18 @@ static void __init armadillo5x0_init(void) /* set NAND page size to 2k if not configured via boot mode pins */ __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); + + /* RTC */ + /* Get RTC IRQ and register the chip */ + if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) { + if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0) + armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO); + else + gpio_free(ARMADILLO5X0_RTC_GPIO); + } + if (armadillo5x0_i2c_rtc.irq == 0) + pr_warning("armadillo5x0_init: failed to get RTC IRQ\n"); + i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1); } static void __init armadillo5x0_timer_init(void) |