summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mx3/mach-mx31lite.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-mx3/mach-mx31lite.c')
-rw-r--r--arch/arm/mach-mx3/mach-mx31lite.c37
1 files changed, 18 insertions, 19 deletions
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index 9e64c66396e0..24a21a384bf1 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -27,6 +27,7 @@
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -111,9 +112,9 @@ static const struct spi_imx_master spi1_pdata __initconst = {
.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
};
-static struct mc13783_platform_data mc13783_pdata __initdata = {
- .flags = MC13783_USE_RTC |
- MC13783_USE_REGULATOR,
+static struct mc13xxx_platform_data mc13783_pdata __initdata = {
+ .flags = MC13XXX_USE_RTC |
+ MC13XXX_USE_REGULATOR,
};
static struct spi_board_info mc13783_spi_dev __initdata = {
@@ -129,7 +130,6 @@ static struct spi_board_info mc13783_spi_dev __initdata = {
* USB
*/
-#if defined(CONFIG_USB_ULPI)
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
@@ -167,15 +167,15 @@ static int usbh2_init(struct platform_device *pdev)
gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
- return 0;
+ mdelay(10);
+
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
- .flags = MXC_EHCI_POWER_PINS_ENABLED,
};
-#endif
/*
* NOR flash
@@ -227,7 +227,7 @@ void __init mx31lite_map_io(void)
static int mx31lite_baseboard;
core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
-static void __init mxc_board_init(void)
+static void __init mx31lite_init(void)
{
int ret;
@@ -252,13 +252,11 @@ static void __init mxc_board_init(void)
imx31_add_spi_imx1(&spi1_pdata);
spi_register_board_info(&mc13783_spi_dev, 1);
-#if defined(CONFIG_USB_ULPI)
/* USB */
- usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
- imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
+ usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
+ if (usbh2_pdata.otg)
+ imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
/* SMSC9117 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
@@ -281,9 +279,10 @@ struct sys_timer mx31lite_timer = {
MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
- .map_io = mx31lite_map_io,
- .init_irq = mx31_init_irq,
- .init_machine = mxc_board_init,
- .timer = &mx31lite_timer,
+ .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .map_io = mx31lite_map_io,
+ .init_early = imx31_init_early,
+ .init_irq = mx31_init_irq,
+ .timer = &mx31lite_timer,
+ .init_machine = mx31lite_init,
MACHINE_END