diff options
Diffstat (limited to 'arch/arm/mach-mx35/serial.c')
-rw-r--r-- | arch/arm/mach-mx35/serial.c | 179 |
1 files changed, 179 insertions, 0 deletions
diff --git a/arch/arm/mach-mx35/serial.c b/arch/arm/mach-mx35/serial.c new file mode 100644 index 000000000000..74068f1c39dd --- /dev/null +++ b/arch/arm/mach-mx35/serial.c @@ -0,0 +1,179 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +/*! + * @file mach-mx35/serial.c + * + * @brief This file contains the UART initiliazation. + * + * @ingroup MSL_MX35 + */ +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/serial.h> +#include <mach/hardware.h> +#include <mach/mxc_uart.h> +#include <mach/spba.h> +#include "serial.h" +#include "board-mx35_3stack.h" + +#if defined(CONFIG_SERIAL_MXC) || defined(CONFIG_SERIAL_MXC_MODULE) + +/*! + * This is an array where each element holds information about a UART port, + * like base address of the UART, interrupt numbers etc. This structure is + * passed to the serial_core.c file. Based on which UART is used, the core file + * passes back the appropriate port structure as an argument to the control + * functions. + */ +static uart_mxc_port mxc_ports[] = { + [0] = { + .port = { + .membase = (void *)IO_ADDRESS(UART1_BASE_ADDR), + .mapbase = UART1_BASE_ADDR, + .iotype = SERIAL_IO_MEM, + .irq = UART1_INT1, + .fifosize = 32, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + .ints_muxed = UART1_MUX_INTS, + .irqs = {UART1_INT2, UART1_INT3}, + .mode = UART1_MODE, + .ir_mode = UART1_IR, + .enabled = UART1_ENABLED, + .hardware_flow = UART1_HW_FLOW, + .cts_threshold = UART1_UCR4_CTSTL, + .dma_enabled = UART1_DMA_ENABLE, + .dma_rxbuf_size = UART1_DMA_RXBUFSIZE, + .rx_threshold = UART1_UFCR_RXTL, + .tx_threshold = UART1_UFCR_TXTL, + .shared = UART1_SHARED_PERI, + .dma_tx_id = MXC_DMA_UART1_TX, + .dma_rx_id = MXC_DMA_UART1_RX, + .rxd_mux = MXC_UART_RXDMUX, + .ir_tx_inv = MXC_IRDA_TX_INV, + .ir_rx_inv = MXC_IRDA_RX_INV, + }, + [1] = { + .port = { + .membase = (void *)IO_ADDRESS(UART2_BASE_ADDR), + .mapbase = UART2_BASE_ADDR, + .iotype = SERIAL_IO_MEM, + .irq = UART2_INT1, + .fifosize = 32, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 1, + }, + .ints_muxed = UART2_MUX_INTS, + .irqs = {UART2_INT2, UART2_INT3}, + .mode = UART2_MODE, + .ir_mode = UART2_IR, + .enabled = UART2_ENABLED, + .hardware_flow = UART2_HW_FLOW, + .cts_threshold = UART2_UCR4_CTSTL, + .dma_enabled = UART2_DMA_ENABLE, + .dma_rxbuf_size = UART2_DMA_RXBUFSIZE, + .rx_threshold = UART2_UFCR_RXTL, + .tx_threshold = UART2_UFCR_TXTL, + .shared = UART2_SHARED_PERI, + .dma_tx_id = MXC_DMA_UART2_TX, + .dma_rx_id = MXC_DMA_UART2_RX, + .rxd_mux = MXC_UART_IR_RXDMUX, + .ir_tx_inv = MXC_IRDA_TX_INV, + .ir_rx_inv = MXC_IRDA_RX_INV, + }, +#if UART3_ENABLED == 1 + [2] = { + .port = { + .membase = (void *)IO_ADDRESS(UART3_BASE_ADDR), + .mapbase = UART3_BASE_ADDR, + .iotype = SERIAL_IO_MEM, + .irq = UART3_INT1, + .fifosize = 32, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 2, + }, + .ints_muxed = UART3_MUX_INTS, + .irqs = {UART3_INT2, UART3_INT3}, + .mode = UART3_MODE, + .ir_mode = UART3_IR, + .enabled = UART3_ENABLED, + .hardware_flow = UART3_HW_FLOW, + .cts_threshold = UART3_UCR4_CTSTL, + .dma_enabled = UART3_DMA_ENABLE, + .dma_rxbuf_size = UART3_DMA_RXBUFSIZE, + .rx_threshold = UART3_UFCR_RXTL, + .tx_threshold = UART3_UFCR_TXTL, + .shared = UART3_SHARED_PERI, + .dma_tx_id = MXC_DMA_UART3_TX, + .dma_rx_id = MXC_DMA_UART3_RX, + .rxd_mux = MXC_UART_RXDMUX, + .ir_tx_inv = MXC_IRDA_TX_INV, + .ir_rx_inv = MXC_IRDA_RX_INV, + }, +#endif +}; + +static struct platform_device mxc_uart_device1 = { + .name = "mxcintuart", + .id = 0, + .dev = { + .platform_data = &mxc_ports[0], + }, +}; + +static struct platform_device mxc_uart_device2 = { + .name = "mxcintuart", + .id = 1, + .dev = { + .platform_data = &mxc_ports[1], + }, +}; + +#if UART3_ENABLED == 1 +static struct platform_device mxc_uart_device3 = { + .name = "mxcintuart", + .id = 2, + .dev = { + .platform_data = &mxc_ports[2], + }, +}; +#endif + +static int __init mxc_init_uart(void) +{ + /* Register all the MXC UART platform device structures */ + platform_device_register(&mxc_uart_device1); + platform_device_register(&mxc_uart_device2); + + /* Grab ownership of shared UARTs 3 and 4, only when enabled */ +#if UART3_ENABLED == 1 +#if UART3_DMA_ENABLE == 1 + spba_take_ownership(UART3_SHARED_PERI, (SPBA_MASTER_A | SPBA_MASTER_C)); +#else + spba_take_ownership(UART3_SHARED_PERI, SPBA_MASTER_A); +#endif /* UART3_DMA_ENABLE */ + platform_device_register(&mxc_uart_device3); +#endif /* UART3_ENABLED */ + + return 0; +} + +#else +static int __init mxc_init_uart(void) +{ + return 0; +} +#endif + +arch_initcall(mxc_init_uart); |