diff options
Diffstat (limited to 'arch/arm/mach-mx5/Kconfig')
| -rw-r--r-- | arch/arm/mach-mx5/Kconfig | 257 |
1 files changed, 247 insertions, 10 deletions
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 5dd3e0fa0b99..c45880ff8521 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -6,6 +6,9 @@ config ARCH_MX51 config ARCH_MX53 bool "MX53" +config ARCH_MX50 + bool + config FORCE_MAX_ZONEORDER int "MAX_ORDER" default "13" @@ -21,7 +24,8 @@ config MX5_MULTI_ARCH bool default y select RUNTIME_PHYS_OFFSET - depends on ARCH_MX51 && ARCH_MX53 + depends on ARCH_MX51 + depends on ARCH_MX50 || ARCH_MX53 config MACH_MX51_3DS bool "Support MX51 3-Stack platform" @@ -44,12 +48,23 @@ config MACH_MX53_EVK Include support for MX53 EVK platform. This includes specific configurations for the board and its peripherals. +config MACH_MX50_ARM2 + bool "Support MX50 Armadillo2 platform" + select ARCH_MX50 + help + Include support for MX50 EVK platform. This includes specific + configurations for the board and its peripherals. + + config MODULE_CCXMX51 bool +config LATE_CPU_CLK_ENABLE + bool config MACH_CCWMX51JS bool "Support for the ConnectCore Wi-i.MX51 module, on the JSK base board" select MODULE_CCXMX51 + select LATE_CPU_CLK_ENABLE help Include support for the Digi ConnectCore Wi-i.MX51 Embedded Module, on the JumpStart Kit base board. This includes specific configurations for the @@ -58,11 +73,64 @@ config MACH_CCWMX51JS config MACH_CCWMX51 bool "Support for the ConnectCore Wi-i.MX51 module" select MODULE_CCXMX51 + select LATE_CPU_CLK_ENABLE help Include support for the Digi ConnectCore Wi-i.MX51 Embedded Module, on a custom board. The machine file should be modified to include support for the interfaces available in that board. +config MACH_CCMX51JS + bool "Support for the ConnectCore i.MX51 module, on the JSK base board" + select MODULE_CCXMX51 + select LATE_CPU_CLK_ENABLE + help + Include support for the Digi ConnectCore i.MX51 Embedded Module, on the + JumpStart Kit base board. This includes specific configurations for the + peripherals on that base board. + +config MACH_CCMX51 + bool "Support for the ConnectCore i.MX51 module" + select MODULE_CCXMX51 + select LATE_CPU_CLK_ENABLE + help + Include support for the Digi ConnectCore i.MX51 Embedded Module, on a + custom board. The machine file should be modified to include support for + the interfaces available in that board. + +choice + prompt "Select development board variant:" + default JSCCWMX51_V2 + +config JSCCWMX51_V1 + bool "ConnectCore for i.MX51 Early Availability Development Board" + depends on MODULE_CCXMX51 + select CCWMX51_DISP0_RGB888 if CCWMX51_DISP0 + help + Select this option if you are using the development board included in + the Early Availability (EA) kit. The Digi part number for this board + revision is 30011032-01. It is printed on the top side of the + development board, close to the connectors of Signal Rail 1. + +config JSCCWMX51_V2 + bool "ConnectCore for i.MX51 JumpStart Kit Development Board" + depends on MODULE_CCXMX51 + select CCWMX51_DISP0_RGB666 if CCWMX51_DISP0 + help + Select this option if you are using the development board included in + Digi JumpStart Kit. The Digi part number for this board revision is + 30011032-03. It is printed on the top side of the development board, + close to the connectors of Signal Rail 1. + +config JSCCWMX51_CUSTOM + bool "Custom ConnectCore for i.MX51 Carrier Board" + depends on MODULE_CCXMX51 + help + Select this option if you are using your own custom-designed carrier + board. + +endchoice + + comment "MX5x Options:" config MXC_SDMA_API @@ -72,6 +140,9 @@ config MXC_SDMA_API This selects the Freescale MXC SDMA API. If unsure, say N. +config MXC_NAND_SWAP_BI + bool + config ARCH_MXC_HAS_NFC_V3 bool "MXC NFC Hardware Version 3" depends on ARCH_MX5 @@ -83,9 +154,10 @@ config ARCH_MXC_HAS_NFC_V3 config ARCH_MXC_HAS_NFC_V3_2 bool "MXC NFC Hardware Version 3.2" depends on ARCH_MXC_HAS_NFC_V3 + select MXC_NAND_SWAP_BI if MODULE_CCXMX51 default y help - This selects the Freescale MXC Nand Flash Controller Hardware Version 3.1 + This selects the Freescale MXC Nand Flash Controller Hardware Version 3.2 If unsure, say N. config SDMA_IRAM @@ -100,50 +172,112 @@ menu "Serial Port Options" config UART1_ENABLED bool "Enable UART1" default y - depends on SERIAL_MXC && MACH_CCWMX51JS + depends on SERIAL_MXC && MODULE_CCXMX51 help Enable the MX51 UART1 interface +choice + prompt "Select the configuration for the UART lines:" + default UART1_2WIRE_ENABLED + depends on UART1_ENABLED + +config UART1_2WIRE_ENABLED + bool "Configure UART1 as 2 wire UART (RX/TX)" + +config UART1_CTS_RTS_ENABLED + bool "Configure UART1 as 4 wire UART (RX/TX/RTS/CTS)" + +config UART1_FULL_UART_ENABLED + bool "Configure UART1 as full UART (RX/TX/RTS/CTS/DCD/DTR/DSR/RI)" +endchoice + +config UART1_IRDA_ENABLED + bool "Enable IRDA mode" + default n + depends on UART1_ENABLED + help + Enable IRDA mode + config UART2_ENABLED bool "Enable UART2" default y - depends on SERIAL_MXC && MACH_CCWMX51JS + depends on SERIAL_MXC && MODULE_CCXMX51 help Enable the MX51 UART2 interface +config UART2_CTS_RTS_ENABLED + bool "Configure RTS/CTS lines for UART2 hardware flow control" + default n + depends on UART2_ENABLED + depends on !USB_EHCI_ARC_H1 + help + Configure the UART2 RTS/CTS lines for hardware flow control operation + +comment "UART2 CTS/RTS is not available on the ConnectCore Wi-i.MX51 JumpStart board if" + depends on USB_EHCI_ARC_H1 +comment "the support for Host1 of the Freescale USB controller is enabled." + depends on USB_EHCI_ARC_H1 + +config UART2_IRDA_ENABLED + bool "Enable IRDA mode" + default n + depends on UART2_ENABLED + help + Enable IRDA mode + +comment "UART3 is not available on the ConnectCore Wi-i.MX51 JumpStart board if UART1" + depends on UART1_FULL_UART_ENABLED +comment "is configured as full UART. This may not be the case in a custom base board." + depends on UART1_FULL_UART_ENABLED + config UART3_ENABLED bool "Enable UART3" default y - depends on SERIAL_MXC && MACH_CCWMX51JS + depends on SERIAL_MXC && MODULE_CCXMX51 && !UART1_FULL_UART_ENABLED help Enable the MX51 UART3 interface + +config UART3_CTS_RTS_ENABLED + bool "Configure RTS/CTS lines for UART3 hardware flow control" + default n + depends on UART3_ENABLED + help + Configure the UART3 RTS/CTS lines for hardware flow control operation + +config UART3_IRDA_ENABLED + bool "Enable IRDA mode" + default n + depends on UART3_ENABLED + help + Enable IRDA mode + endmenu menu "SPI Interface Options" config SPI_MXC_SELECT1 bool "Enable CSPI1" - depends on SPI_MXC && MACH_CCWMX51JS + depends on SPI_MXC && MODULE_CCXMX51 default y help Enable the CSPI1 interface config SPI_MXC_SELECT1_SS1 bool "Enable SS1 line for CSPI1" - depends on SPI_MXC_SELECT1 && MACH_CCWMX51JS + depends on SPI_MXC_SELECT1 && MODULE_CCXMX51 default y help Enable SS1 (slave select 1) line, used on ConnectCore Wi-i.MX51 base board SPI connector config SPI_MXC_SELECT2 bool "Enable CSPI2" - depends on SPI_MXC && MACH_CCWMX51JS + depends on SPI_MXC && MODULE_CCXMX51 default n help Enable the CSPI2 interface config SPI_MXC_SELECT3 bool "Enable CSPI3" - depends on SPI_MXC && MACH_CCWMX51JS + depends on SPI_MXC && MODULE_CCXMX51 default n help Enable the CSPI3 interface @@ -155,6 +289,7 @@ config I2C_MXC_SELECT1 bool "Enable I2C1 module" default y depends on I2C_MXC + depends on !MACH_CCWMX51JS help Enable MX51 I2C1 module. @@ -174,4 +309,106 @@ config I2C_MXC_SELECT3 endmenu -source "arch/arm/mach-mx5/displays/Kconfig"
\ No newline at end of file +menu "SD/MMC Interface options" + +config ESDHCI_MXC_SELECT1 + bool "Enable SDHC 1" + default y + depends on MMC_IMX_ESDHCI + help + Enable the SD Host Controller 1. + +config ESDHCI_MXC_SELECT3 + bool "Enable SDHC 3" + default y + depends on MMC_IMX_ESDHCI + help + Enable the SD Host Controller 3. + +endmenu + +if !FB_MXC_SYNC_PANEL +comment "---Video interface disabled" +endif + +if FB_MXC_SYNC_PANEL +menu "Video Interface(s)" + +choice + prompt "Video color depth" + default CCWMX51_DEFAULT_VIDEO_32BPP + depends on MODULE_CCXMX51 + +config CCWMX51_DEFAULT_VIDEO_32BPP + bool "32 bits per pixel" + +config CCWMX51_DEFAULT_VIDEO_16BPP + bool "16 bits per pixel" +endchoice + +config CCWMX51_DEFAULT_VIDEO_BPP + int + depends on MODULE_CCXMX51 + default 32 if CCWMX51_DEFAULT_VIDEO_32BPP + default 16 if CCWMX51_DEFAULT_VIDEO_16BPP + +config CCWMX51_DISP0 + bool "Enable Display Interface 1 (primary)" + help + This enables the i.MX51 Display Interface 1. + +if CCWMX51_DISP0 +choice + prompt "Display 1 color mode" + +config CCWMX51_DISP0_RGB888 + bool "24bit color mode" + depends on JSCCWMX51_V1 + help + Configure Display 1 in 24bit color mode. + + WARNING: The JumpStart Kit Development Board (30011032-02) is designed + to work in 18bit mode. To work in 24bit mode you need an Early Availability + Kit Development Board (30011032-01) or a custom designed board that + populates all 24 data lines of the video interface. + + IMPORTANT: If Display 1 is configured for 24bit color depth, Display 2 + will not be available. + +config CCWMX51_DISP0_RGB666 + bool "18bit color mode" + depends on JSCCWMX51_V2 + help + Configure Display 1 in 18bit color mode. Use this mode if working + on a JumpStart Kit Development Board. + + WARNING: The Early Availability Development Board (30011032-01) is + designed to work in 24bit mode. To work in 18bit mode you need a + JumpStart Kit Development Board (30011032-02) or a custom designed + board that only populates 18 data lines of the video interface. + +endchoice +endif + +comment "To enable the Display 2 Video interface, disable the FEC (under network drivers)" + depends on FEC || CCWMX51_DISP0_RGB888 +comment "and set 18bit color mode for the Display 1" + depends on FEC || CCWMX51_DISP0_RGB888 + +config CCWMX51_DISP1 + bool "Enable Display Interface 2 (secondary)" + depends on !FEC && !CCWMX51_DISP0_RGB888 + help + This enables the i.MX51 Display Interface 2 (18bit color mode only). + +config CCWMX51_SECOND_TOUCH + bool "Enable support for external touch controller (ADS7843)" + depends on SPI_MXC_SELECT1 + select TOUCHSCREEN_ADS7846 + help + This enables the support for the external touch interface (ADS7843) available on the + High Resolution Display board, connected to the processor through SPI and that can be + used with the secondary display (but also with the primary) + +endmenu +endif |