diff options
Diffstat (limited to 'arch/arm/mach-mx51/mx51_3stack.c')
-rw-r--r-- | arch/arm/mach-mx51/mx51_3stack.c | 1300 |
1 files changed, 1300 insertions, 0 deletions
diff --git a/arch/arm/mach-mx51/mx51_3stack.c b/arch/arm/mach-mx51/mx51_3stack.c new file mode 100644 index 000000000000..a2fdabc7965a --- /dev/null +++ b/arch/arm/mach-mx51/mx51_3stack.c @@ -0,0 +1,1300 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <asm/mach/keypad.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/nodemask.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/fsl_devices.h> +#include <linux/spi/spi.h> +#include <linux/i2c.h> +#include <linux/ata.h> +#include <linux/pmic_external.h> +#include <linux/ipu.h> +#if defined(CONFIG_MTD) || defined(CONFIG_MTD_MODULE) +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> + +#include <asm/mach/flash.h> +#endif + +#include <linux/regulator/consumer.h> +#include <mach/hardware.h> +#include <mach/spba.h> +#include <asm/irq.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/common.h> +#include <mach/memory.h> +#include <mach/gpio.h> +#include <mach/mmc.h> + +#include "board-mx51_3stack.h" +#include "iomux.h" +#include "crm_regs.h" + +/*! + * @file mach-mx51/mx51_3stack.c + * + * @brief This file contains the board specific initialization routines. + * + * @ingroup MSL_MX51 + */ +extern void __init mx51_3stack_io_init(void); +extern struct cpu_wp *(*get_cpu_wp)(int *wp); +extern void (*set_num_cpu_wp)(int num); +static int num_cpu_wp = 3; + +/* working point(wp): 0 - 800MHz; 1 - 166.25MHz; */ +static struct cpu_wp cpu_wp_auto[] = { + { + .pll_rate = 1000000000, + .cpu_rate = 1000000000, + .pdf = 0, + .mfi = 10, + .mfd = 11, + .mfn = 5, + .cpu_podf = 0, + .cpu_voltage = 1175000,}, + { + .pll_rate = 800000000, + .cpu_rate = 800000000, + .pdf = 0, + .mfi = 8, + .mfd = 2, + .mfn = 1, + .cpu_podf = 0, + .cpu_voltage = 1100000,}, + { + .pll_rate = 800000000, + .cpu_rate = 166250000, + .pdf = 4, + .mfi = 8, + .mfd = 2, + .mfn = 1, + .cpu_podf = 4, + .cpu_voltage = 1000000,}, +}; + +struct cpu_wp *mx51_3stack_get_cpu_wp(int *wp) +{ + *wp = num_cpu_wp; + return cpu_wp_auto; +} + +void mx51_3stack_set_num_cpu_wp(int num) +{ + num_cpu_wp = num; + return; +} + +static void mxc_nop_release(struct device *dev) +{ + /* Nothing */ +} + +#if defined(CONFIG_KEYBOARD_MXC) || defined(CONFIG_KEYBOARD_MXC_MODULE) +static u16 keymapping[24] = { + KEY_1, KEY_2, KEY_3, KEY_F1, KEY_UP, KEY_F2, + KEY_4, KEY_5, KEY_6, KEY_LEFT, KEY_SELECT, KEY_RIGHT, + KEY_7, KEY_8, KEY_9, KEY_F3, KEY_DOWN, KEY_F4, + KEY_0, KEY_OK, KEY_ESC, KEY_ENTER, KEY_MENU, KEY_BACK, +}; + +static struct resource mxc_kpp_resources[] = { + [0] = { + .start = MXC_INT_KPP, + .end = MXC_INT_KPP, + .flags = IORESOURCE_IRQ, + } +}; + +static struct keypad_data keypad_plat_data = { + .rowmax = 4, + .colmax = 6, + .irq = MXC_INT_KPP, + .learning = 0, + .delay = 2, + .matrix = keymapping, +}; + +/* mxc keypad driver */ +static struct platform_device mxc_keypad_device = { + .name = "mxc_keypad", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_kpp_resources), + .resource = mxc_kpp_resources, + .dev = { + .release = mxc_nop_release, + .platform_data = &keypad_plat_data, + }, +}; + +static void mxc_init_keypad(void) +{ + (void)platform_device_register(&mxc_keypad_device); +} +#else +static inline void mxc_init_keypad(void) +{ +} +#endif + +/* NAND Flash Partitions */ +#ifdef CONFIG_MTD_PARTITIONS + +static struct mtd_partition nand_flash_partitions[] = { + { + .name = "bootloader", + .offset = 0, + .size = 3 * 1024 * 1024}, + { + .name = "nand.kernel", + .offset = MTDPART_OFS_APPEND, + .size = 5 * 1024 * 1024}, + { + .name = "nand.rootfs", + .offset = MTDPART_OFS_APPEND, + .size = 256 * 1024 * 1024}, + { + .name = "nand.userfs1", + .offset = MTDPART_OFS_APPEND, + .size = 256 * 1024 * 1024}, + { + .name = "nand.userfs2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL}, +}; + +#endif + +/* MTD NAND flash */ +#if defined(CONFIG_MTD_NAND_MXC) \ + || defined(CONFIG_MTD_NAND_MXC_MODULE) \ + || defined(CONFIG_MTD_NAND_MXC_V2) \ + || defined(CONFIG_MTD_NAND_MXC_V2_MODULE) \ + || defined(CONFIG_MTD_NAND_MXC_V3) \ + || defined(CONFIG_MTD_NAND_MXC_V3_MODULE) + +extern void gpio_nand_active(void); +extern void gpio_nand_inactive(void); + +static int nand_init(void) +{ + /* Configure the pins */ + gpio_nand_active(); + return 0; +} + +static void nand_exit(void) +{ + /* Free the pins */ + gpio_nand_inactive(); +} + +static struct flash_platform_data mxc_nand_data = { + #ifdef CONFIG_MTD_PARTITIONS + .parts = nand_flash_partitions, + .nr_parts = ARRAY_SIZE(nand_flash_partitions), + #endif + .width = 1, + .init = nand_init, + .exit = nand_exit, +}; + +static struct platform_device mxc_nandv2_mtd_device = { + .name = "mxc_nandv2_flash", + .id = 0, + .dev = { + .release = mxc_nop_release, + .platform_data = &mxc_nand_data, + }, +}; + +static void mxc_init_nand_mtd(void) +{ + (void)platform_device_register(&mxc_nandv2_mtd_device); +} +#else +static inline void mxc_init_nand_mtd(void) +{ +} +#endif + +/* i.MX MTD NAND Flash Controller */ + +#if defined(CONFIG_MTD_NAND_IMX_NFC) || defined(CONFIG_MTD_NAND_IMX_NFC_MODULE) + +/* Resources for this device. */ + +static struct resource imx_nfc_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = NFC_BASE_ADDR_AXI + 0x0000, + .end = NFC_BASE_ADDR_AXI + 0x1200 - 1, + .name = IMX_NFC_BUFFERS_ADDR_RES_NAME, + }, + { + .flags = IORESOURCE_MEM, + .start = NFC_BASE_ADDR_AXI + 0x1E00, + .end = NFC_BASE_ADDR_AXI + 0x1E44 - 1, + .name = IMX_NFC_PRIMARY_REGS_ADDR_RES_NAME, + }, + { + .flags = IORESOURCE_MEM, + .start = NFC_BASE_ADDR + 0x00, + .end = NFC_BASE_ADDR + 0x34 - 1, + .name = IMX_NFC_SECONDARY_REGS_ADDR_RES_NAME, + }, + { + .flags = IORESOURCE_IRQ, + .start = MXC_INT_NFC, + .end = MXC_INT_NFC, + .name = IMX_NFC_INTERRUPT_RES_NAME, + }, +}; + +/* + * Platform-specific information about this device. Some of the details depend + * on the SoC. See imx_init_nfc() below for code that fills in the rest. + */ + +static struct imx_nfc_platform_data imx_nfc_platform_data = { + .nfc_major_version = 3, + .nfc_minor_version = 2, + .force_ce = false, + .target_cycle_in_ns = 30, + .clock_name = "nfc_clk", + .set_page_size = 0, + .interleave = false, + #ifdef CONFIG_MTD_PARTITIONS + .partitions = nand_flash_partitions, + .partition_count = ARRAY_SIZE(nand_flash_partitions), + #endif +}; + +/* The structure that represents the NFC device. */ + +static struct platform_device imx_nfc_device = { + .name = IMX_NFC_DRIVER_NAME, + .id = 0, + .dev = { + .release = mxc_nop_release, + .platform_data = &imx_nfc_platform_data, + }, + .resource = imx_nfc_resources, + .num_resources = ARRAY_SIZE(imx_nfc_resources), +}; + +/** + * imx_init_nfc() - Sets up the NFC for this platform. + * + * This function sets up data structures representing the NFC device on this + * platform and registers the device with the platform management system. + */ + +static void imx_nfc_init(void) +{ + (void)platform_device_register(&imx_nfc_device); +} + +#else + +static inline void imx_nfc_init(void) +{ +} + +#endif /* i.MX MTD NAND Flash Controller */ + +#if defined(CONFIG_FB_MXC_SYNC_PANEL) || \ + defined(CONFIG_FB_MXC_SYNC_PANEL_MODULE) + +static struct mxc_fb_platform_data fb_data[] = { + { + .interface_pix_fmt = IPU_PIX_FMT_RGB666, + }, + { + .interface_pix_fmt = IPU_PIX_FMT_YUV444, + }, +}; + +static struct platform_device mxc_fb_device[] = { + { + .name = "mxc_sdc_fb", + .id = 0, + .dev = { + .release = mxc_nop_release, + .coherent_dma_mask = 0xFFFFFFFF, + .platform_data = &fb_data[0], + }, + }, + { + .name = "mxc_sdc_fb", + .id = 1, + .dev = { + .release = mxc_nop_release, + .coherent_dma_mask = 0xFFFFFFFF, + .platform_data = &fb_data[1], + }, + }, + { + .name = "mxc_sdc_fb", + .id = 2, + .dev = { + .release = mxc_nop_release, + .coherent_dma_mask = 0xFFFFFFFF, + }, + }, +}; + +static void lcd_reset_to2(void) +{ + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_DI1_D1_CS), 0); + ipu_reset_disp_panel(); + + return; +} + +static void lcd_reset(void) +{ + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_DISPB2_SER_RS), 0); + gpio_request(IOMUX_TO_GPIO(MX51_PIN_DISPB2_SER_RS), "ser_rs"); + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_DISPB2_SER_RS), 0); + /* do reset */ + msleep(10); /* tRES >= 100us */ + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_DISPB2_SER_RS), 1); + msleep(60); +} + +static struct mxc_lcd_platform_data lcd_data = { + .core_reg = "VIOHI", + .io_reg = "SW4", + .reset = lcd_reset, +}; + +static struct platform_device mxc_lcd_device = { + .name = "lcd_spi", + .dev = { + .release = mxc_nop_release, + .platform_data = &lcd_data, + }, +}; + +static void wvga_reset(void) +{ + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_DI1_D1_CS), 1); +} + +static struct mxc_lcd_platform_data lcd_wvga_data = { + .reset = wvga_reset, +}; + +static struct platform_device lcd_wvga_device = { + .name = "lcd_claa", + .dev = { + .release = mxc_nop_release, + .platform_data = &lcd_wvga_data, + }, +}; + +static void mxc_init_fb(void) +{ + + if (cpu_is_mx51_rev(CHIP_REV_2_0) > 0) + lcd_data.reset = lcd_reset_to2; + + (void)platform_device_register(&mxc_lcd_device); + (void)platform_device_register(&lcd_wvga_device); + + (void)platform_device_register(&mxc_fb_device[0]); + (void)platform_device_register(&mxc_fb_device[1]); + (void)platform_device_register(&mxc_fb_device[2]); +} +#else +static inline void mxc_init_fb(void) +{ +} +#endif + +static struct platform_device mxcbl_device = { + .name = "mxc_mc13892_bl", +}; + +static inline void mxc_init_bl(void) +{ + platform_device_register(&mxcbl_device); +} + +void si4702_reset(void) +{ + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_DTACK), 0); + msleep(100); + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_DTACK), 1); + msleep(100); +} + +void si4702_clock_ctl(int flag) +{ +} + +static void si4702_gpio_get(void) +{ + /* reset pin */ + gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_DTACK), "eim_dtack"); + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_DTACK), 0); +} + +static void si4702_gpio_put(void) +{ +} + +static struct mxc_fm_platform_data si4702_data = { + .reg_vio = "SW4", + .reg_vdd = "VIOHI", + .gpio_get = si4702_gpio_get, + .gpio_put = si4702_gpio_put, + .reset = si4702_reset, + .clock_ctl = si4702_clock_ctl, + .sksnr = 0, + .skcnt = 0, + .band = 0, + .space = 100, + .seekth = 0xa, +}; + +#if defined(CONFIG_I2C_MXC) || defined(CONFIG_I2C_MXC_MODULE) + +#ifdef CONFIG_I2C_MXC_SELECT1 +static struct i2c_board_info mxc_i2c0_board_info[] __initdata = { +}; +#endif +#ifdef CONFIG_I2C_MXC_SELECT2 +static struct i2c_board_info mxc_i2c1_board_info[] __initdata = { + { + .type = "wm8903-i2c", + .addr = 0x1a, + }, + { + .type = "sgtl5000-i2c", + .addr = 0x0a, + }, + { + .type = "tsc2007", + .addr = 0x48, + .irq = IOMUX_TO_IRQ(MX51_PIN_GPIO1_5), + }, + { + .type = "si4702", + .addr = 0x10, + .platform_data = (void *)&si4702_data, + }, +}; +#endif +#if defined(CONFIG_I2C_MXC_HS) || defined(CONFIG_I2C_MXC_HS_MODULE) +static struct mxc_camera_platform_data camera_data = { + .io_regulator = "SW4", + .analog_regulator = "VIOHI", + .mclk = 24000000, + .csi = 0, +}; +static struct mxc_lightsensor_platform_data ls_data = { + .vdd_reg = NULL, + .rext = 100, +}; + +static struct i2c_board_info mxc_i2c_hs_board_info[] __initdata = { + { + .type = "ov3640", + .addr = 0x3C, + .platform_data = (void *)&camera_data, + }, + { + .type = "isl29003", + .addr = 0x44, + .platform_data = &ls_data, + }, +}; +#endif + +#endif + +static u32 cpld_base_addr; + +/*lan9217 device*/ +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +static struct resource smsc911x_resources[] = { + { + .flags = IORESOURCE_MEM, + }, + { + .start = LAN9217_IRQ, + .end = LAN9217_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; +static struct platform_device smsc_lan9217_device = { + .name = "smsc911x", + .id = 0, + .dev = { + .release = mxc_nop_release, + }, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, +}; +static void mxc_init_enet(void) +{ + if (cpld_base_addr) { + smsc_lan9217_device.resource[0].start = + LAN9217_BASE_ADDR(cpld_base_addr); + smsc_lan9217_device.resource[0].end = + LAN9217_BASE_ADDR(cpld_base_addr) + 0x100; + (void)platform_device_register(&smsc_lan9217_device); + } +} +#else +static inline void mxc_init_enet(void) +{ +} +#endif + +#if defined(CONFIG_IMX_SIM) || defined(CONFIG_IMX_SIM_MODULE) +/* Used to configure the SIM bus */ +static struct mxc_sim_platform_data sim_data = { + .clk_rate = 4000000, + .clock_sim = "sim_clk", + .power_sim = NULL, + .init = NULL, + .exit = NULL, + .detect = 0, +}; + +/*! + * Resource definition for the SIM + */ +static struct resource mxc_sim_resources[] = { + [0] = { + .start = SIM_BASE_ADDR, + .end = SIM_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MXC_INT_SIM_IPB, + .end = MXC_INT_SIM_IPB, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = MXC_INT_SIM_DAT, + .end = MXC_INT_SIM_DAT, + .flags = IORESOURCE_IRQ, + }, +}; + +/*! Device Definition for IMX SIM */ +static struct platform_device mxc_sim_device = { + .name = "mxc_sim", + .id = 0, + .dev = { + .release = mxc_nop_release, + .platform_data = &sim_data, + }, + .num_resources = ARRAY_SIZE(mxc_sim_resources), + .resource = mxc_sim_resources, +}; + +static inline void mxc_init_sim(void) +{ + (void)platform_device_register(&mxc_sim_device); +} +#else +static inline void mxc_init_sim(void) +{ +} +#endif + +#if defined(CONFIG_MMC_IMX_ESDHCI) || defined(CONFIG_MMC_IMX_ESDHCI_MODULE) +/*! + * Get WP pin value to detect write protection + */ +int sdhc_write_protect(struct device *dev) +{ + unsigned short rc = 0; + + if (to_platform_device(dev)->id == 0) + rc = gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1)); + else + rc = 0; + return rc; +} + +/* + * Probe for the card. If present the GPIO data would be set. + */ +unsigned int sdhc_get_card_det_status(struct device *dev) +{ + int ret; + + if (to_platform_device(dev)->id == 0) { + ret = gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0)); + return ret; + } else { /* config the det pin for SDHC2 */ + return 0; + } +} + +static struct mxc_mmc_platform_data mmc1_data = { + .ocr_mask = MMC_VDD_32_33, + .caps = MMC_CAP_4_BIT_DATA, + .min_clk = 150000, + .max_clk = 52000000, + .card_inserted_state = 0, + .status = sdhc_get_card_det_status, + .wp_status = sdhc_write_protect, + .clock_mmc = "esdhc_clk", + .power_mmc = NULL, +}; +static struct mxc_mmc_platform_data mmc2_data = { + .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | + MMC_VDD_31_32, + .caps = MMC_CAP_4_BIT_DATA, + .min_clk = 150000, + .max_clk = 50000000, + .card_inserted_state = 0, + .status = sdhc_get_card_det_status, + .wp_status = sdhc_write_protect, + .clock_mmc = "esdhc_clk", +}; + +/*! + * Resource definition for the SDHC1 + */ +static struct resource mxcsdhc1_resources[] = { + [0] = { + .start = MMC_SDHC1_BASE_ADDR, + .end = MMC_SDHC1_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MXC_INT_MMC_SDHC1, + .end = MXC_INT_MMC_SDHC1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IOMUX_TO_IRQ(MX51_PIN_GPIO1_0), + .end = IOMUX_TO_IRQ(MX51_PIN_GPIO1_0), + .flags = IORESOURCE_IRQ, + }, +}; + +/*! + * Resource definition for the SDHC2 + */ +static struct resource mxcsdhc2_resources[] = { + [0] = { + .start = MMC_SDHC2_BASE_ADDR, + .end = MMC_SDHC2_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MXC_INT_MMC_SDHC2, + .end = MXC_INT_MMC_SDHC2, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ, + }, +}; + +/*! Device Definition for MXC SDHC1 */ +static struct platform_device mxcsdhc1_device = { + .name = "mxsdhci", + .id = 0, + .dev = { + .release = mxc_nop_release, + .platform_data = &mmc1_data, + }, + .num_resources = ARRAY_SIZE(mxcsdhc1_resources), + .resource = mxcsdhc1_resources, +}; + +/*! Device Definition for MXC SDHC2 */ +static struct platform_device mxcsdhc2_device = { + .name = "mxsdhci", + .id = 1, + .dev = { + .release = mxc_nop_release, + .platform_data = &mmc2_data, + }, + .num_resources = ARRAY_SIZE(mxcsdhc2_resources), + .resource = mxcsdhc2_resources, +}; + +static inline void mxc_init_mmc(void) +{ + (void)platform_device_register(&mxcsdhc1_device); + (void)platform_device_register(&mxcsdhc2_device); +} +#else +static inline void mxc_init_mmc(void) +{ +} +#endif + +static u32 brd_io; +static void expio_ack_irq(u32 irq); + +static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc) +{ + u32 imr_val; + u32 int_valid; + u32 expio_irq; + + desc->chip->mask(irq); /* irq = gpio irq number */ + + imr_val = __raw_readw(brd_io + INTR_MASK_REG); + int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val; + + if (unlikely(!int_valid)) + goto out; + + expio_irq = MXC_BOARD_IRQ_START; + for (; int_valid != 0; int_valid >>= 1, expio_irq++) { + struct irq_desc *d; + if ((int_valid & 1) == 0) + continue; + d = irq_desc + expio_irq; + if (unlikely(!(d->handle_irq))) { + printk(KERN_ERR "\nEXPIO irq: %d unhandled\n", + expio_irq); + BUG(); /* oops */ + } + d->handle_irq(expio_irq, d); + } + + out: + desc->chip->ack(irq); + desc->chip->unmask(irq); +} + +/* + * Disable an expio pin's interrupt by setting the bit in the imr. + * @param irq an expio virtual irq number + */ +static void expio_mask_irq(u32 irq) +{ + u16 reg; + u32 expio = MXC_IRQ_TO_EXPIO(irq); + /* mask the interrupt */ + reg = __raw_readw(brd_io + INTR_MASK_REG); + reg |= (1 << expio); + __raw_writew(reg, brd_io + INTR_MASK_REG); +} + +/* + * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr. + * @param irq an expanded io virtual irq number + */ +static void expio_ack_irq(u32 irq) +{ + u32 expio = MXC_IRQ_TO_EXPIO(irq); + /* clear the interrupt status */ + __raw_writew(1 << expio, brd_io + INTR_RESET_REG); + __raw_writew(0, brd_io + INTR_RESET_REG); + /* mask the interrupt */ + expio_mask_irq(irq); +} + +/* + * Enable a expio pin's interrupt by clearing the bit in the imr. + * @param irq a expio virtual irq number + */ +static void expio_unmask_irq(u32 irq) +{ + u16 reg; + u32 expio = MXC_IRQ_TO_EXPIO(irq); + /* unmask the interrupt */ + reg = __raw_readw(brd_io + INTR_MASK_REG); + reg &= ~(1 << expio); + __raw_writew(reg, brd_io + INTR_MASK_REG); +} + +static struct irq_chip expio_irq_chip = { + .ack = expio_ack_irq, + .mask = expio_mask_irq, + .unmask = expio_unmask_irq, +}; + +static int __init mxc_expio_init(void) +{ + int i; + + brd_io = (u32) ioremap(BOARD_IO_ADDR(CS5_BASE_ADDR), SZ_4K); + if (brd_io == 0) + return -ENOMEM; + + if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) || + (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) || + (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) { + pr_info("3-Stack Debug board not detected \n"); + cpld_base_addr = 0; + return -ENODEV; + } else { + cpld_base_addr = CS5_BASE_ADDR; + } + + pr_info("3-Stack Debug board detected, rev = 0x%04X\n", + readw(brd_io + CPLD_CODE_VER_REG)); + + /* + * Configure INT line as GPIO input + */ + gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_6), "gpio1_6"); + gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_6)); + + /* disable the interrupt and clear the status */ + __raw_writew(0, brd_io + INTR_MASK_REG); + __raw_writew(0xFFFF, brd_io + INTR_RESET_REG); + __raw_writew(0, brd_io + INTR_RESET_REG); + __raw_writew(0x1F, brd_io + INTR_MASK_REG); + for (i = MXC_BOARD_IRQ_START; i < (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS); + i++) { + set_irq_chip(i, &expio_irq_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + set_irq_type(EXPIO_PARENT_INT, IRQF_TRIGGER_LOW); + set_irq_chained_handler(EXPIO_PARENT_INT, mxc_expio_irq_handler); + + return 0; +} + +#if defined(CONFIG_PATA_FSL) || defined(CONFIG_PATA_FSL_MODULE) +extern void gpio_ata_active(void); +extern void gpio_ata_inactive(void); + +static int ata_init(struct platform_device *pdev) +{ + /* Configure the pins */ + gpio_ata_active(); + return 0; +} + +static void ata_exit(void) +{ + /* Free the pins */ + gpio_ata_inactive(); +} + +static struct fsl_ata_platform_data ata_data = { + .udma_mask = ATA_UDMA3, + .mwdma_mask = ATA_MWDMA2, + .pio_mask = ATA_PIO4, + .fifo_alarm = MXC_IDE_DMA_WATERMARK / 2, + .max_sg = MXC_IDE_DMA_BD_NR, + .init = ata_init, + .exit = ata_exit, + .core_reg = NULL, + .io_reg = NULL, +}; + +static struct resource pata_fsl_resources[] = { + [0] = { + .start = ATA_BASE_ADDR, + .end = ATA_BASE_ADDR + 0x000000C8, + .flags = IORESOURCE_MEM,}, + [2] = { + .start = MXC_INT_ATA, + .end = MXC_INT_ATA, + .flags = IORESOURCE_IRQ,}, +}; + +static struct platform_device pata_fsl_device = { + .name = "pata_fsl", + .id = -1, + .num_resources = ARRAY_SIZE(pata_fsl_resources), + .resource = pata_fsl_resources, + .dev = { + .platform_data = &ata_data, + .coherent_dma_mask = ~0,}, +}; + +static void __init mxc_init_pata(void) +{ + (void)platform_device_register(&pata_fsl_device); +} +#else /* CONFIG_PATA_FSL */ +static void __init mxc_init_pata(void) +{ +} +#endif /* CONFIG_PATA_FSL */ + +#if defined(CONFIG_TOUCHSCREEN_TSC2007) \ + || defined(CONFIG_TOUCHSCREEN_TSC2007_MODULE) + +static int __init mxc_init_touchscreen(void) +{ + gpio_request(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), "gpio1_5"); + gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5)); + + return 0; +} +#else +static int __init mxc_init_touchscreen(void) +{ + return 0; +} +#endif + +static int __init mxc_init_srpgconfig(void) +{ + struct clk *gpcclk = clk_get(NULL, "gpc_dvfs_clk"); + clk_enable(gpcclk); + + /* Setup the number of clock cycles to wait for SRPG + * power up and power down requests. + */ + __raw_writel(0x010F0201, MXC_SRPG_ARM_PUPSCR); + __raw_writel(0x010F0201, MXC_SRPG_NEON_PUPSCR); + __raw_writel(0x00000008, MXC_SRPG_EMPGC0_PUPSCR); + __raw_writel(0x00000008, MXC_SRPG_EMPGC1_PUPSCR); + + __raw_writel(0x01010101, MXC_SRPG_ARM_PDNSCR); + __raw_writel(0x01010101, MXC_SRPG_NEON_PDNSCR); + __raw_writel(0x00000018, MXC_SRPG_EMPGC0_PDNSCR); + __raw_writel(0x00000018, MXC_SRPG_EMPGC1_PDNSCR); + + clk_disable(gpcclk); + clk_put(gpcclk); + + return 0; +} + +#if defined(CONFIG_SND_SOC_IMX_3STACK_WM8903) \ + || defined(CONFIG_SND_SOC_IMX_3STACK_WM8903_MODULE) +static struct mxc_audio_platform_data wm8903_data; + +static struct platform_device mxc_wm8903_device = { + .name = "imx-3stack-wm8903", + .id = 0, + .dev = { + .release = mxc_nop_release, + .platform_data = &wm8903_data, + }, +}; + +static void __init mxc_init_wm8903(void) +{ + wm8903_data.ssi_clk[0] = clk_get(NULL, "ssi_clk.0"); + clk_put(wm8903_data.ssi_clk[0]); + + wm8903_data.ssi_clk[1] = clk_get(NULL, "ssi_clk.1"); + clk_put(wm8903_data.ssi_clk[1]); + + wm8903_data.ssi_num = 1; + wm8903_data.src_port = 2; + wm8903_data.ext_port = 3; + + (void)platform_device_register(&mxc_wm8903_device); +} +#else +static void __init mxc_init_wm8903(void) +{ +} +#endif + +#if defined(CONFIG_SND_SOC_IMX_3STACK_SGTL5000) \ + || defined(CONFIG_SND_SOC_IMX_3STACK_SGTL5000_MODULE) +static int mxc_sgtl5000_plat_init(void); +static int mxc_sgtl5000_plat_finit(void); +static int mxc_sgtl5000_amp_enable(int enable); + +int headphone_det_status(void) +{ + return gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A26)); +} + +static struct mxc_audio_platform_data sgtl5000_data = { + .ssi_num = 1, + .src_port = 2, + .ext_port = 3, + .hp_irq = IOMUX_TO_IRQ(MX51_PIN_EIM_A26), + .hp_status = headphone_det_status, + .amp_enable = mxc_sgtl5000_amp_enable, + .vddio = 1800000, + .vdda = 1800000, + .vddd = 1200000, + .sysclk = 12000000, + .init = mxc_sgtl5000_plat_init, + .finit = mxc_sgtl5000_plat_finit, +}; + +static struct platform_device mxc_sgtl5000_device = { + .name = "imx-3stack-sgtl5000", + .dev = { + .release = mxc_nop_release, + .platform_data = &sgtl5000_data, + }, +}; + +static int mxc_sgtl5000_plat_init(void) +{ + struct regulator *reg; + reg = regulator_get(&mxc_sgtl5000_device.dev, "GPO2"); + if (IS_ERR(reg)) + return -EINVAL; + sgtl5000_data.priv = reg; + return 0; +} + +static int mxc_sgtl5000_plat_finit(void) +{ + struct regulator *reg; + reg = sgtl5000_data.priv; + if (reg) { + regulator_put(reg); + sgtl5000_data.priv = NULL; + } + return 0; +} + +static int mxc_sgtl5000_amp_enable(int enable) +{ + struct regulator *reg; + reg = sgtl5000_data.priv; + + if (!reg) + return -EINVAL; + if (enable) + regulator_enable(reg); + else + regulator_disable(reg); + return 0; +} + +static void mxc_init_sgtl5000(void) +{ + platform_device_register(&mxc_sgtl5000_device); +} +#else +static inline void mxc_init_sgtl5000(void) +{ +} +#endif + +static void bt_reset(void) +{ + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_D19), 1); +} + +static struct mxc_bt_platform_data mxc_bt_data = { + .bt_vdd = NULL, + .bt_vdd_parent = NULL, + .bt_vusb = "SW4", + .bt_vusb_parent = NULL, + .bt_reset = bt_reset, +}; + +static struct platform_device mxc_bt_device = { + .name = "mxc_bt", + .id = 0, + .dev = { + .release = mxc_nop_release, + .platform_data = &mxc_bt_data, + }, +}; + +static void mxc_init_bluetooth(void) +{ + (void)platform_device_register(&mxc_bt_device); +} + +static void mxc_unifi_hardreset(int pin_level) +{ + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_D19), pin_level & 0x01); +} + +static struct mxc_unifi_platform_data unifi_data = { + .hardreset = mxc_unifi_hardreset, + .reg_vdd_vpa = "VSD", + .reg_1v5_dd = "VGEN1", + .host_id = 1, +}; + +struct mxc_unifi_platform_data *get_unifi_plat_data(void) +{ + return &unifi_data; +} + +EXPORT_SYMBOL(get_unifi_plat_data); + +/*! + * Board specific fixup function. It is called by \b setup_arch() in + * setup.c file very early on during kernel starts. It allows the user to + * statically fill in the proper values for the passed-in parameters. None of + * the parameters is used currently. + * + * @param desc pointer to \b struct \b machine_desc + * @param tags pointer to \b struct \b tag + * @param cmdline pointer to the command line + * @param mi pointer to \b struct \b meminfo + */ +static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags, + char **cmdline, struct meminfo *mi) +{ + mxc_cpu_init(); + + get_cpu_wp = mx51_3stack_get_cpu_wp; + set_num_cpu_wp = mx51_3stack_set_num_cpu_wp; +#ifdef CONFIG_DISCONTIGMEM + do { + int nid; + mi->nr_banks = MXC_NUMNODES; + for (nid = 0; nid < mi->nr_banks; nid++) + SET_NODE(mi, nid); + + } while (0); +#endif +} + +#if defined(CONFIG_GPS_IOCTRL) || defined(CONFIG_GPS_IOCTRL_MODULE) +static struct mxc_gps_platform_data gps_data = { + .core_reg = "VIOHI", + .analog_reg = "SW4", +}; + +static struct platform_device mxc_gps_device = { + .name = "gps_ioctrl", + .id = -1, + .dev = { + .platform_data = &gps_data, + }, +}; + +static void __init mxc_init_gps(void) +{ + (void)platform_device_register(&mxc_gps_device); +} + +int gpio_gps_access(int para) +{ + iomux_pin_name_t pin; + pin = (para & 0x1) ? MX51_PIN_EIM_CS2 : MX51_PIN_EIM_CRE; + + if (para & 0x4) /* Read GPIO */ + return gpio_get_value(IOMUX_TO_GPIO(pin)); + else if (para & 0x2) /* Write GPIO */ + gpio_set_value(IOMUX_TO_GPIO(pin), 1); + else + gpio_set_value(IOMUX_TO_GPIO(pin), 0); + return 0; +} +EXPORT_SYMBOL(gpio_gps_access); +#else +static void __init mxc_init_gps(void) +{ +} +#endif + +/*! + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + int err; + + mxc_cpu_common_init(); + mxc_register_gpios(); + mx51_3stack_io_init(); + early_console_setup(saved_command_line); + mxc_init_devices(); + + mxc_expio_init(); + mxc_init_enet(); + mxc_init_pata(); + mxc_init_fb(); + mxc_init_bl(); + mxc_init_keypad(); + mxc_init_nand_mtd(); + imx_nfc_init(); + mxc_init_mmc(); + mxc_init_sim(); + mxc_init_srpgconfig(); + mx51_3stack_init_mc13892(); + +#if defined(CONFIG_I2C_MXC) || defined(CONFIG_I2C_MXC_MODULE) + +#ifdef CONFIG_I2C_MXC_SELECT1 + i2c_register_board_info(0, mxc_i2c0_board_info, + ARRAY_SIZE(mxc_i2c0_board_info)); +#endif +#ifdef CONFIG_I2C_MXC_SELECT2 + i2c_register_board_info(1, mxc_i2c1_board_info, + ARRAY_SIZE(mxc_i2c1_board_info)); +#endif +#if defined(CONFIG_I2C_MXC_HS) || defined(CONFIG_I2C_MXC_HS_MODULE) + i2c_register_board_info(3, mxc_i2c_hs_board_info, + ARRAY_SIZE(mxc_i2c_hs_board_info)); +#endif + +#endif + mxc_init_touchscreen(); + mxc_init_wm8903(); + mxc_init_sgtl5000(); + mxc_init_bluetooth(); + mxc_init_gps(); + + err = mxc_request_iomux(MX51_PIN_EIM_D19, IOMUX_CONFIG_GPIO); + if (err) + printk(KERN_ERR "Error: bt reset request gpio failed!\n"); + else { + gpio_request(IOMUX_TO_GPIO(MX51_PIN_EIM_D19), "eim_d19"); + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_D19), 0); + } +} + +static void __init mx51_3stack_timer_init(void) +{ + mx51_clocks_init(32768, 24000000, 22579200, 24576000); +} + +static struct sys_timer mxc_timer = { + .init = mx51_3stack_timer_init, +}; + +/* + * The following uses standard kernel macros define in arch.h in order to + * initialize __mach_desc_MX51_3STACK data structure. + */ +/* *INDENT-OFF* */ +MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board") + /* Maintainer: Freescale Semiconductor, Inc. */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .fixup = fixup_mxc_board, + .map_io = mx51_map_io, + .init_irq = mxc_init_irq, + .init_machine = mxc_board_init, + .timer = &mxc_timer, +MACHINE_END |