diff options
Diffstat (limited to 'arch/arm/mach-mx6/board-mx6q_sabrelite.c')
-rw-r--r-- | arch/arm/mach-mx6/board-mx6q_sabrelite.c | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/arch/arm/mach-mx6/board-mx6q_sabrelite.c b/arch/arm/mach-mx6/board-mx6q_sabrelite.c index 24914fe6904b..338c16ab6a52 100644 --- a/arch/arm/mach-mx6/board-mx6q_sabrelite.c +++ b/arch/arm/mach-mx6/board-mx6q_sabrelite.c @@ -94,6 +94,13 @@ #define MX6Q_SABRELITE_CSI0_RST IMX_GPIO_NR(1, 8) #define MX6Q_SABRELITE_CSI0_PWN IMX_GPIO_NR(1, 6) +#ifdef CONFIG_MX6_ENET_IRQ_TO_GPIO +#define MX6_ENET_IRQ IMX_GPIO_NR(1, 6) +#define IOMUX_OBSRV_MUX1_OFFSET 0x3c +#define OBSRV_MUX1_MASK 0x3f +#define OBSRV_MUX1_ENET_IRQ 0x9 +#endif + #define MX6Q_SABRELITE_SD3_WP_PADCFG (PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_HYS) @@ -322,7 +329,9 @@ static iomux_v3_cfg_t mx6q_sabrelite_csi0_sensor_pads[] = { MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC, MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK, MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC, +#ifndef CONFIG_MX6_ENET_IRQ_TO_GPIO MX6Q_PAD_GPIO_6__GPIO_1_6, /* J5 - Camera GP */ +#endif MX6Q_PAD_GPIO_8__GPIO_1_8, /* J5 - Camera Reset */ MX6Q_PAD_SD1_DAT0__GPIO_1_16, /* J5 - Camera GP */ MX6Q_PAD_NANDF_D5__GPIO_2_5, /* J16 - MIPI GP */ @@ -468,6 +477,9 @@ static int mx6q_sabrelite_fec_phy_init(struct phy_device *phydev) static struct fec_platform_data fec_data __initdata = { .init = mx6q_sabrelite_fec_phy_init, .phy = PHY_INTERFACE_MODE_RGMII, +#ifdef CONFIG_MX6_ENET_IRQ_TO_GPIO + .gpio_irq = MX6_ENET_IRQ, +#endif }; static int mx6q_sabrelite_spi_cs[] = { @@ -1259,6 +1271,11 @@ static void __init mx6_sabrelite_board_init(void) imx6q_add_anatop_thermal_imx(1, &mx6q_sabrelite_anatop_thermal_data); imx6_init_fec(fec_data); +#ifdef CONFIG_MX6_ENET_IRQ_TO_GPIO + /* Make sure the IOMUX_OBSRV_MUX1 is set to ENET_IRQ. */ + mxc_iomux_set_specialbits_register(IOMUX_OBSRV_MUX1_OFFSET, + OBSRV_MUX1_ENET_IRQ, OBSRV_MUX1_MASK); +#endif imx6q_add_pm_imx(0, &mx6q_sabrelite_pm_data); imx6q_add_sdhci_usdhc_imx(3, &mx6q_sabrelite_sd4_data); imx6q_add_sdhci_usdhc_imx(2, &mx6q_sabrelite_sd3_data); |