diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-3430sdp.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-3430sdp.c | 122 |
1 files changed, 10 insertions, 112 deletions
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index bd600cfb7f80..383717ba63b9 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -33,11 +33,11 @@ #include <plat/mcspi.h> #include <plat/board.h> #include <plat/usb.h> -#include <plat/common.h> +#include "common.h" #include <plat/dma.h> #include <plat/gpmc.h> #include <video/omapdss.h> -#include <video/omap-panel-generic-dpi.h> +#include <video/omap-panel-dvi.h> #include <plat/gpmc-smc91x.h> @@ -186,8 +186,7 @@ static struct omap_dss_device sdp3430_lcd_device = { .platform_disable = sdp3430_panel_disable_lcd, }; -static struct panel_generic_dpi_data dvi_panel = { - .name = "generic", +static struct panel_dvi_platform_data dvi_panel = { .platform_enable = sdp3430_panel_enable_dvi, .platform_disable = sdp3430_panel_disable_dvi, }; @@ -195,7 +194,7 @@ static struct panel_generic_dpi_data dvi_panel = { static struct omap_dss_device sdp3430_dvi_device = { .name = "dvi", .type = OMAP_DISPLAY_TYPE_DPI, - .driver_name = "generic_dpi_panel", + .driver_name = "dvi", .data = &dvi_panel, .phy.dpi.data_lines = 24, }; @@ -225,12 +224,6 @@ static struct omap_dss_board_info sdp3430_dss_data = { static struct omap_board_config_kernel sdp3430_config[] __initdata = { }; -static void __init omap_3430sdp_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL); -} - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -482,106 +475,8 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; - -static struct omap_device_pad serial1_pads[] __initdata = { - /* - * Note that off output enable is an active low - * signal. So setting this means pin is a - * input enabled in off mode - */ - OMAP_MUX_STATIC("uart1_cts.uart1_cts", - OMAP_PIN_INPUT | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart1_rts.uart1_rts", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart1_rx.uart1_rx", - OMAP_PIN_INPUT | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart1_tx.uart1_tx", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), -}; - -static struct omap_device_pad serial2_pads[] __initdata = { - OMAP_MUX_STATIC("uart2_cts.uart2_cts", - OMAP_PIN_INPUT_PULLUP | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_rts.uart2_rts", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_rx.uart2_rx", - OMAP_PIN_INPUT | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart2_tx.uart2_tx", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), -}; - -static struct omap_device_pad serial3_pads[] __initdata = { - OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx", - OMAP_PIN_INPUT_PULLDOWN | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx", - OMAP_PIN_INPUT | - OMAP_PIN_OFF_INPUT_PULLDOWN | - OMAP_OFFOUT_EN | - OMAP_MUX_MODE0), - OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx", - OMAP_PIN_OUTPUT | - OMAP_OFF_EN | - OMAP_MUX_MODE0), -}; - -static struct omap_board_data serial1_data __initdata = { - .id = 0, - .pads = serial1_pads, - .pads_cnt = ARRAY_SIZE(serial1_pads), -}; - -static struct omap_board_data serial2_data __initdata = { - .id = 1, - .pads = serial2_pads, - .pads_cnt = ARRAY_SIZE(serial2_pads), -}; - -static struct omap_board_data serial3_data __initdata = { - .id = 2, - .pads = serial3_pads, - .pads_cnt = ARRAY_SIZE(serial3_pads), -}; - -static inline void board_serial_init(void) -{ - omap_serial_init_port(&serial1_data); - omap_serial_init_port(&serial2_data); - omap_serial_init_port(&serial3_data); -} #else #define board_mux NULL - -static inline void board_serial_init(void) -{ - omap_serial_init(); -} #endif /* @@ -718,7 +613,8 @@ static void __init omap_3430sdp_init(void) else gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1; omap_ads7846_init(1, gpio_pendown, 310, NULL); - board_serial_init(); + omap_serial_init(); + omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL); usb_musb_init(NULL); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); @@ -729,11 +625,13 @@ static void __init omap_3430sdp_init(void) MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ - .boot_params = 0x80000100, + .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = omap_3430sdp_init_early, + .init_early = omap3430_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap_3430sdp_init, .timer = &omap3_timer, + .restart = omap_prcm_restart, MACHINE_END |