diff options
Diffstat (limited to 'arch/arm/mach-omap2/omap_twl.c')
| -rw-r--r-- | arch/arm/mach-omap2/omap_twl.c | 166 |
1 files changed, 166 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index b8f08742a6f0..15f8c6c1bb0f 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -16,6 +16,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/kernel.h> +#include <linux/i2c/twl.h> #include <plat/voltage.h> @@ -37,6 +38,28 @@ #define OMAP3630_VP2_VLIMITTO_VDDMIN 0x18 #define OMAP3630_VP2_VLIMITTO_VDDMAX 0x30 +#define OMAP4_SRI2C_SLAVE_ADDR 0x12 +#define OMAP4_VDD_MPU_SR_VOLT_REG 0x55 +#define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B +#define OMAP4_VDD_CORE_SR_VOLT_REG 0x61 + +#define OMAP4_VP_CONFIG_ERROROFFSET 0x00 +#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01 +#define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04 +#define OMAP4_VP_VLIMITTO_TIMEOUT_US 200 + +#define OMAP4_VP_MPU_VLIMITTO_VDDMIN 0xA +#define OMAP4_VP_MPU_VLIMITTO_VDDMAX 0x39 +#define OMAP4_VP_IVA_VLIMITTO_VDDMIN 0xA +#define OMAP4_VP_IVA_VLIMITTO_VDDMAX 0x2D +#define OMAP4_VP_CORE_VLIMITTO_VDDMIN 0xA +#define OMAP4_VP_CORE_VLIMITTO_VDDMAX 0x28 + +static bool is_offset_valid; +static u8 smps_offset; + +#define REG_SMPS_OFFSET 0xE0 + unsigned long twl4030_vsel_to_uv(const u8 vsel) { return (((vsel * 125) + 6000)) * 100; @@ -47,6 +70,70 @@ u8 twl4030_uv_to_vsel(unsigned long uv) return DIV_ROUND_UP(uv - 600000, 12500); } +unsigned long twl6030_vsel_to_uv(const u8 vsel) +{ + /* + * In TWL6030 depending on the value of SMPS_OFFSET + * efuse register the voltage range supported in + * standard mode can be either between 0.6V - 1.3V or + * 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse + * is programmed to all 0's where as starting from + * TWL6030 ES1.1 the efuse is programmed to 1 + */ + if (!is_offset_valid) { + twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset, + REG_SMPS_OFFSET); + is_offset_valid = true; + } + + /* + * There is no specific formula for voltage to vsel + * conversion above 1.3V. There are special hardcoded + * values for voltages above 1.3V. Currently we are + * hardcoding only for 1.35 V which is used for 1GH OPP for + * OMAP4430. + */ + if (vsel == 0x3A) + return 1350000; + + if (smps_offset & 0x8) + return ((((vsel - 1) * 125) + 7000)) * 100; + else + return ((((vsel - 1) * 125) + 6000)) * 100; +} + +u8 twl6030_uv_to_vsel(unsigned long uv) +{ + /* + * In TWL6030 depending on the value of SMPS_OFFSET + * efuse register the voltage range supported in + * standard mode can be either between 0.6V - 1.3V or + * 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse + * is programmed to all 0's where as starting from + * TWL6030 ES1.1 the efuse is programmed to 1 + */ + if (!is_offset_valid) { + twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset, + REG_SMPS_OFFSET); + is_offset_valid = true; + } + + /* + * There is no specific formula for voltage to vsel + * conversion above 1.3V. There are special hardcoded + * values for voltages above 1.3V. Currently we are + * hardcoding only for 1.35 V which is used for 1GH OPP for + * OMAP4430. + */ + if (uv == 1350000) + return 0x3A; + + if (smps_offset & 0x8) + return DIV_ROUND_UP(uv - 700000, 12500) + 1; + else + return DIV_ROUND_UP(uv - 600000, 12500) + 1; +} + static struct omap_volt_pmic_info omap3_mpu_volt_info = { .slew_rate = 4000, .step_size = 12500, @@ -87,6 +174,85 @@ static struct omap_volt_pmic_info omap3_core_volt_info = { .uv_to_vsel = twl4030_uv_to_vsel, }; +static struct omap_volt_pmic_info omap4_mpu_volt_info = { + .slew_rate = 4000, + .step_size = 12500, + .on_volt = 1350000, + .onlp_volt = 1350000, + .ret_volt = 837500, + .off_volt = 600000, + .volt_setup_time = 0, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vp_vddmin = OMAP4_VP_MPU_VLIMITTO_VDDMIN, + .vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, + .pmic_reg = OMAP4_VDD_MPU_SR_VOLT_REG, + .vsel_to_uv = twl6030_vsel_to_uv, + .uv_to_vsel = twl6030_uv_to_vsel, +}; + +static struct omap_volt_pmic_info omap4_iva_volt_info = { + .slew_rate = 4000, + .step_size = 12500, + .on_volt = 1100000, + .onlp_volt = 1100000, + .ret_volt = 837500, + .off_volt = 600000, + .volt_setup_time = 0, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vp_vddmin = OMAP4_VP_IVA_VLIMITTO_VDDMIN, + .vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, + .pmic_reg = OMAP4_VDD_IVA_SR_VOLT_REG, + .vsel_to_uv = twl6030_vsel_to_uv, + .uv_to_vsel = twl6030_uv_to_vsel, +}; + +static struct omap_volt_pmic_info omap4_core_volt_info = { + .slew_rate = 4000, + .step_size = 12500, + .on_volt = 1100000, + .onlp_volt = 1100000, + .ret_volt = 837500, + .off_volt = 600000, + .volt_setup_time = 0, + .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, + .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, + .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, + .vp_vddmin = OMAP4_VP_CORE_VLIMITTO_VDDMIN, + .vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX, + .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, + .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, + .pmic_reg = OMAP4_VDD_CORE_SR_VOLT_REG, + .vsel_to_uv = twl6030_vsel_to_uv, + .uv_to_vsel = twl6030_uv_to_vsel, +}; + +int __init omap4_twl_init(void) +{ + struct voltagedomain *voltdm; + + if (!cpu_is_omap44xx()) + return -ENODEV; + + voltdm = omap_voltage_domain_lookup("mpu"); + omap_voltage_register_pmic(voltdm, &omap4_mpu_volt_info); + + voltdm = omap_voltage_domain_lookup("iva"); + omap_voltage_register_pmic(voltdm, &omap4_iva_volt_info); + + voltdm = omap_voltage_domain_lookup("core"); + omap_voltage_register_pmic(voltdm, &omap4_core_volt_info); + + return 0; +} + int __init omap3_twl_init(void) { struct voltagedomain *voltdm; |