summaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/serial.c')
-rw-r--r--arch/arm/mach-omap2/serial.c116
1 files changed, 48 insertions, 68 deletions
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 7d9444adc5df..4dcf39c285b9 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -3,7 +3,7 @@
*
* OMAP2 serial support.
*
- * Copyright (C) 2005 Nokia Corporation
+ * Copyright (C) 2005-2008 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
* Based off of arch/arm/mach-omap/omap1/serial.c
@@ -22,38 +22,34 @@
#include <mach/common.h>
#include <mach/board.h>
-static struct clk * uart1_ick = NULL;
-static struct clk * uart1_fck = NULL;
-static struct clk * uart2_ick = NULL;
-static struct clk * uart2_fck = NULL;
-static struct clk * uart3_ick = NULL;
-static struct clk * uart3_fck = NULL;
+static struct clk *uart_ick[OMAP_MAX_NR_PORTS];
+static struct clk *uart_fck[OMAP_MAX_NR_PORTS];
static struct plat_serial8250_port serial_platform_data[] = {
{
- .membase = (char *)IO_ADDRESS(OMAP_UART1_BASE),
- .mapbase = (unsigned long)OMAP_UART1_BASE,
+ .membase = IO_ADDRESS(OMAP_UART1_BASE),
+ .mapbase = OMAP_UART1_BASE,
.irq = 72,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = OMAP16XX_BASE_BAUD * 16,
+ .uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
- .membase = (char *)IO_ADDRESS(OMAP_UART2_BASE),
- .mapbase = (unsigned long)OMAP_UART2_BASE,
+ .membase = IO_ADDRESS(OMAP_UART2_BASE),
+ .mapbase = OMAP_UART2_BASE,
.irq = 73,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = OMAP16XX_BASE_BAUD * 16,
+ .uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
- .membase = (char *)IO_ADDRESS(OMAP_UART3_BASE),
- .mapbase = (unsigned long)OMAP_UART3_BASE,
+ .membase = IO_ADDRESS(OMAP_UART3_BASE),
+ .mapbase = OMAP_UART3_BASE,
.irq = 74,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = OMAP16XX_BASE_BAUD * 16,
+ .uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.flags = 0
}
@@ -70,7 +66,7 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
int value)
{
offset <<= p->regshift;
- __raw_writeb(value, (unsigned long)(p->membase + offset));
+ __raw_writeb(value, p->membase + offset);
}
/*
@@ -86,10 +82,27 @@ static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
}
-void __init omap_serial_init()
+void omap_serial_enable_clocks(int enable)
+{
+ int i;
+ for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+ if (uart_ick[i] && uart_fck[i]) {
+ if (enable) {
+ clk_enable(uart_ick[i]);
+ clk_enable(uart_fck[i]);
+ } else {
+ clk_disable(uart_ick[i]);
+ clk_disable(uart_fck[i]);
+ }
+ }
+ }
+}
+
+void __init omap_serial_init(void)
{
int i;
const struct omap_uart_config *info;
+ char name[16];
/*
* Make sure the serial ports are muxed on at this point.
@@ -97,8 +110,7 @@ void __init omap_serial_init()
* if not needed.
*/
- info = omap_get_config(OMAP_TAG_UART,
- struct omap_uart_config);
+ info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
if (info == NULL)
return;
@@ -107,58 +119,26 @@ void __init omap_serial_init()
struct plat_serial8250_port *p = serial_platform_data + i;
if (!(info->enabled_uarts & (1 << i))) {
- p->membase = 0;
+ p->membase = NULL;
p->mapbase = 0;
continue;
}
- switch (i) {
- case 0:
- uart1_ick = clk_get(NULL, "uart1_ick");
- if (IS_ERR(uart1_ick))
- printk("Could not get uart1_ick\n");
- else {
- clk_enable(uart1_ick);
- }
-
- uart1_fck = clk_get(NULL, "uart1_fck");
- if (IS_ERR(uart1_fck))
- printk("Could not get uart1_fck\n");
- else {
- clk_enable(uart1_fck);
- }
- break;
- case 1:
- uart2_ick = clk_get(NULL, "uart2_ick");
- if (IS_ERR(uart2_ick))
- printk("Could not get uart2_ick\n");
- else {
- clk_enable(uart2_ick);
- }
-
- uart2_fck = clk_get(NULL, "uart2_fck");
- if (IS_ERR(uart2_fck))
- printk("Could not get uart2_fck\n");
- else {
- clk_enable(uart2_fck);
- }
- break;
- case 2:
- uart3_ick = clk_get(NULL, "uart3_ick");
- if (IS_ERR(uart3_ick))
- printk("Could not get uart3_ick\n");
- else {
- clk_enable(uart3_ick);
- }
-
- uart3_fck = clk_get(NULL, "uart3_fck");
- if (IS_ERR(uart3_fck))
- printk("Could not get uart3_fck\n");
- else {
- clk_enable(uart3_fck);
- }
- break;
- }
+ sprintf(name, "uart%d_ick", i+1);
+ uart_ick[i] = clk_get(NULL, name);
+ if (IS_ERR(uart_ick[i])) {
+ printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
+ uart_ick[i] = NULL;
+ } else
+ clk_enable(uart_ick[i]);
+
+ sprintf(name, "uart%d_fck", i+1);
+ uart_fck[i] = clk_get(NULL, name);
+ if (IS_ERR(uart_fck[i])) {
+ printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
+ uart_fck[i] = NULL;
+ } else
+ clk_enable(uart_fck[i]);
omap_serial_reset(p);
}