diff options
Diffstat (limited to 'arch/arm/mach-omap2')
87 files changed, 1199 insertions, 4152 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index f4d06aea8460..6e249324fdd7 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -79,7 +79,9 @@ config ARCH_OMAP2PLUS select CLKSRC_MMIO select GENERIC_IRQ_CHIP select MACH_OMAP_GENERIC + select MEMORY select OMAP_DM_TIMER + select OMAP_GPMC select PINCTRL select SOC_BUS select TI_PRIV_EDMA @@ -235,12 +237,6 @@ config MACH_TOUCHBOOK default y select OMAP_PACKAGE_CBB -config MACH_OMAP_3430SDP - bool "OMAP 3430 SDP board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config MACH_NOKIA_N810 bool @@ -282,16 +278,6 @@ config MACH_SBC3530 default y select OMAP_PACKAGE_CUS -config MACH_TI8168EVM - bool "TI8168 Evaluation Module" - depends on SOC_TI81XX - default y - -config MACH_TI8148EVM - bool "TI8148 Evaluation Module" - depends on SOC_TI81XX - default y - config OMAP3_EMU bool "OMAP3 debugging peripherals" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index d9e94122073e..08cc94474d17 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -6,7 +6,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-omap/include # Common support -obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \ +obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ omap_device.o sram.o drm.o @@ -113,7 +113,7 @@ obj-y += prm_common.o cm_common.o obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o -omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \ +omap-prcm-4-5-common = cminst44xx.o prm44xx.o \ prcm_mpu44xx.o prminst44xx.o \ vc44xx_data.o vp44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) @@ -246,7 +246,6 @@ obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o obj-$(CONFIG_MACH_OVERO) += board-overo.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o -obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o @@ -260,8 +259,6 @@ obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o -obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o -obj-$(CONFIG_MACH_TI8148EVM) += board-ti8168evm.o # Platform specific device init code @@ -284,9 +281,6 @@ obj-y += $(onenand-m) $(onenand-y) nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o obj-y += $(nand-m) $(nand-y) -smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o -obj-y += $(smc91x-m) $(smc91x-y) - smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o obj-y += $(smsc911x-m) $(smsc911x-y) ifneq ($(CONFIG_HWSPINLOCK_OMAP),) diff --git a/arch/arm/mach-omap2/am33xx-restart.c b/arch/arm/mach-omap2/am33xx-restart.c index c88d8df753c2..5bace6a45ffb 100644 --- a/arch/arm/mach-omap2/am33xx-restart.c +++ b/arch/arm/mach-omap2/am33xx-restart.c @@ -9,8 +9,7 @@ #include <linux/reboot.h> #include "common.h" -#include "prm-regbits-33xx.h" -#include "prm33xx.h" +#include "prm.h" /** * am3xx_restart - trigger a software restart of the SoC @@ -24,12 +23,5 @@ void am33xx_restart(enum reboot_mode mode, const char *cmd) { /* TODO: Handle mode and cmd if necessary */ - am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK, - AM33XX_RST_GLOBAL_WARM_SW_MASK, - AM33XX_PRM_DEVICE_MOD, - AM33XX_PRM_RSTCTRL_OFFSET); - - /* OCP barrier */ - (void)am33xx_prm_read_reg(AM33XX_PRM_DEVICE_MOD, - AM33XX_PRM_RSTCTRL_OFFSET); + omap_prm_reset_system(); } diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c deleted file mode 100644 index d21a3048d06b..000000000000 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ /dev/null @@ -1,632 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-3430sdp.c - * - * Copyright (C) 2007 Texas Instruments - * - * Modified from mach-omap2/board-generic.c - * - * Initial code: Syed Mohammed Khasim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> -#include <linux/spi/spi.h> -#include <linux/i2c/twl.h> -#include <linux/regulator/machine.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/mmc/host.h> -#include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/platform_data/omap-twl4030.h> -#include <linux/usb/phy.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" -#include <linux/omap-dma.h> -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include "gpmc.h" -#include "gpmc-smc91x.h" - -#include "soc.h" -#include "board-flash.h" -#include "mux.h" -#include "sdram-qimonda-hyb18m512160af-6.h" -#include "hsmmc.h" -#include "pm.h" -#include "control.h" -#include "common-board-devices.h" - -#define CONFIG_DISABLE_HFCLK 1 - -#define SDP3430_TS_GPIO_IRQ_SDPV1 3 -#define SDP3430_TS_GPIO_IRQ_SDPV2 2 - -#define ENABLE_VAUX3_DEDICATED 0x03 -#define ENABLE_VAUX3_DEV_GRP 0x20 - -#define TWL4030_MSECURE_GPIO 22 - -static uint32_t board_keymap[] = { - KEY(0, 0, KEY_LEFT), - KEY(0, 1, KEY_RIGHT), - KEY(0, 2, KEY_A), - KEY(0, 3, KEY_B), - KEY(0, 4, KEY_C), - KEY(1, 0, KEY_DOWN), - KEY(1, 1, KEY_UP), - KEY(1, 2, KEY_E), - KEY(1, 3, KEY_F), - KEY(1, 4, KEY_G), - KEY(2, 0, KEY_ENTER), - KEY(2, 1, KEY_I), - KEY(2, 2, KEY_J), - KEY(2, 3, KEY_K), - KEY(2, 4, KEY_3), - KEY(3, 0, KEY_M), - KEY(3, 1, KEY_N), - KEY(3, 2, KEY_O), - KEY(3, 3, KEY_P), - KEY(3, 4, KEY_Q), - KEY(4, 0, KEY_R), - KEY(4, 1, KEY_4), - KEY(4, 2, KEY_T), - KEY(4, 3, KEY_U), - KEY(4, 4, KEY_D), - KEY(5, 0, KEY_V), - KEY(5, 1, KEY_W), - KEY(5, 2, KEY_L), - KEY(5, 3, KEY_S), - KEY(5, 4, KEY_H), - 0 -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data sdp3430_kp_data = { - .keymap_data = &board_map_data, - .rows = 5, - .cols = 6, - .rep = 1, -}; - -#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 -#define SDP3430_LCD_PANEL_ENABLE_GPIO 5 - -static void __init sdp3430_display_init(void) -{ - int r; - - /* - * the backlight GPIO doesn't directly go to the panel, it enables - * an internal circuit on 3430sdp to create the signal V_BKL_28V, - * this is connected to LED+ pin of the sharp panel. This GPIO - * is left enabled in the board file, and not passed to the panel - * as platform_data. - */ - r = gpio_request_one(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, - GPIOF_OUT_INIT_HIGH, "LCD Backlight"); - if (r) - pr_err("failed to get LCD Backlight GPIO\n"); - -} - -static struct panel_sharp_ls037v7dw01_platform_data sdp3430_lcd_pdata = { - .name = "lcd", - .source = "dpi.0", - - .data_lines = 16, - - .resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO, - .ini_gpio = -1, - .mo_gpio = -1, - .lr_gpio = -1, - .ud_gpio = -1, -}; - -static struct platform_device sdp3430_lcd_device = { - .name = "panel-sharp-ls037v7dw01", - .id = 0, - .dev.platform_data = &sdp3430_lcd_pdata, -}; - -static struct connector_dvi_platform_data sdp3430_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = -1, -}; - -static struct platform_device sdp3430_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &sdp3430_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data sdp3430_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = -1, -}; - -static struct platform_device sdp3430_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &sdp3430_tfp410_pdata, -}; - -static struct connector_atv_platform_data sdp3430_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, - .invert_polarity = false, -}; - -static struct platform_device sdp3430_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &sdp3430_tv_pdata, -}; - -static struct omap_dss_board_info sdp3430_dss_data = { - .default_display_name = "lcd", -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - /* 8 bits (default) requires S6.3 == ON, - * so the SIM card isn't used; else 4 bits. - */ - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - .gpio_wp = 4, - .deferred = true, - }, - { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - .gpio_wp = 7, - .deferred = true, - }, - {} /* Terminator */ -}; - -static struct omap_tw4030_pdata omap_twl4030_audio_data = { - .voice_connected = true, - .custom_routing = true, - - .has_hs = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, - .has_hf = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, - - .has_mainmic = true, - .has_submic = true, - .has_hsmic = true, - .has_linein = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT, -}; - -static int sdp3430_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ), - * gpio + 1 is "mmc1_cd" (input/IRQ) - */ - mmc[0].gpio_cd = gpio + 0; - mmc[1].gpio_cd = gpio + 1; - omap_hsmmc_late_init(mmc); - - /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */ - gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl"); - - /* gpio + 15 is "sub_lcd_nRST" (output) */ - gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST"); - - omap_twl4030_audio_data.jack_detect = gpio + 2; - omap_twl4030_audio_init("SDP3430", &omap_twl4030_audio_data); - - return 0; -} - -static struct twl4030_gpio_platform_data sdp3430_gpio_data = { - .pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13) - | BIT(16) | BIT(17), - .setup = sdp3430_twl_gpio_setup, -}; - -/* regulator consumer mappings */ - -/* ads7846 on SPI */ -static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = { - REGULATOR_SUPPLY("vcc", "spi1.0"), -}; - -static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply sdp3430_vsim_supplies[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), -}; - -/* - * Apply all the fixed voltages since most versions of U-Boot - * don't bother with that initialization. - */ - -/* VAUX1 for mainboard (irda and sub-lcd) */ -static struct regulator_init_data sdp3430_vaux1 = { - .constraints = { - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -/* VAUX2 for camera module */ -static struct regulator_init_data sdp3430_vaux2 = { - .constraints = { - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -/* VAUX3 for LCD board */ -static struct regulator_init_data sdp3430_vaux3 = { - .constraints = { - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(sdp3430_vaux3_supplies), - .consumer_supplies = sdp3430_vaux3_supplies, -}; - -/* VAUX4 for OMAP VDD_CSI2 (camera) */ -static struct regulator_init_data sdp3430_vaux4 = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data sdp3430_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc1_supplies), - .consumer_supplies = sdp3430_vmmc1_supplies, -}; - -/* VMMC2 for MMC2 card */ -static struct regulator_init_data sdp3430_vmmc2 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 1850000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc2_supplies), - .consumer_supplies = sdp3430_vmmc2_supplies, -}; - -/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ -static struct regulator_init_data sdp3430_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(sdp3430_vsim_supplies), - .consumer_supplies = sdp3430_vsim_supplies, -}; - -static struct twl4030_platform_data sdp3430_twldata = { - /* platform_data for children goes here */ - .gpio = &sdp3430_gpio_data, - .keypad = &sdp3430_kp_data, - - .vaux1 = &sdp3430_vaux1, - .vaux2 = &sdp3430_vaux2, - .vaux3 = &sdp3430_vaux3, - .vaux4 = &sdp3430_vaux4, - .vmmc1 = &sdp3430_vmmc1, - .vmmc2 = &sdp3430_vmmc2, - .vsim = &sdp3430_vsim, -}; - -static int __init omap3430_i2c_init(void) -{ - /* i2c1 for PMIC only */ - omap3_pmic_get_config(&sdp3430_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI | - TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - sdp3430_twldata.vdac->constraints.apply_uV = true; - sdp3430_twldata.vpll2->constraints.apply_uV = true; - sdp3430_twldata.vpll2->constraints.name = "VDVI"; - - sdp3430_twldata.audio->codec->hs_extmute = 1; - sdp3430_twldata.audio->codec->hs_extmute_gpio = -EINVAL; - - omap3_pmic_init("twl4030", &sdp3430_twldata); - - /* i2c2 on camera connector (for sensor control) and optional isp1301 */ - omap_register_i2c_bus(2, 400, NULL, 0); - /* i2c3 on display connector (for DVI, tfp410) */ - omap_register_i2c_bus(3, 400, NULL, 0); - return 0; -} - -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) - -static struct omap_smc91x_platform_data board_smc91x_data = { - .cs = 3, - .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 | - IORESOURCE_IRQ_LOWLEVEL, -}; - -static void __init board_smc91x_init(void) -{ - if (omap_rev() > OMAP3430_REV_ES1_0) - board_smc91x_data.gpio_irq = 6; - else - board_smc91x_data.gpio_irq = 29; - - gpmc_smc91x_init(&board_smc91x_data); -} - -#else - -static inline void board_smc91x_init(void) -{ -} - -#endif - -static void enable_board_wakeup_source(void) -{ - /* T2 interrupt line (keypad) */ - omap_mux_init_signal("sys_nirq", - OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); -} - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 1, - .reset_gpio = 57, - .vcc_gpio = -EINVAL, - }, - { - .port = 2, - .reset_gpio = 61, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#else -#define board_mux NULL -#endif - -/* - * SDP3430 V2 Board CS organization - * Different from SDP3430 V1. Now 4 switches used to specify CS - * - * See also the Switch S8 settings in the comments. - */ -static char chip_sel_3430[][GPMC_CS_NUM] = { - {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */ - {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */ - {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */ -}; - -static struct mtd_partition sdp_nor_partitions[] = { - /* bootloader (U-Boot, etc) in first sector */ - { - .name = "Bootloader-NOR", - .offset = 0, - .size = SZ_256K, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - /* bootloader params in the next sector */ - { - .name = "Params-NOR", - .offset = MTDPART_OFS_APPEND, - .size = SZ_256K, - .mask_flags = 0, - }, - /* kernel */ - { - .name = "Kernel-NOR", - .offset = MTDPART_OFS_APPEND, - .size = SZ_2M, - .mask_flags = 0 - }, - /* file system */ - { - .name = "Filesystem-NOR", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0 - } -}; - -static struct mtd_partition sdp_onenand_partitions[] = { - { - .name = "X-Loader-OneNAND", - .offset = 0, - .size = 4 * (64 * 2048), - .mask_flags = MTD_WRITEABLE /* force read-only */ - }, - { - .name = "U-Boot-OneNAND", - .offset = MTDPART_OFS_APPEND, - .size = 2 * (64 * 2048), - .mask_flags = MTD_WRITEABLE /* force read-only */ - }, - { - .name = "U-Boot Environment-OneNAND", - .offset = MTDPART_OFS_APPEND, - .size = 1 * (64 * 2048), - }, - { - .name = "Kernel-OneNAND", - .offset = MTDPART_OFS_APPEND, - .size = 16 * (64 * 2048), - }, - { - .name = "File System-OneNAND", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct mtd_partition sdp_nand_partitions[] = { - /* All the partition sizes are listed in terms of NAND block size */ - { - .name = "X-Loader-NAND", - .offset = 0, - .size = 4 * (64 * 2048), - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot-NAND", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 10 * (64 * 2048), - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "Boot Env-NAND", - - .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */ - .size = 6 * (64 * 2048), - }, - { - .name = "Kernel-NAND", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ - .size = 40 * (64 * 2048), - }, - { - .name = "File System - NAND", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, /* Offset = 0x780000 */ - }, -}; - -static struct flash_partitions sdp_flash_partitions[] = { - { - .parts = sdp_nor_partitions, - .nr_parts = ARRAY_SIZE(sdp_nor_partitions), - }, - { - .parts = sdp_onenand_partitions, - .nr_parts = ARRAY_SIZE(sdp_onenand_partitions), - }, - { - .parts = sdp_nand_partitions, - .nr_parts = ARRAY_SIZE(sdp_nand_partitions), - }, -}; - -static void __init omap_3430sdp_init(void) -{ - int gpio_pendown; - - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_hsmmc_init(mmc); - omap3430_i2c_init(); - omap_display_init(&sdp3430_dss_data); - platform_device_register(&sdp3430_lcd_device); - platform_device_register(&sdp3430_tfp410_device); - platform_device_register(&sdp3430_dvi_connector_device); - platform_device_register(&sdp3430_tv_connector_device); - - if (omap_rev() > OMAP3430_REV_ES1_0) - gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2; - else - gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1; - omap_ads7846_init(1, gpio_pendown, 310, NULL); - omap_serial_init(); - omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL); - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - board_smc91x_init(); - board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); - sdp3430_display_init(); - enable_board_wakeup_source(); - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); -} - -MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") - /* Maintainer: Syed Khasim - Texas Instruments Inc */ - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3430_init_early, - .init_irq = omap3_init_irq, - .init_machine = omap_3430sdp_init, - .init_late = omap3430_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 212c3160de18..8168ddabaeda 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -24,6 +24,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/omap-gpmc.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index c6df8eec4553..91738a14ecbe 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -25,6 +25,7 @@ #include <linux/input/matrix_keypad.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/omap-gpmc.h> #include <linux/platform_data/gpio-omap.h> #include <linux/platform_data/at24.h> @@ -51,8 +52,6 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" -#include "gpmc.h" -#include "gpmc-nand.h" #define CM_T35_GPIO_PENDOWN 57 #define SB_T35_USB_HUB_RESET_GPIO 167 diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 8a2c1677964c..794756df8529 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -28,6 +28,7 @@ #include <linux/delay.h> #include <linux/gpio.h> #include <linux/leds.h> +#include <linux/omap-gpmc.h> #include <linux/rtc-v3020.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -41,7 +42,6 @@ #include "common.h" #include <linux/platform_data/mtd-nand-omap2.h> -#include "gpmc.h" #include "am35xx.h" @@ -50,7 +50,6 @@ #include "hsmmc.h" #include "common-board-devices.h" #include "am35xx-emac.h" -#include "gpmc-nand.h" #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led cm_t3517_leds[] = { diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 2d245c2e641c..70b21cc279ba 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -13,6 +13,7 @@ */ #include <linux/kernel.h> +#include <linux/omap-gpmc.h> #include <linux/platform_device.h> #include <linux/mtd/physmap.h> #include <linux/io.h> @@ -23,8 +24,6 @@ #include "soc.h" #include "common.h" #include "board-flash.h" -#include "gpmc-onenand.h" -#include "gpmc-nand.h" #define REG_FPGA_REV 0x10 #define REG_FPGA_DIP_SWITCH_INPUT2 0x60 diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h index 2fb5d41a9fae..ea9aaebe11e7 100644 --- a/arch/arm/mach-omap2/board-flash.h +++ b/arch/arm/mach-omap2/board-flash.h @@ -12,7 +12,6 @@ */ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include "gpmc.h" #define PDC_NOR 1 #define PDC_NAND 2 diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 97767a27ca9d..b6443a4e0c78 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -21,8 +21,9 @@ #include <linux/i2c.h> #include <linux/spi/spi.h> #include <linux/usb/musb.h> +#include <linux/mmc/host.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/platform_data/mtd-onenand-omap2.h> +#include <linux/platform_data/mmc-omap.h> #include <linux/mfd/menelaus.h> #include <sound/tlv320aic3x.h> @@ -32,7 +33,6 @@ #include "common.h" #include "mmc.h" #include "soc.h" -#include "gpmc-onenand.h" #include "common-board-devices.h" #define TUSB6010_ASYNC_CS 1 diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index f32201656cf3..7f1708738c30 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -24,6 +24,7 @@ #include <linux/spi/spi.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> +#include <linux/omap-gpmc.h> #include <linux/wl12xx.h> #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> @@ -51,7 +52,6 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" -#include "gpmc-nand.h" #define PANDORA_WIFI_IRQ_GPIO 21 #define PANDORA_WIFI_NRESET_GPIO 23 diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ddfc8df83c6a..14edcd7a2a1d 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -23,6 +23,8 @@ #include <linux/regulator/machine.h> #include <linux/gpio.h> #include <linux/gpio_keys.h> +#include <linux/gpio/machine.h> +#include <linux/omap-gpmc.h> #include <linux/mmc/host.h> #include <linux/power/isp1704_charger.h> #include <linux/platform_data/spi-omap2-mcspi.h> @@ -32,13 +34,11 @@ #include "common.h" #include <linux/omap-dma.h> -#include "gpmc-smc91x.h" #include "board-rx51.h" #include <sound/tlv320aic3x.h> #include <sound/tpa6130a2-plat.h> -#include <media/radio-si4713.h> #include <media/si4713.h> #include <linux/platform_data/leds-lp55xx.h> @@ -55,8 +55,6 @@ #include "omap-pm.h" #include "hsmmc.h" #include "common-board-devices.h" -#include "gpmc.h" -#include "gpmc-onenand.h" #include "soc.h" #include "omap-secure.h" @@ -484,7 +482,7 @@ static struct omap_mux_partition *partition; * Current flows to eMMC when eMMC is off and the data lines are pulled up, * so pull them down. N.B. we pull 8 lines because we are using 8 lines. */ -static void rx51_mmc2_remux(struct device *dev, int slot, int power_on) +static void rx51_mmc2_remux(struct device *dev, int power_on) { if (power_on) omap_mux_write_array(partition, rx51_mmc2_on_mux); @@ -500,7 +498,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { .cover_only = true, .gpio_cd = 160, .gpio_wp = -EINVAL, - .power_saving = true, }, { .name = "internal", @@ -510,7 +507,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .nonremovable = true, - .power_saving = true, .remux = rx51_mmc2_remux, }, {} /* Terminator */ @@ -760,46 +756,17 @@ static struct regulator_init_data rx51_vintdig = { }, }; -static const char * const si4713_supply_names[] = { - "vio", - "vdd", -}; - -static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = { - .supplies = ARRAY_SIZE(si4713_supply_names), - .supply_names = si4713_supply_names, - .gpio_reset = RX51_FMTX_RESET_GPIO, -}; - -static struct i2c_board_info rx51_si4713_board_info __initdata_or_module = { - I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH), - .platform_data = &rx51_si4713_i2c_data, -}; - -static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = { - .i2c_bus = 2, - .subdev_board_info = &rx51_si4713_board_info, -}; - -static struct platform_device rx51_si4713_dev __initdata_or_module = { - .name = "radio-si4713", - .id = -1, - .dev = { - .platform_data = &rx51_si4713_data, +static struct gpiod_lookup_table rx51_fmtx_gpios_table = { + .dev_id = "2-0063", + .table = { + GPIO_LOOKUP("gpio.6", 3, "reset", GPIO_ACTIVE_HIGH), /* 163 */ + { }, }, }; -static __init void rx51_init_si4713(void) +static __init void rx51_gpio_init(void) { - int err; - - err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq"); - if (err) { - printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err); - return; - } - rx51_si4713_board_info.irq = gpio_to_irq(RX51_FMTX_IRQ); - platform_device_register(&rx51_si4713_dev); + gpiod_add_lookup_table(&rx51_fmtx_gpios_table); } static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) @@ -1029,7 +996,19 @@ static struct aic3x_pdata rx51_aic3x_data2 = { .gpio_reset = 60, }; +#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713) +static struct si4713_platform_data rx51_si4713_platform_data = { + .is_platform_device = true +}; +#endif + static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { +#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713) + { + I2C_BOARD_INFO("si4713", 0x63), + .platform_data = &rx51_si4713_platform_data, + }, +#endif { I2C_BOARD_INFO("tlv320aic3x", 0x18), .platform_data = &rx51_aic3x_data, @@ -1070,6 +1049,10 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { static int __init rx51_i2c_init(void) { +#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713) + int err; +#endif + if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || system_rev >= SYSTEM_REV_B_USES_VAUX3) { rx51_twldata.vaux3 = &rx51_vaux3_mmc; @@ -1087,6 +1070,14 @@ static int __init rx51_i2c_init(void) rx51_twldata.vdac->constraints.name = "VDAC"; omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata); +#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713) + err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq"); + if (err) { + printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err); + return err; + } + rx51_peripherals_i2c_board_info_2[0].irq = gpio_to_irq(RX51_FMTX_IRQ); +#endif omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); #if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) @@ -1146,33 +1137,6 @@ static struct omap_onenand_platform_data board_onenand_data[] = { }; #endif -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) - -static struct omap_smc91x_platform_data board_smc91x_data = { - .cs = 1, - .gpio_irq = 54, - .gpio_pwrdwn = 86, - .gpio_reset = 164, - .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL, -}; - -static void __init board_smc91x_init(void) -{ - omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_gpio(86, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(164, OMAP_PIN_OUTPUT); - - gpmc_smc91x_init(&board_smc91x_data); -} - -#else - -static inline void board_smc91x_init(void) -{ -} - -#endif - static struct gpio rx51_wl1251_gpios[] __initdata = { { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, }; @@ -1300,14 +1264,13 @@ static void __init rx51_init_omap3_rom_rng(void) void __init rx51_peripherals_init(void) { + rx51_gpio_init(); rx51_i2c_init(); regulator_has_full_constraints(); gpmc_onenand_init(board_onenand_data); - board_smc91x_init(); rx51_add_gpio_keys(); rx51_init_wl1251(); rx51_init_tsc2005(); - rx51_init_si4713(); rx51_init_lirc(); spi_register_board_info(rx51_peripherals_spi_board_info, ARRAY_SIZE(rx51_peripherals_spi_board_info)); diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c deleted file mode 100644 index 6273c286e1d8..000000000000 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Code for TI8168/TI8148 EVM. - * - * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/usb/musb.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" - -static struct omap_musb_board_data musb_board_data = { - .set_phy_power = ti81xx_musb_phy_power, - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 500, -}; - -static void __init ti81xx_evm_init(void) -{ - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - usb_musb_init(&musb_board_data); -} - -MACHINE_START(TI8168EVM, "ti8168evm") - /* Maintainer: Texas Instruments */ - .atag_offset = 0x100, - .map_io = ti81xx_map_io, - .init_early = ti81xx_init_early, - .init_irq = ti81xx_init_irq, - .init_time = omap3_sync32k_timer_init, - .init_machine = ti81xx_evm_init, - .init_late = ti81xx_init_late, - .restart = omap44xx_restart, -MACHINE_END - -MACHINE_START(TI8148EVM, "ti8148evm") - /* Maintainer: Texas Instruments */ - .atag_offset = 0x100, - .map_io = ti81xx_map_io, - .init_early = ti81xx_init_early, - .init_irq = ti81xx_init_irq, - .init_time = omap3_sync32k_timer_init, - .init_machine = ti81xx_evm_init, - .init_late = ti81xx_init_late, - .restart = omap44xx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index eb8c75ec3b1a..5c5ebb4db5f7 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -257,6 +257,9 @@ static const struct clk_ops dpll1_ck_ops = { .get_parent = &omap2_init_dpll_parent, .recalc_rate = &omap3_dpll_recalc, .set_rate = &omap3_noncore_dpll_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, + .determine_rate = &omap3_noncore_dpll_determine_rate, .round_rate = &omap2_dpll_round_rate, }; @@ -367,6 +370,9 @@ static const struct clk_ops dpll4_ck_ops = { .get_parent = &omap2_init_dpll_parent, .recalc_rate = &omap3_dpll_recalc, .set_rate = &omap3_dpll4_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_dpll4_set_rate_and_parent, + .determine_rate = &omap3_noncore_dpll_determine_rate, .round_rate = &omap2_dpll_round_rate, }; diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 500530d1364a..6ad5b4dbd33e 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -171,7 +171,8 @@ static void _omap2_module_wait_ready(struct clk_hw_omap *clk) _wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit), idlest_val, __clk_get_name(clk->hw.clk)); } else { - cm_wait_module_ready(prcm_mod, idlest_reg_id, idlest_bit); + omap_cm_wait_module_ready(0, prcm_mod, idlest_reg_id, + idlest_bit); }; } @@ -771,4 +772,8 @@ void __init ti_clk_init_features(void) ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL; else if (cpu_is_omap34xx()) ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL; + + /* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */ + if (omap_rev() == OMAP3430_REV_ES1_0) + ti_clk_features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM; } diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 4592a2762592..641337c6cde9 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -234,6 +234,7 @@ struct ti_clk_features { }; #define TI_CLK_DPLL_HAS_FREQSEL (1 << 0) +#define TI_CLK_DPLL4_DENY_REPROGRAM (1 << 1) extern struct ti_clk_features ti_clk_features; diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c index 0b02b4161d71..a9e86db5daf9 100644 --- a/arch/arm/mach-omap2/clock3xxx.c +++ b/arch/arm/mach-omap2/clock3xxx.c @@ -38,6 +38,18 @@ /* needed by omap3_core_dpll_m2_set_rate() */ struct clk *sdrc_ick_p, *arm_fck_p; + +/** + * omap3_dpll4_set_rate - set rate for omap3 per-dpll + * @hw: clock to change + * @rate: target rate for clock + * @parent_rate: rate of the parent clock + * + * Check if the current SoC supports the per-dpll reprogram operation + * or not, and then do the rate change if supported. Returns -EINVAL + * if not supported, 0 for success, and potential error codes from the + * clock rate change. + */ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { @@ -46,7 +58,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate, * on 3430ES1 prevents us from changing DPLL multipliers or dividers * on DPLL4. */ - if (omap_rev() == OMAP3430_REV_ES1_0) { + if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) { pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n"); return -EINVAL; } @@ -54,6 +66,30 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate, return omap3_noncore_dpll_set_rate(hw, rate, parent_rate); } +/** + * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll + * @hw: clock to change + * @rate: target rate for clock + * @parent_rate: rate of the parent clock + * @index: parent index, 0 - reference clock, 1 - bypass clock + * + * Check if the current SoC support the per-dpll reprogram operation + * or not, and then do the rate + parent change if supported. Returns + * -EINVAL if not supported, 0 for success, and potential error codes + * from the clock rate change. + */ +int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate, u8 index) +{ + if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) { + pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n"); + return -EINVAL; + } + + return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate, + index); +} + void __init omap3_clk_lock_dpll5(void) { struct clk *dpll5_clk; diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index 93473f9a551c..6222e87a79b6 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -45,17 +45,29 @@ extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2); * struct cm_ll_data - fn ptrs to per-SoC CM function implementations * @split_idlest_reg: ptr to the SoC CM-specific split_idlest_reg impl * @wait_module_ready: ptr to the SoC CM-specific wait_module_ready impl + * @wait_module_idle: ptr to the SoC CM-specific wait_module_idle impl + * @module_enable: ptr to the SoC CM-specific module_enable impl + * @module_disable: ptr to the SoC CM-specific module_disable impl */ struct cm_ll_data { int (*split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst, u8 *idlest_reg_id); - int (*wait_module_ready)(s16 prcm_mod, u8 idlest_id, u8 idlest_shift); + int (*wait_module_ready)(u8 part, s16 prcm_mod, u16 idlest_reg, + u8 idlest_shift); + int (*wait_module_idle)(u8 part, s16 prcm_mod, u16 idlest_reg, + u8 idlest_shift); + void (*module_enable)(u8 mode, u8 part, u16 inst, u16 clkctrl_offs); + void (*module_disable)(u8 part, u16 inst, u16 clkctrl_offs); }; extern int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, u8 *idlest_reg_id); -extern int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift); - +int omap_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_reg, + u8 idlest_shift); +int omap_cm_wait_module_idle(u8 part, s16 prcm_mod, u16 idlest_reg, + u8 idlest_shift); +int omap_cm_module_enable(u8 mode, u8 part, u16 inst, u16 clkctrl_offs); +int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs); extern int cm_register(struct cm_ll_data *cld); extern int cm_unregister(struct cm_ll_data *cld); diff --git a/arch/arm/mach-omap2/cm1_44xx.h b/arch/arm/mach-omap2/cm1_44xx.h index 5ae8fe39d6ee..a5949927b661 100644 --- a/arch/arm/mach-omap2/cm1_44xx.h +++ b/arch/arm/mach-omap2/cm1_44xx.h @@ -25,8 +25,6 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CM1_44XX_H #define __ARCH_ARM_MACH_OMAP2_CM1_44XX_H -#include "cm_44xx_54xx.h" - /* CM1 base address */ #define OMAP4430_CM1_BASE 0x4a004000 diff --git a/arch/arm/mach-omap2/cm1_54xx.h b/arch/arm/mach-omap2/cm1_54xx.h index 90b3348e6672..fd245dfa7391 100644 --- a/arch/arm/mach-omap2/cm1_54xx.h +++ b/arch/arm/mach-omap2/cm1_54xx.h @@ -22,8 +22,6 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CM1_54XX_H #define __ARCH_ARM_MACH_OMAP2_CM1_54XX_H -#include "cm_44xx_54xx.h" - /* CM1 base address */ #define OMAP54XX_CM_CORE_AON_BASE 0x4a004000 diff --git a/arch/arm/mach-omap2/cm1_7xx.h b/arch/arm/mach-omap2/cm1_7xx.h index ca6fa1febaac..2f1c09eea021 100644 --- a/arch/arm/mach-omap2/cm1_7xx.h +++ b/arch/arm/mach-omap2/cm1_7xx.h @@ -23,8 +23,6 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CM1_7XX_H #define __ARCH_ARM_MACH_OMAP2_CM1_7XX_H -#include "cm_44xx_54xx.h" - /* CM1 base address */ #define DRA7XX_CM_CORE_AON_BASE 0x4a005000 diff --git a/arch/arm/mach-omap2/cm2_44xx.h b/arch/arm/mach-omap2/cm2_44xx.h index ee5136d7cdda..7521abf3d830 100644 --- a/arch/arm/mach-omap2/cm2_44xx.h +++ b/arch/arm/mach-omap2/cm2_44xx.h @@ -25,8 +25,6 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CM2_44XX_H #define __ARCH_ARM_MACH_OMAP2_CM2_44XX_H -#include "cm_44xx_54xx.h" - /* CM2 base address */ #define OMAP4430_CM2_BASE 0x4a008000 diff --git a/arch/arm/mach-omap2/cm2_54xx.h b/arch/arm/mach-omap2/cm2_54xx.h index 2683231b299b..ff4040c196d8 100644 --- a/arch/arm/mach-omap2/cm2_54xx.h +++ b/arch/arm/mach-omap2/cm2_54xx.h @@ -21,8 +21,6 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CM2_54XX_H #define __ARCH_ARM_MACH_OMAP2_CM2_54XX_H -#include "cm_44xx_54xx.h" - /* CM2 base address */ #define OMAP54XX_CM_CORE_BASE 0x4a008000 diff --git a/arch/arm/mach-omap2/cm2_7xx.h b/arch/arm/mach-omap2/cm2_7xx.h index e966e3a3c931..ce63fdb68056 100644 --- a/arch/arm/mach-omap2/cm2_7xx.h +++ b/arch/arm/mach-omap2/cm2_7xx.h @@ -22,8 +22,6 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CM2_7XX_H #define __ARCH_ARM_MACH_OMAP2_CM2_7XX_H -#include "cm_44xx_54xx.h" - /* CM2 base address */ #define DRA7XX_CM_CORE_BASE 0x4a008000 diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c index 8be6ea50c092..a96d901b1d5d 100644 --- a/arch/arm/mach-omap2/cm2xxx.c +++ b/arch/arm/mach-omap2/cm2xxx.c @@ -53,7 +53,7 @@ static void _write_clktrctrl(u8 c, s16 module, u32 mask) omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL); } -bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask) +static bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask) { u32 v; @@ -64,12 +64,12 @@ bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask) return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0; } -void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask) +static void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask) { _write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask); } -void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask) +static void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask) { _write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask); } @@ -150,7 +150,7 @@ static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit) v |= m; omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN); - omap2xxx_cm_wait_module_ready(PLL_MOD, 1, status_bit); + omap2xxx_cm_wait_module_ready(0, PLL_MOD, 1, status_bit); /* * REVISIT: Should we return an error code if @@ -204,8 +204,9 @@ void omap2xxx_cm_apll96_disable(void) * XXX This function is only needed until absolute register addresses are * removed from the OMAP struct clk records. */ -int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, - u8 *idlest_reg_id) +static int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, + s16 *prcm_inst, + u8 *idlest_reg_id) { unsigned long offs; u8 idlest_offs; @@ -238,6 +239,7 @@ int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, /** * omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby + * @part: PRCM partition, ignored for OMAP2 * @prcm_mod: PRCM module offset * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3) * @idlest_shift: shift of the bit in the CM_IDLEST* register to check @@ -246,7 +248,8 @@ int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon * success or -EBUSY if the module doesn't enable in time. */ -int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) +int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id, + u8 idlest_shift) { int ena = 0, i = 0; u8 cm_idlest_reg; diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h index 891d81c3c8f4..c89502b168ae 100644 --- a/arch/arm/mach-omap2/cm2xxx.h +++ b/arch/arm/mach-omap2/cm2xxx.h @@ -46,9 +46,6 @@ #ifndef __ASSEMBLER__ -extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask); -extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask); - extern void omap2xxx_cm_set_dpll_disable_autoidle(void); extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void); @@ -57,11 +54,8 @@ extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void); extern void omap2xxx_cm_set_apll96_disable_autoidle(void); extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void); -extern bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask); -extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, - u8 idlest_shift); -extern int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, - s16 *prcm_inst, u8 *idlest_reg_id); +int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id, + u8 idlest_shift); extern int omap2xxx_cm_fclks_active(void); extern int omap2xxx_cm_mpu_retention_allowed(void); extern u32 omap2xxx_cm_get_core_clk_src(void); diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index b3f99e93def0..b9ad463a368a 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -96,13 +96,12 @@ static inline u32 am33xx_cm_read_reg_bits(u16 inst, s16 idx, u32 mask) /** * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield * @inst: CM instance register offset (*_INST macro) - * @cdoffs: Clockdomain register offset (*_CDOFFS macro) * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) * * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to * bit 0. */ -static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs) +static u32 _clkctrl_idlest(u16 inst, u16 clkctrl_offs) { u32 v = am33xx_cm_read_reg(inst, clkctrl_offs); v &= AM33XX_IDLEST_MASK; @@ -113,17 +112,16 @@ static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs) /** * _is_module_ready - can module registers be accessed without causing an abort? * @inst: CM instance register offset (*_INST macro) - * @cdoffs: Clockdomain register offset (*_CDOFFS macro) * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) * * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise. */ -static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs) +static bool _is_module_ready(u16 inst, u16 clkctrl_offs) { u32 v; - v = _clkctrl_idlest(inst, cdoffs, clkctrl_offs); + v = _clkctrl_idlest(inst, clkctrl_offs); return (v == CLKCTRL_IDLEST_FUNCTIONAL || v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false; @@ -158,7 +156,7 @@ static void _clktrctrl_write(u8 c, u16 inst, u16 cdoffs) * Returns true if the clockdomain referred to by (@inst, @cdoffs) * is in hardware-supervised idle mode, or 0 otherwise. */ -bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs) +static bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs) { u32 v; @@ -177,7 +175,7 @@ bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs) * Put a clockdomain referred to by (@inst, @cdoffs) into * hardware-supervised idle mode. No return value. */ -void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs) +static void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs) { _clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs); } @@ -191,7 +189,7 @@ void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs) * software-supervised idle mode, i.e., controlled manually by the * Linux OMAP clockdomain code. No return value. */ -void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs) +static void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs) { _clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs); } @@ -204,7 +202,7 @@ void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs) * Put a clockdomain referred to by (@inst, @cdoffs) into idle * No return value. */ -void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs) +static void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs) { _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs); } @@ -217,7 +215,7 @@ void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs) * Take a clockdomain referred to by (@inst, @cdoffs) out of idle, * waking it up. No return value. */ -void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs) +static void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs) { _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs); } @@ -228,20 +226,22 @@ void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs) /** * am33xx_cm_wait_module_ready - wait for a module to be in 'func' state + * @part: PRCM partition, ignored for AM33xx * @inst: CM instance register offset (*_INST macro) - * @cdoffs: Clockdomain register offset (*_CDOFFS macro) * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * @bit_shift: bit shift for the register, ignored for AM33xx * * Wait for the module IDLEST to be functional. If the idle state is in any * the non functional state (trans, idle or disabled), module and thus the * sysconfig cannot be accessed and will probably lead to an "imprecise * external abort" */ -int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs) +static int am33xx_cm_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs, + u8 bit_shift) { int i = 0; - omap_test_timeout(_is_module_ready(inst, cdoffs, clkctrl_offs), + omap_test_timeout(_is_module_ready(inst, clkctrl_offs), MAX_MODULE_READY_TIME, i); return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; @@ -250,22 +250,24 @@ int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs) /** * am33xx_cm_wait_module_idle - wait for a module to be in 'disabled' * state + * @part: CM partition, ignored for AM33xx * @inst: CM instance register offset (*_INST macro) - * @cdoffs: Clockdomain register offset (*_CDOFFS macro) * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * @bit_shift: bit shift for the register, ignored for AM33xx * * Wait for the module IDLEST to be disabled. Some PRCM transition, * like reset assertion or parent clock de-activation must wait the * module to be fully disabled. */ -int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs) +static int am33xx_cm_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs, + u8 bit_shift) { int i = 0; if (!clkctrl_offs) return 0; - omap_test_timeout((_clkctrl_idlest(inst, cdoffs, clkctrl_offs) == + omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) == CLKCTRL_IDLEST_DISABLED), MAX_MODULE_READY_TIME, i); @@ -275,13 +277,14 @@ int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs) /** * am33xx_cm_module_enable - Enable the modulemode inside CLKCTRL * @mode: Module mode (SW or HW) + * @part: CM partition, ignored for AM33xx * @inst: CM instance register offset (*_INST macro) - * @cdoffs: Clockdomain register offset (*_CDOFFS macro) * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) * * No return value. */ -void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, u16 clkctrl_offs) +static void am33xx_cm_module_enable(u8 mode, u8 part, u16 inst, + u16 clkctrl_offs) { u32 v; @@ -293,13 +296,13 @@ void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, u16 clkctrl_offs) /** * am33xx_cm_module_disable - Disable the module inside CLKCTRL + * @part: CM partition, ignored for AM33xx * @inst: CM instance register offset (*_INST macro) - * @cdoffs: Clockdomain register offset (*_CDOFFS macro) * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) * * No return value. */ -void am33xx_cm_module_disable(u16 inst, s16 cdoffs, u16 clkctrl_offs) +static void am33xx_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs) { u32 v; @@ -362,3 +365,21 @@ struct clkdm_ops am33xx_clkdm_operations = { .clkdm_clk_enable = am33xx_clkdm_clk_enable, .clkdm_clk_disable = am33xx_clkdm_clk_disable, }; + +static struct cm_ll_data am33xx_cm_ll_data = { + .wait_module_ready = &am33xx_cm_wait_module_ready, + .wait_module_idle = &am33xx_cm_wait_module_idle, + .module_enable = &am33xx_cm_module_enable, + .module_disable = &am33xx_cm_module_disable, +}; + +int __init am33xx_cm_init(void) +{ + return cm_register(&am33xx_cm_ll_data); +} + +static void __exit am33xx_cm_exit(void) +{ + cm_unregister(&am33xx_cm_ll_data); +} +__exitcall(am33xx_cm_exit); diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h index bd2441790779..046b4b2bc9d9 100644 --- a/arch/arm/mach-omap2/cm33xx.h +++ b/arch/arm/mach-omap2/cm33xx.h @@ -374,41 +374,6 @@ #ifndef __ASSEMBLER__ -bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs); -void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs); -void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs); -void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs); -void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs); - -#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) -extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, - u16 clkctrl_offs); -extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, - u16 clkctrl_offs); -extern void am33xx_cm_module_disable(u16 inst, s16 cdoffs, - u16 clkctrl_offs); -extern int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, - u16 clkctrl_offs); -#else -static inline int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, - u16 clkctrl_offs) -{ - return 0; -} -static inline void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, - u16 clkctrl_offs) -{ -} -static inline void am33xx_cm_module_disable(u16 inst, s16 cdoffs, - u16 clkctrl_offs) -{ -} -static inline int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, - u16 clkctrl_offs) -{ - return 0; -} -#endif - +int am33xx_cm_init(void); #endif /* ASSEMBLER */ #endif diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c index 129a4e7f6ef5..ebead8f035f9 100644 --- a/arch/arm/mach-omap2/cm3xxx.c +++ b/arch/arm/mach-omap2/cm3xxx.c @@ -42,7 +42,7 @@ static void _write_clktrctrl(u8 c, s16 module, u32 mask) omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL); } -bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask) +static bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask) { u32 v; @@ -53,22 +53,22 @@ bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask) return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0; } -void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask) +static void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask) { _write_clktrctrl(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, module, mask); } -void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask) +static void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask) { _write_clktrctrl(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, module, mask); } -void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask) +static void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask) { _write_clktrctrl(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, module, mask); } -void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask) +static void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask) { _write_clktrctrl(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, module, mask); } @@ -79,6 +79,7 @@ void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask) /** * omap3xxx_cm_wait_module_ready - wait for a module to leave idle or standby + * @part: PRCM partition, ignored for OMAP3 * @prcm_mod: PRCM module offset * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3) * @idlest_shift: shift of the bit in the CM_IDLEST* register to check @@ -87,7 +88,8 @@ void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask) * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon * success or -EBUSY if the module doesn't enable in time. */ -int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) +static int omap3xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id, + u8 idlest_shift) { int ena = 0, i = 0; u8 cm_idlest_reg; @@ -116,8 +118,9 @@ int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) * XXX This function is only needed until absolute register addresses are * removed from the OMAP struct clk records. */ -int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, - u8 *idlest_reg_id) +static int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, + s16 *prcm_inst, + u8 *idlest_reg_id) { unsigned long offs; u8 idlest_offs; diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h index 7a16b5598127..734a8581c0c4 100644 --- a/arch/arm/mach-omap2/cm3xxx.h +++ b/arch/arm/mach-omap2/cm3xxx.h @@ -68,18 +68,6 @@ #ifndef __ASSEMBLER__ -extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask); -extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask); -extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask); -extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask); - -extern bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask); -extern int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, - u8 idlest_shift); - -extern int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, - s16 *prcm_inst, u8 *idlest_reg_id); - extern void omap3_cm_save_context(void); extern void omap3_cm_restore_context(void); extern void omap3_cm_save_scratchpad_contents(u32 *ptr); diff --git a/arch/arm/mach-omap2/cm44xx.c b/arch/arm/mach-omap2/cm44xx.c deleted file mode 100644 index fe5cc7bae489..000000000000 --- a/arch/arm/mach-omap2/cm44xx.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * OMAP4 CM1, CM2 module low-level functions - * - * Copyright (C) 2010 Nokia Corporation - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * These functions are intended to be used only by the cminst44xx.c file. - * XXX Perhaps we should just move them there and make them static. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/io.h> - -#include "cm.h" -#include "cm1_44xx.h" -#include "cm2_44xx.h" - -/* CM1 hardware module low-level functions */ - -/* Read a register in CM1 */ -u32 omap4_cm1_read_inst_reg(s16 inst, u16 reg) -{ - return readl_relaxed(cm_base + inst + reg); -} - -/* Write into a register in CM1 */ -void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 reg) -{ - writel_relaxed(val, cm_base + inst + reg); -} - -/* Read a register in CM2 */ -u32 omap4_cm2_read_inst_reg(s16 inst, u16 reg) -{ - return readl_relaxed(cm2_base + inst + reg); -} - -/* Write into a register in CM2 */ -void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 reg) -{ - writel_relaxed(val, cm2_base + inst + reg); -} diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h index 3380beeace6e..728d06a4af19 100644 --- a/arch/arm/mach-omap2/cm44xx.h +++ b/arch/arm/mach-omap2/cm44xx.h @@ -23,4 +23,7 @@ #define OMAP4_CM_CLKSTCTRL 0x0000 #define OMAP4_CM_STATICDEP 0x0004 +void omap_cm_base_init(void); +int omap4_cm_init(void); + #endif diff --git a/arch/arm/mach-omap2/cm_44xx_54xx.h b/arch/arm/mach-omap2/cm_44xx_54xx.h deleted file mode 100644 index cbb211690321..000000000000 --- a/arch/arm/mach-omap2/cm_44xx_54xx.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * OMAP44xx and OMAP54xx CM1/CM2 function prototypes - * - * Copyright (C) 2009-2013 Texas Instruments, Inc. - * Copyright (C) 2009-2010 Nokia Corporation - * - * Paul Walmsley (paul@pwsan.com) - * Rajendra Nayak (rnayak@ti.com) - * Benoit Cousson (b-cousson@ti.com) - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_CM_44XX_54XX_H -#define __ARCH_ARM_MACH_OMAP2_CM_44XX_55XX_H - -/* CM1 Function prototypes */ -extern u32 omap4_cm1_read_inst_reg(s16 inst, u16 idx); -extern void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 idx); -extern u32 omap4_cm1_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); - -/* CM2 Function prototypes */ -extern u32 omap4_cm2_read_inst_reg(s16 inst, u16 idx); -extern void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 idx); -extern u32 omap4_cm2_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); - -#endif diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c index 8f6c4710877e..8fe02fcedc48 100644 --- a/arch/arm/mach-omap2/cm_common.c +++ b/arch/arm/mach-omap2/cm_common.c @@ -72,9 +72,10 @@ int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, } /** - * cm_wait_module_ready - wait for a module to leave idle or standby + * omap_cm_wait_module_ready - wait for a module to leave idle or standby + * @part: PRCM partition * @prcm_mod: PRCM module offset - * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3) + * @idlest_reg: CM_IDLESTx register * @idlest_shift: shift of the bit in the CM_IDLEST* register to check * * Wait for the PRCM to indicate that the module identified by @@ -83,7 +84,8 @@ int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst, * no per-SoC wait_module_ready() function pointer has been registered * or if the idlest register is unknown on the SoC. */ -int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) +int omap_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_reg, + u8 idlest_shift) { if (!cm_ll_data->wait_module_ready) { WARN_ONCE(1, "cm: %s: no low-level function defined\n", @@ -91,7 +93,79 @@ int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) return -EINVAL; } - return cm_ll_data->wait_module_ready(prcm_mod, idlest_id, idlest_shift); + return cm_ll_data->wait_module_ready(part, prcm_mod, idlest_reg, + idlest_shift); +} + +/** + * omap_cm_wait_module_idle - wait for a module to enter idle or standby + * @part: PRCM partition + * @prcm_mod: PRCM module offset + * @idlest_reg: CM_IDLESTx register + * @idlest_shift: shift of the bit in the CM_IDLEST* register to check + * + * Wait for the PRCM to indicate that the module identified by + * (@prcm_mod, @idlest_id, @idlest_shift) is no longer clocked. Return + * 0 upon success, -EBUSY if the module doesn't enable in time, or + * -EINVAL if no per-SoC wait_module_idle() function pointer has been + * registered or if the idlest register is unknown on the SoC. + */ +int omap_cm_wait_module_idle(u8 part, s16 prcm_mod, u16 idlest_reg, + u8 idlest_shift) +{ + if (!cm_ll_data->wait_module_idle) { + WARN_ONCE(1, "cm: %s: no low-level function defined\n", + __func__); + return -EINVAL; + } + + return cm_ll_data->wait_module_idle(part, prcm_mod, idlest_reg, + idlest_shift); +} + +/** + * omap_cm_module_enable - enable a module + * @mode: target mode for the module + * @part: PRCM partition + * @inst: PRCM instance + * @clkctrl_offs: CM_CLKCTRL register offset for the module + * + * Enables clocks for a module identified by (@part, @inst, @clkctrl_offs) + * making its IO space accessible. Return 0 upon success, -EINVAL if no + * per-SoC module_enable() function pointer has been registered. + */ +int omap_cm_module_enable(u8 mode, u8 part, u16 inst, u16 clkctrl_offs) +{ + if (!cm_ll_data->module_enable) { + WARN_ONCE(1, "cm: %s: no low-level function defined\n", + __func__); + return -EINVAL; + } + + cm_ll_data->module_enable(mode, part, inst, clkctrl_offs); + return 0; +} + +/** + * omap_cm_module_disable - disable a module + * @part: PRCM partition + * @inst: PRCM instance + * @clkctrl_offs: CM_CLKCTRL register offset for the module + * + * Disables clocks for a module identified by (@part, @inst, @clkctrl_offs) + * makings its IO space inaccessible. Return 0 upon success, -EINVAL if + * no per-SoC module_disable() function pointer has been registered. + */ +int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs) +{ + if (!cm_ll_data->module_disable) { + WARN_ONCE(1, "cm: %s: no low-level function defined\n", + __func__); + return -EINVAL; + } + + cm_ll_data->module_disable(part, inst, clkctrl_offs); + return 0; } /** diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 12aca56942c0..95a8cff66aff 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -26,7 +26,6 @@ #include "cm1_44xx.h" #include "cm2_44xx.h" #include "cm44xx.h" -#include "cminst44xx.h" #include "cm-regbits-34xx.h" #include "prcm44xx.h" #include "prm44xx.h" @@ -74,17 +73,18 @@ void omap_cm_base_init(void) /* Private functions */ +static u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx); + /** * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield * @part: PRCM partition ID that the CM_CLKCTRL register exists in * @inst: CM instance register offset (*_INST macro) - * @cdoffs: Clockdomain register offset (*_CDOFFS macro) * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) * * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to * bit 0. */ -static u32 _clkctrl_idlest(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs) +static u32 _clkctrl_idlest(u8 part, u16 inst, u16 clkctrl_offs) { u32 v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs); v &= OMAP4430_IDLEST_MASK; @@ -96,26 +96,23 @@ static u32 _clkctrl_idlest(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs) * _is_module_ready - can module registers be accessed without causing an abort? * @part: PRCM partition ID that the CM_CLKCTRL register exists in * @inst: CM instance register offset (*_INST macro) - * @cdoffs: Clockdomain register offset (*_CDOFFS macro) * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) * * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise. */ -static bool _is_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs) +static bool _is_module_ready(u8 part, u16 inst, u16 clkctrl_offs) { u32 v; - v = _clkctrl_idlest(part, inst, cdoffs, clkctrl_offs); + v = _clkctrl_idlest(part, inst, clkctrl_offs); return (v == CLKCTRL_IDLEST_FUNCTIONAL || v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false; } -/* Public functions */ - /* Read a register in a CM instance */ -u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx) +static u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx) { BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || @@ -124,7 +121,7 @@ u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx) } /* Write into a register in a CM instance */ -void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx) +static void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx) { BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || @@ -133,8 +130,8 @@ void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx) } /* Read-modify-write a register in CM1. Caller must lock */ -u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, u16 inst, - s16 idx) +static u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, u16 inst, + s16 idx) { u32 v; @@ -146,17 +143,18 @@ u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, u16 inst, return v; } -u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx) +static u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx) { return omap4_cminst_rmw_inst_reg_bits(bits, bits, part, inst, idx); } -u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx) +static u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst, + s16 idx) { return omap4_cminst_rmw_inst_reg_bits(bits, 0x0, part, inst, idx); } -u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask) +static u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask) { u32 v; @@ -200,7 +198,7 @@ static void _clktrctrl_write(u8 c, u8 part, u16 inst, u16 cdoffs) * Returns true if the clockdomain referred to by (@part, @inst, @cdoffs) * is in hardware-supervised idle mode, or 0 otherwise. */ -bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs) +static bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs) { u32 v; @@ -220,7 +218,7 @@ bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs) * Put a clockdomain referred to by (@part, @inst, @cdoffs) into * hardware-supervised idle mode. No return value. */ -void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs) +static void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs) { _clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, part, inst, cdoffs); } @@ -235,7 +233,7 @@ void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs) * software-supervised idle mode, i.e., controlled manually by the * Linux OMAP clockdomain code. No return value. */ -void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs) +static void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs) { _clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, part, inst, cdoffs); } @@ -249,7 +247,7 @@ void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs) * Take a clockdomain referred to by (@part, @inst, @cdoffs) out of idle, * waking it up. No return value. */ -void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs) +static void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs) { _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, part, inst, cdoffs); } @@ -258,7 +256,7 @@ void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs) * */ -void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs) +static void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs) { _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs); } @@ -267,23 +265,23 @@ void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs) * omap4_cminst_wait_module_ready - wait for a module to be in 'func' state * @part: PRCM partition ID that the CM_CLKCTRL register exists in * @inst: CM instance register offset (*_INST macro) - * @cdoffs: Clockdomain register offset (*_CDOFFS macro) * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * @bit_shift: bit shift for the register, ignored for OMAP4+ * * Wait for the module IDLEST to be functional. If the idle state is in any * the non functional state (trans, idle or disabled), module and thus the * sysconfig cannot be accessed and will probably lead to an "imprecise * external abort" */ -int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs) +static int omap4_cminst_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs, + u8 bit_shift) { int i = 0; if (!clkctrl_offs) return 0; - omap_test_timeout(_is_module_ready(part, inst, cdoffs, clkctrl_offs), + omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs), MAX_MODULE_READY_TIME, i); return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; @@ -294,21 +292,22 @@ int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, * state * @part: PRCM partition ID that the CM_CLKCTRL register exists in * @inst: CM instance register offset (*_INST macro) - * @cdoffs: Clockdomain register offset (*_CDOFFS macro) * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * @bit_shift: Bit shift for the register, ignored for OMAP4+ * * Wait for the module IDLEST to be disabled. Some PRCM transition, * like reset assertion or parent clock de-activation must wait the * module to be fully disabled. */ -int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs) +static int omap4_cminst_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs, + u8 bit_shift) { int i = 0; if (!clkctrl_offs) return 0; - omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) == + omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) == CLKCTRL_IDLEST_DISABLED), MAX_MODULE_DISABLE_TIME, i); @@ -320,13 +319,12 @@ int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_off * @mode: Module mode (SW or HW) * @part: PRCM partition ID that the CM_CLKCTRL register exists in * @inst: CM instance register offset (*_INST macro) - * @cdoffs: Clockdomain register offset (*_CDOFFS macro) * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) * * No return value. */ -void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs) +static void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, + u16 clkctrl_offs) { u32 v; @@ -340,13 +338,11 @@ void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs, * omap4_cminst_module_disable - Disable the module inside CLKCTRL * @part: PRCM partition ID that the CM_CLKCTRL register exists in * @inst: CM instance register offset (*_INST macro) - * @cdoffs: Clockdomain register offset (*_CDOFFS macro) * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) * * No return value. */ -void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs) +static void omap4_cminst_module_disable(u8 part, u16 inst, u16 clkctrl_offs) { u32 v; @@ -510,3 +506,21 @@ struct clkdm_ops am43xx_clkdm_operations = { .clkdm_clk_enable = omap4_clkdm_clk_enable, .clkdm_clk_disable = omap4_clkdm_clk_disable, }; + +static struct cm_ll_data omap4xxx_cm_ll_data = { + .wait_module_ready = &omap4_cminst_wait_module_ready, + .wait_module_idle = &omap4_cminst_wait_module_idle, + .module_enable = &omap4_cminst_module_enable, + .module_disable = &omap4_cminst_module_disable, +}; + +int __init omap4_cm_init(void) +{ + return cm_register(&omap4xxx_cm_ll_data); +} + +static void __exit omap4_cm_exit(void) +{ + cm_unregister(&omap4xxx_cm_ll_data); +} +__exitcall(omap4_cm_exit); diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h deleted file mode 100644 index 7f56ea444bc4..000000000000 --- a/arch/arm/mach-omap2/cminst44xx.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * OMAP4 Clock Management (CM) function prototypes - * - * Copyright (C) 2010 Nokia Corporation - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ARCH_ASM_MACH_OMAP2_CMINST44XX_H -#define __ARCH_ASM_MACH_OMAP2_CMINST44XX_H - -bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs); -void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs); -void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs); -void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs); -void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs); -extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); -extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs); -extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs); -extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, - u16 clkctrl_offs); -/* - * In an ideal world, we would not export these low-level functions, - * but this will probably take some time to fix properly - */ -u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx); -void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx); -u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, - u16 inst, s16 idx); -u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst, - s16 idx); -u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst, - s16 idx); -extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, - u32 mask); - -extern void omap_cm_base_init(void); - -#endif diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index e18709d3b95d..aa7b379e2661 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -265,7 +265,6 @@ static struct cpuidle_driver omap3_idle_driver = { .enter = omap3_enter_idle_bm, .exit_latency = 2 + 2, .target_residency = 5, - .flags = CPUIDLE_FLAG_TIME_VALID, .name = "C1", .desc = "MPU ON + CORE ON", }, @@ -273,7 +272,6 @@ static struct cpuidle_driver omap3_idle_driver = { .enter = omap3_enter_idle_bm, .exit_latency = 10 + 10, .target_residency = 30, - .flags = CPUIDLE_FLAG_TIME_VALID, .name = "C2", .desc = "MPU ON + CORE ON", }, @@ -281,7 +279,6 @@ static struct cpuidle_driver omap3_idle_driver = { .enter = omap3_enter_idle_bm, .exit_latency = 50 + 50, .target_residency = 300, - .flags = CPUIDLE_FLAG_TIME_VALID, .name = "C3", .desc = "MPU RET + CORE ON", }, @@ -289,7 +286,6 @@ static struct cpuidle_driver omap3_idle_driver = { .enter = omap3_enter_idle_bm, .exit_latency = 1500 + 1800, .target_residency = 4000, - .flags = CPUIDLE_FLAG_TIME_VALID, .name = "C4", .desc = "MPU OFF + CORE ON", }, @@ -297,7 +293,6 @@ static struct cpuidle_driver omap3_idle_driver = { .enter = omap3_enter_idle_bm, .exit_latency = 2500 + 7500, .target_residency = 12000, - .flags = CPUIDLE_FLAG_TIME_VALID, .name = "C5", .desc = "MPU RET + CORE RET", }, @@ -305,7 +300,6 @@ static struct cpuidle_driver omap3_idle_driver = { .enter = omap3_enter_idle_bm, .exit_latency = 3000 + 8500, .target_residency = 15000, - .flags = CPUIDLE_FLAG_TIME_VALID, .name = "C6", .desc = "MPU OFF + CORE RET", }, @@ -313,7 +307,6 @@ static struct cpuidle_driver omap3_idle_driver = { .enter = omap3_enter_idle_bm, .exit_latency = 10000 + 30000, .target_residency = 30000, - .flags = CPUIDLE_FLAG_TIME_VALID, .name = "C7", .desc = "MPU OFF + CORE OFF", }, diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index 2498ab025fa2..01e398a868bc 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -196,7 +196,6 @@ static struct cpuidle_driver omap4_idle_driver = { /* C1 - CPU0 ON + CPU1 ON + MPU ON */ .exit_latency = 2 + 2, .target_residency = 5, - .flags = CPUIDLE_FLAG_TIME_VALID, .enter = omap_enter_idle_simple, .name = "C1", .desc = "CPUx ON, MPUSS ON" @@ -205,7 +204,7 @@ static struct cpuidle_driver omap4_idle_driver = { /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ .exit_latency = 328 + 440, .target_residency = 960, - .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, + .flags = CPUIDLE_FLAG_COUPLED, .enter = omap_enter_idle_coupled, .name = "C2", .desc = "CPUx OFF, MPUSS CSWR", @@ -214,7 +213,7 @@ static struct cpuidle_driver omap4_idle_driver = { /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */ .exit_latency = 460 + 518, .target_residency = 1100, - .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, + .flags = CPUIDLE_FLAG_COUPLED, .enter = omap_enter_idle_coupled, .name = "C3", .desc = "CPUx OFF, MPUSS OSWR", diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 324f02bf8a51..1afb50d6d636 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -49,7 +49,7 @@ static int __init omap3_l3_init(void) * To avoid code running on other OMAPs in * multi-omap builds */ - if (!(cpu_is_omap34xx())) + if (!(cpu_is_omap34xx()) || of_have_populated_dt()) return -ENODEV; snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main"); @@ -67,62 +67,6 @@ static int __init omap3_l3_init(void) } omap_postcore_initcall(omap3_l3_init); -static int __init omap4_l3_init(void) -{ - int i; - struct omap_hwmod *oh[3]; - struct platform_device *pdev; - char oh_name[L3_MODULES_MAX_LEN]; - - /* If dtb is there, the devices will be created dynamically */ - if (of_have_populated_dt()) - return -ENODEV; - - /* - * To avoid code running on other OMAPs in - * multi-omap builds - */ - if (!cpu_is_omap44xx() && !soc_is_omap54xx()) - return -ENODEV; - - for (i = 0; i < L3_MODULES; i++) { - snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1); - - oh[i] = omap_hwmod_lookup(oh_name); - if (!(oh[i])) - pr_err("could not look up %s\n", oh_name); - } - - pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL, 0); - - WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); - - return PTR_RET(pdev); -} -omap_postcore_initcall(omap4_l3_init); - -#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) - -static struct resource omap2cam_resources[] = { - { - .start = OMAP24XX_CAMERA_BASE, - .end = OMAP24XX_CAMERA_BASE + 0xfff, - .flags = IORESOURCE_MEM, - }, - { - .start = 24 + OMAP_INTC_START, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device omap2cam_device = { - .name = "omap24xxcam", - .id = -1, - .num_resources = ARRAY_SIZE(omap2cam_resources), - .resource = omap2cam_resources, -}; -#endif - #if defined(CONFIG_IOMMU_API) #include <linux/platform_data/iommu-omap.h> @@ -245,14 +189,6 @@ int omap3_init_camera(struct isp_platform_data *pdata) #endif -static inline void omap_init_camera(void) -{ -#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) - if (cpu_is_omap24xx()) - platform_device_register(&omap2cam_device); -#endif -} - #if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE) static inline void __init omap_init_mbox(void) { @@ -431,7 +367,6 @@ static int __init omap2_init_devices(void) * in alphabetical order so they're easier to sort through. */ omap_init_audio(); - omap_init_camera(); /* If dtb is there, the devices will be created dynamically */ if (!of_have_populated_dt()) { omap_init_mbox(); @@ -445,3 +380,29 @@ static int __init omap2_init_devices(void) return 0; } omap_arch_initcall(omap2_init_devices); + +static int __init omap_gpmc_init(void) +{ + struct omap_hwmod *oh; + struct platform_device *pdev; + char *oh_name = "gpmc"; + + /* + * if the board boots up with a populated DT, do not + * manually add the device from this initcall + */ + if (of_have_populated_dt()) + return -ENODEV; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("Could not look up %s\n", oh_name); + return -ENODEV; + } + + pdev = omap_device_build("omap-gpmc", -1, oh, NULL, 0); + WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); + + return PTR_RET(pdev); +} +omap_postcore_initcall(omap_gpmc_init); diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index ac3d789ac3cd..20e120d071dd 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -460,25 +460,24 @@ void omap3_noncore_dpll_disable(struct clk_hw *hw) /* Non-CORE DPLL rate set code */ /** - * omap3_noncore_dpll_set_rate - set non-core DPLL rate - * @clk: struct clk * of DPLL to set - * @rate: rounded target rate + * omap3_noncore_dpll_determine_rate - determine rate for a DPLL + * @hw: pointer to the clock to determine rate for + * @rate: target rate for the DPLL + * @best_parent_rate: pointer for returning best parent rate + * @best_parent_clk: pointer for returning best parent clock * - * Set the DPLL CLKOUT to the target rate. If the DPLL can enter - * low-power bypass, and the target rate is the bypass source clock - * rate, then configure the DPLL for bypass. Otherwise, round the - * target rate if it hasn't been done already, then program and lock - * the DPLL. Returns -EINVAL upon error, or 0 upon success. + * Determines which DPLL mode to use for reaching a desired target rate. + * Checks whether the DPLL shall be in bypass or locked mode, and if + * locked, calculates the M,N values for the DPLL via round-rate. + * Returns a positive clock rate with success, negative error value + * in failure. */ -int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) +long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate, + struct clk **best_parent_clk) { struct clk_hw_omap *clk = to_clk_hw_omap(hw); - struct clk *new_parent = NULL; - unsigned long rrate; - u16 freqsel = 0; struct dpll_data *dd; - int ret; if (!hw || !rate) return -EINVAL; @@ -489,61 +488,121 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, if (__clk_get_rate(dd->clk_bypass) == rate && (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { - pr_debug("%s: %s: set rate: entering bypass.\n", - __func__, __clk_get_name(hw->clk)); + *best_parent_clk = dd->clk_bypass; + } else { + rate = omap2_dpll_round_rate(hw, rate, best_parent_rate); + *best_parent_clk = dd->clk_ref; + } + + *best_parent_rate = rate; + + return rate; +} + +/** + * omap3_noncore_dpll_set_parent - set parent for a DPLL clock + * @hw: pointer to the clock to set parent for + * @index: parent index to select + * + * Sets parent for a DPLL clock. This sets the DPLL into bypass or + * locked mode. Returns 0 with success, negative error value otherwise. + */ +int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + int ret; - __clk_prepare(dd->clk_bypass); - clk_enable(dd->clk_bypass); + if (!hw) + return -EINVAL; + + if (index) ret = _omap3_noncore_dpll_bypass(clk); - if (!ret) - new_parent = dd->clk_bypass; - clk_disable(dd->clk_bypass); - __clk_unprepare(dd->clk_bypass); - } else { - __clk_prepare(dd->clk_ref); - clk_enable(dd->clk_ref); - - /* XXX this check is probably pointless in the CCF context */ - if (dd->last_rounded_rate != rate) { - rrate = __clk_round_rate(hw->clk, rate); - if (rrate != rate) { - pr_warn("%s: %s: final rate %lu does not match desired rate %lu\n", - __func__, __clk_get_name(hw->clk), - rrate, rate); - rate = rrate; - } - } + else + ret = _omap3_noncore_dpll_lock(clk); - if (dd->last_rounded_rate == 0) - return -EINVAL; + return ret; +} - /* Freqsel is available only on OMAP343X devices */ - if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) { - freqsel = _omap3_dpll_compute_freqsel(clk, - dd->last_rounded_n); - WARN_ON(!freqsel); - } +/** + * omap3_noncore_dpll_set_rate - set rate for a DPLL clock + * @hw: pointer to the clock to set parent for + * @rate: target rate for the clock + * @parent_rate: rate of the parent clock + * + * Sets rate for a DPLL clock. First checks if the clock parent is + * reference clock (in bypass mode, the rate of the clock can't be + * changed) and proceeds with the rate change operation. Returns 0 + * with success, negative error value otherwise. + */ +int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *dd; + u16 freqsel = 0; + int ret; + + if (!hw || !rate) + return -EINVAL; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; - pr_debug("%s: %s: set rate: locking rate to %lu.\n", - __func__, __clk_get_name(hw->clk), rate); + if (__clk_get_parent(hw->clk) != dd->clk_ref) + return -EINVAL; + + if (dd->last_rounded_rate == 0) + return -EINVAL; - ret = omap3_noncore_dpll_program(clk, freqsel); - if (!ret) - new_parent = dd->clk_ref; - clk_disable(dd->clk_ref); - __clk_unprepare(dd->clk_ref); + /* Freqsel is available only on OMAP343X devices */ + if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) { + freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); + WARN_ON(!freqsel); } - /* - * FIXME - this is all wrong. common code handles reparenting and - * migrating prepare/enable counts. dplls should be a multiplexer - * clock and this should be a set_parent operation so that all of that - * stuff is inherited for free - */ - if (!ret && clk_get_parent(hw->clk) != new_parent) - __clk_reparent(hw->clk, new_parent); + pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__, + __clk_get_name(hw->clk), rate); - return 0; + ret = omap3_noncore_dpll_program(clk, freqsel); + + return ret; +} + +/** + * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock + * @hw: pointer to the clock to set rate and parent for + * @rate: target rate for the DPLL + * @parent_rate: clock rate of the DPLL parent + * @index: new parent index for the DPLL, 0 - reference, 1 - bypass + * + * Sets rate and parent for a DPLL clock. If new parent is the bypass + * clock, only selects the parent. Otherwise proceeds with a rate + * change, as this will effectively also change the parent as the + * DPLL is put into locked mode. Returns 0 with success, negative error + * value otherwise. + */ +int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate, + u8 index) +{ + int ret; + + if (!hw || !rate) + return -EINVAL; + + /* + * clk-ref at index[0], in which case we only need to set rate, + * the parent will be changed automatically with the lock sequence. + * With clk-bypass case we only need to change parent. + */ + if (index) + ret = omap3_noncore_dpll_set_parent(hw, index); + else + ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate); + + return ret; } /* DPLL autoidle read/set code */ diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c index 4613f1e86988..535822fcf4bb 100644 --- a/arch/arm/mach-omap2/dpll44xx.c +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -207,3 +207,44 @@ out: return dd->last_rounded_rate; } + +/** + * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL + * @hw: pointer to the clock to determine rate for + * @rate: target rate for the DPLL + * @best_parent_rate: pointer for returning best parent rate + * @best_parent_clk: pointer for returning best parent clock + * + * Determines which DPLL mode to use for reaching a desired rate. + * Checks whether the DPLL shall be in bypass or locked mode, and if + * locked, calculates the M,N values for the DPLL via round-rate. + * Returns a positive clock rate with success, negative error value + * in failure. + */ +long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate, + struct clk **best_parent_clk) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *dd; + + if (!hw || !rate) + return -EINVAL; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (__clk_get_rate(dd->clk_bypass) == rate && + (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { + *best_parent_clk = dd->clk_bypass; + } else { + rate = omap4_dpll_regm4xen_round_rate(hw, rate, + best_parent_rate); + *best_parent_clk = dd->clk_ref; + } + + *best_parent_rate = rate; + + return rate; +} diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index cb7764314f17..d5951b17b736 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -12,14 +12,13 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/omap-gpmc.h> #include <linux/mtd/nand.h> #include <linux/platform_data/mtd-nand-omap2.h> #include <asm/mach/flash.h> -#include "gpmc.h" #include "soc.h" -#include "gpmc-nand.h" /* minimum size for IO mapping */ #define NAND_IO_SIZE 4 diff --git a/arch/arm/mach-omap2/gpmc-nand.h b/arch/arm/mach-omap2/gpmc-nand.h deleted file mode 100644 index d59e1281e851..000000000000 --- a/arch/arm/mach-omap2/gpmc-nand.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-omap2/gpmc-nand.h - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __OMAP2_GPMC_NAND_H -#define __OMAP2_GPMC_NAND_H - -#include "gpmc.h" -#include <linux/platform_data/mtd-nand-omap2.h> - -#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) -extern int gpmc_nand_init(struct omap_nand_platform_data *d, - struct gpmc_timings *gpmc_t); -#else -static inline int gpmc_nand_init(struct omap_nand_platform_data *d, - struct gpmc_timings *gpmc_t) -{ - return 0; -} -#endif - -#endif diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 8b6876c98ce1..53d197e0c1f3 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -15,14 +15,13 @@ #include <linux/platform_device.h> #include <linux/mtd/onenand_regs.h> #include <linux/io.h> +#include <linux/omap-gpmc.h> #include <linux/platform_data/mtd-onenand-omap2.h> #include <linux/err.h> #include <asm/mach/flash.h> -#include "gpmc.h" #include "soc.h" -#include "gpmc-onenand.h" #define ONENAND_IO_SIZE SZ_128K diff --git a/arch/arm/mach-omap2/gpmc-onenand.h b/arch/arm/mach-omap2/gpmc-onenand.h deleted file mode 100644 index 216f23a8b45c..000000000000 --- a/arch/arm/mach-omap2/gpmc-onenand.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * arch/arm/mach-omap2/gpmc-onenand.h - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __OMAP2_GPMC_ONENAND_H -#define __OMAP2_GPMC_ONENAND_H - -#include <linux/platform_data/mtd-onenand-omap2.h> - -#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) -extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); -#else -#define board_onenand_data NULL -static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) -{ -} -#endif - -#endif diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c deleted file mode 100644 index 61a063595e66..000000000000 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/gpmc-smc91x.c - * - * Copyright (C) 2009 Nokia Corporation - * Contact: Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/smc91x.h> - -#include "gpmc.h" -#include "gpmc-smc91x.h" - -#include "soc.h" - -static struct omap_smc91x_platform_data *gpmc_cfg; - -static struct resource gpmc_smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ, - }, -}; - -static struct smc91x_platdata gpmc_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct platform_device gpmc_smc91x_device = { - .name = "smc91x", - .id = -1, - .dev = { - .platform_data = &gpmc_smc91x_info, - }, - .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), - .resource = gpmc_smc91x_resources, -}; - -static struct gpmc_settings smc91x_settings = { - .device_width = GPMC_DEVWIDTH_16BIT, -}; - -/* - * Set the gpmc timings for smc91c96. The timings are taken - * from the data sheet available at: - * http://www.smsc.com/main/catalog/lan91c96.html - * REVISIT: Level shifters can add at least to the access latency. - */ -static int smc91c96_gpmc_retime(void) -{ - struct gpmc_timings t; - struct gpmc_device_timings dev_t; - const int t3 = 10; /* Figure 12.2 read and 12.4 write */ - const int t4_r = 20; /* Figure 12.2 read */ - const int t4_w = 5; /* Figure 12.4 write */ - const int t5 = 25; /* Figure 12.2 read */ - const int t6 = 15; /* Figure 12.2 read */ - const int t7 = 5; /* Figure 12.4 write */ - const int t8 = 5; /* Figure 12.4 write */ - const int t20 = 185; /* Figure 12.2 read and 12.4 write */ - - /* - * FIXME: Calculate the address and data bus muxed timings. - * Note that at least adv_rd_off needs to be changed according - * to omap3430 TRM Figure 11-11. Are the sdp boards using the - * FPGA in between smc91x and omap as the timings are different - * from above? - */ - if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) - return 0; - - memset(&dev_t, 0, sizeof(dev_t)); - - dev_t.t_oeasu = t3 * 1000; - dev_t.t_oe = t5 * 1000; - dev_t.t_cez_r = t4_r * 1000; - dev_t.t_oez = t6 * 1000; - dev_t.t_rd_cycle = (t20 - t3) * 1000; - - dev_t.t_weasu = t3 * 1000; - dev_t.t_wpl = t7 * 1000; - dev_t.t_wph = t8 * 1000; - dev_t.t_cez_w = t4_w * 1000; - dev_t.t_wr_cycle = (t20 - t3) * 1000; - - gpmc_calc_timings(&t, &smc91x_settings, &dev_t); - - return gpmc_cs_set_timings(gpmc_cfg->cs, &t); -} - -/* - * Initialize smc91x device connected to the GPMC. Note that we - * assume that pin multiplexing is done in the board-*.c file, - * or in the bootloader. - */ -void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) -{ - unsigned long cs_mem_base; - int ret; - - gpmc_cfg = board_data; - - if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96) - gpmc_cfg->retime = smc91c96_gpmc_retime; - - if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - return; - } - - gpmc_smc91x_resources[0].start = cs_mem_base + 0x300; - gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f; - gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK); - - if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) - smc91x_settings.mux_add_data = GPMC_MUX_AD; - if (gpmc_cfg->flags & GPMC_READ_MON) - smc91x_settings.wait_on_read = true; - if (gpmc_cfg->flags & GPMC_WRITE_MON) - smc91x_settings.wait_on_write = true; - if (gpmc_cfg->wait_pin) - smc91x_settings.wait_pin = gpmc_cfg->wait_pin; - ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings); - if (ret < 0) - goto free1; - - if (gpmc_cfg->retime) { - ret = gpmc_cfg->retime(); - if (ret != 0) - goto free1; - } - - if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0) - goto free1; - - gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); - - if (gpmc_cfg->gpio_pwrdwn) { - ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn, - GPIOF_OUT_INIT_LOW, "SMC91X powerdown"); - if (ret) - goto free2; - } - - if (gpmc_cfg->gpio_reset) { - ret = gpio_request_one(gpmc_cfg->gpio_reset, - GPIOF_OUT_INIT_LOW, "SMC91X reset"); - if (ret) - goto free3; - - gpio_set_value(gpmc_cfg->gpio_reset, 1); - msleep(100); - gpio_set_value(gpmc_cfg->gpio_reset, 0); - } - - if (platform_device_register(&gpmc_smc91x_device) < 0) { - printk(KERN_ERR "Unable to register smc91x device\n"); - gpio_free(gpmc_cfg->gpio_reset); - goto free3; - } - - return; - -free3: - if (gpmc_cfg->gpio_pwrdwn) - gpio_free(gpmc_cfg->gpio_pwrdwn); -free2: - gpio_free(gpmc_cfg->gpio_irq); -free1: - gpmc_cs_free(gpmc_cfg->cs); - - printk(KERN_ERR "Could not initialize smc91x\n"); -} diff --git a/arch/arm/mach-omap2/gpmc-smc91x.h b/arch/arm/mach-omap2/gpmc-smc91x.h deleted file mode 100644 index b64fbee4d567..000000000000 --- a/arch/arm/mach-omap2/gpmc-smc91x.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/gpmc-smc91x.h - * - * Copyright (C) 2009 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__ - -#define GPMC_TIMINGS_SMC91C96 (1 << 4) -#define GPMC_MUX_ADD_DATA (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */ -#define GPMC_READ_MON (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */ -#define GPMC_WRITE_MON (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */ - -struct omap_smc91x_platform_data { - int cs; - int gpio_irq; - int gpio_pwrdwn; - int gpio_reset; - int wait_pin; /* Optional GPMC_CONFIG1_WAITPINSELECT */ - u32 flags; - int (*retime)(void); -}; - -#if defined(CONFIG_SMC91X) || \ - defined(CONFIG_SMC91X_MODULE) - -extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d); - -#else - -#define board_smc91x_data NULL - -static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d) -{ -} - -#endif -#endif diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c deleted file mode 100644 index 5fa3755261ce..000000000000 --- a/arch/arm/mach-omap2/gpmc.c +++ /dev/null @@ -1,1891 +0,0 @@ -/* - * GPMC support functions - * - * Copyright (C) 2005-2006 Nokia Corporation - * - * Author: Juha Yrjola - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/ioport.h> -#include <linux/spinlock.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_mtd.h> -#include <linux/of_device.h> -#include <linux/mtd/nand.h> -#include <linux/pm_runtime.h> - -#include <linux/platform_data/mtd-nand-omap2.h> - -#include <asm/mach-types.h> - -#include "soc.h" -#include "common.h" -#include "omap_device.h" -#include "gpmc.h" -#include "gpmc-nand.h" -#include "gpmc-onenand.h" - -#define DEVICE_NAME "omap-gpmc" - -/* GPMC register offsets */ -#define GPMC_REVISION 0x00 -#define GPMC_SYSCONFIG 0x10 -#define GPMC_SYSSTATUS 0x14 -#define GPMC_IRQSTATUS 0x18 -#define GPMC_IRQENABLE 0x1c -#define GPMC_TIMEOUT_CONTROL 0x40 -#define GPMC_ERR_ADDRESS 0x44 -#define GPMC_ERR_TYPE 0x48 -#define GPMC_CONFIG 0x50 -#define GPMC_STATUS 0x54 -#define GPMC_PREFETCH_CONFIG1 0x1e0 -#define GPMC_PREFETCH_CONFIG2 0x1e4 -#define GPMC_PREFETCH_CONTROL 0x1ec -#define GPMC_PREFETCH_STATUS 0x1f0 -#define GPMC_ECC_CONFIG 0x1f4 -#define GPMC_ECC_CONTROL 0x1f8 -#define GPMC_ECC_SIZE_CONFIG 0x1fc -#define GPMC_ECC1_RESULT 0x200 -#define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */ -#define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */ -#define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */ -#define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */ -#define GPMC_ECC_BCH_RESULT_4 0x300 /* not available on OMAP2 */ -#define GPMC_ECC_BCH_RESULT_5 0x304 /* not available on OMAP2 */ -#define GPMC_ECC_BCH_RESULT_6 0x308 /* not available on OMAP2 */ - -/* GPMC ECC control settings */ -#define GPMC_ECC_CTRL_ECCCLEAR 0x100 -#define GPMC_ECC_CTRL_ECCDISABLE 0x000 -#define GPMC_ECC_CTRL_ECCREG1 0x001 -#define GPMC_ECC_CTRL_ECCREG2 0x002 -#define GPMC_ECC_CTRL_ECCREG3 0x003 -#define GPMC_ECC_CTRL_ECCREG4 0x004 -#define GPMC_ECC_CTRL_ECCREG5 0x005 -#define GPMC_ECC_CTRL_ECCREG6 0x006 -#define GPMC_ECC_CTRL_ECCREG7 0x007 -#define GPMC_ECC_CTRL_ECCREG8 0x008 -#define GPMC_ECC_CTRL_ECCREG9 0x009 - -#define GPMC_CONFIG2_CSEXTRADELAY BIT(7) -#define GPMC_CONFIG3_ADVEXTRADELAY BIT(7) -#define GPMC_CONFIG4_OEEXTRADELAY BIT(7) -#define GPMC_CONFIG4_WEEXTRADELAY BIT(23) -#define GPMC_CONFIG6_CYCLE2CYCLEDIFFCSEN BIT(6) -#define GPMC_CONFIG6_CYCLE2CYCLESAMECSEN BIT(7) - -#define GPMC_CS0_OFFSET 0x60 -#define GPMC_CS_SIZE 0x30 -#define GPMC_BCH_SIZE 0x10 - -#define GPMC_MEM_END 0x3FFFFFFF - -#define GPMC_CHUNK_SHIFT 24 /* 16 MB */ -#define GPMC_SECTION_SHIFT 28 /* 128 MB */ - -#define CS_NUM_SHIFT 24 -#define ENABLE_PREFETCH (0x1 << 7) -#define DMA_MPU_MODE 2 - -#define GPMC_REVISION_MAJOR(l) ((l >> 4) & 0xf) -#define GPMC_REVISION_MINOR(l) (l & 0xf) - -#define GPMC_HAS_WR_ACCESS 0x1 -#define GPMC_HAS_WR_DATA_MUX_BUS 0x2 -#define GPMC_HAS_MUX_AAD 0x4 - -#define GPMC_NR_WAITPINS 4 - -/* XXX: Only NAND irq has been considered,currently these are the only ones used - */ -#define GPMC_NR_IRQ 2 - -struct gpmc_client_irq { - unsigned irq; - u32 bitmask; -}; - -/* Structure to save gpmc cs context */ -struct gpmc_cs_config { - u32 config1; - u32 config2; - u32 config3; - u32 config4; - u32 config5; - u32 config6; - u32 config7; - int is_valid; -}; - -/* - * Structure to save/restore gpmc context - * to support core off on OMAP3 - */ -struct omap3_gpmc_regs { - u32 sysconfig; - u32 irqenable; - u32 timeout_ctrl; - u32 config; - u32 prefetch_config1; - u32 prefetch_config2; - u32 prefetch_control; - struct gpmc_cs_config cs_context[GPMC_CS_NUM]; -}; - -static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ]; -static struct irq_chip gpmc_irq_chip; -static int gpmc_irq_start; - -static struct resource gpmc_mem_root; -static struct resource gpmc_cs_mem[GPMC_CS_NUM]; -static DEFINE_SPINLOCK(gpmc_mem_lock); -/* Define chip-selects as reserved by default until probe completes */ -static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1); -static unsigned int gpmc_cs_num = GPMC_CS_NUM; -static unsigned int gpmc_nr_waitpins; -static struct device *gpmc_dev; -static int gpmc_irq; -static resource_size_t phys_base, mem_size; -static unsigned gpmc_capability; -static void __iomem *gpmc_base; - -static struct clk *gpmc_l3_clk; - -static irqreturn_t gpmc_handle_irq(int irq, void *dev); - -static void gpmc_write_reg(int idx, u32 val) -{ - writel_relaxed(val, gpmc_base + idx); -} - -static u32 gpmc_read_reg(int idx) -{ - return readl_relaxed(gpmc_base + idx); -} - -void gpmc_cs_write_reg(int cs, int idx, u32 val) -{ - void __iomem *reg_addr; - - reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - writel_relaxed(val, reg_addr); -} - -static u32 gpmc_cs_read_reg(int cs, int idx) -{ - void __iomem *reg_addr; - - reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - return readl_relaxed(reg_addr); -} - -/* TODO: Add support for gpmc_fck to clock framework and use it */ -static unsigned long gpmc_get_fclk_period(void) -{ - unsigned long rate = clk_get_rate(gpmc_l3_clk); - - if (rate == 0) { - printk(KERN_WARNING "gpmc_l3_clk not enabled\n"); - return 0; - } - - rate /= 1000; - rate = 1000000000 / rate; /* In picoseconds */ - - return rate; -} - -static unsigned int gpmc_ns_to_ticks(unsigned int time_ns) -{ - unsigned long tick_ps; - - /* Calculate in picosecs to yield more exact results */ - tick_ps = gpmc_get_fclk_period(); - - return (time_ns * 1000 + tick_ps - 1) / tick_ps; -} - -static unsigned int gpmc_ps_to_ticks(unsigned int time_ps) -{ - unsigned long tick_ps; - - /* Calculate in picosecs to yield more exact results */ - tick_ps = gpmc_get_fclk_period(); - - return (time_ps + tick_ps - 1) / tick_ps; -} - -unsigned int gpmc_ticks_to_ns(unsigned int ticks) -{ - return ticks * gpmc_get_fclk_period() / 1000; -} - -static unsigned int gpmc_ticks_to_ps(unsigned int ticks) -{ - return ticks * gpmc_get_fclk_period(); -} - -static unsigned int gpmc_round_ps_to_ticks(unsigned int time_ps) -{ - unsigned long ticks = gpmc_ps_to_ticks(time_ps); - - return ticks * gpmc_get_fclk_period(); -} - -static inline void gpmc_cs_modify_reg(int cs, int reg, u32 mask, bool value) -{ - u32 l; - - l = gpmc_cs_read_reg(cs, reg); - if (value) - l |= mask; - else - l &= ~mask; - gpmc_cs_write_reg(cs, reg, l); -} - -static void gpmc_cs_bool_timings(int cs, const struct gpmc_bool_timings *p) -{ - gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG1, - GPMC_CONFIG1_TIME_PARA_GRAN, - p->time_para_granularity); - gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG2, - GPMC_CONFIG2_CSEXTRADELAY, p->cs_extra_delay); - gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG3, - GPMC_CONFIG3_ADVEXTRADELAY, p->adv_extra_delay); - gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4, - GPMC_CONFIG4_OEEXTRADELAY, p->oe_extra_delay); - gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4, - GPMC_CONFIG4_OEEXTRADELAY, p->we_extra_delay); - gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG6, - GPMC_CONFIG6_CYCLE2CYCLESAMECSEN, - p->cycle2cyclesamecsen); - gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG6, - GPMC_CONFIG6_CYCLE2CYCLEDIFFCSEN, - p->cycle2cyclediffcsen); -} - -#ifdef DEBUG -static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, - int time, const char *name) -#else -static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, - int time) -#endif -{ - u32 l; - int ticks, mask, nr_bits; - - if (time == 0) - ticks = 0; - else - ticks = gpmc_ns_to_ticks(time); - nr_bits = end_bit - st_bit + 1; - if (ticks >= 1 << nr_bits) { -#ifdef DEBUG - printk(KERN_INFO "GPMC CS%d: %-10s* %3d ns, %3d ticks >= %d\n", - cs, name, time, ticks, 1 << nr_bits); -#endif - return -1; - } - - mask = (1 << nr_bits) - 1; - l = gpmc_cs_read_reg(cs, reg); -#ifdef DEBUG - printk(KERN_INFO - "GPMC CS%d: %-10s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n", - cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000, - (l >> st_bit) & mask, time); -#endif - l &= ~(mask << st_bit); - l |= ticks << st_bit; - gpmc_cs_write_reg(cs, reg, l); - - return 0; -} - -#ifdef DEBUG -#define GPMC_SET_ONE(reg, st, end, field) \ - if (set_gpmc_timing_reg(cs, (reg), (st), (end), \ - t->field, #field) < 0) \ - return -1 -#else -#define GPMC_SET_ONE(reg, st, end, field) \ - if (set_gpmc_timing_reg(cs, (reg), (st), (end), t->field) < 0) \ - return -1 -#endif - -int gpmc_calc_divider(unsigned int sync_clk) -{ - int div; - u32 l; - - l = sync_clk + (gpmc_get_fclk_period() - 1); - div = l / gpmc_get_fclk_period(); - if (div > 4) - return -1; - if (div <= 0) - div = 1; - - return div; -} - -int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) -{ - int div; - u32 l; - - div = gpmc_calc_divider(t->sync_clk); - if (div < 0) - return div; - - GPMC_SET_ONE(GPMC_CS_CONFIG2, 0, 3, cs_on); - GPMC_SET_ONE(GPMC_CS_CONFIG2, 8, 12, cs_rd_off); - GPMC_SET_ONE(GPMC_CS_CONFIG2, 16, 20, cs_wr_off); - - GPMC_SET_ONE(GPMC_CS_CONFIG3, 0, 3, adv_on); - GPMC_SET_ONE(GPMC_CS_CONFIG3, 8, 12, adv_rd_off); - GPMC_SET_ONE(GPMC_CS_CONFIG3, 16, 20, adv_wr_off); - - GPMC_SET_ONE(GPMC_CS_CONFIG4, 0, 3, oe_on); - GPMC_SET_ONE(GPMC_CS_CONFIG4, 8, 12, oe_off); - GPMC_SET_ONE(GPMC_CS_CONFIG4, 16, 19, we_on); - GPMC_SET_ONE(GPMC_CS_CONFIG4, 24, 28, we_off); - - GPMC_SET_ONE(GPMC_CS_CONFIG5, 0, 4, rd_cycle); - GPMC_SET_ONE(GPMC_CS_CONFIG5, 8, 12, wr_cycle); - GPMC_SET_ONE(GPMC_CS_CONFIG5, 16, 20, access); - - GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access); - - GPMC_SET_ONE(GPMC_CS_CONFIG6, 0, 3, bus_turnaround); - GPMC_SET_ONE(GPMC_CS_CONFIG6, 8, 11, cycle2cycle_delay); - - GPMC_SET_ONE(GPMC_CS_CONFIG1, 18, 19, wait_monitoring); - GPMC_SET_ONE(GPMC_CS_CONFIG1, 25, 26, clk_activation); - - if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS) - GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus); - if (gpmc_capability & GPMC_HAS_WR_ACCESS) - GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access); - - /* caller is expected to have initialized CONFIG1 to cover - * at least sync vs async - */ - l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - if (l & (GPMC_CONFIG1_READTYPE_SYNC | GPMC_CONFIG1_WRITETYPE_SYNC)) { -#ifdef DEBUG - printk(KERN_INFO "GPMC CS%d CLK period is %lu ns (div %d)\n", - cs, (div * gpmc_get_fclk_period()) / 1000, div); -#endif - l &= ~0x03; - l |= (div - 1); - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l); - } - - gpmc_cs_bool_timings(cs, &t->bool_timings); - - return 0; -} - -static int gpmc_cs_enable_mem(int cs, u32 base, u32 size) -{ - u32 l; - u32 mask; - - /* - * Ensure that base address is aligned on a - * boundary equal to or greater than size. - */ - if (base & (size - 1)) - return -EINVAL; - - mask = (1 << GPMC_SECTION_SHIFT) - size; - l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - l &= ~0x3f; - l = (base >> GPMC_CHUNK_SHIFT) & 0x3f; - l &= ~(0x0f << 8); - l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8; - l |= GPMC_CONFIG7_CSVALID; - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l); - - return 0; -} - -static void gpmc_cs_disable_mem(int cs) -{ - u32 l; - - l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - l &= ~GPMC_CONFIG7_CSVALID; - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l); -} - -static void gpmc_cs_get_memconf(int cs, u32 *base, u32 *size) -{ - u32 l; - u32 mask; - - l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - *base = (l & 0x3f) << GPMC_CHUNK_SHIFT; - mask = (l >> 8) & 0x0f; - *size = (1 << GPMC_SECTION_SHIFT) - (mask << GPMC_CHUNK_SHIFT); -} - -static int gpmc_cs_mem_enabled(int cs) -{ - u32 l; - - l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - return l & GPMC_CONFIG7_CSVALID; -} - -static void gpmc_cs_set_reserved(int cs, int reserved) -{ - gpmc_cs_map &= ~(1 << cs); - gpmc_cs_map |= (reserved ? 1 : 0) << cs; -} - -static bool gpmc_cs_reserved(int cs) -{ - return gpmc_cs_map & (1 << cs); -} - -static unsigned long gpmc_mem_align(unsigned long size) -{ - int order; - - size = (size - 1) >> (GPMC_CHUNK_SHIFT - 1); - order = GPMC_CHUNK_SHIFT - 1; - do { - size >>= 1; - order++; - } while (size); - size = 1 << order; - return size; -} - -static int gpmc_cs_insert_mem(int cs, unsigned long base, unsigned long size) -{ - struct resource *res = &gpmc_cs_mem[cs]; - int r; - - size = gpmc_mem_align(size); - spin_lock(&gpmc_mem_lock); - res->start = base; - res->end = base + size - 1; - r = request_resource(&gpmc_mem_root, res); - spin_unlock(&gpmc_mem_lock); - - return r; -} - -static int gpmc_cs_delete_mem(int cs) -{ - struct resource *res = &gpmc_cs_mem[cs]; - int r; - - spin_lock(&gpmc_mem_lock); - r = release_resource(res); - res->start = 0; - res->end = 0; - spin_unlock(&gpmc_mem_lock); - - return r; -} - -/** - * gpmc_cs_remap - remaps a chip-select physical base address - * @cs: chip-select to remap - * @base: physical base address to re-map chip-select to - * - * Re-maps a chip-select to a new physical base address specified by - * "base". Returns 0 on success and appropriate negative error code - * on failure. - */ -static int gpmc_cs_remap(int cs, u32 base) -{ - int ret; - u32 old_base, size; - - if (cs > gpmc_cs_num) { - pr_err("%s: requested chip-select is disabled\n", __func__); - return -ENODEV; - } - - /* - * Make sure we ignore any device offsets from the GPMC partition - * allocated for the chip select and that the new base confirms - * to the GPMC 16MB minimum granularity. - */ - base &= ~(SZ_16M - 1); - - gpmc_cs_get_memconf(cs, &old_base, &size); - if (base == old_base) - return 0; - gpmc_cs_disable_mem(cs); - ret = gpmc_cs_delete_mem(cs); - if (ret < 0) - return ret; - ret = gpmc_cs_insert_mem(cs, base, size); - if (ret < 0) - return ret; - ret = gpmc_cs_enable_mem(cs, base, size); - if (ret < 0) - return ret; - - return 0; -} - -int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) -{ - struct resource *res = &gpmc_cs_mem[cs]; - int r = -1; - - if (cs > gpmc_cs_num) { - pr_err("%s: requested chip-select is disabled\n", __func__); - return -ENODEV; - } - size = gpmc_mem_align(size); - if (size > (1 << GPMC_SECTION_SHIFT)) - return -ENOMEM; - - spin_lock(&gpmc_mem_lock); - if (gpmc_cs_reserved(cs)) { - r = -EBUSY; - goto out; - } - if (gpmc_cs_mem_enabled(cs)) - r = adjust_resource(res, res->start & ~(size - 1), size); - if (r < 0) - r = allocate_resource(&gpmc_mem_root, res, size, 0, ~0, - size, NULL, NULL); - if (r < 0) - goto out; - - r = gpmc_cs_enable_mem(cs, res->start, resource_size(res)); - if (r < 0) { - release_resource(res); - goto out; - } - - *base = res->start; - gpmc_cs_set_reserved(cs, 1); -out: - spin_unlock(&gpmc_mem_lock); - return r; -} -EXPORT_SYMBOL(gpmc_cs_request); - -void gpmc_cs_free(int cs) -{ - struct resource *res = &gpmc_cs_mem[cs]; - - spin_lock(&gpmc_mem_lock); - if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) { - printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs); - BUG(); - spin_unlock(&gpmc_mem_lock); - return; - } - gpmc_cs_disable_mem(cs); - if (res->flags) - release_resource(res); - gpmc_cs_set_reserved(cs, 0); - spin_unlock(&gpmc_mem_lock); -} -EXPORT_SYMBOL(gpmc_cs_free); - -/** - * gpmc_configure - write request to configure gpmc - * @cmd: command type - * @wval: value to write - * @return status of the operation - */ -int gpmc_configure(int cmd, int wval) -{ - u32 regval; - - switch (cmd) { - case GPMC_ENABLE_IRQ: - gpmc_write_reg(GPMC_IRQENABLE, wval); - break; - - case GPMC_SET_IRQ_STATUS: - gpmc_write_reg(GPMC_IRQSTATUS, wval); - break; - - case GPMC_CONFIG_WP: - regval = gpmc_read_reg(GPMC_CONFIG); - if (wval) - regval &= ~GPMC_CONFIG_WRITEPROTECT; /* WP is ON */ - else - regval |= GPMC_CONFIG_WRITEPROTECT; /* WP is OFF */ - gpmc_write_reg(GPMC_CONFIG, regval); - break; - - default: - pr_err("%s: command not supported\n", __func__); - return -EINVAL; - } - - return 0; -} -EXPORT_SYMBOL(gpmc_configure); - -void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) -{ - int i; - - reg->gpmc_status = gpmc_base + GPMC_STATUS; - reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET + - GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs; - reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET + - GPMC_CS_NAND_ADDRESS + GPMC_CS_SIZE * cs; - reg->gpmc_nand_data = gpmc_base + GPMC_CS0_OFFSET + - GPMC_CS_NAND_DATA + GPMC_CS_SIZE * cs; - reg->gpmc_prefetch_config1 = gpmc_base + GPMC_PREFETCH_CONFIG1; - reg->gpmc_prefetch_config2 = gpmc_base + GPMC_PREFETCH_CONFIG2; - reg->gpmc_prefetch_control = gpmc_base + GPMC_PREFETCH_CONTROL; - reg->gpmc_prefetch_status = gpmc_base + GPMC_PREFETCH_STATUS; - reg->gpmc_ecc_config = gpmc_base + GPMC_ECC_CONFIG; - reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL; - reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG; - reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT; - - for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) { - reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 + - GPMC_BCH_SIZE * i; - reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 + - GPMC_BCH_SIZE * i; - reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 + - GPMC_BCH_SIZE * i; - reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 + - GPMC_BCH_SIZE * i; - reg->gpmc_bch_result4[i] = gpmc_base + GPMC_ECC_BCH_RESULT_4 + - i * GPMC_BCH_SIZE; - reg->gpmc_bch_result5[i] = gpmc_base + GPMC_ECC_BCH_RESULT_5 + - i * GPMC_BCH_SIZE; - reg->gpmc_bch_result6[i] = gpmc_base + GPMC_ECC_BCH_RESULT_6 + - i * GPMC_BCH_SIZE; - } -} - -int gpmc_get_client_irq(unsigned irq_config) -{ - int i; - - if (hweight32(irq_config) > 1) - return 0; - - for (i = 0; i < GPMC_NR_IRQ; i++) - if (gpmc_client_irq[i].bitmask & irq_config) - return gpmc_client_irq[i].irq; - - return 0; -} - -static int gpmc_irq_endis(unsigned irq, bool endis) -{ - int i; - u32 regval; - - for (i = 0; i < GPMC_NR_IRQ; i++) - if (irq == gpmc_client_irq[i].irq) { - regval = gpmc_read_reg(GPMC_IRQENABLE); - if (endis) - regval |= gpmc_client_irq[i].bitmask; - else - regval &= ~gpmc_client_irq[i].bitmask; - gpmc_write_reg(GPMC_IRQENABLE, regval); - break; - } - - return 0; -} - -static void gpmc_irq_disable(struct irq_data *p) -{ - gpmc_irq_endis(p->irq, false); -} - -static void gpmc_irq_enable(struct irq_data *p) -{ - gpmc_irq_endis(p->irq, true); -} - -static void gpmc_irq_noop(struct irq_data *data) { } - -static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; } - -static int gpmc_setup_irq(void) -{ - int i; - u32 regval; - - if (!gpmc_irq) - return -EINVAL; - - gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0); - if (gpmc_irq_start < 0) { - pr_err("irq_alloc_descs failed\n"); - return gpmc_irq_start; - } - - gpmc_irq_chip.name = "gpmc"; - gpmc_irq_chip.irq_startup = gpmc_irq_noop_ret; - gpmc_irq_chip.irq_enable = gpmc_irq_enable; - gpmc_irq_chip.irq_disable = gpmc_irq_disable; - gpmc_irq_chip.irq_shutdown = gpmc_irq_noop; - gpmc_irq_chip.irq_ack = gpmc_irq_noop; - gpmc_irq_chip.irq_mask = gpmc_irq_noop; - gpmc_irq_chip.irq_unmask = gpmc_irq_noop; - - gpmc_client_irq[0].bitmask = GPMC_IRQ_FIFOEVENTENABLE; - gpmc_client_irq[1].bitmask = GPMC_IRQ_COUNT_EVENT; - - for (i = 0; i < GPMC_NR_IRQ; i++) { - gpmc_client_irq[i].irq = gpmc_irq_start + i; - irq_set_chip_and_handler(gpmc_client_irq[i].irq, - &gpmc_irq_chip, handle_simple_irq); - set_irq_flags(gpmc_client_irq[i].irq, - IRQF_VALID | IRQF_NOAUTOEN); - } - - /* Disable interrupts */ - gpmc_write_reg(GPMC_IRQENABLE, 0); - - /* clear interrupts */ - regval = gpmc_read_reg(GPMC_IRQSTATUS); - gpmc_write_reg(GPMC_IRQSTATUS, regval); - - return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL); -} - -static int gpmc_free_irq(void) -{ - int i; - - if (gpmc_irq) - free_irq(gpmc_irq, NULL); - - for (i = 0; i < GPMC_NR_IRQ; i++) { - irq_set_handler(gpmc_client_irq[i].irq, NULL); - irq_set_chip(gpmc_client_irq[i].irq, &no_irq_chip); - irq_modify_status(gpmc_client_irq[i].irq, 0, 0); - } - - irq_free_descs(gpmc_irq_start, GPMC_NR_IRQ); - - return 0; -} - -static void gpmc_mem_exit(void) -{ - int cs; - - for (cs = 0; cs < gpmc_cs_num; cs++) { - if (!gpmc_cs_mem_enabled(cs)) - continue; - gpmc_cs_delete_mem(cs); - } - -} - -static void gpmc_mem_init(void) -{ - int cs; - - /* - * The first 1MB of GPMC address space is typically mapped to - * the internal ROM. Never allocate the first page, to - * facilitate bug detection; even if we didn't boot from ROM. - */ - gpmc_mem_root.start = SZ_1M; - gpmc_mem_root.end = GPMC_MEM_END; - - /* Reserve all regions that has been set up by bootloader */ - for (cs = 0; cs < gpmc_cs_num; cs++) { - u32 base, size; - - if (!gpmc_cs_mem_enabled(cs)) - continue; - gpmc_cs_get_memconf(cs, &base, &size); - if (gpmc_cs_insert_mem(cs, base, size)) { - pr_warn("%s: disabling cs %d mapped at 0x%x-0x%x\n", - __func__, cs, base, base + size); - gpmc_cs_disable_mem(cs); - } - } -} - -static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk) -{ - u32 temp; - int div; - - div = gpmc_calc_divider(sync_clk); - temp = gpmc_ps_to_ticks(time_ps); - temp = (temp + div - 1) / div; - return gpmc_ticks_to_ps(temp * div); -} - -/* XXX: can the cycles be avoided ? */ -static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t, - bool mux) -{ - u32 temp; - - /* adv_rd_off */ - temp = dev_t->t_avdp_r; - /* XXX: mux check required ? */ - if (mux) { - /* XXX: t_avdp not to be required for sync, only added for tusb - * this indirectly necessitates requirement of t_avdp_r and - * t_avdp_w instead of having a single t_avdp - */ - temp = max_t(u32, temp, gpmc_t->clk_activation + dev_t->t_avdh); - temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp); - } - gpmc_t->adv_rd_off = gpmc_round_ps_to_ticks(temp); - - /* oe_on */ - temp = dev_t->t_oeasu; /* XXX: remove this ? */ - if (mux) { - temp = max_t(u32, temp, gpmc_t->clk_activation + dev_t->t_ach); - temp = max_t(u32, temp, gpmc_t->adv_rd_off + - gpmc_ticks_to_ps(dev_t->cyc_aavdh_oe)); - } - gpmc_t->oe_on = gpmc_round_ps_to_ticks(temp); - - /* access */ - /* XXX: any scope for improvement ?, by combining oe_on - * and clk_activation, need to check whether - * access = clk_activation + round to sync clk ? - */ - temp = max_t(u32, dev_t->t_iaa, dev_t->cyc_iaa * gpmc_t->sync_clk); - temp += gpmc_t->clk_activation; - if (dev_t->cyc_oe) - temp = max_t(u32, temp, gpmc_t->oe_on + - gpmc_ticks_to_ps(dev_t->cyc_oe)); - gpmc_t->access = gpmc_round_ps_to_ticks(temp); - - gpmc_t->oe_off = gpmc_t->access + gpmc_ticks_to_ps(1); - gpmc_t->cs_rd_off = gpmc_t->oe_off; - - /* rd_cycle */ - temp = max_t(u32, dev_t->t_cez_r, dev_t->t_oez); - temp = gpmc_round_ps_to_sync_clk(temp, gpmc_t->sync_clk) + - gpmc_t->access; - /* XXX: barter t_ce_rdyz with t_cez_r ? */ - if (dev_t->t_ce_rdyz) - temp = max_t(u32, temp, gpmc_t->cs_rd_off + dev_t->t_ce_rdyz); - gpmc_t->rd_cycle = gpmc_round_ps_to_ticks(temp); - - return 0; -} - -static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t, - bool mux) -{ - u32 temp; - - /* adv_wr_off */ - temp = dev_t->t_avdp_w; - if (mux) { - temp = max_t(u32, temp, - gpmc_t->clk_activation + dev_t->t_avdh); - temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp); - } - gpmc_t->adv_wr_off = gpmc_round_ps_to_ticks(temp); - - /* wr_data_mux_bus */ - temp = max_t(u32, dev_t->t_weasu, - gpmc_t->clk_activation + dev_t->t_rdyo); - /* XXX: shouldn't mux be kept as a whole for wr_data_mux_bus ?, - * and in that case remember to handle we_on properly - */ - if (mux) { - temp = max_t(u32, temp, - gpmc_t->adv_wr_off + dev_t->t_aavdh); - temp = max_t(u32, temp, gpmc_t->adv_wr_off + - gpmc_ticks_to_ps(dev_t->cyc_aavdh_we)); - } - gpmc_t->wr_data_mux_bus = gpmc_round_ps_to_ticks(temp); - - /* we_on */ - if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS) - gpmc_t->we_on = gpmc_round_ps_to_ticks(dev_t->t_weasu); - else - gpmc_t->we_on = gpmc_t->wr_data_mux_bus; - - /* wr_access */ - /* XXX: gpmc_capability check reqd ? , even if not, will not harm */ - gpmc_t->wr_access = gpmc_t->access; - - /* we_off */ - temp = gpmc_t->we_on + dev_t->t_wpl; - temp = max_t(u32, temp, - gpmc_t->wr_access + gpmc_ticks_to_ps(1)); - temp = max_t(u32, temp, - gpmc_t->we_on + gpmc_ticks_to_ps(dev_t->cyc_wpl)); - gpmc_t->we_off = gpmc_round_ps_to_ticks(temp); - - gpmc_t->cs_wr_off = gpmc_round_ps_to_ticks(gpmc_t->we_off + - dev_t->t_wph); - - /* wr_cycle */ - temp = gpmc_round_ps_to_sync_clk(dev_t->t_cez_w, gpmc_t->sync_clk); - temp += gpmc_t->wr_access; - /* XXX: barter t_ce_rdyz with t_cez_w ? */ - if (dev_t->t_ce_rdyz) - temp = max_t(u32, temp, - gpmc_t->cs_wr_off + dev_t->t_ce_rdyz); - gpmc_t->wr_cycle = gpmc_round_ps_to_ticks(temp); - - return 0; -} - -static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t, - bool mux) -{ - u32 temp; - - /* adv_rd_off */ - temp = dev_t->t_avdp_r; - if (mux) - temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp); - gpmc_t->adv_rd_off = gpmc_round_ps_to_ticks(temp); - - /* oe_on */ - temp = dev_t->t_oeasu; - if (mux) - temp = max_t(u32, temp, - gpmc_t->adv_rd_off + dev_t->t_aavdh); - gpmc_t->oe_on = gpmc_round_ps_to_ticks(temp); - - /* access */ - temp = max_t(u32, dev_t->t_iaa, /* XXX: remove t_iaa in async ? */ - gpmc_t->oe_on + dev_t->t_oe); - temp = max_t(u32, temp, - gpmc_t->cs_on + dev_t->t_ce); - temp = max_t(u32, temp, - gpmc_t->adv_on + dev_t->t_aa); - gpmc_t->access = gpmc_round_ps_to_ticks(temp); - - gpmc_t->oe_off = gpmc_t->access + gpmc_ticks_to_ps(1); - gpmc_t->cs_rd_off = gpmc_t->oe_off; - - /* rd_cycle */ - temp = max_t(u32, dev_t->t_rd_cycle, - gpmc_t->cs_rd_off + dev_t->t_cez_r); - temp = max_t(u32, temp, gpmc_t->oe_off + dev_t->t_oez); - gpmc_t->rd_cycle = gpmc_round_ps_to_ticks(temp); - - return 0; -} - -static int gpmc_calc_async_write_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t, - bool mux) -{ - u32 temp; - - /* adv_wr_off */ - temp = dev_t->t_avdp_w; - if (mux) - temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp); - gpmc_t->adv_wr_off = gpmc_round_ps_to_ticks(temp); - - /* wr_data_mux_bus */ - temp = dev_t->t_weasu; - if (mux) { - temp = max_t(u32, temp, gpmc_t->adv_wr_off + dev_t->t_aavdh); - temp = max_t(u32, temp, gpmc_t->adv_wr_off + - gpmc_ticks_to_ps(dev_t->cyc_aavdh_we)); - } - gpmc_t->wr_data_mux_bus = gpmc_round_ps_to_ticks(temp); - - /* we_on */ - if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS) - gpmc_t->we_on = gpmc_round_ps_to_ticks(dev_t->t_weasu); - else - gpmc_t->we_on = gpmc_t->wr_data_mux_bus; - - /* we_off */ - temp = gpmc_t->we_on + dev_t->t_wpl; - gpmc_t->we_off = gpmc_round_ps_to_ticks(temp); - - gpmc_t->cs_wr_off = gpmc_round_ps_to_ticks(gpmc_t->we_off + - dev_t->t_wph); - - /* wr_cycle */ - temp = max_t(u32, dev_t->t_wr_cycle, - gpmc_t->cs_wr_off + dev_t->t_cez_w); - gpmc_t->wr_cycle = gpmc_round_ps_to_ticks(temp); - - return 0; -} - -static int gpmc_calc_sync_common_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) -{ - u32 temp; - - gpmc_t->sync_clk = gpmc_calc_divider(dev_t->clk) * - gpmc_get_fclk_period(); - - gpmc_t->page_burst_access = gpmc_round_ps_to_sync_clk( - dev_t->t_bacc, - gpmc_t->sync_clk); - - temp = max_t(u32, dev_t->t_ces, dev_t->t_avds); - gpmc_t->clk_activation = gpmc_round_ps_to_ticks(temp); - - if (gpmc_calc_divider(gpmc_t->sync_clk) != 1) - return 0; - - if (dev_t->ce_xdelay) - gpmc_t->bool_timings.cs_extra_delay = true; - if (dev_t->avd_xdelay) - gpmc_t->bool_timings.adv_extra_delay = true; - if (dev_t->oe_xdelay) - gpmc_t->bool_timings.oe_extra_delay = true; - if (dev_t->we_xdelay) - gpmc_t->bool_timings.we_extra_delay = true; - - return 0; -} - -static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t, - bool sync) -{ - u32 temp; - - /* cs_on */ - gpmc_t->cs_on = gpmc_round_ps_to_ticks(dev_t->t_ceasu); - - /* adv_on */ - temp = dev_t->t_avdasu; - if (dev_t->t_ce_avd) - temp = max_t(u32, temp, - gpmc_t->cs_on + dev_t->t_ce_avd); - gpmc_t->adv_on = gpmc_round_ps_to_ticks(temp); - - if (sync) - gpmc_calc_sync_common_timings(gpmc_t, dev_t); - - return 0; -} - -/* TODO: remove this function once all peripherals are confirmed to - * work with generic timing. Simultaneously gpmc_cs_set_timings() - * has to be modified to handle timings in ps instead of ns -*/ -static void gpmc_convert_ps_to_ns(struct gpmc_timings *t) -{ - t->cs_on /= 1000; - t->cs_rd_off /= 1000; - t->cs_wr_off /= 1000; - t->adv_on /= 1000; - t->adv_rd_off /= 1000; - t->adv_wr_off /= 1000; - t->we_on /= 1000; - t->we_off /= 1000; - t->oe_on /= 1000; - t->oe_off /= 1000; - t->page_burst_access /= 1000; - t->access /= 1000; - t->rd_cycle /= 1000; - t->wr_cycle /= 1000; - t->bus_turnaround /= 1000; - t->cycle2cycle_delay /= 1000; - t->wait_monitoring /= 1000; - t->clk_activation /= 1000; - t->wr_access /= 1000; - t->wr_data_mux_bus /= 1000; -} - -int gpmc_calc_timings(struct gpmc_timings *gpmc_t, - struct gpmc_settings *gpmc_s, - struct gpmc_device_timings *dev_t) -{ - bool mux = false, sync = false; - - if (gpmc_s) { - mux = gpmc_s->mux_add_data ? true : false; - sync = (gpmc_s->sync_read || gpmc_s->sync_write); - } - - memset(gpmc_t, 0, sizeof(*gpmc_t)); - - gpmc_calc_common_timings(gpmc_t, dev_t, sync); - - if (gpmc_s && gpmc_s->sync_read) - gpmc_calc_sync_read_timings(gpmc_t, dev_t, mux); - else - gpmc_calc_async_read_timings(gpmc_t, dev_t, mux); - - if (gpmc_s && gpmc_s->sync_write) - gpmc_calc_sync_write_timings(gpmc_t, dev_t, mux); - else - gpmc_calc_async_write_timings(gpmc_t, dev_t, mux); - - /* TODO: remove, see function definition */ - gpmc_convert_ps_to_ns(gpmc_t); - - return 0; -} - -/** - * gpmc_cs_program_settings - programs non-timing related settings - * @cs: GPMC chip-select to program - * @p: pointer to GPMC settings structure - * - * Programs non-timing related settings for a GPMC chip-select, such as - * bus-width, burst configuration, etc. Function should be called once - * for each chip-select that is being used and must be called before - * calling gpmc_cs_set_timings() as timing parameters in the CONFIG1 - * register will be initialised to zero by this function. Returns 0 on - * success and appropriate negative error code on failure. - */ -int gpmc_cs_program_settings(int cs, struct gpmc_settings *p) -{ - u32 config1; - - if ((!p->device_width) || (p->device_width > GPMC_DEVWIDTH_16BIT)) { - pr_err("%s: invalid width %d!", __func__, p->device_width); - return -EINVAL; - } - - /* Address-data multiplexing not supported for NAND devices */ - if (p->device_nand && p->mux_add_data) { - pr_err("%s: invalid configuration!\n", __func__); - return -EINVAL; - } - - if ((p->mux_add_data > GPMC_MUX_AD) || - ((p->mux_add_data == GPMC_MUX_AAD) && - !(gpmc_capability & GPMC_HAS_MUX_AAD))) { - pr_err("%s: invalid multiplex configuration!\n", __func__); - return -EINVAL; - } - - /* Page/burst mode supports lengths of 4, 8 and 16 bytes */ - if (p->burst_read || p->burst_write) { - switch (p->burst_len) { - case GPMC_BURST_4: - case GPMC_BURST_8: - case GPMC_BURST_16: - break; - default: - pr_err("%s: invalid page/burst-length (%d)\n", - __func__, p->burst_len); - return -EINVAL; - } - } - - if (p->wait_pin > gpmc_nr_waitpins) { - pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin); - return -EINVAL; - } - - config1 = GPMC_CONFIG1_DEVICESIZE((p->device_width - 1)); - - if (p->sync_read) - config1 |= GPMC_CONFIG1_READTYPE_SYNC; - if (p->sync_write) - config1 |= GPMC_CONFIG1_WRITETYPE_SYNC; - if (p->wait_on_read) - config1 |= GPMC_CONFIG1_WAIT_READ_MON; - if (p->wait_on_write) - config1 |= GPMC_CONFIG1_WAIT_WRITE_MON; - if (p->wait_on_read || p->wait_on_write) - config1 |= GPMC_CONFIG1_WAIT_PIN_SEL(p->wait_pin); - if (p->device_nand) - config1 |= GPMC_CONFIG1_DEVICETYPE(GPMC_DEVICETYPE_NAND); - if (p->mux_add_data) - config1 |= GPMC_CONFIG1_MUXTYPE(p->mux_add_data); - if (p->burst_read) - config1 |= GPMC_CONFIG1_READMULTIPLE_SUPP; - if (p->burst_write) - config1 |= GPMC_CONFIG1_WRITEMULTIPLE_SUPP; - if (p->burst_read || p->burst_write) { - config1 |= GPMC_CONFIG1_PAGE_LEN(p->burst_len >> 3); - config1 |= p->burst_wrap ? GPMC_CONFIG1_WRAPBURST_SUPP : 0; - } - - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, config1); - - return 0; -} - -#ifdef CONFIG_OF -static const struct of_device_id gpmc_dt_ids[] = { - { .compatible = "ti,omap2420-gpmc" }, - { .compatible = "ti,omap2430-gpmc" }, - { .compatible = "ti,omap3430-gpmc" }, /* omap3430 & omap3630 */ - { .compatible = "ti,omap4430-gpmc" }, /* omap4430 & omap4460 & omap543x */ - { .compatible = "ti,am3352-gpmc" }, /* am335x devices */ - { } -}; -MODULE_DEVICE_TABLE(of, gpmc_dt_ids); - -/** - * gpmc_read_settings_dt - read gpmc settings from device-tree - * @np: pointer to device-tree node for a gpmc child device - * @p: pointer to gpmc settings structure - * - * Reads the GPMC settings for a GPMC child device from device-tree and - * stores them in the GPMC settings structure passed. The GPMC settings - * structure is initialised to zero by this function and so any - * previously stored settings will be cleared. - */ -void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p) -{ - memset(p, 0, sizeof(struct gpmc_settings)); - - p->sync_read = of_property_read_bool(np, "gpmc,sync-read"); - p->sync_write = of_property_read_bool(np, "gpmc,sync-write"); - of_property_read_u32(np, "gpmc,device-width", &p->device_width); - of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data); - - if (!of_property_read_u32(np, "gpmc,burst-length", &p->burst_len)) { - p->burst_wrap = of_property_read_bool(np, "gpmc,burst-wrap"); - p->burst_read = of_property_read_bool(np, "gpmc,burst-read"); - p->burst_write = of_property_read_bool(np, "gpmc,burst-write"); - if (!p->burst_read && !p->burst_write) - pr_warn("%s: page/burst-length set but not used!\n", - __func__); - } - - if (!of_property_read_u32(np, "gpmc,wait-pin", &p->wait_pin)) { - p->wait_on_read = of_property_read_bool(np, - "gpmc,wait-on-read"); - p->wait_on_write = of_property_read_bool(np, - "gpmc,wait-on-write"); - if (!p->wait_on_read && !p->wait_on_write) - pr_debug("%s: rd/wr wait monitoring not enabled!\n", - __func__); - } -} - -static void __maybe_unused gpmc_read_timings_dt(struct device_node *np, - struct gpmc_timings *gpmc_t) -{ - struct gpmc_bool_timings *p; - - if (!np || !gpmc_t) - return; - - memset(gpmc_t, 0, sizeof(*gpmc_t)); - - /* minimum clock period for syncronous mode */ - of_property_read_u32(np, "gpmc,sync-clk-ps", &gpmc_t->sync_clk); - - /* chip select timtings */ - of_property_read_u32(np, "gpmc,cs-on-ns", &gpmc_t->cs_on); - of_property_read_u32(np, "gpmc,cs-rd-off-ns", &gpmc_t->cs_rd_off); - of_property_read_u32(np, "gpmc,cs-wr-off-ns", &gpmc_t->cs_wr_off); - - /* ADV signal timings */ - of_property_read_u32(np, "gpmc,adv-on-ns", &gpmc_t->adv_on); - of_property_read_u32(np, "gpmc,adv-rd-off-ns", &gpmc_t->adv_rd_off); - of_property_read_u32(np, "gpmc,adv-wr-off-ns", &gpmc_t->adv_wr_off); - - /* WE signal timings */ - of_property_read_u32(np, "gpmc,we-on-ns", &gpmc_t->we_on); - of_property_read_u32(np, "gpmc,we-off-ns", &gpmc_t->we_off); - - /* OE signal timings */ - of_property_read_u32(np, "gpmc,oe-on-ns", &gpmc_t->oe_on); - of_property_read_u32(np, "gpmc,oe-off-ns", &gpmc_t->oe_off); - - /* access and cycle timings */ - of_property_read_u32(np, "gpmc,page-burst-access-ns", - &gpmc_t->page_burst_access); - of_property_read_u32(np, "gpmc,access-ns", &gpmc_t->access); - of_property_read_u32(np, "gpmc,rd-cycle-ns", &gpmc_t->rd_cycle); - of_property_read_u32(np, "gpmc,wr-cycle-ns", &gpmc_t->wr_cycle); - of_property_read_u32(np, "gpmc,bus-turnaround-ns", - &gpmc_t->bus_turnaround); - of_property_read_u32(np, "gpmc,cycle2cycle-delay-ns", - &gpmc_t->cycle2cycle_delay); - of_property_read_u32(np, "gpmc,wait-monitoring-ns", - &gpmc_t->wait_monitoring); - of_property_read_u32(np, "gpmc,clk-activation-ns", - &gpmc_t->clk_activation); - - /* only applicable to OMAP3+ */ - of_property_read_u32(np, "gpmc,wr-access-ns", &gpmc_t->wr_access); - of_property_read_u32(np, "gpmc,wr-data-mux-bus-ns", - &gpmc_t->wr_data_mux_bus); - - /* bool timing parameters */ - p = &gpmc_t->bool_timings; - - p->cycle2cyclediffcsen = - of_property_read_bool(np, "gpmc,cycle2cycle-diffcsen"); - p->cycle2cyclesamecsen = - of_property_read_bool(np, "gpmc,cycle2cycle-samecsen"); - p->we_extra_delay = of_property_read_bool(np, "gpmc,we-extra-delay"); - p->oe_extra_delay = of_property_read_bool(np, "gpmc,oe-extra-delay"); - p->adv_extra_delay = of_property_read_bool(np, "gpmc,adv-extra-delay"); - p->cs_extra_delay = of_property_read_bool(np, "gpmc,cs-extra-delay"); - p->time_para_granularity = - of_property_read_bool(np, "gpmc,time-para-granularity"); -} - -#if IS_ENABLED(CONFIG_MTD_NAND) - -static const char * const nand_xfer_types[] = { - [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled", - [NAND_OMAP_POLLED] = "polled", - [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma", - [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq", -}; - -static int gpmc_probe_nand_child(struct platform_device *pdev, - struct device_node *child) -{ - u32 val; - const char *s; - struct gpmc_timings gpmc_t; - struct omap_nand_platform_data *gpmc_nand_data; - - if (of_property_read_u32(child, "reg", &val) < 0) { - dev_err(&pdev->dev, "%s has no 'reg' property\n", - child->full_name); - return -ENODEV; - } - - gpmc_nand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_nand_data), - GFP_KERNEL); - if (!gpmc_nand_data) - return -ENOMEM; - - gpmc_nand_data->cs = val; - gpmc_nand_data->of_node = child; - - /* Detect availability of ELM module */ - gpmc_nand_data->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0); - if (gpmc_nand_data->elm_of_node == NULL) - gpmc_nand_data->elm_of_node = - of_parse_phandle(child, "elm_id", 0); - if (gpmc_nand_data->elm_of_node == NULL) - pr_warn("%s: ti,elm-id property not found\n", __func__); - - /* select ecc-scheme for NAND */ - if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) { - pr_err("%s: ti,nand-ecc-opt not found\n", __func__); - return -ENODEV; - } - - if (!strcmp(s, "sw")) - gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_SW; - else if (!strcmp(s, "ham1") || - !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) - gpmc_nand_data->ecc_opt = - OMAP_ECC_HAM1_CODE_HW; - else if (!strcmp(s, "bch4")) - if (gpmc_nand_data->elm_of_node) - gpmc_nand_data->ecc_opt = - OMAP_ECC_BCH4_CODE_HW; - else - gpmc_nand_data->ecc_opt = - OMAP_ECC_BCH4_CODE_HW_DETECTION_SW; - else if (!strcmp(s, "bch8")) - if (gpmc_nand_data->elm_of_node) - gpmc_nand_data->ecc_opt = - OMAP_ECC_BCH8_CODE_HW; - else - gpmc_nand_data->ecc_opt = - OMAP_ECC_BCH8_CODE_HW_DETECTION_SW; - else if (!strcmp(s, "bch16")) - if (gpmc_nand_data->elm_of_node) - gpmc_nand_data->ecc_opt = - OMAP_ECC_BCH16_CODE_HW; - else - pr_err("%s: BCH16 requires ELM support\n", __func__); - else - pr_err("%s: ti,nand-ecc-opt invalid value\n", __func__); - - /* select data transfer mode for NAND controller */ - if (!of_property_read_string(child, "ti,nand-xfer-type", &s)) - for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++) - if (!strcasecmp(s, nand_xfer_types[val])) { - gpmc_nand_data->xfer_type = val; - break; - } - - gpmc_nand_data->flash_bbt = of_get_nand_on_flash_bbt(child); - - val = of_get_nand_bus_width(child); - if (val == 16) - gpmc_nand_data->devsize = NAND_BUSWIDTH_16; - - gpmc_read_timings_dt(child, &gpmc_t); - gpmc_nand_init(gpmc_nand_data, &gpmc_t); - - return 0; -} -#else -static int gpmc_probe_nand_child(struct platform_device *pdev, - struct device_node *child) -{ - return 0; -} -#endif - -#if IS_ENABLED(CONFIG_MTD_ONENAND) -static int gpmc_probe_onenand_child(struct platform_device *pdev, - struct device_node *child) -{ - u32 val; - struct omap_onenand_platform_data *gpmc_onenand_data; - - if (of_property_read_u32(child, "reg", &val) < 0) { - dev_err(&pdev->dev, "%s has no 'reg' property\n", - child->full_name); - return -ENODEV; - } - - gpmc_onenand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_onenand_data), - GFP_KERNEL); - if (!gpmc_onenand_data) - return -ENOMEM; - - gpmc_onenand_data->cs = val; - gpmc_onenand_data->of_node = child; - gpmc_onenand_data->dma_channel = -1; - - if (!of_property_read_u32(child, "dma-channel", &val)) - gpmc_onenand_data->dma_channel = val; - - gpmc_onenand_init(gpmc_onenand_data); - - return 0; -} -#else -static int gpmc_probe_onenand_child(struct platform_device *pdev, - struct device_node *child) -{ - return 0; -} -#endif - -/** - * gpmc_probe_generic_child - configures the gpmc for a child device - * @pdev: pointer to gpmc platform device - * @child: pointer to device-tree node for child device - * - * Allocates and configures a GPMC chip-select for a child device. - * Returns 0 on success and appropriate negative error code on failure. - */ -static int gpmc_probe_generic_child(struct platform_device *pdev, - struct device_node *child) -{ - struct gpmc_settings gpmc_s; - struct gpmc_timings gpmc_t; - struct resource res; - unsigned long base; - int ret, cs; - - if (of_property_read_u32(child, "reg", &cs) < 0) { - dev_err(&pdev->dev, "%s has no 'reg' property\n", - child->full_name); - return -ENODEV; - } - - if (of_address_to_resource(child, 0, &res) < 0) { - dev_err(&pdev->dev, "%s has malformed 'reg' property\n", - child->full_name); - return -ENODEV; - } - - ret = gpmc_cs_request(cs, resource_size(&res), &base); - if (ret < 0) { - dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs); - return ret; - } - - /* - * For some GPMC devices we still need to rely on the bootloader - * timings because the devices can be connected via FPGA. So far - * the list is smc91x on the omap2 SDP boards, and 8250 on zooms. - * REVISIT: Add timing support from slls644g.pdf and from the - * lan91c96 manual. - */ - if (of_device_is_compatible(child, "ns16550a") || - of_device_is_compatible(child, "smsc,lan91c94") || - of_device_is_compatible(child, "smsc,lan91c111")) { - dev_warn(&pdev->dev, - "%s using bootloader timings on CS%d\n", - child->name, cs); - goto no_timings; - } - - /* - * FIXME: gpmc_cs_request() will map the CS to an arbitary - * location in the gpmc address space. When booting with - * device-tree we want the NOR flash to be mapped to the - * location specified in the device-tree blob. So remap the - * CS to this location. Once DT migration is complete should - * just make gpmc_cs_request() map a specific address. - */ - ret = gpmc_cs_remap(cs, res.start); - if (ret < 0) { - dev_err(&pdev->dev, "cannot remap GPMC CS %d to %pa\n", - cs, &res.start); - goto err; - } - - gpmc_read_settings_dt(child, &gpmc_s); - - ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width); - if (ret < 0) - goto err; - - ret = gpmc_cs_program_settings(cs, &gpmc_s); - if (ret < 0) - goto err; - - gpmc_read_timings_dt(child, &gpmc_t); - gpmc_cs_set_timings(cs, &gpmc_t); - -no_timings: - if (of_platform_device_create(child, NULL, &pdev->dev)) - return 0; - - dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name); - ret = -ENODEV; - -err: - gpmc_cs_free(cs); - - return ret; -} - -static int gpmc_probe_dt(struct platform_device *pdev) -{ - int ret; - struct device_node *child; - const struct of_device_id *of_id = - of_match_device(gpmc_dt_ids, &pdev->dev); - - if (!of_id) - return 0; - - ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-cs", - &gpmc_cs_num); - if (ret < 0) { - pr_err("%s: number of chip-selects not defined\n", __func__); - return ret; - } else if (gpmc_cs_num < 1) { - pr_err("%s: all chip-selects are disabled\n", __func__); - return -EINVAL; - } else if (gpmc_cs_num > GPMC_CS_NUM) { - pr_err("%s: number of supported chip-selects cannot be > %d\n", - __func__, GPMC_CS_NUM); - return -EINVAL; - } - - ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins", - &gpmc_nr_waitpins); - if (ret < 0) { - pr_err("%s: number of wait pins not found!\n", __func__); - return ret; - } - - for_each_available_child_of_node(pdev->dev.of_node, child) { - - if (!child->name) - continue; - - if (of_node_cmp(child->name, "nand") == 0) - ret = gpmc_probe_nand_child(pdev, child); - else if (of_node_cmp(child->name, "onenand") == 0) - ret = gpmc_probe_onenand_child(pdev, child); - else if (of_node_cmp(child->name, "ethernet") == 0 || - of_node_cmp(child->name, "nor") == 0 || - of_node_cmp(child->name, "uart") == 0) - ret = gpmc_probe_generic_child(pdev, child); - - if (WARN(ret < 0, "%s: probing gpmc child %s failed\n", - __func__, child->full_name)) - of_node_put(child); - } - - return 0; -} -#else -static int gpmc_probe_dt(struct platform_device *pdev) -{ - return 0; -} -#endif - -static int gpmc_probe(struct platform_device *pdev) -{ - int rc; - u32 l; - struct resource *res; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) - return -ENOENT; - - phys_base = res->start; - mem_size = resource_size(res); - - gpmc_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(gpmc_base)) - return PTR_ERR(gpmc_base); - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (res == NULL) - dev_warn(&pdev->dev, "Failed to get resource: irq\n"); - else - gpmc_irq = res->start; - - gpmc_l3_clk = clk_get(&pdev->dev, "fck"); - if (IS_ERR(gpmc_l3_clk)) { - dev_err(&pdev->dev, "error: clk_get\n"); - gpmc_irq = 0; - return PTR_ERR(gpmc_l3_clk); - } - - pm_runtime_enable(&pdev->dev); - pm_runtime_get_sync(&pdev->dev); - - gpmc_dev = &pdev->dev; - - l = gpmc_read_reg(GPMC_REVISION); - - /* - * FIXME: Once device-tree migration is complete the below flags - * should be populated based upon the device-tree compatible - * string. For now just use the IP revision. OMAP3+ devices have - * the wr_access and wr_data_mux_bus register fields. OMAP4+ - * devices support the addr-addr-data multiplex protocol. - * - * GPMC IP revisions: - * - OMAP24xx = 2.0 - * - OMAP3xxx = 5.0 - * - OMAP44xx/54xx/AM335x = 6.0 - */ - if (GPMC_REVISION_MAJOR(l) > 0x4) - gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS; - if (GPMC_REVISION_MAJOR(l) > 0x5) - gpmc_capability |= GPMC_HAS_MUX_AAD; - dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l), - GPMC_REVISION_MINOR(l)); - - gpmc_mem_init(); - - if (gpmc_setup_irq() < 0) - dev_warn(gpmc_dev, "gpmc_setup_irq failed\n"); - - /* Now the GPMC is initialised, unreserve the chip-selects */ - gpmc_cs_map = 0; - - if (!pdev->dev.of_node) { - gpmc_cs_num = GPMC_CS_NUM; - gpmc_nr_waitpins = GPMC_NR_WAITPINS; - } - - rc = gpmc_probe_dt(pdev); - if (rc < 0) { - pm_runtime_put_sync(&pdev->dev); - clk_put(gpmc_l3_clk); - dev_err(gpmc_dev, "failed to probe DT parameters\n"); - return rc; - } - - return 0; -} - -static int gpmc_remove(struct platform_device *pdev) -{ - gpmc_free_irq(); - gpmc_mem_exit(); - pm_runtime_put_sync(&pdev->dev); - pm_runtime_disable(&pdev->dev); - gpmc_dev = NULL; - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int gpmc_suspend(struct device *dev) -{ - omap3_gpmc_save_context(); - pm_runtime_put_sync(dev); - return 0; -} - -static int gpmc_resume(struct device *dev) -{ - pm_runtime_get_sync(dev); - omap3_gpmc_restore_context(); - return 0; -} -#endif - -static SIMPLE_DEV_PM_OPS(gpmc_pm_ops, gpmc_suspend, gpmc_resume); - -static struct platform_driver gpmc_driver = { - .probe = gpmc_probe, - .remove = gpmc_remove, - .driver = { - .name = DEVICE_NAME, - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(gpmc_dt_ids), - .pm = &gpmc_pm_ops, - }, -}; - -static __init int gpmc_init(void) -{ - return platform_driver_register(&gpmc_driver); -} - -static __exit void gpmc_exit(void) -{ - platform_driver_unregister(&gpmc_driver); - -} - -omap_postcore_initcall(gpmc_init); -module_exit(gpmc_exit); - -static int __init omap_gpmc_init(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - char *oh_name = "gpmc"; - - /* - * if the board boots up with a populated DT, do not - * manually add the device from this initcall - */ - if (of_have_populated_dt()) - return -ENODEV; - - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - return -ENODEV; - } - - pdev = omap_device_build(DEVICE_NAME, -1, oh, NULL, 0); - WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); - - return PTR_RET(pdev); -} -omap_postcore_initcall(omap_gpmc_init); - -static irqreturn_t gpmc_handle_irq(int irq, void *dev) -{ - int i; - u32 regval; - - regval = gpmc_read_reg(GPMC_IRQSTATUS); - - if (!regval) - return IRQ_NONE; - - for (i = 0; i < GPMC_NR_IRQ; i++) - if (regval & gpmc_client_irq[i].bitmask) - generic_handle_irq(gpmc_client_irq[i].irq); - - gpmc_write_reg(GPMC_IRQSTATUS, regval); - - return IRQ_HANDLED; -} - -static struct omap3_gpmc_regs gpmc_context; - -void omap3_gpmc_save_context(void) -{ - int i; - - gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG); - gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE); - gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL); - gpmc_context.config = gpmc_read_reg(GPMC_CONFIG); - gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1); - gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2); - gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL); - for (i = 0; i < gpmc_cs_num; i++) { - gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i); - if (gpmc_context.cs_context[i].is_valid) { - gpmc_context.cs_context[i].config1 = - gpmc_cs_read_reg(i, GPMC_CS_CONFIG1); - gpmc_context.cs_context[i].config2 = - gpmc_cs_read_reg(i, GPMC_CS_CONFIG2); - gpmc_context.cs_context[i].config3 = - gpmc_cs_read_reg(i, GPMC_CS_CONFIG3); - gpmc_context.cs_context[i].config4 = - gpmc_cs_read_reg(i, GPMC_CS_CONFIG4); - gpmc_context.cs_context[i].config5 = - gpmc_cs_read_reg(i, GPMC_CS_CONFIG5); - gpmc_context.cs_context[i].config6 = - gpmc_cs_read_reg(i, GPMC_CS_CONFIG6); - gpmc_context.cs_context[i].config7 = - gpmc_cs_read_reg(i, GPMC_CS_CONFIG7); - } - } -} - -void omap3_gpmc_restore_context(void) -{ - int i; - - gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig); - gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable); - gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl); - gpmc_write_reg(GPMC_CONFIG, gpmc_context.config); - gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1); - gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2); - gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control); - for (i = 0; i < gpmc_cs_num; i++) { - if (gpmc_context.cs_context[i].is_valid) { - gpmc_cs_write_reg(i, GPMC_CS_CONFIG1, - gpmc_context.cs_context[i].config1); - gpmc_cs_write_reg(i, GPMC_CS_CONFIG2, - gpmc_context.cs_context[i].config2); - gpmc_cs_write_reg(i, GPMC_CS_CONFIG3, - gpmc_context.cs_context[i].config3); - gpmc_cs_write_reg(i, GPMC_CS_CONFIG4, - gpmc_context.cs_context[i].config4); - gpmc_cs_write_reg(i, GPMC_CS_CONFIG5, - gpmc_context.cs_context[i].config5); - gpmc_cs_write_reg(i, GPMC_CS_CONFIG6, - gpmc_context.cs_context[i].config6); - gpmc_cs_write_reg(i, GPMC_CS_CONFIG7, - gpmc_context.cs_context[i].config7); - } - } -} diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h index 707f6d58edd5..9caa41a6cb04 100644 --- a/arch/arm/mach-omap2/gpmc.h +++ b/arch/arm/mach-omap2/gpmc.h @@ -6,226 +6,9 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * Do not include this file in any new code, this will get removed + * once omap3 boots in device tree only mode. + * */ - -#ifndef __OMAP2_GPMC_H -#define __OMAP2_GPMC_H - -#include <linux/platform_data/mtd-nand-omap2.h> - -/* Maximum Number of Chip Selects */ -#define GPMC_CS_NUM 8 - -#define GPMC_CS_CONFIG1 0x00 -#define GPMC_CS_CONFIG2 0x04 -#define GPMC_CS_CONFIG3 0x08 -#define GPMC_CS_CONFIG4 0x0c -#define GPMC_CS_CONFIG5 0x10 -#define GPMC_CS_CONFIG6 0x14 -#define GPMC_CS_CONFIG7 0x18 -#define GPMC_CS_NAND_COMMAND 0x1c -#define GPMC_CS_NAND_ADDRESS 0x20 -#define GPMC_CS_NAND_DATA 0x24 - -/* Control Commands */ -#define GPMC_CONFIG_RDY_BSY 0x00000001 -#define GPMC_CONFIG_DEV_SIZE 0x00000002 -#define GPMC_CONFIG_DEV_TYPE 0x00000003 -#define GPMC_SET_IRQ_STATUS 0x00000004 -#define GPMC_CONFIG_WP 0x00000005 - -#define GPMC_ENABLE_IRQ 0x0000000d - -/* ECC commands */ -#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */ -#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */ -#define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */ - -#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) -#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) -#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29) -#define GPMC_CONFIG1_READTYPE_SYNC (1 << 29) -#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28) -#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27) -#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27) -#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25) -#define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23) -#define GPMC_CONFIG1_WAIT_READ_MON (1 << 22) -#define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21) -#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18) -#define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16) -#define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12) -#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) -#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) -#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8) -#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) -#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) -#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) -#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2)) -#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3)) -#define GPMC_CONFIG7_CSVALID (1 << 6) - -#define GPMC_DEVICETYPE_NOR 0 -#define GPMC_DEVICETYPE_NAND 2 -#define GPMC_CONFIG_WRITEPROTECT 0x00000010 -#define WR_RD_PIN_MONITORING 0x00600000 -#define GPMC_IRQ_FIFOEVENTENABLE 0x01 -#define GPMC_IRQ_COUNT_EVENT 0x02 - -#define GPMC_BURST_4 4 /* 4 word burst */ -#define GPMC_BURST_8 8 /* 8 word burst */ -#define GPMC_BURST_16 16 /* 16 word burst */ -#define GPMC_DEVWIDTH_8BIT 1 /* 8-bit device width */ -#define GPMC_DEVWIDTH_16BIT 2 /* 16-bit device width */ -#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */ -#define GPMC_MUX_AD 2 /* Addr-Data multiplex */ - -/* bool type time settings */ -struct gpmc_bool_timings { - bool cycle2cyclediffcsen; - bool cycle2cyclesamecsen; - bool we_extra_delay; - bool oe_extra_delay; - bool adv_extra_delay; - bool cs_extra_delay; - bool time_para_granularity; -}; - -/* - * Note that all values in this struct are in nanoseconds except sync_clk - * (which is in picoseconds), while the register values are in gpmc_fck cycles. - */ -struct gpmc_timings { - /* Minimum clock period for synchronous mode (in picoseconds) */ - u32 sync_clk; - - /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */ - u32 cs_on; /* Assertion time */ - u32 cs_rd_off; /* Read deassertion time */ - u32 cs_wr_off; /* Write deassertion time */ - - /* ADV signal timings corresponding to GPMC_CONFIG3 */ - u32 adv_on; /* Assertion time */ - u32 adv_rd_off; /* Read deassertion time */ - u32 adv_wr_off; /* Write deassertion time */ - - /* WE signals timings corresponding to GPMC_CONFIG4 */ - u32 we_on; /* WE assertion time */ - u32 we_off; /* WE deassertion time */ - - /* OE signals timings corresponding to GPMC_CONFIG4 */ - u32 oe_on; /* OE assertion time */ - u32 oe_off; /* OE deassertion time */ - - /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */ - u32 page_burst_access; /* Multiple access word delay */ - u32 access; /* Start-cycle to first data valid delay */ - u32 rd_cycle; /* Total read cycle time */ - u32 wr_cycle; /* Total write cycle time */ - - u32 bus_turnaround; - u32 cycle2cycle_delay; - - u32 wait_monitoring; - u32 clk_activation; - - /* The following are only on OMAP3430 */ - u32 wr_access; /* WRACCESSTIME */ - u32 wr_data_mux_bus; /* WRDATAONADMUXBUS */ - - struct gpmc_bool_timings bool_timings; -}; - -/* Device timings in picoseconds */ -struct gpmc_device_timings { - u32 t_ceasu; /* address setup to CS valid */ - u32 t_avdasu; /* address setup to ADV valid */ - /* XXX: try to combine t_avdp_r & t_avdp_w. Issue is - * of tusb using these timings even for sync whilst - * ideally for adv_rd/(wr)_off it should have considered - * t_avdh instead. This indirectly necessitates r/w - * variations of t_avdp as it is possible to have one - * sync & other async - */ - u32 t_avdp_r; /* ADV low time (what about t_cer ?) */ - u32 t_avdp_w; - u32 t_aavdh; /* address hold time */ - u32 t_oeasu; /* address setup to OE valid */ - u32 t_aa; /* access time from ADV assertion */ - u32 t_iaa; /* initial access time */ - u32 t_oe; /* access time from OE assertion */ - u32 t_ce; /* access time from CS asertion */ - u32 t_rd_cycle; /* read cycle time */ - u32 t_cez_r; /* read CS deassertion to high Z */ - u32 t_cez_w; /* write CS deassertion to high Z */ - u32 t_oez; /* OE deassertion to high Z */ - u32 t_weasu; /* address setup to WE valid */ - u32 t_wpl; /* write assertion time */ - u32 t_wph; /* write deassertion time */ - u32 t_wr_cycle; /* write cycle time */ - - u32 clk; - u32 t_bacc; /* burst access valid clock to output delay */ - u32 t_ces; /* CS setup time to clk */ - u32 t_avds; /* ADV setup time to clk */ - u32 t_avdh; /* ADV hold time from clk */ - u32 t_ach; /* address hold time from clk */ - u32 t_rdyo; /* clk to ready valid */ - - u32 t_ce_rdyz; /* XXX: description ?, or use t_cez instead */ - u32 t_ce_avd; /* CS on to ADV on delay */ - - /* XXX: check the possibility of combining - * cyc_aavhd_oe & cyc_aavdh_we - */ - u8 cyc_aavdh_oe;/* read address hold time in cycles */ - u8 cyc_aavdh_we;/* write address hold time in cycles */ - u8 cyc_oe; /* access time from OE assertion in cycles */ - u8 cyc_wpl; /* write deassertion time in cycles */ - u32 cyc_iaa; /* initial access time in cycles */ - - /* extra delays */ - bool ce_xdelay; - bool avd_xdelay; - bool oe_xdelay; - bool we_xdelay; -}; - -struct gpmc_settings { - bool burst_wrap; /* enables wrap bursting */ - bool burst_read; /* enables read page/burst mode */ - bool burst_write; /* enables write page/burst mode */ - bool device_nand; /* device is NAND */ - bool sync_read; /* enables synchronous reads */ - bool sync_write; /* enables synchronous writes */ - bool wait_on_read; /* monitor wait on reads */ - bool wait_on_write; /* monitor wait on writes */ - u32 burst_len; /* page/burst length */ - u32 device_width; /* device bus width (8 or 16 bit) */ - u32 mux_add_data; /* multiplex address & data */ - u32 wait_pin; /* wait-pin to be used */ -}; - -extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t, - struct gpmc_settings *gpmc_s, - struct gpmc_device_timings *dev_t); - -extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); -extern int gpmc_get_client_irq(unsigned irq_config); - -extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); - -extern void gpmc_cs_write_reg(int cs, int idx, u32 val); -extern int gpmc_calc_divider(unsigned int sync_clk); -extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); -extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p); -extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); -extern void gpmc_cs_free(int cs); -extern void omap3_gpmc_save_context(void); -extern void omap3_gpmc_restore_context(void); -extern int gpmc_configure(int cmd, int wval); -extern void gpmc_read_settings_dt(struct device_node *np, - struct gpmc_settings *p); - -#endif +#include <linux/omap-gpmc.h> diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 07d4c7b35754..dc6e79c4484a 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -14,14 +14,15 @@ #include <linux/string.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/mmc/host.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/hsmmc-omap.h> #include "soc.h" #include "omap_device.h" #include "omap-pm.h" #include "mux.h" -#include "mmc.h" #include "hsmmc.h" #include "control.h" @@ -32,25 +33,14 @@ static u16 control_devconf1_offset; #define HSMMC_NAME_LEN 9 -#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) - -static int hsmmc_get_context_loss(struct device *dev) -{ - return omap_pm_get_dev_context_loss_count(dev); -} - -#else -#define hsmmc_get_context_loss NULL -#endif - -static void omap_hsmmc1_before_set_reg(struct device *dev, int slot, - int power_on, int vdd) +static void omap_hsmmc1_before_set_reg(struct device *dev, + int power_on, int vdd) { u32 reg, prog_io; - struct omap_mmc_platform_data *mmc = dev->platform_data; + struct omap_hsmmc_platform_data *mmc = dev->platform_data; - if (mmc->slots[0].remux) - mmc->slots[0].remux(dev, slot, power_on); + if (mmc->remux) + mmc->remux(dev, power_on); /* * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the @@ -72,7 +62,7 @@ static void omap_hsmmc1_before_set_reg(struct device *dev, int slot, omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1); } - if (mmc->slots[0].internal_clock) { + if (mmc->internal_clock) { reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); reg |= OMAP2_MMCSDIO1ADPCLKISEL; omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0); @@ -96,8 +86,7 @@ static void omap_hsmmc1_before_set_reg(struct device *dev, int slot, } } -static void omap_hsmmc1_after_set_reg(struct device *dev, int slot, - int power_on, int vdd) +static void omap_hsmmc1_after_set_reg(struct device *dev, int power_on, int vdd) { u32 reg; @@ -120,34 +109,32 @@ static void omap_hsmmc1_after_set_reg(struct device *dev, int slot, } } -static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc) +static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc) { u32 reg; reg = omap_ctrl_readl(control_devconf1_offset); - if (mmc->slots[0].internal_clock) + if (mmc->internal_clock) reg |= OMAP2_MMCSDIO2ADPCLKISEL; else reg &= ~OMAP2_MMCSDIO2ADPCLKISEL; omap_ctrl_writel(reg, control_devconf1_offset); } -static void hsmmc2_before_set_reg(struct device *dev, int slot, - int power_on, int vdd) +static void hsmmc2_before_set_reg(struct device *dev, int power_on, int vdd) { - struct omap_mmc_platform_data *mmc = dev->platform_data; + struct omap_hsmmc_platform_data *mmc = dev->platform_data; - if (mmc->slots[0].remux) - mmc->slots[0].remux(dev, slot, power_on); + if (mmc->remux) + mmc->remux(dev, power_on); if (power_on) hsmmc2_select_input_clk_src(mmc); } -static int am35x_hsmmc2_set_power(struct device *dev, int slot, - int power_on, int vdd) +static int am35x_hsmmc2_set_power(struct device *dev, int power_on, int vdd) { - struct omap_mmc_platform_data *mmc = dev->platform_data; + struct omap_hsmmc_platform_data *mmc = dev->platform_data; if (power_on) hsmmc2_select_input_clk_src(mmc); @@ -155,23 +142,22 @@ static int am35x_hsmmc2_set_power(struct device *dev, int slot, return 0; } -static int nop_mmc_set_power(struct device *dev, int slot, int power_on, - int vdd) +static int nop_mmc_set_power(struct device *dev, int power_on, int vdd) { return 0; } -static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, - int controller_nr) +static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data + *mmc_controller, int controller_nr) { - if (gpio_is_valid(mmc_controller->slots[0].switch_pin) && - (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, - OMAP_PIN_INPUT_PULLUP); - if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) && - (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, - OMAP_PIN_INPUT_PULLUP); + if (gpio_is_valid(mmc_controller->switch_pin) && + (mmc_controller->switch_pin < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->switch_pin, + OMAP_PIN_INPUT_PULLUP); + if (gpio_is_valid(mmc_controller->gpio_wp) && + (mmc_controller->gpio_wp < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->gpio_wp, + OMAP_PIN_INPUT_PULLUP); if (cpu_is_omap34xx()) { if (controller_nr == 0) { omap_mux_init_signal("sdmmc1_clk", @@ -180,7 +166,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc1_dat0", OMAP_PIN_INPUT_PULLUP); - if (mmc_controller->slots[0].caps & + if (mmc_controller->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { omap_mux_init_signal("sdmmc1_dat1", OMAP_PIN_INPUT_PULLUP); @@ -189,7 +175,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, omap_mux_init_signal("sdmmc1_dat3", OMAP_PIN_INPUT_PULLUP); } - if (mmc_controller->slots[0].caps & + if (mmc_controller->caps & MMC_CAP_8_BIT_DATA) { omap_mux_init_signal("sdmmc1_dat4", OMAP_PIN_INPUT_PULLUP); @@ -214,7 +200,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, * For 8 wire configurations, Lines DAT4, 5, 6 and 7 * need to be muxed in the board-*.c files */ - if (mmc_controller->slots[0].caps & + if (mmc_controller->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { omap_mux_init_signal("sdmmc2_dat1", OMAP_PIN_INPUT_PULLUP); @@ -223,7 +209,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, omap_mux_init_signal("sdmmc2_dat3", OMAP_PIN_INPUT_PULLUP); } - if (mmc_controller->slots[0].caps & + if (mmc_controller->caps & MMC_CAP_8_BIT_DATA) { omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", OMAP_PIN_INPUT_PULLUP); @@ -243,7 +229,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, } static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, - struct omap_mmc_platform_data *mmc) + struct omap_hsmmc_platform_data *mmc) { char *hc_name; @@ -259,38 +245,22 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, else snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", c->mmc, 1); - mmc->slots[0].name = hc_name; - mmc->nr_slots = 1; - mmc->slots[0].caps = c->caps; - mmc->slots[0].pm_caps = c->pm_caps; - mmc->slots[0].internal_clock = !c->ext_clock; - mmc->max_freq = c->max_freq; + mmc->name = hc_name; + mmc->caps = c->caps; + mmc->internal_clock = !c->ext_clock; mmc->reg_offset = 0; - mmc->get_context_loss_count = hsmmc_get_context_loss; - mmc->slots[0].switch_pin = c->gpio_cd; - mmc->slots[0].gpio_wp = c->gpio_wp; + mmc->switch_pin = c->gpio_cd; + mmc->gpio_wp = c->gpio_wp; - mmc->slots[0].remux = c->remux; - mmc->slots[0].init_card = c->init_card; + mmc->remux = c->remux; + mmc->init_card = c->init_card; if (c->cover_only) - mmc->slots[0].cover = 1; + mmc->cover = 1; if (c->nonremovable) - mmc->slots[0].nonremovable = 1; - - if (c->power_saving) - mmc->slots[0].power_saving = 1; - - if (c->no_off) - mmc->slots[0].no_off = 1; - - if (c->no_off_init) - mmc->slots[0].no_regulator_off_init = c->no_off_init; - - if (c->vcc_aux_disable_is_sleep) - mmc->slots[0].vcc_aux_disable_is_sleep = 1; + mmc->nonremovable = 1; /* * NOTE: MMC slots should have a Vcc regulator set up. @@ -300,42 +270,42 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, * temporary HACK: ocr_mask instead of fixed supply */ if (soc_is_am35xx()) - mmc->slots[0].ocr_mask = MMC_VDD_165_195 | + mmc->ocr_mask = MMC_VDD_165_195 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32; else - mmc->slots[0].ocr_mask = c->ocr_mask; + mmc->ocr_mask = c->ocr_mask; if (!soc_is_am35xx()) - mmc->slots[0].features |= HSMMC_HAS_PBIAS; + mmc->features |= HSMMC_HAS_PBIAS; switch (c->mmc) { case 1: - if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { + if (mmc->features & HSMMC_HAS_PBIAS) { /* on-chip level shifting via PBIAS0/PBIAS1 */ - mmc->slots[0].before_set_reg = + mmc->before_set_reg = omap_hsmmc1_before_set_reg; - mmc->slots[0].after_set_reg = + mmc->after_set_reg = omap_hsmmc1_after_set_reg; } if (soc_is_am35xx()) - mmc->slots[0].set_power = nop_mmc_set_power; + mmc->set_power = nop_mmc_set_power; /* OMAP3630 HSMMC1 supports only 4-bit */ if (cpu_is_omap3630() && (c->caps & MMC_CAP_8_BIT_DATA)) { c->caps &= ~MMC_CAP_8_BIT_DATA; c->caps |= MMC_CAP_4_BIT_DATA; - mmc->slots[0].caps = c->caps; + mmc->caps = c->caps; } break; case 2: if (soc_is_am35xx()) - mmc->slots[0].set_power = am35x_hsmmc2_set_power; + mmc->set_power = am35x_hsmmc2_set_power; if (c->ext_clock) c->transceiver = 1; @@ -343,17 +313,17 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, c->caps &= ~MMC_CAP_8_BIT_DATA; c->caps |= MMC_CAP_4_BIT_DATA; } - if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { + if (mmc->features & HSMMC_HAS_PBIAS) { /* off-chip level shifting, or none */ - mmc->slots[0].before_set_reg = hsmmc2_before_set_reg; - mmc->slots[0].after_set_reg = NULL; + mmc->before_set_reg = hsmmc2_before_set_reg; + mmc->after_set_reg = NULL; } break; case 3: case 4: case 5: - mmc->slots[0].before_set_reg = NULL; - mmc->slots[0].after_set_reg = NULL; + mmc->before_set_reg = NULL; + mmc->after_set_reg = NULL; break; default: pr_err("MMC%d configuration not supported!\n", c->mmc); @@ -368,7 +338,7 @@ static int omap_hsmmc_done; void omap_hsmmc_late_init(struct omap2_hsmmc_info *c) { struct platform_device *pdev; - struct omap_mmc_platform_data *mmc_pdata; + struct omap_hsmmc_platform_data *mmc_pdata; int res; if (omap_hsmmc_done != 1) @@ -388,8 +358,8 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c) if (!mmc_pdata) continue; - mmc_pdata->slots[0].switch_pin = c->gpio_cd; - mmc_pdata->slots[0].gpio_wp = c->gpio_wp; + mmc_pdata->switch_pin = c->gpio_cd; + mmc_pdata->gpio_wp = c->gpio_wp; res = omap_device_register(pdev); if (res) @@ -408,12 +378,12 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, struct omap_device *od; struct platform_device *pdev; char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN]; - struct omap_mmc_platform_data *mmc_data; - struct omap_mmc_dev_attr *mmc_dev_attr; + struct omap_hsmmc_platform_data *mmc_data; + struct omap_hsmmc_dev_attr *mmc_dev_attr; char *name; int res; - mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL); + mmc_data = kzalloc(sizeof(*mmc_data), GFP_KERNEL); if (!mmc_data) { pr_err("Cannot allocate memory for mmc device!\n"); return; @@ -463,7 +433,7 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, } res = platform_device_add_data(pdev, mmc_data, - sizeof(struct omap_mmc_platform_data)); + sizeof(struct omap_hsmmc_platform_data)); if (res) { pr_err("Could not add pdata for %s\n", name); goto put_pdev; @@ -489,7 +459,7 @@ put_pdev: platform_device_put(pdev); free_name: - kfree(mmc_data->slots[0].name); + kfree(mmc_data->name); free_mmc: kfree(mmc_data); diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index 7f2e790e0929..148cd9b15499 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -12,25 +12,18 @@ struct omap2_hsmmc_info { u8 mmc; /* controller 1/2/3 */ u32 caps; /* 4/8 wires and any additional host * capabilities OR'd (ref. linux/mmc/host.h) */ - u32 pm_caps; /* PM capabilities */ bool transceiver; /* MMC-2 option */ bool ext_clock; /* use external pin for input clock */ bool cover_only; /* No card detect - just cover switch */ bool nonremovable; /* Nonremovable e.g. eMMC */ - bool power_saving; /* Try to sleep or power off when possible */ - bool no_off; /* power_saving and power is not to go off */ - bool no_off_init; /* no power off when not in MMC sleep state */ - bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */ bool deferred; /* mmc needs a deferred probe */ int gpio_cd; /* or -EINVAL */ int gpio_wp; /* or -EINVAL */ char *name; /* or NULL for default */ struct platform_device *pdev; /* mmc controller instance */ int ocr_mask; /* temporary HACK */ - int max_freq; /* maximum clock, if constrained by external - * circuitry, or 0 for default */ /* Remux (pad configuration) when powering on/off */ - void (*remux)(struct device *dev, int slot, int power_on); + void (*remux)(struct device *dev, int power_on); /* init some special card */ void (*init_card)(struct mmc_card *card); }; diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 03cbb16898a3..4fc838354e31 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -45,13 +45,15 @@ #include "sram.h" #include "cm2xxx.h" #include "cm3xxx.h" +#include "cm33xx.h" +#include "cm44xx.h" #include "prm.h" #include "cm.h" #include "prcm_mpu44xx.h" #include "prminst44xx.h" -#include "cminst44xx.h" #include "prm2xxx.h" #include "prm3xxx.h" +#include "prm33xx.h" #include "prm44xx.h" #include "opp2xxx.h" @@ -565,6 +567,8 @@ void __init am33xx_init_early(void) omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL); omap3xxx_check_revision(); am33xx_check_features(); + am33xx_prm_init(); + am33xx_cm_init(); am33xx_powerdomains_init(); am33xx_clockdomains_init(); am33xx_hwmod_init(); @@ -591,6 +595,8 @@ void __init am43xx_init_early(void) omap_cm_base_init(); omap3xxx_check_revision(); am33xx_check_features(); + omap44xx_prm_init(); + omap4_cm_init(); am43xx_powerdomains_init(); am43xx_clockdomains_init(); am43xx_hwmod_init(); @@ -620,6 +626,7 @@ void __init omap4430_init_early(void) omap_cm_base_init(); omap4xxx_check_revision(); omap4xxx_check_features(); + omap4_cm_init(); omap4_pm_init_early(); omap44xx_prm_init(); omap44xx_voltagedomains_init(); @@ -655,6 +662,7 @@ void __init omap5_init_early(void) omap_cm_base_init(); omap44xx_prm_init(); omap5xxx_check_revision(); + omap4_cm_init(); omap54xx_voltagedomains_init(); omap54xx_powerdomains_init(); omap54xx_clockdomains_init(); @@ -686,6 +694,7 @@ void __init dra7xx_init_early(void) omap_cm_base_init(); omap44xx_prm_init(); dra7xxx_check_revision(); + omap4_cm_init(); dra7xx_powerdomains_init(); dra7xx_clockdomains_init(); dra7xx_hwmod_init(); diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h index 0cd4b089da9c..30d39b97e7dd 100644 --- a/arch/arm/mach-omap2/mmc.h +++ b/arch/arm/mach-omap2/mmc.h @@ -1,5 +1,3 @@ -#include <linux/mmc/host.h> -#include <linux/platform_data/mmc-omap.h> #define OMAP24XX_NR_MMC 2 #define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE @@ -7,14 +5,6 @@ #define OMAP4_MMC_REG_OFFSET 0x100 -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) -void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); -#else -static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) -{ -} -#endif - struct omap_hwmod; int omap_msdi_reset(struct omap_hwmod *oh); diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 6944ae3674e8..79f49d904a06 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -227,7 +227,7 @@ static void __init save_l2x0_context(void) int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) { struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu); - unsigned int save_state = 0; + unsigned int save_state = 0, cpu_logic_state = PWRDM_POWER_RET; unsigned int wakeup_cpu; if (omap_rev() == OMAP4430_REV_ES1_0) @@ -239,6 +239,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) save_state = 0; break; case PWRDM_POWER_OFF: + cpu_logic_state = PWRDM_POWER_OFF; save_state = 1; break; case PWRDM_POWER_RET: @@ -270,6 +271,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) cpu_clear_prev_logic_pwrst(cpu); pwrdm_set_next_pwrst(pm_info->pwrdm, power_state); + pwrdm_set_logic_retst(pm_info->pwrdm, cpu_logic_state); set_cpu_wakeup_addr(cpu, virt_to_phys(omap_pm_ops.resume)); omap_pm_ops.scu_prepare(cpu, power_state); l2x0_pwrst_prepare(cpu, save_state); diff --git a/arch/arm/mach-omap2/omap2-restart.c b/arch/arm/mach-omap2/omap2-restart.c index 68423e26399d..d937b2e4040b 100644 --- a/arch/arm/mach-omap2/omap2-restart.c +++ b/arch/arm/mach-omap2/omap2-restart.c @@ -15,7 +15,7 @@ #include "soc.h" #include "common.h" -#include "prm2xxx.h" +#include "prm.h" /* * reset_virt_prcm_set_ck, reset_sys_ck: pointers to the virt_prcm_set @@ -40,8 +40,7 @@ void omap2xxx_restart(enum reboot_mode mode, const char *cmd) /* XXX Should save the cmd argument for use after the reboot */ - omap2xxx_prm_dpll_reset(); /* never returns */ - while (1); + omap_prm_reset_system(); } /** diff --git a/arch/arm/mach-omap2/omap3-restart.c b/arch/arm/mach-omap2/omap3-restart.c index 5de2a0c2979d..103a49f68bcb 100644 --- a/arch/arm/mach-omap2/omap3-restart.c +++ b/arch/arm/mach-omap2/omap3-restart.c @@ -14,10 +14,8 @@ #include <linux/init.h> #include <linux/reboot.h> -#include "iomap.h" -#include "common.h" #include "control.h" -#include "prm3xxx.h" +#include "prm.h" /* Global address base setup code */ @@ -32,6 +30,5 @@ void omap3xxx_restart(enum reboot_mode mode, const char *cmd) { omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0)); - omap3xxx_prm_dpll3_reset(); /* never returns */ - while (1); + omap_prm_reset_system(); } diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 16b20cedc38d..b7cb44abe49b 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -36,7 +36,6 @@ #include "soc.h" #include "iomap.h" #include "common.h" -#include "mmc.h" #include "prminst44xx.h" #include "prcm_mpu44xx.h" #include "omap4-sar-layout.h" diff --git a/arch/arm/mach-omap2/omap4-restart.c b/arch/arm/mach-omap2/omap4-restart.c index 41dfd7da8170..a99e7f7fb5be 100644 --- a/arch/arm/mach-omap2/omap4-restart.c +++ b/arch/arm/mach-omap2/omap4-restart.c @@ -9,7 +9,7 @@ #include <linux/types.h> #include <linux/reboot.h> -#include "prminst44xx.h" +#include "prm.h" /** * omap44xx_restart - trigger a software restart of the SoC @@ -22,7 +22,5 @@ void omap44xx_restart(enum reboot_mode mode, const char *cmd) { /* XXX Should save 'cmd' into scratchpad for use after reboot */ - omap4_prminst_global_warm_sw_reset(); /* never returns */ - while (1) - ; + omap_prm_reset_system(); } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 716247ed9e0c..cbb908dc5cf0 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -153,7 +153,6 @@ #include "powerdomain.h" #include "cm2xxx.h" #include "cm3xxx.h" -#include "cminst44xx.h" #include "cm33xx.h" #include "prm.h" #include "prm3xxx.h" @@ -979,31 +978,9 @@ static void _omap4_enable_module(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: %s: %d\n", oh->name, __func__, oh->prcm.omap4.modulemode); - omap4_cminst_module_enable(oh->prcm.omap4.modulemode, - oh->clkdm->prcm_partition, - oh->clkdm->cm_inst, - oh->clkdm->clkdm_offs, - oh->prcm.omap4.clkctrl_offs); -} - -/** - * _am33xx_enable_module - enable CLKCTRL modulemode on AM33XX - * @oh: struct omap_hwmod * - * - * Enables the PRCM module mode related to the hwmod @oh. - * No return value. - */ -static void _am33xx_enable_module(struct omap_hwmod *oh) -{ - if (!oh->clkdm || !oh->prcm.omap4.modulemode) - return; - - pr_debug("omap_hwmod: %s: %s: %d\n", - oh->name, __func__, oh->prcm.omap4.modulemode); - - am33xx_cm_module_enable(oh->prcm.omap4.modulemode, oh->clkdm->cm_inst, - oh->clkdm->clkdm_offs, - oh->prcm.omap4.clkctrl_offs); + omap_cm_module_enable(oh->prcm.omap4.modulemode, + oh->clkdm->prcm_partition, + oh->clkdm->cm_inst, oh->prcm.omap4.clkctrl_offs); } /** @@ -1026,35 +1003,9 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh) if (oh->flags & HWMOD_NO_IDLEST) return 0; - return omap4_cminst_wait_module_idle(oh->clkdm->prcm_partition, - oh->clkdm->cm_inst, - oh->clkdm->clkdm_offs, - oh->prcm.omap4.clkctrl_offs); -} - -/** - * _am33xx_wait_target_disable - wait for a module to be disabled on AM33XX - * @oh: struct omap_hwmod * - * - * Wait for a module @oh to enter slave idle. Returns 0 if the module - * does not have an IDLEST bit or if the module successfully enters - * slave idle; otherwise, pass along the return value of the - * appropriate *_cm*_wait_module_idle() function. - */ -static int _am33xx_wait_target_disable(struct omap_hwmod *oh) -{ - if (!oh) - return -EINVAL; - - if (oh->_int_flags & _HWMOD_NO_MPU_PORT) - return 0; - - if (oh->flags & HWMOD_NO_IDLEST) - return 0; - - return am33xx_cm_wait_module_idle(oh->clkdm->cm_inst, - oh->clkdm->clkdm_offs, - oh->prcm.omap4.clkctrl_offs); + return omap_cm_wait_module_idle(oh->clkdm->prcm_partition, + oh->clkdm->cm_inst, + oh->prcm.omap4.clkctrl_offs, 0); } /** @@ -1859,10 +1810,8 @@ static int _omap4_disable_module(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__); - omap4_cminst_module_disable(oh->clkdm->prcm_partition, - oh->clkdm->cm_inst, - oh->clkdm->clkdm_offs, - oh->prcm.omap4.clkctrl_offs); + omap_cm_module_disable(oh->clkdm->prcm_partition, oh->clkdm->cm_inst, + oh->prcm.omap4.clkctrl_offs); v = _omap4_wait_target_disable(oh); if (v) @@ -1873,36 +1822,6 @@ static int _omap4_disable_module(struct omap_hwmod *oh) } /** - * _am33xx_disable_module - enable CLKCTRL modulemode on AM33XX - * @oh: struct omap_hwmod * - * - * Disable the PRCM module mode related to the hwmod @oh. - * Return EINVAL if the modulemode is not supported and 0 in case of success. - */ -static int _am33xx_disable_module(struct omap_hwmod *oh) -{ - int v; - - if (!oh->clkdm || !oh->prcm.omap4.modulemode) - return -EINVAL; - - pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__); - - if (_are_any_hardreset_lines_asserted(oh)) - return 0; - - am33xx_cm_module_disable(oh->clkdm->cm_inst, oh->clkdm->clkdm_offs, - oh->prcm.omap4.clkctrl_offs); - - v = _am33xx_wait_target_disable(oh); - if (v) - pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", - oh->name); - - return 0; -} - -/** * _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit * @oh: struct omap_hwmod * * @@ -2065,10 +1984,7 @@ static void _reconfigure_io_chain(void) spin_lock_irqsave(&io_chain_lock, flags); - if (cpu_is_omap34xx()) - omap3xxx_prm_reconfigure_io_chain(); - else if (cpu_is_omap44xx()) - omap44xx_prm_reconfigure_io_chain(); + omap_prm_reconfigure_io_chain(); spin_unlock_irqrestore(&io_chain_lock, flags); } @@ -2719,11 +2635,33 @@ static int __init _setup(struct omap_hwmod *oh, void *data) if (oh->_state != _HWMOD_STATE_INITIALIZED) return 0; + if (oh->parent_hwmod) { + int r; + + r = _enable(oh->parent_hwmod); + WARN(r, "hwmod: %s: setup: failed to enable parent hwmod %s\n", + oh->name, oh->parent_hwmod->name); + } + _setup_iclk_autoidle(oh); if (!_setup_reset(oh)) _setup_postsetup(oh); + if (oh->parent_hwmod) { + u8 postsetup_state; + + postsetup_state = oh->parent_hwmod->_postsetup_state; + + if (postsetup_state == _HWMOD_STATE_IDLE) + _idle(oh->parent_hwmod); + else if (postsetup_state == _HWMOD_STATE_DISABLED) + _shutdown(oh->parent_hwmod); + else if (postsetup_state != _HWMOD_STATE_ENABLED) + WARN(1, "hwmod: %s: unknown postsetup state %d! defaulting to enabled\n", + oh->parent_hwmod->name, postsetup_state); + } + return 0; } @@ -2832,12 +2770,10 @@ static int __init _add_link(struct omap_hwmod_ocp_if *oi) _alloc_links(&ml, &sl); ml->ocp_if = oi; - INIT_LIST_HEAD(&ml->node); list_add(&ml->node, &oi->master->master_ports); oi->master->masters_cnt++; sl->ocp_if = oi; - INIT_LIST_HEAD(&sl->node); list_add(&sl->node, &oi->slave->slave_ports); oi->slave->slaves_cnt++; @@ -2927,34 +2863,7 @@ static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois) /* Static functions intended only for use in soc_ops field function pointers */ /** - * _omap2xxx_wait_target_ready - wait for a module to leave slave idle - * @oh: struct omap_hwmod * - * - * Wait for a module @oh to leave slave idle. Returns 0 if the module - * does not have an IDLEST bit or if the module successfully leaves - * slave idle; otherwise, pass along the return value of the - * appropriate *_cm*_wait_module_ready() function. - */ -static int _omap2xxx_wait_target_ready(struct omap_hwmod *oh) -{ - if (!oh) - return -EINVAL; - - if (oh->flags & HWMOD_NO_IDLEST) - return 0; - - if (!_find_mpu_rt_port(oh)) - return 0; - - /* XXX check module SIDLEMODE, hardreset status, enabled clocks */ - - return omap2xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs, - oh->prcm.omap2.idlest_reg_id, - oh->prcm.omap2.idlest_idle_bit); -} - -/** - * _omap3xxx_wait_target_ready - wait for a module to leave slave idle + * _omap2xxx_3xxx_wait_target_ready - wait for a module to leave slave idle * @oh: struct omap_hwmod * * * Wait for a module @oh to leave slave idle. Returns 0 if the module @@ -2962,7 +2871,7 @@ static int _omap2xxx_wait_target_ready(struct omap_hwmod *oh) * slave idle; otherwise, pass along the return value of the * appropriate *_cm*_wait_module_ready() function. */ -static int _omap3xxx_wait_target_ready(struct omap_hwmod *oh) +static int _omap2xxx_3xxx_wait_target_ready(struct omap_hwmod *oh) { if (!oh) return -EINVAL; @@ -2975,9 +2884,9 @@ static int _omap3xxx_wait_target_ready(struct omap_hwmod *oh) /* XXX check module SIDLEMODE, hardreset status, enabled clocks */ - return omap3xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs, - oh->prcm.omap2.idlest_reg_id, - oh->prcm.omap2.idlest_idle_bit); + return omap_cm_wait_module_ready(0, oh->prcm.omap2.module_offs, + oh->prcm.omap2.idlest_reg_id, + oh->prcm.omap2.idlest_idle_bit); } /** @@ -3002,37 +2911,9 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh) /* XXX check module SIDLEMODE, hardreset status */ - return omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition, - oh->clkdm->cm_inst, - oh->clkdm->clkdm_offs, - oh->prcm.omap4.clkctrl_offs); -} - -/** - * _am33xx_wait_target_ready - wait for a module to leave slave idle - * @oh: struct omap_hwmod * - * - * Wait for a module @oh to leave slave idle. Returns 0 if the module - * does not have an IDLEST bit or if the module successfully leaves - * slave idle; otherwise, pass along the return value of the - * appropriate *_cm*_wait_module_ready() function. - */ -static int _am33xx_wait_target_ready(struct omap_hwmod *oh) -{ - if (!oh || !oh->clkdm) - return -EINVAL; - - if (oh->flags & HWMOD_NO_IDLEST) - return 0; - - if (!_find_mpu_rt_port(oh)) - return 0; - - /* XXX check module SIDLEMODE, hardreset status */ - - return am33xx_cm_wait_module_ready(oh->clkdm->cm_inst, - oh->clkdm->clkdm_offs, - oh->prcm.omap4.clkctrl_offs); + return omap_cm_wait_module_ready(oh->clkdm->prcm_partition, + oh->clkdm->cm_inst, + oh->prcm.omap4.clkctrl_offs, 0); } /** @@ -3049,8 +2930,8 @@ static int _am33xx_wait_target_ready(struct omap_hwmod *oh) static int _omap2_assert_hardreset(struct omap_hwmod *oh, struct omap_hwmod_rst_info *ohri) { - return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs, - ohri->rst_shift); + return omap_prm_assert_hardreset(ohri->rst_shift, 0, + oh->prcm.omap2.module_offs, 0); } /** @@ -3067,9 +2948,8 @@ static int _omap2_assert_hardreset(struct omap_hwmod *oh, static int _omap2_deassert_hardreset(struct omap_hwmod *oh, struct omap_hwmod_rst_info *ohri) { - return omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs, - ohri->rst_shift, - ohri->st_shift); + return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift, 0, + oh->prcm.omap2.module_offs, 0, 0); } /** @@ -3087,8 +2967,8 @@ static int _omap2_deassert_hardreset(struct omap_hwmod *oh, static int _omap2_is_hardreset_asserted(struct omap_hwmod *oh, struct omap_hwmod_rst_info *ohri) { - return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs, - ohri->st_shift); + return omap_prm_is_hardreset_asserted(ohri->st_shift, 0, + oh->prcm.omap2.module_offs, 0); } /** @@ -3109,10 +2989,10 @@ static int _omap4_assert_hardreset(struct omap_hwmod *oh, if (!oh->clkdm) return -EINVAL; - return omap4_prminst_assert_hardreset(ohri->rst_shift, - oh->clkdm->pwrdm.ptr->prcm_partition, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); + return omap_prm_assert_hardreset(ohri->rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); } /** @@ -3136,10 +3016,10 @@ static int _omap4_deassert_hardreset(struct omap_hwmod *oh, if (ohri->st_shift) pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n", oh->name, ohri->name); - return omap4_prminst_deassert_hardreset(ohri->rst_shift, - oh->clkdm->pwrdm.ptr->prcm_partition, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); + return omap_prm_deassert_hardreset(ohri->rst_shift, 0, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs, 0); } /** @@ -3160,10 +3040,11 @@ static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh, if (!oh->clkdm) return -EINVAL; - return omap4_prminst_is_hardreset_asserted(ohri->rst_shift, - oh->clkdm->pwrdm.ptr->prcm_partition, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); + return omap_prm_is_hardreset_asserted(ohri->rst_shift, + oh->clkdm->pwrdm.ptr-> + prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); } /** @@ -3182,9 +3063,9 @@ static int _am33xx_assert_hardreset(struct omap_hwmod *oh, struct omap_hwmod_rst_info *ohri) { - return am33xx_prm_assert_hardreset(ohri->rst_shift, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); + return omap_prm_assert_hardreset(ohri->rst_shift, 0, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); } /** @@ -3202,11 +3083,10 @@ static int _am33xx_assert_hardreset(struct omap_hwmod *oh, static int _am33xx_deassert_hardreset(struct omap_hwmod *oh, struct omap_hwmod_rst_info *ohri) { - return am33xx_prm_deassert_hardreset(ohri->rst_shift, - ohri->st_shift, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs, - oh->prcm.omap4.rstst_offs); + return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift, 0, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs, + oh->prcm.omap4.rstst_offs); } /** @@ -3224,9 +3104,9 @@ static int _am33xx_deassert_hardreset(struct omap_hwmod *oh, static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh, struct omap_hwmod_rst_info *ohri) { - return am33xx_prm_is_hardreset_asserted(ohri->rst_shift, - oh->clkdm->pwrdm.ptr->prcm_offs, - oh->prcm.omap4.rstctrl_offs); + return omap_prm_is_hardreset_asserted(ohri->rst_shift, 0, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); } /* Public functions */ @@ -4234,12 +4114,12 @@ int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx) void __init omap_hwmod_init(void) { if (cpu_is_omap24xx()) { - soc_ops.wait_target_ready = _omap2xxx_wait_target_ready; + soc_ops.wait_target_ready = _omap2xxx_3xxx_wait_target_ready; soc_ops.assert_hardreset = _omap2_assert_hardreset; soc_ops.deassert_hardreset = _omap2_deassert_hardreset; soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted; } else if (cpu_is_omap34xx()) { - soc_ops.wait_target_ready = _omap3xxx_wait_target_ready; + soc_ops.wait_target_ready = _omap2xxx_3xxx_wait_target_ready; soc_ops.assert_hardreset = _omap2_assert_hardreset; soc_ops.deassert_hardreset = _omap2_deassert_hardreset; soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted; @@ -4258,14 +4138,14 @@ void __init omap_hwmod_init(void) soc_ops.enable_module = _omap4_enable_module; soc_ops.disable_module = _omap4_disable_module; soc_ops.wait_target_ready = _omap4_wait_target_ready; - soc_ops.assert_hardreset = _am33xx_assert_hardreset; - soc_ops.deassert_hardreset = _am33xx_deassert_hardreset; - soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted; + soc_ops.assert_hardreset = _omap4_assert_hardreset; + soc_ops.deassert_hardreset = _omap4_deassert_hardreset; + soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; soc_ops.init_clkdm = _init_clkdm; } else if (soc_is_am33xx()) { - soc_ops.enable_module = _am33xx_enable_module; - soc_ops.disable_module = _am33xx_disable_module; - soc_ops.wait_target_ready = _am33xx_wait_target_ready; + soc_ops.enable_module = _omap4_enable_module; + soc_ops.disable_module = _omap4_disable_module; + soc_ops.wait_target_ready = _omap4_wait_target_ready; soc_ops.assert_hardreset = _am33xx_assert_hardreset; soc_ops.deassert_hardreset = _am33xx_deassert_hardreset; soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted; diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 512f809a3f4d..35ca6efbec31 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -633,6 +633,7 @@ struct omap_hwmod_link { * @flags: hwmod flags (documented below) * @_lock: spinlock serializing operations on this hwmod * @node: list node for hwmod list (internal use) + * @parent_hwmod: (temporary) a pointer to the hierarchical parent of this hwmod * * @main_clk refers to this module's "main clock," which for our * purposes is defined as "the functional clock needed for register @@ -643,6 +644,12 @@ struct omap_hwmod_link { * the omap_hwmod code and should not be set during initialization. * * @masters and @slaves are now deprecated. + * + * @parent_hwmod is temporary; there should be no need for it, as this + * information should already be expressed in the OCP interface + * structures. @parent_hwmod is present as a workaround until we improve + * handling for hwmods with multiple parents (e.g., OMAP4+ DSS with + * multiple register targets across different interconnects). */ struct omap_hwmod { const char *name; @@ -680,6 +687,7 @@ struct omap_hwmod { u8 _int_flags; u8 _state; u8 _postsetup_state; + struct omap_hwmod *parent_hwmod; }; struct omap_hwmod *omap_hwmod_lookup(const char *name); diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index c2555cb95e71..79127b35fe60 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -15,12 +15,12 @@ #include <linux/i2c-omap.h> #include <linux/platform_data/asoc-ti-mcbsp.h> +#include <linux/platform_data/hsmmc-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/omap-dma.h> #include <plat/dmtimer.h> #include "omap_hwmod.h" -#include "mmc.h" #include "l3_2xxx.h" #include "soc.h" @@ -372,7 +372,7 @@ static struct omap_hwmod_opt_clk omap2430_mmc1_opt_clks[] = { { .role = "dbck", .clk = "mmchsdb1_fck" }, }; -static struct omap_mmc_dev_attr mmc1_dev_attr = { +static struct omap_hsmmc_dev_attr mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index a579b89ce9b7..cabc5695b504 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -15,10 +15,10 @@ */ #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/hsmmc-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include "omap_hwmod.h" #include "i2c.h" -#include "mmc.h" #include "wd_timer.h" #include "cm33xx.h" #include "prm33xx.h" @@ -836,7 +836,7 @@ static struct omap_hwmod_class am33xx_mmc_hwmod_class = { }; /* mmc0 */ -static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = { +static struct omap_hsmmc_dev_attr am33xx_mmc0_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; @@ -854,7 +854,7 @@ struct omap_hwmod am33xx_mmc0_hwmod = { }; /* mmc1 */ -static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = { +static struct omap_hsmmc_dev_attr am33xx_mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; @@ -872,7 +872,7 @@ struct omap_hwmod am33xx_mmc1_hwmod = { }; /* mmc2 */ -static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = { +static struct omap_hsmmc_dev_attr am33xx_mmc2_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; struct omap_hwmod am33xx_mmc2_hwmod = { diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 6b406ca4bd3b..0cf7b563dcd1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -27,7 +27,6 @@ #include "prm33xx.h" #include "prm-regbits-33xx.h" #include "i2c.h" -#include "mmc.h" #include "wd_timer.h" #include "omap_hwmod_33xx_43xx_common_data.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 2a78b093c0ce..11468eea3871 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -18,6 +18,7 @@ #include <linux/i2c-omap.h> #include <linux/power/smartreflex.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/hsmmc-omap.h> #include <linux/omap-dma.h> #include "l3_3xxx.h" @@ -37,7 +38,6 @@ #include "cm-regbits-34xx.h" #include "i2c.h" -#include "mmc.h" #include "wd_timer.h" #include "serial.h" @@ -1786,12 +1786,12 @@ static struct omap_hwmod_opt_clk omap34xx_mmc1_opt_clks[] = { { .role = "dbck", .clk = "omap_32k_fck", }, }; -static struct omap_mmc_dev_attr mmc1_dev_attr = { +static struct omap_hsmmc_dev_attr mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; /* See 35xx errata 2.1.1.128 in SPRZ278F */ -static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = { +static struct omap_hsmmc_dev_attr mmc1_pre_es3_dev_attr = { .flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT | OMAP_HSMMC_BROKEN_MULTIBLOCK_READ), }; @@ -1854,7 +1854,7 @@ static struct omap_hwmod_opt_clk omap34xx_mmc2_opt_clks[] = { }; /* See 35xx errata 2.1.1.128 in SPRZ278F */ -static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = { +static struct omap_hsmmc_dev_attr mmc2_pre_es3_dev_attr = { .flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index fea01aa3ef42..5c6c8410160e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -417,6 +417,37 @@ static struct omap_hwmod am43xx_qspi_hwmod = { }, }; +/* + * 'adc/tsc' class + * TouchScreen Controller (Analog-To-Digital Converter) + */ +static struct omap_hwmod_class_sysconfig am43xx_adc_tsc_sysc = { + .rev_offs = 0x00, + .sysc_offs = 0x10, + .sysc_flags = SYSC_HAS_SIDLEMODE, + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class am43xx_adc_tsc_hwmod_class = { + .name = "adc_tsc", + .sysc = &am43xx_adc_tsc_sysc, +}; + +static struct omap_hwmod am43xx_adc_tsc_hwmod = { + .name = "adc_tsc", + .class = &am43xx_adc_tsc_hwmod_class, + .clkdm_name = "l3s_tsc_clkdm", + .main_clk = "adc_tsc_fck", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + /* dss */ static struct omap_hwmod am43xx_dss_core_hwmod = { @@ -547,6 +578,13 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__gpio0 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +static struct omap_hwmod_ocp_if am43xx_l4_wkup__adc_tsc = { + .master = &am33xx_l4_wkup_hwmod, + .slave = &am43xx_adc_tsc_hwmod, + .clk = "dpll_core_m4_div2_ck", + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_ocp_if am43xx_l4_hs__cpgmac0 = { .master = &am43xx_l4_hs_hwmod, .slave = &am33xx_cpgmac0_hwmod, @@ -789,6 +827,7 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_wkup__i2c1, &am43xx_l4_wkup__gpio0, &am43xx_l4_wkup__wd_timer1, + &am43xx_l4_wkup__adc_tsc, &am43xx_l3_s__qspi, &am33xx_l4_per__dcan0, &am33xx_l4_per__dcan1, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 44e5634bba34..c314b3c31117 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/hsmmc-omap.h> #include <linux/power/smartreflex.h> #include <linux/i2c-omap.h> @@ -39,7 +40,6 @@ #include "prm44xx.h" #include "prm-regbits-44xx.h" #include "i2c.h" -#include "mmc.h" #include "wd_timer.h" /* Base offset for all OMAP4 interrupts external to MPUSS */ @@ -589,6 +589,7 @@ static struct omap_hwmod omap44xx_dss_hwmod = { .omap4 = { .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .opt_clks = dss_opt_clks, @@ -647,7 +648,8 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = { .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, - .dev_attr = &omap44xx_dss_dispc_dev_attr + .dev_attr = &omap44xx_dss_dispc_dev_attr, + .parent_hwmod = &omap44xx_dss_hwmod, }; /* @@ -701,6 +703,7 @@ static struct omap_hwmod omap44xx_dss_dsi1_hwmod = { }, .opt_clks = dss_dsi1_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks), + .parent_hwmod = &omap44xx_dss_hwmod, }; /* dss_dsi2 */ @@ -733,6 +736,7 @@ static struct omap_hwmod omap44xx_dss_dsi2_hwmod = { }, .opt_clks = dss_dsi2_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_dsi2_opt_clks), + .parent_hwmod = &omap44xx_dss_hwmod, }; /* @@ -790,6 +794,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { }, .opt_clks = dss_hdmi_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), + .parent_hwmod = &omap44xx_dss_hwmod, }; /* @@ -819,7 +824,7 @@ static struct omap_hwmod_dma_info omap44xx_dss_rfbi_sdma_reqs[] = { }; static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { - { .role = "ick", .clk = "dss_fck" }, + { .role = "ick", .clk = "l3_div_ck" }, }; static struct omap_hwmod omap44xx_dss_rfbi_hwmod = { @@ -836,6 +841,7 @@ static struct omap_hwmod omap44xx_dss_rfbi_hwmod = { }, .opt_clks = dss_rfbi_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), + .parent_hwmod = &omap44xx_dss_hwmod, }; /* @@ -859,6 +865,7 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = { .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, + .parent_hwmod = &omap44xx_dss_hwmod, }; /* @@ -1952,7 +1959,7 @@ static struct omap_hwmod_dma_info omap44xx_mmc1_sdma_reqs[] = { }; /* mmc1 dev_attr */ -static struct omap_mmc_dev_attr mmc1_dev_attr = { +static struct omap_hsmmc_dev_attr mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; @@ -3671,7 +3678,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dma_addrs[] = { static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_hwmod, - .clk = "dss_fck", + .clk = "l3_div_ck", .addr = omap44xx_dss_dma_addrs, .user = OCP_USER_SDMA, }; @@ -3707,7 +3714,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = { static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_dispc_hwmod, - .clk = "dss_fck", + .clk = "l3_div_ck", .addr = omap44xx_dss_dispc_dma_addrs, .user = OCP_USER_SDMA, }; @@ -3743,7 +3750,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = { static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_dsi1_hwmod, - .clk = "dss_fck", + .clk = "l3_div_ck", .addr = omap44xx_dss_dsi1_dma_addrs, .user = OCP_USER_SDMA, }; @@ -3779,7 +3786,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = { static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_dsi2_hwmod, - .clk = "dss_fck", + .clk = "l3_div_ck", .addr = omap44xx_dss_dsi2_dma_addrs, .user = OCP_USER_SDMA, }; @@ -3815,7 +3822,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = { static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_hdmi_hwmod, - .clk = "dss_fck", + .clk = "l3_div_ck", .addr = omap44xx_dss_hdmi_dma_addrs, .user = OCP_USER_SDMA, }; @@ -3851,7 +3858,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = { static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_rfbi_hwmod, - .clk = "dss_fck", + .clk = "l3_div_ck", .addr = omap44xx_dss_rfbi_dma_addrs, .user = OCP_USER_SDMA, }; @@ -3887,7 +3894,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_venc_dma_addrs[] = { static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_venc_hwmod, - .clk = "dss_fck", + .clk = "l3_div_ck", .addr = omap44xx_dss_venc_dma_addrs, .user = OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 1103aa0e0d29..3e9523084b2a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/hsmmc-omap.h> #include <linux/power/smartreflex.h> #include <linux/i2c-omap.h> @@ -33,7 +34,6 @@ #include "cm2_54xx.h" #include "prm54xx.h" #include "i2c.h" -#include "mmc.h" #include "wd_timer.h" /* Base offset for all OMAP5 interrupts external to MPUSS */ @@ -421,6 +421,7 @@ static struct omap_hwmod omap54xx_dss_dispc_hwmod = { .opt_clks = dss_dispc_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks), .dev_attr = &dss_dispc_dev_attr, + .parent_hwmod = &omap54xx_dss_hwmod, }; /* @@ -462,6 +463,7 @@ static struct omap_hwmod omap54xx_dss_dsi1_a_hwmod = { }, .opt_clks = dss_dsi1_a_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_a_opt_clks), + .parent_hwmod = &omap54xx_dss_hwmod, }; /* dss_dsi1_c */ @@ -482,6 +484,7 @@ static struct omap_hwmod omap54xx_dss_dsi1_c_hwmod = { }, .opt_clks = dss_dsi1_c_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_c_opt_clks), + .parent_hwmod = &omap54xx_dss_hwmod, }; /* @@ -521,6 +524,7 @@ static struct omap_hwmod omap54xx_dss_hdmi_hwmod = { }, .opt_clks = dss_hdmi_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), + .parent_hwmod = &omap54xx_dss_hwmod, }; /* @@ -560,6 +564,7 @@ static struct omap_hwmod omap54xx_dss_rfbi_hwmod = { }, .opt_clks = dss_rfbi_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), + .parent_hwmod = &omap54xx_dss_hwmod, }; /* @@ -1269,7 +1274,7 @@ static struct omap_hwmod_opt_clk mmc1_opt_clks[] = { }; /* mmc1 dev_attr */ -static struct omap_mmc_dev_attr mmc1_dev_attr = { +static struct omap_hsmmc_dev_attr mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 5684f112654b..ffd6604cd546 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/hsmmc-omap.h> #include <linux/power/smartreflex.h> #include <linux/i2c-omap.h> @@ -33,7 +34,6 @@ #include "cm2_7xx.h" #include "prm7xx.h" #include "i2c.h" -#include "mmc.h" #include "wd_timer.h" #include "soc.h" @@ -1301,7 +1301,7 @@ static struct omap_hwmod_opt_clk mmc1_opt_clks[] = { }; /* mmc1 dev_attr */ -static struct omap_mmc_dev_attr mmc1_dev_attr = { +static struct omap_hsmmc_dev_attr mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; @@ -2075,6 +2075,70 @@ static struct omap_hwmod dra7xx_uart6_hwmod = { }, }; +/* uart7 */ +static struct omap_hwmod dra7xx_uart7_hwmod = { + .name = "uart7", + .class = &dra7xx_uart_hwmod_class, + .clkdm_name = "l4per2_clkdm", + .main_clk = "uart7_gfclk_mux", + .flags = HWMOD_SWSUP_SIDLE_ACT, + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4PER2_UART7_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4PER2_UART7_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* uart8 */ +static struct omap_hwmod dra7xx_uart8_hwmod = { + .name = "uart8", + .class = &dra7xx_uart_hwmod_class, + .clkdm_name = "l4per2_clkdm", + .main_clk = "uart8_gfclk_mux", + .flags = HWMOD_SWSUP_SIDLE_ACT, + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4PER2_UART8_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4PER2_UART8_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* uart9 */ +static struct omap_hwmod dra7xx_uart9_hwmod = { + .name = "uart9", + .class = &dra7xx_uart_hwmod_class, + .clkdm_name = "l4per2_clkdm", + .main_clk = "uart9_gfclk_mux", + .flags = HWMOD_SWSUP_SIDLE_ACT, + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_L4PER2_UART9_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_L4PER2_UART9_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +/* uart10 */ +static struct omap_hwmod dra7xx_uart10_hwmod = { + .name = "uart10", + .class = &dra7xx_uart_hwmod_class, + .clkdm_name = "wkupaon_clkdm", + .main_clk = "uart10_gfclk_mux", + .flags = HWMOD_SWSUP_SIDLE_ACT, + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_WKUPAON_UART10_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_WKUPAON_UART10_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + /* * 'usb_otg_ss' class * @@ -3095,6 +3159,38 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__uart6 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; +/* l4_per2 -> uart7 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart7 = { + .master = &dra7xx_l4_per2_hwmod, + .slave = &dra7xx_uart7_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per2 -> uart8 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart8 = { + .master = &dra7xx_l4_per2_hwmod, + .slave = &dra7xx_uart8_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_per2 -> uart9 */ +static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart9 = { + .master = &dra7xx_l4_per2_hwmod, + .slave = &dra7xx_uart9_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l4_wkup -> uart10 */ +static struct omap_hwmod_ocp_if dra7xx_l4_wkup__uart10 = { + .master = &dra7xx_l4_wkup_hwmod, + .slave = &dra7xx_uart10_hwmod, + .clk = "wkupaon_iclk_mux", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* l4_per3 -> usb_otg_ss1 */ static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = { .master = &dra7xx_l4_per3_hwmod, @@ -3259,6 +3355,10 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per1__uart4, &dra7xx_l4_per1__uart5, &dra7xx_l4_per1__uart6, + &dra7xx_l4_per2__uart7, + &dra7xx_l4_per2__uart8, + &dra7xx_l4_per2__uart9, + &dra7xx_l4_wkup__uart10, &dra7xx_l4_per3__usb_otg_ss1, &dra7xx_l4_per3__usb_otg_ss2, &dra7xx_l4_per3__usb_otg_ss3, diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 50640b38f0bf..1a19fa096bab 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -21,6 +21,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/types.h> #include <linux/delay.h> #include <linux/clk.h> @@ -97,13 +99,13 @@ void am35x_musb_phy_power(u8 on) omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); - pr_info(KERN_INFO "Waiting for PHY clock good...\n"); + pr_info("Waiting for PHY clock good...\n"); while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2) & CONF2_PHYCLKGD)) { cpu_relax(); if (time_after(jiffies, timeout)) { - pr_err(KERN_ERR "musb PHY clock good timed out\n"); + pr_err("musb PHY clock good timed out\n"); break; } } @@ -145,7 +147,7 @@ void am35x_set_mode(u8 musb_mode) devconf2 |= CONF2_NO_OVERRIDE; break; default: - pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode); + pr_info("Unsupported mode %u\n", musb_mode); } omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2); diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index cec9d6c6442c..3d7eee1d3cfa 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/of_platform.h> +#include <linux/ti_wilink_st.h> #include <linux/wl12xx.h> #include <linux/platform_data/pinctrl-single.h> @@ -130,17 +131,45 @@ static void __init omap3_sbc_t3730_legacy_init(void) { omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 136); - omap_ads7846_init(1, 57, 0, NULL); } static void __init omap3_sbc_t3530_legacy_init(void) { omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); - omap_ads7846_init(1, 57, 0, NULL); } -static void __init omap3_igep0020_legacy_init(void) +struct ti_st_plat_data wilink_pdata = { + .nshutdown_gpio = 137, + .dev_name = "/dev/ttyO1", + .flow_cntrl = 1, + .baud_rate = 300000, +}; + +static struct platform_device wl18xx_device = { + .name = "kim", + .id = -1, + .dev = { + .platform_data = &wilink_pdata, + } +}; + +static struct platform_device btwilink_device = { + .name = "btwilink", + .id = -1, +}; + +static void __init omap3_igep0020_rev_f_legacy_init(void) +{ + legacy_init_wl12xx(0, 0, 177); + platform_device_register(&wl18xx_device); + platform_device_register(&btwilink_device); +} + +static void __init omap3_igep0030_rev_g_legacy_init(void) { + legacy_init_wl12xx(0, 0, 136); + platform_device_register(&wl18xx_device); + platform_device_register(&btwilink_device); } static void __init omap3_evm_legacy_init(void) @@ -218,7 +247,6 @@ static void __init omap3_sbc_t3517_legacy_init(void) hsmmc2_internal_input_clk(); omap3_sbc_t3517_wifi_init(); legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 145); - omap_ads7846_init(1, 57, 0, NULL); } static void __init am3517_evm_legacy_init(void) @@ -390,7 +418,8 @@ static struct pdata_init pdata_quirks[] __initdata = { { "nokia,omap3-n900", nokia_n900_legacy_init, }, { "nokia,omap3-n9", hsmmc2_internal_input_clk, }, { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, - { "isee,omap3-igep0020", omap3_igep0020_legacy_init, }, + { "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, }, + { "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, }, { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, { "ti,omap3-zoom3", omap3_zoom_legacy_init, }, { "ti,am3517-evm", am3517_evm_legacy_init, }, diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 175564c88a30..88721df6001d 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -29,6 +29,7 @@ #include <linux/delay.h> #include <linux/slab.h> #include <linux/omap-dma.h> +#include <linux/omap-gpmc.h> #include <linux/platform_data/gpio-omap.h> #include <trace/events/power.h> @@ -43,7 +44,6 @@ #include "common.h" #include "cm3xxx.h" #include "cm-regbits-34xx.h" -#include "gpmc.h" #include "prm-regbits-34xx.h" #include "prm3xxx.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 503097c72b82..d697cecf762b 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -37,6 +37,16 @@ struct power_state { struct list_head node; }; +/** + * struct static_dep_map - Static dependency map + * @from: from clockdomain + * @to: to clockdomain + */ +struct static_dep_map { + const char *from; + const char *to; +}; + static u32 cpu_suspend_state = PWRDM_POWER_OFF; static LIST_HEAD(pwrst_list); @@ -148,94 +158,61 @@ static void omap_default_idle(void) omap_do_wfi(); } -/** - * omap4_init_static_deps - Add OMAP4 static dependencies - * - * Add needed static clockdomain dependencies on OMAP4 devices. - * Return: 0 on success or 'err' on failures +/* + * The dynamic dependency between MPUSS -> MEMIF and + * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as + * expected. The hardware recommendation is to enable static + * dependencies for these to avoid system lock ups or random crashes. + * The L4 wakeup depedency is added to workaround the OCP sync hardware + * BUG with 32K synctimer which lead to incorrect timer value read + * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which + * are part of L4 wakeup clockdomain. */ -static inline int omap4_init_static_deps(void) -{ - struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm; - struct clockdomain *ducati_clkdm, *l3_2_clkdm; - int ret = 0; - - if (omap_rev() == OMAP4430_REV_ES1_0) { - WARN(1, "Power Management not supported on OMAP4430 ES1.0\n"); - return -ENODEV; - } - - pr_err("Power Management for TI OMAP4.\n"); - /* - * OMAP4 chip PM currently works only with certain (newer) - * versions of bootloaders. This is due to missing code in the - * kernel to properly reset and initialize some devices. - * http://www.spinics.net/lists/arm-kernel/msg218641.html - */ - pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n"); - - ret = pwrdm_for_each(pwrdms_setup, NULL); - if (ret) { - pr_err("Failed to setup powerdomains\n"); - return ret; - } - - /* - * The dynamic dependency between MPUSS -> MEMIF and - * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as - * expected. The hardware recommendation is to enable static - * dependencies for these to avoid system lock ups or random crashes. - * The L4 wakeup depedency is added to workaround the OCP sync hardware - * BUG with 32K synctimer which lead to incorrect timer value read - * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which - * are part of L4 wakeup clockdomain. - */ - mpuss_clkdm = clkdm_lookup("mpuss_clkdm"); - emif_clkdm = clkdm_lookup("l3_emif_clkdm"); - l3_1_clkdm = clkdm_lookup("l3_1_clkdm"); - l3_2_clkdm = clkdm_lookup("l3_2_clkdm"); - ducati_clkdm = clkdm_lookup("ducati_clkdm"); - if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || - (!l3_2_clkdm) || (!ducati_clkdm)) - return -EINVAL; - - ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm); - ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm); - ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm); - ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm); - ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm); - if (ret) { - pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n"); - return -EINVAL; - } +static const struct static_dep_map omap4_static_dep_map[] = { + {.from = "mpuss_clkdm", .to = "l3_emif_clkdm"}, + {.from = "mpuss_clkdm", .to = "l3_1_clkdm"}, + {.from = "mpuss_clkdm", .to = "l3_2_clkdm"}, + {.from = "ducati_clkdm", .to = "l3_1_clkdm"}, + {.from = "ducati_clkdm", .to = "l3_2_clkdm"}, + {.from = NULL} /* TERMINATION */ +}; - return ret; -} +static const struct static_dep_map omap5_dra7_static_dep_map[] = { + {.from = "mpu_clkdm", .to = "emif_clkdm"}, + {.from = NULL} /* TERMINATION */ +}; /** - * omap5_dra7_init_static_deps - Init static clkdm dependencies on OMAP5 and - * DRA7 - * - * The dynamic dependency between MPUSS -> EMIF is broken and has - * not worked as expected. The hardware recommendation is to - * enable static dependencies for these to avoid system - * lock ups or random crashes. + * omap4plus_init_static_deps() - Initialize a static dependency map + * @map: Mapping of clock domains */ -static inline int omap5_dra7_init_static_deps(void) +static inline int omap4plus_init_static_deps(const struct static_dep_map *map) { - struct clockdomain *mpuss_clkdm, *emif_clkdm; int ret; + struct clockdomain *from, *to; + + if (!map) + return 0; - mpuss_clkdm = clkdm_lookup("mpu_clkdm"); - emif_clkdm = clkdm_lookup("emif_clkdm"); - if (!mpuss_clkdm || !emif_clkdm) - return -EINVAL; + while (map->from) { + from = clkdm_lookup(map->from); + to = clkdm_lookup(map->to); + if (!from || !to) { + pr_err("Failed lookup %s or %s for wakeup dependency\n", + map->from, map->to); + return -EINVAL; + } + ret = clkdm_add_wkdep(from, to); + if (ret) { + pr_err("Failed to add %s -> %s wakeup dependency(%d)\n", + map->from, map->to, ret); + return ret; + } - ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm); - if (ret) - pr_err("Failed to add MPUSS -> EMIF wakeup dependency\n"); + map++; + }; - return ret; + return 0; } /** @@ -272,6 +249,15 @@ int __init omap4_pm_init(void) pr_info("Power Management for TI OMAP4+ devices.\n"); + /* + * OMAP4 chip PM currently works only with certain (newer) + * versions of bootloaders. This is due to missing code in the + * kernel to properly reset and initialize some devices. + * http://www.spinics.net/lists/arm-kernel/msg218641.html + */ + if (cpu_is_omap44xx()) + pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n"); + ret = pwrdm_for_each(pwrdms_setup, NULL); if (ret) { pr_err("Failed to setup powerdomains.\n"); @@ -279,9 +265,9 @@ int __init omap4_pm_init(void) } if (cpu_is_omap44xx()) - ret = omap4_init_static_deps(); + ret = omap4plus_init_static_deps(omap4_static_dep_map); else if (soc_is_omap54xx() || soc_is_dra7xx()) - ret = omap5_dra7_init_static_deps(); + ret = omap4plus_init_static_deps(omap5_dra7_static_dep_map); if (ret) { pr_err("Failed to initialise static dependencies.\n"); diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 48480d557b61..77752e49d8d4 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -29,6 +29,7 @@ int of_prcm_init(void); * PRM_HAS_VOLTAGE: has voltage domains */ #define PRM_HAS_IO_WAKEUP (1 << 0) +#define PRM_HAS_VOLTAGE (1 << 1) /* * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP @@ -127,6 +128,8 @@ struct prm_reset_src_map { * @was_any_context_lost_old: ptr to the SoC PRM context loss test fn * @clear_context_loss_flags_old: ptr to the SoC PRM context loss flag clear fn * @late_init: ptr to the late init function + * @assert_hardreset: ptr to the SoC PRM hardreset assert impl + * @deassert_hardreset: ptr to the SoC PRM hardreset deassert impl * * XXX @was_any_context_lost_old and @clear_context_loss_flags_old are * deprecated. @@ -136,14 +139,27 @@ struct prm_ll_data { bool (*was_any_context_lost_old)(u8 part, s16 inst, u16 idx); void (*clear_context_loss_flags_old)(u8 part, s16 inst, u16 idx); int (*late_init)(void); + int (*assert_hardreset)(u8 shift, u8 part, s16 prm_mod, u16 offset); + int (*deassert_hardreset)(u8 shift, u8 st_shift, u8 part, s16 prm_mod, + u16 offset, u16 st_offset); + int (*is_hardreset_asserted)(u8 shift, u8 part, s16 prm_mod, + u16 offset); + void (*reset_system)(void); }; extern int prm_register(struct prm_ll_data *pld); extern int prm_unregister(struct prm_ll_data *pld); +int omap_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset); +int omap_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 prm_mod, + u16 offset, u16 st_offset); +int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset); extern u32 prm_read_reset_sources(void); extern bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx); extern void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx); +void omap_prm_reset_system(void); + +void omap_prm_reconfigure_io_chain(void); #endif diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c index 86958050547a..af0f15278fc2 100644 --- a/arch/arm/mach-omap2/prm2xxx.c +++ b/arch/arm/mach-omap2/prm2xxx.c @@ -106,7 +106,7 @@ static int omap2xxx_pwrst_to_common_pwrst(u8 omap2xxx_pwrst) * Set the DPLL reset bit, which should reboot the SoC. This is the * recommended way to restart the SoC. No return value. */ -void omap2xxx_prm_dpll_reset(void) +static void omap2xxx_prm_dpll_reset(void) { omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, WKUP_MOD, OMAP2_RM_RSTCTRL); @@ -212,6 +212,10 @@ struct pwrdm_ops omap2_pwrdm_operations = { static struct prm_ll_data omap2xxx_prm_ll_data = { .read_reset_sources = &omap2xxx_prm_read_reset_sources, + .assert_hardreset = &omap2_prm_assert_hardreset, + .deassert_hardreset = &omap2_prm_deassert_hardreset, + .is_hardreset_asserted = &omap2_prm_is_hardreset_asserted, + .reset_system = &omap2xxx_prm_dpll_reset, }; int __init omap2xxx_prm_init(void) diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h index d73414139292..1d51643062f7 100644 --- a/arch/arm/mach-omap2/prm2xxx.h +++ b/arch/arm/mach-omap2/prm2xxx.h @@ -124,7 +124,6 @@ extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm); extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm); -extern void omap2xxx_prm_dpll_reset(void); void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask); extern int __init omap2xxx_prm_init(void); diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index c13b4e293ffa..cc3341f263cd 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -24,14 +24,16 @@ /** * omap2_prm_is_hardreset_asserted - read the HW reset line state of * submodules contained in the hwmod module - * @prm_mod: PRM submodule base (e.g. CORE_MOD) * @shift: register bit shift corresponding to the reset line to check + * @part: PRM partition, ignored for OMAP2 + * @prm_mod: PRM submodule base (e.g. CORE_MOD) + * @offset: register offset, ignored for OMAP2 * * Returns 1 if the (sub)module hardreset line is currently asserted, * 0 if the (sub)module hardreset line is not currently asserted, or * -EINVAL if called while running on a non-OMAP2/3 chip. */ -int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) +int omap2_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset) { return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, (1 << shift)); @@ -39,8 +41,10 @@ int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) /** * omap2_prm_assert_hardreset - assert the HW reset line of a submodule - * @prm_mod: PRM submodule base (e.g. CORE_MOD) * @shift: register bit shift corresponding to the reset line to assert + * @part: PRM partition, ignored for OMAP2 + * @prm_mod: PRM submodule base (e.g. CORE_MOD) + * @offset: register offset, ignored for OMAP2 * * Some IPs like dsp or iva contain processors that require an HW * reset line to be asserted / deasserted in order to fully enable the @@ -49,7 +53,7 @@ int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) * place the submodule into reset. Returns 0 upon success or -EINVAL * upon an argument error. */ -int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) +int omap2_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset) { u32 mask; @@ -64,6 +68,10 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) * @prm_mod: PRM submodule base (e.g. CORE_MOD) * @rst_shift: register bit shift corresponding to the reset line to deassert * @st_shift: register bit shift for the status of the deasserted submodule + * @part: PRM partition, not used for OMAP2 + * @prm_mod: PRM submodule base (e.g. CORE_MOD) + * @rst_offset: reset register offset, not used for OMAP2 + * @st_offset: reset status register offset, not used for OMAP2 * * Some IPs like dsp or iva contain processors that require an HW * reset line to be asserted / deasserted in order to fully enable the @@ -74,7 +82,8 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) * -EINVAL upon an argument error, -EEXIST if the submodule was already out * of reset, or -EBUSY if the submodule did not exit reset promptly. */ -int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift) +int omap2_prm_deassert_hardreset(u8 rst_shift, u8 st_shift, u8 part, + s16 prm_mod, u16 rst_offset, u16 st_offset) { u32 rst, st; int c; diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index 1a3a96392b97..f57e29b0e041 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -100,9 +100,12 @@ static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) } /* These omap2_ PRM functions apply to both OMAP2 and 3 */ -extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift); -extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift); -extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift); +int omap2_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset); +int omap2_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, + u16 offset); +int omap2_prm_deassert_hardreset(u8 rst_shift, u8 st_shift, u8 part, + s16 prm_mod, u16 reset_offset, + u16 st_offset); extern int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst); extern int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm); diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c index 62709cd2f9c5..02f628601b09 100644 --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -23,20 +23,24 @@ #include "prm33xx.h" #include "prm-regbits-33xx.h" +#define AM33XX_PRM_RSTCTRL_OFFSET 0x0000 + +#define AM33XX_RST_GLOBAL_WARM_SW_MASK (1 << 0) + /* Read a register in a PRM instance */ -u32 am33xx_prm_read_reg(s16 inst, u16 idx) +static u32 am33xx_prm_read_reg(s16 inst, u16 idx) { return readl_relaxed(prm_base + inst + idx); } /* Write into a register in a PRM instance */ -void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx) +static void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx) { writel_relaxed(val, prm_base + inst + idx); } /* Read-modify-write a register in PRM. Caller must lock */ -u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx) +static u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx) { u32 v; @@ -52,6 +56,7 @@ u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx) * am33xx_prm_is_hardreset_asserted - read the HW reset line state of * submodules contained in the hwmod module * @shift: register bit shift corresponding to the reset line to check + * @part: PRM partition, ignored for AM33xx * @inst: CM instance register offset (*_INST macro) * @rstctrl_offs: RM_RSTCTRL register address offset for this module * @@ -59,7 +64,8 @@ u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx) * 0 if the (sub)module hardreset line is not currently asserted, or * -EINVAL upon parameter error. */ -int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs) +static int am33xx_prm_is_hardreset_asserted(u8 shift, u8 part, s16 inst, + u16 rstctrl_offs) { u32 v; @@ -73,6 +79,7 @@ int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs) /** * am33xx_prm_assert_hardreset - assert the HW reset line of a submodule * @shift: register bit shift corresponding to the reset line to assert + * @part: CM partition, ignored for AM33xx * @inst: CM instance register offset (*_INST macro) * @rstctrl_reg: RM_RSTCTRL register address for this module * @@ -83,7 +90,8 @@ int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs) * place the submodule into reset. Returns 0 upon success or -EINVAL * upon an argument error. */ -int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs) +static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst, + u16 rstctrl_offs) { u32 mask = 1 << shift; @@ -96,6 +104,8 @@ int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs) * am33xx_prm_deassert_hardreset - deassert a submodule hardreset line and * wait * @shift: register bit shift corresponding to the reset line to deassert + * @st_shift: reset status register bit shift corresponding to the reset line + * @part: PRM partition, not used for AM33xx * @inst: CM instance register offset (*_INST macro) * @rstctrl_reg: RM_RSTCTRL register address for this module * @rstst_reg: RM_RSTST register address for this module @@ -109,14 +119,15 @@ int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs) * -EINVAL upon an argument error, -EEXIST if the submodule was already out * of reset, or -EBUSY if the submodule did not exit reset promptly. */ -int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst, - u16 rstctrl_offs, u16 rstst_offs) +static int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, + s16 inst, u16 rstctrl_offs, + u16 rstst_offs) { int c; u32 mask = 1 << st_shift; /* Check the current status to avoid de-asserting the line twice */ - if (am33xx_prm_is_hardreset_asserted(shift, inst, rstctrl_offs) == 0) + if (am33xx_prm_is_hardreset_asserted(shift, 0, inst, rstctrl_offs) == 0) return -EEXIST; /* Clear the reset status by writing 1 to the status bit */ @@ -128,7 +139,7 @@ int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst, am33xx_prm_rmw_reg_bits(mask, 0, inst, rstctrl_offs); /* wait the status to be set */ - omap_test_timeout(am33xx_prm_is_hardreset_asserted(st_shift, inst, + omap_test_timeout(am33xx_prm_is_hardreset_asserted(st_shift, 0, inst, rstst_offs), MAX_MODULE_HARDRESET_WAIT, c); @@ -325,6 +336,23 @@ static int am33xx_check_vcvp(void) return 0; } +/** + * am33xx_prm_global_warm_sw_reset - reboot the device via warm reset + * + * Immediately reboots the device through warm reset. + */ +static void am33xx_prm_global_warm_sw_reset(void) +{ + am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK, + AM33XX_RST_GLOBAL_WARM_SW_MASK, + AM33XX_PRM_DEVICE_MOD, + AM33XX_PRM_RSTCTRL_OFFSET); + + /* OCP barrier */ + (void)am33xx_prm_read_reg(AM33XX_PRM_DEVICE_MOD, + AM33XX_PRM_RSTCTRL_OFFSET); +} + struct pwrdm_ops am33xx_pwrdm_operations = { .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst, .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst, @@ -342,3 +370,21 @@ struct pwrdm_ops am33xx_pwrdm_operations = { .pwrdm_wait_transition = am33xx_pwrdm_wait_transition, .pwrdm_has_voltdm = am33xx_check_vcvp, }; + +static struct prm_ll_data am33xx_prm_ll_data = { + .assert_hardreset = am33xx_prm_assert_hardreset, + .deassert_hardreset = am33xx_prm_deassert_hardreset, + .is_hardreset_asserted = am33xx_prm_is_hardreset_asserted, + .reset_system = am33xx_prm_global_warm_sw_reset, +}; + +int __init am33xx_prm_init(void) +{ + return prm_register(&am33xx_prm_ll_data); +} + +static void __exit am33xx_prm_exit(void) +{ + prm_unregister(&am33xx_prm_ll_data); +} +__exitcall(am33xx_prm_exit); diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h index 9b9918dfb119..98ac41f271da 100644 --- a/arch/arm/mach-omap2/prm33xx.h +++ b/arch/arm/mach-omap2/prm33xx.h @@ -118,14 +118,7 @@ #define AM33XX_PM_CEFUSE_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004) #ifndef __ASSEMBLER__ -extern u32 am33xx_prm_read_reg(s16 inst, u16 idx); -extern void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx); -extern u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); -extern void am33xx_prm_global_warm_sw_reset(void); -extern int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, - u16 rstctrl_offs); -extern int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs); -extern int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst, - u16 rstctrl_offs, u16 rstst_offs); +int am33xx_prm_init(void); + #endif /* ASSEMBLER */ #endif diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index ff08da385a2d..c5e00c6714b1 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -30,6 +30,11 @@ #include "cm3xxx.h" #include "cm-regbits-34xx.h" +static void omap3xxx_prm_read_pending_irqs(unsigned long *events); +static void omap3xxx_prm_ocp_barrier(void); +static void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask); +static void omap3xxx_prm_restore_irqen(u32 *saved_mask); + static const struct omap_prcm_irq omap3_prcm_irqs[] = { OMAP_PRCM_IRQ("wkup", 0, 0), OMAP_PRCM_IRQ("io", 9, 1), @@ -131,7 +136,7 @@ u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) * recommended way to restart the SoC, considering Errata i520. No * return value. */ -void omap3xxx_prm_dpll3_reset(void) +static void omap3xxx_prm_dpll3_reset(void) { omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, OMAP3430_GR_MOD, OMAP2_RM_RSTCTRL); @@ -147,7 +152,7 @@ void omap3xxx_prm_dpll3_reset(void) * MPU IRQs, and store the result into the u32 pointed to by @events. * No return value. */ -void omap3xxx_prm_read_pending_irqs(unsigned long *events) +static void omap3xxx_prm_read_pending_irqs(unsigned long *events) { u32 mask, st; @@ -166,7 +171,7 @@ void omap3xxx_prm_read_pending_irqs(unsigned long *events) * block, to avoid race conditions after acknowledging or clearing IRQ * bits. No return value. */ -void omap3xxx_prm_ocp_barrier(void) +static void omap3xxx_prm_ocp_barrier(void) { omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET); } @@ -182,7 +187,7 @@ void omap3xxx_prm_ocp_barrier(void) * returning; otherwise, spurious interrupts might occur. No return * value. */ -void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask) +static void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask) { saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); @@ -202,7 +207,7 @@ void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask) * barrier should be needed here; any pending PRM interrupts will fire * once the writes reach the PRM. No return value. */ -void omap3xxx_prm_restore_irqen(u32 *saved_mask) +static void omap3xxx_prm_restore_irqen(u32 *saved_mask) { omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); @@ -375,7 +380,7 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva) * The ST_IO_CHAIN bit does not exist in 3430 before es3.1. The only * thing we can do is toggle EN_IO bit for earlier omaps. */ -void omap3430_pre_es3_1_reconfigure_io_chain(void) +static void omap3430_pre_es3_1_reconfigure_io_chain(void) { omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); @@ -393,7 +398,7 @@ void omap3430_pre_es3_1_reconfigure_io_chain(void) * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No * return value. These registers are only available in 3430 es3.1 and later. */ -void omap3_prm_reconfigure_io_chain(void) +static void omap3_prm_reconfigure_io_chain(void) { int i = 0; @@ -416,15 +421,6 @@ void omap3_prm_reconfigure_io_chain(void) } /** - * omap3xxx_prm_reconfigure_io_chain - reconfigure I/O chain - */ -void omap3xxx_prm_reconfigure_io_chain(void) -{ - if (omap3_prcm_irq_setup.reconfigure_io_chain) - omap3_prcm_irq_setup.reconfigure_io_chain(); -} - -/** * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches * * Activates the I/O wakeup event latches and allows events logged by @@ -664,6 +660,10 @@ static int omap3xxx_prm_late_init(void); static struct prm_ll_data omap3xxx_prm_ll_data = { .read_reset_sources = &omap3xxx_prm_read_reset_sources, .late_init = &omap3xxx_prm_late_init, + .assert_hardreset = &omap2_prm_assert_hardreset, + .deassert_hardreset = &omap2_prm_deassert_hardreset, + .is_hardreset_asserted = &omap2_prm_is_hardreset_asserted, + .reset_system = &omap3xxx_prm_dpll3_reset, }; int __init omap3xxx_prm_init(void) diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h index bc37d42a8704..cfde3f4a03cc 100644 --- a/arch/arm/mach-omap2/prm3xxx.h +++ b/arch/arm/mach-omap2/prm3xxx.h @@ -144,22 +144,6 @@ extern u32 omap3_prm_vcvp_read(u8 offset); extern void omap3_prm_vcvp_write(u32 val, u8 offset); extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); -#ifdef CONFIG_ARCH_OMAP3 -void omap3xxx_prm_reconfigure_io_chain(void); -#else -static inline void omap3xxx_prm_reconfigure_io_chain(void) -{ -} -#endif - -/* PRM interrupt-related functions */ -extern void omap3xxx_prm_read_pending_irqs(unsigned long *events); -extern void omap3xxx_prm_ocp_barrier(void); -extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask); -extern void omap3xxx_prm_restore_irqen(u32 *saved_mask); - -extern void omap3xxx_prm_dpll3_reset(void); - extern int __init omap3xxx_prm_init(void); extern u32 omap3xxx_prm_get_reset_sources(void); int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits); diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 0958d070d3db..cc170fb81ff7 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -32,6 +32,12 @@ /* Static data */ +static void omap44xx_prm_read_pending_irqs(unsigned long *events); +static void omap44xx_prm_ocp_barrier(void); +static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask); +static void omap44xx_prm_restore_irqen(u32 *saved_mask); +static void omap44xx_prm_reconfigure_io_chain(void); + static const struct omap_prcm_irq omap4_prcm_irqs[] = { OMAP_PRCM_IRQ("io", 9, 1), }; @@ -80,19 +86,19 @@ static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = { /* PRM low-level functions */ /* Read a register in a CM/PRM instance in the PRM module */ -u32 omap4_prm_read_inst_reg(s16 inst, u16 reg) +static u32 omap4_prm_read_inst_reg(s16 inst, u16 reg) { return readl_relaxed(prm_base + inst + reg); } /* Write into a register in a CM/PRM instance in the PRM module */ -void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg) +static void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg) { writel_relaxed(val, prm_base + inst + reg); } /* Read-modify-write a register in a PRM module. Caller must lock */ -u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg) +static u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg) { u32 v; @@ -207,7 +213,7 @@ static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs) * MPU IRQs, and store the result into the two u32s pointed to by @events. * No return value. */ -void omap44xx_prm_read_pending_irqs(unsigned long *events) +static void omap44xx_prm_read_pending_irqs(unsigned long *events) { events[0] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_OFFSET, OMAP4_PRM_IRQSTATUS_MPU_OFFSET); @@ -224,7 +230,7 @@ void omap44xx_prm_read_pending_irqs(unsigned long *events) * block, to avoid race conditions after acknowledging or clearing IRQ * bits. No return value. */ -void omap44xx_prm_ocp_barrier(void) +static void omap44xx_prm_ocp_barrier(void) { omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_REVISION_PRM_OFFSET); @@ -241,7 +247,7 @@ void omap44xx_prm_ocp_barrier(void) * interrupts reaches the PRM before returning; otherwise, spurious * interrupts might occur. No return value. */ -void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) +static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) { saved_mask[0] = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, @@ -270,7 +276,7 @@ void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask) * No OCP barrier should be needed here; any pending PRM interrupts will fire * once the writes reach the PRM. No return value. */ -void omap44xx_prm_restore_irqen(u32 *saved_mask) +static void omap44xx_prm_restore_irqen(u32 *saved_mask) { omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_OCP_SOCKET_INST, OMAP4_PRM_IRQENABLE_MPU_OFFSET); @@ -287,7 +293,7 @@ void omap44xx_prm_restore_irqen(u32 *saved_mask) * deasserting WUCLKIN and waiting for WUCLKOUT to be deasserted. * No return value. XXX Are the final two steps necessary? */ -void omap44xx_prm_reconfigure_io_chain(void) +static void omap44xx_prm_reconfigure_io_chain(void) { int i = 0; s32 inst = omap4_prmst_get_prm_dev_inst(); @@ -652,11 +658,10 @@ static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm) static int omap4_check_vcvp(void) { - /* No VC/VP on dra7xx devices */ - if (soc_is_dra7xx()) - return 0; + if (prm_features & PRM_HAS_VOLTAGE) + return 1; - return 1; + return 0; } struct pwrdm_ops omap4_pwrdm_operations = { @@ -689,6 +694,10 @@ static struct prm_ll_data omap44xx_prm_ll_data = { .was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old, .clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old, .late_init = &omap44xx_prm_late_init, + .assert_hardreset = omap4_prminst_assert_hardreset, + .deassert_hardreset = omap4_prminst_deassert_hardreset, + .is_hardreset_asserted = omap4_prminst_is_hardreset_asserted, + .reset_system = omap4_prminst_global_warm_sw_reset, }; int __init omap44xx_prm_init(void) @@ -696,6 +705,9 @@ int __init omap44xx_prm_init(void) if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) prm_features |= PRM_HAS_IO_WAKEUP; + if (!soc_is_dra7xx()) + prm_features |= PRM_HAS_VOLTAGE; + return prm_register(&omap44xx_prm_ll_data); } diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h index 8d95aa543ef5..f7512515fde5 100644 --- a/arch/arm/mach-omap2/prm44xx_54xx.h +++ b/arch/arm/mach-omap2/prm44xx_54xx.h @@ -26,10 +26,6 @@ /* Function prototypes */ #ifndef __ASSEMBLER__ -extern u32 omap4_prm_read_inst_reg(s16 inst, u16 idx); -extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx); -extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); - /* OMAP4/OMAP5-specific VP functions */ u32 omap4_prm_vp_check_txdone(u8 vp_id); void omap4_prm_vp_clear_txdone(u8 vp_id); @@ -42,21 +38,6 @@ extern u32 omap4_prm_vcvp_read(u8 offset); extern void omap4_prm_vcvp_write(u32 val, u8 offset); extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); -#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) -void omap44xx_prm_reconfigure_io_chain(void); -#else -static inline void omap44xx_prm_reconfigure_io_chain(void) -{ -} -#endif - -/* PRM interrupt-related functions */ -extern void omap44xx_prm_read_pending_irqs(unsigned long *events); -extern void omap44xx_prm_ocp_barrier(void); -extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask); -extern void omap44xx_prm_restore_irqen(u32 *saved_mask); - extern int __init omap44xx_prm_init(void); extern u32 omap44xx_prm_get_reset_sources(void); diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index ee2b5222eac0..779940cb6e56 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -423,6 +423,105 @@ void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx) } /** + * omap_prm_assert_hardreset - assert hardreset for an IP block + * @shift: register bit shift corresponding to the reset line + * @part: PRM partition + * @prm_mod: PRM submodule base or instance offset + * @offset: register offset + * + * Asserts a hardware reset line for an IP block. + */ +int omap_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset) +{ + if (!prm_ll_data->assert_hardreset) { + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + return -EINVAL; + } + + return prm_ll_data->assert_hardreset(shift, part, prm_mod, offset); +} + +/** + * omap_prm_deassert_hardreset - deassert hardreset for an IP block + * @shift: register bit shift corresponding to the reset line + * @st_shift: reset status bit shift corresponding to the reset line + * @part: PRM partition + * @prm_mod: PRM submodule base or instance offset + * @offset: register offset + * @st_offset: status register offset + * + * Deasserts a hardware reset line for an IP block. + */ +int omap_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 prm_mod, + u16 offset, u16 st_offset) +{ + if (!prm_ll_data->deassert_hardreset) { + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + return -EINVAL; + } + + return prm_ll_data->deassert_hardreset(shift, st_shift, part, prm_mod, + offset, st_offset); +} + +/** + * omap_prm_is_hardreset_asserted - check the hardreset status for an IP block + * @shift: register bit shift corresponding to the reset line + * @part: PRM partition + * @prm_mod: PRM submodule base or instance offset + * @offset: register offset + * + * Checks if a hardware reset line for an IP block is enabled or not. + */ +int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset) +{ + if (!prm_ll_data->is_hardreset_asserted) { + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + return -EINVAL; + } + + return prm_ll_data->is_hardreset_asserted(shift, part, prm_mod, offset); +} + +/** + * omap_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain + * + * Clear any previously-latched I/O wakeup events and ensure that the + * I/O wakeup gates are aligned with the current mux settings. + * Calls SoC specific I/O chain reconfigure function if available, + * otherwise does nothing. + */ +void omap_prm_reconfigure_io_chain(void) +{ + if (!prcm_irq_setup || !prcm_irq_setup->reconfigure_io_chain) + return; + + prcm_irq_setup->reconfigure_io_chain(); +} + +/** + * omap_prm_reset_system - trigger global SW reset + * + * Triggers SoC specific global warm reset to reboot the device. + */ +void omap_prm_reset_system(void) +{ + if (!prm_ll_data->reset_system) { + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + return; + } + + prm_ll_data->reset_system(); + + while (1) + cpu_relax(); +} + +/** * prm_register - register per-SoC low-level data with the PRM * @pld: low-level per-SoC OMAP PRM data & function pointers to register * diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index 225e0258d76d..8adf7b1a1dce 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -148,8 +148,12 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst, /** * omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and * wait - * @rstctrl_reg: RM_RSTCTRL register address for this module * @shift: register bit shift corresponding to the reset line to deassert + * @st_shift: status bit offset, not used for OMAP4+ + * @part: PRM partition + * @inst: PRM instance offset + * @rstctrl_offs: reset register offset + * @st_offs: reset status register offset, not used for OMAP4+ * * Some IPs like dsp, ipu or iva contain processors that require an HW * reset line to be asserted / deasserted in order to fully enable the @@ -160,8 +164,8 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst, * -EINVAL upon an argument error, -EEXIST if the submodule was already out * of reset, or -EBUSY if the submodule did not exit reset promptly. */ -int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst, - u16 rstctrl_offs) +int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst, + u16 rstctrl_offs, u16 st_offs) { int c; u32 mask = 1 << shift; diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h index 583aa3774571..fb1c9d7a2f9d 100644 --- a/arch/arm/mach-omap2/prminst44xx.h +++ b/arch/arm/mach-omap2/prminst44xx.h @@ -30,8 +30,9 @@ extern int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst, u16 rstctrl_offs); extern int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst, u16 rstctrl_offs); -extern int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst, - u16 rstctrl_offs); +int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, + s16 inst, u16 rstctrl_offs, + u16 rstst_offs); extern void omap_prm_base_init(void); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index a388f8c1bcb3..57dee0c7cd2b 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -263,9 +263,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, omap_up.dma_rx_timeout = info->dma_rx_timeout; omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate; omap_up.autosuspend_timeout = info->autosuspend_timeout; - omap_up.DTR_gpio = info->DTR_gpio; - omap_up.DTR_inverted = info->DTR_inverted; - omap_up.DTR_present = info->DTR_present; pdata = &omap_up; pdata_size = sizeof(struct omap_uart_port_info); |