summaryrefslogtreecommitdiff
path: root/arch/arm/mach-pnx4008
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pnx4008')
-rw-r--r--arch/arm/mach-pnx4008/Makefile12
-rw-r--r--arch/arm/mach-pnx4008/Makefile.boot4
-rw-r--r--arch/arm/mach-pnx4008/clock.c1010
-rw-r--r--arch/arm/mach-pnx4008/clock.h43
-rw-r--r--arch/arm/mach-pnx4008/core.c207
-rw-r--r--arch/arm/mach-pnx4008/dma.c1109
-rw-r--r--arch/arm/mach-pnx4008/gpio.c330
-rw-r--r--arch/arm/mach-pnx4008/irq.c121
-rw-r--r--arch/arm/mach-pnx4008/pm.c184
-rw-r--r--arch/arm/mach-pnx4008/serial.c69
-rw-r--r--arch/arm/mach-pnx4008/sleep.S196
-rw-r--r--arch/arm/mach-pnx4008/time.c141
12 files changed, 3426 insertions, 0 deletions
diff --git a/arch/arm/mach-pnx4008/Makefile b/arch/arm/mach-pnx4008/Makefile
new file mode 100644
index 000000000000..b457ca0a431a
--- /dev/null
+++ b/arch/arm/mach-pnx4008/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o
+obj-m :=
+obj-n :=
+obj- :=
+
+# Power Management
+obj-$(CONFIG_PM) += pm.o sleep.o
+
diff --git a/arch/arm/mach-pnx4008/Makefile.boot b/arch/arm/mach-pnx4008/Makefile.boot
new file mode 100644
index 000000000000..44c7117e20dd
--- /dev/null
+++ b/arch/arm/mach-pnx4008/Makefile.boot
@@ -0,0 +1,4 @@
+ zreladdr-y := 0x80008000
+params_phys-y := 0x80000100
+initrd_phys-y := 0x80800000
+
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
new file mode 100644
index 000000000000..285b22f631e9
--- /dev/null
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -0,0 +1,1010 @@
+/*
+ * arch/arm/mach-pnx4008/clock.c
+ *
+ * Clock control driver for PNX4008
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ * Generic clock management functions are partially based on:
+ * linux/arch/arm/mach-omap/clock.c
+ *
+ * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+
+#include <asm/semaphore.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/clock.h>
+#include "clock.h"
+
+/*forward declaration*/
+static struct clk per_ck;
+static struct clk hclk_ck;
+static struct clk ck_1MHz;
+static struct clk ck_13MHz;
+static struct clk ck_pll1;
+static int local_set_rate(struct clk *clk, u32 rate);
+
+static inline void clock_lock(void)
+{
+ local_irq_disable();
+}
+
+static inline void clock_unlock(void)
+{
+ local_irq_enable();
+}
+
+static void propagate_rate(struct clk *clk)
+{
+ struct clk *tmp_clk;
+
+ tmp_clk = clk;
+ while (tmp_clk->propagate_next) {
+ tmp_clk = tmp_clk->propagate_next;
+ local_set_rate(tmp_clk, tmp_clk->user_rate);
+ }
+}
+
+static inline void clk_reg_disable(struct clk *clk)
+{
+ if (clk->enable_reg)
+ __raw_writel(__raw_readl(clk->enable_reg) &
+ ~(1 << clk->enable_shift), clk->enable_reg);
+}
+
+static inline void clk_reg_enable(struct clk *clk)
+{
+ if (clk->enable_reg)
+ __raw_writel(__raw_readl(clk->enable_reg) |
+ (1 << clk->enable_shift), clk->enable_reg);
+}
+
+static inline void clk_reg_disable1(struct clk *clk)
+{
+ if (clk->enable_reg1)
+ __raw_writel(__raw_readl(clk->enable_reg1) &
+ ~(1 << clk->enable_shift1), clk->enable_reg1);
+}
+
+static inline void clk_reg_enable1(struct clk *clk)
+{
+ if (clk->enable_reg1)
+ __raw_writel(__raw_readl(clk->enable_reg1) |
+ (1 << clk->enable_shift1), clk->enable_reg1);
+}
+
+static int clk_wait_for_pll_lock(struct clk *clk)
+{
+ int i;
+ i = 0;
+ while (i++ < 0xFFF && !(__raw_readl(clk->scale_reg) & 1)) ; /*wait for PLL to lock */
+
+ if (!(__raw_readl(clk->scale_reg) & 1)) {
+ printk(KERN_ERR
+ "%s ERROR: failed to lock, scale reg data: %x\n",
+ clk->name, __raw_readl(clk->scale_reg));
+ return -1;
+ }
+ return 0;
+}
+
+static int switch_to_dirty_13mhz(struct clk *clk)
+{
+ int i;
+ int ret;
+ u32 tmp_reg;
+
+ ret = 0;
+
+ if (!clk->rate)
+ clk_reg_enable1(clk);
+
+ tmp_reg = __raw_readl(clk->parent_switch_reg);
+ /*if 13Mhz clock selected, select 13'MHz (dirty) source from OSC */
+ if (!(tmp_reg & 1)) {
+ tmp_reg |= (1 << 1); /* Trigger switch to 13'MHz (dirty) clock */
+ __raw_writel(tmp_reg, clk->parent_switch_reg);
+ i = 0;
+ while (i++ < 0xFFF && !(__raw_readl(clk->parent_switch_reg) & 1)) ; /*wait for 13'MHz selection status */
+
+ if (!(__raw_readl(clk->parent_switch_reg) & 1)) {
+ printk(KERN_ERR
+ "%s ERROR: failed to select 13'MHz, parent sw reg data: %x\n",
+ clk->name, __raw_readl(clk->parent_switch_reg));
+ ret = -1;
+ }
+ }
+
+ if (!clk->rate)
+ clk_reg_disable1(clk);
+
+ return ret;
+}
+
+static int switch_to_clean_13mhz(struct clk *clk)
+{
+ int i;
+ int ret;
+ u32 tmp_reg;
+
+ ret = 0;
+
+ if (!clk->rate)
+ clk_reg_enable1(clk);
+
+ tmp_reg = __raw_readl(clk->parent_switch_reg);
+ /*if 13'Mhz clock selected, select 13MHz (clean) source from OSC */
+ if (tmp_reg & 1) {
+ tmp_reg &= ~(1 << 1); /* Trigger switch to 13MHz (clean) clock */
+ __raw_writel(tmp_reg, clk->parent_switch_reg);
+ i = 0;
+ while (i++ < 0xFFF && (__raw_readl(clk->parent_switch_reg) & 1)) ; /*wait for 13MHz selection status */
+
+ if (__raw_readl(clk->parent_switch_reg) & 1) {
+ printk(KERN_ERR
+ "%s ERROR: failed to select 13MHz, parent sw reg data: %x\n",
+ clk->name, __raw_readl(clk->parent_switch_reg));
+ ret = -1;
+ }
+ }
+
+ if (!clk->rate)
+ clk_reg_disable1(clk);
+
+ return ret;
+}
+
+static int set_13MHz_parent(struct clk *clk, struct clk *parent)
+{
+ int ret = -EINVAL;
+
+ if (parent == &ck_13MHz)
+ ret = switch_to_clean_13mhz(clk);
+ else if (parent == &ck_pll1)
+ ret = switch_to_dirty_13mhz(clk);
+
+ return ret;
+}
+
+#define PLL160_MIN_FCCO 156000
+#define PLL160_MAX_FCCO 320000
+
+/*
+ * Calculate pll160 settings.
+ * Possible input: up to 320MHz with step of clk->parent->rate.
+ * In PNX4008 parent rate for pll160s may be either 1 or 13MHz.
+ * Ignored paths: "feedback" (bit 13 set), "div-by-N".
+ * Setting ARM PLL4 rate to 0 will put CPU into direct run mode.
+ * Setting PLL5 and PLL3 rate to 0 will disable USB and DSP clock input.
+ * Please refer to PNX4008 IC manual for details.
+ */
+
+static int pll160_set_rate(struct clk *clk, u32 rate)
+{
+ u32 tmp_reg, tmp_m, tmp_2p, i;
+ u32 parent_rate;
+ int ret = -EINVAL;
+
+ parent_rate = clk->parent->rate;
+
+ if (!parent_rate)
+ goto out;
+
+ /* set direct run for ARM or disable output for others */
+ clk_reg_disable(clk);
+
+ /* disable source input as well (ignored for ARM) */
+ clk_reg_disable1(clk);
+
+ tmp_reg = __raw_readl(clk->scale_reg);
+ tmp_reg &= ~0x1ffff; /*clear all settings, power down */
+ __raw_writel(tmp_reg, clk->scale_reg);
+
+ rate -= rate % parent_rate; /*round down the input */
+
+ if (rate > PLL160_MAX_FCCO)
+ rate = PLL160_MAX_FCCO;
+
+ if (!rate) {
+ clk->rate = 0;
+ ret = 0;
+ goto out;
+ }
+
+ clk_reg_enable1(clk);
+ tmp_reg = __raw_readl(clk->scale_reg);
+
+ if (rate == parent_rate) {
+ /*enter direct bypass mode */
+ tmp_reg |= ((1 << 14) | (1 << 15));
+ __raw_writel(tmp_reg, clk->scale_reg);
+ clk->rate = parent_rate;
+ clk_reg_enable(clk);
+ ret = 0;
+ goto out;
+ }
+
+ i = 0;
+ for (tmp_2p = 1; tmp_2p < 16; tmp_2p <<= 1) {
+ if (rate * tmp_2p >= PLL160_MIN_FCCO)
+ break;
+ i++;
+ }
+
+ if (tmp_2p > 1)
+ tmp_reg |= ((i - 1) << 11);
+ else
+ tmp_reg |= (1 << 14); /*direct mode, no divide */
+
+ tmp_m = rate * tmp_2p;
+ tmp_m /= parent_rate;
+
+ tmp_reg |= (tmp_m - 1) << 1; /*calculate M */
+ tmp_reg |= (1 << 16); /*power up PLL */
+ __raw_writel(tmp_reg, clk->scale_reg);
+
+ if (clk_wait_for_pll_lock(clk) < 0) {
+ clk_reg_disable(clk);
+ clk_reg_disable1(clk);
+
+ tmp_reg = __raw_readl(clk->scale_reg);
+ tmp_reg &= ~0x1ffff; /*clear all settings, power down */
+ __raw_writel(tmp_reg, clk->scale_reg);
+ clk->rate = 0;
+ ret = -EFAULT;
+ goto out;
+ }
+
+ clk->rate = (tmp_m * parent_rate) / tmp_2p;
+
+ if (clk->flags & RATE_PROPAGATES)
+ propagate_rate(clk);
+
+ clk_reg_enable(clk);
+ ret = 0;
+
+out:
+ return ret;
+}
+
+/*configure PER_CLK*/
+static int per_clk_set_rate(struct clk *clk, u32 rate)
+{
+ u32 tmp;
+
+ tmp = __raw_readl(clk->scale_reg);
+ tmp &= ~(0x1f << 2);
+ tmp |= ((clk->parent->rate / clk->rate) - 1) << 2;
+ __raw_writel(tmp, clk->scale_reg);
+ clk->rate = rate;
+ return 0;
+}
+
+/*configure HCLK*/
+static int hclk_set_rate(struct clk *clk, u32 rate)
+{
+ u32 tmp;
+ tmp = __raw_readl(clk->scale_reg);
+ tmp = tmp & ~0x3;
+ switch (rate) {
+ case 1:
+ break;
+ case 2:
+ tmp |= 1;
+ break;
+ case 4:
+ tmp |= 2;
+ break;
+ }
+
+ __raw_writel(tmp, clk->scale_reg);
+ clk->rate = rate;
+ return 0;
+}
+
+static u32 hclk_round_rate(struct clk *clk, u32 rate)
+{
+ switch (rate) {
+ case 1:
+ case 4:
+ return rate;
+ }
+ return 2;
+}
+
+static u32 per_clk_round_rate(struct clk *clk, u32 rate)
+{
+ return CLK_RATE_13MHZ;
+}
+
+static int on_off_set_rate(struct clk *clk, u32 rate)
+{
+ if (rate) {
+ clk_reg_enable(clk);
+ clk->rate = 1;
+ } else {
+ clk_reg_disable(clk);
+ clk->rate = 0;
+ }
+ return 0;
+}
+
+static int on_off_inv_set_rate(struct clk *clk, u32 rate)
+{
+ if (rate) {
+ clk_reg_disable(clk); /*enable bit is inverted */
+ clk->rate = 1;
+ } else {
+ clk_reg_enable(clk);
+ clk->rate = 0;
+ }
+ return 0;
+}
+
+static u32 on_off_round_rate(struct clk *clk, u32 rate)
+{
+ return (rate ? 1 : 0);
+}
+
+static u32 pll4_round_rate(struct clk *clk, u32 rate)
+{
+ if (rate > CLK_RATE_208MHZ)
+ rate = CLK_RATE_208MHZ;
+ if (rate == CLK_RATE_208MHZ && hclk_ck.user_rate == 1)
+ rate = CLK_RATE_208MHZ - CLK_RATE_13MHZ;
+ return (rate - (rate % (hclk_ck.user_rate * CLK_RATE_13MHZ)));
+}
+
+static u32 pll3_round_rate(struct clk *clk, u32 rate)
+{
+ if (rate > CLK_RATE_208MHZ)
+ rate = CLK_RATE_208MHZ;
+ return (rate - rate % CLK_RATE_13MHZ);
+}
+
+static u32 pll5_round_rate(struct clk *clk, u32 rate)
+{
+ return (rate ? CLK_RATE_48MHZ : 0);
+}
+
+static u32 ck_13MHz_round_rate(struct clk *clk, u32 rate)
+{
+ return (rate ? CLK_RATE_13MHZ : 0);
+}
+
+static int ck_13MHz_set_rate(struct clk *clk, u32 rate)
+{
+ if (rate) {
+ clk_reg_disable(clk); /*enable bit is inverted */
+ udelay(500);
+ clk->rate = CLK_RATE_13MHZ;
+ ck_1MHz.rate = CLK_RATE_1MHZ;
+ } else {
+ clk_reg_enable(clk);
+ clk->rate = 0;
+ ck_1MHz.rate = 0;
+ }
+ return 0;
+}
+
+static int pll1_set_rate(struct clk *clk, u32 rate)
+{
+#if 0 /* doesn't work on some boards, probably a HW BUG */
+ if (rate) {
+ clk_reg_disable(clk); /*enable bit is inverted */
+ if (!clk_wait_for_pll_lock(clk)) {
+ clk->rate = CLK_RATE_13MHZ;
+ } else {
+ clk_reg_enable(clk);
+ clk->rate = 0;
+ }
+
+ } else {
+ clk_reg_enable(clk);
+ clk->rate = 0;
+ }
+#endif
+ return 0;
+}
+
+/* Clock sources */
+
+static struct clk osc_13MHz = {
+ .name = "osc_13MHz",
+ .flags = FIXED_RATE,
+ .rate = CLK_RATE_13MHZ,
+};
+
+static struct clk ck_13MHz = {
+ .name = "ck_13MHz",
+ .parent = &osc_13MHz,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &ck_13MHz_round_rate,
+ .set_rate = &ck_13MHz_set_rate,
+ .enable_reg = OSC13CTRL_REG,
+ .enable_shift = 0,
+ .rate = CLK_RATE_13MHZ,
+};
+
+static struct clk osc_32KHz = {
+ .name = "osc_32KHz",
+ .flags = FIXED_RATE,
+ .rate = CLK_RATE_32KHZ,
+};
+
+/*attached to PLL5*/
+static struct clk ck_1MHz = {
+ .name = "ck_1MHz",
+ .flags = FIXED_RATE | PARENT_SET_RATE,
+ .parent = &ck_13MHz,
+};
+
+/* PLL1 (397) - provides 13' MHz clock */
+static struct clk ck_pll1 = {
+ .name = "ck_pll1",
+ .parent = &osc_32KHz,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &ck_13MHz_round_rate,
+ .set_rate = &pll1_set_rate,
+ .enable_reg = PLLCTRL_REG,
+ .enable_shift = 1,
+ .scale_reg = PLLCTRL_REG,
+ .rate = CLK_RATE_13MHZ,
+};
+
+/* CPU/Bus PLL */
+static struct clk ck_pll4 = {
+ .name = "ck_pll4",
+ .parent = &ck_pll1,
+ .flags = RATE_PROPAGATES | NEEDS_INITIALIZATION,
+ .propagate_next = &per_ck,
+ .round_rate = &pll4_round_rate,
+ .set_rate = &pll160_set_rate,
+ .rate = CLK_RATE_208MHZ,
+ .scale_reg = HCLKPLLCTRL_REG,
+ .enable_reg = PWRCTRL_REG,
+ .enable_shift = 2,
+ .parent_switch_reg = SYSCLKCTRL_REG,
+ .set_parent = &set_13MHz_parent,
+};
+
+/* USB PLL */
+static struct clk ck_pll5 = {
+ .name = "ck_pll5",
+ .parent = &ck_1MHz,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &pll5_round_rate,
+ .set_rate = &pll160_set_rate,
+ .scale_reg = USBCTRL_REG,
+ .enable_reg = USBCTRL_REG,
+ .enable_shift = 18,
+ .enable_reg1 = USBCTRL_REG,
+ .enable_shift1 = 17,
+};
+
+/* XPERTTeak DSP PLL */
+static struct clk ck_pll3 = {
+ .name = "ck_pll3",
+ .parent = &ck_pll1,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &pll3_round_rate,
+ .set_rate = &pll160_set_rate,
+ .scale_reg = DSPPLLCTRL_REG,
+ .enable_reg = DSPCLKCTRL_REG,
+ .enable_shift = 3,
+ .enable_reg1 = DSPCLKCTRL_REG,
+ .enable_shift1 = 2,
+ .parent_switch_reg = DSPCLKCTRL_REG,
+ .set_parent = &set_13MHz_parent,
+};
+
+static struct clk hclk_ck = {
+ .name = "hclk_ck",
+ .parent = &ck_pll4,
+ .flags = PARENT_SET_RATE,
+ .set_rate = &hclk_set_rate,
+ .round_rate = &hclk_round_rate,
+ .scale_reg = HCLKDIVCTRL_REG,
+ .rate = 2,
+ .user_rate = 2,
+};
+
+static struct clk per_ck = {
+ .name = "per_ck",
+ .parent = &ck_pll4,
+ .flags = FIXED_RATE,
+ .propagate_next = &hclk_ck,
+ .set_rate = &per_clk_set_rate,
+ .round_rate = &per_clk_round_rate,
+ .scale_reg = HCLKDIVCTRL_REG,
+ .rate = CLK_RATE_13MHZ,
+ .user_rate = CLK_RATE_13MHZ,
+};
+
+static struct clk m2hclk_ck = {
+ .name = "m2hclk_ck",
+ .parent = &hclk_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_inv_set_rate,
+ .rate = 1,
+ .enable_shift = 6,
+ .enable_reg = PWRCTRL_REG,
+};
+
+static struct clk vfp9_ck = {
+ .name = "vfp9_ck",
+ .parent = &ck_pll4,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .rate = 1,
+ .enable_shift = 4,
+ .enable_reg = VFP9CLKCTRL_REG,
+};
+
+static struct clk keyscan_ck = {
+ .name = "keyscan_ck",
+ .parent = &osc_32KHz,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 0,
+ .enable_reg = KEYCLKCTRL_REG,
+};
+
+static struct clk touch_ck = {
+ .name = "touch_ck",
+ .parent = &osc_32KHz,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 0,
+ .enable_reg = TSCLKCTRL_REG,
+};
+
+static struct clk pwm1_ck = {
+ .name = "pwm1_ck",
+ .parent = &osc_32KHz,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 0,
+ .enable_reg = PWMCLKCTRL_REG,
+};
+
+static struct clk pwm2_ck = {
+ .name = "pwm2_ck",
+ .parent = &osc_32KHz,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 2,
+ .enable_reg = PWMCLKCTRL_REG,
+};
+
+static struct clk jpeg_ck = {
+ .name = "jpeg_ck",
+ .parent = &hclk_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 0,
+ .enable_reg = JPEGCLKCTRL_REG,
+};
+
+static struct clk ms_ck = {
+ .name = "ms_ck",
+ .parent = &ck_pll4,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 5,
+ .enable_reg = MSCTRL_REG,
+};
+
+static struct clk dum_ck = {
+ .name = "dum_ck",
+ .parent = &hclk_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 0,
+ .enable_reg = DUMCLKCTRL_REG,
+};
+
+static struct clk flash_ck = {
+ .name = "flash_ck",
+ .parent = &hclk_ck,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 1, /* Only MLC clock supported */
+ .enable_reg = FLASHCLKCTRL_REG,
+};
+
+static struct clk i2c0_ck = {
+ .name = "i2c0_ck",
+ .parent = &per_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 0,
+ .enable_reg = I2CCLKCTRL_REG,
+};
+
+static struct clk i2c1_ck = {
+ .name = "i2c1_ck",
+ .parent = &per_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 1,
+ .enable_reg = I2CCLKCTRL_REG,
+};
+
+static struct clk i2c2_ck = {
+ .name = "i2c2_ck",
+ .parent = &per_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 2,
+ .enable_reg = USB_OTG_CLKCTRL_REG,
+};
+
+static struct clk spi0_ck = {
+ .name = "spi0_ck",
+ .parent = &hclk_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 0,
+ .enable_reg = SPICTRL_REG,
+};
+
+static struct clk spi1_ck = {
+ .name = "spi1_ck",
+ .parent = &hclk_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 4,
+ .enable_reg = SPICTRL_REG,
+};
+
+static struct clk dma_ck = {
+ .name = "dma_ck",
+ .parent = &hclk_ck,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 0,
+ .enable_reg = DMACLKCTRL_REG,
+};
+
+static struct clk uart3_ck = {
+ .name = "uart3_ck",
+ .parent = &per_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .rate = 1,
+ .enable_shift = 0,
+ .enable_reg = UARTCLKCTRL_REG,
+};
+
+static struct clk uart4_ck = {
+ .name = "uart4_ck",
+ .parent = &per_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 1,
+ .enable_reg = UARTCLKCTRL_REG,
+};
+
+static struct clk uart5_ck = {
+ .name = "uart5_ck",
+ .parent = &per_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .rate = 1,
+ .enable_shift = 2,
+ .enable_reg = UARTCLKCTRL_REG,
+};
+
+static struct clk uart6_ck = {
+ .name = "uart6_ck",
+ .parent = &per_ck,
+ .flags = NEEDS_INITIALIZATION,
+ .round_rate = &on_off_round_rate,
+ .set_rate = &on_off_set_rate,
+ .enable_shift = 3,
+ .enable_reg = UARTCLKCTRL_REG,
+};
+
+/* These clocks are visible outside this module
+ * and can be initialized
+ */
+static struct clk *onchip_clks[] = {
+ &ck_13MHz,
+ &ck_pll1,
+ &ck_pll4,
+ &ck_pll5,
+ &ck_pll3,
+ &vfp9_ck,
+ &m2hclk_ck,
+ &hclk_ck,
+ &dma_ck,
+ &flash_ck,
+ &dum_ck,
+ &keyscan_ck,
+ &pwm1_ck,
+ &pwm2_ck,
+ &jpeg_ck,
+ &ms_ck,
+ &touch_ck,
+ &i2c0_ck,
+ &i2c1_ck,
+ &i2c2_ck,
+ &spi0_ck,
+ &spi1_ck,
+ &uart3_ck,
+ &uart4_ck,
+ &uart5_ck,
+ &uart6_ck,
+};
+
+static int local_set_rate(struct clk *clk, u32 rate)
+{
+ int ret = -EINVAL;
+ if (clk->set_rate) {
+
+ if (clk->user_rate == clk->rate && clk->parent->rate) {
+ /* if clock enabled or rate not set */
+ clk->user_rate = clk->round_rate(clk, rate);
+ ret = clk->set_rate(clk, clk->user_rate);
+ } else
+ clk->user_rate = clk->round_rate(clk, rate);
+ ret = 0;
+ }
+ return ret;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ int ret = -EINVAL;
+
+ if (clk->flags & FIXED_RATE)
+ goto out;
+
+ clock_lock();
+ if ((clk->flags & PARENT_SET_RATE) && clk->parent) {
+
+ clk->user_rate = clk->round_rate(clk, rate);
+ /* parent clock needs to be refreshed
+ for the setting to take effect */
+ } else {
+ ret = local_set_rate(clk, rate);
+ }
+ ret = 0;
+ clock_unlock();
+
+out:
+ return ret;
+}
+
+EXPORT_SYMBOL(clk_set_rate);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ struct clk *clk = ERR_PTR(-ENOENT);
+ struct clk **clkp;
+
+ clock_lock();
+ for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
+ clkp++) {
+ if (strcmp(id, (*clkp)->name) == 0
+ && try_module_get((*clkp)->owner)) {
+ clk = (*clkp);
+ break;
+ }
+ }
+ clock_unlock();
+
+ return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+ clock_lock();
+ if (clk && !IS_ERR(clk))
+ module_put(clk->owner);
+ clock_unlock();
+}
+EXPORT_SYMBOL(clk_put);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long ret;
+ clock_lock();
+ ret = clk->rate;
+ clock_unlock();
+ return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+static int local_clk_enable(struct clk *clk)
+{
+ int ret = 0;
+
+ if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate
+ && clk->user_rate)
+ ret = clk->set_rate(clk, clk->user_rate);
+ return ret;
+}
+
+static void local_clk_disable(struct clk *clk)
+{
+ if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate)
+ clk->set_rate(clk, 0);
+}
+
+int clk_enable(struct clk *clk)
+{
+ int ret = 0;
+
+ clock_lock();
+ ret = local_clk_enable(clk);
+ clock_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ clock_lock();
+ local_clk_disable(clk);
+ clock_unlock();
+}
+
+EXPORT_SYMBOL(clk_disable);
+
+static void local_clk_unuse(struct clk *clk)
+{
+ if (clk->usecount > 0 && !(--clk->usecount)) {
+ local_clk_disable(clk);
+ if (clk->parent)
+ local_clk_unuse(clk->parent);
+ }
+}
+
+static int local_clk_use(struct clk *clk)
+{
+ int ret = 0;
+ if (clk->usecount++ == 0) {
+ if (clk->parent)
+ ret = local_clk_use(clk->parent);
+
+ if (ret != 0) {
+ clk->usecount--;
+ goto out;
+ }
+
+ ret = local_clk_enable(clk);
+
+ if (ret != 0 && clk->parent) {
+ local_clk_unuse(clk->parent);
+ clk->usecount--;
+ }
+ }
+out:
+ return ret;
+}
+
+/* The main purpose of clk_use ans clk_unuse functions
+ * is to control switching 13MHz oscillator and PLL1 (13'MHz),
+ * so that they are disabled whenever none of PLL2-5 is using them.
+ * Although in theory these functions should work with any clock,
+ * please use them only on PLL2 - PLL5 to avoid confusion.
+ */
+int clk_use(struct clk *clk)
+{
+ int ret = 0;
+
+ clock_lock();
+ ret = local_clk_use(clk);
+ clock_unlock();
+ return ret;
+}
+EXPORT_SYMBOL(clk_use);
+
+void clk_unuse(struct clk *clk)
+{
+
+ clock_lock();
+ local_clk_unuse(clk);
+ clock_unlock();
+}
+
+EXPORT_SYMBOL(clk_unuse);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ long ret;
+ clock_lock();
+ if (clk->round_rate)
+ ret = clk->round_rate(clk, rate);
+ else
+ ret = clk->rate;
+ clock_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ int ret = -ENODEV;
+ if (!clk->set_parent)
+ goto out;
+
+ clock_lock();
+ ret = clk->set_parent(clk, parent);
+ if (!ret)
+ clk->parent = parent;
+ clock_unlock();
+
+out:
+ return ret;
+}
+
+EXPORT_SYMBOL(clk_set_parent);
+
+static int __init clk_init(void)
+{
+ struct clk **clkp;
+
+ /* Disable autoclocking, as it doesn't seem to work */
+ __raw_writel(0xff, AUTOCLK_CTRL);
+
+ for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
+ clkp++) {
+ if (((*clkp)->flags & NEEDS_INITIALIZATION)
+ && ((*clkp)->set_rate)) {
+ (*clkp)->user_rate = (*clkp)->rate;
+ local_set_rate((*clkp), (*clkp)->user_rate);
+ if ((*clkp)->set_parent)
+ (*clkp)->set_parent((*clkp), (*clkp)->parent);
+ }
+ pr_debug("%s: clock %s, rate %ld\n",
+ __FUNCTION__, (*clkp)->name, (*clkp)->rate);
+ }
+
+ clk_use(&ck_pll4);
+
+ /* if ck_13MHz is not used, disable it. */
+ if (ck_13MHz.usecount == 0)
+ local_clk_disable(&ck_13MHz);
+
+ /* Disable autoclocking */
+ __raw_writeb(0xff, AUTOCLK_CTRL);
+
+ return 0;
+}
+
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-pnx4008/clock.h b/arch/arm/mach-pnx4008/clock.h
new file mode 100644
index 000000000000..cd58f372cfd0
--- /dev/null
+++ b/arch/arm/mach-pnx4008/clock.h
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/mach-pnx4008/clock.h
+ *
+ * Clock control driver for PNX4008 - internal header file
+ *
+ * Author: Vitaly Wool <source@mvista.com>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ARCH_ARM_PNX4008_CLOCK_H__
+#define __ARCH_ARM_PNX4008_CLOCK_H__
+
+struct clk {
+ struct list_head node;
+ struct module *owner;
+ const char *name;
+ struct clk *parent;
+ struct clk *propagate_next;
+ u32 rate;
+ u32 user_rate;
+ s8 usecount;
+ u32 flags;
+ u32 scale_reg;
+ u8 enable_shift;
+ u32 enable_reg;
+ u8 enable_shift1;
+ u32 enable_reg1;
+ u32 parent_switch_reg;
+ u32(*round_rate) (struct clk *, u32);
+ int (*set_rate) (struct clk *, u32);
+ int (*set_parent) (struct clk * clk, struct clk * parent);
+};
+
+/* Flags */
+#define RATE_PROPAGATES (1<<0)
+#define NEEDS_INITIALIZATION (1<<1)
+#define PARENT_SET_RATE (1<<2)
+#define FIXED_RATE (1<<3)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
new file mode 100644
index 000000000000..ba91daad64fb
--- /dev/null
+++ b/arch/arm/mach-pnx4008/core.c
@@ -0,0 +1,207 @@
+/*
+ * arch/arm/mach-pnx4008/core.c
+ *
+ * PNX4008 core startup code
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev,
+ * Grigory Tolstolytkin, Dmitry Pervushin <source@mvista.com>
+ *
+ * Based on reference code received from Philips:
+ * Copyright (C) 2003 Philips Semiconductors
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/serial_8250.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/system.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <asm/arch/irq.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dma.h>
+
+struct resource spipnx_0_resources[] = {
+ {
+ .start = PNX4008_SPI1_BASE,
+ .end = PNX4008_SPI1_BASE + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = PER_SPI1_REC_XMIT,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .start = SPI1_INT,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .flags = 0,
+ },
+};
+
+struct resource spipnx_1_resources[] = {
+ {
+ .start = PNX4008_SPI2_BASE,
+ .end = PNX4008_SPI2_BASE + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = PER_SPI2_REC_XMIT,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .start = SPI2_INT,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+ {
+ .modalias = "m25p80",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ },
+};
+
+static struct platform_device spipnx_1 = {
+ .name = "spipnx",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(spipnx_0_resources),
+ .resource = spipnx_0_resources,
+ .dev = {
+ .coherent_dma_mask = 0xFFFFFFFF,
+ },
+};
+
+static struct platform_device spipnx_2 = {
+ .name = "spipnx",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(spipnx_1_resources),
+ .resource = spipnx_1_resources,
+ .dev = {
+ .coherent_dma_mask = 0xFFFFFFFF,
+ },
+};
+
+static struct plat_serial8250_port platform_serial_ports[] = {
+ {
+ .membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART5_BASE)),
+ .mapbase = (unsigned long)PNX4008_UART5_BASE,
+ .irq = IIR5_INT,
+ .uartclk = PNX4008_UART_CLK,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
+ },
+ {
+ .membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART3_BASE)),
+ .mapbase = (unsigned long)PNX4008_UART3_BASE,
+ .irq = IIR3_INT,
+ .uartclk = PNX4008_UART_CLK,
+ .regshift = 2,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
+ },
+ {}
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = &platform_serial_ports,
+ },
+};
+
+static struct platform_device *devices[] __initdata = {
+ &spipnx_1,
+ &spipnx_2,
+ &serial_device,
+};
+
+
+extern void pnx4008_uart_init(void);
+
+static void __init pnx4008_init(void)
+{
+ /*disable all START interrupt sources,
+ and clear all START interrupt flags */
+ __raw_writel(0, START_INT_ER_REG(SE_PIN_BASE_INT));
+ __raw_writel(0, START_INT_ER_REG(SE_INT_BASE_INT));
+ __raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
+ __raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+ /* Switch on the UART clocks */
+ pnx4008_uart_init();
+}
+
+static struct map_desc pnx4008_io_desc[] __initdata = {
+ {
+ .virtual = IO_ADDRESS(PNX4008_IRAM_BASE),
+ .pfn = __phys_to_pfn(PNX4008_IRAM_BASE),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(PNX4008_NDF_FLASH_BASE),
+ .pfn = __phys_to_pfn(PNX4008_NDF_FLASH_BASE),
+ .length = SZ_1M - SZ_128K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(PNX4008_JPEG_CONFIG_BASE),
+ .pfn = __phys_to_pfn(PNX4008_JPEG_CONFIG_BASE),
+ .length = SZ_128K * 3,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(PNX4008_DMA_CONFIG_BASE),
+ .pfn = __phys_to_pfn(PNX4008_DMA_CONFIG_BASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(PNX4008_AHB2FAB_BASE),
+ .pfn = __phys_to_pfn(PNX4008_AHB2FAB_BASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init pnx4008_map_io(void)
+{
+ iotable_init(pnx4008_io_desc, ARRAY_SIZE(pnx4008_io_desc));
+}
+
+extern struct sys_timer pnx4008_timer;
+
+MACHINE_START(PNX4008, "Philips PNX4008")
+ /* Maintainer: MontaVista Software Inc. */
+ .phys_io = 0x40090000,
+ .io_pg_offst = (0xf4090000 >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = pnx4008_map_io,
+ .init_irq = pnx4008_init_irq,
+ .init_machine = pnx4008_init,
+ .timer = &pnx4008_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
new file mode 100644
index 000000000000..981aa9dcdede
--- /dev/null
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -0,0 +1,1109 @@
+/*
+ * linux/arch/arm/mach-pnx4008/dma.c
+ *
+ * PNX4008 DMA registration and IRQ dispatching
+ *
+ * Author: Vitaly Wool
+ * Copyright: MontaVista Software Inc. (c) 2005
+ *
+ * Based on the code from Nicolas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/dma.h>
+#include <asm/dma-mapping.h>
+#include <asm/io.h>
+#include <asm/mach/dma.h>
+#include <asm/arch/clock.h>
+
+static struct dma_channel {
+ char *name;
+ void (*irq_handler) (int, int, void *, struct pt_regs *);
+ void *data;
+ struct pnx4008_dma_ll *ll;
+ u32 ll_dma;
+ void *target_addr;
+ int target_id;
+} dma_channels[MAX_DMA_CHANNELS];
+
+static struct ll_pool {
+ void *vaddr;
+ void *cur;
+ dma_addr_t dma_addr;
+ int count;
+} ll_pool;
+
+static spinlock_t ll_lock = SPIN_LOCK_UNLOCKED;
+
+struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t * ll_dma)
+{
+ struct pnx4008_dma_ll *ll = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ll_lock, flags);
+ if (ll_pool.count > 4) { /* can give one more */
+ ll = *(struct pnx4008_dma_ll **) ll_pool.cur;
+ *ll_dma = ll_pool.dma_addr + ((void *)ll - ll_pool.vaddr);
+ *(void **)ll_pool.cur = **(void ***)ll_pool.cur;
+ memset(ll, 0, sizeof(*ll));
+ ll_pool.count--;
+ }
+ spin_unlock_irqrestore(&ll_lock, flags);
+
+ return ll;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_alloc_ll_entry);
+
+void pnx4008_free_ll_entry(struct pnx4008_dma_ll * ll, dma_addr_t ll_dma)
+{
+ unsigned long flags;
+
+ if (ll) {
+ if ((unsigned long)((long)ll - (long)ll_pool.vaddr) > 0x4000) {
+ printk(KERN_ERR "Trying to free entry not allocated by DMA\n");
+ BUG();
+ }
+
+ if (ll->flags & DMA_BUFFER_ALLOCATED)
+ ll->free(ll->alloc_data);
+
+ spin_lock_irqsave(&ll_lock, flags);
+ *(long *)ll = *(long *)ll_pool.cur;
+ *(long *)ll_pool.cur = (long)ll;
+ ll_pool.count++;
+ spin_unlock_irqrestore(&ll_lock, flags);
+ }
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_free_ll_entry);
+
+void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll * ll)
+{
+ struct pnx4008_dma_ll *ptr;
+ u32 dma;
+
+ while (ll) {
+ dma = ll->next_dma;
+ ptr = ll->next;
+ pnx4008_free_ll_entry(ll, ll_dma);
+
+ ll_dma = dma;
+ ll = ptr;
+ }
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_free_ll);
+
+static int dma_channels_requested = 0;
+
+static inline void dma_increment_usage(void)
+{
+ if (!dma_channels_requested++) {
+ struct clk *clk = clk_get(0, "dma_ck");
+ if (!IS_ERR(clk)) {
+ clk_set_rate(clk, 1);
+ clk_put(clk);
+ }
+ pnx4008_config_dma(-1, -1, 1);
+ }
+}
+static inline void dma_decrement_usage(void)
+{
+ if (!--dma_channels_requested) {
+ struct clk *clk = clk_get(0, "dma_ck");
+ if (!IS_ERR(clk)) {
+ clk_set_rate(clk, 0);
+ clk_put(clk);
+ }
+ pnx4008_config_dma(-1, -1, 0);
+
+ }
+}
+
+static spinlock_t dma_lock = SPIN_LOCK_UNLOCKED;
+
+static inline void pnx4008_dma_lock(void)
+{
+ spin_lock_irq(&dma_lock);
+}
+
+static inline void pnx4008_dma_unlock(void)
+{
+ spin_unlock_irq(&dma_lock);
+}
+
+#define VALID_CHANNEL(c) (((c) >= 0) && ((c) < MAX_DMA_CHANNELS))
+
+int pnx4008_request_channel(char *name, int ch,
+ void (*irq_handler) (int, int, void *,
+ struct pt_regs *), void *data)
+{
+ int i, found = 0;
+
+ /* basic sanity checks */
+ if (!name || (ch != -1 && !VALID_CHANNEL(ch)))
+ return -EINVAL;
+
+ pnx4008_dma_lock();
+
+ /* try grabbing a DMA channel with the requested priority */
+ for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
+ if (!dma_channels[i].name && (ch == -1 || ch == i)) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ dma_increment_usage();
+ dma_channels[i].name = name;
+ dma_channels[i].irq_handler = irq_handler;
+ dma_channels[i].data = data;
+ dma_channels[i].ll = NULL;
+ dma_channels[i].ll_dma = 0;
+ } else {
+ printk(KERN_WARNING "No more available DMA channels for %s\n",
+ name);
+ i = -ENODEV;
+ }
+
+ pnx4008_dma_unlock();
+ return i;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_request_channel);
+
+void pnx4008_free_channel(int ch)
+{
+ if (!dma_channels[ch].name) {
+ printk(KERN_CRIT
+ "%s: trying to free channel %d which is already freed\n",
+ __FUNCTION__, ch);
+ return;
+ }
+
+ pnx4008_dma_lock();
+ pnx4008_free_ll(dma_channels[ch].ll_dma, dma_channels[ch].ll);
+ dma_channels[ch].ll = NULL;
+ dma_decrement_usage();
+
+ dma_channels[ch].name = NULL;
+ pnx4008_dma_unlock();
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_free_channel);
+
+int pnx4008_config_dma(int ahb_m1_be, int ahb_m2_be, int enable)
+{
+ unsigned long dma_cfg = __raw_readl(DMAC_CONFIG);
+
+ switch (ahb_m1_be) {
+ case 0:
+ dma_cfg &= ~(1 << 1);
+ break;
+ case 1:
+ dma_cfg |= (1 << 1);
+ break;
+ default:
+ break;
+ }
+
+ switch (ahb_m2_be) {
+ case 0:
+ dma_cfg &= ~(1 << 2);
+ break;
+ case 1:
+ dma_cfg |= (1 << 2);
+ break;
+ default:
+ break;
+ }
+
+ switch (enable) {
+ case 0:
+ dma_cfg &= ~(1 << 0);
+ break;
+ case 1:
+ dma_cfg |= (1 << 0);
+ break;
+ default:
+ break;
+ }
+
+ pnx4008_dma_lock();
+ __raw_writel(dma_cfg, DMAC_CONFIG);
+ pnx4008_dma_unlock();
+
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_config_dma);
+
+int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl * ch_ctrl,
+ unsigned long *ctrl)
+{
+ int i = 0, dbsize, sbsize, err = 0;
+
+ if (!ctrl || !ch_ctrl) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ *ctrl = 0;
+
+ switch (ch_ctrl->tc_mask) {
+ case 0:
+ break;
+ case 1:
+ *ctrl |= (1 << 31);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+
+ switch (ch_ctrl->cacheable) {
+ case 0:
+ break;
+ case 1:
+ *ctrl |= (1 << 30);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_ctrl->bufferable) {
+ case 0:
+ break;
+ case 1:
+ *ctrl |= (1 << 29);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_ctrl->priv_mode) {
+ case 0:
+ break;
+ case 1:
+ *ctrl |= (1 << 28);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_ctrl->di) {
+ case 0:
+ break;
+ case 1:
+ *ctrl |= (1 << 27);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_ctrl->si) {
+ case 0:
+ break;
+ case 1:
+ *ctrl |= (1 << 26);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_ctrl->dest_ahb1) {
+ case 0:
+ break;
+ case 1:
+ *ctrl |= (1 << 25);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_ctrl->src_ahb1) {
+ case 0:
+ break;
+ case 1:
+ *ctrl |= (1 << 24);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_ctrl->dwidth) {
+ case WIDTH_BYTE:
+ *ctrl &= ~(7 << 21);
+ break;
+ case WIDTH_HWORD:
+ *ctrl &= ~(7 << 21);
+ *ctrl |= (1 << 21);
+ break;
+ case WIDTH_WORD:
+ *ctrl &= ~(7 << 21);
+ *ctrl |= (2 << 21);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_ctrl->swidth) {
+ case WIDTH_BYTE:
+ *ctrl &= ~(7 << 18);
+ break;
+ case WIDTH_HWORD:
+ *ctrl &= ~(7 << 18);
+ *ctrl |= (1 << 18);
+ break;
+ case WIDTH_WORD:
+ *ctrl &= ~(7 << 18);
+ *ctrl |= (2 << 18);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ dbsize = ch_ctrl->dbsize;
+ while (!(dbsize & 1)) {
+ i++;
+ dbsize >>= 1;
+ }
+ if (ch_ctrl->dbsize != 1 || i > 8 || i == 1) {
+ err = -EINVAL;
+ goto out;
+ } else if (i > 1)
+ i--;
+ *ctrl &= ~(7 << 15);
+ *ctrl |= (i << 15);
+
+ sbsize = ch_ctrl->sbsize;
+ while (!(sbsize & 1)) {
+ i++;
+ sbsize >>= 1;
+ }
+ if (ch_ctrl->sbsize != 1 || i > 8 || i == 1) {
+ err = -EINVAL;
+ goto out;
+ } else if (i > 1)
+ i--;
+ *ctrl &= ~(7 << 12);
+ *ctrl |= (i << 12);
+
+ if (ch_ctrl->tr_size > 0x7ff) {
+ err = -E2BIG;
+ goto out;
+ }
+ *ctrl &= ~0x7ff;
+ *ctrl |= ch_ctrl->tr_size & 0x7ff;
+
+out:
+ return err;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_pack_control);
+
+int pnx4008_dma_parse_control(unsigned long ctrl,
+ struct pnx4008_dma_ch_ctrl * ch_ctrl)
+{
+ int err = 0;
+
+ if (!ch_ctrl) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ ch_ctrl->tr_size = ctrl & 0x7ff;
+ ctrl >>= 12;
+
+ ch_ctrl->sbsize = 1 << (ctrl & 7);
+ if (ch_ctrl->sbsize > 1)
+ ch_ctrl->sbsize <<= 1;
+ ctrl >>= 3;
+
+ ch_ctrl->dbsize = 1 << (ctrl & 7);
+ if (ch_ctrl->dbsize > 1)
+ ch_ctrl->dbsize <<= 1;
+ ctrl >>= 3;
+
+ switch (ctrl & 7) {
+ case 0:
+ ch_ctrl->swidth = WIDTH_BYTE;
+ break;
+ case 1:
+ ch_ctrl->swidth = WIDTH_HWORD;
+ break;
+ case 2:
+ ch_ctrl->swidth = WIDTH_WORD;
+ break;
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ ctrl >>= 3;
+
+ switch (ctrl & 7) {
+ case 0:
+ ch_ctrl->dwidth = WIDTH_BYTE;
+ break;
+ case 1:
+ ch_ctrl->dwidth = WIDTH_HWORD;
+ break;
+ case 2:
+ ch_ctrl->dwidth = WIDTH_WORD;
+ break;
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ ctrl >>= 3;
+
+ ch_ctrl->src_ahb1 = ctrl & 1;
+ ctrl >>= 1;
+
+ ch_ctrl->dest_ahb1 = ctrl & 1;
+ ctrl >>= 1;
+
+ ch_ctrl->si = ctrl & 1;
+ ctrl >>= 1;
+
+ ch_ctrl->di = ctrl & 1;
+ ctrl >>= 1;
+
+ ch_ctrl->priv_mode = ctrl & 1;
+ ctrl >>= 1;
+
+ ch_ctrl->bufferable = ctrl & 1;
+ ctrl >>= 1;
+
+ ch_ctrl->cacheable = ctrl & 1;
+ ctrl >>= 1;
+
+ ch_ctrl->tc_mask = ctrl & 1;
+
+out:
+ return err;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_parse_control);
+
+int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config * ch_cfg,
+ unsigned long *cfg)
+{
+ int err = 0;
+
+ if (!cfg || !ch_cfg) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ *cfg = 0;
+
+ switch (ch_cfg->halt) {
+ case 0:
+ break;
+ case 1:
+ *cfg |= (1 << 18);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_cfg->active) {
+ case 0:
+ break;
+ case 1:
+ *cfg |= (1 << 17);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_cfg->lock) {
+ case 0:
+ break;
+ case 1:
+ *cfg |= (1 << 16);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_cfg->itc) {
+ case 0:
+ break;
+ case 1:
+ *cfg |= (1 << 15);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_cfg->ie) {
+ case 0:
+ break;
+ case 1:
+ *cfg |= (1 << 14);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ switch (ch_cfg->flow_cntrl) {
+ case FC_MEM2MEM_DMA:
+ *cfg &= ~(7 << 11);
+ break;
+ case FC_MEM2PER_DMA:
+ *cfg &= ~(7 << 11);
+ *cfg |= (1 << 11);
+ break;
+ case FC_PER2MEM_DMA:
+ *cfg &= ~(7 << 11);
+ *cfg |= (2 << 11);
+ break;
+ case FC_PER2PER_DMA:
+ *cfg &= ~(7 << 11);
+ *cfg |= (3 << 11);
+ break;
+ case FC_PER2PER_DPER:
+ *cfg &= ~(7 << 11);
+ *cfg |= (4 << 11);
+ break;
+ case FC_MEM2PER_PER:
+ *cfg &= ~(7 << 11);
+ *cfg |= (5 << 11);
+ break;
+ case FC_PER2MEM_PER:
+ *cfg &= ~(7 << 11);
+ *cfg |= (6 << 11);
+ break;
+ case FC_PER2PER_SPER:
+ *cfg |= (7 << 11);
+ break;
+
+ default:
+ err = -EINVAL;
+ goto out;
+ }
+ *cfg &= ~(0x1f << 6);
+ *cfg |= ((ch_cfg->dest_per & 0x1f) << 6);
+
+ *cfg &= ~(0x1f << 1);
+ *cfg |= ((ch_cfg->src_per & 0x1f) << 1);
+
+out:
+ return err;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_pack_config);
+
+int pnx4008_dma_parse_config(unsigned long cfg,
+ struct pnx4008_dma_ch_config * ch_cfg)
+{
+ int err = 0;
+
+ if (!ch_cfg) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ cfg >>= 1;
+
+ ch_cfg->src_per = cfg & 0x1f;
+ cfg >>= 5;
+
+ ch_cfg->dest_per = cfg & 0x1f;
+ cfg >>= 5;
+
+ switch (cfg & 7) {
+ case 0:
+ ch_cfg->flow_cntrl = FC_MEM2MEM_DMA;
+ break;
+ case 1:
+ ch_cfg->flow_cntrl = FC_MEM2PER_DMA;
+ break;
+ case 2:
+ ch_cfg->flow_cntrl = FC_PER2MEM_DMA;
+ break;
+ case 3:
+ ch_cfg->flow_cntrl = FC_PER2PER_DMA;
+ break;
+ case 4:
+ ch_cfg->flow_cntrl = FC_PER2PER_DPER;
+ break;
+ case 5:
+ ch_cfg->flow_cntrl = FC_MEM2PER_PER;
+ break;
+ case 6:
+ ch_cfg->flow_cntrl = FC_PER2MEM_PER;
+ break;
+ case 7:
+ ch_cfg->flow_cntrl = FC_PER2PER_SPER;
+ }
+ cfg >>= 3;
+
+ ch_cfg->ie = cfg & 1;
+ cfg >>= 1;
+
+ ch_cfg->itc = cfg & 1;
+ cfg >>= 1;
+
+ ch_cfg->lock = cfg & 1;
+ cfg >>= 1;
+
+ ch_cfg->active = cfg & 1;
+ cfg >>= 1;
+
+ ch_cfg->halt = cfg & 1;
+
+out:
+ return err;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_parse_config);
+
+void pnx4008_dma_split_head_entry(struct pnx4008_dma_config * config,
+ struct pnx4008_dma_ch_ctrl * ctrl)
+{
+ int new_len = ctrl->tr_size, num_entries = 0;
+ int old_len = new_len;
+ int src_width, dest_width, count = 1;
+
+ switch (ctrl->swidth) {
+ case WIDTH_BYTE:
+ src_width = 1;
+ break;
+ case WIDTH_HWORD:
+ src_width = 2;
+ break;
+ case WIDTH_WORD:
+ src_width = 4;
+ break;
+ default:
+ return;
+ }
+
+ switch (ctrl->dwidth) {
+ case WIDTH_BYTE:
+ dest_width = 1;
+ break;
+ case WIDTH_HWORD:
+ dest_width = 2;
+ break;
+ case WIDTH_WORD:
+ dest_width = 4;
+ break;
+ default:
+ return;
+ }
+
+ while (new_len > 0x7FF) {
+ num_entries++;
+ new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
+ }
+ if (num_entries != 0) {
+ struct pnx4008_dma_ll *ll = NULL;
+ config->ch_ctrl &= ~0x7ff;
+ config->ch_ctrl |= new_len;
+ if (!config->is_ll) {
+ config->is_ll = 1;
+ while (num_entries) {
+ if (!ll) {
+ config->ll =
+ pnx4008_alloc_ll_entry(&config->
+ ll_dma);
+ ll = config->ll;
+ } else {
+ ll->next =
+ pnx4008_alloc_ll_entry(&ll->
+ next_dma);
+ ll = ll->next;
+ }
+
+ if (ctrl->si)
+ ll->src_addr =
+ config->src_addr +
+ src_width * new_len * count;
+ else
+ ll->src_addr = config->src_addr;
+ if (ctrl->di)
+ ll->dest_addr =
+ config->dest_addr +
+ dest_width * new_len * count;
+ else
+ ll->dest_addr = config->dest_addr;
+ ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
+ ll->next_dma = 0;
+ ll->next = NULL;
+ num_entries--;
+ count++;
+ }
+ } else {
+ struct pnx4008_dma_ll *ll_old = config->ll;
+ unsigned long ll_dma_old = config->ll_dma;
+ while (num_entries) {
+ if (!ll) {
+ config->ll =
+ pnx4008_alloc_ll_entry(&config->
+ ll_dma);
+ ll = config->ll;
+ } else {
+ ll->next =
+ pnx4008_alloc_ll_entry(&ll->
+ next_dma);
+ ll = ll->next;
+ }
+
+ if (ctrl->si)
+ ll->src_addr =
+ config->src_addr +
+ src_width * new_len * count;
+ else
+ ll->src_addr = config->src_addr;
+ if (ctrl->di)
+ ll->dest_addr =
+ config->dest_addr +
+ dest_width * new_len * count;
+ else
+ ll->dest_addr = config->dest_addr;
+ ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
+ ll->next_dma = 0;
+ ll->next = NULL;
+ num_entries--;
+ count++;
+ }
+ ll->next_dma = ll_dma_old;
+ ll->next = ll_old;
+ }
+ /* adjust last length/tc */
+ ll->ch_ctrl = config->ch_ctrl & (~0x7ff);
+ ll->ch_ctrl |= old_len - new_len * (count - 1);
+ config->ch_ctrl &= 0x7fffffff;
+ }
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_split_head_entry);
+
+void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll * cur_ll,
+ struct pnx4008_dma_ch_ctrl * ctrl)
+{
+ int new_len = ctrl->tr_size, num_entries = 0;
+ int old_len = new_len;
+ int src_width, dest_width, count = 1;
+
+ switch (ctrl->swidth) {
+ case WIDTH_BYTE:
+ src_width = 1;
+ break;
+ case WIDTH_HWORD:
+ src_width = 2;
+ break;
+ case WIDTH_WORD:
+ src_width = 4;
+ break;
+ default:
+ return;
+ }
+
+ switch (ctrl->dwidth) {
+ case WIDTH_BYTE:
+ dest_width = 1;
+ break;
+ case WIDTH_HWORD:
+ dest_width = 2;
+ break;
+ case WIDTH_WORD:
+ dest_width = 4;
+ break;
+ default:
+ return;
+ }
+
+ while (new_len > 0x7FF) {
+ num_entries++;
+ new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
+ }
+ if (num_entries != 0) {
+ struct pnx4008_dma_ll *ll = NULL;
+ cur_ll->ch_ctrl &= ~0x7ff;
+ cur_ll->ch_ctrl |= new_len;
+ if (!cur_ll->next) {
+ while (num_entries) {
+ if (!ll) {
+ cur_ll->next =
+ pnx4008_alloc_ll_entry(&cur_ll->
+ next_dma);
+ ll = cur_ll->next;
+ } else {
+ ll->next =
+ pnx4008_alloc_ll_entry(&ll->
+ next_dma);
+ ll = ll->next;
+ }
+
+ if (ctrl->si)
+ ll->src_addr =
+ cur_ll->src_addr +
+ src_width * new_len * count;
+ else
+ ll->src_addr = cur_ll->src_addr;
+ if (ctrl->di)
+ ll->dest_addr =
+ cur_ll->dest_addr +
+ dest_width * new_len * count;
+ else
+ ll->dest_addr = cur_ll->dest_addr;
+ ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
+ ll->next_dma = 0;
+ ll->next = NULL;
+ num_entries--;
+ count++;
+ }
+ } else {
+ struct pnx4008_dma_ll *ll_old = cur_ll->next;
+ unsigned long ll_dma_old = cur_ll->next_dma;
+ while (num_entries) {
+ if (!ll) {
+ cur_ll->next =
+ pnx4008_alloc_ll_entry(&cur_ll->
+ next_dma);
+ ll = cur_ll->next;
+ } else {
+ ll->next =
+ pnx4008_alloc_ll_entry(&ll->
+ next_dma);
+ ll = ll->next;
+ }
+
+ if (ctrl->si)
+ ll->src_addr =
+ cur_ll->src_addr +
+ src_width * new_len * count;
+ else
+ ll->src_addr = cur_ll->src_addr;
+ if (ctrl->di)
+ ll->dest_addr =
+ cur_ll->dest_addr +
+ dest_width * new_len * count;
+ else
+ ll->dest_addr = cur_ll->dest_addr;
+ ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
+ ll->next_dma = 0;
+ ll->next = NULL;
+ num_entries--;
+ count++;
+ }
+
+ ll->next_dma = ll_dma_old;
+ ll->next = ll_old;
+ }
+ /* adjust last length/tc */
+ ll->ch_ctrl = cur_ll->ch_ctrl & (~0x7ff);
+ ll->ch_ctrl |= old_len - new_len * (count - 1);
+ cur_ll->ch_ctrl &= 0x7fffffff;
+ }
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_split_ll_entry);
+
+int pnx4008_config_channel(int ch, struct pnx4008_dma_config * config)
+{
+ if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
+ return -EINVAL;
+
+ pnx4008_dma_lock();
+ __raw_writel(config->src_addr, DMAC_Cx_SRC_ADDR(ch));
+ __raw_writel(config->dest_addr, DMAC_Cx_DEST_ADDR(ch));
+
+ if (config->is_ll)
+ __raw_writel(config->ll_dma, DMAC_Cx_LLI(ch));
+ else
+ __raw_writel(0, DMAC_Cx_LLI(ch));
+
+ __raw_writel(config->ch_ctrl, DMAC_Cx_CONTROL(ch));
+ __raw_writel(config->ch_cfg, DMAC_Cx_CONFIG(ch));
+ pnx4008_dma_unlock();
+
+ return 0;
+
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_config_channel);
+
+int pnx4008_channel_get_config(int ch, struct pnx4008_dma_config * config)
+{
+ if (!VALID_CHANNEL(ch) || !dma_channels[ch].name || !config)
+ return -EINVAL;
+
+ pnx4008_dma_lock();
+ config->ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
+ config->ch_ctrl = __raw_readl(DMAC_Cx_CONTROL(ch));
+
+ config->ll_dma = __raw_readl(DMAC_Cx_LLI(ch));
+ config->is_ll = config->ll_dma ? 1 : 0;
+
+ config->src_addr = __raw_readl(DMAC_Cx_SRC_ADDR(ch));
+ config->dest_addr = __raw_readl(DMAC_Cx_DEST_ADDR(ch));
+ pnx4008_dma_unlock();
+
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_channel_get_config);
+
+int pnx4008_dma_ch_enable(int ch)
+{
+ unsigned long ch_cfg;
+
+ if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
+ return -EINVAL;
+
+ pnx4008_dma_lock();
+ ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
+ ch_cfg |= 1;
+ __raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
+ pnx4008_dma_unlock();
+
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enable);
+
+int pnx4008_dma_ch_disable(int ch)
+{
+ unsigned long ch_cfg;
+
+ if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
+ return -EINVAL;
+
+ pnx4008_dma_lock();
+ ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
+ ch_cfg &= ~1;
+ __raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
+ pnx4008_dma_unlock();
+
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_ch_disable);
+
+int pnx4008_dma_ch_enabled(int ch)
+{
+ unsigned long ch_cfg;
+
+ if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
+ return -EINVAL;
+
+ pnx4008_dma_lock();
+ ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
+ pnx4008_dma_unlock();
+
+ return ch_cfg & 1;
+}
+
+EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enabled);
+
+static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+ int i;
+ unsigned long dint = __raw_readl(DMAC_INT_STAT);
+ unsigned long tcint = __raw_readl(DMAC_INT_TC_STAT);
+ unsigned long eint = __raw_readl(DMAC_INT_ERR_STAT);
+ unsigned long i_bit;
+
+ for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
+ i_bit = 1 << i;
+ if (dint & i_bit) {
+ struct dma_channel *channel = &dma_channels[i];
+
+ if (channel->name && channel->irq_handler) {
+ int cause = 0;
+
+ if (eint & i_bit)
+ cause |= DMA_ERR_INT;
+ if (tcint & i_bit)
+ cause |= DMA_TC_INT;
+ channel->irq_handler(i, cause, channel->data,
+ regs);
+ } else {
+ /*
+ * IRQ for an unregistered DMA channel
+ */
+ printk(KERN_WARNING
+ "spurious IRQ for DMA channel %d\n", i);
+ }
+ if (tcint & i_bit)
+ __raw_writel(i_bit, DMAC_INT_TC_CLEAR);
+ if (eint & i_bit)
+ __raw_writel(i_bit, DMAC_INT_ERR_CLEAR);
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+static int __init pnx4008_dma_init(void)
+{
+ int ret, i;
+
+ ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
+ if (ret) {
+ printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n");
+ goto out;
+ }
+
+ ll_pool.count = 0x4000 / sizeof(struct pnx4008_dma_ll);
+ ll_pool.cur = ll_pool.vaddr =
+ dma_alloc_coherent(NULL, ll_pool.count * sizeof(struct pnx4008_dma_ll),
+ &ll_pool.dma_addr, GFP_KERNEL);
+
+ if (!ll_pool.vaddr) {
+ ret = -ENOMEM;
+ free_irq(DMA_INT, NULL);
+ goto out;
+ }
+
+ for (i = 0; i < ll_pool.count - 1; i++) {
+ void **addr = ll_pool.vaddr + i * sizeof(struct pnx4008_dma_ll);
+ *addr = (void *)addr + sizeof(struct pnx4008_dma_ll);
+ }
+ *(long *)(ll_pool.vaddr +
+ (ll_pool.count - 1) * sizeof(struct pnx4008_dma_ll)) =
+ (long)ll_pool.vaddr;
+
+ __raw_writel(1, DMAC_CONFIG);
+
+out:
+ return ret;
+}
+arch_initcall(pnx4008_dma_init);
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
new file mode 100644
index 000000000000..e1ce050d8fe0
--- /dev/null
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -0,0 +1,330 @@
+/*
+ * arch/arm/mach-pnx4008/gpio.c
+ *
+ * PNX4008 GPIO driver
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
+ * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/semaphore.h>
+#include <asm/io.h>
+#include <asm/arch/platform.h>
+#include <asm/arch/gpio.h>
+
+/* register definitions */
+#define PIO_VA_BASE IO_ADDRESS(PNX4008_PIO_BASE)
+
+#define PIO_INP_STATE (0x00U)
+#define PIO_OUTP_SET (0x04U)
+#define PIO_OUTP_CLR (0x08U)
+#define PIO_OUTP_STATE (0x0CU)
+#define PIO_DRV_SET (0x10U)
+#define PIO_DRV_CLR (0x14U)
+#define PIO_DRV_STATE (0x18U)
+#define PIO_SDINP_STATE (0x1CU)
+#define PIO_SDOUTP_SET (0x20U)
+#define PIO_SDOUTP_CLR (0x24U)
+#define PIO_MUX_SET (0x28U)
+#define PIO_MUX_CLR (0x2CU)
+#define PIO_MUX_STATE (0x30U)
+
+static inline void gpio_lock(void)
+{
+ local_irq_disable();
+}
+
+static inline void gpio_unlock(void)
+{
+ local_irq_enable();
+}
+
+/* Inline functions */
+static inline int gpio_read_bit(u32 reg, int gpio)
+{
+ u32 bit, val;
+ int ret = -EFAULT;
+
+ if (gpio < 0)
+ goto out;
+
+ bit = GPIO_BIT(gpio);
+ if (bit) {
+ val = __raw_readl(PIO_VA_BASE + reg);
+ ret = (val & bit) ? 1 : 0;
+ }
+out:
+ return ret;
+}
+
+static inline int gpio_set_bit(u32 reg, int gpio)
+{
+ u32 bit, val;
+ int ret = -EFAULT;
+
+ if (gpio < 0)
+ goto out;
+
+ bit = GPIO_BIT(gpio);
+ if (bit) {
+ val = __raw_readl(PIO_VA_BASE + reg);
+ val |= bit;
+ __raw_writel(val, PIO_VA_BASE + reg);
+ ret = 0;
+ }
+out:
+ return ret;
+}
+
+/* Very simple access control, bitmap for allocated/free */
+static unsigned long access_map[4];
+#define INP_INDEX 0
+#define OUTP_INDEX 1
+#define GPIO_INDEX 2
+#define MUX_INDEX 3
+
+/*GPIO to Input Mapping */
+static short gpio_to_inp_map[32] = {
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, 10, 11, 12, 13, 14, 24, -1
+};
+
+/*GPIO to Mux Mapping */
+static short gpio_to_mux_map[32] = {
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, 0, 1, 4, 5, -1
+};
+
+/*Output to Mux Mapping */
+static short outp_to_mux_map[32] = {
+ -1, -1, -1, 6, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, 2, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1
+};
+
+int pnx4008_gpio_register_pin(unsigned short pin)
+{
+ unsigned long bit = GPIO_BIT(pin);
+ int ret = -EBUSY; /* Already in use */
+
+ gpio_lock();
+
+ if (GPIO_ISBID(pin)) {
+ if (access_map[GPIO_INDEX] & bit)
+ goto out;
+ access_map[GPIO_INDEX] |= bit;
+
+ } else if (GPIO_ISRAM(pin)) {
+ if (access_map[GPIO_INDEX] & bit)
+ goto out;
+ access_map[GPIO_INDEX] |= bit;
+
+ } else if (GPIO_ISMUX(pin)) {
+ if (access_map[MUX_INDEX] & bit)
+ goto out;
+ access_map[MUX_INDEX] |= bit;
+
+ } else if (GPIO_ISOUT(pin)) {
+ if (access_map[OUTP_INDEX] & bit)
+ goto out;
+ access_map[OUTP_INDEX] |= bit;
+
+ } else if (GPIO_ISIN(pin)) {
+ if (access_map[INP_INDEX] & bit)
+ goto out;
+ access_map[INP_INDEX] |= bit;
+ } else
+ goto out;
+ ret = 0;
+
+out:
+ gpio_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_register_pin);
+
+int pnx4008_gpio_unregister_pin(unsigned short pin)
+{
+ unsigned long bit = GPIO_BIT(pin);
+ int ret = -EFAULT; /* Not registered */
+
+ gpio_lock();
+
+ if (GPIO_ISBID(pin)) {
+ if (~access_map[GPIO_INDEX] & bit)
+ goto out;
+ access_map[GPIO_INDEX] &= ~bit;
+ } else if (GPIO_ISRAM(pin)) {
+ if (~access_map[GPIO_INDEX] & bit)
+ goto out;
+ access_map[GPIO_INDEX] &= ~bit;
+ } else if (GPIO_ISMUX(pin)) {
+ if (~access_map[MUX_INDEX] & bit)
+ goto out;
+ access_map[MUX_INDEX] &= ~bit;
+ } else if (GPIO_ISOUT(pin)) {
+ if (~access_map[OUTP_INDEX] & bit)
+ goto out;
+ access_map[OUTP_INDEX] &= ~bit;
+ } else if (GPIO_ISIN(pin)) {
+ if (~access_map[INP_INDEX] & bit)
+ goto out;
+ access_map[INP_INDEX] &= ~bit;
+ } else
+ goto out;
+ ret = 0;
+
+out:
+ gpio_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_unregister_pin);
+
+unsigned long pnx4008_gpio_read_pin(unsigned short pin)
+{
+ unsigned long ret = -EFAULT;
+ int gpio = GPIO_BIT_MASK(pin);
+ gpio_lock();
+ if (GPIO_ISOUT(pin)) {
+ ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
+ } else if (GPIO_ISRAM(pin)) {
+ if (gpio_read_bit(PIO_DRV_STATE, gpio) == 0) {
+ ret = gpio_read_bit(PIO_SDINP_STATE, gpio);
+ }
+ } else if (GPIO_ISBID(pin)) {
+ ret = gpio_read_bit(PIO_DRV_STATE, gpio);
+ if (ret > 0)
+ ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
+ else if (ret == 0)
+ ret =
+ gpio_read_bit(PIO_INP_STATE, gpio_to_inp_map[gpio]);
+ } else if (GPIO_ISIN(pin)) {
+ ret = gpio_read_bit(PIO_INP_STATE, gpio);
+ }
+ gpio_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_read_pin);
+
+/* Write Value to output */
+int pnx4008_gpio_write_pin(unsigned short pin, int output)
+{
+ int gpio = GPIO_BIT_MASK(pin);
+ int ret = -EFAULT;
+
+ gpio_lock();
+ if (GPIO_ISOUT(pin)) {
+ printk( "writing '%x' to '%x'\n",
+ gpio, output ? PIO_OUTP_SET : PIO_OUTP_CLR );
+ ret = gpio_set_bit(output ? PIO_OUTP_SET : PIO_OUTP_CLR, gpio);
+ } else if (GPIO_ISRAM(pin)) {
+ if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
+ ret = gpio_set_bit(output ? PIO_SDOUTP_SET :
+ PIO_SDOUTP_CLR, gpio);
+ } else if (GPIO_ISBID(pin)) {
+ if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
+ ret = gpio_set_bit(output ? PIO_OUTP_SET :
+ PIO_OUTP_CLR, gpio);
+ }
+ gpio_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_write_pin);
+
+/* Value = 1 : Set GPIO pin as output */
+/* Value = 0 : Set GPIO pin as input */
+int pnx4008_gpio_set_pin_direction(unsigned short pin, int output)
+{
+ int gpio = GPIO_BIT_MASK(pin);
+ int ret = -EFAULT;
+
+ gpio_lock();
+ if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
+ ret = gpio_set_bit(output ? PIO_DRV_SET : PIO_DRV_CLR, gpio);
+ }
+ gpio_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_set_pin_direction);
+
+/* Read GPIO pin direction: 0= pin used as input, 1= pin used as output*/
+int pnx4008_gpio_read_pin_direction(unsigned short pin)
+{
+ int gpio = GPIO_BIT_MASK(pin);
+ int ret = -EFAULT;
+
+ gpio_lock();
+ if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
+ ret = gpio_read_bit(PIO_DRV_STATE, gpio);
+ }
+ gpio_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_read_pin_direction);
+
+/* Value = 1 : Set pin to muxed function */
+/* Value = 0 : Set pin as GPIO */
+int pnx4008_gpio_set_pin_mux(unsigned short pin, int output)
+{
+ int gpio = GPIO_BIT_MASK(pin);
+ int ret = -EFAULT;
+
+ gpio_lock();
+ if (GPIO_ISBID(pin)) {
+ ret =
+ gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
+ gpio_to_mux_map[gpio]);
+ } else if (GPIO_ISOUT(pin)) {
+ ret =
+ gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
+ outp_to_mux_map[gpio]);
+ } else if (GPIO_ISMUX(pin)) {
+ ret = gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, gpio);
+ }
+ gpio_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_set_pin_mux);
+
+/* Read pin mux function: 0= pin used as GPIO, 1= pin used for muxed function*/
+int pnx4008_gpio_read_pin_mux(unsigned short pin)
+{
+ int gpio = GPIO_BIT_MASK(pin);
+ int ret = -EFAULT;
+
+ gpio_lock();
+ if (GPIO_ISBID(pin)) {
+ ret = gpio_read_bit(PIO_MUX_STATE, gpio_to_mux_map[gpio]);
+ } else if (GPIO_ISOUT(pin)) {
+ ret = gpio_read_bit(PIO_MUX_STATE, outp_to_mux_map[gpio]);
+ } else if (GPIO_ISMUX(pin)) {
+ ret = gpio_read_bit(PIO_MUX_STATE, gpio);
+ }
+ gpio_unlock();
+ return ret;
+}
+
+EXPORT_SYMBOL(pnx4008_gpio_read_pin_mux);
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
new file mode 100644
index 000000000000..9b0a8e084e99
--- /dev/null
+++ b/arch/arm/mach-pnx4008/irq.c
@@ -0,0 +1,121 @@
+/*
+ * arch/arm/mach-pnx4008/irq.c
+ *
+ * PNX4008 IRQ controller driver
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code received from Philips:
+ * Copyright (C) 2003 Philips Semiconductors
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/arch/irq.h>
+
+static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
+
+static void pnx4008_mask_irq(unsigned int irq)
+{
+ __raw_writel(__raw_readl(INTC_ER(irq)) & ~INTC_BIT(irq), INTC_ER(irq)); /* mask interrupt */
+}
+
+static void pnx4008_unmask_irq(unsigned int irq)
+{
+ __raw_writel(__raw_readl(INTC_ER(irq)) | INTC_BIT(irq), INTC_ER(irq)); /* unmask interrupt */
+}
+
+static void pnx4008_mask_ack_irq(unsigned int irq)
+{
+ __raw_writel(__raw_readl(INTC_ER(irq)) & ~INTC_BIT(irq), INTC_ER(irq)); /* mask interrupt */
+ __raw_writel(INTC_BIT(irq), INTC_SR(irq)); /* clear interrupt status */
+}
+
+static int pnx4008_set_irq_type(unsigned int irq, unsigned int type)
+{
+ switch (type) {
+ case IRQT_RISING:
+ __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */
+ __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /*rising edge */
+ set_irq_handler(irq, do_edge_IRQ);
+ break;
+ case IRQT_FALLING:
+ __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */
+ __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*falling edge */
+ set_irq_handler(irq, do_edge_IRQ);
+ break;
+ case IRQT_LOW:
+ __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */
+ __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*low level */
+ set_irq_handler(irq, do_level_IRQ);
+ break;
+ case IRQT_HIGH:
+ __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */
+ __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /* high level */
+ set_irq_handler(irq, do_level_IRQ);
+ break;
+
+ /* IRQT_BOTHEDGE is not supported */
+ default:
+ printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
+ return -1;
+ }
+ return 0;
+}
+
+static struct irqchip pnx4008_irq_chip = {
+ .ack = pnx4008_mask_ack_irq,
+ .mask = pnx4008_mask_irq,
+ .unmask = pnx4008_unmask_irq,
+ .set_type = pnx4008_set_irq_type,
+};
+
+void __init pnx4008_init_irq(void)
+{
+ unsigned int i;
+
+ /* configure and enable IRQ 0,1,30,31 (cascade interrupts) mask all others */
+ pnx4008_set_irq_type(SUB1_IRQ_N, pnx4008_irq_type[SUB1_IRQ_N]);
+ pnx4008_set_irq_type(SUB2_IRQ_N, pnx4008_irq_type[SUB2_IRQ_N]);
+ pnx4008_set_irq_type(SUB1_FIQ_N, pnx4008_irq_type[SUB1_FIQ_N]);
+ pnx4008_set_irq_type(SUB2_FIQ_N, pnx4008_irq_type[SUB2_FIQ_N]);
+
+ __raw_writel((1 << SUB2_FIQ_N) | (1 << SUB1_FIQ_N) |
+ (1 << SUB2_IRQ_N) | (1 << SUB1_IRQ_N),
+ INTC_ER(MAIN_BASE_INT));
+ __raw_writel(0, INTC_ER(SIC1_BASE_INT));
+ __raw_writel(0, INTC_ER(SIC2_BASE_INT));
+
+ /* configure all other IRQ's */
+ for (i = 0; i < NR_IRQS; i++) {
+ if (i == SUB2_FIQ_N || i == SUB1_FIQ_N ||
+ i == SUB2_IRQ_N || i == SUB1_IRQ_N)
+ continue;
+ set_irq_flags(i, IRQF_VALID);
+ set_irq_chip(i, &pnx4008_irq_chip);
+ pnx4008_set_irq_type(i, pnx4008_irq_type[i]);
+ }
+}
+
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
new file mode 100644
index 000000000000..3649cd3dfc9a
--- /dev/null
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -0,0 +1,184 @@
+/*
+ * arch/arm/mach-pnx4008/pm.c
+ *
+ * Power Management driver for PNX4008
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/pm.h>
+#include <linux/rtc.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/cacheflush.h>
+#include <asm/arch/pm.h>
+#include <asm/arch/clock.h>
+
+#define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE)
+
+static void *saved_sram;
+
+static struct clk *pll4_clk;
+
+static inline void pnx4008_standby(void)
+{
+ void (*pnx4008_cpu_standby_ptr) (void);
+
+ local_irq_disable();
+ local_fiq_disable();
+
+ clk_disable(pll4_clk);
+
+ /*saving portion of SRAM to be used by suspend function. */
+ memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_standby_sz);
+
+ /*make sure SRAM copy gets physically written into SDRAM.
+ SDRAM will be placed into self-refresh during power down */
+ flush_cache_all();
+
+ /*copy suspend function into SRAM */
+ memcpy((void *)SRAM_VA, pnx4008_cpu_standby, pnx4008_cpu_standby_sz);
+
+ /*do suspend */
+ pnx4008_cpu_standby_ptr = (void *)SRAM_VA;
+ pnx4008_cpu_standby_ptr();
+
+ /*restoring portion of SRAM that was used by suspend function */
+ memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_standby_sz);
+
+ clk_enable(pll4_clk);
+
+ local_fiq_enable();
+ local_irq_enable();
+}
+
+static inline void pnx4008_suspend(void)
+{
+ void (*pnx4008_cpu_suspend_ptr) (void);
+
+ local_irq_disable();
+ local_fiq_disable();
+
+ clk_disable(pll4_clk);
+
+ __raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
+ __raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
+
+ /*saving portion of SRAM to be used by suspend function. */
+ memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_suspend_sz);
+
+ /*make sure SRAM copy gets physically written into SDRAM.
+ SDRAM will be placed into self-refresh during power down */
+ flush_cache_all();
+
+ /*copy suspend function into SRAM */
+ memcpy((void *)SRAM_VA, pnx4008_cpu_suspend, pnx4008_cpu_suspend_sz);
+
+ /*do suspend */
+ pnx4008_cpu_suspend_ptr = (void *)SRAM_VA;
+ pnx4008_cpu_suspend_ptr();
+
+ /*restoring portion of SRAM that was used by suspend function */
+ memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_suspend_sz);
+
+ clk_enable(pll4_clk);
+
+ local_fiq_enable();
+ local_irq_enable();
+}
+
+static int pnx4008_pm_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ pnx4008_standby();
+ break;
+ case PM_SUSPEND_MEM:
+ pnx4008_suspend();
+ break;
+ case PM_SUSPEND_DISK:
+ return -ENOTSUPP;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/*
+ * Called after processes are frozen, but before we shut down devices.
+ */
+static int pnx4008_pm_prepare(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ break;
+
+ case PM_SUSPEND_DISK:
+ return -ENOTSUPP;
+ break;
+
+ default:
+ return -EINVAL;
+ break;
+ }
+ return 0;
+}
+
+/*
+ * Called after devices are re-setup, but before processes are thawed.
+ */
+static int pnx4008_pm_finish(suspend_state_t state)
+{
+ return 0;
+}
+
+/*
+ * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
+ */
+static struct pm_ops pnx4008_pm_ops = {
+ .prepare = pnx4008_pm_prepare,
+ .enter = pnx4008_pm_enter,
+ .finish = pnx4008_pm_finish,
+};
+
+static int __init pnx4008_pm_init(void)
+{
+ u32 sram_size_to_allocate;
+
+ pll4_clk = clk_get(0, "ck_pll4");
+ if (IS_ERR(pll4_clk)) {
+ printk(KERN_ERR
+ "PM Suspend cannot acquire ARM(PLL4) clock control\n");
+ return PTR_ERR(pll4_clk);
+ }
+
+ if (pnx4008_cpu_standby_sz > pnx4008_cpu_suspend_sz)
+ sram_size_to_allocate = pnx4008_cpu_standby_sz;
+ else
+ sram_size_to_allocate = pnx4008_cpu_suspend_sz;
+
+ saved_sram = kmalloc(sram_size_to_allocate, GFP_ATOMIC);
+ if (!saved_sram) {
+ printk(KERN_ERR
+ "PM Suspend: cannot allocate memory to save portion of SRAM\n");
+ clk_put(pll4_clk);
+ return -ENOMEM;
+ }
+
+ pm_set_ops(&pnx4008_pm_ops);
+ return 0;
+}
+
+late_initcall(pnx4008_pm_init);
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
new file mode 100644
index 000000000000..2e1e04cc048c
--- /dev/null
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -0,0 +1,69 @@
+/*
+ * linux/arch/arm/mach-pnx4008/serial.c
+ *
+ * PNX4008 UART initialization
+ *
+ * Copyright: MontaVista Software Inc. (c) 2005
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/platform.h>
+#include <asm/arch/hardware.h>
+
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <asm/arch/pm.h>
+
+#include <asm/arch/clock.h>
+
+#define UART_3 0
+#define UART_4 1
+#define UART_5 2
+#define UART_6 3
+#define UART_UNKNOWN (-1)
+
+#define UART3_BASE_VA IO_ADDRESS(PNX4008_UART3_BASE)
+#define UART4_BASE_VA IO_ADDRESS(PNX4008_UART4_BASE)
+#define UART5_BASE_VA IO_ADDRESS(PNX4008_UART5_BASE)
+#define UART6_BASE_VA IO_ADDRESS(PNX4008_UART6_BASE)
+
+#define UART_FCR_OFFSET 8
+#define UART_FIFO_SIZE 64
+
+void pnx4008_uart_init(void)
+{
+ u32 tmp;
+ int i = UART_FIFO_SIZE;
+
+ __raw_writel(0xC1, UART5_BASE_VA + UART_FCR_OFFSET);
+ __raw_writel(0xC1, UART3_BASE_VA + UART_FCR_OFFSET);
+
+ /* Send a NULL to fix the UART HW bug */
+ __raw_writel(0x00, UART5_BASE_VA);
+ __raw_writel(0x00, UART3_BASE_VA);
+
+ while (i--) {
+ tmp = __raw_readl(UART5_BASE_VA);
+ tmp = __raw_readl(UART3_BASE_VA);
+ }
+ __raw_writel(0, UART5_BASE_VA + UART_FCR_OFFSET);
+ __raw_writel(0, UART3_BASE_VA + UART_FCR_OFFSET);
+
+ /* setup wakeup interrupt */
+ start_int_set_rising_edge(SE_U3_RX_INT);
+ start_int_ack(SE_U3_RX_INT);
+ start_int_umask(SE_U3_RX_INT);
+
+ start_int_set_rising_edge(SE_U5_RX_INT);
+ start_int_ack(SE_U5_RX_INT);
+ start_int_umask(SE_U5_RX_INT);
+}
+
diff --git a/arch/arm/mach-pnx4008/sleep.S b/arch/arm/mach-pnx4008/sleep.S
new file mode 100644
index 000000000000..93c802bac269
--- /dev/null
+++ b/arch/arm/mach-pnx4008/sleep.S
@@ -0,0 +1,196 @@
+/*
+ * linux/arch/arm/mach-pnx4008/sleep.S
+ *
+ * PNX4008 support for STOP mode and SDRAM self-refresh
+ *
+ * Authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+
+#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
+#define PWR_CTRL_REG_OFFS 0x44
+
+#define SDRAM_CFG_VA_BASE IO_ADDRESS(PNX4008_SDRAM_CFG_BASE)
+#define MPMC_STATUS_REG_OFFS 0x4
+
+ .text
+
+ENTRY(pnx4008_cpu_suspend)
+ @this function should be entered in Direct run mode.
+
+ @ save registers on stack
+ stmfd sp!, {r0 - r6, lr}
+
+ @ setup Power Manager base address in r4
+ @ and put it's value in r5
+ mov r4, #(PWRMAN_VA_BASE & 0xff000000)
+ orr r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
+ orr r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
+ orr r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
+ ldr r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ setup SDRAM controller base address in r2
+ @ and put it's value in r3
+ mov r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
+ orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
+ orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
+ orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
+ ldr r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
+
+ @ clear SDRAM self-refresh bit latch
+ and r5, r5, #(~(1 << 8))
+ @ clear SDRAM self-refresh bit
+ and r5, r5, #(~(1 << 9))
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ do save current bit settings in r1
+ mov r1, r5
+
+ @ set SDRAM self-refresh bit
+ orr r5, r5, #(1 << 9)
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ set SDRAM self-refresh bit latch
+ orr r5, r5, #(1 << 8)
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ clear SDRAM self-refresh bit latch
+ and r5, r5, #(~(1 << 8))
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ clear SDRAM self-refresh bit
+ and r5, r5, #(~(1 << 9))
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ wait for SDRAM to get into self-refresh mode
+2: ldr r3, [r2, #MPMC_STATUS_REG_OFFS]
+ tst r3, #(1 << 2)
+ beq 2b
+
+ @ to prepare SDRAM to get out of self-refresh mode after wakeup
+ orr r5, r5, #(1 << 7)
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ do enter stop mode
+ orr r5, r5, #(1 << 0)
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ @ sleeping now...
+
+ @ coming out of STOP mode into Direct Run mode
+ @ clear STOP mode and SDRAM self-refresh bits
+ str r1, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ wait for SDRAM to get out self-refresh mode
+3: ldr r3, [r2, #MPMC_STATUS_REG_OFFS]
+ tst r3, #5
+ bne 3b
+
+ @ restore regs and return
+ ldmfd sp!, {r0 - r6, pc}
+
+ENTRY(pnx4008_cpu_suspend_sz)
+ .word . - pnx4008_cpu_suspend
+
+ENTRY(pnx4008_cpu_standby)
+ @ save registers on stack
+ stmfd sp!, {r0 - r6, lr}
+
+ @ setup Power Manager base address in r4
+ @ and put it's value in r5
+ mov r4, #(PWRMAN_VA_BASE & 0xff000000)
+ orr r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
+ orr r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
+ orr r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
+ ldr r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ setup SDRAM controller base address in r2
+ @ and put it's value in r3
+ mov r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
+ orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
+ orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
+ orr r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
+ ldr r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
+
+ @ clear SDRAM self-refresh bit latch
+ and r5, r5, #(~(1 << 8))
+ @ clear SDRAM self-refresh bit
+ and r5, r5, #(~(1 << 9))
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ do save current bit settings in r1
+ mov r1, r5
+
+ @ set SDRAM self-refresh bit
+ orr r5, r5, #(1 << 9)
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ set SDRAM self-refresh bit latch
+ orr r5, r5, #(1 << 8)
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ clear SDRAM self-refresh bit latch
+ and r5, r5, #(~(1 << 8))
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ clear SDRAM self-refresh bit
+ and r5, r5, #(~(1 << 9))
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ wait for SDRAM to get into self-refresh mode
+2: ldr r3, [r2, #MPMC_STATUS_REG_OFFS]
+ tst r3, #(1 << 2)
+ beq 2b
+
+ @ set 'get out of self-refresh mode after wakeup' bit
+ orr r5, r5, #(1 << 7)
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ mcr p15, 0, r0, c7, c0, 4 @ kinda sleeping now...
+
+ @ set SDRAM self-refresh bit latch
+ orr r5, r5, #(1 << 8)
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ clear SDRAM self-refresh bit latch
+ and r5, r5, #(~(1 << 8))
+ str r5, [r4, #PWR_CTRL_REG_OFFS]
+
+ @ wait for SDRAM to get out self-refresh mode
+3: ldr r3, [r2, #MPMC_STATUS_REG_OFFS]
+ tst r3, #5
+ bne 3b
+
+ @ restore regs and return
+ ldmfd sp!, {r0 - r6, pc}
+
+ENTRY(pnx4008_cpu_standby_sz)
+ .word . - pnx4008_cpu_standby
+
+ENTRY(pnx4008_cache_clean_invalidate)
+ stmfd sp!, {r0 - r6, lr}
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
+#else
+1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate
+ bne 1b
+#endif
+ ldmfd sp!, {r0 - r6, pc}
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
new file mode 100644
index 000000000000..4ce680698529
--- /dev/null
+++ b/arch/arm/mach-pnx4008/time.c
@@ -0,0 +1,141 @@
+/*
+ * arch/arm/mach-pnx4008/time.c
+ *
+ * PNX4008 Timers
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev, Grigory Tolstolytkin <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+
+#include <asm/system.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/leds.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <asm/errno.h>
+
+/*! Note: all timers are UPCOUNTING */
+
+/*!
+ * Returns number of us since last clock interrupt. Note that interrupts
+ * will have been disabled by do_gettimeoffset()
+ */
+static unsigned long pnx4008_gettimeoffset(void)
+{
+ u32 ticks_to_match =
+ __raw_readl(HSTIM_MATCH0) - __raw_readl(HSTIM_COUNTER);
+ u32 elapsed = LATCH - ticks_to_match;
+ return (elapsed * (tick_nsec / 1000)) / LATCH;
+}
+
+/*!
+ * IRQ handler for the timer
+ */
+static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ if (__raw_readl(HSTIM_INT) & MATCH0_INT) {
+
+ write_seqlock(&xtime_lock);
+
+ do {
+ timer_tick(regs);
+
+ /*
+ * this algorithm takes care of possible delay
+ * for this interrupt handling longer than a normal
+ * timer period
+ */
+ __raw_writel(__raw_readl(HSTIM_MATCH0) + LATCH,
+ HSTIM_MATCH0);
+ __raw_writel(MATCH0_INT, HSTIM_INT); /* clear interrupt */
+
+ /*
+ * The goal is to keep incrementing HSTIM_MATCH0
+ * register until HSTIM_MATCH0 indicates time after
+ * what HSTIM_COUNTER indicates.
+ */
+ } while ((signed)
+ (__raw_readl(HSTIM_MATCH0) -
+ __raw_readl(HSTIM_COUNTER)) < 0);
+
+ write_sequnlock(&xtime_lock);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction pnx4008_timer_irq = {
+ .name = "PNX4008 Tick Timer",
+ .flags = SA_INTERRUPT | SA_TIMER,
+ .handler = pnx4008_timer_interrupt
+};
+
+/*!
+ * Set up timer and timer interrupt.
+ */
+static __init void pnx4008_setup_timer(void)
+{
+ __raw_writel(RESET_COUNT, MSTIM_CTRL);
+ while (__raw_readl(MSTIM_COUNTER)) ; /* wait for reset to complete. 100% guarantee event */
+ __raw_writel(0, MSTIM_CTRL); /* stop the timer */
+ __raw_writel(0, MSTIM_MCTRL);
+
+ __raw_writel(RESET_COUNT, HSTIM_CTRL);
+ while (__raw_readl(HSTIM_COUNTER)) ; /* wait for reset to complete. 100% guarantee event */
+ __raw_writel(0, HSTIM_CTRL);
+ __raw_writel(0, HSTIM_MCTRL);
+ __raw_writel(0, HSTIM_CCR);
+ __raw_writel(12, HSTIM_PMATCH); /* scale down to 1 MHZ */
+ __raw_writel(LATCH, HSTIM_MATCH0);
+ __raw_writel(MR0_INT, HSTIM_MCTRL);
+
+ setup_irq(HSTIMER_INT, &pnx4008_timer_irq);
+
+ __raw_writel(COUNT_ENAB | DEBUG_EN, HSTIM_CTRL); /*start timer, stop when JTAG active */
+}
+
+/* Timer Clock Control in PM register */
+#define TIMCLK_CTRL_REG IO_ADDRESS((PNX4008_PWRMAN_BASE + 0xBC))
+#define WATCHDOG_CLK_EN 1
+#define TIMER_CLK_EN 2 /* HS and MS timers? */
+
+static u32 timclk_ctrl_reg_save;
+
+void pnx4008_timer_suspend(void)
+{
+ timclk_ctrl_reg_save = __raw_readl(TIMCLK_CTRL_REG);
+ __raw_writel(0, TIMCLK_CTRL_REG); /* disable timers */
+}
+
+void pnx4008_timer_resume(void)
+{
+ __raw_writel(timclk_ctrl_reg_save, TIMCLK_CTRL_REG); /* enable timers */
+}
+
+struct sys_timer pnx4008_timer = {
+ .init = pnx4008_setup_timer,
+ .offset = pnx4008_gettimeoffset,
+ .suspend = pnx4008_timer_suspend,
+ .resume = pnx4008_timer_resume,
+};
+