diff options
Diffstat (limited to 'arch/arm/mach-pxa/include/mach/pxafb.h')
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/pxafb.h | 175 |
1 files changed, 0 insertions, 175 deletions
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h deleted file mode 100644 index 486b4c519ae2..000000000000 --- a/arch/arm/mach-pxa/include/mach/pxafb.h +++ /dev/null @@ -1,175 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/pxafb.h - * - * Support for the xscale frame buffer. - * - * Author: Jean-Frederic Clere - * Created: Sep 22, 2003 - * Copyright: jfclere@sinix.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/fb.h> -#include <mach/regs-lcd.h> - -/* - * Supported LCD connections - * - * bits 0 - 3: for LCD panel type: - * - * STN - for passive matrix - * DSTN - for dual scan passive matrix - * TFT - for active matrix - * - * bits 4 - 9 : for bus width - * bits 10-17 : for AC Bias Pin Frequency - * bit 18 : for output enable polarity - * bit 19 : for pixel clock edge - * bit 20 : for output pixel format when base is RGBT16 - */ -#define LCD_CONN_TYPE(_x) ((_x) & 0x0f) -#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f) - -#define LCD_TYPE_MASK 0xf -#define LCD_TYPE_UNKNOWN 0 -#define LCD_TYPE_MONO_STN 1 -#define LCD_TYPE_MONO_DSTN 2 -#define LCD_TYPE_COLOR_STN 3 -#define LCD_TYPE_COLOR_DSTN 4 -#define LCD_TYPE_COLOR_TFT 5 -#define LCD_TYPE_SMART_PANEL 6 -#define LCD_TYPE_MAX 7 - -#define LCD_MONO_STN_4BPP ((4 << 4) | LCD_TYPE_MONO_STN) -#define LCD_MONO_STN_8BPP ((8 << 4) | LCD_TYPE_MONO_STN) -#define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN) -#define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN) -#define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN) -#define LCD_COLOR_TFT_8BPP ((8 << 4) | LCD_TYPE_COLOR_TFT) -#define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT) -#define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT) -#define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL) -#define LCD_SMART_PANEL_16BPP ((16 << 4) | LCD_TYPE_SMART_PANEL) -#define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL) - -#define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10) -#define LCD_BIAS_ACTIVE_HIGH (0 << 18) -#define LCD_BIAS_ACTIVE_LOW (1 << 18) -#define LCD_PCLK_EDGE_RISE (0 << 19) -#define LCD_PCLK_EDGE_FALL (1 << 19) -#define LCD_ALTERNATE_MAPPING (1 << 20) - -/* - * This structure describes the machine which we are running on. - * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine - * of linux/drivers/video/pxafb.c - */ -struct pxafb_mode_info { - u_long pixclock; - - u_short xres; - u_short yres; - - u_char bpp; - u_int cmap_greyscale:1, - depth:8, - transparency:1, - unused:22; - - /* Parallel Mode Timing */ - u_char hsync_len; - u_char left_margin; - u_char right_margin; - - u_char vsync_len; - u_char upper_margin; - u_char lower_margin; - u_char sync; - - /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details - * Note: - * 1. all parameters in nanosecond (ns) - * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits - * in pxa27x and pxa3xx, initialize them to the same value or - * the larger one will be used - * 3. same to {rd,wr}_pulse_width - * - * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity - * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0 - * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD - */ - unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */ - unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */ - unsigned wr_pulse_width; /* L_PCLK_WR pulse width */ - unsigned rd_pulse_width; /* L_FCLK_RD pulse width */ - unsigned cmd_inh_time; /* Command Inhibit time between two writes */ - unsigned op_hold_time; /* Output Hold time from L_FCLK_RD negation */ -}; - -struct pxafb_mach_info { - struct pxafb_mode_info *modes; - unsigned int num_modes; - - unsigned int lcd_conn; - unsigned long video_mem_size; - - u_int fixed_modes:1, - cmap_inverse:1, - cmap_static:1, - acceleration_enabled:1, - unused:28; - - /* The following should be defined in LCCR0 - * LCCR0_Act or LCCR0_Pas Active or Passive - * LCCR0_Sngl or LCCR0_Dual Single/Dual panel - * LCCR0_Mono or LCCR0_Color Mono/Color - * LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode) - * LCCR0_DMADel(Tcpu) (optional) DMA request delay - * - * The following should not be defined in LCCR0: - * LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM - * LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB - */ - u_int lccr0; - /* The following should be defined in LCCR3 - * LCCR3_OutEnH or LCCR3_OutEnL Output enable polarity - * LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type - * LCCR3_Acb(X) AB Bias pin frequency - * LCCR3_DPC (optional) Double Pixel Clock mode (untested) - * - * The following should not be defined in LCCR3 - * LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp - */ - u_int lccr3; - /* The following should be defined in LCCR4 - * LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2 - * - * All other bits in LCCR4 should be left alone. - */ - u_int lccr4; - void (*pxafb_backlight_power)(int); - void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); - void (*smart_update)(struct fb_info *); -}; - -void pxa_set_fb_info(struct device *, struct pxafb_mach_info *); -unsigned long pxafb_get_hsync_time(struct device *dev); - -#ifdef CONFIG_FB_PXA_SMARTPANEL -extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int); -extern int pxafb_smart_flush(struct fb_info *info); -#else -static inline int pxafb_smart_queue(struct fb_info *info, - uint16_t *cmds, int n) -{ - return 0; -} - -static inline int pxafb_smart_flush(struct fb_info *info) -{ - return 0; -} -#endif |