diff options
Diffstat (limited to 'arch/arm/mach-s3c2443/clock.c')
| -rw-r--r-- | arch/arm/mach-s3c2443/clock.c | 160 |
1 files changed, 7 insertions, 153 deletions
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 38058af48972..1c2c088aa2e8 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -57,18 +57,14 @@ /* clock selections */ -static struct clk clk_i2s_ext = { - .name = "i2s-ext", -}; - /* armdiv * * this clock is sourced from msysclk and can have a number of * divider values applied to it to then be fed into armclk. + * The real clock definition is done in s3c2443-clock.c, + * only the armdiv divisor table must be defined here. */ -/* armdiv divisor table */ - static unsigned int armdiv[16] = { [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1, [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2, @@ -80,92 +76,6 @@ static unsigned int armdiv[16] = { [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16, }; -static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0) -{ - clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; - - return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]; -} - -static unsigned long s3c2443_armclk_roundrate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - unsigned long calc; - unsigned best = 256; /* bigger than any value */ - unsigned div; - int ptr; - - for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) { - div = armdiv[ptr]; - calc = parent / div; - if (calc <= rate && div < best) - best = div; - } - - return parent / best; -} - -static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - unsigned long calc; - unsigned div; - unsigned best = 256; /* bigger than any value */ - int ptr; - int val = -1; - - for (ptr = 0; ptr < ARRAY_SIZE(armdiv); ptr++) { - div = armdiv[ptr]; - calc = parent / div; - if (calc <= rate && div < best) { - best = div; - val = ptr; - } - } - - if (val >= 0) { - unsigned long clkcon0; - - clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK; - clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; - __raw_writel(clkcon0, S3C2443_CLKDIV0); - } - - return (val == -1) ? -EINVAL : 0; -} - -static struct clk clk_armdiv = { - .name = "armdiv", - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .round_rate = s3c2443_armclk_roundrate, - .set_rate = s3c2443_armclk_setrate, - }, -}; - -/* armclk - * - * this is the clock fed into the ARM core itself, from armdiv or from hclk. - */ - -static struct clk *clk_arm_sources[] = { - [0] = &clk_armdiv, - [1] = &clk_h, -}; - -static struct clksrc_clk clk_arm = { - .clk = { - .name = "armclk", - }, - .sources = &(struct clksrc_sources) { - .sources = clk_arm_sources, - .nr_sources = ARRAY_SIZE(clk_arm_sources), - }, - .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 }, -}; - /* hsspi * * high-speed spi clock, sourced from esysclk @@ -173,7 +83,7 @@ static struct clksrc_clk clk_arm = { static struct clksrc_clk clk_hsspi = { .clk = { - .name = "hsspi", + .name = "hsspi-if", .parent = &clk_esysclk.clk, .ctrlbit = S3C2443_SCLKCON_HSSPICLK, .enable = s3c2443_clkcon_enable_s, @@ -235,48 +145,6 @@ static struct clk clk_hsmmc = { }, }; -/* i2s_eplldiv - * - * This clock is the output from the I2S divisor of ESYSCLK, and is separate - * from the mux that comes after it (cannot merge into one single clock) -*/ - -static struct clksrc_clk clk_i2s_eplldiv = { - .clk = { - .name = "i2s-eplldiv", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, }, -}; - -/* i2s-ref - * - * i2s bus reference clock, selectable from external, esysclk or epllref - * - * Note, this used to be two clocks, but was compressed into one. -*/ - -struct clk *clk_i2s_srclist[] = { - [0] = &clk_i2s_eplldiv.clk, - [1] = &clk_i2s_ext, - [2] = &clk_epllref.clk, - [3] = &clk_epllref.clk, -}; - -static struct clksrc_clk clk_i2s = { - .clk = { - .name = "i2s-if", - .ctrlbit = S3C2443_SCLKCON_I2SCLK, - .enable = s3c2443_clkcon_enable_s, - - }, - .sources = &(struct clksrc_sources) { - .sources = clk_i2s_srclist, - .nr_sources = ARRAY_SIZE(clk_i2s_srclist), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, -}; - /* standard clock definitions */ static struct clk init_clocks_off[] = { @@ -286,11 +154,6 @@ static struct clk init_clocks_off[] = { .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_SDI, }, { - .name = "iis", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIS, - }, { .name = "spi", .devname = "s3c2410-spi.0", .parent = &clk_p, @@ -305,27 +168,20 @@ static struct clk init_clocks_off[] = { } }; -static struct clk init_clocks[] = { -}; - /* clocks to add straight away */ static struct clksrc_clk *clksrcs[] __initdata = { - &clk_arm, - &clk_i2s_eplldiv, - &clk_i2s, &clk_hsspi, &clk_hsmmc_div, }; static struct clk *clks[] __initdata = { &clk_hsmmc, - &clk_armdiv, }; void __init_or_cpufreq s3c2443_setup_clocks(void) { - s3c2443_common_setup_clocks(s3c2443_get_mpll, s3c2443_fclk_div); + s3c2443_common_setup_clocks(s3c2443_get_mpll); } void __init s3c2443_init_clocks(int xtal) @@ -336,7 +192,9 @@ void __init s3c2443_init_clocks(int xtal) clk_epll.rate = s3c2443_get_epll(epllcon, xtal); clk_epll.parent = &clk_epllref.clk; - s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div); + s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, + armdiv, ARRAY_SIZE(armdiv), + S3C2443_CLKDIV0_ARMDIV_MASK); s3c2443_setup_clocks(); @@ -345,10 +203,6 @@ void __init s3c2443_init_clocks(int xtal) for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) s3c_register_clksrc(clksrcs[ptr], 1); - /* register clocks from clock array */ - - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - /* We must be careful disabling the clocks we are not intending to * be using at boot time, as subsystems such as the LCD which do * their own DMA requests to the bus can cause the system to lockup |