diff options
Diffstat (limited to 'arch/arm/mach-s3c24xx/common.c')
| -rw-r--r-- | arch/arm/mach-s3c24xx/common.c | 303 |
1 files changed, 303 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c new file mode 100644 index 000000000000..56cdd34cce41 --- /dev/null +++ b/arch/arm/mach-s3c24xx/common.c @@ -0,0 +1,303 @@ +/* linux/arch/arm/plat-s3c24xx/cpu.c + * + * Copyright (c) 2004-2005 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * Ben Dooks <ben@simtec.co.uk> + * + * Common code for S3C24XX machines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/regs-clock.h> +#include <asm/irq.h> +#include <asm/cacheflush.h> +#include <asm/system_info.h> +#include <asm/system_misc.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/regs-clock.h> +#include <mach/regs-gpio.h> +#include <plat/regs-serial.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> +#include <plat/s3c2410.h> +#include <plat/s3c2412.h> +#include <plat/s3c2416.h> +#include <plat/s3c244x.h> +#include <plat/s3c2443.h> +#include <plat/cpu-freq.h> +#include <plat/pll.h> + +/* table of supported CPUs */ + +static const char name_s3c2410[] = "S3C2410"; +static const char name_s3c2412[] = "S3C2412"; +static const char name_s3c2416[] = "S3C2416/S3C2450"; +static const char name_s3c2440[] = "S3C2440"; +static const char name_s3c2442[] = "S3C2442"; +static const char name_s3c2442b[] = "S3C2442B"; +static const char name_s3c2443[] = "S3C2443"; +static const char name_s3c2410a[] = "S3C2410A"; +static const char name_s3c2440a[] = "S3C2440A"; + +static struct cpu_table cpu_ids[] __initdata = { + { + .idcode = 0x32410000, + .idmask = 0xffffffff, + .map_io = s3c2410_map_io, + .init_clocks = s3c2410_init_clocks, + .init_uarts = s3c2410_init_uarts, + .init = s3c2410_init, + .name = name_s3c2410 + }, + { + .idcode = 0x32410002, + .idmask = 0xffffffff, + .map_io = s3c2410_map_io, + .init_clocks = s3c2410_init_clocks, + .init_uarts = s3c2410_init_uarts, + .init = s3c2410a_init, + .name = name_s3c2410a + }, + { + .idcode = 0x32440000, + .idmask = 0xffffffff, + .map_io = s3c2440_map_io, + .init_clocks = s3c244x_init_clocks, + .init_uarts = s3c244x_init_uarts, + .init = s3c2440_init, + .name = name_s3c2440 + }, + { + .idcode = 0x32440001, + .idmask = 0xffffffff, + .map_io = s3c2440_map_io, + .init_clocks = s3c244x_init_clocks, + .init_uarts = s3c244x_init_uarts, + .init = s3c2440_init, + .name = name_s3c2440a + }, + { + .idcode = 0x32440aaa, + .idmask = 0xffffffff, + .map_io = s3c2442_map_io, + .init_clocks = s3c244x_init_clocks, + .init_uarts = s3c244x_init_uarts, + .init = s3c2442_init, + .name = name_s3c2442 + }, + { + .idcode = 0x32440aab, + .idmask = 0xffffffff, + .map_io = s3c2442_map_io, + .init_clocks = s3c244x_init_clocks, + .init_uarts = s3c244x_init_uarts, + .init = s3c2442_init, + .name = name_s3c2442b + }, + { + .idcode = 0x32412001, + .idmask = 0xffffffff, + .map_io = s3c2412_map_io, + .init_clocks = s3c2412_init_clocks, + .init_uarts = s3c2412_init_uarts, + .init = s3c2412_init, + .name = name_s3c2412, + }, + { /* a newer version of the s3c2412 */ + .idcode = 0x32412003, + .idmask = 0xffffffff, + .map_io = s3c2412_map_io, + .init_clocks = s3c2412_init_clocks, + .init_uarts = s3c2412_init_uarts, + .init = s3c2412_init, + .name = name_s3c2412, + }, + { /* a strange version of the s3c2416 */ + .idcode = 0x32450003, + .idmask = 0xffffffff, + .map_io = s3c2416_map_io, + .init_clocks = s3c2416_init_clocks, + .init_uarts = s3c2416_init_uarts, + .init = s3c2416_init, + .name = name_s3c2416, + }, + { + .idcode = 0x32443001, + .idmask = 0xffffffff, + .map_io = s3c2443_map_io, + .init_clocks = s3c2443_init_clocks, + .init_uarts = s3c2443_init_uarts, + .init = s3c2443_init, + .name = name_s3c2443, + }, +}; + +/* minimal IO mapping */ + +static struct map_desc s3c_iodesc[] __initdata = { + IODESC_ENT(GPIO), + IODESC_ENT(IRQ), + IODESC_ENT(MEMCTRL), + IODESC_ENT(UART) +}; + +/* read cpu identificaiton code */ + +static unsigned long s3c24xx_read_idcode_v5(void) +{ +#if defined(CONFIG_CPU_S3C2416) + /* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */ + + u32 gs = __raw_readl(S3C24XX_GSTATUS1); + + /* test for s3c2416 or similar device */ + if ((gs >> 16) == 0x3245) + return gs; +#endif + +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) + return __raw_readl(S3C2412_GSTATUS1); +#else + return 1UL; /* don't look like an 2400 */ +#endif +} + +static unsigned long s3c24xx_read_idcode_v4(void) +{ + return __raw_readl(S3C2410_GSTATUS1); +} + +static void s3c24xx_default_idle(void) +{ + unsigned long tmp; + int i; + + /* idle the system by using the idle mode which will wait for an + * interrupt to happen before restarting the system. + */ + + /* Warning: going into idle state upsets jtag scanning */ + + __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); + + /* the samsung port seems to do a loop and then unset idle.. */ + for (i = 0; i < 50; i++) + tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ + + /* this bit is not cleared on re-start... */ + + __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, + S3C2410_CLKCON); +} + +void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) +{ + arm_pm_idle = s3c24xx_default_idle; + + /* initialise the io descriptors we need for initialisation */ + iotable_init(mach_desc, size); + iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); + + if (cpu_architecture() >= CPU_ARCH_ARMv5) { + samsung_cpu_id = s3c24xx_read_idcode_v5(); + } else { + samsung_cpu_id = s3c24xx_read_idcode_v4(); + } + s3c24xx_init_cpu(); + + s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids)); +} + +/* Serial port registrations */ + +static struct resource s3c2410_uart0_resource[] = { + [0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K), + [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \ + IRQ_S3CUART_ERR0 - IRQ_S3CUART_RX0 + 1, \ + NULL, IORESOURCE_IRQ) +}; + +static struct resource s3c2410_uart1_resource[] = { + [0] = DEFINE_RES_MEM(S3C2410_PA_UART1, SZ_16K), + [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX1, \ + IRQ_S3CUART_ERR1 - IRQ_S3CUART_RX1 + 1, \ + NULL, IORESOURCE_IRQ) +}; + +static struct resource s3c2410_uart2_resource[] = { + [0] = DEFINE_RES_MEM(S3C2410_PA_UART2, SZ_16K), + [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX2, \ + IRQ_S3CUART_ERR2 - IRQ_S3CUART_RX2 + 1, \ + NULL, IORESOURCE_IRQ) +}; + +static struct resource s3c2410_uart3_resource[] = { + [0] = DEFINE_RES_MEM(S3C2443_PA_UART3, SZ_16K), + [1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX3, \ + IRQ_S3CUART_ERR3 - IRQ_S3CUART_RX3 + 1, \ + NULL, IORESOURCE_IRQ) +}; + +struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { + [0] = { + .resources = s3c2410_uart0_resource, + .nr_resources = ARRAY_SIZE(s3c2410_uart0_resource), + }, + [1] = { + .resources = s3c2410_uart1_resource, + .nr_resources = ARRAY_SIZE(s3c2410_uart1_resource), + }, + [2] = { + .resources = s3c2410_uart2_resource, + .nr_resources = ARRAY_SIZE(s3c2410_uart2_resource), + }, + [3] = { + .resources = s3c2410_uart3_resource, + .nr_resources = ARRAY_SIZE(s3c2410_uart3_resource), + }, +}; + +/* initialise all the clocks */ + +void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk, + unsigned long hclk, + unsigned long pclk) +{ + clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON), + clk_xtal.rate); + + clk_mpll.rate = fclk; + clk_h.rate = hclk; + clk_p.rate = pclk; + clk_f.rate = fclk; +} |