4 files changed, 14 insertions, 56 deletions
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
deleted file mode 100644
index c9b95325b672..000000000000
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <linux/serial_s3c.h>
-#include <mach/map.h>
-
-	/* note, for the boot process to work we have to keep the UART
-	 * virtual address aligned to an 1MiB boundary for the L1
-	 * mapping the head code makes. We keep the UART virtual address
-	 * aligned and add in the offset when we load the value here.
-	 */
-
-	.macro addruart, rp, rv, tmp
-		ldr	\rp, = S3C_PA_UART
-		ldr	\rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
-		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <debug/samsung.S>
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
index 9c81fac3b2d5..1d3636512e33 100644
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
@@ -14,6 +14,8 @@
 #ifndef GPIO_SAMSUNG_S3C64XX_H
 #define GPIO_SAMSUNG_S3C64XX_H
 
+#ifdef CONFIG_GPIO_SAMSUNG
+
 /* GPIO bank sizes */
 #define S3C64XX_GPIO_A_NR	(8)
 #define S3C64XX_GPIO_B_NR	(7)
@@ -90,5 +92,6 @@ enum s3c_gpio_number {
 /* define the number of gpios we need to the one after the GPQ() range */
 #define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
 
+#endif /* GPIO_SAMSUNG */
 #endif /* GPIO_SAMSUNG_S3C64XX_H */
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 67bbd1dd04c2..3ceb00b5de07 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -156,25 +156,11 @@
 
 #define IRQ_EINT_GROUP(group, no)	(IRQ_EINT_GROUP##group##_BASE + (no))
 
-/* Define a group of interrupts for board-specific use (eg, for MFD
- * interrupt controllers). */
+/* Some boards have their own IRQs behind this */
 #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
 
-#ifdef CONFIG_MACH_WLF_CRAGG_6410
-#define IRQ_BOARD_NR 160
-#elif defined(CONFIG_SMDK6410_WM1190_EV1)
-#define IRQ_BOARD_NR 64
-#elif defined(CONFIG_SMDK6410_WM1192_EV1)
-#define IRQ_BOARD_NR 64
-#else
-#define IRQ_BOARD_NR 16
-#endif
-
-#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS	(IRQ_BOARD_END + 1)
+/* Set the default nr_irqs, boards can override if necessary */
+#define S3C64XX_NR_IRQS	IRQ_BOARD_START
 
 /* Compatibility */
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index a30a1e3ffc6a..4a285e97afff 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -16,8 +16,11 @@
 #define __MACH_S3C64XX_PM_CORE_H __FILE__
 
 #include <linux/serial_s3c.h>
+#include <linux/delay.h>
 
 #include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/map.h>
 
 static inline void s3c_pm_debug_init_uart(void)
 {
@@ -56,9 +59,13 @@ static inline void s3c_pm_arch_show_resume_irqs(void)
 
 /* make these defines, we currently do not have any need to change
  * the IRQ wake controls depending on the CPU we are running on */
-
+#ifdef CONFIG_PM_SLEEP
 #define s3c_irqwake_eintallow	((1 << 28) - 1)
 #define s3c_irqwake_intallow	(~0)
+#else
+#define s3c_irqwake_eintallow 0
+#define s3c_irqwake_intallow  0
+#endif
 
 static inline void s3c_pm_arch_update_uart(void __iomem *regs,
 					   struct pm_uart_save *save)