diff options
Diffstat (limited to 'arch/arm/mach-shmobile/board-mackerel.c')
| -rw-r--r-- | arch/arm/mach-shmobile/board-mackerel.c | 478 |
1 files changed, 425 insertions, 53 deletions
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7da2ca24229d..d41c01f83f15 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -39,10 +39,12 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/pm_runtime.h> #include <linux/smsc911x.h> #include <linux/sh_intc.h> #include <linux/tca6416_keypad.h> #include <linux/usb/r8a66597.h> +#include <linux/usb/renesas_usbhs.h> #include <video/sh_mobile_hdmi.h> #include <video/sh_mobile_lcdc.h> @@ -124,7 +126,7 @@ * ------+--------------------+--------------------+------- * IRQ0 | ICR1A.IRQ0SA=0010 | SDHI2 card detect | Low * IRQ6 | ICR1A.IRQ6SA=0011 | Ether(LAN9220) | High - * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Tuch Panel | Low + * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Touch Panel | Low * IRQ8 | ICR2A.IRQ8SA=0010 | MMC/SD card detect | Low * IRQ9 | ICR2A.IRQ9SA=0010 | KEY(TCA6408) | Low * IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345) | High @@ -143,7 +145,30 @@ * open | external VBUS | Function * * *1 - * CN31 is used as Host in Linux. + * CN31 is used as + * CONFIG_USB_R8A66597_HCD Host + * CONFIG_USB_RENESAS_USBHS Function + * + * CAUTION + * + * renesas_usbhs driver can use external interrupt mode + * (which come from USB-PHY) or autonomy mode (it use own interrupt) + * for detecting connection/disconnection when Function. + * USB will be power OFF while it has been disconnecting + * if external interrupt mode, and it is always power ON if autonomy mode, + * + * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", + * because Touchscreen is using IRQ7-PORT40. + * It is impossible to use IRQ7 demux on this board. + * + * We can use external interrupt mode USB-Function on "USB1". + * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. + * But don't select both drivers in same time. + * These uses same IRQ number for request_irq(), and aren't supporting + * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE. + * + * Actually these are old/new version of USB driver. + * This mean its register will be broken if it supports shared IRQ, */ /* @@ -185,6 +210,7 @@ * FIXME !! * * gpio_no_direction + * gpio_pull_down * are quick_hack. * * current gpio frame work doesn't have @@ -196,6 +222,16 @@ static void __init gpio_no_direction(u32 addr) __raw_writeb(0x00, addr); } +static void __init gpio_pull_down(u32 addr) +{ + u8 data = __raw_readb(addr); + + data &= 0x0F; + data |= 0xA0; + + __raw_writeb(data, addr); +} + /* MTD */ static struct mtd_partition nor_flash_partitions[] = { { @@ -279,6 +315,30 @@ static struct platform_device smc911x_device = { }, }; +/* MERAM */ +static struct sh_mobile_meram_info mackerel_meram_info = { + .addr_mode = SH_MOBILE_MERAM_MODE1, +}; + +static struct resource meram_resources[] = { + [0] = { + .name = "MERAM", + .start = 0xe8000000, + .end = 0xe81fffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device meram_device = { + .name = "sh_mobile_meram", + .id = 0, + .num_resources = ARRAY_SIZE(meram_resources), + .resource = meram_resources, + .dev = { + .platform_data = &mackerel_meram_info, + }, +}; + /* LCDC */ static struct fb_videomode mackerel_lcdc_modes[] = { { @@ -307,7 +367,23 @@ static int mackerel_get_brightness(void *board_data) return gpio_get_value(GPIO_PORT31); } +static struct sh_mobile_meram_cfg lcd_meram_cfg = { + .icb[0] = { + .marker_icb = 28, + .cache_icb = 24, + .meram_offset = 0x0, + .meram_size = 0x40, + }, + .icb[1] = { + .marker_icb = 29, + .cache_icb = 25, + .meram_offset = 0x40, + .meram_size = 0x40, + }, +}; + static struct sh_mobile_lcdc_info lcdc_info = { + .meram_dev = &mackerel_meram_info, .clock_source = LCDC_CLK_BUS, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, @@ -327,6 +403,7 @@ static struct sh_mobile_lcdc_info lcdc_info = { .name = "sh_mobile_lcdc_bl", .max_brightness = 1, }, + .meram_cfg = &lcd_meram_cfg, } }; @@ -353,8 +430,23 @@ static struct platform_device lcdc_device = { }, }; +static struct sh_mobile_meram_cfg hdmi_meram_cfg = { + .icb[0] = { + .marker_icb = 30, + .cache_icb = 26, + .meram_offset = 0x80, + .meram_size = 0x100, + }, + .icb[1] = { + .marker_icb = 31, + .cache_icb = 27, + .meram_offset = 0x180, + .meram_size = 0x100, + }, +}; /* HDMI */ static struct sh_mobile_lcdc_info hdmi_lcdc_info = { + .meram_dev = &mackerel_meram_info, .clock_source = LCDC_CLK_EXTERNAL, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, @@ -362,6 +454,7 @@ static struct sh_mobile_lcdc_info hdmi_lcdc_info = { .interface_type = RGB24, .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, + .meram_cfg = &hdmi_meram_cfg, } }; @@ -458,12 +551,6 @@ static void __init hdmi_init_pm_clock(void) goto out; } - ret = clk_enable(&sh7372_pllc2_clk); - if (ret < 0) { - pr_err("Cannot enable pllc2 clock\n"); - goto out; - } - pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); @@ -475,7 +562,121 @@ out: clk_put(hdmi_ick); } -/* USB1 (Host) */ +/* USBHS0 is connected to CN22 which takes a USB Mini-B plug + * + * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug, + * but on this particular board IRQ7 is already used by + * the touch screen. This leaves us with software polling. + */ +#define USBHS0_POLL_INTERVAL (HZ * 5) + +struct usbhs_private { + unsigned int usbphyaddr; + unsigned int usbcrcaddr; + struct renesas_usbhs_platform_info info; + struct delayed_work work; + struct platform_device *pdev; +}; + +#define usbhs_get_priv(pdev) \ + container_of(renesas_usbhs_get_info(pdev), \ + struct usbhs_private, info) + +#define usbhs_is_connected(priv) \ + (!((1 << 7) & __raw_readw(priv->usbcrcaddr))) + +static int usbhs_get_vbus(struct platform_device *pdev) +{ + return usbhs_is_connected(usbhs_get_priv(pdev)); +} + +static void usbhs_phy_reset(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + /* init phy */ + __raw_writew(0x8a0a, priv->usbcrcaddr); +} + +static int usbhs0_get_id(struct platform_device *pdev) +{ + return USBHS_GADGET; +} + +static void usbhs0_work_function(struct work_struct *work) +{ + struct usbhs_private *priv = container_of(work, struct usbhs_private, + work.work); + + renesas_usbhs_call_notify_hotplug(priv->pdev); + schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL); +} + +static int usbhs0_hardware_init(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + priv->pdev = pdev; + INIT_DELAYED_WORK(&priv->work, usbhs0_work_function); + schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL); + return 0; +} + +static void usbhs0_hardware_exit(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + cancel_delayed_work_sync(&priv->work); +} + +static struct usbhs_private usbhs0_private = { + .usbcrcaddr = 0xe605810c, /* USBCR2 */ + .info = { + .platform_callback = { + .hardware_init = usbhs0_hardware_init, + .hardware_exit = usbhs0_hardware_exit, + .phy_reset = usbhs_phy_reset, + .get_id = usbhs0_get_id, + .get_vbus = usbhs_get_vbus, + }, + .driver_param = { + .buswait_bwait = 4, + }, + }, +}; + +static struct resource usbhs0_resources[] = { + [0] = { + .name = "USBHS0", + .start = 0xe6890000, + .end = 0xe68900e6 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x1ca0) /* USB0_USB0I0 */, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usbhs0_device = { + .name = "renesas_usbhs", + .id = 0, + .dev = { + .platform_data = &usbhs0_private.info, + }, + .num_resources = ARRAY_SIZE(usbhs0_resources), + .resource = usbhs0_resources, +}; + +/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug + * + * Use J30 to select between Host and Function. This setting + * can however not be detected by software. Hotplug of USBHS1 + * is provided via IRQ8. + */ +#define IRQ8 evt2irq(0x0300) + +/* USBHS1 USB Host support via r8a66597_hcd */ static void usb1_host_port_power(int port, int power) { if (!power) /* only power-on is supported for now */ @@ -492,9 +693,9 @@ static struct r8a66597_platdata usb1_host_data = { static struct resource usb1_host_resources[] = { [0] = { - .name = "USBHS", - .start = 0xE68B0000, - .end = 0xE68B00E6 - 1, + .name = "USBHS1", + .start = 0xe68b0000, + .end = 0xe68b00e6 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -515,6 +716,127 @@ static struct platform_device usb1_host_device = { .resource = usb1_host_resources, }; +/* USBHS1 USB Function support via renesas_usbhs */ + +#define USB_PHY_MODE (1 << 4) +#define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) +#define USB_PHY_ON (1 << 1) +#define USB_PHY_OFF (1 << 0) +#define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF) + +static irqreturn_t usbhs1_interrupt(int irq, void *data) +{ + struct platform_device *pdev = data; + struct usbhs_private *priv = usbhs_get_priv(pdev); + + dev_dbg(&pdev->dev, "%s\n", __func__); + + renesas_usbhs_call_notify_hotplug(pdev); + + /* clear status */ + __raw_writew(__raw_readw(priv->usbphyaddr) | USB_PHY_INT_CLR, + priv->usbphyaddr); + + return IRQ_HANDLED; +} + +static int usbhs1_hardware_init(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + int ret; + + /* clear interrupt status */ + __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); + + ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH, + dev_name(&pdev->dev), pdev); + if (ret) { + dev_err(&pdev->dev, "request_irq err\n"); + return ret; + } + + /* enable USB phy interrupt */ + __raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->usbphyaddr); + + return 0; +} + +static void usbhs1_hardware_exit(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + /* clear interrupt status */ + __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); + + free_irq(IRQ8, pdev); +} + +static int usbhs1_get_id(struct platform_device *pdev) +{ + return USBHS_GADGET; +} + +static u32 usbhs1_pipe_cfg[] = { + USB_ENDPOINT_XFER_CONTROL, + USB_ENDPOINT_XFER_ISOC, + USB_ENDPOINT_XFER_ISOC, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, +}; + +static struct usbhs_private usbhs1_private = { + .usbphyaddr = 0xe60581e2, /* USBPHY1INTAP */ + .usbcrcaddr = 0xe6058130, /* USBCR4 */ + .info = { + .platform_callback = { + .hardware_init = usbhs1_hardware_init, + .hardware_exit = usbhs1_hardware_exit, + .get_id = usbhs1_get_id, + .phy_reset = usbhs_phy_reset, + .get_vbus = usbhs_get_vbus, + }, + .driver_param = { + .buswait_bwait = 4, + .pipe_type = usbhs1_pipe_cfg, + .pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg), + }, + }, +}; + +static struct resource usbhs1_resources[] = { + [0] = { + .name = "USBHS1", + .start = 0xe68b0000, + .end = 0xe68b00e6 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usbhs1_device = { + .name = "renesas_usbhs", + .id = 1, + .dev = { + .platform_data = &usbhs1_private.info, + }, + .num_resources = ARRAY_SIZE(usbhs1_resources), + .resource = usbhs1_resources, +}; + /* LED */ static struct gpio_led mackerel_leds[] = { { @@ -676,6 +998,17 @@ static int slot_cn7_get_cd(struct platform_device *pdev) } /* SDHI0 */ +static irqreturn_t mackerel_sdhi0_gpio_cd(int irq, void *arg) +{ + struct device *dev = arg; + struct sh_mobile_sdhi_info *info = dev->platform_data; + struct tmio_mmc_data *pdata = info->pdata; + + tmio_mmc_cd_wakeup(pdata); + + return IRQ_HANDLED; +} + static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, @@ -690,7 +1023,15 @@ static struct resource sdhi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0e00) /* SDHI0 */, + .start = evt2irq(0x0e00) /* SDHI0_SDHI0I0 */, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */, .flags = IORESOURCE_IRQ, }, }; @@ -705,7 +1046,7 @@ static struct platform_device sdhi0_device = { }, }; -#if !defined(CONFIG_MMC_SH_MMCIF) +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) /* SDHI1 */ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, @@ -725,7 +1066,15 @@ static struct resource sdhi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0e80), + .start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */ + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */ + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */ .flags = IORESOURCE_IRQ, }, }; @@ -768,7 +1117,15 @@ static struct resource sdhi2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x1200), + .start = evt2irq(0x1200), /* SDHI2_SDHI2I0 */ + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = evt2irq(0x1220), /* SDHI2_SDHI2I1 */ + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = evt2irq(0x1240), /* SDHI2_SDHI2I2 */ .flags = IORESOURCE_IRQ, }, }; @@ -803,6 +1160,15 @@ static struct resource sh_mmcif_resources[] = { }, }; +static struct sh_mmcif_dma sh_mmcif_dma = { + .chan_priv_rx = { + .slave_id = SHDMA_SLAVE_MMCIF_RX, + }, + .chan_priv_tx = { + .slave_id = SHDMA_SLAVE_MMCIF_TX, + }, +}; + static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -810,6 +1176,7 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, + .dma = &sh_mmcif_dma, }; static struct platform_device sh_mmcif_device = { @@ -825,8 +1192,8 @@ static struct platform_device sh_mmcif_device = { }; -static int mackerel_camera_add(struct soc_camera_link *icl, struct device *dev); -static void mackerel_camera_del(struct soc_camera_link *icl); +static int mackerel_camera_add(struct soc_camera_device *icd); +static void mackerel_camera_del(struct soc_camera_device *icd); static int camera_set_capture(struct soc_camera_platform_info *info, int enable) @@ -858,37 +1225,22 @@ static struct soc_camera_link camera_link = { .priv = &camera_info, }; -static void dummy_release(struct device *dev) +static struct platform_device *camera_device; + +static void mackerel_camera_release(struct device *dev) { + soc_camera_platform_release(&camera_device); } -static struct platform_device camera_device = { - .name = "soc_camera_platform", - .dev = { - .platform_data = &camera_info, - .release = dummy_release, - }, -}; - -static int mackerel_camera_add(struct soc_camera_link *icl, - struct device *dev) +static int mackerel_camera_add(struct soc_camera_device *icd) { - if (icl != &camera_link) - return -ENODEV; - - camera_info.dev = dev; - - return platform_device_register(&camera_device); + return soc_camera_platform_add(icd, &camera_device, &camera_link, + mackerel_camera_release, 0); } -static void mackerel_camera_del(struct soc_camera_link *icl) +static void mackerel_camera_del(struct soc_camera_device *icd) { - if (icl != &camera_link) - return; - - platform_device_unregister(&camera_device); - memset(&camera_device.dev.kobj, 0, - sizeof(camera_device.dev.kobj)); + soc_camera_platform_del(icd, camera_device, &camera_link); } static struct sh_mobile_ceu_info sh_mobile_ceu_info = { @@ -935,12 +1287,14 @@ static struct platform_device *mackerel_devices[] __initdata = { &smc911x_device, &lcdc_device, &usb1_host_device, + &usbhs1_device, + &usbhs0_device, &leds_device, &fsi_device, &fsi_ak4643_device, &fsi_hdmi_device, &sdhi0_device, -#if !defined(CONFIG_MMC_SH_MMCIF) +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) &sdhi1_device, #endif &sdhi2_device, @@ -949,6 +1303,7 @@ static struct platform_device *mackerel_devices[] __initdata = { &mackerel_camera, &hdmi_lcdc_device, &hdmi_device, + &meram_device, }; /* Keypad Initialization */ @@ -1030,12 +1385,15 @@ static void __init mackerel_map_io(void) #define GPIO_PORT9CR 0xE6051009 #define GPIO_PORT10CR 0xE605100A +#define GPIO_PORT167CR 0xE60520A7 +#define GPIO_PORT168CR 0xE60520A8 #define SRCR4 0xe61580bc #define USCCR1 0xE6058144 static void __init mackerel_init(void) { u32 srcr4; struct clk *clk; + int ret; sh7372_pinmux_init(); @@ -1081,16 +1439,17 @@ static void __init mackerel_init(void) gpio_request(GPIO_PORT151, NULL); /* LCDDON */ gpio_direction_output(GPIO_PORT151, 1); - /* USB enable */ - gpio_request(GPIO_FN_VBUS0_1, NULL); - gpio_request(GPIO_FN_IDIN_1_18, NULL); - gpio_request(GPIO_FN_PWEN_1_115, NULL); - gpio_request(GPIO_FN_OVCN_1_114, NULL); - gpio_request(GPIO_FN_EXTLP_1, NULL); - gpio_request(GPIO_FN_OVCN2_1, NULL); + /* USBHS0 */ + gpio_request(GPIO_FN_VBUS0_0, NULL); + gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */ + + /* USBHS1 */ + gpio_request(GPIO_FN_VBUS0_1, NULL); + gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ + gpio_request(GPIO_FN_IDIN_1_113, NULL); - /* setup USB phy */ - __raw_writew(0x8a0a, 0xE6058130); /* USBCR4 */ + /* USB phy tweak to make the r8a66597_hcd host driver work */ + __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */ /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); @@ -1140,7 +1499,14 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); -#if !defined(CONFIG_MMC_SH_MMCIF) + ret = request_irq(evt2irq(0x3340), mackerel_sdhi0_gpio_cd, + IRQF_TRIGGER_FALLING, "sdhi0 cd", &sdhi0_device.dev); + if (!ret) + sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD; + else + pr_err("Cannot get IRQ #%d: %d\n", evt2irq(0x3340), ret); + +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) /* enable SDHI1 */ gpio_request(GPIO_FN_SDHICMD1, NULL); gpio_request(GPIO_FN_SDHICLK1, NULL); @@ -1215,7 +1581,13 @@ static void __init mackerel_init(void) platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices)); + sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device); + sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device); + sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device); + hdmi_init_pm_clock(); + sh7372_pm_init(); + pm_clk_add(&fsi_device.dev, "spu2"); } static void __init mackerel_timer_init(void) |