diff options
Diffstat (limited to 'arch/arm/mach-shmobile')
| -rw-r--r-- | arch/arm/mach-shmobile/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/board-lager-reference.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/board-lager.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/clock-r8a7790.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/include/mach/r8a7790.h | 6 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/include/mach/rcar-gen2.h | 8 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/setup-r8a7790.c | 68 | ||||
| -rw-r--r-- | arch/arm/mach-shmobile/setup-rcar-gen2.c | 91 |
8 files changed, 106 insertions, 74 deletions
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index d30ec1a427ec..6b7a02ee8b93 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o +obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o setup-rcar-gen2.o obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c index d39a91b3ba48..1a1a4a888632 100644 --- a/arch/arm/mach-shmobile/board-lager-reference.c +++ b/arch/arm/mach-shmobile/board-lager-reference.c @@ -40,7 +40,7 @@ static const char *lager_boards_compat_dt[] __initdata = { DT_MACHINE_START(LAGER_DT, "lager") .smp = smp_ops(r8a7790_smp_ops), .init_early = r8a7790_init_early, + .init_time = rcar_gen2_timer_init, .init_machine = lager_add_standard_devices, - .init_time = r8a7790_timer_init, .dt_compat = lager_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index ef3baaa79e6d..230bc9d67852 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -163,7 +163,7 @@ static const char *lager_boards_compat_dt[] __initdata = { DT_MACHINE_START(LAGER_DT, "lager") .smp = smp_ops(r8a7790_smp_ops), .init_early = r8a7790_init_early, - .init_time = r8a7790_timer_init, + .init_time = rcar_gen2_timer_init, .init_machine = lager_add_standard_devices, .dt_compat = lager_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 7661e898f376..a64f965c7da1 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -310,7 +310,7 @@ static struct clk_lookup lookups[] = { void __init r8a7790_clock_init(void) { - u32 mode = r8a7790_read_mode_pins(); + u32 mode = rcar_gen2_read_mode_pins(); int k, ret = 0; switch (mode & (MD(14) | MD(13))) { diff --git a/arch/arm/mach-shmobile/include/mach/r8a7790.h b/arch/arm/mach-shmobile/include/mach/r8a7790.h index 79e731c83e50..5fbfa28b40b6 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7790.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7790.h @@ -1,15 +1,13 @@ #ifndef __ASM_R8A7790_H__ #define __ASM_R8A7790_H__ +#include <mach/rcar-gen2.h> + void r8a7790_add_standard_devices(void); void r8a7790_add_dt_devices(void); void r8a7790_clock_init(void); void r8a7790_pinmux_init(void); void r8a7790_init_early(void); -void r8a7790_timer_init(void); extern struct smp_operations r8a7790_smp_ops; -#define MD(nr) BIT(nr) -u32 r8a7790_read_mode_pins(void); - #endif /* __ASM_R8A7790_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/rcar-gen2.h b/arch/arm/mach-shmobile/include/mach/rcar-gen2.h new file mode 100644 index 000000000000..43f606eb2d82 --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/rcar-gen2.h @@ -0,0 +1,8 @@ +#ifndef __ASM_RCAR_GEN2_H__ +#define __ASM_RCAR_GEN2_H__ + +void rcar_gen2_timer_init(void); +#define MD(nr) BIT(nr) +u32 rcar_gen2_read_mode_pins(void); + +#endif /* __ASM_RCAR_GEN2_H__ */ diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index c7e24eff9ba2..c47bcebbcb00 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -18,7 +18,6 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/clocksource.h> #include <linux/irq.h> #include <linux/kernel.h> #include <linux/of_platform.h> @@ -203,71 +202,6 @@ void __init r8a7790_add_standard_devices(void) r8a7790_register_thermal(); } -#define MODEMR 0xe6160060 - -u32 __init r8a7790_read_mode_pins(void) -{ - void __iomem *modemr = ioremap_nocache(MODEMR, 4); - u32 mode; - - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - - return mode; -} - -#define CNTCR 0 -#define CNTFID0 0x20 - -void __init r8a7790_timer_init(void) -{ -#ifdef CONFIG_ARM_ARCH_TIMER - u32 mode = r8a7790_read_mode_pins(); - void __iomem *base; - int extal_mhz = 0; - u32 freq; - - /* At Linux boot time the r8a7790 arch timer comes up - * with the counter disabled. Moreover, it may also report - * a potentially incorrect fixed 13 MHz frequency. To be - * correct these registers need to be updated to use the - * frequency EXTAL / 2 which can be determined by the MD pins. - */ - - switch (mode & (MD(14) | MD(13))) { - case 0: - extal_mhz = 15; - break; - case MD(13): - extal_mhz = 20; - break; - case MD(14): - extal_mhz = 26; - break; - case MD(13) | MD(14): - extal_mhz = 30; - break; - } - - /* The arch timer frequency equals EXTAL / 2 */ - freq = extal_mhz * (1000000 / 2); - - /* Remap "armgcnt address map" space */ - base = ioremap(0xe6080000, PAGE_SIZE); - - /* Update registers with correct frequency */ - iowrite32(freq, base + CNTFID0); - asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); - - /* make sure arch timer is started by setting bit 0 of CNTCR */ - iowrite32(1, base + CNTCR); - iounmap(base); -#endif /* CONFIG_ARM_ARCH_TIMER */ - - clocksource_of_init(); -} - void __init r8a7790_init_early(void) { #ifndef CONFIG_ARM_ARCH_TIMER @@ -285,7 +219,7 @@ static const char * const r8a7790_boards_compat_dt[] __initconst = { DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") .smp = smp_ops(r8a7790_smp_ops), .init_early = r8a7790_init_early, - .init_time = r8a7790_timer_init, + .init_time = rcar_gen2_timer_init, .dt_compat = r8a7790_boards_compat_dt, MACHINE_END #endif /* CONFIG_USE_OF */ diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c new file mode 100644 index 000000000000..5734c24bf6c7 --- /dev/null +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -0,0 +1,91 @@ +/* + * R-Car Generation 2 support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/clocksource.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <mach/common.h> +#include <mach/rcar-gen2.h> +#include <asm/mach/arch.h> + +#define MODEMR 0xe6160060 + +u32 __init rcar_gen2_read_mode_pins(void) +{ + void __iomem *modemr = ioremap_nocache(MODEMR, 4); + u32 mode; + + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + + return mode; +} + +#define CNTCR 0 +#define CNTFID0 0x20 + +void __init rcar_gen2_timer_init(void) +{ +#ifdef CONFIG_ARM_ARCH_TIMER + u32 mode = rcar_gen2_read_mode_pins(); + void __iomem *base; + int extal_mhz = 0; + u32 freq; + + /* At Linux boot time the r8a7790 arch timer comes up + * with the counter disabled. Moreover, it may also report + * a potentially incorrect fixed 13 MHz frequency. To be + * correct these registers need to be updated to use the + * frequency EXTAL / 2 which can be determined by the MD pins. + */ + + switch (mode & (MD(14) | MD(13))) { + case 0: + extal_mhz = 15; + break; + case MD(13): + extal_mhz = 20; + break; + case MD(14): + extal_mhz = 26; + break; + case MD(13) | MD(14): + extal_mhz = 30; + break; + } + + /* The arch timer frequency equals EXTAL / 2 */ + freq = extal_mhz * (1000000 / 2); + + /* Remap "armgcnt address map" space */ + base = ioremap(0xe6080000, PAGE_SIZE); + + /* Update registers with correct frequency */ + iowrite32(freq, base + CNTFID0); + asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq)); + + /* make sure arch timer is started by setting bit 0 of CNTCR */ + iowrite32(1, base + CNTCR); + iounmap(base); +#endif /* CONFIG_ARM_ARCH_TIMER */ + + clocksource_of_init(); +} |