diff options
Diffstat (limited to 'arch/arm/mach-spear13xx/spear1340.c')
| -rw-r--r-- | arch/arm/mach-spear13xx/spear1340.c | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c new file mode 100644 index 000000000000..ee38cbc56869 --- /dev/null +++ b/arch/arm/mach-spear13xx/spear1340.c @@ -0,0 +1,192 @@ +/* + * arch/arm/mach-spear13xx/spear1340.c + * + * SPEAr1340 machine source file + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) "SPEAr1340: " fmt + +#include <linux/ahci_platform.h> +#include <linux/amba/serial.h> +#include <linux/delay.h> +#include <linux/dw_dmac.h> +#include <linux/of_platform.h> +#include <asm/hardware/gic.h> +#include <asm/mach/arch.h> +#include <mach/dma.h> +#include <mach/generic.h> +#include <mach/spear.h> + +/* Base addresses */ +#define SPEAR1340_SATA_BASE UL(0xB1000000) +#define SPEAR1340_UART1_BASE UL(0xB4100000) + +/* Power Management Registers */ +#define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100) +#define SPEAR1340_PCM_WKUP_CFG (VA_MISC_BASE + 0x104) +#define SPEAR1340_SWITCH_CTR (VA_MISC_BASE + 0x108) + +#define SPEAR1340_PERIP1_SW_RST (VA_MISC_BASE + 0x318) +#define SPEAR1340_PERIP2_SW_RST (VA_MISC_BASE + 0x31C) +#define SPEAR1340_PERIP3_SW_RST (VA_MISC_BASE + 0x320) + +/* PCIE - SATA configuration registers */ +#define SPEAR1340_PCIE_SATA_CFG (VA_MISC_BASE + 0x424) + /* PCIE CFG MASks */ + #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT (1 << 11) + #define SPEAR1340_PCIE_CFG_POWERUP_RESET (1 << 10) + #define SPEAR1340_PCIE_CFG_CORE_CLK_EN (1 << 9) + #define SPEAR1340_PCIE_CFG_AUX_CLK_EN (1 << 8) + #define SPEAR1340_SATA_CFG_TX_CLK_EN (1 << 4) + #define SPEAR1340_SATA_CFG_RX_CLK_EN (1 << 3) + #define SPEAR1340_SATA_CFG_POWERUP_RESET (1 << 2) + #define SPEAR1340_SATA_CFG_PM_CLK_EN (1 << 1) + #define SPEAR1340_PCIE_SATA_SEL_PCIE (0) + #define SPEAR1340_PCIE_SATA_SEL_SATA (1) + #define SPEAR1340_SATA_PCIE_CFG_MASK 0xF1F + #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \ + SPEAR1340_PCIE_CFG_AUX_CLK_EN | \ + SPEAR1340_PCIE_CFG_CORE_CLK_EN | \ + SPEAR1340_PCIE_CFG_POWERUP_RESET | \ + SPEAR1340_PCIE_CFG_DEVICE_PRESENT) + #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \ + SPEAR1340_SATA_CFG_PM_CLK_EN | \ + SPEAR1340_SATA_CFG_POWERUP_RESET | \ + SPEAR1340_SATA_CFG_RX_CLK_EN | \ + SPEAR1340_SATA_CFG_TX_CLK_EN) + +#define SPEAR1340_PCIE_MIPHY_CFG (VA_MISC_BASE + 0x428) + #define SPEAR1340_MIPHY_OSC_BYPASS_EXT (1 << 31) + #define SPEAR1340_MIPHY_CLK_REF_DIV2 (1 << 27) + #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27) + #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27) + #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0) + #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \ + (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ + SPEAR1340_MIPHY_CLK_REF_DIV2 | \ + SPEAR1340_MIPHY_PLL_RATIO_TOP(60)) + #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \ + (SPEAR1340_MIPHY_PLL_RATIO_TOP(120)) + #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \ + (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ + SPEAR1340_MIPHY_PLL_RATIO_TOP(25)) + +static struct dw_dma_slave uart1_dma_param[] = { + { + /* Tx */ + .cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX), + .cfg_lo = 0, + .src_master = DMA_MASTER_MEMORY, + .dst_master = SPEAR1340_DMA_MASTER_UART1, + }, { + /* Rx */ + .cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX), + .cfg_lo = 0, + .src_master = SPEAR1340_DMA_MASTER_UART1, + .dst_master = DMA_MASTER_MEMORY, + } +}; + +static struct amba_pl011_data uart1_data = { + .dma_filter = dw_dma_filter, + .dma_tx_param = &uart1_dma_param[0], + .dma_rx_param = &uart1_dma_param[1], +}; + +/* SATA device registration */ +static int sata_miphy_init(struct device *dev, void __iomem *addr) +{ + writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG); + writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK, + SPEAR1340_PCIE_MIPHY_CFG); + /* Switch on sata power domain */ + writel((readl(SPEAR1340_PCM_CFG) | (0x800)), SPEAR1340_PCM_CFG); + msleep(20); + /* Disable PCIE SATA Controller reset */ + writel((readl(SPEAR1340_PERIP1_SW_RST) & (~0x1000)), + SPEAR1340_PERIP1_SW_RST); + msleep(20); + + return 0; +} + +void sata_miphy_exit(struct device *dev) +{ + writel(0, SPEAR1340_PCIE_SATA_CFG); + writel(0, SPEAR1340_PCIE_MIPHY_CFG); + + /* Enable PCIE SATA Controller reset */ + writel((readl(SPEAR1340_PERIP1_SW_RST) | (0x1000)), + SPEAR1340_PERIP1_SW_RST); + msleep(20); + /* Switch off sata power domain */ + writel((readl(SPEAR1340_PCM_CFG) & (~0x800)), SPEAR1340_PCM_CFG); + msleep(20); +} + +int sata_suspend(struct device *dev) +{ + if (dev->power.power_state.event == PM_EVENT_FREEZE) + return 0; + + sata_miphy_exit(dev); + + return 0; +} + +int sata_resume(struct device *dev) +{ + if (dev->power.power_state.event == PM_EVENT_THAW) + return 0; + + return sata_miphy_init(dev, NULL); +} + +static struct ahci_platform_data sata_pdata = { + .init = sata_miphy_init, + .exit = sata_miphy_exit, + .suspend = sata_suspend, + .resume = sata_resume, +}; + +/* Add SPEAr1340 auxdata to pass platform data */ +static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv), + OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data), + OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data), + OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data), + + OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL, + &sata_pdata), + OF_DEV_AUXDATA("arm,pl011", SPEAR1340_UART1_BASE, NULL, &uart1_data), + {} +}; + +static void __init spear1340_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + spear1340_auxdata_lookup, NULL); +} + +static const char * const spear1340_dt_board_compat[] = { + "st,spear1340", + "st,spear1340-evb", + NULL, +}; + +DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree") + .map_io = spear13xx_map_io, + .init_irq = spear13xx_dt_init_irq, + .handle_irq = gic_handle_irq, + .timer = &spear13xx_timer, + .init_machine = spear1340_dt_init, + .restart = spear_restart, + .dt_compat = spear1340_dt_board_compat, +MACHINE_END |