diff options
Diffstat (limited to 'arch/arm/mach-ux500/board-mop500-regulators.c')
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500-regulators.c | 40 |
1 files changed, 37 insertions, 3 deletions
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 2a17bc506cff..4b3c51905071 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -126,6 +126,7 @@ struct ab8500_regulator_reg_init ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { /* * VanaRequestCtrl = HP/LP depending on VxRequest + * VpllRequestCtrl = HP/LP depending on VxRequest * VextSupply1RequestCtrl = HP/LP depending on VxRequest */ INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00), @@ -142,12 +143,16 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { */ INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00), /* + * Vsmps1SysClkReq1HPValid = enabled + * Vsmps2SysClkReq1HPValid = enabled + * Vsmps3SysClkReq1HPValid = enabled * VanaSysClkReq1HPValid = disabled + * VpllSysClkReq1HPValid = enabled * Vaux1SysClkReq1HPValid = disabled * Vaux2SysClkReq1HPValid = disabled * Vaux3SysClkReq1HPValid = disabled */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x00), + INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x17), /* * VextSupply1SysClkReq1HPValid = disabled * VextSupply2SysClkReq1HPValid = disabled @@ -234,6 +239,34 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { */ INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00), /* + * VBBN = force OFF + * VBBP = force OFF + * NOTE! PRCMU register + */ + INIT_REGULATOR_REGISTER(AB8500_ARMREGU2, 0x00), + /* + * VBBNSel1 = VBBP = VBBPFB + * VBBPSel1 = 0 V + * NOTE! PRCMU register + */ + INIT_REGULATOR_REGISTER(AB8500_VBBSEL1, 0x00), + /* + * VBBNSel2 = VBBP = VBBPFB + * VBBPSel2 = 0 V + * NOTE! PRCMU register + */ + INIT_REGULATOR_REGISTER(AB8500_VBBSEL2, 0x00), + /* + * Vsmps1Regu = HW control + * Vsmps1SelCtrl = Vsmps1 voltage defined by Vsmsp1Sel2 + */ + INIT_REGULATOR_REGISTER(AB8500_VSMPS1REGU, 0x06), + /* + * Vsmps2Regu = HW control + * Vsmps2SelCtrl = Vsmps2 voltage defined by Vsmsp2Sel2 + */ + INIT_REGULATOR_REGISTER(AB8500_VSMPS2REGU, 0x06), + /* * VPll = Hw controlled * VanaRegu = force off */ @@ -257,9 +290,10 @@ ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = { */ INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01), /* - * Vaux3regu = force off + * Vrf1Regu = HW control + * Vaux3Regu = force off */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00), + INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x08), /* * Vsmps1 = 1.15V */ |