diff options
Diffstat (limited to 'arch/arm/mach-ux500/board-mop500.c')
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500.c | 85 |
1 files changed, 65 insertions, 20 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index cd54abaccd96..bdd7b80dd7ad 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -37,6 +37,7 @@ #include <plat/i2c.h> #include <plat/ste_dma40.h> #include <plat/pincfg.h> +#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -603,28 +604,72 @@ static void __init mop500_init_machine(void) { int i2c0_devs; + mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + + u8500_init_devices(); + + mop500_pins_init(); + + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); + + mop500_i2c_init(); + mop500_sdi_init(); + mop500_spi_init(); + mop500_uart_init(); + + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); + i2c_register_board_info(2, mop500_i2c2_devices, + ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); +} + +static void __init snowball_init_machine(void) +{ + int i2c0_devs; + + u8500_init_devices(); + + snowball_pins_init(); + + platform_add_devices(snowball_platform_devs, + ARRAY_SIZE(snowball_platform_devs)); + + mop500_i2c_init(); + snowball_sdi_init(); + mop500_spi_init(); + mop500_uart_init(); + + i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); + i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); + i2c_register_board_info(2, mop500_i2c2_devices, + ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); +} + +static void __init hrefv60_init_machine(void) +{ + int i2c0_devs; + /* * The HREFv60 board removed a GPIO expander and routed * all these GPIO pins to the internal GPIO controller * instead. */ - if (!machine_is_snowball()) { - if (machine_is_hrefv60()) - mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - else - mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; - } + mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; u8500_init_devices(); - mop500_pins_init(); + hrefv60_pins_init(); - if (machine_is_snowball()) - platform_add_devices(snowball_platform_devs, - ARRAY_SIZE(snowball_platform_devs)); - else - platform_add_devices(mop500_platform_devs, - ARRAY_SIZE(mop500_platform_devs)); + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); mop500_i2c_init(); mop500_sdi_init(); @@ -632,8 +677,8 @@ static void __init mop500_init_machine(void) mop500_uart_init(); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); - if (machine_is_hrefv60()) - i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; + + i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -645,7 +690,7 @@ static void __init mop500_init_machine(void) MACHINE_START(U8500, "ST-Ericsson MOP500 platform") /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */ - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = u8500_map_io, .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ @@ -654,18 +699,18 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform") MACHINE_END MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = u8500_map_io, .init_irq = ux500_init_irq, .timer = &ux500_timer, - .init_machine = mop500_init_machine, + .init_machine = hrefv60_init_machine, MACHINE_END MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") - .boot_params = 0x100, + .atag_offset = 0x100, .map_io = u8500_map_io, .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ .timer = &ux500_timer, - .init_machine = mop500_init_machine, + .init_machine = snowball_init_machine, MACHINE_END |