diff options
Diffstat (limited to 'arch/arm/mach-ux500')
| -rw-r--r-- | arch/arm/mach-ux500/Kconfig | 6 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500-uib.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500.c | 52 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/cache-l2x0.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/cpu-db8500.c | 15 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/cpu.c | 17 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/cpuidle.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/devices-db8500.c | 44 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/devices-db8500.h | 5 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/id.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/id.h (renamed from arch/arm/mach-ux500/include/mach/id.h) | 21 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/hardware.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/irqs-board-mop500.h | 10 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/setup.h | 3 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/include/mach/uncompress.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/platsmp.c | 9 | ||||
| -rw-r--r-- | arch/arm/mach-ux500/timer.c | 15 |
17 files changed, 121 insertions, 89 deletions
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 5dea90636d94..3e5bbd0e5b23 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -11,6 +11,7 @@ config UX500_SOC_COMMON select COMMON_CLK select PINCTRL select PINCTRL_NOMADIK + select PINCTRL_ABX500 select PL310_ERRATA_753970 if CACHE_PL310 config UX500_SOC_DB8500 @@ -18,6 +19,11 @@ config UX500_SOC_DB8500 select CPU_FREQ_TABLE if CPU_FREQ select MFD_DB8500_PRCMU select PINCTRL_DB8500 + select PINCTRL_DB8540 + select PINCTRL_AB8500 + select PINCTRL_AB8505 + select PINCTRL_AB9540 + select PINCTRL_AB8540 select REGULATOR select REGULATOR_DB8500_PRCMU diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c index 1f47d962e3a1..7037d3687e9f 100644 --- a/arch/arm/mach-ux500/board-mop500-uib.c +++ b/arch/arm/mach-ux500/board-mop500-uib.c @@ -13,6 +13,7 @@ #include <mach/hardware.h> #include "board-mop500.h" +#include "id.h" enum mop500_uib { STUIB, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index d453522edb0d..b03457881c4b 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -28,7 +28,7 @@ #include <linux/mfd/tps6105x.h> #include <linux/mfd/abx500/ab8500-gpio.h> #include <linux/mfd/abx500/ab8500-codec.h> -#include <linux/leds-lp5521.h> +#include <linux/platform_data/leds-lp55xx.h> #include <linux/input.h> #include <linux/smsc911x.h> #include <linux/gpio_keys.h> @@ -40,7 +40,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -90,26 +89,8 @@ static struct platform_device snowball_gpio_en_3v3_regulator_dev = { }, }; -static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { +static struct abx500_gpio_platform_data ab8500_gpio_pdata = { .gpio_base = MOP500_AB8500_PIN_GPIO(1), - .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, - /* config_reg is the initial configuration of ab8500 pins. - * The pins can be configured as GPIO or alt functions based - * on value present in GpioSel1 to GpioSel6 and AlternatFunction - * register. This is the array of 7 configuration settings. - * One has to compile time decide these settings. Below is the - * explanation of these setting - * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO - * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO - * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO - * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO - * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO - * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO - * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured - * as GPIO then this register selectes the alternate fucntions - */ - .config_reg = {0x00, 0x1E, 0x80, 0x01, - 0x7A, 0x00, 0x00}, }; /* ab8500-codec */ @@ -215,7 +196,7 @@ static struct platform_device snowball_sbnet_dev = { }, }; -static struct ab8500_platform_data ab8500_platdata = { +struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, .regulator_reg_init = ab8500_regulator_reg_init, .num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init), @@ -320,7 +301,7 @@ static struct tc3589x_platform_data mop500_tc35892_data = { .irq_base = MOP500_EGPIO_IRQ_BASE, }; -static struct lp5521_led_config lp5521_pri_led[] = { +static struct lp55xx_led_config lp5521_pri_led[] = { [0] = { .chan_nr = 0, .led_current = 0x2f, @@ -338,14 +319,14 @@ static struct lp5521_led_config lp5521_pri_led[] = { }, }; -static struct lp5521_platform_data __initdata lp5521_pri_data = { +static struct lp55xx_platform_data __initdata lp5521_pri_data = { .label = "lp5521_pri", .led_config = &lp5521_pri_led[0], .num_channels = 3, - .clock_mode = LP5521_CLOCK_EXT, + .clock_mode = LP55XX_CLOCK_EXT, }; -static struct lp5521_led_config lp5521_sec_led[] = { +static struct lp55xx_led_config lp5521_sec_led[] = { [0] = { .chan_nr = 0, .led_current = 0x2f, @@ -363,11 +344,11 @@ static struct lp5521_led_config lp5521_sec_led[] = { }, }; -static struct lp5521_platform_data __initdata lp5521_sec_data = { +static struct lp55xx_platform_data __initdata lp5521_sec_data = { .label = "lp5521_sec", .led_config = &lp5521_sec_led[0], .num_channels = 3, - .clock_mode = LP5521_CLOCK_EXT, + .clock_mode = LP55XX_CLOCK_EXT, }; static struct i2c_board_info __initdata mop500_i2c0_devices[] = { @@ -651,6 +632,7 @@ static void __init mop500_init_machine(void) int i2c0_devs; int i; + platform_device_register(&db8500_prcmu_device); mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; mop500_pinmaps_init(); @@ -685,6 +667,7 @@ static void __init snowball_init_machine(void) struct device *parent = NULL; int i; + platform_device_register(&db8500_prcmu_device); snowball_pinmaps_init(); parent = u8500_init_devices(&ab8500_platdata); @@ -710,6 +693,7 @@ static void __init hrefv60_init_machine(void) int i2c0_devs; int i; + platform_device_register(&db8500_prcmu_device); /* * The HREFv60 board removed a GPIO expander and routed * all these GPIO pins to the internal GPIO controller @@ -751,8 +735,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform") .map_io = u8500_map_io, .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, + .init_time = ux500_timer_init, .init_machine = mop500_init_machine, .init_late = ux500_init_late, MACHINE_END @@ -761,8 +744,7 @@ MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520") .atag_offset = 0x100, .map_io = u8500_map_io, .init_irq = ux500_init_irq, - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, + .init_time = ux500_timer_init, .init_machine = mop500_init_machine, .init_late = ux500_init_late, MACHINE_END @@ -772,8 +754,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") .smp = smp_ops(ux500_smp_ops), .map_io = u8500_map_io, .init_irq = ux500_init_irq, - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, + .init_time = ux500_timer_init, .init_machine = hrefv60_init_machine, .init_late = ux500_init_late, MACHINE_END @@ -784,8 +765,7 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") .map_io = u8500_map_io, .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, + .init_time = ux500_timer_init, .init_machine = snowball_init_machine, .init_late = NULL, MACHINE_END diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 75d5b512a3d5..1c1609da76ce 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -10,7 +10,8 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> #include <mach/hardware.h> -#include <mach/id.h> + +#include "id.h" static void __iomem *l2x0_base; diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 5b286e06474c..19235cf7bbe3 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -27,7 +27,6 @@ #include <asm/pmu.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> -#include <asm/hardware/gic.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -37,7 +36,9 @@ #include "devices-db8500.h" #include "ste-dma40-db8500.h" + #include "board-mop500.h" +#include "id.h" /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_uart_io_desc[] __initdata = { @@ -137,14 +138,9 @@ static struct platform_device db8500_pmu_device = { .dev.platform_data = &db8500_pmu_platdata, }; -static struct platform_device db8500_prcmu_device = { - .name = "db8500-prcmu", -}; - static struct platform_device *platform_devs[] __initdata = { &u8500_dma40_device, &db8500_pmu_device, - &db8500_prcmu_device, }; static resource_size_t __initdata db8500_gpio_base[] = { @@ -284,8 +280,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL), OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL), OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), + OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", + &db8500_prcmu_pdata), /* Requires device name bindings. */ - OF_DEV_AUXDATA("stericsson,nmk_pinctrl", U8500_PRCMU_BASE, + OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), /* Requires clock name and DMA bindings. */ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, @@ -341,8 +339,7 @@ DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)") .map_io = u8500_map_io, .init_irq = ux500_init_irq, /* we re-use nomadik timer here */ - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, + .init_time = ux500_timer_init, .init_machine = u8500_init_machine, .init_late = NULL, .dt_compat = stericsson_dt_platform_compat, diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index a48026651504..002da9a369d5 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -17,9 +17,10 @@ #include <linux/of.h> #include <linux/of_irq.h> #include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/irqchip/arm-gic.h> #include <linux/platform_data/clk-ux500.h> -#include <asm/hardware/gic.h> #include <asm/mach/map.h> #include <mach/hardware.h> @@ -27,6 +28,7 @@ #include <mach/devices.h> #include "board-mop500.h" +#include "id.h" void __iomem *_PRCMU_BASE; @@ -42,11 +44,6 @@ void __iomem *_PRCMU_BASE; * This feels fragile because it depends on the gpio device getting probed * _before_ any device uses the gpio interrupts. */ -static const struct of_device_id ux500_dt_irq_match[] = { - { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - {}, -}; - void __init ux500_init_irq(void) { void __iomem *dist_base; @@ -62,7 +59,7 @@ void __init ux500_init_irq(void) #ifdef CONFIG_OF if (of_have_populated_dt()) - of_irq_init(ux500_dt_irq_match); + irqchip_init(); else #endif gic_init(0, 29, dist_base, cpu_base); @@ -71,13 +68,11 @@ void __init ux500_init_irq(void) * Init clocks here so that they are available for system timer * initialization. */ - if (cpu_is_u8500_family()) + if (cpu_is_u8500_family() || cpu_is_u9540()) db8500_prcmu_early_init(); - if (cpu_is_u8500_family()) + if (cpu_is_u8500_family() || cpu_is_u9540()) u8500_clk_init(); - else if (cpu_is_u9540()) - u9540_clk_init(); else if (cpu_is_u8540()) u8540_clk_init(); } diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c index b54884bd2549..ce9149302cc3 100644 --- a/arch/arm/mach-ux500/cpuidle.c +++ b/arch/arm/mach-ux500/cpuidle.c @@ -40,8 +40,10 @@ static inline int ux500_enter_idle(struct cpuidle_device *dev, goto wfi; /* decouple the gic from the A9 cores */ - if (prcmu_gic_decouple()) + if (prcmu_gic_decouple()) { + spin_unlock(&master_lock); goto out; + } /* If an error occur, we will have to recouple the gic * manually */ diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 318d49020894..f3d9419f75d3 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -13,11 +13,13 @@ #include <linux/amba/bus.h> #include <linux/amba/pl022.h> #include <linux/platform_data/dma-ste-dma40.h> +#include <linux/mfd/dbx500-prcmu.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/irqs.h> +#include "devices-db8500.h" #include "ste-dma40-db8500.h" static struct resource dma40_resources[] = { @@ -194,3 +196,45 @@ struct platform_device u8500_ske_keypad_device = { .num_resources = ARRAY_SIZE(keypad_resources), .resource = keypad_resources, }; + +struct prcmu_pdata db8500_prcmu_pdata = { + .ab_platdata = &ab8500_platdata, + .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, + .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, +}; + +static struct resource db8500_prcmu_res[] = { + { + .name = "prcmu", + .start = U8500_PRCMU_BASE, + .end = U8500_PRCMU_BASE + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "prcmu-tcdm", + .start = U8500_PRCMU_TCDM_BASE, + .end = U8500_PRCMU_TCDM_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "irq", + .start = IRQ_DB8500_PRCMU1, + .end = IRQ_DB8500_PRCMU1, + .flags = IORESOURCE_IRQ, + }, + { + .name = "prcmu-tcpm", + .start = U8500_PRCMU_TCPM_BASE, + .end = U8500_PRCMU_TCPM_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device db8500_prcmu_device = { + .name = "db8500-prcmu", + .resource = db8500_prcmu_res, + .num_resources = ARRAY_SIZE(db8500_prcmu_res), + .dev = { + .platform_data = &db8500_prcmu_pdata, + }, +}; diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index a5e05f6e256f..dbcb35c48f06 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -14,6 +14,11 @@ struct ske_keypad_platform_data; struct pl022_ssp_controller; +struct platform_device; + +extern struct ab8500_platform_data ab8500_platdata; +extern struct prcmu_pdata db8500_prcmu_pdata; +extern struct platform_device db8500_prcmu_device; static inline struct platform_device * db8500_add_ske_keypad(struct device *parent, diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c index d1579920139f..9f951842e1e5 100644 --- a/arch/arm/mach-ux500/id.c +++ b/arch/arm/mach-ux500/id.c @@ -17,6 +17,8 @@ #include <mach/hardware.h> #include <mach/setup.h> +#include "id.h" + struct dbx500_asic_id dbx500_id; static unsigned int ux500_read_asicid(phys_addr_t addr) diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/id.h index 9c42642ab168..bcc58a8cccbc 100644 --- a/arch/arm/mach-ux500/include/mach/id.h +++ b/arch/arm/mach-ux500/id.h @@ -61,9 +61,14 @@ static inline bool __attribute_const__ cpu_is_u8540(void) return dbx500_partnumber() == 0x8540; } +static inline bool __attribute_const__ cpu_is_u8580(void) +{ + return dbx500_partnumber() == 0x8580; +} + static inline bool cpu_is_ux540_family(void) { - return cpu_is_u9540() || cpu_is_u8540(); + return cpu_is_u9540() || cpu_is_u8540() || cpu_is_u8580(); } /* @@ -115,6 +120,20 @@ static inline bool cpu_is_u8500v20_or_later(void) return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11()); } +/* + * 8540 revisions + */ + +static inline bool __attribute_const__ cpu_is_u8540v10(void) +{ + return cpu_is_u8540() && dbx500_revision() == 0xA0; +} + +static inline bool __attribute_const__ cpu_is_u8580v10(void) +{ + return cpu_is_u8580() && dbx500_revision() == 0xA0; +} + static inline bool ux500_is_svp(void) { return false; diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 28d16e744bfd..5201ddace503 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -39,7 +39,6 @@ #ifndef __ASSEMBLY__ -#include <mach/id.h> extern void __iomem *_PRCMU_BASE; #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index 7d34c52798b5..d526dd8e87d3 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -38,15 +38,7 @@ #define MOP500_STMPE1601_IRQ_END \ MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS) -/* AB8500 virtual gpio IRQ */ -#define AB8500_VIR_GPIO_NR_IRQS 16 - -#define MOP500_AB8500_VIR_GPIO_IRQ_BASE \ - MOP500_STMPE1601_IRQ_END -#define MOP500_AB8500_VIR_GPIO_IRQ_END \ - (MOP500_AB8500_VIR_GPIO_IRQ_BASE + AB8500_VIR_GPIO_NR_IRQS) - -#define MOP500_NR_IRQS MOP500_AB8500_VIR_GPIO_IRQ_END +#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ_END #define MOP500_IRQ_END MOP500_NR_IRQS diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 6be4c4d2ab88..bddce2b49372 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -28,8 +28,7 @@ extern struct device *ux500_soc_device_init(const char *soc_id); struct amba_device; extern void __init amba_add_devices(struct amba_device *devs[], int num); -struct sys_timer; -extern struct sys_timer ux500_timer; +extern void ux500_timer_init(void); #define __IO_DEV_DESC(x, sz) { \ .virtual = IO_ADDRESS(x), \ diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index d60ecd1753f0..36969d52e53a 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -54,6 +54,4 @@ static inline void arch_decomp_setup(void) ux500_uart_base = (void __iomem *)U8500_UART2_BASE; } -#define arch_decomp_wdog() /* nothing to do here */ - #endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 3db7782f3afb..18f7af339dc9 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -16,14 +16,17 @@ #include <linux/device.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/irqchip/arm-gic.h> #include <asm/cacheflush.h> -#include <asm/hardware/gic.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> + #include <mach/hardware.h> #include <mach/setup.h> +#include "id.h" + /* This is called from headsmp.S to wakeup the secondary core */ extern void u8500_secondary_startup(void); @@ -91,7 +94,7 @@ static int __cpuinit ux500_boot_secondary(unsigned int cpu, struct task_struct * */ write_pen_release(cpu_logical_map(cpu)); - smp_send_reschedule(cpu); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { @@ -155,8 +158,6 @@ static void __init ux500_smp_init_cpus(void) for (i = 0; i < ncores; i++) set_cpu_possible(i, true); - - set_smp_cross_call(gic_raise_softirq); } static void __init ux500_smp_prepare_cpus(unsigned int max_cpus) diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index 875309acb022..a6af0b8732ba 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -17,6 +17,8 @@ #include <mach/hardware.h> #include <mach/irqs.h> +#include "id.h" + #ifdef CONFIG_HAVE_ARM_TWD static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer, U8500_TWD_BASE, IRQ_LOCALTIMER); @@ -46,7 +48,7 @@ const static struct of_device_id prcmu_timer_of_match[] __initconst = { { }, }; -static void __init ux500_timer_init(void) +void __init ux500_timer_init(void) { void __iomem *mtu_timer_base; void __iomem *prcmu_timer_base; @@ -99,14 +101,3 @@ dt_fail: clksrc_dbx500_prcmu_init(prcmu_timer_base); ux500_twd_init(); } - -static void ux500_timer_reset(void) -{ - nmdk_clkevt_reset(); - nmdk_clksrc_reset(); -} - -struct sys_timer ux500_timer = { - .init = ux500_timer_init, - .resume = ux500_timer_reset, -}; |