diff options
Diffstat (limited to 'arch/arm/plat-mxc/include/mach')
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/arc_otg.h | 7 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/common.h | 1 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/fsl_usb.h | 11 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/hardware.h | 3 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/iomux-v3.h | 50 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/memory.h | 4 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/mmc.h | 3 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/mx37.h | 3 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/mx5x.h | 91 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/mxc.h | 68 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/mxc_dvfs.h | 54 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/system.h | 3 |
12 files changed, 242 insertions, 56 deletions
diff --git a/arch/arm/plat-mxc/include/mach/arc_otg.h b/arch/arm/plat-mxc/include/mach/arc_otg.h index 1b2511079560..2a58492ccc70 100644 --- a/arch/arm/plat-mxc/include/mach/arc_otg.h +++ b/arch/arm/plat-mxc/include/mach/arc_otg.h @@ -147,6 +147,7 @@ #define USBCTRL_HOST3 USBOTHER_REG(0x18) /* USB Cotrol Register 1*/ #define USBH1_PHY_CTRL0 USBOTHER_REG(0x1c) /* USB Cotrol Register 1*/ #define USBH1_PHY_CTRL1 USBOTHER_REG(0x20) /* USB Cotrol Register 1*/ +#define USB_CLKONOFF_CTRL USBOTHER_REG(0x24) /* USB Clock on/off Control Register */ /* * register bits @@ -245,6 +246,7 @@ #define UCTRL_OBPVAL_RXDP (1 << 26) /* OTG RxDp status in bypass mode */ #define UCTRL_OBPVAL_RXDM (1 << 25) /* OTG RxDm status in bypass mode */ #define UCTRL_OPM (1 << 24) /* OTG power mask */ +#define UCTRL_O_PWR_POL (1 << 24) /* OTG power pin polarity */ #define UCTRL_H2WIR (1 << 23) /* HOST2 wakeup intr request received */ #define UCTRL_H2SIC_MASK (3 << 21) /* HOST2 Serial Interface Config: */ #define UCTRL_H2SIC_DU6 (0 << 21) /* Differential/unidirectional 6 wire */ @@ -329,6 +331,7 @@ #define USB_UTMI_PHYCTRL_OC_POL (1 << 9) /* OTG Polarity of Overcurrent */ #define USB_UTMI_PHYCTRL_OC_DIS (1 << 8) /* OTG Disable Overcurrent Event */ #define USB_UH1_OC_DIS (1 << 5) /* UH1 Disable Overcurrent Event */ +#define USB_UH1_OC_POL (1 << 6) /* UH1 Polarity of OC,Low active */ /* USB_PHY_CTRL_FUNC2*/ #define USB_UTMI_PHYCTRL2_PLLDIV_MASK 0x3 #define USB_UTMI_PHYCTRL2_PLLDIV_SHIFT 0 @@ -355,6 +358,8 @@ #define ULPIVW_WDATA_SHIFT 0 #define HCSPARAMS_PPC (0x1<<4) /* Port Power Control */ - +/* USB Clock on/off Control Register */ +#define OTG_AHBCLK_OFF (0x1<<17) /* 1: OFF */ +#define H1_AHBCLK_OFF (0x1<<18) /* 1: OFF */ extern enum fsl_usb2_modes get_usb_mode(struct fsl_usb2_platform_data *pdata); #endif diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 742fb43592b7..990c3a00567c 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -34,6 +34,7 @@ extern int mx27_clocks_init(unsigned long fref); extern int mx31_clocks_init(unsigned long fref); extern int mx35_clocks_init(void); extern int mx37_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); +extern int mx50_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih); extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mxc_init_devices(void); diff --git a/arch/arm/plat-mxc/include/mach/fsl_usb.h b/arch/arm/plat-mxc/include/mach/fsl_usb.h index d1235fc337ff..71263360dc69 100644 --- a/arch/arm/plat-mxc/include/mach/fsl_usb.h +++ b/arch/arm/plat-mxc/include/mach/fsl_usb.h @@ -1,5 +1,5 @@ /* - * Copyright 2005-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2005-2010 Freescale Semiconductor, Inc. All Rights Reserved. */ /* @@ -88,4 +88,13 @@ static inline void fsl_platform_set_ahb_burst(struct usb_hcd *hcd) writel((temp & (~(0x3f << 16))) | (0x20 << 16), hcd->regs + FSL_SOC_USB_TXFILLTUNING); } + + /* Increase TX fifo threshold for USB+SD in Hostx */ + if (cpu_is_mx53() && (strcmp("DR", pdata->name))) { + temp = readl(hcd->regs + FSL_SOC_USB_TXFILLTUNING); + /* Change TX FIFO threshold to be 0x08 */ + writel((temp & (~(0x3f << 16))) | (0x08 << 16), + hcd->regs + FSL_SOC_USB_TXFILLTUNING); + } + } diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index e47a97bdfbd8..f48456869730 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -41,6 +41,7 @@ #define BOARD_REV_1 0x000 #define BOARD_REV_2 0x100 +#define BOARD_REV_3 0x200 #ifdef CONFIG_ARCH_MX3 #include <mach/mx3x.h> @@ -85,6 +86,8 @@ extern unsigned int system_rev; #ifdef CONFIG_ARCH_MX5 #define board_is_mx53_arm2() (cpu_is_mx53() && board_is_rev(BOARD_REV_2)) +#define board_is_mx53_evk_a() (cpu_is_mx53() && board_is_rev(BOARD_REV_1)) +#define board_is_mx53_evk_b() (cpu_is_mx53() && board_is_rev(BOARD_REV_3)) #endif #include <mach/mxc.h> diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h index 7cd84547658f..6beaf8cd69b5 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -68,33 +68,31 @@ struct pad_desc { /* * Use to set PAD control */ -#define PAD_CTL_DRIVE_VOLTAGE_3_3_V 0 -#define PAD_CTL_DRIVE_VOLTAGE_1_8_V 1 -#define PAD_CTL_NO_HYSTERESIS 0 -#define PAD_CTL_HYSTERESIS 1 +#define PAD_CTL_DVS (1 << 13) +#define PAD_CTL_HYS (1 << 8) -#define PAD_CTL_PULL_DISABLED 0x0 -#define PAD_CTL_PULL_KEEPER 0xa -#define PAD_CTL_PULL_DOWN_100K 0xc -#define PAD_CTL_PULL_UP_47K 0xd -#define PAD_CTL_PULL_UP_100K 0xe -#define PAD_CTL_PULL_UP_22K 0xf +#define PAD_CTL_PKE (1 << 7) +#define PAD_CTL_PUE (1 << 6) +#define PAD_CTL_PUS_100K_DOWN (0 << 4) +#define PAD_CTL_PUS_360K_DOWN (0 << 4) +#define PAD_CTL_PUS_47K_UP (1 << 4) +#define PAD_CTL_PUS_75K_UP (1 << 4) +#define PAD_CTL_PUS_100K_UP (2 << 4) +#define PAD_CTL_PUS_22K_UP (3 << 4) -#define PAD_CTL_OUTPUT_CMOS 0 -#define PAD_CTL_OUTPUT_OPEN_DRAIN 1 +#define PAD_CTL_ODE (1 << 3) -#define PAD_CTL_DRIVE_STRENGTH_NORM 0 -#define PAD_CTL_DRIVE_STRENGTH_HIGH 1 -#define PAD_CTL_DRIVE_STRENGTH_MAX 2 +#define PAD_CTL_DSE_LOW (0 << 1) +#define PAD_CTL_DSE_MED (1 << 1) +#define PAD_CTL_DSE_HIGH (2 << 1) +#define PAD_CTL_DSE_MAX (3 << 1) -#define PAD_CTL_SLEW_RATE_SLOW 0 -#define PAD_CTL_SLEW_RATE_FAST 1 +#define PAD_CTL_SRE_FAST (1 << 0) +#define PAD_CTL_SRE_SLOW (0 << 0) /* - * setups a single pad: - * - reserves the pad so that it is not claimed by another driver - * - setups the iomux according to the configuration + * setups a single pad in the iomuxer */ int mxc_iomux_v3_setup_pad(struct pad_desc *pad); @@ -105,17 +103,9 @@ int mxc_iomux_v3_setup_pad(struct pad_desc *pad); int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count); /* - * releases a single pad: - * - make it available for a future use by another driver - * - DOES NOT reconfigure the IOMUX in its reset state + * Initialise the iomux controller */ -void mxc_iomux_v3_release_pad(struct pad_desc *pad); - -/* - * releases multiple pads - * convenvient way to call the above function with tables - */ -void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count); +void mxc_iomux_v3_init(void __iomem *iomux_v3_base); #endif /* __MACH_IOMUX_V3_H__*/ diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index 3861342d1be0..ff05850287af 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -32,6 +32,10 @@ #define PHYS_OFFSET UL(0x90000000) #endif +#ifdef CONFIG_ARCH_MX50 +#define PHYS_OFFSET UL(0x70000000) +#endif + #ifdef CONFIG_ARCH_MX53 #define PHYS_OFFSET UL(0x70000000) #endif diff --git a/arch/arm/plat-mxc/include/mach/mmc.h b/arch/arm/plat-mxc/include/mach/mmc.h index d563c157bad7..7be75bd5756e 100644 --- a/arch/arm/plat-mxc/include/mach/mmc.h +++ b/arch/arm/plat-mxc/include/mach/mmc.h @@ -40,6 +40,9 @@ struct mxc_mmc_platform_data { unsigned int min_clk; unsigned int max_clk; unsigned int clk_flg; /* 1 clock enable, 0 not */ + unsigned int clk_always_on; /* Needed by SDIO cards and etc */ + unsigned int dll_override_en; /* Enable dll override delay line */ + unsigned int dll_delay_cells; /* The number of delay cells (0-0x3f) */ unsigned int reserved:16; unsigned int card_fixed:1; unsigned int card_inserted_state:1; diff --git a/arch/arm/plat-mxc/include/mach/mx37.h b/arch/arm/plat-mxc/include/mach/mx37.h index 3013d197f206..d83bdfd8824b 100644 --- a/arch/arm/plat-mxc/include/mach/mx37.h +++ b/arch/arm/plat-mxc/include/mach/mx37.h @@ -225,6 +225,9 @@ #define WEIM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DA000) #define NFC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DB000) +#define DPTCLP_BASE_ADDR (GPC_BASE_ADDR + 0x80) +#define DPTCGP_BASE_ADDR (GPC_BASE_ADDR + 0x100) +#define DVFSCORE_BASE_ADDR (GPC_BASE_ADDR + 0x180) #define DVFSPER_BASE_ADDR (GPC_BASE_ADDR + 0x1C4) /* diff --git a/arch/arm/plat-mxc/include/mach/mx5x.h b/arch/arm/plat-mxc/include/mach/mx5x.h index 5be0f426c7da..0e25133736d2 100644 --- a/arch/arm/plat-mxc/include/mach/mx5x.h +++ b/arch/arm/plat-mxc/include/mach/mx5x.h @@ -93,7 +93,7 @@ #endif #ifdef CONFIG_MXC_VPU_IRAM -#define VPU_IRAM_SIZE 0x11000 +#define VPU_IRAM_SIZE 0x14000 #else #define VPU_IRAM_SIZE 0 #endif @@ -129,6 +129,36 @@ #define MX51_TZIC_BASE_ADDR 0xE0000000 #define TZIC_SIZE SZ_16K +/* + * AHCI SATA + */ +#define MX53_SATA_BASE_ADDR 0x10000000 + +/* + * Databahn MX50 + */ +#define MX50_DATABAHN_BASE_ADDR 0x14000000 +#define DATABAHN_CTL_REG19 0x4c +#define DATABAHN_CTL_REG20 0x50 +#define DATABAHN_CTL_REG21 0x54 +#define DATABAHN_CTL_REG22 0x58 +#define DATABAHN_CTL_REG23 0x5c +#define DATABAHN_CTL_REG42 0xa8 +#define DATABAHN_CTL_REG43 0xac +#define DATABAHN_CTL_REG55 0xdc +#define DATABAHN_CTL_REG63 0xFC +#define LOWPOWER_CONTROL_MASK 0x1F +#define LOWPOWER_AUTOENABLE_MASK 0x1F +#define LOWPOWER_EXTERNAL_CNT_MASK (0xFFFF << 16) +#define LOWPOWER_EXTERNAL_CNT_OFFSET 16 +#define LOWPOWER_INTERNAL_CNT_MASK (0xFFFF << 8) +#define LOWPOWER_INTERNAL_CNT_OFFSET 8 +#define LOWPOWER_REFRESH_ENABLE_MASK (3 << 16) +#define LOWPOWER_REFRESH_ENABLE_OFFSET 16 +#define LOWPOWER_REFRESH_HOLD_MASK 0xFFFF +#define LOWPOWER_REFRESH_HOLD_OFFSET 0 + + #define DEBUG_BASE_ADDR 0x40000000 /*MX53 + 0x2000000 */ #define DEBUG_SIZE SZ_1M @@ -141,6 +171,22 @@ #define CTI3_BASE_ADDR (DEBUG_BASE_ADDR + 0x00007000) #define CORTEX_DBG_BASE_ADDR (DEBUG_BASE_ADDR + 0x00008000) +#define APBHDMA_BASE_ADDR (DEBUG_BASE_ADDR + 0x01000000) +#define OCOTP_CTRL_BASE_ADDR (DEBUG_BASE_ADDR + 0x01002000) +#define DIGCTL_BASE_ADDR (DEBUG_BASE_ADDR + 0x01004000) +#define GPMI_BASE_ADDR (DEBUG_BASE_ADDR + 0x01006000) +#define BCH_BASE_ADDR (DEBUG_BASE_ADDR + 0x01008000) +#define ELCDIF_BASE_ADDR (DEBUG_BASE_ADDR + 0x0100A000) +#define EPXP_BASE_ADDR (DEBUG_BASE_ADDR + 0x0100C000) +#define DCP_BASE_ADDR (DEBUG_BASE_ADDR + 0x0100E000) +#define EPDC_BASE_ADDR (DEBUG_BASE_ADDR + 0x01010000) +#define QOSC_BASE_ADDR (DEBUG_BASE_ADDR + 0x01012000) +#define PERFMON_BASE_ADDR (DEBUG_BASE_ADDR + 0x01014000) +#define SSP_BASE_ADDR (DEBUG_BASE_ADDR + 0x01016000) +#define ANATOP_BASE_ADDR (DEBUG_BASE_ADDR + 0x01018000) + +#define MX50_NIC_BASE_ADDR (DEBUG_BASE_ADDR + 0x08000000) + /* * SPBA global module enabled #0 */ @@ -216,6 +262,7 @@ #define MX53_ATA_BASE_ADDR (AIPS1_BASE_ADDR + 0x000E8000) #define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x000EC000) #define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000F0000) +#define RNGB_BASE_ADDR (AIPS1_BASE_ADDR + 0x000F8000) /* MX50 */ #define DVFSCORE_BASE_ADDR (GPC_BASE_ADDR + 0x180) #define DVFSPER_BASE_ADDR (GPC_BASE_ADDR + 0x1C4) @@ -371,7 +418,7 @@ #define NFC_AXI_IO_ADDRESS(x) \ (((x) - NFC_BASE_ADDR_AXI) + NFC_BASE_ADDR_AXI_VIRT) -#define MX53_BASE_ADDR(x) (cpu_is_mx53() ? (x) - 0x20000000 : (x)) +#define MX53_BASE_ADDR(x) (cpu_is_mx53() || cpu_is_mx50() ? (x) - 0x20000000 : (x)) #define IS_MEM_DEVICE_NONSHARED(x) 0 @@ -388,6 +435,8 @@ #define DMA_REQ_SLIM_B_TX 42 /* MX51 */ #define DMA_REQ_UART3_TX_MX51 44 #define DMA_REQ_UART3_RX_MX51 43 +#define DMA_REQ_UART3_TX_MX50 43 +#define DMA_REQ_UART3_RX_MX50 42 #define DMA_REQ_ESAI_TX 41 #define DMA_REQ_SDHC4_MX51 41 #define DMA_REQ_ESAI_RX 40 @@ -434,9 +483,13 @@ #define DMA_REQ_UART5_RX 16 #define DMA_REQ_SPDIF_TX 15 #define DMA_REQ_SPDIF_RX 14 +#define DMA_REQ_EXTREQ0_MX50 14 +#define DMA_REQ_EXTREQ1_MX50 15 /* UART2 is shared w/FIRI on MX53 */ #define DMA_REQ_FIRI_TX 13 #define DMA_REQ_FIRI_RX 12 +#define DMA_REQ_UART2_TX_MX50 13 +#define DMA_REQ_UART2_RX_MX50 12 #define DMA_REQ_SDHC4_MX53 11 #define DMA_REQ_HS_I2C_RX 11 /* MX51 */ @@ -453,7 +506,9 @@ #define DMA_REQ_SLIM_B 5 /* MX51 */ #define DMA_REQ_ATA_TX_END 4 #define DMA_REQ_ATA_TX 3 +#define DMA_REQ_UART4_TX_MX50 3 #define DMA_REQ_ATA_RX 2 +#define DMA_REQ_UART4_RX_MX50 2 #define DMA_REQ_GPC 1 #define DMA_REQ_VPU 0 @@ -481,16 +536,21 @@ #define MXC_INT_USB_H3 17 #define MXC_INT_USB_OTG 18 #define MXC_INT_SAHARA_H0 19 +#define MXC_INT_DATABAHN 19 /* MX50 */ #define MXC_INT_SAHARA_H1 20 +#define MXC_INT_ELCDIF 20 /* MX50 */ #define MXC_INT_SCC_SMN 21 +#define MXC_INT_EPXP 21 /* MX50 */ #define MXC_INT_SCC_STZ 22 #define MXC_INT_SCC_SCM 23 #define MXC_INT_SRTC_NTZ 24 #define MXC_INT_SRTC_TZ 25 #define MXC_INT_RTIC 26 #define MXC_INT_CSU 27 +#define MXC_INT_EPDC 27 /* MX50 */ #define MXC_INT_SATA 28 #define MXC_INT_SLIM_B 28 /* MX51 */ +#define MXC_INT_NIC 28 /* MX50 Perfmon IRQ */ #define MXC_INT_SSI1 29 #define MXC_INT_SSI2 30 #define MXC_INT_UART1 31 @@ -534,6 +594,10 @@ #define MXC_INT_SIM_IPB 67 #define MXC_INT_SIM_DAT 68 #define MXC_INT_IIM 69 +#define MXC_INT_ANATOP1 66 /* MX50 what's it? */ +#define MXC_INT_ANATOP2 67 +#define MXC_INT_ANATOP3 68 +#define MXC_INT_ANATOP4 69 #define MXC_INT_ATA 70 #define MXC_INT_CCM1 71 #define MXC_INT_CCM2 72 @@ -559,23 +623,46 @@ #define MXC_INT_CTI1_TG2 89 #define MXC_INT_SJC 90 #define MXC_INT_SPDIF_MX51 91 +#define MXC_INT_DCP_CHAN1_3 91 /* MX50 */ #define MXC_INT_TVE 92 +#define MXC_INT_DCP_CHAN0 92 /* MX50 */ #define MXC_INT_FIRI 93 +#define MXC_INT_DCP_CHAN0_3_SEC 93 /* MX50 */ #define MXC_INT_PWM2 94 #define MXC_INT_SLIM_EXP 95 #define MXC_INT_SSI3 96 #define MXC_INT_EMI_BOOT 97 +#define MXC_INT_RNGB_BLOCK 97 /* MX50 */ #define MXC_INT_CTI1_TG3 98 #define MXC_INT_SMC_RX 99 #define MXC_INT_VPU_IDLE 100 +#define MXC_INT_RAWNAND_BCH 100 /* MX50 */ #define MXC_INT_EMI_NFC 101 #define MXC_INT_GPU_IDLE 102 +#define MXC_INT_RAWNAND_GPMI 102 /* MX50 */ #define MXC_INT_GPIO5_LOW 103 #define MXC_INT_GPIO5_HIGH 104 #define MXC_INT_GPIO6_LOW 105 #define MXC_INT_GPIO6_HIGH 106 #define MXC_INT_GPIO7_LOW 107 #define MXC_INT_GPIO7_HIGH 108 +#define MXC_INT_MSHC 109 /* MX50 */ +#define MXC_INT_APBHDMA_CHAN0 110 +#define MXC_INT_APBHDMA_CHAN1 111 +#define MXC_INT_APBHDMA_CHAN2 112 +#define MXC_INT_APBHDMA_CHAN3 113 +#define MXC_INT_APBHDMA_CHAN4 114 +#define MXC_INT_APBHDMA_CHAN5 115 +#define MXC_INT_APBHDMA_CHAN6 116 +#define MXC_INT_APBHDMA_CHAN7 117 +#define MXC_INT_APBHDMA_CHAN8 118 +#define MXC_INT_APBHDMA_CHAN9 119 +#define MXC_INT_APBHDMA_CHAN10 120 +#define MXC_INT_APBHDMA_CHAN11 121 +#define MXC_INT_APBHDMA_CHAN12 122 +#define MXC_INT_APBHDMA_CHAN13 123 +#define MXC_INT_APBHDMA_CHAN14 124 +#define MXC_INT_APBHDMA_CHAN15 125 /* gpio and gpio based interrupt handling */ #define GPIO_DR 0x00 diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index a47e599c54d4..808adf67552d 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -34,6 +34,7 @@ #define MXC_CPU_MX37 37 #define MXC_CPU_MX51 51 #define MXC_CPU_MX53 53 +#define MXC_CPU_MX50 50 #ifndef __ASSEMBLY__ extern unsigned int __mxc_cpu_type; @@ -147,6 +148,18 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx53() (0) #endif +#ifdef CONFIG_ARCH_MX50 +# ifdef mxc_cpu_type +# undef mxc_cpu_type +# define mxc_cpu_type __mxc_cpu_type +# else +# define mxc_cpu_type MXC_CPU_MX50 +# endif +# define cpu_is_mx50() (mxc_cpu_type == MXC_CPU_MX50) +#else +# define cpu_is_mx50() (0) +#endif + #define cpu_is_mx32() (0) /* @@ -222,6 +235,7 @@ struct mxc_ipu_config { int rev; void (*reset) (void); struct clk *di_clk[2]; + struct clk *csi_clk[2]; }; struct mxc_ir_platform_data { @@ -292,6 +306,7 @@ struct mxc_lightsensor_platform_data { struct mxc_fb_platform_data { struct fb_videomode *mode; + int num_modes; char *mode_str; u32 interface_pix_fmt; }; @@ -306,8 +321,32 @@ struct mxc_lcd_platform_data { struct ccwmx51_lcd_pdata { int vif; struct mxc_fb_platform_data fb_pdata; - void (*reset) (void); - void (*bl_enable) (int); + void (*init) (int); + void (*deinit) (int); + void (*bl_enable) (int, int); +}; + +struct mxc_epdc_fb_mode { + struct fb_videomode *vmode; + int vscan_holdoff; + int sdoed_width; + int sdoed_delay; + int sdoez_width; + int sdoez_delay; + int gdclk_hp_offs; + int gdsp_offs; + int gdoe_offs; + int gdclk_offs; + int num_ce; +}; + +struct mxc_epdc_fb_platform_data { + struct mxc_epdc_fb_mode *epdc_mode; + int num_modes; + void (*get_pins) (void); + void (*put_pins) (void); + void (*enable_pins) (void); + void (*disable_pins) (void); }; struct mxc_tsc_platform_data { @@ -346,6 +385,7 @@ struct mxc_camera_platform_data { char *gpo_regulator; u32 mclk; u32 csi; + void (*pwdn) (int pwdn); }; /*gpo1-3 is in fixed state by hardware design, @@ -465,10 +505,20 @@ struct tve_platform_data { char *dig_reg; }; +struct ldb_platform_data { + char *lvds_bg_reg; + u32 ext_ref; +}; + struct mxc_vpu_platform_data { void (*reset) (void); }; +struct mxc_esai_platform_data { + void (*activate_esai_ports) (void); + void (*deactivate_esai_ports) (void); +}; + /* The name that links the i.MX NAND Flash Controller driver to its devices. */ #define IMX_NFC_DRIVER_NAME ("imx_nfc") @@ -584,6 +634,18 @@ struct mxc_sim_platform_data { unsigned int detect; /* 1 have detect pin, 0 not */ }; +struct fsl_otp_data { + char **fuse_name; + char *regulator_name; + unsigned int fuse_num; +}; + +struct mxs_dma_plat_data { + unsigned int burst8:1; + unsigned int burst:1; + unsigned int chan_base; + unsigned int chan_num; +}; #endif /* __ASSEMBLY__ */ #define MUX_IO_P 29 @@ -649,7 +711,7 @@ void gpio_deactivate_esai_ports(void); #define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8) #endif -#define cpu_is_mx5() (cpu_is_mx51() || cpu_is_mx53()) +#define cpu_is_mx5() (cpu_is_mx51() || cpu_is_mx53() || cpu_is_mx50()) #define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35()) #define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27()) diff --git a/arch/arm/plat-mxc/include/mach/mxc_dvfs.h b/arch/arm/plat-mxc/include/mach/mxc_dvfs.h index fd0179b4d8f9..05c6ea4bda77 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_dvfs.h +++ b/arch/arm/plat-mxc/include/mach/mxc_dvfs.h @@ -35,6 +35,7 @@ #include <linux/device.h> extern void __iomem *gpc_base; +extern void __iomem *ccm_base; #define MXC_GPCCNTR_GPCIRQ2M (1 << 25) #define MXC_GPCCNTR_GPCIRQ2 (1 << 24) @@ -101,6 +102,25 @@ extern void __iomem *gpc_base; #define MXC_DVFSPMCR1_P4PM 0x00020000 #define MXC_DVFSPMCR1_P2PM 0x00010000 +/* DVFS CORE register offsets*/ +#define MXC_DVFSCORE_THRS 0x00 +#define MXC_DVFSCORE_COUN 0x04 +#define MXC_DVFSCORE_SIG1 0x08 +#define MXC_DVFSCORE_SIG0 0x0C +#define MXC_DVFSCORE_GPC0 0x10 +#define MXC_DVFSCORE_GPC1 0x14 +#define MXC_DVFSCORE_GPBT 0x18 +#define MXC_DVFSCORE_EMAC 0x1C +#define MXC_DVFSCORE_CNTR 0x20 +#define MXC_DVFSCORE_LTR0_0 0x24 +#define MXC_DVFSCORE_LTR0_1 0x28 +#define MXC_DVFSCORE_LTR1_0 0x2C +#define MXC_DVFSCORE_LTR1_1 0x30 +#define MXC_DVFSCORE_PT0 0x34 +#define MXC_DVFSCORE_PT1 0x38 +#define MXC_DVFSCORE_PT2 0x3C +#define MXC_DVFSCORE_PT3 0x40 + /* * DVFS structure */ @@ -120,24 +140,20 @@ struct mxc_dvfs_platform_data { char *clk1_id; /* DVFS clock name string */ char *clk2_id; - /* GPC control reg address */ - void __iomem *gpc_cntr_reg_addr; - /* GPC voltage counter reg address */ - void __iomem *gpc_vcr_reg_addr; - /* CCM DVFS control reg address */ - void __iomem *ccm_cdcr_reg_addr; - /* CCM ARM clock root reg address */ - void __iomem *ccm_cacrr_reg_addr; - /* CCM divider handshake in-progree reg address */ - void __iomem *ccm_cdhipr_reg_addr; - /* DVFS threshold reg address */ - void __iomem *dvfs_thrs_reg_addr; - /* DVFS counters reg address */ - void __iomem *dvfs_coun_reg_addr; - /* DVFS EMAC reg address */ - void __iomem *dvfs_emac_reg_addr; - /* DVFS control reg address */ - void __iomem *dvfs_cntr_reg_addr; + /* The base address of the DVFS core */ + void __iomem *membase; + /* The interrupt number used by the DVFS core */ + int irq; + /* GPC control reg offset */ + int gpc_cntr_offset; + /* GPC voltage counter reg offset */ + int gpc_vcr_offset; + /* CCM DVFS control reg offset */ + int ccm_cdcr_offset; + /* CCM ARM clock root reg offset */ + int ccm_cacrr_offset; + /* CCM divider handshake in-progress reg offset */ + int ccm_cdhipr_offset; /* PREDIV mask */ u32 prediv_mask; /* PREDIV offset */ @@ -182,6 +198,8 @@ struct mxc_dvfsper_data { char *reg_id; /* DVFS clock name string */ char *clk_id; + /* The base address of the DVFS per */ + void __iomem *membase; /* GPC control reg address */ void __iomem *gpc_cntr_reg_addr; /* GPC VCR reg address */ diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index 126bc8713159..604abbc77da0 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -1,7 +1,7 @@ /* * Copyright (C) 1999 ARM Limited * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2004-2010 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -24,5 +24,6 @@ extern void arch_idle(void); void arch_reset(char mode, const char *cmd); +int mxs_reset_block(void __iomem *hwreg, int just_enable); #endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ |