summaryrefslogtreecommitdiff
path: root/arch/arm/plat-mxc/include
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-mxc/include')
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx27ads.h7
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx31ads.h2
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx31pdk.h19
-rw-r--r--arch/arm/plat-mxc/include/mach/debug-macro.S3
-rw-r--r--arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h10
-rw-r--r--arch/arm/plat-mxc/include/mach/dma.h14
-rw-r--r--arch/arm/plat-mxc/include/mach/entry-macro.S2
-rw-r--r--arch/arm/plat-mxc/include/mach/gpio.h4
-rw-r--r--arch/arm/plat-mxc/include/mach/hardware.h4
-rw-r--r--arch/arm/plat-mxc/include/mach/io.h8
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h72
-rw-r--r--arch/arm/plat-mxc/include/mach/iomux-mx3.h19
-rw-r--r--arch/arm/plat-mxc/include/mach/irqs.h32
-rw-r--r--arch/arm/plat-mxc/include/mach/memory.h21
-rw-r--r--arch/arm/plat-mxc/include/mach/mtd-xip.h34
-rw-r--r--arch/arm/plat-mxc/include/mach/mx1.h186
-rw-r--r--arch/arm/plat-mxc/include/mach/mx27.h15
-rw-r--r--arch/arm/plat-mxc/include/mach/mx31.h25
-rw-r--r--arch/arm/plat-mxc/include/mach/mxc_timer.h4
-rw-r--r--arch/arm/plat-mxc/include/mach/timex.h8
20 files changed, 375 insertions, 114 deletions
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index 61e66dac90ef..8f34a05afc87 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -15,7 +15,7 @@
#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__
/* external interrupt multiplexer */
-#define MXC_EXP_IO_BASE (MXC_GPIO_BASE + MXC_MAX_GPIO_LINES)
+#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
#define MXC_VIRTUAL_INTS_BASE (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES)
#define MXC_SDIO1_CARD_IRQ MXC_VIRTUAL_INTS_BASE
@@ -28,11 +28,6 @@
/*
* MXC UART EVB board level configurations
*/
-
-#define MXC_LL_EXTUART_PADDR (CS4_BASE_ADDR + 0x20000)
-#define MXC_LL_EXTUART_VADDR (CS4_BASE_ADDR_VIRT + 0x20000)
-#define MXC_LL_EXTUART_16BIT_BUS
-
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 745b48864f93..451d510d08c3 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -90,7 +90,7 @@
#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
-#define MXC_EXP_IO_BASE (MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES)
+#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 0)
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
new file mode 100644
index 000000000000..2b6b316d0f51
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index b9907bebba3b..602768b427e2 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -28,6 +28,9 @@
#ifdef CONFIG_MACH_PCM038
#include <mach/board-pcm038.h>
#endif
+#ifdef CONFIG_MACH_MX31_3DS
+#include <mach/board-mx31pdk.h>
+#endif
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
index e85fd946116c..b3876cc238ca 100644
--- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+++ b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
@@ -22,13 +22,15 @@
* MA 02110-1301, USA.
*/
-#include <asm/dma.h>
-
#ifndef __ASM_ARCH_MXC_DMA_H
#define __ASM_ARCH_MXC_DMA_H
#define IMX_DMA_CHANNELS 16
+#define DMA_MODE_READ 0
+#define DMA_MODE_WRITE 1
+#define DMA_MODE_MASK 1
+
#define DMA_BASE IO_ADDRESS(DMA_BASE_ADDR)
#define IMX_DMA_MEMSIZE_32 (0 << 4)
@@ -54,12 +56,12 @@ imx_dma_config_burstlen(int channel, unsigned int burstlen);
int
imx_dma_setup_single(int channel, dma_addr_t dma_address,
unsigned int dma_length, unsigned int dev_addr,
- dmamode_t dmamode);
+ unsigned int dmamode);
int
imx_dma_setup_sg(int channel, struct scatterlist *sg,
unsigned int sgcount, unsigned int dma_length,
- unsigned int dev_addr, dmamode_t dmamode);
+ unsigned int dev_addr, unsigned int dmamode);
int
imx_dma_setup_handlers(int channel,
diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h
deleted file mode 100644
index c822d569a05e..000000000000
--- a/arch/arm/plat-mxc/include/mach/dma.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_DMA_H__
-#define __ASM_ARCH_MXC_DMA_H__
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 11632028f7d1..5f01d60da845 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -9,6 +9,8 @@
* published by the Free Software Foundation.
*/
+#include <mach/hardware.h>
+
#define AVIC_NIMASK 0x04
@ this macro disables fast irq (not implemented)
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index 65eedc0d196f..ea509f1090fb 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -27,8 +27,8 @@
#define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq(gpio) (MXC_MAX_INT_LINES + (gpio))
-#define irq_to_gpio(irq) ((irq) - MXC_MAX_INT_LINES)
+#define gpio_to_irq(gpio) (MXC_GPIO_IRQ_START + (gpio))
+#define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START)
struct mxc_gpio_port {
void __iomem *base;
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 3caadeeda701..a612d8bb73c8 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -32,6 +32,10 @@
# endif
#endif
+#ifdef CONFIG_ARCH_MX1
+# include <mach/mx1.h>
+#endif
+
#include <mach/mxc.h>
#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/io.h b/arch/arm/plat-mxc/include/mach/io.h
index 5d4cb1196441..b4f2de769466 100644
--- a/arch/arm/plat-mxc/include/mach/io.h
+++ b/arch/arm/plat-mxc/include/mach/io.h
@@ -25,8 +25,8 @@ __mx3_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
/* Access all peripherals below 0x80000000 as nonshared device
* but leave l2cc alone.
*/
- if ((phys_addr < 0x80000000) && ((phys_addr < L2CC_BASE_ADDR) ||
- (phys_addr >= L2CC_BASE_ADDR + L2CC_SIZE)))
+ if ((phys_addr < 0x80000000) && ((phys_addr < 0x30000000) ||
+ (phys_addr >= 0x30000000 + SZ_1M)))
mtype = MT_DEVICE_NONSHARED;
}
@@ -35,8 +35,8 @@ __mx3_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
#endif
/* io address mapping macro */
-#define __io(a) ((void __iomem *)(a))
+#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
+#define __mem_pci(a) (a)
#endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
index 3d09bfd6c53d..95a383be628e 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
@@ -21,12 +21,6 @@
#include <linux/io.h>
-#define MXC_GPIO_ALLOC_MODE_NORMAL 0
-#define MXC_GPIO_ALLOC_MODE_NO_ALLOC 1
-#define MXC_GPIO_ALLOC_MODE_TRY_ALLOC 2
-#define MXC_GPIO_ALLOC_MODE_ALLOC_ONLY 4
-#define MXC_GPIO_ALLOC_MODE_RELEASE 8
-
/*
* GPIO Module and I/O Multiplexer
* x = 0..3 for reg_A, reg_B, reg_C, reg_D
@@ -103,7 +97,8 @@
extern void mxc_gpio_mode(int gpio_mode);
extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- int alloc_mode, const char *label);
+ const char *label);
+extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
/*-------------------------------------------------------------------------*/
@@ -113,9 +108,9 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
* missing on some (many) pins
*/
#ifdef CONFIG_ARCH_MX1
-#define PA0_AIN_SPI2_CLK (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0)
+#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_OUT | 0)
#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD (GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1)
+#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_IN | 1)
#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1)
#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2)
#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3)
@@ -133,7 +128,7 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17)
+#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_OUT | 17)
#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18)
#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19)
#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20)
@@ -201,27 +196,27 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15)
#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16)
#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24)
-#define PC25_BIN_UART3_DSR (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25)
-#define PC26_AOUT_UART3_DTR (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27)
-#define PC28_BIN_UART3_CTS (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28)
-#define PC29_AOUT_UART3_RTS (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX (GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
+#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24)
+#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25)
+#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_IN | 26)
+#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27)
+#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28)
+#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_IN | 29)
+#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30)
+#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_IN | 31)
#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6)
#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR (GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7)
-#define PD7_AIN_SPI2_SCLK (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7)
+#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_IN | GPIO_AF | 7)
+#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7)
#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8)
#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8)
-#define PD8_AIN_SPI2_SS (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8)
+#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8)
#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9)
#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9)
-#define PD9_AOUT_SPI2_RXD (GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9)
+#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_IN | 9)
#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10)
#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10)
-#define PD10_AIN_SPI2_TXD (GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10)
+#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_OUT | 10)
#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11)
#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12)
#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13)
@@ -243,7 +238,7 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
#define PD29_PF_LD14 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
#define PD30_PF_LD15 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30)
#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD (GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31)
+#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31)
#endif
#ifdef CONFIG_ARCH_MX2
@@ -279,6 +274,12 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 29)
#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_OUT | GPIO_PF | 30)
#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_OUT | GPIO_PF | 31)
+#define PB4_PF_SD2_D0 (GPIO_PORTB | GPIO_PF | 4)
+#define PB5_PF_SD2_D1 (GPIO_PORTB | GPIO_PF | 5)
+#define PB6_PF_SD2_D2 (GPIO_PORTB | GPIO_PF | 6)
+#define PB7_PF_SD2_D3 (GPIO_PORTB | GPIO_PF | 7)
+#define PB8_PF_SD2_CMD (GPIO_PORTB | GPIO_PF | 8)
+#define PB9_PF_SD2_CLK (GPIO_PORTB | GPIO_PF | 9)
#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 10)
#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 10)
#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 11)
@@ -315,6 +316,13 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 31)
#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_IN | GPIO_PF | 5)
#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_IN | GPIO_PF | 6)
+#define PC7_PF_USBOTG_DATA5 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 7)
+#define PC8_PF_USBOTG_DATA6 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 8)
+#define PC9_PF_USBOTG_DATA0 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
+#define PC10_PF_USBOTG_DATA2 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 10)
+#define PC11_PF_USBOTG_DATA1 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
+#define PC12_PF_USBOTG_DATA4 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 12)
+#define PC13_PF_USBOTG_DATA3 (GPIO_PORTC | GPIO_OUT | GPIO_PF | 13)
#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 16)
#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 17)
#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 18)
@@ -365,6 +373,9 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_IN | GPIO_PF | 30)
#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_OUT | GPIO_PF | 31)
#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23)
+#define PE0_PF_USBOTG_NXT (GPIO_PORTE | GPIO_OUT | GPIO_PF | 0)
+#define PE1_PF_USBOTG_STP (GPIO_PORTE | GPIO_OUT | GPIO_PF | 1)
+#define PE2_PF_USBOTG_DIR (GPIO_PORTE | GPIO_OUT | GPIO_PF | 2)
#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 3)
#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 4)
#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 6)
@@ -379,18 +390,27 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 15)
#define PE16_AF_RTCK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 16)
#define PE16_PF_RTCK (GPIO_PORTE | GPIO_OUT | GPIO_PF | 16)
+#define PE18_PF_SDHC1_D0 (GPIO_PORTE | GPIO_PF | 18)
#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_IN | GPIO_AF | 18)
+#define PE19_PF_SDHC1_D1 (GPIO_PORTE | GPIO_PF | 19)
+#define PE20_PF_SDHC1_D2 (GPIO_PORTE | GPIO_PF | 20)
+#define PE21_PF_SDHC1_D3 (GPIO_PORTE | GPIO_PF | 21)
#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_OUT | GPIO_AF | 21)
+#define PE22_PF_SDHC1_CMD (GPIO_PORTE | GPIO_PF | 22)
#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_OUT | GPIO_AF | 22)
+#define PE22_PF_SDHC1_CLK (GPIO_PORTE | GPIO_PF | 23)
#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 23)
+#define PE24_PF_USBOTG_CLK (GPIO_PORTE | GPIO_OUT | GPIO_PF | 24)
+#define PE25_PF_USBOTG_DATA7 (GPIO_PORTE | GPIO_OUT | GPIO_PF | 25)
#endif
/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - MXC_MAX_INT_LINES) >> 5)
+#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
-#define IRQ_GPIOA(x) (MXC_MAX_INT_LINES + x)
+#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x)
#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
+#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x)
#endif /* _MXC_GPIO_MX1_MX2_H */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index c9f39c2fb8c6..c9198c0aea18 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -141,7 +141,7 @@ void mxc_iomux_set_gpr(enum iomux_gp_func, bool);
((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT)
#define IOMUX_TO_IRQ(iomux_pin) \
(((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \
- MXC_GPIO_INT_BASE)
+ MXC_GPIO_IRQ_START)
/*
* This enumeration is constructed based on the Section
@@ -491,6 +491,14 @@ enum iomux_pins {
#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CTS2__CTS2 IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RTS2__RTS2 IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_TXD2__TXD2 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RXD2__RXD2 IOMUX_MODE(MX31_PIN_RXD2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_PC_RST__CTS5 IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_PC_VS2__RTS5 IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_PC_BVD2__TXD5 IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_PC_BVD1__RXD5 IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_CSPI1_MOSI__MOSI IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI1_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_FUNC)
@@ -509,6 +517,15 @@ enum iomux_pins {
#define MX31_PIN_CSPI3_MISO__MISO IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI3_SCLK__SCLK IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSPI3_SPI_RDY__SPI_RDY IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_BATT_LINE__OWIRE IOMUX_MODE(MX31_PIN_BATT_LINE, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CS4__CS4 IOMUX_MODE(MX31_PIN_CS4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_DATA3__SD1_DATA3 IOMUX_MODE(MX31_PIN_SD1_DATA3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_DATA2__SD1_DATA2 IOMUX_MODE(MX31_PIN_SD1_DATA2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_DATA1__SD1_DATA1 IOMUX_MODE(MX31_PIN_SD1_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
+
/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
* cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index b55bba35e18a..e06d3cb0ee11 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -11,7 +11,37 @@
#ifndef __ASM_ARCH_MXC_IRQS_H__
#define __ASM_ARCH_MXC_IRQS_H__
-#include <mach/hardware.h>
+/*
+ * So far all i.MX SoCs have 64 internal interrupts
+ */
+#define MXC_INTERNAL_IRQS 64
+
+#define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS
+
+#if defined CONFIG_ARCH_MX1
+#define MXC_GPIO_IRQS (32 * 4)
+#elif defined CONFIG_ARCH_MX2
+#define MXC_GPIO_IRQS (32 * 6)
+#elif defined CONFIG_ARCH_MX3
+#define MXC_GPIO_IRQS (32 * 3)
+#endif
+
+/*
+ * The next 16 interrupts are for board specific purposes. Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these. If you need more, increase MXC_BOARD_IRQS, but keep it
+ * within sensible limits.
+ */
+#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
+#define MXC_BOARD_IRQS 16
+
+#define NR_IRQS (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
+
extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
+/* all normal IRQs can be FIQs */
+#define FIQ_START 0
+/* switch betwean IRQ and FIQ */
+extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type);
+
#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index d7a8d3ebed57..0b808399097f 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -11,19 +11,12 @@
#ifndef __ASM_ARCH_MXC_MEMORY_H__
#define __ASM_ARCH_MXC_MEMORY_H__
-#include <mach/hardware.h>
-
-/*
- * Virtual view <-> DMA view memory address translations
- * This macro is used to translate the virtual address to an address
- * suitable to be passed to set_dma_addr()
- */
-#define __virt_to_bus(a) __virt_to_phys(a)
-
-/*
- * Used to convert an address for DMA operations to an address that the
- * kernel can use.
- */
-#define __bus_to_virt(a) __phys_to_virt(a)
+#if defined CONFIG_ARCH_MX1
+#define PHYS_OFFSET UL(0x08000000)
+#elif defined CONFIG_ARCH_MX2
+#define PHYS_OFFSET UL(0xA0000000)
+#elif defined CONFIG_ARCH_MX3
+#define PHYS_OFFSET UL(0x80000000)
+#endif
#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mtd-xip.h b/arch/arm/plat-mxc/include/mach/mtd-xip.h
new file mode 100644
index 000000000000..1ab1bba5688d
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mtd-xip.h
@@ -0,0 +1,34 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ *
+ * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>, Teltonika, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/mxc_timer.h>
+
+#ifndef __ARCH_IMX_MTD_XIP_H__
+#define __ARCH_IMX_MTD_XIP_H__
+
+#ifdef CONFIG_ARCH_MX1
+/* AITC registers */
+#define AITC_BASE IO_ADDRESS(AVIC_BASE_ADDR)
+#define NIPNDH (AITC_BASE + 0x58)
+#define NIPNDL (AITC_BASE + 0x5C)
+#define INTENABLEH (AITC_BASE + 0x10)
+#define INTENABLEL (AITC_BASE + 0x14)
+/* MTD macros */
+#define xip_irqpending() ((__raw_readl(INTENABLEH) & __raw_readl(NIPNDH)) \
+ || (__raw_readl(INTENABLEL) & __raw_readl(NIPNDL)))
+#define xip_currtime() (__raw_readl(TIMER_BASE + MXC_TCN))
+#define xip_elapsed_since(x) (signed)((__raw_readl(TIMER_BASE + MXC_TCN) - (x)) / 96)
+#define xip_cpu_idle() asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (0))
+#endif /* CONFIG_ARCH_MX1 */
+
+#endif /* __ARCH_IMX_MTD_XIP_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
new file mode 100644
index 000000000000..b92e02324d8e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -0,0 +1,186 @@
+/*
+ * Copyright (C) 1997,1998 Russell King
+ * Copyright (C) 1999 ARM Limited
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX1_H__
+#define __ASM_ARCH_MXC_MX1_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+#include <mach/vmalloc.h>
+
+/*
+ * Memory map
+ */
+#define IMX_IO_PHYS 0x00200000
+#define IMX_IO_SIZE 0x00100000
+#define IMX_IO_BASE VMALLOC_END
+
+#define IMX_CS0_PHYS 0x10000000
+#define IMX_CS0_SIZE 0x02000000
+
+#define IMX_CS1_PHYS 0x12000000
+#define IMX_CS1_SIZE 0x01000000
+
+#define IMX_CS2_PHYS 0x13000000
+#define IMX_CS2_SIZE 0x01000000
+
+#define IMX_CS3_PHYS 0x14000000
+#define IMX_CS3_SIZE 0x01000000
+
+#define IMX_CS4_PHYS 0x15000000
+#define IMX_CS4_SIZE 0x01000000
+
+#define IMX_CS5_PHYS 0x16000000
+#define IMX_CS5_SIZE 0x01000000
+
+/*
+ * Register BASEs, based on OFFSETs
+ */
+#define AIPI1_BASE_ADDR (0x00000 + IMX_IO_PHYS)
+#define WDT_BASE_ADDR (0x01000 + IMX_IO_PHYS)
+#define TIM1_BASE_ADDR (0x02000 + IMX_IO_PHYS)
+#define TIM2_BASE_ADDR (0x03000 + IMX_IO_PHYS)
+#define RTC_BASE_ADDR (0x04000 + IMX_IO_PHYS)
+#define LCDC_BASE_ADDR (0x05000 + IMX_IO_PHYS)
+#define UART1_BASE_ADDR (0x06000 + IMX_IO_PHYS)
+#define UART2_BASE_ADDR (0x07000 + IMX_IO_PHYS)
+#define PWM_BASE_ADDR (0x08000 + IMX_IO_PHYS)
+#define DMA_BASE_ADDR (0x09000 + IMX_IO_PHYS)
+#define AIPI2_BASE_ADDR (0x10000 + IMX_IO_PHYS)
+#define SIM_BASE_ADDR (0x11000 + IMX_IO_PHYS)
+#define USBD_BASE_ADDR (0x12000 + IMX_IO_PHYS)
+#define SPI1_BASE_ADDR (0x13000 + IMX_IO_PHYS)
+#define MMC_BASE_ADDR (0x14000 + IMX_IO_PHYS)
+#define ASP_BASE_ADDR (0x15000 + IMX_IO_PHYS)
+#define BTA_BASE_ADDR (0x16000 + IMX_IO_PHYS)
+#define I2C_BASE_ADDR (0x17000 + IMX_IO_PHYS)
+#define SSI_BASE_ADDR (0x18000 + IMX_IO_PHYS)
+#define SPI2_BASE_ADDR (0x19000 + IMX_IO_PHYS)
+#define MSHC_BASE_ADDR (0x1A000 + IMX_IO_PHYS)
+#define CCM_BASE_ADDR (0x1B000 + IMX_IO_PHYS)
+#define SCM_BASE_ADDR (0x1B804 + IMX_IO_PHYS)
+#define GPIO_BASE_ADDR (0x1C000 + IMX_IO_PHYS)
+#define EIM_BASE_ADDR (0x20000 + IMX_IO_PHYS)
+#define SDRAMC_BASE_ADDR (0x21000 + IMX_IO_PHYS)
+#define MMA_BASE_ADDR (0x22000 + IMX_IO_PHYS)
+#define AVIC_BASE_ADDR (0x23000 + IMX_IO_PHYS)
+#define CSI_BASE_ADDR (0x24000 + IMX_IO_PHYS)
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) ((x) - IMX_IO_PHYS + IMX_IO_BASE)
+
+/* define macros needed for entry-macro.S */
+#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x)
+
+/* fixed interrput numbers */
+#define INT_SOFTINT 0
+#define CSI_INT 6
+#define DSPA_MAC_INT 7
+#define DSPA_INT 8
+#define COMP_INT 9
+#define MSHC_XINT 10
+#define GPIO_INT_PORTA 11
+#define GPIO_INT_PORTB 12
+#define GPIO_INT_PORTC 13
+#define LCDC_INT 14
+#define SIM_INT 15
+#define SIM_DATA_INT 16
+#define RTC_INT 17
+#define RTC_SAMINT 18
+#define UART2_MINT_PFERR 19
+#define UART2_MINT_RTS 20
+#define UART2_MINT_DTR 21
+#define UART2_MINT_UARTC 22
+#define UART2_MINT_TX 23
+#define UART2_MINT_RX 24
+#define UART1_MINT_PFERR 25
+#define UART1_MINT_RTS 26
+#define UART1_MINT_DTR 27
+#define UART1_MINT_UARTC 28
+#define UART1_MINT_TX 29
+#define UART1_MINT_RX 30
+#define VOICE_DAC_INT 31
+#define VOICE_ADC_INT 32
+#define PEN_DATA_INT 33
+#define PWM_INT 34
+#define SDHC_INT 35
+#define I2C_INT 39
+#define CSPI_INT 41
+#define SSI_TX_INT 42
+#define SSI_TX_ERR_INT 43
+#define SSI_RX_INT 44
+#define SSI_RX_ERR_INT 45
+#define TOUCH_INT 46
+#define USBD_INT0 47
+#define USBD_INT1 48
+#define USBD_INT2 49
+#define USBD_INT3 50
+#define USBD_INT4 51
+#define USBD_INT5 52
+#define USBD_INT6 53
+#define BTSYS_INT 55
+#define BTTIM_INT 56
+#define BTWUI_INT 57
+#define TIM2_INT 58
+#define TIM1_INT 59
+#define DMA_ERR 60
+#define DMA_INT 61
+#define GPIO_INT_PORTD 62
+#define WDT_INT 63
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR 0x1C
+#define GPIO_GDIR 0x00
+#define GPIO_PSR 0x24
+#define GPIO_ICR1 0x28
+#define GPIO_ICR2 0x2C
+#define GPIO_IMR 0x30
+#define GPIO_ISR 0x34
+#define GPIO_INT_LOW_LEV 0x3
+#define GPIO_INT_HIGH_LEV 0x2
+#define GPIO_INT_RISE_EDGE 0x0
+#define GPIO_INT_FALL_EDGE 0x1
+#define GPIO_INT_NONE 0x4
+
+/* DMA */
+#define DMA_REQ_UART3_T 2
+#define DMA_REQ_UART3_R 3
+#define DMA_REQ_SSI2_T 4
+#define DMA_REQ_SSI2_R 5
+#define DMA_REQ_CSI_STAT 6
+#define DMA_REQ_CSI_R 7
+#define DMA_REQ_MSHC 8
+#define DMA_REQ_DSPA_DCT_DOUT 9
+#define DMA_REQ_DSPA_DCT_DIN 10
+#define DMA_REQ_DSPA_MAC 11
+#define DMA_REQ_EXT 12
+#define DMA_REQ_SDHC 13
+#define DMA_REQ_SPI1_R 14
+#define DMA_REQ_SPI1_T 15
+#define DMA_REQ_SSI_T 16
+#define DMA_REQ_SSI_R 17
+#define DMA_REQ_ASP_DAC 18
+#define DMA_REQ_ASP_ADC 19
+#define DMA_REQ_USP_EP(x) (20 + (x))
+#define DMA_REQ_SPI2_R 26
+#define DMA_REQ_SPI2_T 27
+#define DMA_REQ_UART2_T 28
+#define DMA_REQ_UART2_R 29
+#define DMA_REQ_UART1_T 30
+#define DMA_REQ_UART1_R 31
+
+/* mandatory for CONFIG_LL_DEBUG */
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index a86db64744a1..0313be720552 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -72,7 +72,8 @@
/* for mx27*/
#define OTG_BASE_ADDR USBOTG_BASE_ADDR
#define SAHARA_BASE_ADDR (AIPI_BASE_ADDR + 0x25000)
-#define EMMA_BASE_ADDR (AIPI_BASE_ADDR + 0x26400)
+#define EMMA_PP_BASE_ADDR (AIPI_BASE_ADDR + 0x26000)
+#define EMMA_PRP_BASE_ADDR (AIPI_BASE_ADDR + 0x26400)
#define CCM_BASE_ADDR (AIPI_BASE_ADDR + 0x27000)
#define SYSCTRL_BASE_ADDR (AIPI_BASE_ADDR + 0x27800)
#define IIM_BASE_ADDR (AIPI_BASE_ADDR + 0x28000)
@@ -288,16 +289,4 @@ extern int mx27_revision(void);
/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
#define ARCH_NR_GPIOS (192 + 16)
-/* OS clock tick rate */
-#define CLOCK_TICK_RATE 13300000
-
-/* Start of RAM */
-#define PHYS_OFFSET SDRAM_BASE_ADDR
-
-/* max interrupt lines count */
-#define NR_IRQS 256
-
-/* count of internal interrupt sources */
-#define MXC_MAX_INT_LINES 64
-
#endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 0536f8917bc0..de026654b00e 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -15,11 +15,6 @@
#error "Do not include directly."
#endif
-/*!
- * defines the hardware clock tick rate
- */
-#define CLOCK_TICK_RATE 16625000
-
/*
* MX31 memory map:
*
@@ -244,9 +239,6 @@
#define PCMCIA_IO_ADDRESS(x) \
(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-/* Start of physical RAM - On many MX31 platforms, this is the first SDRAM bank (CSD0) */
-#define PHYS_OFFSET CSD0_BASE_ADDR
-
/*
* Interrupt numbers
*/
@@ -315,23 +307,6 @@
#define MXC_INT_EXT_WDOG 62
#define MXC_INT_EXT_TV 63
-#define MXC_MAX_INT_LINES 64
-
-#define MXC_GPIO_INT_BASE MXC_MAX_INT_LINES
-#define MXC_MAX_GPIO_LINES (GPIO_NUM_PIN * GPIO_PORT_NUM)
-#define MXC_MAX_VIRTUAL_INTS 16
-
-#define NR_IRQS (MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES + MXC_MAX_VIRTUAL_INTS)
-
-/*!
- * Number of GPIO port as defined in the IC Spec
- */
-#define GPIO_PORT_NUM 3
-/*!
- * Number of GPIO pins per port
- */
-#define GPIO_NUM_PIN 32
-
#define PROD_SIGNATURE 0x1 /* For MX31 */
/* silicon revisions specific to i.MX31 */
diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h
index 130aebfbe168..6c19a134744b 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_timer.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_timer.h
@@ -26,7 +26,7 @@
#include <linux/clk.h>
#include <mach/hardware.h>
-#ifdef CONFIG_ARCH_IMX
+#ifdef CONFIG_ARCH_MX1
#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR)
#define TIMER_INTERRUPT TIM1_INT
@@ -65,7 +65,7 @@ static void gpt_irq_acknowledge(void)
{
__raw_writel(0, TIMER_BASE + MXC_TSTAT);
}
-#endif /* CONFIG_ARCH_IMX */
+#endif /* CONFIG_ARCH_MX1 */
#ifdef CONFIG_ARCH_MX2
#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 0b0af0253e91..07b4a73c9d2f 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -20,6 +20,12 @@
#ifndef __ASM_ARCH_MXC_TIMEX_H__
#define __ASM_ARCH_MXC_TIMEX_H__
-#include <mach/hardware.h> /* for CLOCK_TICK_RATE */
+#if defined CONFIG_ARCH_MX1
+#define CLOCK_TICK_RATE 16000000
+#elif defined CONFIG_ARCH_MX2
+#define CLOCK_TICK_RATE 13300000
+#elif defined CONFIG_ARCH_MX3
+#define CLOCK_TICK_RATE 16625000
+#endif
#endif /* __ASM_ARCH_MXC_TIMEX_H__ */