diff options
Diffstat (limited to 'arch/arm/plat-mxc/tzic.c')
| -rw-r--r-- | arch/arm/plat-mxc/tzic.c | 179 |
1 files changed, 179 insertions, 0 deletions
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c new file mode 100644 index 000000000000..5cfe328fc865 --- /dev/null +++ b/arch/arm/plat-mxc/tzic.c @@ -0,0 +1,179 @@ +/* + * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <mach/hardware.h> +#include <linux/io.h> +#include <asm/irq.h> +#include <asm/mach/irq.h> + +/* + ***************************************** + * TZIC Registers * + ***************************************** + */ +#define TZIC_BASE IO_ADDRESS(TZIC_BASE_ADDR) +#define TZIC_INTCNTL (TZIC_BASE + 0x0000) /* control register */ +#define TZIC_INTTYPE (TZIC_BASE + 0x0004) /* Controller type register */ +#define TZIC_IMPID (TZIC_BASE + 0x0008) /* Distributor Implementer Identification Register */ +#define TZIC_PRIOMASK (TZIC_BASE + 0x000C) /* Priority Mask Reg */ +#define TZIC_SYNCCTRL (TZIC_BASE + 0x0010) /* Synchronizer Control register */ +#define TZIC_DSMINT (TZIC_BASE + 0x0014) /* DSM interrupt Holdoffregister */ +#define TZIC_INTSEC0 (TZIC_BASE + 0x0080) /* interrupt security register 0 */ +#define TZIC_ENSET0 (TZIC_BASE + 0x0100) /* Enable Set Register 0 */ +#define TZIC_ENCLEAR0 (TZIC_BASE + 0x0180) /* Enable Clear Register 0 */ +#define TZIC_SRCSET0 (TZIC_BASE + 0x0200) /* Source Set Register 0 */ +#define TZIC_SRCCLAR0 (TZIC_BASE + 0x0280) /* Source Clear Register 0 */ +#define TZIC_PRIORITY0 (TZIC_BASE + 0x0400) /* Priority Register 0 */ +#define TZIC_PND0 (TZIC_BASE + 0x0D00) /* Pending Register 0 */ +#define TZIC_HIPND0 (TZIC_BASE + 0x0D80) /* High Priority Pending Register */ +#define TZIC_WAKEUP0 (TZIC_BASE + 0x0E00) /* Wakeup Config Register */ +#define TZIC_SWINT (TZIC_BASE + 0x0F00) /* Software Interrupt Rigger Register */ +#define TZIC_ID0 (TZIC_BASE + 0x0FD0) /* Indentification Register 0 */ + +/*! + * Disable interrupt number "irq" in the TZIC + * + * @param irq interrupt source number + */ +static void mxc_mask_irq(unsigned int irq) +{ + int index, off; + + index = irq >> 5; + off = irq & 0x1F; + __raw_writel(1 << off, TZIC_ENCLEAR0 + (index << 2)); +} + +/*! + * Enable interrupt number "irq" in the TZIC + * + * @param irq interrupt source number + */ +static void mxc_unmask_irq(unsigned int irq) +{ + int index, off; + + index = irq >> 5; + off = irq & 0x1F; + __raw_writel(1 << off, TZIC_ENSET0 + (index << 2)); +} + +static unsigned int wakeup_intr[4]; + +/*! + * Set interrupt number "irq" in the TZIC as a wake-up source. + * + * @param irq interrupt source number + * @param enable enable as wake-up if equal to non-zero + * disble as wake-up if equal to zero + * + * @return This function returns 0 on success. + */ +static int mxc_set_wake_irq(unsigned int irq, unsigned int enable) +{ + unsigned int index, off; + + index = irq >> 5; + off = irq & 0x1F; + + if (index > 3) + return -1; + + if (enable) + wakeup_intr[index] |= (1 << off); + else + wakeup_intr[index] &= ~(1 << off); + + return 0; +} + +static struct irq_chip mxc_tzic_chip = { + .name = "MXC_TZIC", + .ack = mxc_mask_irq, + .mask = mxc_mask_irq, + .unmask = mxc_unmask_irq, + .set_wake = mxc_set_wake_irq, +}; + +/*! + * This function initializes the TZIC hardware and disables all the + * interrupts. It registers the interrupt enable and disable functions + * to the kernel for each interrupt source. + */ +void __init mxc_init_irq(void) +{ + int i; + + /* put the TZIC into the reset value with + * all interrupts disabled + */ + i = __raw_readl(TZIC_INTCNTL); + + __raw_writel(0x80010001, TZIC_INTCNTL); + i = __raw_readl(TZIC_INTCNTL); + __raw_writel(0x1f, TZIC_PRIOMASK); + i = __raw_readl(TZIC_PRIOMASK); + __raw_writel(0x02, TZIC_SYNCCTRL); + i = __raw_readl(TZIC_SYNCCTRL); + for (i = 0; i < 4; i++) { + __raw_writel(0xFFFFFFFF, TZIC_INTSEC0 + i * 4); + } + /* disable all interrupts */ + for (i = 0; i < 4; i++) { + __raw_writel(0xFFFFFFFF, TZIC_ENCLEAR0 + i * 4); + } + + /* all IRQ no FIQ Warning :: No selection */ + + for (i = 0; i < MXC_MAX_INT_LINES; i++) { + set_irq_chip(i, &mxc_tzic_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + + printk(KERN_INFO "MXC IRQ initialized\n"); +} + +/*! + * enable wakeup interrupt + * + * @param is_idle 1 if called in idle loop (enset registers); + * 0 to be used when called from low power entry + * @return 0 if successful; non-zero otherwise + */ +int tzic_enable_wake(int is_idle) +{ + unsigned int i, v; + + __raw_writel(1, TZIC_DSMINT); + if (unlikely(__raw_readl(TZIC_DSMINT) == 0)) + return -EAGAIN; + + if (likely(is_idle)) { + for (i = 0; i < 4; i++) { + v = __raw_readl(TZIC_ENSET0 + i * 4); + __raw_writel(v, TZIC_WAKEUP0 + i * 4); + } + } else { + for (i = 0; i < 4; i++) { + v = wakeup_intr[i]; + __raw_writel(v, TZIC_WAKEUP0 + i * 4); + } + } + return 0; +} |