diff options
Diffstat (limited to 'arch/arm/plat-omap/include/mach/board.h')
| -rw-r--r-- | arch/arm/plat-omap/include/mach/board.h | 186 |
1 files changed, 186 insertions, 0 deletions
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h new file mode 100644 index 000000000000..54445642f35d --- /dev/null +++ b/arch/arm/plat-omap/include/mach/board.h @@ -0,0 +1,186 @@ +/* + * arch/arm/plat-omap/include/mach/board.h + * + * Information structures for board-specific data + * + * Copyright (C) 2004 Nokia Corporation + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + */ + +#ifndef _OMAP_BOARD_H +#define _OMAP_BOARD_H + +#include <linux/types.h> + +#include <mach/gpio-switch.h> + +/* Different peripheral ids */ +#define OMAP_TAG_CLOCK 0x4f01 +#define OMAP_TAG_MMC 0x4f02 +#define OMAP_TAG_SERIAL_CONSOLE 0x4f03 +#define OMAP_TAG_USB 0x4f04 +#define OMAP_TAG_LCD 0x4f05 +#define OMAP_TAG_GPIO_SWITCH 0x4f06 +#define OMAP_TAG_UART 0x4f07 +#define OMAP_TAG_FBMEM 0x4f08 +#define OMAP_TAG_STI_CONSOLE 0x4f09 +#define OMAP_TAG_CAMERA_SENSOR 0x4f0a + +#define OMAP_TAG_BOOT_REASON 0x4f80 +#define OMAP_TAG_FLASH_PART 0x4f81 +#define OMAP_TAG_VERSION_STR 0x4f82 + +struct omap_clock_config { + /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */ + u8 system_clock_type; +}; + +struct omap_mmc_conf { + unsigned enabled:1; + /* nomux means "standard" muxing is wrong on this board, and that + * board-specific code handled it before common init logic. + */ + unsigned nomux:1; + /* switch pin can be for card detect (default) or card cover */ + unsigned cover:1; + /* 4 wire signaling is optional, and is only used for SD/SDIO */ + unsigned wire4:1; + s16 power_pin; + s16 switch_pin; + s16 wp_pin; +}; + +struct omap_mmc_config { + struct omap_mmc_conf mmc[2]; +}; + +struct omap_serial_console_config { + u8 console_uart; + u32 console_speed; +}; + +struct omap_sti_console_config { + unsigned enable:1; + u8 channel; +}; + +struct omap_camera_sensor_config { + u16 reset_gpio; + int (*power_on)(void * data); + int (*power_off)(void * data); +}; + +struct omap_usb_config { + /* Configure drivers according to the connectors on your board: + * - "A" connector (rectagular) + * ... for host/OHCI use, set "register_host". + * - "B" connector (squarish) or "Mini-B" + * ... for device/gadget use, set "register_dev". + * - "Mini-AB" connector (very similar to Mini-B) + * ... for OTG use as device OR host, initialize "otg" + */ + unsigned register_host:1; + unsigned register_dev:1; + u8 otg; /* port number, 1-based: usb1 == 2 */ + + u8 hmc_mode; + + /* implicitly true if otg: host supports remote wakeup? */ + u8 rwc; + + /* signaling pins used to talk to transceiver on usbN: + * 0 == usbN unused + * 2 == usb0-only, using internal transceiver + * 3 == 3 wire bidirectional + * 4 == 4 wire bidirectional + * 6 == 6 wire unidirectional (or TLL) + */ + u8 pins[3]; +}; + +struct omap_lcd_config { + char panel_name[16]; + char ctrl_name[16]; + s16 nreset_gpio; + u8 data_lines; +}; + +struct device; +struct fb_info; +struct omap_backlight_config { + int default_intensity; + int (*set_power)(struct device *dev, int state); + int (*check_fb)(struct fb_info *fb); +}; + +struct omap_fbmem_config { + u32 start; + u32 size; +}; + +struct omap_pwm_led_platform_data { + const char *name; + int intensity_timer; + int blink_timer; + void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off); +}; + +/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */ +struct omap_gpio_switch_config { + char name[12]; + u16 gpio; + int flags:4; + int type:4; + int key_code:24; /* Linux key code */ +}; + +struct omap_uart_config { + /* Bit field of UARTs present; bit 0 --> UART1 */ + unsigned int enabled_uarts; +}; + + +struct omap_flash_part_config { + char part_table[0]; +}; + +struct omap_boot_reason_config { + char reason_str[12]; +}; + +struct omap_version_config { + char component[12]; + char version[12]; +}; + + +#include <mach/board-nokia.h> + +struct omap_board_config_entry { + u16 tag; + u16 len; + u8 data[0]; +}; + +struct omap_board_config_kernel { + u16 tag; + const void *data; +}; + +extern const void *__omap_get_config(u16 tag, size_t len, int nr); + +#define omap_get_config(tag, type) \ + ((const type *) __omap_get_config((tag), sizeof(type), 0)) +#define omap_get_nr_config(tag, type, nr) \ + ((const type *) __omap_get_config((tag), sizeof(type), (nr))) + +extern const void *omap_get_var_config(u16 tag, size_t *len); + +extern struct omap_board_config_kernel *omap_board_config; +extern int omap_board_config_size; + + +/* for TI reference platforms sharing the same debug card */ +extern int debug_card_init(u32 addr, unsigned gpio); + +#endif |