diff options
Diffstat (limited to 'arch/arm/plat-omap/include/plat')
| -rw-r--r-- | arch/arm/plat-omap/include/plat/clock.h | 2 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/dmtimer.h | 1 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/gpio.h | 20 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/mcbsp.h | 12 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/omap-pm.h | 8 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/omap_device.h | 9 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/plat/omap_hwmod.h | 20 |
7 files changed, 39 insertions, 33 deletions
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 21b1beb23e5e..df4b9683f17f 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -154,7 +154,7 @@ struct dpll_data { u16 max_multiplier; u8 last_rounded_n; u8 min_divider; - u8 max_divider; + u16 max_divider; u8 modes; #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) void __iomem *autoidle_reg; diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index d0f3a2d22fd3..eb5d16c60cd9 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -34,6 +34,7 @@ #include <linux/clk.h> #include <linux/delay.h> +#include <linux/io.h> #ifndef __ASM_ARCH_DMTIMER_H #define __ASM_ARCH_DMTIMER_H diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index ec97e00cb581..91e8de3db085 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -174,12 +174,32 @@ struct omap_gpio_dev_attr { bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ }; +struct omap_gpio_reg_offs { + u16 revision; + u16 direction; + u16 datain; + u16 dataout; + u16 set_dataout; + u16 clr_dataout; + u16 irqstatus; + u16 irqstatus2; + u16 irqenable; + u16 set_irqenable; + u16 clr_irqenable; + u16 debounce; + u16 debounce_en; + + bool irqenable_inv; +}; + struct omap_gpio_platform_data { u16 virtual_irq_start; int bank_type; int bank_width; /* GPIO bank width */ int bank_stride; /* Only needed for omap1 MPUIO */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ + + struct omap_gpio_reg_offs *regs; }; /* TODO: Analyze removing gpio_bank_count usage from driver code */ diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 6c5350832407..9882c657b2d4 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -33,7 +33,7 @@ #define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \ static struct platform_device omap_mcbsp##port_nr = { \ .name = "omap-mcbsp-dai", \ - .id = OMAP_MCBSP##port_nr, \ + .id = port_nr - 1, \ } #define MCBSP_CONFIG_TYPE2 0x2 @@ -332,14 +332,6 @@ struct omap_mcbsp_reg_cfg { }; typedef enum { - OMAP_MCBSP1 = 0, - OMAP_MCBSP2, - OMAP_MCBSP3, - OMAP_MCBSP4, - OMAP_MCBSP5 -} omap_mcbsp_id; - -typedef enum { OMAP_MCBSP_WORD_8 = 0, OMAP_MCBSP_WORD_12, OMAP_MCBSP_WORD_16, @@ -385,8 +377,6 @@ struct omap_mcbsp { void __iomem *io_base; u8 id; u8 free; - omap_mcbsp_word_length rx_word_length; - omap_mcbsp_word_length tx_word_length; int rx_irq; int tx_irq; diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h index c0a752053039..0840df813f4f 100644 --- a/arch/arm/plat-omap/include/plat/omap-pm.h +++ b/arch/arm/plat-omap/include/plat/omap-pm.h @@ -40,11 +40,7 @@ * framework starts. The "_if_" is to avoid name collisions with the * PM idle-loop code. */ -#ifdef CONFIG_OMAP_PM_NONE -#define omap_pm_if_early_init() 0 -#else int __init omap_pm_if_early_init(void); -#endif /** * omap_pm_if_init - OMAP PM init code called after clock fw init @@ -52,11 +48,7 @@ int __init omap_pm_if_early_init(void); * The main initialization code. OPP tables are passed in here. The * "_if_" is to avoid name collisions with the PM idle-loop code. */ -#ifdef CONFIG_OMAP_PM_NONE -#define omap_pm_if_init() 0 -#else int __init omap_pm_if_init(void); -#endif /** * omap_pm_if_exit - OMAP PM exit code diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index e4c349ff9fd8..ee405b36df4b 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -44,6 +44,10 @@ extern struct device omap_device_parent; #define OMAP_DEVICE_STATE_IDLE 2 #define OMAP_DEVICE_STATE_SHUTDOWN 3 +/* omap_device.flags values */ +#define OMAP_DEVICE_SUSPENDED BIT(0) +#define OMAP_DEVICE_NO_IDLE_ON_SUSPEND BIT(1) + /** * struct omap_device - omap_device wrapper for platform_devices * @pdev: platform_device @@ -73,6 +77,7 @@ struct omap_device { s8 pm_lat_level; u8 hwmods_cnt; u8 _state; + u8 flags; }; /* Device driver interface (call via platform_data fn ptrs) */ @@ -117,6 +122,10 @@ int omap_device_enable_hwmods(struct omap_device *od); int omap_device_disable_clocks(struct omap_device *od); int omap_device_enable_clocks(struct omap_device *od); +static inline void omap_device_disable_idle_on_suspend(struct omap_device *od) +{ + od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND; +} /* * Entries should be kept in latency order ascending diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 1adea9c62984..ce06ac6a9709 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -77,7 +77,6 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; #define HWMOD_IDLEMODE_FORCE (1 << 0) #define HWMOD_IDLEMODE_NO (1 << 1) #define HWMOD_IDLEMODE_SMART (1 << 2) -/* Slave idle mode flag only */ #define HWMOD_IDLEMODE_SMART_WKUP (1 << 3) /** @@ -98,7 +97,7 @@ struct omap_hwmod_mux_info { /** * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod * @name: name of the IRQ channel (module local name) - * @irq_ch: IRQ channel ID + * @irq: IRQ channel ID (should be non-negative except -1 = terminator) * * @name should be something short, e.g., "tx" or "rx". It is for use * by platform_get_resource_byname(). It is defined locally to the @@ -106,13 +105,13 @@ struct omap_hwmod_mux_info { */ struct omap_hwmod_irq_info { const char *name; - u16 irq; + s16 irq; }; /** * struct omap_hwmod_dma_info - DMA channels used by the hwmod * @name: name of the DMA channel (module local name) - * @dma_req: DMA request ID + * @dma_req: DMA request ID (should be non-negative except -1 = terminator) * * @name should be something short, e.g., "tx" or "rx". It is for use * by platform_get_resource_byname(). It is defined locally to the @@ -120,7 +119,7 @@ struct omap_hwmod_irq_info { */ struct omap_hwmod_dma_info { const char *name; - u16 dma_req; + s16 dma_req; }; /** @@ -220,7 +219,6 @@ struct omap_hwmod_addr_space { * @clk: interface clock: OMAP clock name * @_clk: pointer to the interface struct clk (filled in at runtime) * @fw: interface firewall data - * @addr_cnt: ARRAY_SIZE(@addr) * @width: OCP data width * @user: initiators using this interface (see OCP_USER_* macros above) * @flags: OCP interface flags (see OCPIF_* macros above) @@ -239,7 +237,6 @@ struct omap_hwmod_ocp_if { union { struct omap_hwmod_omap2_firewall omap2; } fw; - u8 addr_cnt; u8 width; u8 user; u8 flags; @@ -258,6 +255,7 @@ struct omap_hwmod_ocp_if { #define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT) #define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT) #define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT) +#define MSTANDBY_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT) /* omap_hwmod_sysconfig.sysc_flags capability flags */ #define SYSC_HAS_AUTOIDLE (1 << 0) @@ -468,8 +466,8 @@ struct omap_hwmod_class { * @name: name of the hwmod * @class: struct omap_hwmod_class * to the class of this hwmod * @od: struct omap_device currently associated with this hwmod (internal use) - * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt) - * @sdma_reqs: ptr to an array of System DMA request IDs (see sdma_reqs_cnt) + * @mpu_irqs: ptr to an array of MPU IRQs + * @sdma_reqs: ptr to an array of System DMA request IDs * @prcm: PRCM data pertaining to this hwmod * @main_clk: main clock: OMAP clock name * @_clk: pointer to the main struct clk (filled in at runtime) @@ -482,8 +480,6 @@ struct omap_hwmod_class { * @_sysc_cache: internal-use hwmod flags * @_mpu_rt_va: cached register target start address (internal use) * @_mpu_port_index: cached MPU register target slave ID (internal use) - * @mpu_irqs_cnt: number of @mpu_irqs - * @sdma_reqs_cnt: number of @sdma_reqs * @opt_clks_cnt: number of @opt_clks * @master_cnt: number of @master entries * @slaves_cnt: number of @slave entries @@ -531,8 +527,6 @@ struct omap_hwmod { u16 flags; u8 _mpu_port_index; u8 response_lat; - u8 mpu_irqs_cnt; - u8 sdma_reqs_cnt; u8 rst_lines_cnt; u8 opt_clks_cnt; u8 masters_cnt; |