diff options
Diffstat (limited to 'arch/arm/plat-s3c24xx/s3c2443-clock.c')
| -rw-r--r-- | arch/arm/plat-s3c24xx/s3c2443-clock.c | 231 |
1 files changed, 191 insertions, 40 deletions
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c index 82f2d4a39291..5a21b15b2a97 100644 --- a/arch/arm/plat-s3c24xx/s3c2443-clock.c +++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c @@ -56,7 +56,6 @@ int s3c2443_clkcon_enable_s(struct clk *clk, int enable) struct clk clk_mpllref = { .name = "mpllref", .parent = &clk_xtal, - .id = -1, }; static struct clk *clk_epllref_sources[] = { @@ -69,7 +68,6 @@ static struct clk *clk_epllref_sources[] = { struct clksrc_clk clk_epllref = { .clk = { .name = "epllref", - .id = -1, }, .sources = &(struct clksrc_sources) { .sources = clk_epllref_sources, @@ -92,7 +90,6 @@ struct clksrc_clk clk_esysclk = { .clk = { .name = "esysclk", .parent = &clk_epll, - .id = -1, }, .sources = &(struct clksrc_sources) { .sources = clk_sysclk_sources, @@ -115,7 +112,6 @@ static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) static struct clk clk_mdivclk = { .name = "mdivclk", .parent = &clk_mpllref, - .id = -1, .ops = &(struct clk_ops) { .get_rate = s3c2443_getrate_mdivclk, }, @@ -132,7 +128,6 @@ struct clksrc_clk clk_msysclk = { .clk = { .name = "msysclk", .parent = &clk_xtal, - .id = -1, }, .sources = &(struct clksrc_sources) { .sources = clk_msysclk_sources, @@ -159,13 +154,130 @@ static unsigned long s3c2443_prediv_getrate(struct clk *clk) static struct clk clk_prediv = { .name = "prediv", - .id = -1, .parent = &clk_msysclk.clk, .ops = &(struct clk_ops) { .get_rate = s3c2443_prediv_getrate, }, }; +/* armdiv + * + * this clock is sourced from msysclk and can have a number of + * divider values applied to it to then be fed into armclk. +*/ + +static unsigned int *armdiv; +static int nr_armdiv; +static int armdivmask; + +static unsigned long s3c2443_armclk_roundrate(struct clk *clk, + unsigned long rate) +{ + unsigned long parent = clk_get_rate(clk->parent); + unsigned long calc; + unsigned best = 256; /* bigger than any value */ + unsigned div; + int ptr; + + if (!nr_armdiv) + return -EINVAL; + + for (ptr = 0; ptr < nr_armdiv; ptr++) { + div = armdiv[ptr]; + if (div) { + /* cpufreq provides 266mhz as 266666000 not 266666666 */ + calc = (parent / div / 1000) * 1000; + if (calc <= rate && div < best) + best = div; + } + } + + return parent / best; +} + +static unsigned long s3c2443_armclk_getrate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned long clkcon0; + int val; + + if (!nr_armdiv || !armdivmask) + return -EINVAL; + + clkcon0 = __raw_readl(S3C2443_CLKDIV0); + clkcon0 &= armdivmask; + val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT; + + return rate / armdiv[val]; +} + +static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) +{ + unsigned long parent = clk_get_rate(clk->parent); + unsigned long calc; + unsigned div; + unsigned best = 256; /* bigger than any value */ + int ptr; + int val = -1; + + if (!nr_armdiv || !armdivmask) + return -EINVAL; + + for (ptr = 0; ptr < nr_armdiv; ptr++) { + div = armdiv[ptr]; + if (div) { + /* cpufreq provides 266mhz as 266666000 not 266666666 */ + calc = (parent / div / 1000) * 1000; + if (calc <= rate && div < best) { + best = div; + val = ptr; + } + } + } + + if (val >= 0) { + unsigned long clkcon0; + + clkcon0 = __raw_readl(S3C2443_CLKDIV0); + clkcon0 &= ~armdivmask; + clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; + __raw_writel(clkcon0, S3C2443_CLKDIV0); + } + + return (val == -1) ? -EINVAL : 0; +} + +static struct clk clk_armdiv = { + .name = "armdiv", + .parent = &clk_msysclk.clk, + .ops = &(struct clk_ops) { + .round_rate = s3c2443_armclk_roundrate, + .get_rate = s3c2443_armclk_getrate, + .set_rate = s3c2443_armclk_setrate, + }, +}; + +/* armclk + * + * this is the clock fed into the ARM core itself, from armdiv or from hclk. + */ + +static struct clk *clk_arm_sources[] = { + [0] = &clk_armdiv, + [1] = &clk_h, +}; + +static struct clksrc_clk clk_arm = { + .clk = { + .name = "armclk", + }, + .sources = &(struct clksrc_sources) { + .sources = clk_arm_sources, + .nr_sources = ARRAY_SIZE(clk_arm_sources), + }, + .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 }, +}; + /* usbhost * * usb host bus-clock, usually 48MHz to provide USB bus clock timing @@ -174,7 +286,6 @@ static struct clk clk_prediv = { static struct clksrc_clk clk_usb_bus_host = { .clk = { .name = "usb-bus-host-parent", - .id = -1, .parent = &clk_esysclk.clk, .ctrlbit = S3C2443_SCLKCON_USBHOST, .enable = s3c2443_clkcon_enable_s, @@ -189,7 +300,6 @@ static struct clksrc_clk clksrc_clks[] = { /* ART baud-rate clock sourced from esysclk via a divisor */ .clk = { .name = "uartclk", - .id = -1, .parent = &clk_esysclk.clk, }, .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, @@ -197,7 +307,6 @@ static struct clksrc_clk clksrc_clks[] = { /* camera interface bus-clock, divided down from esysclk */ .clk = { .name = "camif-upll", /* same as 2440 name */ - .id = -1, .parent = &clk_esysclk.clk, .ctrlbit = S3C2443_SCLKCON_CAMCLK, .enable = s3c2443_clkcon_enable_s, @@ -206,7 +315,6 @@ static struct clksrc_clk clksrc_clks[] = { }, { .clk = { .name = "display-if", - .id = -1, .parent = &clk_esysclk.clk, .ctrlbit = S3C2443_SCLKCON_DISPCLK, .enable = s3c2443_clkcon_enable_s, @@ -215,17 +323,70 @@ static struct clksrc_clk clksrc_clks[] = { }, }; +static struct clk clk_i2s_ext = { + .name = "i2s-ext", +}; + +/* i2s_eplldiv + * + * This clock is the output from the I2S divisor of ESYSCLK, and is separate + * from the mux that comes after it (cannot merge into one single clock) +*/ + +static struct clksrc_clk clk_i2s_eplldiv = { + .clk = { + .name = "i2s-eplldiv", + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, }, +}; + +/* i2s-ref + * + * i2s bus reference clock, selectable from external, esysclk or epllref + * + * Note, this used to be two clocks, but was compressed into one. +*/ + +static struct clk *clk_i2s_srclist[] = { + [0] = &clk_i2s_eplldiv.clk, + [1] = &clk_i2s_ext, + [2] = &clk_epllref.clk, + [3] = &clk_epllref.clk, +}; + +static struct clksrc_clk clk_i2s = { + .clk = { + .name = "i2s-if", + .ctrlbit = S3C2443_SCLKCON_I2SCLK, + .enable = s3c2443_clkcon_enable_s, + + }, + .sources = &(struct clksrc_sources) { + .sources = clk_i2s_srclist, + .nr_sources = ARRAY_SIZE(clk_i2s_srclist), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, +}; static struct clk init_clocks_off[] = { { + .name = "iis", + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_IIS, + }, { + .name = "hsspi", + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_HSSPI, + }, { .name = "adc", - .id = -1, .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_ADC, }, { .name = "i2c", - .id = -1, .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_IIC, @@ -235,136 +396,118 @@ static struct clk init_clocks_off[] = { static struct clk init_clocks[] = { { .name = "dma", - .id = 0, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA0, }, { .name = "dma", - .id = 1, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA1, }, { .name = "dma", - .id = 2, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA2, }, { .name = "dma", - .id = 3, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA3, }, { .name = "dma", - .id = 4, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA4, }, { .name = "dma", - .id = 5, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA5, }, { .name = "hsmmc", - .id = 1, + .devname = "s3c-sdhci.1", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_HSMMC, }, { .name = "gpio", - .id = -1, .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_GPIO, }, { .name = "usb-host", - .id = -1, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_USBH, }, { .name = "usb-device", - .id = -1, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_USBD, }, { .name = "lcd", - .id = -1, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_LCDC, }, { .name = "timers", - .id = -1, .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_PWMT, }, { .name = "cfc", - .id = -1, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_CFC, }, { .name = "ssmc", - .id = -1, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_SSMC, }, { .name = "uart", - .id = 0, + .devname = "s3c2440-uart.0", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_UART0, }, { .name = "uart", - .id = 1, + .devname = "s3c2440-uart.1", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_UART1, }, { .name = "uart", - .id = 2, + .devname = "s3c2440-uart.2", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_UART2, }, { .name = "uart", - .id = 3, + .devname = "s3c2440-uart.3", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_UART3, }, { .name = "rtc", - .id = -1, .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_RTC, }, { .name = "watchdog", - .id = -1, .parent = &clk_p, .ctrlbit = S3C2443_PCLKCON_WDT, }, { .name = "ac97", - .id = -1, .parent = &clk_p, .ctrlbit = S3C2443_PCLKCON_AC97, }, { .name = "nand", - .id = -1, .parent = &clk_h, }, { .name = "usb-bus-host", - .id = -1, .parent = &clk_usb_bus_host.clk, } }; @@ -378,8 +521,7 @@ static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0) /* EPLLCON compatible enough to get on/off information */ -void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll, - fdiv_fn get_fdiv) +void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll) { unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); @@ -399,7 +541,7 @@ void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll, pll = get_mpll(mpllcon, xtal); clk_msysclk.clk.rate = pll; - fclk = pll / get_fdiv(clkdiv0); + fclk = clk_get_rate(&clk_armdiv); hclk = s3c2443_prediv_getrate(&clk_prediv); hclk /= s3c2443_get_hdiv(clkdiv0); pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); @@ -434,20 +576,29 @@ static struct clk *clks[] __initdata = { &clk_ext, &clk_epll, &clk_usb_bus, + &clk_armdiv, }; static struct clksrc_clk *clksrcs[] __initdata = { + &clk_i2s_eplldiv, + &clk_i2s, &clk_usb_bus_host, &clk_epllref, &clk_esysclk, &clk_msysclk, + &clk_arm, }; void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, - fdiv_fn get_fdiv) + unsigned int *divs, int nr_divs, + int divmask) { int ptr; + armdiv = divs; + nr_armdiv = nr_divs; + armdivmask = divmask; + /* s3c2443 parents h and p clocks from prediv */ clk_h.parent = &clk_prediv; clk_p.parent = &clk_prediv; @@ -468,5 +619,5 @@ void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c2443_common_setup_clocks(get_mpll, get_fdiv); + s3c2443_common_setup_clocks(get_mpll); } |