diff options
Diffstat (limited to 'arch/arm26/nwfpe/softfloat-specialize')
| -rw-r--r-- | arch/arm26/nwfpe/softfloat-specialize | 366 |
1 files changed, 0 insertions, 366 deletions
diff --git a/arch/arm26/nwfpe/softfloat-specialize b/arch/arm26/nwfpe/softfloat-specialize deleted file mode 100644 index acf409144763..000000000000 --- a/arch/arm26/nwfpe/softfloat-specialize +++ /dev/null @@ -1,366 +0,0 @@ - -/* -=============================================================================== - -This C source fragment is part of the SoftFloat IEC/IEEE Floating-point -Arithmetic Package, Release 2. - -Written by John R. Hauser. This work was made possible in part by the -International Computer Science Institute, located at Suite 600, 1947 Center -Street, Berkeley, California 94704. Funding was partially provided by the -National Science Foundation under grant MIP-9311980. The original version -of this code was written as part of a project to build a fixed-point vector -processor in collaboration with the University of California at Berkeley, -overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/ -arithmetic/softfloat.html'. - -THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort -has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT -TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO -PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY -AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE. - -Derivative works are acceptable, even for commercial purposes, so long as -(1) they include prominent notice that the work is derivative, and (2) they -include prominent notice akin to these three paragraphs for those parts of -this code that are retained. - -=============================================================================== -*/ - -/* -------------------------------------------------------------------------------- -Underflow tininess-detection mode, statically initialized to default value. -(The declaration in `softfloat.h' must match the `int8' type here.) -------------------------------------------------------------------------------- -*/ -int8 float_detect_tininess = float_tininess_after_rounding; - -/* -------------------------------------------------------------------------------- -Raises the exceptions specified by `flags'. Floating-point traps can be -defined here if desired. It is currently not possible for such a trap to -substitute a result value. If traps are not implemented, this routine -should be simply `float_exception_flags |= flags;'. - -ScottB: November 4, 1998 -Moved this function out of softfloat-specialize into fpmodule.c. -This effectively isolates all the changes required for integrating with the -Linux kernel into fpmodule.c. Porting to NetBSD should only require modifying -fpmodule.c to integrate with the NetBSD kernel (I hope!). -------------------------------------------------------------------------------- -void float_raise( int8 flags ) -{ - float_exception_flags |= flags; -} -*/ - -/* -------------------------------------------------------------------------------- -Internal canonical NaN format. -------------------------------------------------------------------------------- -*/ -typedef struct { - flag sign; - bits64 high, low; -} commonNaNT; - -/* -------------------------------------------------------------------------------- -The pattern for a default generated single-precision NaN. -------------------------------------------------------------------------------- -*/ -#define float32_default_nan 0xFFFFFFFF - -/* -------------------------------------------------------------------------------- -Returns 1 if the single-precision floating-point value `a' is a NaN; -otherwise returns 0. -------------------------------------------------------------------------------- -*/ -flag float32_is_nan( float32 a ) -{ - - return ( 0xFF000000 < (bits32) ( a<<1 ) ); - -} - -/* -------------------------------------------------------------------------------- -Returns 1 if the single-precision floating-point value `a' is a signaling -NaN; otherwise returns 0. -------------------------------------------------------------------------------- -*/ -flag float32_is_signaling_nan( float32 a ) -{ - - return ( ( ( a>>22 ) & 0x1FF ) == 0x1FE ) && ( a & 0x003FFFFF ); - -} - -/* -------------------------------------------------------------------------------- -Returns the result of converting the single-precision floating-point NaN -`a' to the canonical NaN format. If `a' is a signaling NaN, the invalid -exception is raised. -------------------------------------------------------------------------------- -*/ -static commonNaNT float32ToCommonNaN( float32 a ) -{ - commonNaNT z; - - if ( float32_is_signaling_nan( a ) ) float_raise( float_flag_invalid ); - z.sign = a>>31; - z.low = 0; - z.high = ( (bits64) a )<<41; - return z; - -} - -/* -------------------------------------------------------------------------------- -Returns the result of converting the canonical NaN `a' to the single- -precision floating-point format. -------------------------------------------------------------------------------- -*/ -static float32 commonNaNToFloat32( commonNaNT a ) -{ - - return ( ( (bits32) a.sign )<<31 ) | 0x7FC00000 | ( a.high>>41 ); - -} - -/* -------------------------------------------------------------------------------- -Takes two single-precision floating-point values `a' and `b', one of which -is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a -signaling NaN, the invalid exception is raised. -------------------------------------------------------------------------------- -*/ -static float32 propagateFloat32NaN( float32 a, float32 b ) -{ - flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN; - - aIsNaN = float32_is_nan( a ); - aIsSignalingNaN = float32_is_signaling_nan( a ); - bIsNaN = float32_is_nan( b ); - bIsSignalingNaN = float32_is_signaling_nan( b ); - a |= 0x00400000; - b |= 0x00400000; - if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid ); - if ( aIsNaN ) { - return ( aIsSignalingNaN & bIsNaN ) ? b : a; - } - else { - return b; - } - -} - -/* -------------------------------------------------------------------------------- -The pattern for a default generated double-precision NaN. -------------------------------------------------------------------------------- -*/ -#define float64_default_nan LIT64( 0xFFFFFFFFFFFFFFFF ) - -/* -------------------------------------------------------------------------------- -Returns 1 if the double-precision floating-point value `a' is a NaN; -otherwise returns 0. -------------------------------------------------------------------------------- -*/ -flag float64_is_nan( float64 a ) -{ - - return ( LIT64( 0xFFE0000000000000 ) < (bits64) ( a<<1 ) ); - -} - -/* -------------------------------------------------------------------------------- -Returns 1 if the double-precision floating-point value `a' is a signaling -NaN; otherwise returns 0. -------------------------------------------------------------------------------- -*/ -flag float64_is_signaling_nan( float64 a ) -{ - - return - ( ( ( a>>51 ) & 0xFFF ) == 0xFFE ) - && ( a & LIT64( 0x0007FFFFFFFFFFFF ) ); - -} - -/* -------------------------------------------------------------------------------- -Returns the result of converting the double-precision floating-point NaN -`a' to the canonical NaN format. If `a' is a signaling NaN, the invalid -exception is raised. -------------------------------------------------------------------------------- -*/ -static commonNaNT float64ToCommonNaN( float64 a ) -{ - commonNaNT z; - - if ( float64_is_signaling_nan( a ) ) float_raise( float_flag_invalid ); - z.sign = a>>63; - z.low = 0; - z.high = a<<12; - return z; - -} - -/* -------------------------------------------------------------------------------- -Returns the result of converting the canonical NaN `a' to the double- -precision floating-point format. -------------------------------------------------------------------------------- -*/ -static float64 commonNaNToFloat64( commonNaNT a ) -{ - - return - ( ( (bits64) a.sign )<<63 ) - | LIT64( 0x7FF8000000000000 ) - | ( a.high>>12 ); - -} - -/* -------------------------------------------------------------------------------- -Takes two double-precision floating-point values `a' and `b', one of which -is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a -signaling NaN, the invalid exception is raised. -------------------------------------------------------------------------------- -*/ -static float64 propagateFloat64NaN( float64 a, float64 b ) -{ - flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN; - - aIsNaN = float64_is_nan( a ); - aIsSignalingNaN = float64_is_signaling_nan( a ); - bIsNaN = float64_is_nan( b ); - bIsSignalingNaN = float64_is_signaling_nan( b ); - a |= LIT64( 0x0008000000000000 ); - b |= LIT64( 0x0008000000000000 ); - if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid ); - if ( aIsNaN ) { - return ( aIsSignalingNaN & bIsNaN ) ? b : a; - } - else { - return b; - } - -} - -#ifdef FLOATX80 - -/* -------------------------------------------------------------------------------- -The pattern for a default generated extended double-precision NaN. The -`high' and `low' values hold the most- and least-significant bits, -respectively. -------------------------------------------------------------------------------- -*/ -#define floatx80_default_nan_high 0xFFFF -#define floatx80_default_nan_low LIT64( 0xFFFFFFFFFFFFFFFF ) - -/* -------------------------------------------------------------------------------- -Returns 1 if the extended double-precision floating-point value `a' is a -NaN; otherwise returns 0. -------------------------------------------------------------------------------- -*/ -flag floatx80_is_nan( floatx80 a ) -{ - - return ( ( a.high & 0x7FFF ) == 0x7FFF ) && (bits64) ( a.low<<1 ); - -} - -/* -------------------------------------------------------------------------------- -Returns 1 if the extended double-precision floating-point value `a' is a -signaling NaN; otherwise returns 0. -------------------------------------------------------------------------------- -*/ -flag floatx80_is_signaling_nan( floatx80 a ) -{ - //register int lr; - bits64 aLow; - - //__asm__("mov %0, lr" : : "g" (lr)); - //fp_printk("floatx80_is_signalling_nan() called from 0x%08x\n",lr); - aLow = a.low & ~ LIT64( 0x4000000000000000 ); - return - ( ( a.high & 0x7FFF ) == 0x7FFF ) - && (bits64) ( aLow<<1 ) - && ( a.low == aLow ); - -} - -/* -------------------------------------------------------------------------------- -Returns the result of converting the extended double-precision floating- -point NaN `a' to the canonical NaN format. If `a' is a signaling NaN, the -invalid exception is raised. -------------------------------------------------------------------------------- -*/ -static commonNaNT floatx80ToCommonNaN( floatx80 a ) -{ - commonNaNT z; - - if ( floatx80_is_signaling_nan( a ) ) float_raise( float_flag_invalid ); - z.sign = a.high>>15; - z.low = 0; - z.high = a.low<<1; - return z; - -} - -/* -------------------------------------------------------------------------------- -Returns the result of converting the canonical NaN `a' to the extended -double-precision floating-point format. -------------------------------------------------------------------------------- -*/ -static floatx80 commonNaNToFloatx80( commonNaNT a ) -{ - floatx80 z; - - z.low = LIT64( 0xC000000000000000 ) | ( a.high>>1 ); - z.high = ( ( (bits16) a.sign )<<15 ) | 0x7FFF; - return z; - -} - -/* -------------------------------------------------------------------------------- -Takes two extended double-precision floating-point values `a' and `b', one -of which is a NaN, and returns the appropriate NaN result. If either `a' or -`b' is a signaling NaN, the invalid exception is raised. -------------------------------------------------------------------------------- -*/ -static floatx80 propagateFloatx80NaN( floatx80 a, floatx80 b ) -{ - flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN; - - aIsNaN = floatx80_is_nan( a ); - aIsSignalingNaN = floatx80_is_signaling_nan( a ); - bIsNaN = floatx80_is_nan( b ); - bIsSignalingNaN = floatx80_is_signaling_nan( b ); - a.low |= LIT64( 0xC000000000000000 ); - b.low |= LIT64( 0xC000000000000000 ); - if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid ); - if ( aIsNaN ) { - return ( aIsSignalingNaN & bIsNaN ) ? b : a; - } - else { - return b; - } - -} - -#endif |