diff options
Diffstat (limited to 'arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts')
| -rw-r--r-- | arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 38 |
1 files changed, 21 insertions, 17 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 3f086ed7de05..989d33ac6eae 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -18,7 +18,6 @@ aliases { serial0 = &uart_AO; - serial1 = &uart_A; serial2 = &uart_AO_B; }; @@ -63,11 +62,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + power-button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; @@ -242,11 +239,6 @@ amlogic,tx-delay-ns = <2>; - /* External PHY reset is shared with internal PHY Led signals */ - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - /* External PHY is in RGMII */ phy-mode = "rgmii"; @@ -257,6 +249,11 @@ external_phy: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <25 IRQ_TYPE_LEVEL_LOW>; @@ -324,12 +321,13 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; bus-width = <4>; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -349,11 +347,12 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; @@ -366,17 +365,16 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; disable-wp; mmc-ddr-1_8v; mmc-hs200-1_8v; - mmc-hs400-1_8v; mmc-pwrseq = <&emmc_pwrseq>; vmmc-supply = <&vcc_3v3>; @@ -404,8 +402,14 @@ /* This one is connected to the Bluetooth module */ &uart_A { status = "okay"; - pinctrl-0 = <&uart_a_pins>; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + }; }; /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ |