diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 243 |
1 files changed, 212 insertions, 31 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index a79f42a9618e..582dbd5eaeea 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -34,23 +34,63 @@ conn_subsys: bus@5b000000 { clock-output-names = "conn_ipg_clk"; }; + conn_bch_clk: clock-conn-bch { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + clock-output-names = "conn_bch_clk"; + }; + + usbotg1: usb@5b0d0000 { + compatible = "fsl,imx8qm-usb", "fsl,imx7ulp-usb", + "fsl,imx27-usb"; + reg = <0x5b0d0000 0x200>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + clocks = <&usb2_lpcg 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + power-domains = <&pd IMX_SC_R_USB_0>; + status = "disabled"; + }; + + usbmisc1: usbmisc@5b0d0200 { + #index-cells = <1>; + compatible = "fsl,imx7ulp-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x5b0d0200 0x200>; + }; + + usbphy1: usbphy@0x5b100000 { + compatible = "fsl,imx8qm-usbphy", "fsl,imx7ulp-usbphy", + "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; + reg = <0x5b100000 0x1000>; + clocks = <&usb2_lpcg 1>; + power-domains = <&pd IMX_SC_R_USB_0_PHY>; + status = "disabled"; + }; + usdhc1: mmc@5b010000 { interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b010000 0x10000>; - clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>, - <&sdhc0_lpcg IMX_LPCG_CLK_5>, - <&sdhc0_lpcg IMX_LPCG_CLK_0>; + clocks = <&sdhc0_lpcg 1>, + <&sdhc0_lpcg 0>, + <&sdhc0_lpcg 2>; clock-names = "ipg", "per", "ahb"; power-domains = <&pd IMX_SC_R_SDHC_0>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; usdhc2: mmc@5b020000 { interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b020000 0x10000>; - clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>, - <&sdhc1_lpcg IMX_LPCG_CLK_5>, - <&sdhc1_lpcg IMX_LPCG_CLK_0>; + clocks = <&sdhc1_lpcg 1>, + <&sdhc1_lpcg 0>, + <&sdhc1_lpcg 2>; clock-names = "ipg", "per", "ahb"; power-domains = <&pd IMX_SC_R_SDHC_1>; fsl,tuning-start-tap = <20>; @@ -61,11 +101,13 @@ conn_subsys: bus@5b000000 { usdhc3: mmc@5b030000 { interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b030000 0x10000>; - clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>, - <&sdhc2_lpcg IMX_LPCG_CLK_5>, - <&sdhc2_lpcg IMX_LPCG_CLK_0>; + clocks = <&sdhc2_lpcg 1>, + <&sdhc2_lpcg 0>, + <&sdhc2_lpcg 2>; clock-names = "ipg", "per", "ahb"; power-domains = <&pd IMX_SC_R_SDHC_2>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; status = "disabled"; }; @@ -75,11 +117,12 @@ conn_subsys: bus@5b000000 { <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&enet0_lpcg IMX_LPCG_CLK_4>, - <&enet0_lpcg IMX_LPCG_CLK_2>, - <&enet0_lpcg IMX_LPCG_CLK_3>, - <&enet0_lpcg IMX_LPCG_CLK_0>; - clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + clocks = <&enet0_lpcg 4>, + <&enet0_lpcg 2>, + <&enet0_lpcg 3>, + <&enet0_lpcg 0>, + <&enet0_lpcg 1>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp", "enet_2x_txclk"; assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>; assigned-clock-rates = <250000000>, <125000000>; @@ -95,11 +138,12 @@ conn_subsys: bus@5b000000 { <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&enet1_lpcg IMX_LPCG_CLK_4>, - <&enet1_lpcg IMX_LPCG_CLK_2>, - <&enet1_lpcg IMX_LPCG_CLK_3>, - <&enet1_lpcg IMX_LPCG_CLK_0>; - clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + clocks = <&enet1_lpcg 4>, + <&enet1_lpcg 2>, + <&enet1_lpcg 3>, + <&enet1_lpcg 0>, + <&enet1_lpcg 1>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp", "enet_2x_txclk"; assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, <&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>; assigned-clock-rates = <250000000>, <125000000>; @@ -109,6 +153,56 @@ conn_subsys: bus@5b000000 { status = "disabled"; }; + usb3_phy: usb-phy@5b160000 { + compatible = "nxp,salvo-phy"; + reg = <0x5B160000 0x40000>; + clocks = <&usb3_lpcg 4>; + clock-names = "salvo_phy_clk"; + power-domains = <&pd IMX_SC_R_USB_2_PHY>; + #phy-cells = <0>; + status = "disabled"; + }; + + usbotg3: usb@5b110000 { + compatible = "fsl,imx8qm-usb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0x5B110000 0x10000>; + clocks = <&usb3_lpcg 1>, + <&usb3_lpcg 0>, + <&usb3_lpcg 5>, + <&usb3_lpcg 2>, + <&usb3_lpcg 3>; + clock-names = "usb3_lpm_clk", "usb3_bus_clk", "usb3_aclk", + "usb3_ipg_clk", "usb3_core_pclk"; + assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>, + <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>; + assigned-clock-rates = <125000000>, <12000000>, <250000000>; + power-domains = <&pd IMX_SC_R_USB_2>; + status = "disabled"; + + usbotg3_cdns3: usb@5b120000 { + compatible = "cdns,usb3"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host", "peripheral", "otg", "wakeup"; + reg = <0x5B130000 0x10000>, /* memory area for HOST registers */ + <0x5B140000 0x10000>, /* memory area for DEVICE registers */ + <0x5B120000 0x10000>; /* memory area for OTG/DRD registers */ + reg-names = "xhci", "dev", "otg"; + phys = <&usb3_phy>; + phy-names = "cdns3,usb3-phy"; + status = "disabled"; + }; + }; + /* LPCG clocks */ sdhc0_lpcg: clock-controller@5b200000 { compatible = "fsl,imx8qxp-lpcg"; @@ -116,8 +210,7 @@ conn_subsys: bus@5b000000 { #clock-cells = <1>; clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>, <&conn_ipg_clk>, <&conn_axi_clk>; - clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, - <IMX_LPCG_CLK_5>; + bit-offset = <0 16 20>; clock-output-names = "sdhc0_lpcg_per_clk", "sdhc0_lpcg_ipg_clk", "sdhc0_lpcg_ahb_clk"; @@ -130,8 +223,7 @@ conn_subsys: bus@5b000000 { #clock-cells = <1>; clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>, <&conn_ipg_clk>, <&conn_axi_clk>; - clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, - <IMX_LPCG_CLK_5>; + bit-offset = <0 16 20>; clock-output-names = "sdhc1_lpcg_per_clk", "sdhc1_lpcg_ipg_clk", "sdhc1_lpcg_ahb_clk"; @@ -144,8 +236,7 @@ conn_subsys: bus@5b000000 { #clock-cells = <1>; clocks = <&clk IMX_SC_R_SDHC_2 IMX_SC_PM_CLK_PER>, <&conn_ipg_clk>, <&conn_axi_clk>; - clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, - <IMX_LPCG_CLK_5>; + bit-offset = <0 16 20>; clock-output-names = "sdhc2_lpcg_per_clk", "sdhc2_lpcg_ipg_clk", "sdhc2_lpcg_ahb_clk"; @@ -162,9 +253,7 @@ conn_subsys: bus@5b000000 { <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>, <&conn_ipg_clk>, <&conn_ipg_clk>; - clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, - <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>, - <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; + bit-offset = <0 4 8 12 16 20>; clock-output-names = "enet0_lpcg_timer_clk", "enet0_lpcg_txc_sampling_clk", "enet0_lpcg_ahb_clk", @@ -184,9 +273,7 @@ conn_subsys: bus@5b000000 { <&clk IMX_SC_R_ENET_1 IMX_SC_C_TXCLK>, <&conn_ipg_clk>, <&conn_ipg_clk>; - clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, - <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>, - <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; + bit-offset = <0 4 8 12 16 20>; clock-output-names = "enet1_lpcg_timer_clk", "enet1_lpcg_txc_sampling_clk", "enet1_lpcg_ahb_clk", @@ -195,4 +282,98 @@ conn_subsys: bus@5b000000 { "enet1_lpcg_ipg_s_clk"; power-domains = <&pd IMX_SC_R_ENET_1>; }; + + usb2_lpcg: clock-controller@5b270000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b270000 0x10000>; + #clock-cells = <1>; + clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; + bit-offset = <24 28>; + clock-output-names = "usboh3_ahb_clk", + "usboh3_phy_ipg_clk"; + power-domains = <&pd IMX_SC_R_USB_0_PHY>; + }; + + usb3_lpcg: clock-controller@5b280000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b280000 0x10000>; + #clock-cells = <1>; + bit-offset = <0 4 16 20 24 28>; + clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>, + <&conn_ipg_clk>, + <&conn_ipg_clk>, + <&conn_ipg_clk>, + <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>; + clock-output-names = "usb3_app_clk", + "usb3_lpm_clk", + "usb3_ipg_clk", + "usb3_core_pclk", + "usb3_phy_clk", + "usb3_aclk"; + power-domains = <&pd IMX_SC_R_USB_2_PHY>; + }; + + rawnand_0_lpcg: clock-controller@5b290000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b290000 0x4>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_MST_BUS>, + <&conn_axi_clk>, + <&conn_axi_clk>; + bit-offset = <0 4 16 20>; + clock-output-names = "bch_clk", + "gpmi_clk", + "gpmi_apb_clk", + "bch_apb_clk"; + power-domains = <&pd IMX_SC_R_NAND>; + }; + + rawnand_4_lpcg: clock-controller@5b290004 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b290004 0x10000>; + #clock-cells = <1>; + clocks = <&conn_axi_clk>; + bit-offset = <16>; + clock-output-names = "apbhdma_hclk"; + power-domains = <&pd IMX_SC_R_NAND>; + }; + + dma_apbh: dma-apbh@5b810000 { + compatible = "fsl,imx28-dma-apbh"; + reg = <0x5b810000 0x2000>; + interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&rawnand_4_lpcg 0>; + clock-names = "apbhdma_hclk"; + power-domains = <&pd IMX_SC_R_NAND>; + }; + + gpmi: gpmi-nand@5b812000{ + compatible = "fsl,imx8qxp-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x5b812000 0x2000>, <0x5b814000 0x2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bch"; + clocks = <&rawnand_0_lpcg 1>, + <&rawnand_0_lpcg 2>, + <&rawnand_0_lpcg 0>, + <&rawnand_0_lpcg 3>; + clock-names = "gpmi_clk", "gpmi_apb_clk", + "bch_clk", "bch_apb_clk"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + power-domains = <&pd IMX_SC_R_NAND>; + assigned-clocks = <&clk IMX_SC_R_NAND IMX_SC_PM_CLK_MST_BUS>; + assigned-clock-rates = <50000000>; + status = "disabled"; + }; }; |