diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdm845.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/qcom/sdm845.dtsi | 300 |
1 files changed, 150 insertions, 150 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index f39e291fb1c6..e8daa73e1551 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -352,14 +352,14 @@ }; soc: soc { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0 0xffffffff>; compatible = "simple-bus"; gcc: clock-controller@100000 { compatible = "qcom,gcc-sdm845"; - reg = <0x100000 0x1f0000>; + reg = <0 0x00100000 0 0x1f0000>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -367,7 +367,7 @@ qfprom@784000 { compatible = "qcom,qfprom"; - reg = <0x784000 0x8ff>; + reg = <0 0x00784000 0 0x8ff>; #address-cells = <1>; #size-cells = <1>; @@ -384,25 +384,25 @@ rng: rng@793000 { compatible = "qcom,prng-ee"; - reg = <0x00793000 0x1000>; + reg = <0 0x00793000 0 0x1000>; clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; - reg = <0x8c0000 0x6000>; + reg = <0 0x008c0000 0 0x6000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; status = "disabled"; i2c0: i2c@880000 { compatible = "qcom,geni-i2c"; - reg = <0x880000 0x4000>; + reg = <0 0x00880000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; @@ -415,7 +415,7 @@ spi0: spi@880000 { compatible = "qcom,geni-spi"; - reg = <0x880000 0x4000>; + reg = <0 0x00880000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; @@ -428,7 +428,7 @@ uart0: serial@880000 { compatible = "qcom,geni-uart"; - reg = <0x880000 0x4000>; + reg = <0 0x00880000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; @@ -439,7 +439,7 @@ i2c1: i2c@884000 { compatible = "qcom,geni-i2c"; - reg = <0x884000 0x4000>; + reg = <0 0x00884000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; pinctrl-names = "default"; @@ -452,7 +452,7 @@ spi1: spi@884000 { compatible = "qcom,geni-spi"; - reg = <0x884000 0x4000>; + reg = <0 0x00884000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; pinctrl-names = "default"; @@ -465,7 +465,7 @@ uart1: serial@884000 { compatible = "qcom,geni-uart"; - reg = <0x884000 0x4000>; + reg = <0 0x00884000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; pinctrl-names = "default"; @@ -476,7 +476,7 @@ i2c2: i2c@888000 { compatible = "qcom,geni-i2c"; - reg = <0x888000 0x4000>; + reg = <0 0x00888000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; pinctrl-names = "default"; @@ -489,7 +489,7 @@ spi2: spi@888000 { compatible = "qcom,geni-spi"; - reg = <0x888000 0x4000>; + reg = <0 0x00888000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; pinctrl-names = "default"; @@ -502,7 +502,7 @@ uart2: serial@888000 { compatible = "qcom,geni-uart"; - reg = <0x888000 0x4000>; + reg = <0 0x00888000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; pinctrl-names = "default"; @@ -513,7 +513,7 @@ i2c3: i2c@88c000 { compatible = "qcom,geni-i2c"; - reg = <0x88c000 0x4000>; + reg = <0 0x0088c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; @@ -526,7 +526,7 @@ spi3: spi@88c000 { compatible = "qcom,geni-spi"; - reg = <0x88c000 0x4000>; + reg = <0 0x0088c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; @@ -539,7 +539,7 @@ uart3: serial@88c000 { compatible = "qcom,geni-uart"; - reg = <0x88c000 0x4000>; + reg = <0 0x0088c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; @@ -550,7 +550,7 @@ i2c4: i2c@890000 { compatible = "qcom,geni-i2c"; - reg = <0x890000 0x4000>; + reg = <0 0x00890000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; pinctrl-names = "default"; @@ -563,7 +563,7 @@ spi4: spi@890000 { compatible = "qcom,geni-spi"; - reg = <0x890000 0x4000>; + reg = <0 0x00890000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; pinctrl-names = "default"; @@ -576,7 +576,7 @@ uart4: serial@890000 { compatible = "qcom,geni-uart"; - reg = <0x890000 0x4000>; + reg = <0 0x00890000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; pinctrl-names = "default"; @@ -587,7 +587,7 @@ i2c5: i2c@894000 { compatible = "qcom,geni-i2c"; - reg = <0x894000 0x4000>; + reg = <0 0x00894000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; @@ -600,7 +600,7 @@ spi5: spi@894000 { compatible = "qcom,geni-spi"; - reg = <0x894000 0x4000>; + reg = <0 0x00894000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; @@ -613,7 +613,7 @@ uart5: serial@894000 { compatible = "qcom,geni-uart"; - reg = <0x894000 0x4000>; + reg = <0 0x00894000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; @@ -624,7 +624,7 @@ i2c6: i2c@898000 { compatible = "qcom,geni-i2c"; - reg = <0x898000 0x4000>; + reg = <0 0x00898000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; pinctrl-names = "default"; @@ -637,7 +637,7 @@ spi6: spi@898000 { compatible = "qcom,geni-spi"; - reg = <0x898000 0x4000>; + reg = <0 0x00898000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; pinctrl-names = "default"; @@ -650,7 +650,7 @@ uart6: serial@898000 { compatible = "qcom,geni-uart"; - reg = <0x898000 0x4000>; + reg = <0 0x00898000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; pinctrl-names = "default"; @@ -661,7 +661,7 @@ i2c7: i2c@89c000 { compatible = "qcom,geni-i2c"; - reg = <0x89c000 0x4000>; + reg = <0 0x0089c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; pinctrl-names = "default"; @@ -674,7 +674,7 @@ spi7: spi@89c000 { compatible = "qcom,geni-spi"; - reg = <0x89c000 0x4000>; + reg = <0 0x0089c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; pinctrl-names = "default"; @@ -687,7 +687,7 @@ uart7: serial@89c000 { compatible = "qcom,geni-uart"; - reg = <0x89c000 0x4000>; + reg = <0 0x0089c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; pinctrl-names = "default"; @@ -699,18 +699,18 @@ qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; - reg = <0xac0000 0x6000>; + reg = <0 0x00ac0000 0 0x6000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; status = "disabled"; i2c8: i2c@a80000 { compatible = "qcom,geni-i2c"; - reg = <0xa80000 0x4000>; + reg = <0 0x00a80000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; pinctrl-names = "default"; @@ -723,7 +723,7 @@ spi8: spi@a80000 { compatible = "qcom,geni-spi"; - reg = <0xa80000 0x4000>; + reg = <0 0x00a80000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; pinctrl-names = "default"; @@ -736,7 +736,7 @@ uart8: serial@a80000 { compatible = "qcom,geni-uart"; - reg = <0xa80000 0x4000>; + reg = <0 0x00a80000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; pinctrl-names = "default"; @@ -747,7 +747,7 @@ i2c9: i2c@a84000 { compatible = "qcom,geni-i2c"; - reg = <0xa84000 0x4000>; + reg = <0 0x00a84000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; pinctrl-names = "default"; @@ -760,7 +760,7 @@ spi9: spi@a84000 { compatible = "qcom,geni-spi"; - reg = <0xa84000 0x4000>; + reg = <0 0x00a84000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; pinctrl-names = "default"; @@ -773,7 +773,7 @@ uart9: serial@a84000 { compatible = "qcom,geni-debug-uart"; - reg = <0xa84000 0x4000>; + reg = <0 0x00a84000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; pinctrl-names = "default"; @@ -784,7 +784,7 @@ i2c10: i2c@a88000 { compatible = "qcom,geni-i2c"; - reg = <0xa88000 0x4000>; + reg = <0 0x00a88000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; pinctrl-names = "default"; @@ -797,7 +797,7 @@ spi10: spi@a88000 { compatible = "qcom,geni-spi"; - reg = <0xa88000 0x4000>; + reg = <0 0x00a88000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; pinctrl-names = "default"; @@ -810,7 +810,7 @@ uart10: serial@a88000 { compatible = "qcom,geni-uart"; - reg = <0xa88000 0x4000>; + reg = <0 0x00a88000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; pinctrl-names = "default"; @@ -821,7 +821,7 @@ i2c11: i2c@a8c000 { compatible = "qcom,geni-i2c"; - reg = <0xa8c000 0x4000>; + reg = <0 0x00a8c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; pinctrl-names = "default"; @@ -834,7 +834,7 @@ spi11: spi@a8c000 { compatible = "qcom,geni-spi"; - reg = <0xa8c000 0x4000>; + reg = <0 0x00a8c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; pinctrl-names = "default"; @@ -847,7 +847,7 @@ uart11: serial@a8c000 { compatible = "qcom,geni-uart"; - reg = <0xa8c000 0x4000>; + reg = <0 0x00a8c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; pinctrl-names = "default"; @@ -858,7 +858,7 @@ i2c12: i2c@a90000 { compatible = "qcom,geni-i2c"; - reg = <0xa90000 0x4000>; + reg = <0 0x00a90000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; pinctrl-names = "default"; @@ -871,7 +871,7 @@ spi12: spi@a90000 { compatible = "qcom,geni-spi"; - reg = <0xa90000 0x4000>; + reg = <0 0x00a90000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; pinctrl-names = "default"; @@ -884,7 +884,7 @@ uart12: serial@a90000 { compatible = "qcom,geni-uart"; - reg = <0xa90000 0x4000>; + reg = <0 0x00a90000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; pinctrl-names = "default"; @@ -895,7 +895,7 @@ i2c13: i2c@a94000 { compatible = "qcom,geni-i2c"; - reg = <0xa94000 0x4000>; + reg = <0 0x00a94000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; pinctrl-names = "default"; @@ -908,7 +908,7 @@ spi13: spi@a94000 { compatible = "qcom,geni-spi"; - reg = <0xa94000 0x4000>; + reg = <0 0x00a94000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; pinctrl-names = "default"; @@ -921,7 +921,7 @@ uart13: serial@a94000 { compatible = "qcom,geni-uart"; - reg = <0xa94000 0x4000>; + reg = <0 0x00a94000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; pinctrl-names = "default"; @@ -932,7 +932,7 @@ i2c14: i2c@a98000 { compatible = "qcom,geni-i2c"; - reg = <0xa98000 0x4000>; + reg = <0 0x00a98000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; pinctrl-names = "default"; @@ -945,7 +945,7 @@ spi14: spi@a98000 { compatible = "qcom,geni-spi"; - reg = <0xa98000 0x4000>; + reg = <0 0x00a98000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; pinctrl-names = "default"; @@ -958,7 +958,7 @@ uart14: serial@a98000 { compatible = "qcom,geni-uart"; - reg = <0xa98000 0x4000>; + reg = <0 0x00a98000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; pinctrl-names = "default"; @@ -969,7 +969,7 @@ i2c15: i2c@a9c000 { compatible = "qcom,geni-i2c"; - reg = <0xa9c000 0x4000>; + reg = <0 0x00a9c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; pinctrl-names = "default"; @@ -982,7 +982,7 @@ spi15: spi@a9c000 { compatible = "qcom,geni-spi"; - reg = <0xa9c000 0x4000>; + reg = <0 0x00a9c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; pinctrl-names = "default"; @@ -995,7 +995,7 @@ uart15: serial@a9c000 { compatible = "qcom,geni-uart"; - reg = <0xa9c000 0x4000>; + reg = <0 0x00a9c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; pinctrl-names = "default"; @@ -1008,7 +1008,7 @@ ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; - reg = <0x1d84000 0x2500>; + reg = <0 0x01d84000 0 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; phys = <&ufs_mem_phy_lanes>; phy-names = "ufsphy"; @@ -1050,9 +1050,9 @@ ufs_mem_phy: phy@1d87000 { compatible = "qcom,sdm845-qmp-ufs-phy"; - reg = <0x1d87000 0x18c>; - #address-cells = <1>; - #size-cells = <1>; + reg = <0 0x01d87000 0 0x18c>; + #address-cells = <2>; + #size-cells = <2>; ranges; clock-names = "ref", "ref_aux"; @@ -1062,23 +1062,23 @@ status = "disabled"; ufs_mem_phy_lanes: lanes@1d87400 { - reg = <0x1d87400 0x108>, - <0x1d87600 0x1e0>, - <0x1d87c00 0x1dc>, - <0x1d87800 0x108>, - <0x1d87a00 0x1e0>; + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; #phy-cells = <0>; }; }; tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; - reg = <0x1f40000 0x40000>; + reg = <0 0x01f40000 0 0x40000>; }; tlmm: pinctrl@3400000 { compatible = "qcom,sdm845-pinctrl"; - reg = <0x03400000 0xc00000>; + reg = <0 0x03400000 0 0xc00000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; @@ -1475,7 +1475,7 @@ gpucc: clock-controller@5090000 { compatible = "qcom,sdm845-gpucc"; - reg = <0x05090000 0x9000>; + reg = <0 0x05090000 0 0x9000>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -1485,7 +1485,7 @@ sdhc_2: sdhci@8804000 { compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"; - reg = <0x8804000 0x1000>; + reg = <0 0x08804000 0 0x1000>; interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; @@ -1500,7 +1500,7 @@ qspi: spi@88df000 { compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; - reg = <0x88df000 0x600>; + reg = <0 0x088df000 0 0x600>; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -1512,7 +1512,7 @@ usb_1_hsphy: phy@88e2000 { compatible = "qcom,sdm845-qusb2-phy"; - reg = <0x88e2000 0x400>; + reg = <0 0x088e2000 0 0x400>; status = "disabled"; #phy-cells = <0>; @@ -1527,7 +1527,7 @@ usb_2_hsphy: phy@88e3000 { compatible = "qcom,sdm845-qusb2-phy"; - reg = <0x88e3000 0x400>; + reg = <0 0x088e3000 0 0x400>; status = "disabled"; #phy-cells = <0>; @@ -1542,13 +1542,13 @@ usb_1_qmpphy: phy@88e9000 { compatible = "qcom,sdm845-qmp-usb3-phy"; - reg = <0x88e9000 0x18c>, - <0x88e8000 0x10>; + reg = <0 0x088e9000 0 0x18c>, + <0 0x088e8000 0 0x10>; reg-names = "reg-base", "dp_com"; status = "disabled"; #clock-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, @@ -1562,12 +1562,12 @@ reset-names = "phy", "common"; usb_1_ssphy: lanes@88e9200 { - reg = <0x88e9200 0x128>, - <0x88e9400 0x200>, - <0x88e9c00 0x218>, - <0x88e9600 0x128>, - <0x88e9800 0x200>, - <0x88e9a00 0x100>; + reg = <0 0x088e9200 0 0x128>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x218>, + <0 0x088e9600 0 0x128>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -1577,11 +1577,11 @@ usb_2_qmpphy: phy@88eb000 { compatible = "qcom,sdm845-qmp-usb3-uni-phy"; - reg = <0x88eb000 0x18c>; + reg = <0 0x088eb000 0 0x18c>; status = "disabled"; #clock-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, @@ -1595,10 +1595,10 @@ reset-names = "phy", "common"; usb_2_ssphy: lane@88eb200 { - reg = <0x88eb200 0x128>, - <0x88eb400 0x1fc>, - <0x88eb800 0x218>, - <0x88eb600 0x70>; + reg = <0 0x088eb200 0 0x128>, + <0 0x088eb400 0 0x1fc>, + <0 0x088eb800 0 0x218>, + <0 0x088eb600 0 0x70>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -1608,10 +1608,10 @@ usb_1: usb@a6f8800 { compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; - reg = <0xa6f8800 0x400>; + reg = <0 0x0a6f8800 0 0x400>; status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, @@ -1639,7 +1639,7 @@ usb_1_dwc3: dwc3@a600000 { compatible = "snps,dwc3"; - reg = <0xa600000 0xcd00>; + reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; @@ -1650,10 +1650,10 @@ usb_2: usb@a8f8800 { compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; - reg = <0xa8f8800 0x400>; + reg = <0 0x0a8f8800 0 0x400>; status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, @@ -1681,7 +1681,7 @@ usb_2_dwc3: dwc3@a800000 { compatible = "snps,dwc3"; - reg = <0xa800000 0xcd00>; + reg = <0 0x0a800000 0 0xcd00>; interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; @@ -1692,7 +1692,7 @@ videocc: clock-controller@ab00000 { compatible = "qcom,sdm845-videocc"; - reg = <0x0ab00000 0x10000>; + reg = <0 0x0ab00000 0 0x10000>; #clock-cells = <1>; #power-domain-cells = <1>; #reset-cells = <1>; @@ -1700,7 +1700,7 @@ mdss: mdss@ae00000 { compatible = "qcom,sdm845-mdss"; - reg = <0x0ae00000 0x1000>; + reg = <0 0x0ae00000 0 0x1000>; reg-names = "mdss"; power-domains = <&dispcc MDSS_GDSC>; @@ -1722,14 +1722,14 @@ status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; mdss_mdp: mdp@ae01000 { compatible = "qcom,sdm845-dpu"; - reg = <0x0ae01000 0x8f000>, - <0x0aeb0000 0x2008>; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; reg-names = "mdp", "vbif"; clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, @@ -1770,7 +1770,7 @@ dsi0: dsi@ae94000 { compatible = "qcom,mdss-dsi-ctrl"; - reg = <0xae94000 0x400>; + reg = <0 0x0ae94000 0 0x400>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; @@ -1818,9 +1818,9 @@ dsi0_phy: dsi-phy@ae94400 { compatible = "qcom,dsi-phy-10nm"; - reg = <0xae94400 0x200>, - <0xae94600 0x280>, - <0xae94a00 0x1e0>; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94a00 0 0x1e0>; reg-names = "dsi_phy", "dsi_phy_lane", "dsi_pll"; @@ -1836,7 +1836,7 @@ dsi1: dsi@ae96000 { compatible = "qcom,mdss-dsi-ctrl"; - reg = <0xae96000 0x400>; + reg = <0 0x0ae96000 0 0x400>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; @@ -1884,9 +1884,9 @@ dsi1_phy: dsi-phy@ae96400 { compatible = "qcom,dsi-phy-10nm"; - reg = <0xae96400 0x200>, - <0xae96600 0x280>, - <0xae96a00 0x10e>; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96a00 0 0x10e>; reg-names = "dsi_phy", "dsi_phy_lane", "dsi_pll"; @@ -1903,7 +1903,7 @@ dispcc: clock-controller@af00000 { compatible = "qcom,sdm845-dispcc"; - reg = <0xaf00000 0x10000>; + reg = <0 0x0af00000 0 0x10000>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -1911,39 +1911,39 @@ pdc_reset: reset-controller@b2e0000 { compatible = "qcom,sdm845-pdc-global"; - reg = <0x0b2e0000 0x20000>; + reg = <0 0x0b2e0000 0 0x20000>; #reset-cells = <1>; }; tsens0: thermal-sensor@c263000 { compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; - reg = <0xc263000 0x1ff>, /* TM */ - <0xc222000 0x1ff>; /* SROT */ + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ #qcom,sensors = <13>; #thermal-sensor-cells = <1>; }; tsens1: thermal-sensor@c265000 { compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; - reg = <0xc265000 0x1ff>, /* TM */ - <0xc223000 0x1ff>; /* SROT */ + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ #qcom,sensors = <8>; #thermal-sensor-cells = <1>; }; aoss_reset: reset-controller@c2a0000 { compatible = "qcom,sdm845-aoss-cc"; - reg = <0xc2a0000 0x31000>; + reg = <0 0x0c2a0000 0 0x31000>; #reset-cells = <1>; }; spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0xc440000 0x1100>, - <0xc600000 0x2000000>, - <0xe600000 0x100000>, - <0xe700000 0xa0000>, - <0xc40a000 0x26000>; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; @@ -1958,7 +1958,7 @@ apps_smmu: iommu@15000000 { compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; - reg = <0x15000000 0x80000>; + reg = <0 0x15000000 0 0x80000>; #iommu-cells = <2>; #global-interrupts = <1>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, @@ -2038,16 +2038,16 @@ apss_shared: mailbox@17990000 { compatible = "qcom,sdm845-apss-shared"; - reg = <0x17990000 0x1000>; + reg = <0 0x17990000 0 0x1000>; #mbox-cells = <1>; }; apps_rsc: rsc@179c0000 { label = "apps_rsc"; compatible = "qcom,rpmh-rsc"; - reg = <0x179c0000 0x10000>, - <0x179d0000 0x10000>, - <0x179e0000 0x10000>; + reg = <0 0x179c0000 0 0x10000>, + <0 0x179d0000 0 0x10000>, + <0 0x179e0000 0 0x10000>; reg-names = "drv-0", "drv-1", "drv-2"; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, @@ -2117,85 +2117,85 @@ intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; #interrupt-cells = <3>; interrupt-controller; - reg = <0x17a00000 0x10000>, /* GICD */ - <0x17a60000 0x100000>; /* GICR * 8 */ + reg = <0 0x17a00000 0 0x10000>, /* GICD */ + <0 0x17a60000 0 0x100000>; /* GICR * 8 */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; gic-its@17a40000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; - reg = <0x17a40000 0x20000>; + reg = <0 0x17a40000 0 0x20000>; status = "disabled"; }; }; timer@17c90000 { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; compatible = "arm,armv7-timer-mem"; - reg = <0x17c90000 0x1000>; + reg = <0 0x17c90000 0 0x1000>; frame@17ca0000 { frame-number = <0>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17ca0000 0x1000>, - <0x17cb0000 0x1000>; + reg = <0 0x17ca0000 0 0x1000>, + <0 0x17cb0000 0 0x1000>; }; frame@17cc0000 { frame-number = <1>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17cc0000 0x1000>; + reg = <0 0x17cc0000 0 0x1000>; status = "disabled"; }; frame@17cd0000 { frame-number = <2>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17cd0000 0x1000>; + reg = <0 0x17cd0000 0 0x1000>; status = "disabled"; }; frame@17ce0000 { frame-number = <3>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17ce0000 0x1000>; + reg = <0 0x17ce0000 0 0x1000>; status = "disabled"; }; frame@17cf0000 { frame-number = <4>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17cf0000 0x1000>; + reg = <0 0x17cf0000 0 0x1000>; status = "disabled"; }; frame@17d00000 { frame-number = <5>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17d00000 0x1000>; + reg = <0 0x17d00000 0 0x1000>; status = "disabled"; }; frame@17d10000 { frame-number = <6>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x17d10000 0x1000>; + reg = <0 0x17d10000 0 0x1000>; status = "disabled"; }; }; cpufreq_hw: cpufreq@17d43000 { compatible = "qcom,cpufreq-hw"; - reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>; + reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1"; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; @@ -2207,7 +2207,7 @@ wifi: wifi@18800000 { compatible = "qcom,wcn3990-wifi"; status = "disabled"; - reg = <0x18800000 0x800000>; + reg = <0 0x18800000 0 0x800000>; reg-names = "membase"; memory-region = <&wlan_msa_mem>; interrupts = |