diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi | 845 |
1 files changed, 650 insertions, 195 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi b/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi index e4793461fa07..f1400cbd3e6b 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi @@ -7,8 +7,10 @@ * https://www.toradex.com/computer-on-modules/aquila-arm-family/ti-am69 */ -#include <dt-bindings/net/ti-dp83867.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/usb/pd.h> #include "k3-j784s4.dtsi" / { @@ -21,7 +23,8 @@ can1 = &mcu_mcan0; can2 = &main_mcan13; can3 = &mcu_mcan1; - ethernet1 = &mcu_cpsw_port1; + ethernet0 = &mcu_cpsw_port1; + ethernet1 = &main_cpsw0_port2; i2c0 = &wkup_i2c0; i2c1 = &mcu_i2c0; i2c2 = &mcu_i2c1; @@ -36,6 +39,52 @@ serial1 = &wkup_uart0; serial2 = &main_uart8; serial3 = &mcu_uart0; + usb0 = &usb0; + }; + + aquila_key_power: gpio-key-power { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwr_btn_int>; + status = "disabled"; + + key-power { + /* Aquila CTRL_PWR_BTN_MICO# (AQUILA B93) */ + gpios = <&wkup_gpio0 36 GPIO_ACTIVE_LOW>; + label = "Power Button"; + linux,code = <KEY_POWER>; + }; + }; + + aquila_key_wake: gpio-key-wakeup { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_wake1_mico>; + status = "disabled"; + + key-wakeup { + /* Aquila CTRL_WAKE1_MICO# (AQUILA D6) */ + gpios = <&wkup_gpio0 49 GPIO_ACTIVE_LOW>; + label = "Wake Up"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + /* Aquila CTRL_RESET_MICO# (AQUILA B92) */ + gpio-restart { + compatible = "gpio-restart"; + /* COLD_RESET_REQ */ + gpios = <&som_gpio_expander 1 GPIO_ACTIVE_HIGH>; + priority = <128>; + }; + + /* PWR_DOWN_REQ */ + gpio-poweroff { + compatible = "gpio-poweroff"; + /* PWR_DOWN_REQ */ + gpios = <&som_gpio_expander 2 GPIO_ACTIVE_HIGH>; + timeout-ms = <3000>; }; memory@80000000 { @@ -208,13 +257,72 @@ }; }; + /* Module Power Supply (VCC) */ + reg_vin: regulator-vin { + compatible = "regulator-fixed"; + regulator-name = "+V_IN"; + }; + + /* Enabled by EN_3V3_VIO (PMIC_GPIO_9) */ + reg_3v3_vio: regulator-3v3-vio { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_VIO"; + vin-supply = <®_vin>; + }; + + /* Enabled by +V1.8_MCU_IO */ + reg_1v0_eth: regulator-1v0-eth { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <1000000>; + regulator-name = "+V1.0_VIO"; + vin-supply = <®_3v3_vio>; + }; + + /* Enabled by +V1.8_MCU_IO */ + reg_2v5_eth: regulator-2v5-eth { + compatible = "regulator-fixed"; + regulator-max-microvolt = <2500000>; + regulator-min-microvolt = <2500000>; + regulator-name = "+V2.5_VIO"; + vin-supply = <®_3v3_vio>; + }; + + /* Enabled by EN_3V3_VIO (PMIC_GPIO_9) */ + reg_1v1_usb_bridge: regulator-1v1-vio { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "+V1.1_VIO"; + vin-supply = <®_vin>; + }; + + /* Enabled by EN_3V3_VIO (PMIC_GPIO_9) */ + reg_3v3_wifi: regulator-3v3-wifi { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_WIFI"; + vin-supply = <®_vin>; + }; + + reg_1v8_stby: regulator-1v8-stby { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_STBY"; + vin-supply = <®_vin>; + }; + /* Aquila SD_1_PWR_EN */ reg_sdhc1_vmmc: regulator-sdhci1 { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sd1_pwr_en>; enable-active-high; - /* Aquila SD_1_PWR_EN (AQUILA A5) */ + /* Aquila SD_1_PWR_EN (AQUILA A6) */ gpio = <&main_gpio0 52 GPIO_ACTIVE_HIGH>; off-on-delay-us = <100000>; regulator-max-microvolt = <3300000>; @@ -233,57 +341,80 @@ states = <1800000 0x0>, <3300000 0x1>; }; + + /* On-module USB_1_SS mux */ + usb0ss_mux: gpio-sbu-mux { + compatible = "ti,tmuxhs4212", "gpio-sbu-mux"; + /* USB_MUX_SEL */ + select-gpios = <&som_gpio_expander 0 GPIO_ACTIVE_HIGH>; + orientation-switch; + status = "disabled"; + }; }; &main_pmx0 { /* Aquila PWM_1 */ pinctrl_main_ehrpwm0_b: main-ehrpwm0b-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x064, PIN_OUTPUT, 9) /* (AF38) MCAN0_TX.EHRPWM0_B */ /* AQUILA B59 */ + J784S4_IOPAD(0x064, PIN_OUTPUT, 9) /* (AF38) MCAN0_TX.EHRPWM0_B */ /* AQUILA C25 */ >; }; /* Aquila PWM_2 */ pinctrl_main_ehrpwm3_a: main-ehrpwm3a-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x08c, PIN_OUTPUT, 9) /* (AE35) MCASP0_AXR7.EHRPWM3_A */ /* AQUILA B60 */ + J784S4_IOPAD(0x08c, PIN_OUTPUT, 9) /* (AE35) MCASP0_AXR7.EHRPWM3_A */ /* AQUILA C26 */ >; }; /* Aquila PWM_3_DSI */ pinctrl_main_ehrpwm5_a: main-ehrpwm5a-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x084, PIN_OUTPUT, 9) /* (AG38) MCASP0_AXR5.EHRPWM5_A */ /* AQUILA B45 */ + J784S4_IOPAD(0x084, PIN_OUTPUT, 9) /* (AG38) MCASP0_AXR5.EHRPWM5_A */ /* AQUILA B46 */ >; }; /* Aquila PWM_4_DP */ pinctrl_main_ehrpwm2_a: main-ehrpwm2a-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x040, PIN_INPUT, 9) /* (AF37) MCASP0_AXR0.EHRPWM2_A */ /* AQUILA B57 */ + J784S4_IOPAD(0x040, PIN_INPUT, 9) /* (AF37) MCASP0_AXR0.EHRPWM2_A */ /* AQUILA B58 */ + >; + }; + + /* Aquila PCIE_1_RESET# */ + pinctrl_pcie0_reset: main-gpio0-32-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x080, PIN_INPUT, 7) /* (AK34) MCASP0_AXR4.GPIO0_32 */ /* AQUILA C38 */ + >; + }; + + /* Aquila PCIE_2_RESET# */ + pinctrl_pcie1_reset: main-gpio0-32-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0a4, PIN_INPUT, 7) /* (AJ36) MCASP0_AXR13.GPIO0_41 */ /* AQUILA C35 */ >; }; - /* Aquila ETH_2_RGMII_INT# */ + /* Aquila ETH_2_xGMII_INT# */ pinctrl_eth2_int: main-gpio0-44-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x0b0, PIN_INPUT_PULLUP, 7) /* (AL33) MCASP1_AXR3.GPIO0_44 */ /* AQUILA B79 */ + J784S4_IOPAD(0x0b0, PIN_INPUT_PULLUP, 7) /* (AL33) MCASP1_AXR3.GPIO0_44 */ /* AQUILA B81 */ >; }; /* Aquila I2C_3_DSI1 */ pinctrl_main_i2c0: main-i2c0-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x0e0, PIN_INPUT, 0) /* (AN36) I2C0_SCL */ /* AQUILA B40 */ - J784S4_IOPAD(0x0e4, PIN_INPUT, 0) /* (AP37) I2C0_SDA */ /* AQUILA B39 */ + J784S4_IOPAD(0x0e0, PIN_INPUT, 0) /* (AN36) I2C0_SCL */ /* AQUILA B41 */ + J784S4_IOPAD(0x0e4, PIN_INPUT, 0) /* (AP37) I2C0_SDA */ /* AQUILA B40 */ >; }; /* Aquila I2C_4_CSI1 */ pinctrl_main_i2c1: main-i2c1-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x020, PIN_INPUT, 12) /* (AJ35) MCAN15_RX.I2C1_SCL */ /* AQUILA A14 */ - J784S4_IOPAD(0x024, PIN_INPUT, 12) /* (AH34) MCAN16_TX.I2C1_SDA */ /* AQUILA A13 */ + J784S4_IOPAD(0x020, PIN_INPUT, 12) /* (AJ35) MCAN15_RX.I2C1_SCL */ /* AQUILA A13 */ + J784S4_IOPAD(0x024, PIN_INPUT, 12) /* (AH34) MCAN16_TX.I2C1_SDA */ /* AQUILA A12 */ >; }; @@ -298,100 +429,136 @@ /* Aquila I2C_6 */ pinctrl_main_i2c5: main-i2c5-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x01c, PIN_INPUT, 8) /* (AG34) MCAN15_TX.I2C5_SCL */ /* AQUILA D11 */ - J784S4_IOPAD(0x018, PIN_INPUT, 8) /* (AK36) MCAN14_RX.I2C5_SDA */ /* AQUILA D10 */ + J784S4_IOPAD(0x01c, PIN_INPUT, 8) /* (AG34) MCAN15_TX.I2C5_SCL */ /* AQUILA C19 */ + J784S4_IOPAD(0x018, PIN_INPUT, 8) /* (AK36) MCAN14_RX.I2C5_SDA */ /* AQUILA C18 */ >; }; /* Aquila CAN_1 */ pinctrl_main_mcan10: main-mcan10-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x0b8, PIN_INPUT, 0) /* (AC34) MCASP1_ACLKX.MCAN10_RX */ /* AQUILA B48 */ - J784S4_IOPAD(0x0b4, PIN_OUTPUT, 0) /* (AL34) MCASP1_AXR4.MCAN10_TX */ /* AQUILA B47 */ + J784S4_IOPAD(0x0b8, PIN_INPUT, 0) /* (AC34) MCASP1_ACLKX.MCAN10_RX */ /* AQUILA B49 */ + J784S4_IOPAD(0x0b4, PIN_OUTPUT, 0) /* (AL34) MCASP1_AXR4.MCAN10_TX */ /* AQUILA B48 */ >; }; /* Aquila CAN_3 */ pinctrl_main_mcan13: main-mcan13-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x010, PIN_INPUT, 0) /* (AH33) MCAN13_RX */ /* AQUILA B53 */ - J784S4_IOPAD(0x00c, PIN_OUTPUT, 0) /* (AF33) MCAN13_TX */ /* AQUILA B52 */ + J784S4_IOPAD(0x010, PIN_INPUT, 0) /* (AH33) MCAN13_RX */ /* AQUILA B54 */ + J784S4_IOPAD(0x00c, PIN_OUTPUT, 0) /* (AF33) MCAN13_TX */ /* AQUILA B53 */ + >; + }; + + /* Aquila ETH_2 MDIO */ + pinctrl_main_mdio0: main-mdio0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x0c0, PIN_OUTPUT, 6) /* (AD38) MCASP1_AXR0.MDIO0_MDC */ /* AQUILA B90 */ + J784S4_IOPAD(0x0bc, PIN_INPUT, 6) /* (AD33) MCASP1_AFSX.MDIO0_MDIO */ /* AQUILA B89 */ >; }; /* Aquila SD_1 */ pinctrl_main_mmc1: main-mmc1-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */ /* AQUILA A6 */ - J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */ /* AQUILA A4 */ - J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */ /* AQUILA A8 */ - J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */ /* AQUILA A9 */ - J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */ /* AQUILA A1 */ - J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */ /* AQUILA A3 */ + J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */ /* AQUILA A5 */ + J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */ /* AQUILA A7 */ + J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */ /* AQUILA A3 */ + J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */ /* AQUILA A2 */ + J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */ /* AQUILA A10 */ + J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */ /* AQUILA A8 */ >; }; /* Aquila SPI_2 */ pinctrl_main_spi0: main-spi0-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AN38) SPI0_CLK */ /* AQUILA D17 */ - J784S4_IOPAD(0x0d8, PIN_INPUT, 0) /* (AM35) SPI0_D0 */ /* AQUILA D18 */ - J784S4_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (AM36) SPI0_D1 */ /* AQUILA D20 */ + J784S4_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AN38) SPI0_CLK */ /* AQUILA D14 */ + J784S4_IOPAD(0x0d8, PIN_INPUT, 0) /* (AM35) SPI0_D0 */ /* AQUILA D15 */ + J784S4_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (AM36) SPI0_D1 */ /* AQUILA D17 */ >; }; /* Aquila SPI_2 CS */ pinctrl_main_spi0_cs0: main-spi0-cs0-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (AM37) SPI0_CS0 */ /* AQUILA D19 */ + J784S4_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (AM37) SPI0_CS0 */ /* AQUILA D16 */ >; }; /* Aquila SPI_1 */ pinctrl_main_spi2: main-spi2-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x0a0, PIN_OUTPUT, 10) /* (AD34) MCASP0_AXR12.SPI2_CLK */ /* AQUILA D15 */ - J784S4_IOPAD(0x0a8, PIN_INPUT, 10) /* (AF34) MCASP0_AXR14.SPI2_D0 */ /* AQUILA D13 */ - J784S4_IOPAD(0x0ac, PIN_OUTPUT, 10) /* (AE34) MCASP0_AXR15.SPI2_D1 */ /* AQUILA D14 */ + J784S4_IOPAD(0x0a0, PIN_OUTPUT, 10) /* (AD34) MCASP0_AXR12.SPI2_CLK */ /* AQUILA D12 */ + J784S4_IOPAD(0x0a8, PIN_INPUT, 10) /* (AF34) MCASP0_AXR14.SPI2_D0 */ /* AQUILA D10 */ + J784S4_IOPAD(0x0ac, PIN_OUTPUT, 10) /* (AE34) MCASP0_AXR15.SPI2_D1 */ /* AQUILA D11 */ >; }; /* Aquila SPI_1 CS */ pinctrl_main_spi2_cs0: main-spi2-cs0-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x09c, PIN_OUTPUT, 10) /* (AF35) MCASP0_AXR11.SPI2_CS1 */ /* AQUILA D12 */ + J784S4_IOPAD(0x09c, PIN_OUTPUT, 10) /* (AF35) MCASP0_AXR11.SPI2_CS1 */ /* AQUILA D9 */ >; }; /* Aquila UART_1 */ pinctrl_main_uart1: main-uart1-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x05c, PIN_INPUT, 11) /* (AC36) MCASP2_AXR0.UART1_CTSn */ /* AQUILA B37 */ - J784S4_IOPAD(0x060, PIN_OUTPUT, 11) /* (AE36) MCASP2_AXR1.UART1_RTSn */ /* AQUILA B36 */ - J784S4_IOPAD(0x054, PIN_INPUT, 11) /* (AD37) MCASP2_ACLKX.UART1_RXD */ /* AQUILA B34 */ - J784S4_IOPAD(0x058, PIN_OUTPUT, 11) /* (AE37) MCASP2_AFSX.UART1_TXD */ /* AQUILA B35 */ + J784S4_IOPAD(0x05c, PIN_INPUT, 11) /* (AC36) MCASP2_AXR0.UART1_CTSn */ /* AQUILA B36 */ + J784S4_IOPAD(0x060, PIN_OUTPUT, 11) /* (AE36) MCASP2_AXR1.UART1_RTSn */ /* AQUILA B38 */ + J784S4_IOPAD(0x054, PIN_INPUT, 11) /* (AD37) MCASP2_ACLKX.UART1_RXD */ /* AQUILA B35 */ + J784S4_IOPAD(0x058, PIN_OUTPUT, 11) /* (AE37) MCASP2_AFSX.UART1_TXD */ /* AQUILA B37 */ >; }; /* Aquila UART_3, used as the Linux console */ pinctrl_main_uart8: main-uart8-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x038, PIN_INPUT, 11) /* (AK35) MCASP0_ACLKX.UART8_RXD */ /* AQUILA D22 */ - J784S4_IOPAD(0x03c, PIN_OUTPUT, 11) /* (AK38) MCASP0_AFSX.UART8_TXD */ /* AQUILA D23 */ + J784S4_IOPAD(0x038, PIN_INPUT, 11) /* (AK35) MCASP0_ACLKX.UART8_RXD */ /* AQUILA D19 */ + J784S4_IOPAD(0x03c, PIN_OUTPUT, 11) /* (AK38) MCASP0_AFSX.UART8_TXD */ /* AQUILA D20 */ + >; + }; + + /* Aquila USB_1_EN */ + pinctrl_main_usb0ss: main-usb0ss-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x02c, PIN_INPUT, 14) /* (AL32) GPIO0_11.USB0_DRVVBUS */ /* AQUILA B77 */ + >; + }; + + /* PMIC_INT# */ + pinctrl_pmic_int: main-gpio0-0-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x000, PIN_INPUT, 7) /* (AN35) EXTINTn.GPIO0_0 */ + >; + }; + + /* Aquila USB_1_OC# */ + pinctrl_usb1_oc: main-gpio0-10-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x028, PIN_INPUT, 7) /* (AE33) MCAN16_RX.GPIO0_10 */ /* AQUILA B75 */ + >; + }; + + /* Aquila USB_1_INT# */ + pinctrl_usb1_int: main-gpio0-28-default-pins { + pinctrl-single,pins = < + J784S4_IOPAD(0x070, PIN_INPUT, 7) /* (AH38) MCAN1_RX.GPIO0_28 */ /* AQUILA B74 */ >; }; /* Aquila SD_1_CD# as GPIO */ pinctrl_sd1_cd_gpio: main-gpio0-58-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x0e8, PIN_INPUT_PULLUP, 7) /* (AR38) TIMER_IO0.GPIO0_58 */ /* AQUILA A10 */ + J784S4_IOPAD(0x0e8, PIN_INPUT_PULLUP, 7) /* (AR38) TIMER_IO0.GPIO0_58 */ /* AQUILA A1 */ >; }; /* Aquila SD_1_PWR_EN */ pinctrl_sd1_pwr_en: main-gpio0-52-default-pins { pinctrl-single,pins = < - J784S4_IOPAD(0x0d0, PIN_INPUT, 7) /* (AP38) SPI0_CS1.GPIO0_52 */ /* AQUILA A5 */ + J784S4_IOPAD(0x0d0, PIN_INPUT, 7) /* (AP38) SPI0_CS1.GPIO0_52 */ /* AQUILA A6 */ >; }; }; @@ -400,126 +567,126 @@ /* Aquila QSPI_1 (4-bit) */ pinctrl_mcu_ospi0_4bit: mcu-ospi0-4bit-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */ /* AQUILA C20 */ - J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */ /* AQUILA C22 */ - J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */ /* AQUILA C21 */ - J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */ /* AQUILA C15 */ - J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */ /* AQUILA C16 */ - J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */ /* AQUILA C18 */ + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */ /* AQUILA B65 */ + J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */ /* AQUILA B68 */ + J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */ /* AQUILA B67 */ + J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */ /* AQUILA B61 */ + J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */ /* AQUILA B60 */ + J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */ /* AQUILA B63 */ >; }; /* Aquila QSPI_1 (8-bit) */ pinctrl_mcu_ospi0_8bit: mcu-ospi0-8bit-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */ /* AQUILA C20 */ - J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */ /* AQUILA C22 */ - J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */ /* AQUILA C21 */ - J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */ /* AQUILA C15 */ - J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */ /* AQUILA C16 */ - J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */ /* AQUILA C25 */ - J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */ /* AQUILA C23 */ - J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */ /* AQUILA C27 */ - J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */ /* AQUILA C28 */ - J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */ /* AQUILA C18 */ + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */ /* AQUILA B65 */ + J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */ /* AQUILA B68 */ + J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */ /* AQUILA B67 */ + J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */ /* AQUILA B61 */ + J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */ /* AQUILA B60 */ + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */ /* AQUILA B70 */ + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */ /* AQUILA B71 */ + J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */ /* AQUILA B72 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */ /* AQUILA B73 */ + J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */ /* AQUILA B63 */ >; }; /* Aquila QSPI_1_CS1# */ pinctrl_mcu_ospi0_cs0: mcu-ospi0-cs0-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */ /* AQUILA C23 */ + J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */ /* AQUILA B66 */ >; }; /* Aquila QSPI_1_CS2# */ pinctrl_mcu_ospi0_cs1: mcu-ospi0-cs1-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x030, PIN_OUTPUT, 0) /* (A33) MCU_OSPI0_CSn1 */ /* AQUILA C17 */ + J784S4_WKUP_IOPAD(0x030, PIN_OUTPUT, 0) /* (A33) MCU_OSPI0_CSn1 */ /* AQUILA B62 */ >; }; /* Aquila QSPI_1_SCK as GPIO */ pinctrl_wkup_gpio16: wkup-gpio16-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (E32) MCU_OSPI0_CLK.WKUP_GPIO0_16 */ /* AQUILA C20 */ + J784S4_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (E32) MCU_OSPI0_CLK.WKUP_GPIO0_16 */ /* AQUILA B65 */ >; }; /* Aquila QSPI_1_DQS as GPIO */ pinctrl_wkup_gpio18: wkup-gpio18-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 7) /* (C34) MCU_OSPI0_DQS.WKUP_GPIO0_18 */ /* AQUILA C18 */ + J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 7) /* (C34) MCU_OSPI0_DQS.WKUP_GPIO0_18 */ /* AQUILA B63 */ >; }; /* Aquila QSPI_1_IO0 as GPIO */ pinctrl_wkup_gpio19: wkup-gpio19-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 7) /* (B33) MCU_OSPI0_D0.WKUP_GPIO0_19 */ /* AQUILA C22 */ + J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 7) /* (B33) MCU_OSPI0_D0.WKUP_GPIO0_19 */ /* AQUILA B68 */ >; }; /* Aquila QSPI_1_IO1 as GPIO */ pinctrl_wkup_gpio20: wkup-gpio20-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 7) /* (B32) MCU_OSPI0_D1.WKUP_GPIO0_20 */ /* AQUILA C21 */ + J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 7) /* (B32) MCU_OSPI0_D1.WKUP_GPIO0_20 */ /* AQUILA B67 */ >; }; /* Aquila QSPI_1_IO2 as GPIO */ pinctrl_wkup_gpio21: wkup-gpio21-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 7) /* (C33) MCU_OSPI0_D2.WKUP_GPIO0_21 */ /* AQUILA C15 */ + J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 7) /* (C33) MCU_OSPI0_D2.WKUP_GPIO0_21 */ /* AQUILA B61 */ >; }; /* Aquila QSPI_1_IO3 as GPIO */ pinctrl_wkup_gpio22: wkup-gpio22-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 7) /* (C35) MCU_OSPI0_D3.WKUP_GPIO0_22 */ /* AQUILA C16 */ + J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 7) /* (C35) MCU_OSPI0_D3.WKUP_GPIO0_22 */ /* AQUILA B60 */ >; }; /* Aquila QSPI_1_IO4 as GPIO */ pinctrl_wkup_gpio23: wkup-gpio23-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 7) /* (D33) MCU_OSPI0_D4.WKUP_GPIO0_23 */ /* AQUILA C25 */ + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 7) /* (D33) MCU_OSPI0_D4.WKUP_GPIO0_23 */ /* AQUILA B70 */ >; }; /* Aquila QSPI_1_IO5 as GPIO */ pinctrl_wkup_gpio24: wkup-gpio24-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 7) /* (D34) MCU_OSPI0_D5.WKUP_GPIO0_24 */ /* AQUILA C26 */ + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 7) /* (D34) MCU_OSPI0_D5.WKUP_GPIO0_24 */ /* AQUILA B71 */ >; }; /* Aquila QSPI_1_IO6 as GPIO */ pinctrl_wkup_gpio25: wkup-gpio25-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 7) /* (E34) MCU_OSPI0_D6.WKUP_GPIO0_25 */ /* AQUILA C27 */ + J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 7) /* (E34) MCU_OSPI0_D6.WKUP_GPIO0_25 */ /* AQUILA B72 */ >; }; /* Aquila QSPI_1_IO7 as GPIO */ pinctrl_wkup_gpio26: wkup-gpio26-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7) /* (E33) MCU_OSPI0_D7.WKUP_GPIO0_26 */ /* AQUILA C28 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7) /* (E33) MCU_OSPI0_D7.WKUP_GPIO0_26 */ /* AQUILA B73 */ >; }; /* Aquila QSPI_1_CS#1 as GPIO */ pinctrl_wkup_gpio27: wkup-gpio27-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 7) /* (A32) MCU_OSPI0_CSn0.WKUP_GPIO0_27 */ /* AQUILA C23 */ + J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 7) /* (A32) MCU_OSPI0_CSn0.WKUP_GPIO0_27 */ /* AQUILA B66 */ >; }; /* Aquila QSPI_1_CS#2 as GPIO */ pinctrl_wkup_gpio28: wkup-gpio28-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 7) /* (A33) MCU_OSPI0_CSn1.WKUP_GPIO0_28 */ /* AQUILA C17 */ + J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 7) /* (A33) MCU_OSPI0_CSn1.WKUP_GPIO0_28 */ /* AQUILA B62 */ >; }; }; @@ -528,7 +695,7 @@ /* Aquila UART_4 (RXD) */ pinctrl_mcu_uart0_rx: mcu-uart0-rx-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 4) /* (D31) MCU_OSPI1_D1.MCU_UART0_RXD */ /* AQUILA D24 */ + J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 4) /* (D31) MCU_OSPI1_D1.MCU_UART0_RXD */ /* AQUILA D21 */ >; }; @@ -538,6 +705,13 @@ J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 7) /* (E35) MCU_OSPI1_D0.WKUP_GPIO0_34 */ >; }; + + /* Aquila CTRL_PWR_BTN_MICO# (PWR_BTN_INT#) */ + pinctrl_pwr_btn_int: wkup-gpio36-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT_PULLUP, 7) /* (G31) MCU_OSPI1_D2.WKUP_GPIO0_36 */ /* AQUILA B92 */ + >; + }; }; &wkup_pmx2 { @@ -554,58 +728,58 @@ /* Aquila I2C_1 */ pinctrl_mcu_i2c0: mcu-i2c0-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x0a0, PIN_INPUT, 0) /* (M35) MCU_I2C0_SCL */ /* AQUILA B63 */ - J784S4_WKUP_IOPAD(0x0a4, PIN_INPUT, 0) /* (G34) MCU_I2C0_SDA */ /* AQUILA B62 */ + J784S4_WKUP_IOPAD(0x0a0, PIN_INPUT, 0) /* (M35) MCU_I2C0_SCL */ /* AQUILA D8 */ + J784S4_WKUP_IOPAD(0x0a4, PIN_INPUT, 0) /* (G34) MCU_I2C0_SDA */ /* AQUILA D7 */ >; }; /* Aquila I2C_2 */ pinctrl_mcu_i2c1: mcu-i2c1-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x078, PIN_INPUT, 0) /* (L35) WKUP_GPIO0_8.MCU_I2C1_SCL */ /* AQUILA D9 */ - J784S4_WKUP_IOPAD(0x07c, PIN_INPUT, 0) /* (L34) WKUP_GPIO0_9.MCU_I2C1_SDA */ /* AQUILA D8 */ + J784S4_WKUP_IOPAD(0x078, PIN_INPUT, 0) /* (L35) WKUP_GPIO0_8.MCU_I2C1_SCL */ /* AQUILA C17 */ + J784S4_WKUP_IOPAD(0x07c, PIN_INPUT, 0) /* (L34) WKUP_GPIO0_9.MCU_I2C1_SDA */ /* AQUILA C16 */ >; }; /* Aquila CAN_2 */ pinctrl_mcu_mcan0: mcu-mcan0-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (F38) MCU_MCAN0_RX */ /* AQUILA B50 */ - J784S4_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (K33) MCU_MCAN0_TX */ /* AQUILA B49 */ + J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (F38) MCU_MCAN0_RX */ /* AQUILA B51 */ + J784S4_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (K33) MCU_MCAN0_TX */ /* AQUILA B50 */ >; }; /* Aquila CAN_4 */ pinctrl_mcu_mcan1: mcu-mcan1-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (K36) WKUP_GPIO0_5.MCU_MCAN1_RX */ /* AQUILA B55 */ - J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (H35) WKUP_GPIO0_4.MCU_MCAN1_TX */ /* AQUILA B54 */ + J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (K36) WKUP_GPIO0_5.MCU_MCAN1_RX */ /* AQUILA B56 */ + J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (H35) WKUP_GPIO0_4.MCU_MCAN1_TX */ /* AQUILA B55 */ >; }; - /* Aquila ETH_2 MDIO */ + /* On-module ETH_1 MDIO */ pinctrl_mcu_mdio: mcu-mdio-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ /* AQUILA B72 */ - J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ /* AQUILA B71 */ + J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ + J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ >; }; - /* Aquila ETH_2 RGMII */ + /* On-module ETH_1 RGMII */ pinctrl_mcu_rgmii1: mcu-rgmii1-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */ /* AQUILA B77 */ - J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */ /* AQUILA B78 */ - J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */ /* AQUILA B80 */ - J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */ /* AQUILA B81 */ - J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */ /* AQUILA B74 */ - J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */ /* AQUILA B75 */ - J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */ /* AQUILA B90 */ - J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */ /* AQUILA B89 */ - J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */ /* AQUILA B87 */ - J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */ /* AQUILA B86 */ - J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ /* AQUILA B83 */ - J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ /* AQUILA B84 */ + J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */ + J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */ + J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */ + J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */ + J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */ + J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */ + J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */ + J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */ + J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */ + J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ + J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ >; }; @@ -622,7 +796,7 @@ /* Aquila UART_4 (TX) */ pinctrl_mcu_uart0_tx: mcu-uart0-tx-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x080, PIN_OUTPUT, 2) /* (L33) WKUP_GPIO0_10.MCU_UART0_TXD */ /* AQUILA D25 */ + J784S4_WKUP_IOPAD(0x080, PIN_OUTPUT, 2) /* (L33) WKUP_GPIO0_10.MCU_UART0_TXD */ /* AQUILA D22 */ >; }; @@ -644,10 +818,19 @@ /* Aquila UART_2 */ pinctrl_wkup_uart0: wkup-uart0-default-pins { pinctrl-single,pins = < - J784S4_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */ /* AQUILA L37 */ - J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */ /* AQUILA L36 */ - J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ /* AQUILA K35 */ - J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */ /* AQUILA K34 */ + J784S4_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */ /* AQUILA B32 */ + J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */ /* AQUILA B34 */ + J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ /* AQUILA B31 */ + J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */ /* AQUILA B33 */ + >; + }; +}; + +&wkup_pmx3 { + /* Aquila CTRL_WAKE1_MICO# */ + pinctrl_ctrl_wake1_mico: wkup-gpio0-49-default-pins { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x000, PIN_INPUT_PULLUP, 7) /* (M33) WKUP_GPIO0_49 */ /* AQUILA D6 */ >; }; }; @@ -680,11 +863,33 @@ status = "okay"; }; -/* Aquila ETH_2_MDIO */ +/* On-module ETH_1 MDIO */ &davinci_mdio { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mcu_mdio>; status = "disabled"; + + mcu_phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <79 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; + +/* Aquila ETH_2 MDIO */ +&main_cpsw0_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_mdio0>; +}; + +/* Aquila ETH_2 SGMII PHY */ +&main_cpsw0_port2 { + phy-mode = "sgmii"; + phys = <&cpsw0_phy_gmii_sel 2>, <&serdes1_sgmii_link>; + phy-names = "mac", "serdes"; + status = "disabled"; }; /* Aquila PWM_1 */ @@ -720,69 +925,69 @@ "", /* 0 */ "AQUILA_B17", "AQUILA_B18", - "AQUILA_B52", "AQUILA_B53", - "AQUILA_B56", - "AQUILA_D10", - "AQUILA_D11", - "AQUILA_A14", + "AQUILA_B54", + "AQUILA_B59", + "AQUILA_C18", + "AQUILA_C19", "AQUILA_A13", - "AQUILA_B65", /* 10 */ - "AQUILA_B67", - "AQUILA_B41", - "AQUILA_B43", - "AQUILA_D22", - "AQUILA_D23", - "AQUILA_B57", - "AQUILA_D27", + "AQUILA_A12", + "AQUILA_B75", /* 10 */ + "AQUILA_B77", + "AQUILA_B42", "AQUILA_B44", + "AQUILA_D19", + "AQUILA_D20", + "AQUILA_B58", + "AQUILA_D24", + "AQUILA_B45", "AQUILA_C06", "AQUILA_C05", /* 20 */ - "AQUILA_B34", "AQUILA_B35", "AQUILA_B37", "AQUILA_B36", - "AQUILA_B59", + "AQUILA_B38", + "AQUILA_C25", + "AQUILA_B22", "AQUILA_B21", - "AQUILA_B20", - "AQUILA_B64", - "AQUILA_D28", - "AQUILA_B23", /* 30 */ - "AQUILA_B42", - "AQUILA_C43", - "AQUILA_B45", - "AQUILA_D26", - "AQUILA_B60", + "AQUILA_B74", + "AQUILA_D25", + "AQUILA_B24", /* 30 */ + "AQUILA_B43", + "AQUILA_C38", + "AQUILA_B46", + "AQUILA_D23", + "AQUILA_C26", "AQUILA_A11", - "AQUILA_B58", - "AQUILA_A12", - "AQUILA_D12", - "AQUILA_D15", /* 40 */ - "AQUILA_C41", - "AQUILA_D13", - "AQUILA_D14", - "AQUILA_B79", - "AQUILA_B47", + "AQUILA_B57", + "AQUILA_B19", + "AQUILA_D09", + "AQUILA_D12", /* 40 */ + "AQUILA_C35", + "AQUILA_D10", + "AQUILA_D11", + "AQUILA_B81", "AQUILA_B48", - "AQUILA_D79", - "AQUILA_D78", - "AQUILA_B22", - "AQUILA_B19", /* 50 */ - "AQUILA_D19", - "AQUILA_A05", + "AQUILA_B49", + "AQUILA_B89", + "AQUILA_B90", + "AQUILA_B23", + "AQUILA_B20", /* 50 */ + "AQUILA_D16", + "AQUILA_A06", + "AQUILA_D14", + "AQUILA_D15", "AQUILA_D17", - "AQUILA_D18", - "AQUILA_D20", + "AQUILA_B41", "AQUILA_B40", - "AQUILA_B39", - "AQUILA_A10", - "", - "AQUILA_A03", /* 60 */ "AQUILA_A01", - "AQUILA_A09", - "AQUILA_A08", - "AQUILA_A06", - "AQUILA_A04"; + "", + "AQUILA_A08", /* 60 */ + "AQUILA_A10", + "AQUILA_A02", + "AQUILA_A03", + "AQUILA_A05", + "AQUILA_A07"; }; /* Aquila I2C_3_DSI1 */ @@ -1012,8 +1217,10 @@ status = "disabled"; }; -/* Aquila ETH_2_RGMII */ +/* On-module ETH_1 RGMII */ &mcu_cpsw_port1 { + phy-handle = <&mcu_phy0>; + phy-mode = "rgmii-rxid"; status = "disabled"; }; @@ -1092,6 +1299,137 @@ status = "disabled"; }; +/* Aquila PCIE_1 */ +&pcie0_rc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0_reset>; + num-lanes = <2>; + phy-names = "pcie-phy"; + phys = <&serdes1_pcie0_2l_link>; + reset-gpios = <&main_gpio0 32 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +/* Aquila PCIE_2 */ +&pcie1_rc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie1_reset>; + num-lanes = <2>; + phy-names = "pcie-phy"; + phys = <&serdes0_pcie1_2l_link>; + reset-gpios = <&main_gpio0 41 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +/* On-module PCIe USB Bridge */ +&pcie2_ep { + num-lanes = <1>; + phys = <&serdes1_pcie2_1l_link>; + phy-names = "pcie-phy"; + status = "okay"; +}; + +/* PCIE for On-module Wi-Fi */ +&pcie3_ep { + num-lanes = <1>; + phys = <&serdes0_pcie3_1l_link>; + phy-names = "pcie-phy"; + status = "okay"; +}; + +&serdes0 { + status = "okay"; + + /* Aquila PCIE_2 */ + serdes0_pcie1_2l_link: phy@0 { + reg = <0>; + cdns,num-lanes = <2>; + cdns,phy-type = <PHY_TYPE_PCIE>; + #phy-cells = <0>; + resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>; + }; + + /* On-module PCIe Wi-Fi */ + serdes0_pcie3_1l_link: phy@2 { + reg = <2>; + cdns,num-lanes = <1>; + cdns,phy-type = <PHY_TYPE_PCIE>; + #phy-cells = <0>; + resets = <&serdes_wiz0 3>; + }; + + /* Aquila USB0 SS */ + serdes0_usb0_ss_link: phy@3 { + reg = <3>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USB3>; + resets = <&serdes_wiz0 4>; + }; +}; + +&serdes1 { + status = "okay"; + + /* Aquila PCIE_1 */ + serdes1_pcie0_2l_link: phy@0 { + reg = <0>; + cdns,num-lanes = <2>; + cdns,phy-type = <PHY_TYPE_PCIE>; + #phy-cells = <0>; + resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>; + }; + + /* On-module PCIe USB Bridge */ + serdes1_pcie2_1l_link: phy@2 { + reg = <2>; + cdns,num-lanes = <1>; + cdns,phy-type = <PHY_TYPE_PCIE>; + #phy-cells = <0>; + resets = <&serdes_wiz1 3>; + }; + + /* Aquila ETH_2 xGMII */ + serdes1_sgmii_link: phy@3 { + reg = <3>; + cdns,num-lanes = <1>; + cdns,phy-type = <PHY_TYPE_SGMII>; + #phy-cells = <0>; + resets = <&serdes_wiz1 4>; + }; +}; + +&serdes_refclk { + clock-frequency = <100000000>; +}; + +&serdes_ln_ctrl { + idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, /* Aquila PCIE_2 L0 */ + <J784S4_SERDES0_LANE1_PCIE1_LANE1>, /* Aquila PCIE_2 L1 */ + <J784S4_SERDES0_LANE2_PCIE3_LANE0>, /* On-module PCIe Wi-Fi */ + <J784S4_SERDES0_LANE3_USB>, /* Aquila USB0 SS */ + <J784S4_SERDES1_LANE0_PCIE0_LANE0>, /* Aquila PCIE_1 L0 */ + <J784S4_SERDES1_LANE1_PCIE0_LANE1>, /* Aquila PCIE_1 L1 */ + <J784S4_SERDES1_LANE2_PCIE2_LANE0>, /* On-module PCIe USB Bridge */ + <J784S4_SERDES1_LANE3_QSGMII_LANE2>, /* Aquila ETH_2 xGMII */ + <J784S4_SERDES2_LANE0_QSGMII_LANE5>, /* Aquila SGMII MSP_6 */ + <J784S4_SERDES2_LANE1_QSGMII_LANE6>, /* Aquila SGMII MSP_7 */ + <J784S4_SERDES2_LANE2_QSGMII_LANE7>, /* Aquila SGMII MSP_8 */ + <J784S4_SERDES2_LANE3_QSGMII_LANE8>, /* Aquila SGMII MSP_9 */ + <J784S4_SERDES4_LANE0_EDP_LANE0>, /* Aquila DP L0 */ + <J784S4_SERDES4_LANE1_EDP_LANE1>, /* Aquila DP L1 */ + <J784S4_SERDES4_LANE2_EDP_LANE2>, /* Aquila DP L2 */ + <J784S4_SERDES4_LANE3_EDP_LANE3>; /* Aquila DP L3 */ +}; + +&serdes_wiz0 { + status = "okay"; +}; + +&serdes_wiz1 { + status = "okay"; +}; + /* Aquila ADC_[1-4] */ &tscadc0 { pinctrl-names = "default"; @@ -1103,74 +1441,93 @@ }; }; +&usb0 { + phys = <&serdes0_usb0_ss_link>; + phy-names = "cdns3,usb3-phy"; + dr_mode = "otg"; + maximum-speed = "super-speed"; + status = "disabled"; +}; + +&usb_serdes_mux { + idle-states = <0>; /* USB0 to SERDES lane 3 */ +}; + +&usbss0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_main_usb0ss>; + ti,vbus-divider; + status = "disabled"; +}; + &wkup_gpio0 { gpio-line-names = "", /* 0 */ "", "", - "AQUILA_C55", - "AQUILA_B54", + "AQUILA_C53", "AQUILA_B55", - "AQUILA_B33", + "AQUILA_B56", "AQUILA_B32", - "AQUILA_D09", - "AQUILA_D08", - "AQUILA_D25", /* 10 */ + "AQUILA_B34", + "AQUILA_C17", + "AQUILA_C16", + "AQUILA_D22", /* 10 */ "", "", "", "", "", + "AQUILA_B65", "AQUILA_C20", - "AQUILA_D29", - "AQUILA_C18", - "AQUILA_C22", - "AQUILA_C21", /* 20 */ - "AQUILA_C15", - "AQUILA_C16", - "AQUILA_C25", - "AQUILA_C26", - "AQUILA_C27", - "AQUILC_C28", + "AQUILA_B63", + "AQUILA_B68", + "AQUILA_B67", /* 20 */ + "AQUILA_B61", + "AQUILA_B60", + "AQUILA_B70", + "AQUILA_B71", + "AQUILA_B72", + "AQUILC_B73", + "AQUILA_B66", + "AQUILA_B62", + "AQUILA_C21", + "AQUILA_C22", /* 30 */ "AQUILA_C23", - "AQUILA_C17", - "AQUILA_D30", - "AQUILA_D31", /* 30 */ - "AQUILA_C29", "AQUILA_C01", "AQUILA_C02", "", - "AQUILA_D24", + "AQUILA_D21", "", "AQUILA_C03", - "AQUILA_C30", + "AQUILA_C24", "AQUILA_C04", "AQUILA_B84", /* 40 */ - "AQUILA_B75", + "", "AQUILA_B86", "AQUILA_B87", - "AQUILA_B89", - "AQUILA_B90", + "", + "", "AQUILA_B83", - "AQUILA_B74", - "AQUILA_B81", "", - "AQUILA_B78", /* 50 */ - "AQUILA_B77", - "AQUILA_B71", - "AQUILA_B72", + "", + "", + "", /* 50 */ + "", + "", + "", "", "", "", "", - "AQUILA_B30", "AQUILA_B31", - "AQUILA_B49", /* 60 */ - "AQUILA_B50", - "AQUILA_B80", + "AQUILA_B33", + "AQUILA_B50", /* 60 */ + "AQUILA_B51", "", "", - "AQUILA_B63", + "", + "AQUILA_D08", "", "", "", @@ -1180,19 +1537,19 @@ "AQUILA_D02", "AQUILA_D03", "AQUILA_D04", - "AQUILA_C62", - "AQUILA_C61", - "AQUILA_C65", - "AQUILA_C64", + "AQUILA_D54", + "AQUILA_D55", + "AQUILA_C55", + "AQUILA_C56", "", - "AQUILA_C42", /* 80 */ + "AQUILA_C36", /* 80 */ "", "", "", - "AQUILA_C58", "", "", - "AQUILA_B62", + "", + "AQUILA_D07", ""; }; @@ -1228,6 +1585,96 @@ interrupts = <34 IRQ_TYPE_EDGE_FALLING>; }; + pmic_tps6594: pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic_int>; + /* TODO : Explore option to use EXTINTN internal IRQ# */ + interrupt-parent = <&main_gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + #gpio-cells = <2>; + gpio-controller; + + buck12-supply = <®_vin>; + buck3-supply = <®_vin>; + buck4-supply = <®_vin>; + buck5-supply = <®_vin>; + ldo1-supply = <®_vin>; + ldo2-supply = <®_vin>; + ldo3-supply = <®_vin>; + ldo4-supply = <®_vin>; + system-power-controller; + ti,primary-pmic; + + regulators { + reg_vdd_ddr: buck12 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "+V1.1_VDD_DDR (PMIC BUCK12)"; + }; + + reg_vdd_ram: buck3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <850000>; + regulator-min-microvolt = <850000>; + regulator-name = "+V0.85_VDD_RAM (PMIC BUCK3)"; + }; + + reg_vdd_io: buck4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_VDD_IO (PMIC BUCK4)"; + }; + + reg_vdd_mcu: buck5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <850000>; + regulator-min-microvolt = <850000>; + regulator-name = "+V0.85_VDD_MCU (PMIC BUCK5)"; + }; + + reg_vda_phy: ldo1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_VDA_PHY (PMIC LDO1)"; + }; + + reg_mcu_io: ldo2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "+V1.8_MCU_IO (PMIC LDO2)"; + }; + + reg_vda_dll: ldo3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-name = "+V0.8_VDA_DLL (PMIC LDO3)"; + }; + + reg_vda_pll: ldo4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "+V0.8_VDA_PLL (PMIC LDO4)"; + }; + }; + }; + sensor@4f { compatible = "ti,tmp1075"; reg = <0x4f>; @@ -1240,6 +1687,14 @@ }; }; +&wkup_gpio0 { + status = "okay"; +}; + +&wkup_gpio_intr { + status = "okay"; +}; + /* Aquila UART_2 */ &wkup_uart0 { pinctrl-names = "default"; |