diff options
Diffstat (limited to 'arch/arm64')
33 files changed, 1192 insertions, 115 deletions
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index cd822d8454c0..307237cfe728 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -27,6 +27,8 @@ $(warning LSE atomics not supported by binutils) endif KBUILD_CFLAGS += -mgeneral-regs-only $(lseinstr) +KBUILD_CFLAGS += -fno-asynchronous-unwind-tables +KBUILD_CFLAGS += $(call cc-option, -mpc-relative-literal-loads) KBUILD_AFLAGS += $(lseinstr) ifeq ($(CONFIG_CPU_BIG_ENDIAN), y) diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile index cfdf701e05df..ba84770f789f 100644 --- a/arch/arm64/boot/dts/amd/Makefile +++ b/arch/arm64/boot/dts/amd/Makefile @@ -1,4 +1,6 @@ -dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb +dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \ + amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb \ + husky.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts new file mode 100644 index 000000000000..8e3074a4947d --- /dev/null +++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts @@ -0,0 +1,87 @@ +/* + * DTS file for AMD Seattle Overdrive Development Board + * Note: For Seattle Rev.B0 + * + * Copyright (C) 2015 Advanced Micro Devices, Inc. + */ + +/dts-v1/; + +/include/ "amd-seattle-soc.dtsi" + +/ { + model = "AMD Seattle (Rev.B0) Development Board (Overdrive)"; + compatible = "amd,seattle-overdrive", "amd,seattle"; + + chosen { + stdout-path = &serial0; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; +}; + +&ccp0 { + status = "ok"; + amd,zlib-support = <1>; +}; + +/** + * NOTE: In Rev.B, gpio0 is reserved. + */ +&gpio1 { + status = "ok"; +}; + +&gpio2 { + status = "ok"; +}; + +&gpio3 { + status = "ok"; +}; + +&gpio4 { + status = "ok"; +}; + +&i2c0 { + status = "ok"; +}; + +&i2c1 { + status = "ok"; +}; + +&pcie0 { + status = "ok"; +}; + +&spi0 { + status = "ok"; +}; + +&spi1 { + status = "ok"; + sdcard0: sdcard@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + spi-max-frequency = <20000000>; + voltage-ranges = <3200 3400>; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,com-mode = <0x0>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + }; +}; + +&ipmi_kcs { + status = "ok"; +}; + +&smb0 { + /include/ "amd-seattle-xgbe-b.dtsi" +}; diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts new file mode 100644 index 000000000000..ed5e043f37aa --- /dev/null +++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts @@ -0,0 +1,91 @@ +/* + * DTS file for AMD Seattle Overdrive Development Board + * Note: For Seattle Rev.B1 + * + * Copyright (C) 2015 Advanced Micro Devices, Inc. + */ + +/dts-v1/; + +/include/ "amd-seattle-soc.dtsi" + +/ { + model = "AMD Seattle (Rev.B1) Development Board (Overdrive)"; + compatible = "amd,seattle-overdrive", "amd,seattle"; + + chosen { + stdout-path = &serial0; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; +}; + +&ccp0 { + status = "ok"; + amd,zlib-support = <1>; +}; + +/** + * NOTE: In Rev.B, gpio0 is reserved. + */ +&gpio1 { + status = "ok"; +}; + +&gpio2 { + status = "ok"; +}; + +&gpio3 { + status = "ok"; +}; + +&gpio4 { + status = "ok"; +}; + +&i2c0 { + status = "ok"; +}; + +&i2c1 { + status = "ok"; +}; + +&pcie0 { + status = "ok"; +}; + +&sata1 { + status = "ok"; +}; + +&spi0 { + status = "ok"; +}; + +&spi1 { + status = "ok"; + sdcard0: sdcard@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + spi-max-frequency = <20000000>; + voltage-ranges = <3200 3400>; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,com-mode = <0x0>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + }; +}; + +&ipmi_kcs { + status = "ok"; +}; + +&smb0 { + /include/ "amd-seattle-xgbe-b.dtsi" +}; diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi index 2874d92881fd..bd3adeac374f 100644 --- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi +++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi @@ -18,8 +18,8 @@ #size-cells = <2>; reg = <0x0 0xe1110000 0 0x1000>, <0x0 0xe112f000 0 0x2000>, - <0x0 0xe1140000 0 0x10000>, - <0x0 0xe1160000 0 0x10000>; + <0x0 0xe1140000 0 0x2000>, + <0x0 0xe1160000 0 0x2000>; interrupts = <1 9 0xf04>; ranges = <0 0 0 0xe1100000 0 0x100000>; v2m0: v2m@e0080000 { @@ -55,25 +55,47 @@ #size-cells = <2>; ranges; - /* DDR range is 40-bit addressing */ - dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>; + /* + * dma-ranges is 40-bit address space containing: + * - GICv2m MSI register is at 0xe0080000 + * - DRAM range [0x8000000000 to 0xffffffffff] + */ + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; /include/ "amd-seattle-clks.dtsi" sata0: sata@e0300000 { compatible = "snps,dwc-ahci"; - reg = <0 0xe0300000 0 0x800>; + reg = <0 0xe0300000 0 0xf0000>; interrupts = <0 355 4>; clocks = <&sataclk_333mhz>; dma-coherent; }; + /* This is for Rev B only */ + sata1: sata@e0d00000 { + status = "disabled"; + compatible = "snps,dwc-ahci"; + reg = <0 0xe0d00000 0 0xf0000>; + interrupts = <0 354 4>; + clocks = <&sataclk_333mhz>; + dma-coherent; + }; + i2c0: i2c@e1000000 { status = "disabled"; compatible = "snps,designware-i2c"; reg = <0 0xe1000000 0 0x1000>; interrupts = <0 357 4>; - clocks = <&uartspiclk_100mhz>; + clocks = <&miscclk_250mhz>; + }; + + i2c1: i2c@e0050000 { + status = "disabled"; + compatible = "snps,designware-i2c"; + reg = <0 0xe0050000 0 0x1000>; + interrupts = <0 340 4>; + clocks = <&miscclk_250mhz>; }; serial0: serial@e1010000 { @@ -87,7 +109,6 @@ spi0: ssp@e1020000 { status = "disabled"; compatible = "arm,pl022", "arm,primecell"; - #gpio-cells = <2>; reg = <0 0xe1020000 0 0x1000>; spi-controller; interrupts = <0 330 4>; @@ -98,7 +119,6 @@ spi1: ssp@e1030000 { status = "disabled"; compatible = "arm,pl022", "arm,primecell"; - #gpio-cells = <2>; reg = <0 0xe1030000 0 0x1000>; spi-controller; interrupts = <0 329 4>; @@ -109,7 +129,7 @@ #size-cells = <0>; }; - gpio0: gpio@e1040000 { + gpio0: gpio@e1040000 { /* Not available to OS for B0 */ status = "disabled"; compatible = "arm,pl061", "arm,primecell"; #gpio-cells = <2>; @@ -118,18 +138,59 @@ interrupts = <0 359 4>; interrupt-controller; #interrupt-cells = <2>; - clocks = <&uartspiclk_100mhz>; + clocks = <&miscclk_250mhz>; clock-names = "apb_pclk"; }; - gpio1: gpio@e1050000 { + gpio1: gpio@e1050000 { /* [0:7] */ status = "disabled"; compatible = "arm,pl061", "arm,primecell"; #gpio-cells = <2>; reg = <0 0xe1050000 0 0x1000>; gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; interrupts = <0 358 4>; - clocks = <&uartspiclk_100mhz>; + clocks = <&miscclk_250mhz>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@e0020000 { /* [8:15] */ + status = "disabled"; + compatible = "arm,pl061", "arm,primecell"; + #gpio-cells = <2>; + reg = <0 0xe0020000 0 0x1000>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 366 4>; + clocks = <&miscclk_250mhz>; + clock-names = "apb_pclk"; + }; + + gpio3: gpio@e0030000 { /* [16:23] */ + status = "disabled"; + compatible = "arm,pl061", "arm,primecell"; + #gpio-cells = <2>; + reg = <0 0xe0030000 0 0x1000>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 365 4>; + clocks = <&miscclk_250mhz>; + clock-names = "apb_pclk"; + }; + + gpio4: gpio@e0080000 { /* [24] */ + status = "disabled"; + compatible = "arm,pl061", "arm,primecell"; + #gpio-cells = <2>; + reg = <0 0xe0080000 0 0x1000>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 361 4>; + clocks = <&miscclk_250mhz>; clock-names = "apb_pclk"; }; @@ -159,7 +220,7 @@ <0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>; dma-coherent; - dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>; + dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>; ranges = /* I/O Memory (size=64K) */ <0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>, @@ -168,5 +229,22 @@ /* 64-bit MMIO (size= 124G) */ <0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>; }; + + /* Perf CCN504 PMU */ + ccn: ccn@e8000000 { + compatible = "arm,ccn-504"; + reg = <0x0 0xe8000000 0 0x1000000>; + interrupts = <0 380 4>; + }; + + ipmi_kcs: kcs@e0010000 { + status = "disabled"; + compatible = "ipmi-kcs"; + device_type = "ipmi"; + reg = <0x0 0xe0010000 0 0x8>; + interrupts = <0 389 4>; + reg-size = <1>; + reg-spacing = <4>; + }; }; }; diff --git a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi new file mode 100644 index 000000000000..8e8631952497 --- /dev/null +++ b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi @@ -0,0 +1,117 @@ +/* + * DTS file for AMD Seattle XGBE (RevB) + * + * Copyright (C) 2015 Advanced Micro Devices, Inc. + */ + + xgmacclk0_dma_250mhz: clk250mhz_0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + clock-output-names = "xgmacclk0_dma_250mhz"; + }; + + xgmacclk0_ptp_250mhz: clk250mhz_1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + clock-output-names = "xgmacclk0_ptp_250mhz"; + }; + + xgmacclk1_dma_250mhz: clk250mhz_2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + clock-output-names = "xgmacclk1_dma_250mhz"; + }; + + xgmacclk1_ptp_250mhz: clk250mhz_3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + clock-output-names = "xgmacclk1_ptp_250mhz"; + }; + + xgmac0: xgmac@e0700000 { + compatible = "amd,xgbe-seattle-v1a"; + reg = <0 0xe0700000 0 0x80000>, + <0 0xe0780000 0 0x80000>, + <0 0xe1240800 0 0x00400>, /* SERDES RX/TX0 */ + <0 0xe1250000 0 0x00060>, /* SERDES IR 1/2 */ + <0 0xe12500f8 0 0x00004>; /* SERDES IR 2/2 */ + interrupts = <0 325 4>, + <0 346 1>, <0 347 1>, <0 348 1>, <0 349 1>, + <0 323 4>; + amd,per-channel-interrupt; + amd,speed-set = <0>; + amd,serdes-blwc = <1>, <1>, <0>; + amd,serdes-cdr-rate = <2>, <2>, <7>; + amd,serdes-pq-skew = <10>, <10>, <18>; + amd,serdes-tx-amp = <0>, <0>, <0>; + amd,serdes-dfe-tap-config = <3>, <3>, <3>; + amd,serdes-dfe-tap-enable = <0>, <0>, <7>; + mac-address = [ 02 A1 A2 A3 A4 A5 ]; + clocks = <&xgmacclk0_dma_250mhz>, <&xgmacclk0_ptp_250mhz>; + clock-names = "dma_clk", "ptp_clk"; + phy-mode = "xgmii"; + #stream-id-cells = <16>; + dma-coherent; + }; + + xgmac1: xgmac@e0900000 { + compatible = "amd,xgbe-seattle-v1a"; + reg = <0 0xe0900000 0 0x80000>, + <0 0xe0980000 0 0x80000>, + <0 0xe1240c00 0 0x00400>, /* SERDES RX/TX1 */ + <0 0xe1250080 0 0x00060>, /* SERDES IR 1/2 */ + <0 0xe12500fc 0 0x00004>; /* SERDES IR 2/2 */ + interrupts = <0 324 4>, + <0 341 1>, <0 342 1>, <0 343 1>, <0 344 1>, + <0 322 4>; + amd,per-channel-interrupt; + amd,speed-set = <0>; + amd,serdes-blwc = <1>, <1>, <0>; + amd,serdes-cdr-rate = <2>, <2>, <7>; + amd,serdes-pq-skew = <10>, <10>, <18>; + amd,serdes-tx-amp = <0>, <0>, <0>; + amd,serdes-dfe-tap-config = <3>, <3>, <3>; + amd,serdes-dfe-tap-enable = <0>, <0>, <7>; + mac-address = [ 02 B1 B2 B3 B4 B5 ]; + clocks = <&xgmacclk1_dma_250mhz>, <&xgmacclk1_ptp_250mhz>; + clock-names = "dma_clk", "ptp_clk"; + phy-mode = "xgmii"; + #stream-id-cells = <16>; + dma-coherent; + }; + + xgmac0_smmu: smmu@e0600000 { + compatible = "arm,mmu-401"; + reg = <0 0xe0600000 0 0x10000>; + #global-interrupts = <1>; + interrupts = /* Uses combined intr for both + * global and context + */ + <0 336 4>, + <0 336 4>; + + mmu-masters = <&xgmac0 + 0 1 2 3 4 5 6 7 + 16 17 18 19 20 21 22 23 + >; + }; + + xgmac1_smmu: smmu@e0800000 { + compatible = "arm,mmu-401"; + reg = <0 0xe0800000 0 0x10000>; + #global-interrupts = <1>; + interrupts = /* Uses combined intr for both + * global and context + */ + <0 335 4>, + <0 335 4>; + + mmu-masters = <&xgmac1 + 0 1 2 3 4 5 6 7 + 16 17 18 19 20 21 22 23 + >; + }; diff --git a/arch/arm64/boot/dts/amd/husky.dts b/arch/arm64/boot/dts/amd/husky.dts new file mode 100644 index 000000000000..1381d4b2bf1b --- /dev/null +++ b/arch/arm64/boot/dts/amd/husky.dts @@ -0,0 +1,83 @@ +/* + * DTS file for AMD/Linaro 96Boards Enterprise Edition Server (Husky) Board + * Note: Based-on AMD Seattle Rev.B0 + * + * Copyright (C) 2015 Advanced Micro Devices, Inc. + */ + +/dts-v1/; + +/include/ "amd-seattle-soc.dtsi" + +/ { + model = "Linaro 96Boards Enterprise Edition Server (Husky) Board"; + compatible = "amd,seattle-overdrive", "amd,seattle"; + + chosen { + stdout-path = &serial0; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; +}; + +&ccp0 { + status = "ok"; + amd,zlib-support = <1>; +}; + +/** + * NOTE: In Rev.B, gpio0 is reserved. + */ +&gpio1 { + status = "ok"; +}; + +&gpio2 { + status = "ok"; +}; + +&gpio3 { + status = "ok"; +}; + +&gpio4 { + status = "ok"; +}; + +&i2c0 { + status = "ok"; +}; + +&i2c1 { + status = "ok"; +}; + +&pcie0 { + status = "ok"; +}; + +&spi0 { + status = "ok"; +}; + +&spi1 { + status = "ok"; + sdcard0: sdcard@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + spi-max-frequency = <20000000>; + voltage-ranges = <3200 3400>; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,com-mode = <0x0>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + }; +}; + +&smb0 { + /include/ "amd-seattle-xgbe-b.dtsi" +}; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index dd5158eb5872..e5b59ca9debb 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -115,6 +115,7 @@ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi index da7b6e613257..933cba359918 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi @@ -23,9 +23,8 @@ soc0: soc@000000000 { }; }; - dsa: dsa@c7000000 { + dsaf0: dsa@c7000000 { compatible = "hisilicon,hns-dsaf-v1"; - dsa_name = "dsaf0"; mode = "6port-16rss"; interrupt-parent = <&mbigen_dsa>; @@ -127,7 +126,7 @@ soc0: soc@000000000 { eth0: ethernet@0{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <0>; local-mac-address = [00 00 00 01 00 58]; status = "disabled"; @@ -135,14 +134,14 @@ soc0: soc@000000000 { }; eth1: ethernet@1{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <1>; status = "disabled"; dma-coherent; }; eth2: ethernet@2{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <2>; local-mac-address = [00 00 00 01 00 5a]; status = "disabled"; @@ -150,7 +149,7 @@ soc0: soc@000000000 { }; eth3: ethernet@3{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <3>; local-mac-address = [00 00 00 01 00 5b]; status = "disabled"; @@ -158,7 +157,7 @@ soc0: soc@000000000 { }; eth4: ethernet@4{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <4>; local-mac-address = [00 00 00 01 00 5c]; status = "disabled"; @@ -166,7 +165,7 @@ soc0: soc@000000000 { }; eth5: ethernet@5{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <5>; local-mac-address = [00 00 00 01 00 5d]; status = "disabled"; @@ -174,7 +173,7 @@ soc0: soc@000000000 { }; eth6: ethernet@6{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <6>; local-mac-address = [00 00 00 01 00 5e]; status = "disabled"; @@ -182,7 +181,7 @@ soc0: soc@000000000 { }; eth7: ethernet@7{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <7>; local-mac-address = [00 00 00 01 00 5f]; status = "disabled"; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 348f4db4f313..2114af8d312d 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -1,6 +1,10 @@ +# Berlin SoC Family dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb +# Mvebu SoC Family +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb + always := $(dtb-y) subdir-y := $(dts-dirs) clean-files := *.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-371x.dtsi b/arch/arm64/boot/dts/marvell/armada-371x.dtsi new file mode 100644 index 000000000000..c9e5325b8ac3 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-371x.dtsi @@ -0,0 +1,53 @@ +/* + * Device Tree Include file for Marvell Armada 371x family of SoCs + * (also named 88F3710) + * + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armada-37xx.dtsi" + +/ { + model = "Marvell Armada 3710 SoC"; + compatible = "marvell,armada3710", "marvell,armada3700"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts new file mode 100644 index 000000000000..359050154511 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -0,0 +1,86 @@ +/* + * Device Tree file for Marvell Armada 3720 development board + * (DB-88F3720-DDR3) + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "armada-372x.dtsi" + +/ { + model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3"; + compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + soc { + internal-regs { + /* + * Exported on the micro USB connector CON32 + * through an FTDI + */ + uart0: serial@12000 { + status = "okay"; + }; + + /* CON31 */ + usb3@58000 { + status = "okay"; + }; + + /* CON3 */ + sata@e0000 { + status = "okay"; + }; + }; + }; +}; + diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi new file mode 100644 index 000000000000..f292a00ce97c --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi @@ -0,0 +1,63 @@ +/* + * Device Tree Include file for Marvell Armada 372x family of SoCs + * (also named 88F3720) + * + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armada-37xx.dtsi" + +/ { + model = "Marvell Armada 3720 SoC"; + compatible = "marvell,armada3720", "marvell,armada3710"; + + cpus { + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x1>; + enable-method = "psci"; + }; + }; + +}; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi new file mode 100644 index 000000000000..ba9df7ff2a72 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -0,0 +1,131 @@ +/* + * Device Tree Include file for Marvell Armada 37xx family of SoCs. + * + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Marvell Armada 37xx SoC"; + compatible = "marvell,armada3700"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + internal-regs { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + /* 32M internal register @ 0xd000_0000 */ + ranges = <0x0 0x0 0xd0000000 0x2000000>; + + uart0: serial@12000 { + compatible = "marvell,armada-3700-uart"; + reg = <0x12000 0x400>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + usb3@58000 { + compatible = "generic-xhci"; + reg = <0x58000 0x4000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sata@e0000 { + compatible = "marvell,armada-3700-ahci"; + reg = <0xe0000 0x2000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + gic: interrupt-controller@1d00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1d00000 0x10000>, /* GICD */ + <0x1d40000 0x40000>; /* GICR */ + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index e427f04a9f45..7453a47b3047 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -214,6 +214,9 @@ }; &pwrap { + /* Only MT8173 E1 needs USB power domain */ + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + pmic: mt6397 { compatible = "mediatek,mt6397"; interrupt-parent = <&pio>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index ec135eae31f5..f4bd3c9182ad 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -277,6 +277,11 @@ reg = <0 0x10200620 0 0x20>; }; + efuse: efuse@10206000 { + compatible = "mediatek,mt8173-efuse"; + reg = <0 0x10206000 0 0x1000>; + }; + apmixedsys: clock-controller@10209000 { compatible = "mediatek,mt8173-apmixedsys"; reg = <0 0x10209000 0 0x1000>; @@ -397,6 +402,17 @@ status = "disabled"; }; + nor_flash: spi@1100d000 { + compatible = "mediatek,mt8173-nor"; + reg = <0 0x1100d000 0 0xe0>; + clocks = <&pericfg CLK_PERI_SPI>, + <&topckgen CLK_TOP_SPINFI_IFR_SEL>; + clock-names = "spi", "sf"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c3: i2c@11010000 { compatible = "mediatek,mt8173-i2c"; reg = <0 0x11010000 0 0x70>, diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index 7dfe1c085966..62f33fc84e3e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -12,6 +12,8 @@ rtc1 = "/rtc@0,7000e000"; }; + chosen { }; + memory { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 265d12ff6022..31ace9c1f79d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -93,6 +93,9 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + scif1_pins: scif1 { renesas,groups = "scif1_data_a", "scif1_ctrl"; renesas,function = "scif1"; @@ -101,6 +104,10 @@ renesas,groups = "scif2_data_a"; renesas,function = "scif2"; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk_a"; + renesas,function = "scif_clk"; + }; i2c2_pins: i2c2 { renesas,groups = "i2c2_a"; @@ -138,6 +145,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + &i2c2 { pinctrl-0 = <&i2c2_pins>; pinctrl-names = "default"; @@ -249,3 +261,7 @@ interrupts = <11 IRQ_TYPE_LEVEL_LOW>; }; }; + +&xhci0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index bb353cde1253..9634e3a4858e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -99,6 +99,14 @@ clock-frequency = <0>; }; + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + status = "disabled"; + }; + soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -333,15 +341,102 @@ }; dmac0: dma-controller@e6700000 { - /* Empty node for now */ + compatible = "renesas,dmac-r8a7795", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&cpg>; + #dma-cells = <1>; + dma-channels = <16>; }; dmac1: dma-controller@e7300000 { - /* Empty node for now */ + compatible = "renesas,dmac-r8a7795", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&cpg>; + #dma-cells = <1>; + dma-channels = <16>; }; dmac2: dma-controller@e7310000 { - /* Empty node for now */ + compatible = "renesas,dmac-r8a7795", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&cpg>; + #dma-cells = <1>; + dma-channels = <16>; }; avb: ethernet@e6800000 { @@ -387,11 +482,15 @@ }; hscif0: serial@e6540000 { - compatible = "renesas,hscif-r8a7795", "renesas,hscif"; + compatible = "renesas,hscif-r8a7795", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; reg = <0 0xe6540000 0 96>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 520>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x31>, <&dmac1 0x30>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -399,11 +498,15 @@ }; hscif1: serial@e6550000 { - compatible = "renesas,hscif-r8a7795", "renesas,hscif"; + compatible = "renesas,hscif-r8a7795", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; reg = <0 0xe6550000 0 96>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 519>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x33>, <&dmac1 0x32>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -411,11 +514,15 @@ }; hscif2: serial@e6560000 { - compatible = "renesas,hscif-r8a7795", "renesas,hscif"; + compatible = "renesas,hscif-r8a7795", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; reg = <0 0xe6560000 0 96>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 518>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x35>, <&dmac1 0x34>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -423,11 +530,15 @@ }; hscif3: serial@e66a0000 { - compatible = "renesas,hscif-r8a7795", "renesas,hscif"; + compatible = "renesas,hscif-r8a7795", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; reg = <0 0xe66a0000 0 96>; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 517>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x37>, <&dmac0 0x36>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -435,11 +546,15 @@ }; hscif4: serial@e66b0000 { - compatible = "renesas,hscif-r8a7795", "renesas,hscif"; + compatible = "renesas,hscif-r8a7795", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; reg = <0 0xe66b0000 0 96>; interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 516>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x39>, <&dmac0 0x38>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -447,11 +562,14 @@ }; scif0: serial@e6e60000 { - compatible = "renesas,scif-r8a7795", "renesas,scif"; + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 207>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x51>, <&dmac1 0x50>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -459,11 +577,14 @@ }; scif1: serial@e6e68000 { - compatible = "renesas,scif-r8a7795", "renesas,scif"; + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 206>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x53>, <&dmac1 0x52>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -471,11 +592,14 @@ }; scif2: serial@e6e88000 { - compatible = "renesas,scif-r8a7795", "renesas,scif"; + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6e88000 0 64>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 310>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x13>, <&dmac1 0x12>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -483,11 +607,14 @@ }; scif3: serial@e6c50000 { - compatible = "renesas,scif-r8a7795", "renesas,scif"; + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 204>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x57>, <&dmac0 0x56>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -495,11 +622,14 @@ }; scif4: serial@e6c40000 { - compatible = "renesas,scif-r8a7795", "renesas,scif"; + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 203>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac0 0x59>, <&dmac0 0x58>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -507,11 +637,14 @@ }; scif5: serial@e6f30000 { - compatible = "renesas,scif-r8a7795", "renesas,scif"; + compatible = "renesas,scif-r8a7795", + "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6f30000 0 64>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 202>; - clock-names = "sci_ick"; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A7795_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; dmas = <&dmac1 0x5b>, <&dmac1 0x5a>; dma-names = "tx", "rx"; power-domains = <&cpg>; @@ -775,5 +908,49 @@ clocks = <&cpg CPG_MOD 815>; status = "disabled"; }; + + xhci0: usb@ee000000 { + compatible = "renesas,xhci-r8a7795"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&cpg>; + status = "disabled"; + }; + + xhci1: usb@ee0400000 { + compatible = "renesas,xhci-r8a7795"; + reg = <0 0xee040000 0 0xc00>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 327>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a7795-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&cpg>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a7795-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&cpg>; + #dma-cells = <1>; + dma-channels = <2>; + }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi index 8c219ccf67a3..6e27b22704df 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -111,7 +111,7 @@ pinctrl-0 = <&pwr_key>; button@0 { - gpio-key,wakeup = <1>; + wakeup-source; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <116>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index 104cbee762bb..1f2b642e794a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -71,7 +71,7 @@ pinctrl-0 = <&pwr_key>; button@0 { - gpio-key,wakeup = <1>; + wakeup-source; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <116>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 122777b1441e..49d119103e31 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -231,8 +231,9 @@ compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0c0000 0x0 0x4000>; clock-freq-min-max = <400000 150000000>; - clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; - clock-names = "biu", "ciu"; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -254,8 +255,9 @@ compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0f0000 0x0 0x4000>; clock-freq-min-max = <400000 150000000>; - clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; - clock-names = "biu", "ciu"; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 18ca9fb9e65f..86581f793e39 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -16,7 +16,6 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y -CONFIG_MEMCG_KMEM=y CONFIG_CGROUP_HUGETLB=y # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set @@ -37,15 +36,13 @@ CONFIG_ARCH_EXYNOS7=y CONFIG_ARCH_LAYERSCAPE=y CONFIG_ARCH_HISI=y CONFIG_ARCH_MEDIATEK=y +CONFIG_ARCH_QCOM=y CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_SEATTLE=y CONFIG_ARCH_RENESAS=y CONFIG_ARCH_R8A7795=y CONFIG_ARCH_STRATIX10=y CONFIG_ARCH_TEGRA=y -CONFIG_ARCH_TEGRA_132_SOC=y -CONFIG_ARCH_TEGRA_210_SOC=y -CONFIG_ARCH_QCOM=y CONFIG_ARCH_SPRD=y CONFIG_ARCH_THUNDER=y CONFIG_ARCH_UNIPHIER=y @@ -54,14 +51,19 @@ CONFIG_ARCH_XGENE=y CONFIG_ARCH_ZYNQMP=y CONFIG_PCI=y CONFIG_PCI_MSI=y +CONFIG_PCI_IOV=y +CONFIG_PCI_RCAR_GEN2_PCIE=y CONFIG_PCI_HOST_GENERIC=y CONFIG_PCI_XGENE=y -CONFIG_SMP=y +CONFIG_PCI_LAYERSCAPE=y +CONFIG_PCI_HISI=y +CONFIG_PCIE_QCOM=y CONFIG_SCHED_MC=y CONFIG_PREEMPT=y CONFIG_KSM=y CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_CMA=y +CONFIG_XEN=y CONFIG_CMDLINE="console=ttyAMA0" # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_COMPAT=y @@ -100,7 +102,11 @@ CONFIG_PATA_OF_PLATFORM=y CONFIG_NETDEVICES=y CONFIG_TUN=y CONFIG_VIRTIO_NET=y +CONFIG_AMD_XGBE=y CONFIG_NET_XGENE=y +CONFIG_E1000E=y +CONFIG_IGB=y +CONFIG_IGBVF=y CONFIG_SKY2=y CONFIG_RAVB=y CONFIG_SMC91X=y @@ -117,25 +123,23 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_8250_UNIPHIER=y +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_UARTS_4=y -CONFIG_SERIAL_SAMSUNG_UARTS=4 CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=11 CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_VIRTIO_CONSOLE=y # CONFIG_HW_RANDOM is not set -CONFIG_I2C=y CONFIG_I2C_QUP=y +CONFIG_I2C_UNIPHIER_F=y CONFIG_I2C_RCAR=y CONFIG_SPI=y CONFIG_SPI_PL022=y @@ -176,8 +180,6 @@ CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SPI=y CONFIG_MMC_DW=y -CONFIG_MMC_DW_IDMAC=y -CONFIG_MMC_DW_PLTFM=y CONFIG_MMC_DW_EXYNOS=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -187,28 +189,33 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_CPU=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_EFI=y +CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_XGENE=y CONFIG_DMADEVICES=y -CONFIG_RCAR_DMAC=y CONFIG_QCOM_BAM_DMA=y CONFIG_TEGRA20_APB_DMA=y +CONFIG_RCAR_DMAC=y +CONFIG_VFIO=y +CONFIG_VFIO_PCI=y CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_BALLOON=y CONFIG_VIRTIO_MMIO=y +CONFIG_XEN_GNTDEV=y +CONFIG_XEN_GRANT_DEV_ALLOC=y CONFIG_COMMON_CLK_CS2000_CP=y CONFIG_COMMON_CLK_QCOM=y CONFIG_MSM_GCC_8916=y CONFIG_HWSPINLOCK_QCOM=y -# CONFIG_IOMMU_SUPPORT is not set +CONFIG_ARM_SMMU=y CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD=y CONFIG_QCOM_SMD_RPM=y +CONFIG_ARCH_TEGRA_132_SOC=y +CONFIG_ARCH_TEGRA_210_SOC=y +CONFIG_HISILICON_IRQ_MBIGEN=y CONFIG_PHY_XGENE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y CONFIG_QUOTA=y @@ -239,6 +246,7 @@ CONFIG_LOCKUP_DETECTOR=y # CONFIG_FTRACE is not set CONFIG_MEMTEST=y CONFIG_SECURITY=y +CONFIG_CRYPTO_ECHAINIV=y CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_ARM64_CRYPTO=y CONFIG_CRYPTO_SHA1_ARM64_CE=y diff --git a/arch/arm64/include/asm/futex.h b/arch/arm64/include/asm/futex.h index 007a69fc4f40..5f3ab8c1db55 100644 --- a/arch/arm64/include/asm/futex.h +++ b/arch/arm64/include/asm/futex.h @@ -121,6 +121,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, return -EFAULT; asm volatile("// futex_atomic_cmpxchg_inatomic\n" +ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, CONFIG_ARM64_PAN) " prfm pstl1strm, %2\n" "1: ldxr %w1, %2\n" " sub %w3, %w1, %w4\n" @@ -137,6 +138,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, " .align 3\n" " .quad 1b, 4b, 2b, 4b\n" " .popsection\n" +ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN) : "+r" (ret), "=&r" (val), "+Q" (*uaddr), "=&r" (tmp) : "r" (oldval), "r" (newval), "Ir" (-EFAULT) : "memory"); diff --git a/arch/arm64/include/asm/page.h b/arch/arm64/include/asm/page.h index 9b2f5a9d019d..ae615b9d9a55 100644 --- a/arch/arm64/include/asm/page.h +++ b/arch/arm64/include/asm/page.h @@ -39,6 +39,7 @@ #ifndef __ASSEMBLY__ +#include <linux/personality.h> /* for READ_IMPLIES_EXEC */ #include <asm/pgtable-types.h> extern void __cpu_clear_user_page(void *p, unsigned long user); diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 2d545d7aa80b..bf464de33f52 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -67,11 +67,11 @@ extern void __pgd_error(const char *file, int line, unsigned long val); #define PROT_DEFAULT (PTE_TYPE_PAGE | PTE_AF | PTE_SHARED) #define PROT_SECT_DEFAULT (PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S) -#define PROT_DEVICE_nGnRnE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRnE)) -#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE)) -#define PROT_NORMAL_NC (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_NORMAL_NC)) -#define PROT_NORMAL_WT (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_NORMAL_WT)) -#define PROT_NORMAL (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_NORMAL)) +#define PROT_DEVICE_nGnRnE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRnE)) +#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRE)) +#define PROT_NORMAL_NC (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_NC)) +#define PROT_NORMAL_WT (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_WT)) +#define PROT_NORMAL (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL)) #define PROT_SECT_DEVICE_nGnRE (PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_DEVICE_nGnRE)) #define PROT_SECT_NORMAL (PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL)) @@ -81,7 +81,7 @@ extern void __pgd_error(const char *file, int line, unsigned long val); #define PAGE_KERNEL __pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE) #define PAGE_KERNEL_RO __pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_RDONLY) -#define PAGE_KERNEL_ROX __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_RDONLY) +#define PAGE_KERNEL_ROX __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_RDONLY) #define PAGE_KERNEL_EXEC __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE) #define PAGE_KERNEL_EXEC_CONT __pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_CONT) @@ -153,6 +153,7 @@ extern struct page *empty_zero_page; #define pte_write(pte) (!!(pte_val(pte) & PTE_WRITE)) #define pte_exec(pte) (!(pte_val(pte) & PTE_UXN)) #define pte_cont(pte) (!!(pte_val(pte) & PTE_CONT)) +#define pte_user(pte) (!!(pte_val(pte) & PTE_USER)) #ifdef CONFIG_ARM64_HW_AFDBM #define pte_hw_dirty(pte) (pte_write(pte) && !(pte_val(pte) & PTE_RDONLY)) @@ -163,8 +164,6 @@ extern struct page *empty_zero_page; #define pte_dirty(pte) (pte_sw_dirty(pte) || pte_hw_dirty(pte)) #define pte_valid(pte) (!!(pte_val(pte) & PTE_VALID)) -#define pte_valid_user(pte) \ - ((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER)) #define pte_valid_not_user(pte) \ ((pte_val(pte) & (PTE_VALID | PTE_USER)) == PTE_VALID) #define pte_valid_young(pte) \ @@ -278,13 +277,13 @@ extern void __sync_icache_dcache(pte_t pteval, unsigned long addr); static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) { - if (pte_valid_user(pte)) { - if (!pte_special(pte) && pte_exec(pte)) - __sync_icache_dcache(pte, addr); + if (pte_valid(pte)) { if (pte_sw_dirty(pte) && pte_write(pte)) pte_val(pte) &= ~PTE_RDONLY; else pte_val(pte) |= PTE_RDONLY; + if (pte_user(pte) && pte_exec(pte) && !pte_special(pte)) + __sync_icache_dcache(pte, addr); } /* diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index ffe9c2b6431b..917d98108b3f 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -514,9 +514,14 @@ CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems #endif /* EL2 debug */ + mrs x0, id_aa64dfr0_el1 // Check ID_AA64DFR0_EL1 PMUVer + sbfx x0, x0, #8, #4 + cmp x0, #1 + b.lt 4f // Skip if no PMU present mrs x0, pmcr_el0 // Disable debug access traps ubfx x0, x0, #11, #5 // to EL2 and allow access to msr mdcr_el2, x0 // all PMU counters from EL1 +4: /* Stage-2 translation */ msr vttbr_el2, xzr diff --git a/arch/arm64/kernel/image.h b/arch/arm64/kernel/image.h index bc2abb8b1599..999633bd7294 100644 --- a/arch/arm64/kernel/image.h +++ b/arch/arm64/kernel/image.h @@ -65,6 +65,16 @@ #ifdef CONFIG_EFI /* + * Prevent the symbol aliases below from being emitted into the kallsyms + * table, by forcing them to be absolute symbols (which are conveniently + * ignored by scripts/kallsyms) rather than section relative symbols. + * The distinction is only relevant for partial linking, and only for symbols + * that are defined within a section declaration (which is not the case for + * the definitions below) so the resulting values will be identical. + */ +#define KALLSYMS_HIDE(sym) ABSOLUTE(sym) + +/* * The EFI stub has its own symbol namespace prefixed by __efistub_, to * isolate it from the kernel proper. The following symbols are legally * accessed by the stub, so provide some aliases to make them accessible. @@ -73,25 +83,25 @@ * linked at. The routines below are all implemented in assembler in a * position independent manner */ -__efistub_memcmp = __pi_memcmp; -__efistub_memchr = __pi_memchr; -__efistub_memcpy = __pi_memcpy; -__efistub_memmove = __pi_memmove; -__efistub_memset = __pi_memset; -__efistub_strlen = __pi_strlen; -__efistub_strcmp = __pi_strcmp; -__efistub_strncmp = __pi_strncmp; -__efistub___flush_dcache_area = __pi___flush_dcache_area; +__efistub_memcmp = KALLSYMS_HIDE(__pi_memcmp); +__efistub_memchr = KALLSYMS_HIDE(__pi_memchr); +__efistub_memcpy = KALLSYMS_HIDE(__pi_memcpy); +__efistub_memmove = KALLSYMS_HIDE(__pi_memmove); +__efistub_memset = KALLSYMS_HIDE(__pi_memset); +__efistub_strlen = KALLSYMS_HIDE(__pi_strlen); +__efistub_strcmp = KALLSYMS_HIDE(__pi_strcmp); +__efistub_strncmp = KALLSYMS_HIDE(__pi_strncmp); +__efistub___flush_dcache_area = KALLSYMS_HIDE(__pi___flush_dcache_area); #ifdef CONFIG_KASAN -__efistub___memcpy = __pi_memcpy; -__efistub___memmove = __pi_memmove; -__efistub___memset = __pi_memset; +__efistub___memcpy = KALLSYMS_HIDE(__pi_memcpy); +__efistub___memmove = KALLSYMS_HIDE(__pi_memmove); +__efistub___memset = KALLSYMS_HIDE(__pi_memset); #endif -__efistub__text = _text; -__efistub__end = _end; -__efistub__edata = _edata; +__efistub__text = KALLSYMS_HIDE(_text); +__efistub__end = KALLSYMS_HIDE(_end); +__efistub__edata = KALLSYMS_HIDE(_edata); #endif diff --git a/arch/arm64/mm/dump.c b/arch/arm64/mm/dump.c index 5a22a119a74c..0adbebbc2803 100644 --- a/arch/arm64/mm/dump.c +++ b/arch/arm64/mm/dump.c @@ -46,7 +46,7 @@ enum address_markers_idx { PCI_START_NR, PCI_END_NR, MODULES_START_NR, - MODUELS_END_NR, + MODULES_END_NR, KERNEL_SPACE_NR, }; diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c index cf038c7d9fa9..cab7a5be40aa 100644 --- a/arch/arm64/mm/kasan_init.c +++ b/arch/arm64/mm/kasan_init.c @@ -120,6 +120,7 @@ static void __init cpu_set_ttbr1(unsigned long ttbr1) void __init kasan_init(void) { struct memblock_region *reg; + int i; /* * We are going to perform proper setup of shadow memory. @@ -155,6 +156,14 @@ void __init kasan_init(void) pfn_to_nid(virt_to_pfn(start))); } + /* + * KAsan may reuse the contents of kasan_zero_pte directly, so we + * should make sure that it maps the zero page read-only. + */ + for (i = 0; i < PTRS_PER_PTE; i++) + set_pte(&kasan_zero_pte[i], + pfn_pte(virt_to_pfn(kasan_zero_page), PAGE_KERNEL_RO)); + memset(kasan_zero_page, 0, PAGE_SIZE); cpu_set_ttbr1(__pa(swapper_pg_dir)); flush_tlb_all(); diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c index 3571c7309c5e..0795c3a36d8f 100644 --- a/arch/arm64/mm/pageattr.c +++ b/arch/arm64/mm/pageattr.c @@ -14,6 +14,7 @@ #include <linux/mm.h> #include <linux/module.h> #include <linux/sched.h> +#include <linux/vmalloc.h> #include <asm/pgtable.h> #include <asm/tlbflush.h> @@ -44,6 +45,7 @@ static int change_memory_common(unsigned long addr, int numpages, unsigned long end = start + size; int ret; struct page_change_data data; + struct vm_struct *area; if (!PAGE_ALIGNED(addr)) { start &= PAGE_MASK; @@ -51,11 +53,27 @@ static int change_memory_common(unsigned long addr, int numpages, WARN_ON_ONCE(1); } - if (start < MODULES_VADDR || start >= MODULES_END) + /* + * Kernel VA mappings are always live, and splitting live section + * mappings into page mappings may cause TLB conflicts. This means + * we have to ensure that changing the permission bits of the range + * we are operating on does not result in such splitting. + * + * Let's restrict ourselves to mappings created by vmalloc (or vmap). + * Those are guaranteed to consist entirely of page mappings, and + * splitting is never needed. + * + * So check whether the [addr, addr + size) interval is entirely + * covered by precisely one VM area that has the VM_ALLOC flag set. + */ + area = find_vm_area((void *)addr); + if (!area || + end > (unsigned long)area->addr + area->size || + !(area->flags & VM_ALLOC)) return -EINVAL; - if (end < MODULES_VADDR || end >= MODULES_END) - return -EINVAL; + if (!numpages) + return 0; data.set_mask = set_mask; data.clear_mask = clear_mask; diff --git a/arch/arm64/mm/proc-macros.S b/arch/arm64/mm/proc-macros.S index 146bd99a7532..e6a30e1268a8 100644 --- a/arch/arm64/mm/proc-macros.S +++ b/arch/arm64/mm/proc-macros.S @@ -84,3 +84,15 @@ b.lo 9998b dsb \domain .endm + +/* + * reset_pmuserenr_el0 - reset PMUSERENR_EL0 if PMUv3 present + */ + .macro reset_pmuserenr_el0, tmpreg + mrs \tmpreg, id_aa64dfr0_el1 // Check ID_AA64DFR0_EL1 PMUVer + sbfx \tmpreg, \tmpreg, #8, #4 + cmp \tmpreg, #1 // Skip if no PMU present + b.lt 9000f + msr pmuserenr_el0, xzr // Disable PMU access from EL0 +9000: + .endm diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index a3d867e723b4..c164d2cb35c0 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -117,7 +117,7 @@ ENTRY(cpu_do_resume) */ ubfx x11, x11, #1, #1 msr oslar_el1, x11 - msr pmuserenr_el0, xzr // Disable PMU access from EL0 + reset_pmuserenr_el0 x0 // Disable PMU access from EL0 mov x0, x12 dsb nsh // Make sure local tlb invalidation completed isb @@ -154,7 +154,7 @@ ENTRY(__cpu_setup) msr cpacr_el1, x0 // Enable FP/ASIMD mov x0, #1 << 12 // Reset mdscr_el1 and disable msr mdscr_el1, x0 // access to the DCC from EL0 - msr pmuserenr_el0, xzr // Disable PMU access from EL0 + reset_pmuserenr_el0 x0 // Disable PMU access from EL0 /* * Memory region attributes for LPAE: * |