diff options
Diffstat (limited to 'arch/arm')
153 files changed, 762 insertions, 464 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index f9da41921c52..940b20178107 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -597,6 +597,8 @@ __common_mmu_cache_on: sub pc, lr, r0, lsr #32 @ properly flush pipeline #endif +#define PROC_ENTRY_SIZE (4*5) + /* * Here follow the relocatable cache support functions for the * various processors. This is a generic hook for locating an @@ -624,7 +626,7 @@ call_cache_fn: adr r12, proc_types ARM( addeq pc, r12, r3 ) @ call cache function THUMB( addeq r12, r3 ) THUMB( moveq pc, r12 ) @ call cache function - add r12, r12, #4*5 + add r12, r12, #PROC_ENTRY_SIZE b 1b /* @@ -691,9 +693,9 @@ proc_types: .word 0x41069260 @ ARM926EJ-S (v5TEJ) .word 0xff0ffff0 - b __arm926ejs_mmu_cache_on - b __armv4_mmu_cache_off - b __armv5tej_mmu_cache_flush + W(b) __arm926ejs_mmu_cache_on + W(b) __armv4_mmu_cache_off + W(b) __armv5tej_mmu_cache_flush .word 0x00007000 @ ARM7 IDs .word 0x0000f000 @@ -794,6 +796,16 @@ proc_types: .size proc_types, . - proc_types + /* + * If you get a "non-constant expression in ".if" statement" + * error from the assembler on this line, check that you have + * not accidentally written a "b" instruction where you should + * have written W(b). + */ + .if (. - proc_types) % PROC_ENTRY_SIZE != 0 + .error "The size of one or more proc_types entries is wrong." + .endif + /* * Turn off the Cache and MMU. ARMv3 does not support * reading the control register, but ARMv4 does. diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index e5681636626f..841df7d21c2f 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -255,7 +255,7 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, if (buf == 0) { dev_err(dev, "%s: unable to map unsafe buffer %p!\n", __func__, ptr); - return 0; + return ~0; } dev_dbg(dev, diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 889922ad229c..67b5abb6f857 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -157,7 +157,7 @@ CONFIG_LEDS_GPIO=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_XFS_FS=m diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig index 316af5479d90..9c0ad7993986 100644 --- a/arch/arm/configs/netx_defconfig +++ b/arch/arm/configs/netx_defconfig @@ -60,7 +60,7 @@ CONFIG_FB_ARMCLCD=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 8b0c717378fa..1d01ddd33122 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -142,7 +142,7 @@ CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=m CONFIG_RTC_DRV_SA1100=m CONFIG_EXT2_FS=m diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig index 5b5504143647..721832ffe2d7 100644 --- a/arch/arm/configs/xcep_defconfig +++ b/arch/arm/configs/xcep_defconfig @@ -73,7 +73,7 @@ CONFIG_SENSORS_MAX6650=m # CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_SA1100=m CONFIG_DMADEVICES=y # CONFIG_DNOTIFY is not set diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 960f65514d88..59577ad3f4ef 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -158,7 +158,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_LEDS_TRIGGER_BACKLIGHT=m CONFIG_LEDS_TRIGGER_GPIO=m CONFIG_LEDS_TRIGGER_DEFAULT_ON=m -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_ISL1208=m CONFIG_RTC_DRV_PXA=m CONFIG_EXT2_FS=y diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index bc2d2d75f706..65c3f2474f5e 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -13,6 +13,9 @@ * Do not include any C declarations in this file - it is included by * assembler source. */ +#ifndef __ASM_ASSEMBLER_H__ +#define __ASM_ASSEMBLER_H__ + #ifndef __ASSEMBLY__ #error "Only include this from assembly code" #endif @@ -290,3 +293,4 @@ .macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort .endm +#endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S index ec0bbf79c71f..2da8547de6d6 100644 --- a/arch/arm/include/asm/entry-macro-multi.S +++ b/arch/arm/include/asm/entry-macro-multi.S @@ -1,3 +1,5 @@ +#include <asm/assembler.h> + /* * Interrupt handling. Preserves r7, r8, r9 */ diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index a701e4226a6c..0cdd7b456cb2 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -76,6 +76,9 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) unsigned long dt_root; const char *model; + if (!dt_phys) + return NULL; + devtree = phys_to_virt(dt_phys); /* check device tree validity */ diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index e8d885676807..90c62cd51ca9 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -435,6 +435,10 @@ __irq_usr: usr_entry kuser_cmpxchg_check +#ifdef CONFIG_IRQSOFF_TRACER + bl trace_hardirqs_off +#endif + get_thread_info tsk #ifdef CONFIG_PREEMPT ldr r8, [tsk, #TI_PREEMPT] @ get preempt count @@ -453,7 +457,7 @@ __irq_usr: #endif mov why, #0 - b ret_to_user + b ret_to_user_from_irq UNWIND(.fnend ) ENDPROC(__irq_usr) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 1e7b04a40a31..b2a27b6b0046 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -64,6 +64,7 @@ work_resched: ENTRY(ret_to_user) ret_slow_syscall: disable_irq @ disable interrupts +ENTRY(ret_to_user_from_irq) ldr r1, [tsk, #TI_FLAGS] tst r1, #_TIF_WORK_MASK bne work_pending @@ -75,6 +76,7 @@ no_work_pending: arch_ret_to_user r1, lr restore_user_regs fast = 0, offset = 0 +ENDPROC(ret_to_user_from_irq) ENDPROC(ret_to_user) /* diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index fee7c36349eb..016d6a0830a3 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -193,8 +193,17 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, offset -= 0x02000000; offset += sym->st_value - loc; - /* only Thumb addresses allowed (no interworking) */ - if (!(offset & 1) || + /* + * For function symbols, only Thumb addresses are + * allowed (no interworking). + * + * For non-function symbols, the destination + * has no specific ARM/Thumb disposition, so + * the branch is resolved under the assumption + * that interworking is not required. + */ + if ((ELF32_ST_TYPE(sym->st_info) == STT_FUNC && + !(offset & 1)) || offset <= (s32)0xff000000 || offset >= (s32)0x01000000) { pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index d53c0abc4dd3..2b5b1421596c 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -583,7 +583,7 @@ static int armpmu_event_init(struct perf_event *event) static void armpmu_enable(struct pmu *pmu) { /* Enable all of the perf events on hardware. */ - int idx; + int idx, enabled = 0; struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); if (!armpmu) @@ -596,9 +596,11 @@ static void armpmu_enable(struct pmu *pmu) continue; armpmu->enable(&event->hw, idx); + enabled = 1; } - armpmu->start(); + if (enabled) + armpmu->start(); } static void armpmu_disable(struct pmu *pmu) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index ed11fb08b05a..acbb447ac6b5 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -73,6 +73,7 @@ __setup("fpe=", fpe_setup); #endif extern void paging_init(struct machine_desc *desc); +extern void sanity_check_meminfo(void); extern void reboot_setup(char *str); unsigned int processor_id; @@ -900,6 +901,7 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); + sanity_check_meminfo(); arm_memblock_init(&meminfo, mdesc); paging_init(mdesc); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 344e52b16c8c..e7f92a4321f3 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -318,9 +318,13 @@ asmlinkage void __cpuinit secondary_start_kernel(void) smp_store_cpu_info(cpu); /* - * OK, now it's safe to let the boot CPU continue + * OK, now it's safe to let the boot CPU continue. Wait for + * the CPU migration code to notice that the CPU is online + * before we continue. */ set_cpu_online(cpu, true); + while (!cpu_active(cpu)) + cpu_relax(); /* * OK, it's off to the idle thread for us diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 60636f499cb3..2c277d40cee6 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -115,7 +115,7 @@ static void __cpuinit twd_calibrate_rate(void) twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5); printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000, - (twd_timer_rate / 1000000) % 100); + (twd_timer_rate / 10000) % 100); } } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index d52eec268b47..6807cb1e76dd 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -139,7 +139,7 @@ static void dump_instr(const char *lvl, struct pt_regs *regs) fs = get_fs(); set_fs(KERNEL_DS); - for (i = -4; i < 1; i++) { + for (i = -4; i < 1 + !!thumb; i++) { unsigned int val, bad; if (thumb) @@ -563,7 +563,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) if (!pmd_present(*pmd)) goto bad_access; pte = pte_offset_map_lock(mm, pmd, addr, &ptl); - if (!pte_present(*pte) || !pte_dirty(*pte)) { + if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) { pte_unmap_unlock(pte, ptl); goto bad_access; } diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 17fae4a42ab5..f1013d08bb57 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -223,15 +223,15 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index cd850ed6f335..dba0d8d8a4bd 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -1220,7 +1220,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91cap9_set_console_clock(portnr); + at91cap9_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index b228ce9e21a1..83a1a3fee554 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -199,9 +199,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index a0ba475be04c..7227755ffec6 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1135,7 +1135,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91rm9200_set_console_clock(portnr); + at91rm9200_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 1fdeb9058a76..39f81f47b4ba 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -1173,7 +1173,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9260_set_console_clock(portnr); + at91sam9260_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 3eb4538fceeb..5004bf0a05f2 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -1013,7 +1013,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9261_set_console_clock(portnr); + at91sam9261_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ffe081b77ed0..a050f41fc860 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -1395,7 +1395,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9263_set_console_clock(portnr); + at91sam9263_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 2bb6ff9af1c7..11e214121b23 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -217,11 +217,11 @@ static struct clk *periph_clocks[] __initdata = { static struct clk_lookup periph_clocks_lookups[] = { /* One additional fake clock for ohci */ CLKDEV_CON_ID("ohci_clk", &uhphs_clk), - CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk), - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 05674865bc21..600bffb01edb 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1550,7 +1550,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9g45_set_console_clock(portnr); + at91sam9g45_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 1a40f16b66c8..29dff18ed130 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -191,8 +191,8 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index c296045f2b6a..aacb19dc9225 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -1168,7 +1168,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9rl_set_console_clock(portnr); + at91sam9rl_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 1904fdf87613..cdb65d483250 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -215,7 +215,7 @@ static void __init cap9adk_add_device_nand(void) csa = at91_sys_read(AT91_MATRIX_EBICSA); at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); - cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit(); + cap9adk_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (cap9adk_nand_data.bus_width_16) cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index d600dc123227..5c240743c5b7 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -214,7 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index f897f84d43dc..b60c22b6e241 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -220,7 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 605b26f40a4c..9bbdc92ea194 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -221,7 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 7624cf0d006b..1325a50101a8 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -198,7 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 063c95d0e8f0..33eaa135f248 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -178,7 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h index b855ee75f72c..8f4866045b41 100644 --- a/arch/arm/mach-at91/include/mach/system_rev.h +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -13,13 +13,13 @@ * the 16-31 bit are reserved for at91 generic information * * bit 31: - * 0 => nand 16 bit - * 1 => nand 8 bit + * 0 => nand 8 bit + * 1 => nand 16 bit */ -#define BOARD_HAVE_NAND_8BIT (1 << 31) -static int inline board_have_nand_8bit(void) +#define BOARD_HAVE_NAND_16BIT (1 << 31) +static inline int board_have_nand_16bit(void) { - return system_rev & BOARD_HAVE_NAND_8BIT; + return system_rev & BOARD_HAVE_NAND_16BIT; } #endif /* __ARCH_SYSTEM_REV_H__ */ diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index c67f684ee3e5..09a87e61ffcf 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -520,7 +520,7 @@ fail: */ if (have_imager()) { label = "HD imager"; - mux |= 1; + mux |= 2; /* externally mux MMC1/ENET/AIC33 to imager */ mux |= BIT(6) | BIT(5) | BIT(3); @@ -540,7 +540,7 @@ fail: resets &= ~BIT(1); if (have_tvp7002()) { - mux |= 2; + mux |= 1; resets &= ~BIT(2); label = "tvp7002 HD"; } else { diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 4e66881c7aee..fc4e98ea7543 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -494,7 +494,7 @@ static struct platform_device da850_mcasp_device = { .resource = da850_mcasp_resources, }; -struct platform_device davinci_pcm_device = { +static struct platform_device davinci_pcm_device = { .name = "davinci-pcm-audio", .id = -1, }; diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 8f4f736aa267..806a2f02b980 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -298,7 +298,7 @@ static void davinci_init_wdt(void) /*-------------------------------------------------------------------------*/ -struct platform_device davinci_pcm_device = { +static struct platform_device davinci_pcm_device = { .name = "davinci-pcm-audio", .id = -1, }; diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index a0b838894ac9..cafbe13a82a5 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -252,8 +252,12 @@ static struct irq_chip gpio_irqchip = { static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) { - struct davinci_gpio_regs __iomem *g = irq2regs(irq); + struct davinci_gpio_regs __iomem *g; u32 mask = 0xffff; + struct davinci_gpio_controller *d; + + d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc); + g = (struct davinci_gpio_regs __iomem *)d->regs; /* we only care about one bank */ if (irq & 1) @@ -272,11 +276,14 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) if (!status) break; __raw_writel(status, &g->intstat); - if (irq & 1) - status >>= 16; /* now demux them to the right lowlevel handler */ - n = (int)irq_get_handler_data(irq); + n = d->irq_base; + if (irq & 1) { + n += 16; + status >>= 16; + } + while (status) { res = ffs(status); n += res; @@ -422,8 +429,13 @@ static int __init davinci_gpio_irq_setup(void) /* set up all irqs in this bank */ irq_set_chained_handler(bank_irq, gpio_irq_handler); - irq_set_chip_data(bank_irq, (__force void *)g); - irq_set_handler_data(bank_irq, (void *)irq); + + /* + * Each chip handles 32 gpios, and each irq bank consists of 16 + * gpio irqs. Pass the irq bank's corresponding controller to + * the chained irq handler. + */ + irq_set_handler_data(bank_irq, &chips[gpio / 32]); for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { irq_set_chip(irq, &gpio_irqchip); diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index bfe68ec4e1a6..952dc126c390 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -52,8 +52,14 @@ davinci_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) struct irq_chip_type *ct; gc = irq_alloc_generic_chip("AINTC", 1, irq_start, base, handle_edge_irq); + if (!gc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n", + __func__, irq_start); + return; + } + ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 82079545adc4..6659a0d137a3 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -251,9 +251,9 @@ static void ep93xx_uart_set_mctrl(struct amba_device *dev, unsigned int mcr; mcr = 0; - if (!(mctrl & TIOCM_RTS)) + if (mctrl & TIOCM_RTS) mcr |= 2; - if (!(mctrl & TIOCM_DTR)) + if (mctrl & TIOCM_DTR) mcr |= 1; __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET); @@ -402,11 +402,15 @@ static struct resource ep93xx_eth_resource[] = { } }; +static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32); + static struct platform_device ep93xx_eth_device = { .name = "ep93xx-eth", .id = -1, .dev = { - .platform_data = &ep93xx_eth_data, + .platform_data = &ep93xx_eth_data, + .coherent_dma_mask = DMA_BIT_MASK(32), + .dma_mask = &ep93xx_eth_dma_mask, }, .num_resources = ARRAY_SIZE(ep93xx_eth_resource), .resource = ep93xx_eth_resource, diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index b92c1e557145..1435fc31c4b2 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC help Common setup code for the camera interfaces. +config EXYNOS4_SETUP_USB_PHY + bool + help + Common setup code for USB PHY controller + # machine support menu "EXYNOS4 Machines" @@ -176,6 +181,7 @@ config MACH_NURI select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY select SAMSUNG_DEV_PWM help Machine support for Samsung Mobile NURI Board. diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index a9bb94fabaa7..60fe5ecf3599 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -56,4 +56,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o -obj-$(CONFIG_USB_SUPPORT) += usb-phy.o +obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index 08813a6f66b1..bfd621460abf 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -23,6 +23,7 @@ #include <plat/sdhci.h> #include <plat/devs.h> #include <plat/fimc-core.h> +#include <plat/iic-core.h> #include <mach/regs-irq.h> @@ -98,7 +99,7 @@ static struct map_desc exynos4_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_USB_HSPHY, + .virtual = (unsigned long)S3C_VA_USB_HSPHY, .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY), .length = SZ_4K, .type = MT_DEVICE, @@ -132,6 +133,11 @@ void __init exynos4_map_io(void) s3c_fimc_setname(1, "exynos4-fimc"); s3c_fimc_setname(2, "exynos4-fimc"); s3c_fimc_setname(3, "exynos4-fimc"); + + /* The I2C bus controllers are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); + s3c_i2c2_setname("s3c2440-i2c"); } void __init exynos4_init_clocks(int xtal) diff --git a/arch/arm/mach-exynos4/dev-audio.c b/arch/arm/mach-exynos4/dev-audio.c index 1eed5f9f7bd3..983069a53239 100644 --- a/arch/arm/mach-exynos4/dev-audio.c +++ b/arch/arm/mach-exynos4/dev-audio.c @@ -330,7 +330,7 @@ struct platform_device exynos4_device_ac97 = { static int exynos4_spdif_cfg_gpio(struct platform_device *pdev) { - s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4)); return 0; } diff --git a/arch/arm/mach-exynos4/headsmp.S b/arch/arm/mach-exynos4/headsmp.S index 6c6cfc50c46b..3cdeb3647542 100644 --- a/arch/arm/mach-exynos4/headsmp.S +++ b/arch/arm/mach-exynos4/headsmp.S @@ -13,7 +13,7 @@ #include <linux/linkage.h> #include <linux/init.h> - __INIT + __CPUINIT /* * exynos4 specific entry point for secondary CPUs. This provides diff --git a/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h b/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h index 703118d5173c..c337cf3a71bf 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h +++ b/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h @@ -11,7 +11,7 @@ #ifndef __PLAT_S5P_REGS_USB_PHY_H #define __PLAT_S5P_REGS_USB_PHY_H -#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S5P_VA_USB_HSPHY) +#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY) #define EXYNOS4_PHYPWR EXYNOS4_HSOTG_PHYREG(0x00) #define PHY1_HSIC_NORMAL_MASK (0xf << 9) diff --git a/arch/arm/mach-exynos4/init.c b/arch/arm/mach-exynos4/init.c index cf91f50e43ab..a8a83e3881a4 100644 --- a/arch/arm/mach-exynos4/init.c +++ b/arch/arm/mach-exynos4/init.c @@ -35,6 +35,7 @@ void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) tcfg->clocks = exynos4_serial_clocks; tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks); } + tcfg->flags |= NO_NEED_CHECK_CLKSRC; } s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index 152676471b67..edd814110da8 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -78,9 +78,7 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { }; static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK0(2), - .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_INTERNAL, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, #ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT .max_width = 8, @@ -96,9 +94,7 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = { }; static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK2(2), - .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_INTERNAL, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, #ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT .max_width = 8, diff --git a/arch/arm/mach-exynos4/usb-phy.c b/arch/arm/mach-exynos4/setup-usb-phy.c index 0883c1b824b9..0883c1b824b9 100644 --- a/arch/arm/mach-exynos4/usb-phy.c +++ b/arch/arm/mach-exynos4/setup-usb-phy.c diff --git a/arch/arm/mach-exynos4/time.c b/arch/arm/mach-exynos4/time.c index 86b9fa0d3639..ebb8f38d5405 100644 --- a/arch/arm/mach-exynos4/time.c +++ b/arch/arm/mach-exynos4/time.c @@ -206,6 +206,7 @@ static cycle_t exynos4_pwm4_read(struct clocksource *cs) return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40)); } +#ifdef CONFIG_PM static void exynos4_pwm4_resume(struct clocksource *cs) { unsigned long pclk; @@ -218,6 +219,7 @@ static void exynos4_pwm4_resume(struct clocksource *cs) exynos4_pwm_init(4, ~0); exynos4_pwm_start(4, 1); } +#endif struct clocksource pwm_clocksource = { .name = "pwm_timer4", diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index 5f1f9867fc70..121ad1d4fa39 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -103,6 +103,7 @@ static void __init footbridge_timer_init(void) clockevents_calc_mult_shift(ce, mem_fclk_21285, 5); ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce); ce->min_delta_ns = clockevent_delta2ns(0x000004, ce); + ce->cpumask = cpumask_of(smp_processor_id()); clockevents_register_device(ce); } diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index 30b971d65815..1be2eeb7a0a0 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -26,6 +26,7 @@ #include <asm/hardware/debug-8250.S> #else +#include <mach/hardware.h> /* For EBSA285 debugging */ .equ dc21285_high, ARMCSR_BASE & 0xff000000 .equ dc21285_low, ARMCSR_BASE & 0x00ffffff @@ -36,8 +37,8 @@ .else mov \rp, #0 .endif - orr \rv, \rp, #0x42000000 - orr \rp, \rp, #dc21285_high + orr \rv, \rp, #dc21285_high + orr \rp, \rp, #0x42000000 .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-h720x/Kconfig b/arch/arm/mach-h720x/Kconfig index 9b6982efbd22..abf356c02343 100644 --- a/arch/arm/mach-h720x/Kconfig +++ b/arch/arm/mach-h720x/Kconfig @@ -6,12 +6,14 @@ config ARCH_H7201 bool "gms30c7201" depends on ARCH_H720X select CPU_H7201 + select ZONE_DMA help Say Y here if you are using the Hynix GMS30C7201 Reference Board config ARCH_H7202 bool "hms30c7202" select CPU_H7202 + select ZONE_DMA depends on ARCH_H720X help Say Y here if you are using the Hynix HMS30C7202 Reference Board diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 74ed81a3cb1a..07772575d7ab 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -419,14 +419,20 @@ static void notrace ixp4xx_update_sched_clock(void) /* * clocksource */ + +static cycle_t ixp4xx_clocksource_read(struct clocksource *c) +{ + return *IXP4XX_OSTS; +} + unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; EXPORT_SYMBOL(ixp4xx_timer_freq); static void __init ixp4xx_clocksource_init(void) { init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq); - clocksource_mmio_init(&IXP4XX_OSTS, "OSTS", ixp4xx_timer_freq, 200, 32, - clocksource_mmio_readl_up); + clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32, + ixp4xx_clocksource_read); } /* diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 72b4e7631583..ab9f999106c7 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -79,7 +79,7 @@ static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); static APBC_CLK(keypad, PXA168_KPC, 0, 32000); -static APMU_CLK(nand, NAND, 0x01db, 208000000); +static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(lcd, LCD, 0x7f, 312000000); /* device and clock bindings */ diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 8f92ccd26edf..1464607aa60d 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -110,7 +110,7 @@ static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000); static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000); static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000); -static APMU_CLK(nand, NAND, 0x01db, 208000000); +static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(u2o, USB, 0x1b, 480000000); /* device and clock bindings */ diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 38b95e949d13..63621f152c98 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -23,6 +23,8 @@ #include <linux/io.h> #include <asm/mach/time.h> +#include <asm/hardware/gic.h> + #include <mach/msm_iomap.h> #include <mach/cpu.h> @@ -55,10 +57,12 @@ enum timer_location { #if defined(CONFIG_ARCH_QSD8X50) #define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */ #define MSM_DGT_SHIFT (0) -#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) || \ - defined(CONFIG_ARCH_MSM8960) +#elif defined(CONFIG_ARCH_MSM7X30) #define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */ #define MSM_DGT_SHIFT (0) +#elif defined(CONFIG_ARCH_MSM8X60) || defined(CONFIG_ARCH_MSM8960) +#define DGT_HZ (27000000 / 4) /* 27 MHz (PXO) / 4 by default */ +#define MSM_DGT_SHIFT (0) #else #define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */ #define MSM_DGT_SHIFT (5) @@ -100,7 +104,11 @@ static cycle_t msm_read_timer_count(struct clocksource *cs) { struct msm_clock *clk = container_of(cs, struct msm_clock, clocksource); - return readl(clk->global_counter); + /* + * Shift timer count down by a constant due to unreliable lower bits + * on some targets. + */ + return readl(clk->global_counter) >> clk->shift; } static struct msm_clock *clockevent_to_clock(struct clock_event_device *evt) diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c index 65157a35dbba..54add60f94c9 100644 --- a/arch/arm/mach-mxs/ocotp.c +++ b/arch/arm/mach-mxs/ocotp.c @@ -16,6 +16,8 @@ #include <linux/err.h> #include <linux/mutex.h> +#include <asm/processor.h> /* for cpu_relax() */ + #include <mach/mxs.h> #define OCOTP_WORD_OFFSET 0x20 diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index af98117043d2..5b114d1558c8 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -4,14 +4,14 @@ # Common support obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o -obj-y += clock.o clock_data.o opp_data.o reset.o +obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o # Power Management -obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o +obj-$(CONFIG_PM) += pm.o sleep.o # DSP obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index de88c9297b68..f49ce85d2448 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -215,7 +215,7 @@ static struct omap_kp_platform_data ams_delta_kp_data __initdata = { .delay = 9, }; -static struct platform_device ams_delta_kp_device __initdata = { +static struct platform_device ams_delta_kp_device = { .name = "omap-keypad", .id = -1, .dev = { @@ -225,12 +225,12 @@ static struct platform_device ams_delta_kp_device __initdata = { .resource = ams_delta_kp_resources, }; -static struct platform_device ams_delta_lcd_device __initdata = { +static struct platform_device ams_delta_lcd_device = { .name = "lcd_ams_delta", .id = -1, }; -static struct platform_device ams_delta_led_device __initdata = { +static struct platform_device ams_delta_led_device = { .name = "ams-delta-led", .id = -1 }; @@ -267,7 +267,7 @@ static struct soc_camera_link ams_delta_iclink = { .power = ams_delta_camera_power, }; -static struct platform_device ams_delta_camera_device __initdata = { +static struct platform_device ams_delta_camera_device = { .name = "soc-camera-pdrv", .id = 0, .dev = { diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index d8559344c6e2..f5a52204b89f 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -284,14 +284,15 @@ static int __init omap1_system_dma_init(void) dma_base = ioremap(res[0].start, resource_size(&res[0])); if (!dma_base) { pr_err("%s: Unable to ioremap\n", __func__); - return -ENODEV; + ret = -ENODEV; + goto exit_device_put; } ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); if (ret) { dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n", __func__, pdev->name, pdev->id); - goto exit_device_del; + goto exit_device_put; } p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL); @@ -299,7 +300,7 @@ static int __init omap1_system_dma_init(void) dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n", __func__, pdev->name); ret = -ENOMEM; - goto exit_device_put; + goto exit_device_del; } d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL); @@ -380,10 +381,10 @@ exit_release_d: kfree(d); exit_release_p: kfree(p); -exit_device_put: - platform_device_put(pdev); exit_device_del: platform_device_del(pdev); +exit_device_put: + platform_device_put(pdev); return ret; } diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 04c4b04cf54e..364137c2042c 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -41,7 +41,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { .bank_stride = 1, }; -static struct __initdata platform_device omap15xx_mpu_gpio = { +static struct platform_device omap15xx_mpu_gpio = { .name = "omap_gpio", .id = 0, .dev = { @@ -70,7 +70,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = { .bank_width = 16, }; -static struct __initdata platform_device omap15xx_gpio = { +static struct platform_device omap15xx_gpio = { .name = "omap_gpio", .id = 1, .dev = { diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 5dd0d4c82b24..293a246e2824 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -44,7 +44,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { .bank_stride = 1, }; -static struct __initdata platform_device omap16xx_mpu_gpio = { +static struct platform_device omap16xx_mpu_gpio = { .name = "omap_gpio", .id = 0, .dev = { @@ -73,7 +73,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = { .bank_width = 16, }; -static struct __initdata platform_device omap16xx_gpio1 = { +static struct platform_device omap16xx_gpio1 = { .name = "omap_gpio", .id = 1, .dev = { @@ -102,7 +102,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = { .bank_width = 16, }; -static struct __initdata platform_device omap16xx_gpio2 = { +static struct platform_device omap16xx_gpio2 = { .name = "omap_gpio", .id = 2, .dev = { @@ -131,7 +131,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = { .bank_width = 16, }; -static struct __initdata platform_device omap16xx_gpio3 = { +static struct platform_device omap16xx_gpio3 = { .name = "omap_gpio", .id = 3, .dev = { @@ -160,7 +160,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = { .bank_width = 16, }; -static struct __initdata platform_device omap16xx_gpio4 = { +static struct platform_device omap16xx_gpio4 = { .name = "omap_gpio", .id = 4, .dev = { diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 1204c8b871af..c6ad248d63a6 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -46,7 +46,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { .bank_stride = 2, }; -static struct __initdata platform_device omap7xx_mpu_gpio = { +static struct platform_device omap7xx_mpu_gpio = { .name = "omap_gpio", .id = 0, .dev = { @@ -75,7 +75,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio1 = { +static struct platform_device omap7xx_gpio1 = { .name = "omap_gpio", .id = 1, .dev = { @@ -104,7 +104,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio2 = { +static struct platform_device omap7xx_gpio2 = { .name = "omap_gpio", .id = 2, .dev = { @@ -133,7 +133,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio3 = { +static struct platform_device omap7xx_gpio3 = { .name = "omap_gpio", .id = 3, .dev = { @@ -162,7 +162,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio4 = { +static struct platform_device omap7xx_gpio4 = { .name = "omap_gpio", .id = 4, .dev = { @@ -191,7 +191,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio5 = { +static struct platform_device omap7xx_gpio5 = { .name = "omap_gpio", .id = 5, .dev = { @@ -220,7 +220,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = { .bank_width = 32, }; -static struct __initdata platform_device omap7xx_gpio6 = { +static struct platform_device omap7xx_gpio6 = { .name = "omap_gpio", .id = 6, .dev = { diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c index fe31d933f0ed..334fb8871bc3 100644 --- a/arch/arm/mach-omap1/pm_bus.c +++ b/arch/arm/mach-omap1/pm_bus.c @@ -56,9 +56,13 @@ static struct dev_power_domain default_power_domain = { USE_PLATFORM_PM_SLEEP_OPS }, }; +#define OMAP1_PWR_DOMAIN (&default_power_domain) +#else +#define OMAP1_PWR_DOMAIN NULL +#endif /* CONFIG_PM_RUNTIME */ static struct pm_clk_notifier_block platform_bus_notifier = { - .pwr_domain = &default_power_domain, + .pwr_domain = OMAP1_PWR_DOMAIN, .con_ids = { "ick", "fck", NULL, }, }; @@ -72,4 +76,4 @@ static int __init omap1_pm_runtime_init(void) return 0; } core_initcall(omap1_pm_runtime_init); -#endif /* CONFIG_PM_RUNTIME */ + diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index d54969be0a54..5de6eac0a725 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -26,13 +26,13 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/gpio.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <plat/board.h> #include <plat/common.h> #include <plat/gpmc.h> diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index ae2963a98041..5dac974be625 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -622,19 +622,19 @@ static struct omap_device_pad serial3_pads[] __initdata = { OMAP_MUX_MODE0), }; -static struct omap_board_data serial1_data = { +static struct omap_board_data serial1_data __initdata = { .id = 0, .pads = serial1_pads, .pads_cnt = ARRAY_SIZE(serial1_pads), }; -static struct omap_board_data serial2_data = { +static struct omap_board_data serial2_data __initdata = { .id = 1, .pads = serial2_pads, .pads_cnt = ARRAY_SIZE(serial2_pads), }; -static struct omap_board_data serial3_data = { +static struct omap_board_data serial3_data __initdata = { .id = 2, .pads = serial3_pads, .pads_cnt = ARRAY_SIZE(serial3_pads), diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 73fa90bb6953..63de2d396e2d 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -258,7 +258,7 @@ static struct gpio sdp4430_eth_gpios[] __initdata = { { ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" }, }; -static int omap_ethernet_init(void) +static int __init omap_ethernet_init(void) { int status; @@ -322,6 +322,7 @@ static struct omap2_hsmmc_info mmc[] = { .gpio_wp = -EINVAL, .nonremovable = true, .ocr_mask = MMC_VDD_29_30, + .no_off_init = true, }, { .mmc = 1, @@ -681,19 +682,19 @@ static struct omap_device_pad serial4_pads[] __initdata = { OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), }; -static struct omap_board_data serial2_data = { +static struct omap_board_data serial2_data __initdata = { .id = 1, .pads = serial2_pads, .pads_cnt = ARRAY_SIZE(serial2_pads), }; -static struct omap_board_data serial3_data = { +static struct omap_board_data serial3_data __initdata = { .id = 2, .pads = serial3_pads, .pads_cnt = ARRAY_SIZE(serial3_pads), }; -static struct omap_board_data serial4_data = { +static struct omap_board_data serial4_data __initdata = { .id = 3, .pads = serial4_pads, .pads_cnt = ARRAY_SIZE(serial4_pads), @@ -729,7 +730,7 @@ static void __init omap_4430sdp_init(void) if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; - omap4_mux_init(board_mux, package); + omap4_mux_init(board_mux, NULL, package); omap_board_config = sdp4430_config; omap_board_config_size = ARRAY_SIZE(sdp4430_config); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index f3beb8eeef77..b124bdfb4239 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -27,13 +27,13 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/smc91x.h> +#include <linux/gpio.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <mach/gpio.h> #include <plat/led.h> #include <plat/usb.h> #include <plat/board.h> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index c63115bc1536..77456dec93ea 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -63,8 +63,6 @@ #define SB_T35_SMSC911X_CS 4 #define SB_T35_SMSC911X_GPIO 65 -#define NAND_BLOCK_SIZE SZ_128K - #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include <linux/smsc911x.h> #include <plat/gpmc-smsc911x.h> diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 08f08e812492..c3a9fd35034a 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -48,6 +48,7 @@ #include "mux.h" #include "control.h" +#include "common-board-devices.h" #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led cm_t3517_leds[] = { @@ -177,7 +178,7 @@ static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = { .reset_gpio_port[2] = -EINVAL, }; -static int cm_t3517_init_usbh(void) +static int __init cm_t3517_init_usbh(void) { int err; @@ -203,8 +204,6 @@ static inline int cm_t3517_init_usbh(void) #endif #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -#define NAND_BLOCK_SIZE SZ_128K - static struct mtd_partition cm_t3517_nand_partitions[] = { { .name = "xloader", diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index cf520d7dd614..34956ec83296 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -61,8 +61,6 @@ #include "timer-gp.h" #include "common-board-devices.h" -#define NAND_BLOCK_SIZE SZ_128K - #define OMAP_DM9000_GPIO_IRQ 25 #define OMAP3_DEVKIT_TS_GPIO 27 diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index be71426359f2..7f21d24bd437 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -54,8 +54,6 @@ #include "pm.h" #include "common-board-devices.h" -#define NAND_BLOCK_SIZE SZ_128K - /* * OMAP3 Beagle revision * Run time detection of Beagle revision is done by reading GPIO. @@ -106,6 +104,9 @@ static void __init omap3_beagle_init_rev(void) beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1) | (gpio_get_value(173) << 2); + gpio_free_array(omap3_beagle_rev_gpios, + ARRAY_SIZE(omap3_beagle_rev_gpios)); + switch (beagle_rev) { case 7: printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); @@ -579,6 +580,9 @@ static void __init omap3_beagle_init(void) omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions)); + /* Ensure msecure is mux'd to be able to set the RTC. */ + omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 1d10736c6d3c..23f71d40883e 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -30,6 +30,7 @@ #include <linux/leds.h> #include <linux/input.h> #include <linux/input/matrix_keypad.h> +#include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/mmc/host.h> #include <linux/mmc/card.h> @@ -41,7 +42,6 @@ #include <plat/board.h> #include <plat/common.h> -#include <mach/gpio.h> #include <mach/hardware.h> #include <plat/mcspi.h> #include <plat/usb.h> @@ -57,8 +57,6 @@ #define PANDORA_WIFI_NRESET_GPIO 23 #define OMAP3_PANDORA_TS_GPIO 94 -#define NAND_BLOCK_SIZE SZ_128K - static struct mtd_partition omap3pandora_nand_partitions[] = { { .name = "xloader", @@ -86,7 +84,8 @@ static struct mtd_partition omap3pandora_nand_partitions[] = { static struct omap_nand_platform_data pandora_nand_data = { .cs = 0, - .devsize = 1, /* '0' for 8-bit, '1' for 16-bit device */ + .devsize = NAND_BUSWIDTH_16, + .xfer_type = NAND_OMAP_PREFETCH_DMA, .parts = omap3pandora_nand_partitions, .nr_parts = ARRAY_SIZE(omap3pandora_nand_partitions), }; diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 82872d7d313b..5f649faf7377 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -56,8 +56,6 @@ #include <asm/setup.h> -#define NAND_BLOCK_SIZE SZ_128K - #define OMAP3_AC_GPIO 136 #define OMAP3_TS_GPIO 162 #define TB_BL_PWM_TIMER 9 diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 90485fced973..0cfe2005cb50 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -526,19 +526,19 @@ static struct omap_device_pad serial4_pads[] __initdata = { OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), }; -static struct omap_board_data serial2_data = { +static struct omap_board_data serial2_data __initdata = { .id = 1, .pads = serial2_pads, .pads_cnt = ARRAY_SIZE(serial2_pads), }; -static struct omap_board_data serial3_data = { +static struct omap_board_data serial3_data __initdata = { .id = 2, .pads = serial3_pads, .pads_cnt = ARRAY_SIZE(serial3_pads), }; -static struct omap_board_data serial4_data = { +static struct omap_board_data serial4_data __initdata = { .id = 3, .pads = serial4_pads, .pads_cnt = ARRAY_SIZE(serial4_pads), @@ -687,7 +687,7 @@ static void __init omap4_panda_init(void) if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; - omap4_mux_init(board_mux, package); + omap4_mux_init(board_mux, NULL, package); if (wl12xx_set_platform_data(&omap_panda_wlan_data)) pr_err("error setting wl12xx data\n"); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 1555918e3ffa..175e1ab2b04d 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -24,6 +24,7 @@ #include <linux/err.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/i2c/twl.h> @@ -45,7 +46,6 @@ #include <plat/common.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> -#include <mach/gpio.h> #include <plat/gpmc.h> #include <mach/hardware.h> #include <plat/nand.h> @@ -65,8 +65,6 @@ #define OVERO_GPIO_USBH_CPEN 168 #define OVERO_GPIO_USBH_NRESET 183 -#define NAND_BLOCK_SIZE SZ_128K - #define OVERO_SMSC911X_CS 5 #define OVERO_SMSC911X_GPIO 176 #define OVERO_SMSC911X2_CS 4 diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index f6247e71a194..88bd6f7705f0 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -488,6 +488,7 @@ static struct regulator_init_data rx51_vmmc2 = { .name = "V28_A", .min_uV = 2800000, .max_uV = 3000000, + .always_on = true, /* due VIO leak to AIC34 VDDs */ .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, @@ -557,7 +558,7 @@ static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = .subdev_board_info = &rx51_si4713_board_info, }; -static struct platform_device rx51_si4713_dev __initdata_or_module = { +static struct platform_device rx51_si4713_dev = { .name = "radio-si4713", .id = -1, .dev = { @@ -582,7 +583,7 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) { /* FIXME this gpio setup is just a placeholder for now */ gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm"); - gpio_request_one(gpio + 7, GPIOF_OUT_INIT_HIGH, "speaker_en"); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en"); return 0; } diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index c7c6beb1ec24..d4683ba5f721 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -26,7 +26,7 @@ static struct gpio zoom_lcd_gpios[] __initdata = { { LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" }, }; -static void zoom_lcd_panel_init(void) +static void __init zoom_lcd_panel_init(void) { zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? LCD_PANEL_RESET_GPIO_PROD : diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index e94903b2c65b..94ccf464677b 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -85,17 +85,17 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct spi_board_info *spi_bi = &ads7846_spi_board_info; int err; - err = gpio_request(gpio_pendown, "TS PenDown"); - if (err) { - pr_err("Could not obtain gpio for TS PenDown: %d\n", err); - return; - } - - gpio_direction_input(gpio_pendown); - gpio_export(gpio_pendown, 0); + if (board_pdata && board_pdata->get_pendown_state) { + err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); + if (err) { + pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); + return; + } + gpio_export(gpio_pendown, 0); - if (gpio_debounce) - gpio_set_debounce(gpio_pendown, gpio_debounce); + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); + } ads7846_config.gpio_pendown = gpio_pendown; diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index eb80b3b0ef47..679719051df5 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -1,6 +1,8 @@ #ifndef __OMAP_COMMON_BOARD_DEVICES__ #define __OMAP_COMMON_BOARD_DEVICES__ +#define NAND_BLOCK_SIZE SZ_128K + struct twl4030_platform_data; struct mtd_partition; diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 7b8558564591..5b8ca680ed93 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -97,7 +97,7 @@ static int __init omap4_l3_init(void) WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name); - return PTR_ERR(od); + return IS_ERR(od) ? PTR_ERR(od) : 0; } postcore_initcall(omap4_l3_init); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index b2f30bed5a20..66868c5d5a29 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -145,6 +145,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, int power_on, int vdd) { u32 reg; + unsigned long timeout; if (power_on) { reg = omap4_ctrl_pad_readl(control_pbias_offset); @@ -157,9 +158,15 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, OMAP4_MMC1_PWRDNZ_MASK | OMAP4_USBC1_ICUSB_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); - /* 4 microsec delay for comparator to generate an error*/ - udelay(4); - reg = omap4_ctrl_pad_readl(control_pbias_offset); + + timeout = jiffies + msecs_to_jiffies(5); + do { + reg = omap4_ctrl_pad_readl(control_pbias_offset); + if (!(reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK)) + break; + usleep_range(100, 200); + } while (!time_after(jiffies, timeout)); + if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) { pr_err("Pbias Voltage is not same as LDO\n"); /* Caution : On VMODE_ERROR Power Down MMC IO */ @@ -331,6 +338,9 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, if (c->no_off) mmc->slots[0].no_off = 1; + if (c->no_off_init) + mmc->slots[0].no_regulator_off_init = c->no_off_init; + if (c->vcc_aux_disable_is_sleep) mmc->slots[0].vcc_aux_disable_is_sleep = 1; diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index f119348827d4..f757e78d4d4f 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -18,6 +18,7 @@ struct omap2_hsmmc_info { bool nonremovable; /* Nonremovable e.g. eMMC */ bool power_saving; /* Try to sleep or power off when possible */ bool no_off; /* power_saving and power is not to go off */ + bool no_off_init; /* no power off when not in MMC sleep state */ bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */ int gpio_cd; /* or -EINVAL */ int gpio_wp; /* or -EINVAL */ diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index a4ab1e364313..c7fb22abc219 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -83,6 +83,9 @@ void omap_mux_write(struct omap_mux_partition *partition, u16 val, void omap_mux_write_array(struct omap_mux_partition *partition, struct omap_board_mux *board_mux) { + if (!board_mux) + return; + while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) { omap_mux_write(partition, board_mux->value, board_mux->reg_offset); @@ -906,7 +909,7 @@ static struct omap_mux *omap_mux_get_by_gpio( u16 omap_mux_get_gpio(int gpio) { struct omap_mux_partition *partition; - struct omap_mux *m; + struct omap_mux *m = NULL; list_for_each_entry(partition, &mux_partitions, node) { m = omap_mux_get_by_gpio(partition, gpio); diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 137f321c029f..2132308ad1e4 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -323,10 +323,12 @@ int omap3_mux_init(struct omap_board_mux *board_mux, int flags); /** * omap4_mux_init() - initialize mux system with board specific set - * @board_mux: Board specific mux table + * @board_subset: Board specific mux table + * @board_wkup_subset: Board specific mux table for wakeup instance * @flags: OMAP package type used for the board */ -int omap4_mux_init(struct omap_board_mux *board_mux, int flags); +int omap4_mux_init(struct omap_board_mux *board_subset, + struct omap_board_mux *board_wkup_subset, int flags); /** * omap_mux_init - private mux init function, do not call diff --git a/arch/arm/mach-omap2/mux44xx.c b/arch/arm/mach-omap2/mux44xx.c index 9a66445112ae..f5a74daab2ff 100644 --- a/arch/arm/mach-omap2/mux44xx.c +++ b/arch/arm/mach-omap2/mux44xx.c @@ -1309,7 +1309,8 @@ static struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = { #define omap4_wkup_cbl_cbs_ball NULL #endif -int __init omap4_mux_init(struct omap_board_mux *board_subset, int flags) +int __init omap4_mux_init(struct omap_board_mux *board_subset, + struct omap_board_mux *board_wkup_subset, int flags) { struct omap_ball *package_balls_core; struct omap_ball *package_balls_wkup = omap4_wkup_cbl_cbs_ball; @@ -1347,7 +1348,7 @@ int __init omap4_mux_init(struct omap_board_mux *board_subset, int flags) OMAP_MUX_GPIO_IN_MODE3, OMAP4_CTRL_MODULE_PAD_WKUP_MUX_PBASE, OMAP4_CTRL_MODULE_PAD_WKUP_MUX_SIZE, - omap4_wkup_muxmodes, NULL, board_subset, + omap4_wkup_muxmodes, NULL, board_wkup_subset, package_balls_wkup); return ret; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e03429453ce7..293fa6cd50e1 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1628,7 +1628,7 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), void *data) { struct omap_hwmod *temp_oh; - int ret; + int ret = 0; if (!fn) return -EINVAL; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index abc548a0c98d..e1c69ffe0f69 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -5109,7 +5109,7 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = { &omap44xx_iva_seq1_hwmod, /* kbd class */ -/* &omap44xx_kbd_hwmod, */ + &omap44xx_kbd_hwmod, /* mailbox class */ &omap44xx_mailbox_hwmod, diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index f47813edd951..58775e3c8476 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -56,8 +56,10 @@ int omap4430_phy_init(struct device *dev) /* Power down the phy */ __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF); - if (!dev) + if (!dev) { + iounmap(ctrl_base); return 0; + } phyclk = clk_get(dev, "ocp2scp_usb_phy_ick"); if (IS_ERR(phyclk)) { diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index a5a83b358ddd..e01da45c0537 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -189,7 +189,7 @@ static struct dentry *pm_dbg_dir; static int pm_dbg_init_done; -static int __init pm_dbg_init(void); +static int pm_dbg_init(void); enum { DEBUG_FILE_COUNTERS = 0, @@ -595,7 +595,7 @@ static int option_set(void *data, u64 val) DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n"); -static int __init pm_dbg_init(void) +static int pm_dbg_init(void) { int i; struct dentry *d; diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 87ae3129f4f7..b27544bcafcb 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -347,9 +347,9 @@ static int pxa2xx_mfp_suspend(void) if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) && (GPDR(i) & GPIO_bit(i))) { if (GPLR(i) & GPIO_bit(i)) - PGSR(i) |= GPIO_bit(i); + PGSR(gpio_to_bank(i)) |= GPIO_bit(i); else - PGSR(i) &= ~GPIO_bit(i); + PGSR(gpio_to_bank(i)) &= ~GPIO_bit(i); } } diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index d130f77b6d11..2f37d43f51b6 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -573,10 +573,10 @@ static struct pxafb_mode_info sharp_lq043t3dx02_mode = { .xres = 480, .yres = 272, .bpp = 16, - .hsync_len = 4, + .hsync_len = 41, .left_margin = 2, .right_margin = 1, - .vsync_len = 1, + .vsync_len = 10, .upper_margin = 3, .lower_margin = 1, .sync = 0, @@ -596,29 +596,31 @@ static void __init raumfeld_lcd_init(void) { int ret; - pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); - - /* Earlier devices had the backlight regulator controlled - * via PWM, later versions use another controller for that */ - if ((system_rev & 0xff) < 2) { - mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; - pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); - platform_device_register(&raumfeld_pwm_backlight_device); - } else - platform_device_register(&raumfeld_lt3593_device); - ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable"); if (ret < 0) pr_warning("Unable to request GPIO_TFT_VA_EN\n"); else gpio_direction_output(GPIO_TFT_VA_EN, 1); + msleep(100); + ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable"); if (ret < 0) pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n"); else gpio_direction_output(GPIO_DISPLAY_ENABLE, 1); + /* Hardware revision 2 has the backlight regulator controlled + * by an LT3593, earlier and later devices use PWM for that. */ + if ((system_rev & 0xff) == 2) { + platform_device_register(&raumfeld_lt3593_device); + } else { + mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; + pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); + platform_device_register(&raumfeld_pwm_backlight_device); + } + + pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); platform_device_register(&pxa3xx_device_gcu); } @@ -657,10 +659,10 @@ static struct lis3lv02d_platform_data lis3_pdata = { #define SPI_AK4104 \ { \ - .modalias = "ak4104", \ - .max_speed_hz = 10000, \ - .bus_num = 0, \ - .chip_select = 0, \ + .modalias = "ak4104-codec", \ + .max_speed_hz = 10000, \ + .bus_num = 0, \ + .chip_select = 0, \ .controller_data = (void *) GPIO_SPDIF_CS, \ } diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 7fe74067d85f..094279aefe9c 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/apm-emulation.h> diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 0d468e96e83e..81695353d8f4 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -10,7 +10,6 @@ obj-n := obj- := obj-$(CONFIG_CPU_S3C2410) += s3c2410.o -obj-$(CONFIG_CPU_S3C2410) += irq.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c deleted file mode 100644 index 2854129f8cc7..000000000000 --- a/arch/arm/mach-s3c2410/irq.c +++ /dev/null @@ -1,34 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/irq.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/syscore_ops.h> - -#include <plat/cpu.h> -#include <plat/pm.h> - -struct syscore_ops s3c24xx_irq_syscore_ops = { - .suspend = s3c24xx_irq_suspend, - .resume = s3c24xx_irq_resume, -}; diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index dd3120df09fe..fc2dc0b3d4fe 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -552,7 +552,7 @@ struct mini2440_features_t { struct platform_device *optional[8]; }; -static void mini2440_parse_features( +static void __init mini2440_parse_features( struct mini2440_features_t * features, const char * features_str ) { diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 82db072cb836..5e6b42089eb4 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -88,6 +88,7 @@ static struct s3c64xx_spi_info s3c64xx_spi0_pdata = { .cfg_gpio = s3c64xx_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, + .tx_st_done = 21, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -132,6 +133,7 @@ static struct s3c64xx_spi_info s3c64xx_spi1_pdata = { .cfg_gpio = s3c64xx_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, + .tx_st_done = 21, }; struct platform_device s3c64xx_device_spi1 = { diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index b197171e7d03..204bfafe4bfc 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -113,7 +113,7 @@ found: return chan; } -int s3c2410_dma_config(unsigned int channel, int xferunit) +int s3c2410_dma_config(enum dma_ch channel, int xferunit) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -297,7 +297,7 @@ static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan) return 0; } -int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) +int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -331,7 +331,7 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl); * */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -415,7 +415,7 @@ err_buff: EXPORT_SYMBOL(s3c2410_dma_enqueue); -int s3c2410_dma_devconfig(unsigned int channel, +int s3c2410_dma_devconfig(enum dma_ch channel, enum s3c2410_dmasrc source, unsigned long devaddr) { @@ -463,7 +463,7 @@ int s3c2410_dma_devconfig(unsigned int channel, EXPORT_SYMBOL(s3c2410_dma_devconfig); -int s3c2410_dma_getposition(unsigned int channel, +int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -487,7 +487,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition); * get control of an dma channel */ -int s3c2410_dma_request(unsigned int channel, +int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *client, void *dev) { @@ -533,7 +533,7 @@ EXPORT_SYMBOL(s3c2410_dma_request); * allowed to go through. */ -int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) +int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned long flags; diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c index e78ee18c76e3..ac825e826326 100644 --- a/arch/arm/mach-s5p64x0/dev-spi.c +++ b/arch/arm/mach-s5p64x0/dev-spi.c @@ -112,12 +112,14 @@ static struct s3c64xx_spi_info s5p6440_spi0_pdata = { .cfg_gpio = s5p6440_spi_cfg_gpio, .fifo_lvl_mask = 0x1ff, .rx_lvl_offset = 15, + .tx_st_done = 25, }; static struct s3c64xx_spi_info s5p6450_spi0_pdata = { .cfg_gpio = s5p6450_spi_cfg_gpio, .fifo_lvl_mask = 0x1ff, .rx_lvl_offset = 15, + .tx_st_done = 25, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -160,12 +162,14 @@ static struct s3c64xx_spi_info s5p6440_spi1_pdata = { .cfg_gpio = s5p6440_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 15, + .tx_st_done = 25, }; static struct s3c64xx_spi_info s5p6450_spi1_pdata = { .cfg_gpio = s5p6450_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 15, + .tx_st_done = 25, }; struct platform_device s5p64x0_device_spi1 = { diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c index 57b19794d9bb..e5d6c4dceb56 100644 --- a/arch/arm/mach-s5pc100/dev-spi.c +++ b/arch/arm/mach-s5pc100/dev-spi.c @@ -15,6 +15,7 @@ #include <mach/dma.h> #include <mach/map.h> #include <mach/spi-clocks.h> +#include <mach/irqs.h> #include <plat/s3c64xx-spi.h> #include <plat/gpio-cfg.h> @@ -90,6 +91,7 @@ static struct s3c64xx_spi_info s5pc100_spi0_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, .high_speed = 1, + .tx_st_done = 21, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -134,6 +136,7 @@ static struct s3c64xx_spi_info s5pc100_spi1_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, .high_speed = 1, + .tx_st_done = 21, }; struct platform_device s5pc100_device_spi1 = { @@ -176,6 +179,7 @@ static struct s3c64xx_spi_info s5pc100_spi2_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, .high_speed = 1, + .tx_st_done = 21, }; struct platform_device s5pc100_device_spi2 = { diff --git a/arch/arm/mach-s5pv210/cpufreq.c b/arch/arm/mach-s5pv210/cpufreq.c index 22046e2f53c2..153af8b359ec 100644 --- a/arch/arm/mach-s5pv210/cpufreq.c +++ b/arch/arm/mach-s5pv210/cpufreq.c @@ -101,12 +101,14 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq) unsigned long tmp, tmp1; void __iomem *reg = NULL; - if (ch == DMC0) + if (ch == DMC0) { reg = (S5P_VA_DMC0 + 0x30); - else if (ch == DMC1) + } else if (ch == DMC1) { reg = (S5P_VA_DMC1 + 0x30); - else + } else { printk(KERN_ERR "Cannot find DMC port\n"); + return; + } /* Find current DRAM frequency */ tmp = s5pv210_dram_conf[ch].freq; diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c index e3249a47e3b1..eaf9a7bff7a0 100644 --- a/arch/arm/mach-s5pv210/dev-spi.c +++ b/arch/arm/mach-s5pv210/dev-spi.c @@ -85,6 +85,7 @@ static struct s3c64xx_spi_info s5pv210_spi0_pdata = { .fifo_lvl_mask = 0x1ff, .rx_lvl_offset = 15, .high_speed = 1, + .tx_st_done = 25, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -129,6 +130,7 @@ static struct s3c64xx_spi_info s5pv210_spi1_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 15, .high_speed = 1, + .tx_st_done = 25, }; struct platform_device s5pv210_device_spi1 = { diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index c95258c274c1..ce5c2513c6ce 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -381,11 +381,9 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) gpio_set_value(GPIO_PORT114, state); } -static struct sh_mobile_sdhi_info sh_sdhi1_platdata = { - .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, - .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, +static struct sh_mobile_sdhi_info sh_sdhi1_info = { .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, - .tmio_caps = MMC_CAP_NONREMOVABLE, + .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .set_pwr = ag5evm_sdhi1_set_pwr, }; @@ -415,7 +413,7 @@ static struct platform_device sdhi1_device = { .name = "sh_mobile_sdhi", .id = 1, .dev = { - .platform_data = &sh_sdhi1_platdata, + .platform_data = &sh_sdhi1_info, }, .num_resources = ARRAY_SIZE(sdhi1_resources), .resource = sdhi1_resources, diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index f6b687f61c28..803bc6edfca4 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -913,7 +913,7 @@ static struct i2c_board_info imx074_info = { I2C_BOARD_INFO("imx074", 0x1a), }; -struct soc_camera_link imx074_link = { +static struct soc_camera_link imx074_link = { .bus_id = 0, .board_info = &imx074_info, .i2c_adapter_id = 0, diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 776f20560e72..3802f2afabef 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -126,7 +126,7 @@ * ------+--------------------+--------------------+------- * IRQ0 | ICR1A.IRQ0SA=0010 | SDHI2 card detect | Low * IRQ6 | ICR1A.IRQ6SA=0011 | Ether(LAN9220) | High - * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Tuch Panel | Low + * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Touch Panel | Low * IRQ8 | ICR2A.IRQ8SA=0010 | MMC/SD card detect | Low * IRQ9 | ICR2A.IRQ9SA=0010 | KEY(TCA6408) | Low * IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345) | High @@ -165,10 +165,10 @@ * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. * But don't select both drivers in same time. * These uses same IRQ number for request_irq(), and aren't supporting - * IRQF_SHARD / IORESOURCE_IRQ_SHAREABLE. + * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE. * * Actually these are old/new version of USB driver. - * This mean its register will be broken if it supports SHARD IRQ, + * This mean its register will be broken if it supports shared IRQ, */ /* @@ -562,7 +562,121 @@ out: clk_put(hdmi_ick); } -/* USB1 (Host) */ +/* USBHS0 is connected to CN22 which takes a USB Mini-B plug + * + * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug, + * but on this particular board IRQ7 is already used by + * the touch screen. This leaves us with software polling. + */ +#define USBHS0_POLL_INTERVAL (HZ * 5) + +struct usbhs_private { + unsigned int usbphyaddr; + unsigned int usbcrcaddr; + struct renesas_usbhs_platform_info info; + struct delayed_work work; + struct platform_device *pdev; +}; + +#define usbhs_get_priv(pdev) \ + container_of(renesas_usbhs_get_info(pdev), \ + struct usbhs_private, info) + +#define usbhs_is_connected(priv) \ + (!((1 << 7) & __raw_readw(priv->usbcrcaddr))) + +static int usbhs_get_vbus(struct platform_device *pdev) +{ + return usbhs_is_connected(usbhs_get_priv(pdev)); +} + +static void usbhs_phy_reset(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + /* init phy */ + __raw_writew(0x8a0a, priv->usbcrcaddr); +} + +static int usbhs0_get_id(struct platform_device *pdev) +{ + return USBHS_GADGET; +} + +static void usbhs0_work_function(struct work_struct *work) +{ + struct usbhs_private *priv = container_of(work, struct usbhs_private, + work.work); + + renesas_usbhs_call_notify_hotplug(priv->pdev); + schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL); +} + +static int usbhs0_hardware_init(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + priv->pdev = pdev; + INIT_DELAYED_WORK(&priv->work, usbhs0_work_function); + schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL); + return 0; +} + +static void usbhs0_hardware_exit(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + cancel_delayed_work_sync(&priv->work); +} + +static struct usbhs_private usbhs0_private = { + .usbcrcaddr = 0xe605810c, /* USBCR2 */ + .info = { + .platform_callback = { + .hardware_init = usbhs0_hardware_init, + .hardware_exit = usbhs0_hardware_exit, + .phy_reset = usbhs_phy_reset, + .get_id = usbhs0_get_id, + .get_vbus = usbhs_get_vbus, + }, + .driver_param = { + .buswait_bwait = 4, + }, + }, +}; + +static struct resource usbhs0_resources[] = { + [0] = { + .name = "USBHS0", + .start = 0xe6890000, + .end = 0xe68900e6 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x1ca0) /* USB0_USB0I0 */, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usbhs0_device = { + .name = "renesas_usbhs", + .id = 0, + .dev = { + .platform_data = &usbhs0_private.info, + }, + .num_resources = ARRAY_SIZE(usbhs0_resources), + .resource = usbhs0_resources, +}; + +/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug + * + * Use J30 to select between Host and Function. This setting + * can however not be detected by software. Hotplug of USBHS1 + * is provided via IRQ8. + */ +#define IRQ8 evt2irq(0x0300) + +/* USBHS1 USB Host support via r8a66597_hcd */ static void usb1_host_port_power(int port, int power) { if (!power) /* only power-on is supported for now */ @@ -579,9 +693,9 @@ static struct r8a66597_platdata usb1_host_data = { static struct resource usb1_host_resources[] = { [0] = { - .name = "USBHS", - .start = 0xE68B0000, - .end = 0xE68B00E6 - 1, + .name = "USBHS1", + .start = 0xe68b0000, + .end = 0xe68b00e6 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -602,37 +716,14 @@ static struct platform_device usb1_host_device = { .resource = usb1_host_resources, }; -/* USB1 (Function) */ +/* USBHS1 USB Function support via renesas_usbhs */ + #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) #define USB_PHY_OFF (1 << 0) #define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF) -struct usbhs_private { - unsigned int irq; - unsigned int usbphyaddr; - unsigned int usbcrcaddr; - struct renesas_usbhs_platform_info info; -}; - -#define usbhs_get_priv(pdev) \ - container_of(renesas_usbhs_get_info(pdev), \ - struct usbhs_private, info) - -#define usbhs_is_connected(priv) \ - (!((1 << 7) & __raw_readw(priv->usbcrcaddr))) - -static int usbhs1_get_id(struct platform_device *pdev) -{ - return USBHS_GADGET; -} - -static int usbhs1_get_vbus(struct platform_device *pdev) -{ - return usbhs_is_connected(usbhs_get_priv(pdev)); -} - static irqreturn_t usbhs1_interrupt(int irq, void *data) { struct platform_device *pdev = data; @@ -654,12 +745,10 @@ static int usbhs1_hardware_init(struct platform_device *pdev) struct usbhs_private *priv = usbhs_get_priv(pdev); int ret; - irq_set_irq_type(priv->irq, IRQ_TYPE_LEVEL_HIGH); - /* clear interrupt status */ __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); - ret = request_irq(priv->irq, usbhs1_interrupt, 0, + ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH, dev_name(&pdev->dev), pdev); if (ret) { dev_err(&pdev->dev, "request_irq err\n"); @@ -679,15 +768,12 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) /* clear interrupt status */ __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); - free_irq(priv->irq, pdev); + free_irq(IRQ8, pdev); } -static void usbhs1_phy_reset(struct platform_device *pdev) +static int usbhs1_get_id(struct platform_device *pdev) { - struct usbhs_private *priv = usbhs_get_priv(pdev); - - /* init phy */ - __raw_writew(0x8a0a, priv->usbcrcaddr); + return USBHS_GADGET; } static u32 usbhs1_pipe_cfg[] = { @@ -710,16 +796,15 @@ static u32 usbhs1_pipe_cfg[] = { }; static struct usbhs_private usbhs1_private = { - .irq = evt2irq(0x0300), /* IRQ8 */ - .usbphyaddr = 0xE60581E2, /* USBPHY1INTAP */ - .usbcrcaddr = 0xE6058130, /* USBCR4 */ + .usbphyaddr = 0xe60581e2, /* USBPHY1INTAP */ + .usbcrcaddr = 0xe6058130, /* USBCR4 */ .info = { .platform_callback = { .hardware_init = usbhs1_hardware_init, .hardware_exit = usbhs1_hardware_exit, - .phy_reset = usbhs1_phy_reset, .get_id = usbhs1_get_id, - .get_vbus = usbhs1_get_vbus, + .phy_reset = usbhs_phy_reset, + .get_vbus = usbhs_get_vbus, }, .driver_param = { .buswait_bwait = 4, @@ -731,9 +816,9 @@ static struct usbhs_private usbhs1_private = { static struct resource usbhs1_resources[] = { [0] = { - .name = "USBHS", - .start = 0xE68B0000, - .end = 0xE68B00E6 - 1, + .name = "USBHS1", + .start = 0xe68b0000, + .end = 0xe68b00e6 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -752,7 +837,6 @@ static struct platform_device usbhs1_device = { .resource = usbhs1_resources, }; - /* LED */ static struct gpio_led mackerel_leds[] = { { @@ -1205,6 +1289,7 @@ static struct platform_device *mackerel_devices[] __initdata = { &lcdc_device, &usb1_host_device, &usbhs1_device, + &usbhs0_device, &leds_device, &fsi_device, &fsi_ak4643_device, @@ -1301,6 +1386,7 @@ static void __init mackerel_map_io(void) #define GPIO_PORT9CR 0xE6051009 #define GPIO_PORT10CR 0xE605100A +#define GPIO_PORT167CR 0xE60520A7 #define GPIO_PORT168CR 0xE60520A8 #define SRCR4 0xe61580bc #define USCCR1 0xE6058144 @@ -1354,17 +1440,17 @@ static void __init mackerel_init(void) gpio_request(GPIO_PORT151, NULL); /* LCDDON */ gpio_direction_output(GPIO_PORT151, 1); - /* USB enable */ - gpio_request(GPIO_FN_VBUS0_1, NULL); - gpio_request(GPIO_FN_IDIN_1_18, NULL); - gpio_request(GPIO_FN_PWEN_1_115, NULL); - gpio_request(GPIO_FN_OVCN_1_114, NULL); - gpio_request(GPIO_FN_EXTLP_1, NULL); - gpio_request(GPIO_FN_OVCN2_1, NULL); - gpio_pull_down(GPIO_PORT168CR); - - /* setup USB phy */ - __raw_writew(0x8a0a, 0xE6058130); /* USBCR4 */ + /* USBHS0 */ + gpio_request(GPIO_FN_VBUS0_0, NULL); + gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */ + + /* USBHS1 */ + gpio_request(GPIO_FN_VBUS0_1, NULL); + gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ + gpio_request(GPIO_FN_IDIN_1_113, NULL); + + /* USB phy tweak to make the r8a66597_hcd host driver work */ + __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */ /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 5d0e1503ece6..a911a60e7719 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -250,6 +250,11 @@ static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id) return IRQ_HANDLED; } +static int sh73a0_set_wake(struct irq_data *data, unsigned int on) +{ + return 0; /* always allow wakeup */ +} + void __init sh73a0_init_irq(void) { void __iomem *gic_dist_base = __io(0xf0001000); @@ -257,6 +262,7 @@ void __init sh73a0_init_irq(void) void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); gic_init(0, 29, gic_dist_base, gic_cpu_base); + gic_arch_extn.irq_set_wake = sh73a0_set_wake; register_intc_controller(&intcs_desc); diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c index 2c10190dbb55..e546017f15de 100644 --- a/arch/arm/mach-shmobile/setup-sh7367.c +++ b/arch/arm/mach-shmobile/setup-sh7367.c @@ -38,7 +38,7 @@ static struct plat_sci_port scif0_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xc00), evt2irq(0xc00), evt2irq(0xc00), evt2irq(0xc00) }, }; @@ -57,7 +57,7 @@ static struct plat_sci_port scif1_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xc20), evt2irq(0xc20), evt2irq(0xc20), evt2irq(0xc20) }, }; @@ -76,7 +76,7 @@ static struct plat_sci_port scif2_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xc40), evt2irq(0xc40), evt2irq(0xc40), evt2irq(0xc40) }, }; @@ -95,7 +95,7 @@ static struct plat_sci_port scif3_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xc60), evt2irq(0xc60), evt2irq(0xc60), evt2irq(0xc60) }, }; @@ -114,7 +114,7 @@ static struct plat_sci_port scif4_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xd20), evt2irq(0xd20), evt2irq(0xd20), evt2irq(0xd20) }, }; @@ -133,7 +133,7 @@ static struct plat_sci_port scif5_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xd40), evt2irq(0xd40), evt2irq(0xd40), evt2irq(0xd40) }, }; @@ -152,7 +152,7 @@ static struct plat_sci_port scif6_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFB, .irqs = { evt2irq(0xd60), evt2irq(0xd60), evt2irq(0xd60), evt2irq(0xd60) }, }; diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index c84442cabe07..5ad8b2f94f8d 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -24,6 +24,8 @@ #include <mach/irqs.h> +#include "board-harmony.h" + #define PMC_CTRL 0x0 #define PMC_CTRL_INTR_LOW (1 << 17) @@ -98,7 +100,7 @@ static struct tps6586x_platform_data tps_platform = { .irq_base = TEGRA_NR_IRQS, .num_subdevs = ARRAY_SIZE(tps_devs), .subdevs = tps_devs, - .gpio_base = TEGRA_NR_GPIOS, + .gpio_base = HARMONY_GPIO_TPS6586X(0), }; static struct i2c_board_info __initdata harmony_regulators[] = { diff --git a/arch/arm/mach-tegra/board-harmony.h b/arch/arm/mach-tegra/board-harmony.h index 1e57b071f52d..d85142edaf6b 100644 --- a/arch/arm/mach-tegra/board-harmony.h +++ b/arch/arm/mach-tegra/board-harmony.h @@ -17,7 +17,8 @@ #ifndef _MACH_TEGRA_BOARD_HARMONY_H #define _MACH_TEGRA_BOARD_HARMONY_H -#define HARMONY_GPIO_WM8903(_x_) (TEGRA_NR_GPIOS + (_x_)) +#define HARMONY_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_)) +#define HARMONY_GPIO_WM8903(_x_) (HARMONY_GPIO_TPS6586X(4) + (_x_)) #define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5 #define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1 diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h index c34f3ea3017c..4f50ca8f901e 100644 --- a/arch/arm/mach-u300/clock.h +++ b/arch/arm/mach-u300/clock.h @@ -31,7 +31,7 @@ struct clk { bool reset; __u16 clk_val; __s8 usecount; - __u32 res_reg; + void __iomem * res_reg; __u16 res_mask; bool hw_ctrld; diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h index 8b85df4c8d8f..035fdc9dbdb0 100644 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -18,6 +18,12 @@ * the defines are used for setting up the I/O memory mapping. */ +#ifdef __ASSEMBLER__ +#define IOMEM(a) (a) +#else +#define IOMEM(a) (void __iomem *) a +#endif + /* NAND Flash CS0 */ #define U300_NAND_CS0_PHYS_BASE 0x80000000 @@ -48,13 +54,6 @@ #endif /* - * All the following peripherals are specified at their PHYSICAL address, - * so if you need to access them (in the kernel), you MUST use the macros - * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST() - * etc. - */ - -/* * AHB peripherals */ @@ -63,11 +62,11 @@ /* Vectored Interrupt Controller 0, servicing 32 interrupts */ #define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000) -#define U300_INTCON0_VBASE (U300_AHB_PER_VIRT_BASE+0x1000) +#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000) /* Vectored Interrupt Controller 1, servicing 32 interrupts */ #define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000) -#define U300_INTCON1_VBASE (U300_AHB_PER_VIRT_BASE+0x2000) +#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000) /* Memory Stick Pro (MSPRO) controller */ #define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000) @@ -115,7 +114,7 @@ /* SYSCON */ #define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000) -#define U300_SYSCON_VBASE (U300_SLOW_PER_VIRT_BASE+0x1000) +#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000) /* Watchdog */ #define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000) @@ -125,7 +124,7 @@ /* APP side special timer */ #define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000) -#define U300_TIMER_APP_VBASE (U300_SLOW_PER_VIRT_BASE+0x4000) +#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000) /* Keypad */ #define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000) @@ -181,5 +180,4 @@ * Virtual accessor macros for static devices */ - #endif diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index 891cf44591e0..18d7fa0603c2 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -411,8 +411,7 @@ static void __init u300_timer_init(void) /* Use general purpose timer 2 as clock source */ if (clocksource_mmio_init(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC, "GPT2", rate, 300, 32, clocksource_mmio_readl_up)) - printk(KERN_ERR "timer: failed to initialize clock " - "source %s\n", clocksource_u300_1mhz.name); + pr_err("timer: failed to initialize U300 clock source\n"); clockevents_calc_mult_shift(&clockevent_u300_1mhz, rate, APPTIMER_MIN_RANGE); diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index fd4cf1ca5efd..70cdbd60596a 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -110,10 +110,18 @@ static pin_cfg_t mop500_pins_common[] = { GPIO168_KP_O0, /* UART */ - GPIO0_U0_CTSn | PIN_INPUT_PULLUP, - GPIO1_U0_RTSn | PIN_OUTPUT_HIGH, - GPIO2_U0_RXD | PIN_INPUT_PULLUP, - GPIO3_U0_TXD | PIN_OUTPUT_HIGH, + /* uart-0 pins gpio configuration should be + * kept intact to prevent glitch in tx line + * when tty dev is opened. Later these pins + * are configured to uart mop500_pins_uart0 + * + * It will be replaced with uart configuration + * once the issue is solved. + */ + GPIO0_GPIO | PIN_INPUT_PULLUP, + GPIO1_GPIO | PIN_OUTPUT_HIGH, + GPIO2_GPIO | PIN_INPUT_PULLUP, + GPIO3_GPIO | PIN_OUTPUT_HIGH, GPIO29_U2_RXD | PIN_INPUT_PULLUP, GPIO30_U2_TXD | PIN_OUTPUT_HIGH, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index bb26f40493e6..2a08c07dec6d 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -27,18 +27,21 @@ #include <linux/leds-lp5521.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/delay.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <plat/i2c.h> #include <plat/ste_dma40.h> +#include <plat/pincfg.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> #include <mach/irqs.h> +#include "pins-db8500.h" #include "ste-dma40-db8500.h" #include "devices-db8500.h" #include "board-mop500.h" @@ -393,12 +396,63 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = { }; #endif + +static pin_cfg_t mop500_pins_uart0[] = { + GPIO0_U0_CTSn | PIN_INPUT_PULLUP, + GPIO1_U0_RTSn | PIN_OUTPUT_HIGH, + GPIO2_U0_RXD | PIN_INPUT_PULLUP, + GPIO3_U0_TXD | PIN_OUTPUT_HIGH, +}; + +#define PRCC_K_SOFTRST_SET 0x18 +#define PRCC_K_SOFTRST_CLEAR 0x1C +static void ux500_uart0_reset(void) +{ + void __iomem *prcc_rst_set, *prcc_rst_clr; + + prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + + PRCC_K_SOFTRST_SET); + prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + + PRCC_K_SOFTRST_CLEAR); + + /* Activate soft reset PRCC_K_SOFTRST_CLEAR */ + writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr); + udelay(1); + + /* Release soft reset PRCC_K_SOFTRST_SET */ + writel((readl(prcc_rst_set) | 0x1), prcc_rst_set); + udelay(1); +} + +static void ux500_uart0_init(void) +{ + int ret; + + ret = nmk_config_pins(mop500_pins_uart0, + ARRAY_SIZE(mop500_pins_uart0)); + if (ret < 0) + pr_err("pl011: uart pins_enable failed\n"); +} + +static void ux500_uart0_exit(void) +{ + int ret; + + ret = nmk_config_pins_sleep(mop500_pins_uart0, + ARRAY_SIZE(mop500_pins_uart0)); + if (ret < 0) + pr_err("pl011: uart pins_disable failed\n"); +} + static struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, .dma_tx_param = &uart0_dma_cfg_tx, #endif + .init = ux500_uart0_init, + .exit = ux500_uart0_exit, + .reset = ux500_uart0_reset, }; static struct amba_pl011_data uart1_plat = { diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index c3c417656bd9..4598b06c8c55 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -159,6 +159,9 @@ static void __init db8500_add_gpios(void) /* No custom data yet */ }; + if (cpu_is_u8500v2()) + pdata.supports_sleepmode = true; + dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base), IRQ_DB8500_GPIO0, &pdata); } diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 285edcd2da2a..9e6b93b1a043 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -46,12 +46,6 @@ static struct map_desc v2m_io_desc[] __initdata = { }, }; -static void __init v2m_init_early(void) -{ - ct_desc->init_early(); - versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); -} - static void __init v2m_timer_init(void) { u32 scctrl; @@ -365,6 +359,13 @@ static struct clk_lookup v2m_lookups[] = { }, }; +static void __init v2m_init_early(void) +{ + ct_desc->init_early(); + clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups)); + versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); +} + static void v2m_power_off(void) { if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0)) @@ -418,8 +419,6 @@ static void __init v2m_init(void) { int i; - clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups)); - platform_device_register(&v2m_pcie_i2c_device); platform_device_register(&v2m_ddc_i2c_device); platform_device_register(&v2m_flash_device); diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c index 245140c0df10..642de0408f25 100644 --- a/arch/arm/mach-vt8500/irq.c +++ b/arch/arm/mach-vt8500/irq.c @@ -39,9 +39,10 @@ static void __iomem *ic_regbase; static void __iomem *sic_regbase; -static void vt8500_irq_mask(unsigned int irq) +static void vt8500_irq_mask(struct irq_data *d) { void __iomem *base = ic_regbase; + unsigned irq = d->irq; u8 edge; if (irq >= 64) { @@ -64,9 +65,10 @@ static void vt8500_irq_mask(unsigned int irq) } } -static void vt8500_irq_unmask(unsigned int irq) +static void vt8500_irq_unmask(struct irq_data *d) { void __iomem *base = ic_regbase; + unsigned irq = d->irq; u8 dctr; if (irq >= 64) { @@ -78,10 +80,11 @@ static void vt8500_irq_unmask(unsigned int irq) writeb(dctr, base + VT8500_IC_DCTR + irq); } -static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type) +static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type) { void __iomem *base = ic_regbase; - unsigned int orig_irq = irq; + unsigned irq = d->irq; + unsigned orig_irq = irq; u8 dctr; if (irq >= 64) { @@ -114,11 +117,11 @@ static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type) } static struct irq_chip vt8500_irq_chip = { - .name = "vt8500", - .ack = vt8500_irq_mask, - .mask = vt8500_irq_mask, - .unmask = vt8500_irq_unmask, - .set_type = vt8500_irq_set_type, + .name = "vt8500", + .irq_ack = vt8500_irq_mask, + .irq_mask = vt8500_irq_mask, + .irq_unmask = vt8500_irq_unmask, + .irq_set_type = vt8500_irq_set_type, }; void __init vt8500_init_irq(void) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index ef59099a5463..44c086710d2b 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -120,17 +120,22 @@ static void l2x0_cache_sync(void) spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_flush_all(void) +static void __l2x0_flush_all(void) { - unsigned long flags; - - /* clean all ways */ - spin_lock_irqsave(&l2x0_lock, flags); debug_writel(0x03); writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY); cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask); cache_sync(); debug_writel(0x00); +} + +static void l2x0_flush_all(void) +{ + unsigned long flags; + + /* clean all ways */ + spin_lock_irqsave(&l2x0_lock, flags); + __l2x0_flush_all(); spin_unlock_irqrestore(&l2x0_lock, flags); } @@ -266,7 +271,9 @@ static void l2x0_disable(void) unsigned long flags; spin_lock_irqsave(&l2x0_lock, flags); - writel(0, l2x0_base + L2X0_CTRL); + __l2x0_flush_all(); + writel_relaxed(0, l2x0_base + L2X0_CTRL); + dsb(); spin_unlock_irqrestore(&l2x0_lock, flags); } diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 8bfae964b133..b0ee9ba3cfab 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -24,7 +24,9 @@ DEFINE_PER_CPU(struct mm_struct *, current_mm); /* * We fork()ed a process, and we need a new context for the child - * to run in. + * to run in. We reserve version 0 for initial tasks so we will + * always allocate an ASID. The ASID 0 is reserved for the TTBR + * register changing sequence. */ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) { @@ -34,11 +36,8 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) static void flush_context(void) { - u32 ttb; - /* Copy TTBR1 into TTBR0 */ - asm volatile("mrc p15, 0, %0, c2, c0, 1\n" - "mcr p15, 0, %0, c2, c0, 0" - : "=r" (ttb)); + /* set the reserved ASID before flushing the TLB */ + asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0)); isb(); local_flush_tlb_all(); if (icache_is_vivt_asid_tagged()) { @@ -94,7 +93,7 @@ static void reset_context(void *info) return; smp_rmb(); - asid = cpu_last_asid + cpu; + asid = cpu_last_asid + cpu + 1; flush_context(); set_mm_context(mm, asid); @@ -144,13 +143,13 @@ void __new_context(struct mm_struct *mm) * to start a new version and flush the TLB. */ if (unlikely((asid & ~ASID_MASK) == 0)) { - asid = cpu_last_asid + smp_processor_id(); + asid = cpu_last_asid + smp_processor_id() + 1; flush_context(); #ifdef CONFIG_SMP smp_wmb(); smp_call_function(reset_context, NULL, 1); #endif - cpu_last_asid += NR_CPUS - 1; + cpu_last_asid += NR_CPUS; } set_mm_context(mm, asid); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 2c2cce9cd8c8..c19571c40a21 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -331,6 +331,12 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) #endif #ifdef CONFIG_BLK_DEV_INITRD if (phys_initrd_size && + !memblock_is_region_memory(phys_initrd_start, phys_initrd_size)) { + pr_err("INITRD: 0x%08lx+0x%08lx is not a memory region - disabling initrd\n", + phys_initrd_start, phys_initrd_size); + phys_initrd_start = phys_initrd_size = 0; + } + if (phys_initrd_size && memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) { pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n", phys_initrd_start, phys_initrd_size); @@ -635,7 +641,8 @@ void __init mem_init(void) " modules : 0x%08lx - 0x%08lx (%4ld MB)\n" " .init : 0x%p" " - 0x%p" " (%4d kB)\n" " .text : 0x%p" " - 0x%p" " (%4d kB)\n" - " .data : 0x%p" " - 0x%p" " (%4d kB)\n", + " .data : 0x%p" " - 0x%p" " (%4d kB)\n" + " .bss : 0x%p" " - 0x%p" " (%4d kB)\n", MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) + (PAGE_SIZE)), @@ -657,7 +664,8 @@ void __init mem_init(void) MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_text, _etext), - MLK_ROUNDUP(_sdata, _edata)); + MLK_ROUNDUP(_sdata, _edata), + MLK_ROUNDUP(__bss_start, __bss_stop)); #undef MLK #undef MLM diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 9d9e736c2b4f..594d677b92c8 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -759,7 +759,7 @@ early_param("vmalloc", early_vmalloc); static phys_addr_t lowmem_limit __initdata = 0; -static void __init sanity_check_meminfo(void) +void __init sanity_check_meminfo(void) { int i, j, highmem = 0; @@ -1032,8 +1032,9 @@ void __init paging_init(struct machine_desc *mdesc) { void *zero_page; + memblock_set_current_limit(lowmem_limit); + build_mem_type_table(); - sanity_check_meminfo(); prepare_page_table(); map_lowmem(); devicemaps_init(mdesc); diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 687d02319a41..941a98c9e8aa 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -27,6 +27,10 @@ void __init arm_mm_memblock_reserve(void) memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE); } +void __init sanity_check_meminfo(void) +{ +} + /* * paging_init() sets up the page tables, initialises the zone memory * maps, and sets up the zero page, bad page and bad page tables. diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index e4c165ca6696..537ffcb0646d 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -146,7 +146,7 @@ __arm7tdmi_proc_info: .long 0 .long 0 .long v4_cache_fns - .size __arm7tdmi_proc_info, . - __arm7dmi_proc_info + .size __arm7tdmi_proc_info, . - __arm7tdmi_proc_info .type __triscenda7_proc_info, #object __triscenda7_proc_info: diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 7b7ebd4d096d..546b54da1005 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -116,7 +116,7 @@ __arm9tdmi_proc_info: .long 0 .long 0 .long v4_cache_fns - .size __arm9tdmi_proc_info, . - __arm9dmi_proc_info + .size __arm9tdmi_proc_info, . - __arm9tdmi_proc_info .type __p2001_proc_info, #object __p2001_proc_info: diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index b3b566ec83d3..089c0b5e454f 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -108,16 +108,18 @@ ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_ARM_ERRATA_430973 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB #endif - mrc p15, 0, r2, c2, c0, 1 @ load TTB 1 - mcr p15, 0, r2, c2, c0, 0 @ into TTB 0 +#ifdef CONFIG_ARM_ERRATA_754322 + dsb +#endif + mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID + isb +1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 isb #ifdef CONFIG_ARM_ERRATA_754322 dsb #endif mcr p15, 0, r1, c13, c0, 1 @ set context ID isb - mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 - isb #endif mov pc, lr ENDPROC(cpu_v7_switch_mm) @@ -208,19 +210,21 @@ cpu_v7_name: /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */ .globl cpu_v7_suspend_size -.equ cpu_v7_suspend_size, 4 * 8 +.equ cpu_v7_suspend_size, 4 * 9 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_v7_do_suspend) stmfd sp!, {r4 - r11, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID mrc p15, 0, r5, c13, c0, 1 @ Context ID + mrc p15, 0, r6, c13, c0, 3 @ User r/o thread ID + stmia r0!, {r4 - r6} mrc p15, 0, r6, c3, c0, 0 @ Domain ID mrc p15, 0, r7, c2, c0, 0 @ TTB 0 mrc p15, 0, r8, c2, c0, 1 @ TTB 1 mrc p15, 0, r9, c1, c0, 0 @ Control register mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control - stmia r0, {r4 - r11} + stmia r0, {r6 - r11} ldmfd sp!, {r4 - r11, pc} ENDPROC(cpu_v7_do_suspend) @@ -228,9 +232,11 @@ ENTRY(cpu_v7_do_resume) mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache - ldmia r0, {r4 - r11} + ldmia r0!, {r4 - r6} mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID mcr p15, 0, r5, c13, c0, 1 @ Context ID + mcr p15, 0, r6, c13, c0, 3 @ User r/o thread ID + ldmia r0, {r6 - r11} mcr p15, 0, r6, c3, c0, 0 @ Domain ID mcr p15, 0, r7, c2, c0, 0 @ TTB 0 mcr p15, 0, r8, c2, c0, 1 @ TTB 1 @@ -416,9 +422,9 @@ ENTRY(v7_processor_functions) .word cpu_v7_dcache_clean_area .word cpu_v7_switch_mm .word cpu_v7_set_pte_ext - .word 0 - .word 0 - .word 0 + .word cpu_v7_suspend_size + .word cpu_v7_do_suspend + .word cpu_v7_do_resume .size v7_processor_functions, . - v7_processor_functions .section ".rodata" diff --git a/arch/arm/plat-iop/cp6.c b/arch/arm/plat-iop/cp6.c index 9612a87e2a88..bab73e2c79db 100644 --- a/arch/arm/plat-iop/cp6.c +++ b/arch/arm/plat-iop/cp6.c @@ -18,6 +18,7 @@ */ #include <linux/init.h> #include <asm/traps.h> +#include <asm/ptrace.h> static int cp6_trap(struct pt_regs *regs, unsigned int instr) { diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c index 3538b85ede91..b130f60ca6b7 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-dma.c +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c @@ -139,7 +139,7 @@ static struct sdma_script_start_addrs addr_imx35_to2 = { #endif #ifdef CONFIG_SOC_IMX51 -static struct sdma_script_start_addrs addr_imx51_to1 = { +static struct sdma_script_start_addrs addr_imx51 = { .ap_2_ap_addr = 642, .uart_2_mcu_addr = 817, .mcu_2_app_addr = 747, @@ -196,7 +196,9 @@ static int __init imxXX_add_imx_dma(void) #if defined(CONFIG_SOC_IMX51) if (cpu_is_mx51()) { - imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1; + int to_version = mx51_revision() >> 4; + imx51_imx_sdma_data.pdata.to_version = to_version; + imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51; ret = imx_add_imx_sdma(&imx51_imx_sdma_data); } else #endif diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h index ea19a5b2f227..d5d7e651269c 100644 --- a/arch/arm/plat-nomadik/include/plat/gpio.h +++ b/arch/arm/plat-nomadik/include/plat/gpio.h @@ -90,6 +90,7 @@ struct nmk_gpio_platform_data { int num_gpio; u32 (*get_secondary_status)(unsigned int bank); void (*set_ioforce)(bool enable); + bool supports_sleepmode; }; #endif /* __ASM_PLAT_GPIO_H */ diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/plat-omap/include/plat/flash.h index 3083195123ea..0d88499b79e9 100644 --- a/arch/arm/plat-omap/include/plat/flash.h +++ b/arch/arm/plat-omap/include/plat/flash.h @@ -11,6 +11,7 @@ #include <linux/mtd/map.h> +struct platform_device; extern void omap1_set_vpp(struct platform_device *pdev, int enable); #endif diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h index 32a2f6c4d39e..e992b9655fbc 100644 --- a/arch/arm/plat-omap/include/plat/iovmm.h +++ b/arch/arm/plat-omap/include/plat/iovmm.h @@ -29,9 +29,6 @@ struct iovm_struct { * lower 16 bit is used for h/w and upper 16 bit is for s/w. */ #define IOVMF_SW_SHIFT 16 -#define IOVMF_HW_SIZE (1 << IOVMF_SW_SHIFT) -#define IOVMF_HW_MASK (IOVMF_HW_SIZE - 1) -#define IOVMF_SW_MASK (~IOVMF_HW_MASK)UL /* * iovma: h/w flags derived from cam and ram attribute diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index f38fef9f1310..c7b874186c27 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -101,6 +101,9 @@ struct omap_mmc_platform_data { /* If using power_saving and the MMC power is not to go off */ unsigned no_off:1; + /* eMMC does not handle power off when not in sleep state */ + unsigned no_regulator_off_init:1; + /* Regulator off remapped to sleep */ unsigned vcc_aux_disable_is_sleep:1; diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index 51ef43e8def6..83a37c54342f 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -648,7 +648,6 @@ u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt, return PTR_ERR(va); } - flags &= IOVMF_HW_MASK; flags |= IOVMF_DISCONT; flags |= IOVMF_MMIO; @@ -706,7 +705,6 @@ u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags) if (!va) return -ENOMEM; - flags &= IOVMF_HW_MASK; flags |= IOVMF_DISCONT; flags |= IOVMF_ALLOC; @@ -795,7 +793,6 @@ u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes, if (!va) return -ENOMEM; - flags &= IOVMF_HW_MASK; flags |= IOVMF_LINEAR; flags |= IOVMF_MMIO; @@ -853,7 +850,6 @@ u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags) return -ENOMEM; pa = virt_to_phys(va); - flags &= IOVMF_HW_MASK; flags |= IOVMF_LINEAR; flags |= IOVMF_ALLOC; diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index a37b8eb65b76..49fc0df0c21f 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -84,6 +84,7 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/pm_runtime.h> #include <plat/omap_device.h> #include <plat/omap_hwmod.h> @@ -539,20 +540,34 @@ int omap_early_device_register(struct omap_device *od) static int _od_runtime_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); + int ret; + + ret = pm_generic_runtime_suspend(dev); + + if (!ret) + omap_device_idle(pdev); + + return ret; +} - return omap_device_idle(pdev); +static int _od_runtime_idle(struct device *dev) +{ + return pm_generic_runtime_idle(dev); } static int _od_runtime_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); - return omap_device_enable(pdev); + omap_device_enable(pdev); + + return pm_generic_runtime_resume(dev); } static struct dev_power_domain omap_device_power_domain = { .ops = { .runtime_suspend = _od_runtime_suspend, + .runtime_idle = _od_runtime_idle, .runtime_resume = _od_runtime_resume, USE_PLATFORM_PM_SLEEP_OPS } diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index a3f50b34a90d..6af3d0b1f8d0 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -166,7 +166,7 @@ static void __init omap_detect_sram(void) else if (cpu_is_omap1611()) omap_sram_size = SZ_256K; else { - printk(KERN_ERR "Could not detect SRAM size\n"); + pr_err("Could not detect SRAM size\n"); omap_sram_size = 0x4000; } } @@ -221,10 +221,10 @@ static void __init omap_map_sram(void) omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE); iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc)); - printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n", - __pfn_to_phys(omap_sram_io_desc[0].pfn), - omap_sram_io_desc[0].virtual, - omap_sram_io_desc[0].length); + pr_info("SRAM: Mapped pa 0x%08llx to va 0x%08lx size: 0x%lx\n", + (long long) __pfn_to_phys(omap_sram_io_desc[0].pfn), + omap_sram_io_desc[0].virtual, + omap_sram_io_desc[0].length); /* * Normally devicemaps_init() would flush caches and tlb after @@ -252,7 +252,7 @@ static void __init omap_map_sram(void) void *omap_sram_push_address(unsigned long size) { if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) { - printk(KERN_ERR "Not enough space in SRAM\n"); + pr_err("Not enough space in SRAM\n"); return NULL; } diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 5b4fffab1eb4..41ab97ebe4cf 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -432,7 +432,7 @@ void __init orion_gpio_init(int gpio_base, int ngpio, ct->regs.mask = ochip->mask_offset + GPIO_EDGE_MASK_OFF; ct->regs.ack = GPIO_EDGE_CAUSE_OFF; ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_clr_bit; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_set_type = gpio_irq_set_type; diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c index 48ebb9479b61..a11dc3670505 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -50,7 +50,7 @@ static inline void __iomem *gpio_chip_base(struct gpio_chip *c) return container_of(c, struct pxa_gpio_chip, chip)->regbase; } -static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio) +static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio) { return &pxa_gpio_chips[gpio_to_bank(gpio)]; } @@ -161,7 +161,7 @@ static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type) int gpio = irq_to_gpio(d->irq); unsigned long gpdr, mask = GPIO_bit(gpio); - c = gpio_to_chip(gpio); + c = gpio_to_pxachip(gpio); if (type == IRQ_TYPE_PROBE) { /* Don't mess with enabled GPIOs using preconfigured edges or @@ -230,7 +230,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) static void pxa_ack_muxed_gpio(struct irq_data *d) { int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_chip(gpio); + struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); __raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET); } @@ -238,7 +238,7 @@ static void pxa_ack_muxed_gpio(struct irq_data *d) static void pxa_mask_muxed_gpio(struct irq_data *d) { int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_chip(gpio); + struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); uint32_t grer, gfer; c->irq_mask &= ~GPIO_bit(gpio); @@ -252,7 +252,7 @@ static void pxa_mask_muxed_gpio(struct irq_data *d) static void pxa_unmask_muxed_gpio(struct irq_data *d) { int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_chip(gpio); + struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); c->irq_mask |= GPIO_bit(gpio); update_edge_detect(c); diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index c10d10c56e2e..539bd0e3defd 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -712,7 +712,7 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel); * get control of an dma channel */ -int s3c2410_dma_request(unsigned int channel, +int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *client, void *dev) { @@ -783,7 +783,7 @@ EXPORT_SYMBOL(s3c2410_dma_request); * allowed to go through. */ -int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) +int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned long flags; @@ -974,7 +974,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan) } int -s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) +s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -1021,23 +1021,19 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl); * xfersize: size of unit in bytes (1,2,4) */ -int s3c2410_dma_config(unsigned int channel, +int s3c2410_dma_config(enum dma_ch channel, int xferunit) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned int dcon; - pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", - __func__, channel, xferunit, dcon); + pr_debug("%s: chan=%d, xfer_unit=%d\n", __func__, channel, xferunit); if (chan == NULL) return -EINVAL; - pr_debug("%s: Initial dcon is %08x\n", __func__, dcon); - dcon = chan->dcon & dma_sel.dcon_mask; - - pr_debug("%s: New dcon is %08x\n", __func__, dcon); + pr_debug("%s: dcon is %08x\n", __func__, dcon); switch (chan->req_ch) { case DMACH_I2S_IN: @@ -1104,7 +1100,7 @@ EXPORT_SYMBOL(s3c2410_dma_config); * devaddr: physical address of the source */ -int s3c2410_dma_devconfig(unsigned int channel, +int s3c2410_dma_devconfig(enum dma_ch channel, enum s3c2410_dmasrc source, unsigned long devaddr) { @@ -1177,7 +1173,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig); * returns the current transfer points for the dma source and destination */ -int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst) +int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -1199,7 +1195,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition); #ifdef CONFIG_PM -static void s3c2410_dma_suspend_chan(s3c2410_dma_chan *cp) +static void s3c2410_dma_suspend_chan(struct s3c2410_dma_chan *cp) { printk(KERN_DEBUG "suspending dma channel %d\n", cp->number); @@ -1235,7 +1231,7 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp) /* restore channel's hardware configuration */ if (!cp->in_use) - return 0; + return; printk(KERN_INFO "dma%d: restoring configuration\n", cp->number); @@ -1246,8 +1242,6 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp) if (cp->map != NULL) dma_sel.select(cp, cp->map); - - return 0; } static void s3c2410_dma_resume(void) diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index 9aee7e1668b1..fc8c5f89954d 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <asm/irq.h> #include <asm/mach/irq.h> @@ -668,3 +669,8 @@ void __init s3c24xx_init_irq(void) irqdbf("s3c2410: registered interrupt handlers\n"); } + +struct syscore_ops s3c24xx_irq_syscore_ops = { + .suspend = s3c24xx_irq_suspend, + .resume = s3c24xx_irq_resume, +}; diff --git a/arch/arm/plat-s5p/dev-onenand.c b/arch/arm/plat-s5p/dev-onenand.c index 6db926202caa..20336c8f2479 100644 --- a/arch/arm/plat-s5p/dev-onenand.c +++ b/arch/arm/plat-s5p/dev-onenand.c @@ -15,8 +15,6 @@ #include <linux/kernel.h> #include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/onenand.h> #include <mach/irqs.h> #include <mach/map.h> @@ -45,13 +43,3 @@ struct platform_device s5p_device_onenand = { .num_resources = ARRAY_SIZE(s5p_onenand_resources), .resource = s5p_onenand_resources, }; - -void s5p_onenand_set_platdata(struct onenand_platform_data *pdata) -{ - struct onenand_platform_data *pd; - - pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL); - if (!pd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - s5p_device_onenand.dev.platform_data = pd; -} diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h index a6c3d327ce72..d973d39666a3 100644 --- a/arch/arm/plat-s5p/include/plat/map-s5p.h +++ b/arch/arm/plat-s5p/include/plat/map-s5p.h @@ -39,7 +39,7 @@ #define S5P_VA_TWD S5P_VA_COREPERI(0x600) #define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000) -#define S5P_VA_USB_HSPHY S3C_ADDR(0x02900000) +#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000) #define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000)) #define VA_VIC0 VA_VIC(0) diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 135abda31c9a..327ab9f662e8 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -152,7 +152,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) if (!gc) return -ENOMEM; ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->chip.irq_set_type = s5p_gpioint_set_type, diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c index 899a8cc011ff..612934c48b0d 100644 --- a/arch/arm/plat-s5p/s5p-time.c +++ b/arch/arm/plat-s5p/s5p-time.c @@ -370,11 +370,11 @@ static void __init s5p_clocksource_init(void) clock_rate = clk_get_rate(tin_source); - init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate); - s5p_time_setup(timer_source.source_id, TCNT_MAX); s5p_time_start(timer_source.source_id, PERIODIC); + init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate); + if (clocksource_register_hz(&time_clocksource, clock_rate)) panic("%s: can't register clocksource\n", time_clocksource.name); } diff --git a/arch/arm/plat-samsung/dev-onenand.c b/arch/arm/plat-samsung/dev-onenand.c index 45ec73287d8c..f54ae71f0cd2 100644 --- a/arch/arm/plat-samsung/dev-onenand.c +++ b/arch/arm/plat-samsung/dev-onenand.c @@ -13,8 +13,6 @@ #include <linux/kernel.h> #include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/onenand.h> #include <mach/irqs.h> #include <mach/map.h> @@ -43,13 +41,3 @@ struct platform_device s3c_device_onenand = { .num_resources = ARRAY_SIZE(s3c_onenand_resources), .resource = s3c_onenand_resources, }; - -void s3c_onenand_set_platdata(struct onenand_platform_data *pdata) -{ - struct onenand_platform_data *pd; - - pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL); - if (!pd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - s3c_device_onenand.dev.platform_data = pd; -} diff --git a/arch/arm/plat-samsung/dma.c b/arch/arm/plat-samsung/dma.c index cb459dd95459..6143aa147688 100644 --- a/arch/arm/plat-samsung/dma.c +++ b/arch/arm/plat-samsung/dma.c @@ -41,7 +41,7 @@ struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel) * irq? */ -int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn) +int s3c2410_dma_set_opfn(enum dma_ch channel, s3c2410_dma_opfn_t rtn) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -56,7 +56,7 @@ int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn) } EXPORT_SYMBOL(s3c2410_dma_set_opfn); -int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn) +int s3c2410_dma_set_buffdone_fn(enum dma_ch channel, s3c2410_dma_cbfn_t rtn) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -71,7 +71,7 @@ int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn) } EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); -int s3c2410_dma_setflags(unsigned int channel, unsigned int flags) +int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index b61b8ee7cc52..e3b31c26ac3e 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -12,6 +12,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#ifndef __PLAT_DEVS_H +#define __PLAT_DEVS_H __FILE__ + #include <linux/platform_device.h> struct s3c24xx_uart_resources { @@ -75,10 +79,8 @@ extern struct platform_device s5pc100_device_spi1; extern struct platform_device s5pc100_device_spi2; extern struct platform_device s5pv210_device_spi0; extern struct platform_device s5pv210_device_spi1; -extern struct platform_device s5p6440_device_spi0; -extern struct platform_device s5p6440_device_spi1; -extern struct platform_device s5p6450_device_spi0; -extern struct platform_device s5p6450_device_spi1; +extern struct platform_device s5p64x0_device_spi0; +extern struct platform_device s5p64x0_device_spi1; extern struct platform_device s3c_device_hwmon; @@ -161,3 +163,5 @@ extern struct platform_device s3c_device_ac97; */ extern void *s3c_set_platdata(void *pd, size_t pdsize, struct platform_device *pdev); + +#endif /* __PLAT_DEVS_H */ diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h index 2e8f8c6560d7..8c273b7a6f56 100644 --- a/arch/arm/plat-samsung/include/plat/dma.h +++ b/arch/arm/plat-samsung/include/plat/dma.h @@ -42,6 +42,7 @@ struct s3c2410_dma_client { }; struct s3c2410_dma_chan; +enum dma_ch; /* s3c2410_dma_cbfn_t * @@ -62,7 +63,7 @@ typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *, * request a dma channel exclusivley */ -extern int s3c2410_dma_request(unsigned int channel, +extern int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *, void *dev); @@ -71,14 +72,14 @@ extern int s3c2410_dma_request(unsigned int channel, * change the state of the dma channel */ -extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op); +extern int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op); /* s3c2410_dma_setflags * * set the channel's flags to a given state */ -extern int s3c2410_dma_setflags(unsigned int channel, +extern int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags); /* s3c2410_dma_free @@ -86,7 +87,7 @@ extern int s3c2410_dma_setflags(unsigned int channel, * free the dma channel (will also abort any outstanding operations) */ -extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *); +extern int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *); /* s3c2410_dma_enqueue * @@ -95,7 +96,7 @@ extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *); * drained before the buffer is given to the DMA system. */ -extern int s3c2410_dma_enqueue(unsigned int channel, void *id, +extern int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size); /* s3c2410_dma_config @@ -103,14 +104,14 @@ extern int s3c2410_dma_enqueue(unsigned int channel, void *id, * configure the dma channel */ -extern int s3c2410_dma_config(unsigned int channel, int xferunit); +extern int s3c2410_dma_config(enum dma_ch channel, int xferunit); /* s3c2410_dma_devconfig * * configure the device we're talking to */ -extern int s3c2410_dma_devconfig(unsigned int channel, +extern int s3c2410_dma_devconfig(enum dma_ch channel, enum s3c2410_dmasrc source, unsigned long devaddr); /* s3c2410_dma_getposition @@ -118,10 +119,10 @@ extern int s3c2410_dma_devconfig(unsigned int channel, * get the position that the dma transfer is currently at */ -extern int s3c2410_dma_getposition(unsigned int channel, +extern int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dest); -extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn); -extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn); +extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn); +extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn); diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index c151c5f94a87..116edfe120b9 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -224,6 +224,8 @@ #define S5PV210_UFSTAT_RXMASK (255<<0) #define S5PV210_UFSTAT_RXSHIFT (0) +#define NO_NEED_CHECK_CLKSRC 1 + #ifndef __ASSEMBLY__ /* struct s3c24xx_uart_clksrc diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index 0ffe34a21554..4c16fa3621bb 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -39,6 +39,7 @@ struct s3c64xx_spi_csinfo { * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6 * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number * @high_speed: If the controller supports HIGH_SPEED_EN bit + * @tx_st_done: Depends on tx fifo_lvl field */ struct s3c64xx_spi_info { int src_clk_nr; @@ -53,6 +54,7 @@ struct s3c64xx_spi_info { int fifo_lvl_mask; int rx_lvl_offset; int high_speed; + int tx_st_done; }; /** diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c index 32582c0958e3..657405c481d0 100644 --- a/arch/arm/plat-samsung/irq-uart.c +++ b/arch/arm/plat-samsung/irq-uart.c @@ -54,8 +54,15 @@ static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base, handle_level_irq); + + if (!gc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n", + __func__, uirq->base_irq); + return; + } + ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->regs.ack = S3C64XX_UINTP; diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index a607546ddbd0..f714d060370d 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -54,6 +54,13 @@ void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq) s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq, S3C64XX_TINT_CSTAT, handle_level_irq); + + if (!s3c_tgc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %d failed\n", + __func__, timer_irq); + return; + } + ct = s3c_tgc->chip_types; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; |