diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/configs/imx23evk_defconfig | 173 | ||||
-rw-r--r-- | arch/arm/mach-mx23/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-mx23/usb_dr.c | 53 | ||||
-rw-r--r-- | arch/arm/mach-mx23/usb_h1.c | 81 | ||||
-rw-r--r-- | arch/arm/mach-mx28/usb_dr.c | 19 | ||||
-rw-r--r-- | arch/arm/plat-mxs/include/mach/fsl_usb.h | 8 | ||||
-rw-r--r-- | arch/arm/plat-mxs/regs-usbphy.h | 95 | ||||
-rw-r--r-- | arch/arm/plat-mxs/usb_common.c | 17 | ||||
-rw-r--r-- | arch/arm/plat-mxs/utmixc.c | 30 |
9 files changed, 281 insertions, 196 deletions
diff --git a/arch/arm/configs/imx23evk_defconfig b/arch/arm/configs/imx23evk_defconfig index 4511569943d3..fd0003083d4f 100644 --- a/arch/arm/configs/imx23evk_defconfig +++ b/arch/arm/configs/imx23evk_defconfig @@ -394,6 +394,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 @@ -495,10 +496,17 @@ CONFIG_TOUCHSCREEN_MXS=y # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set @@ -568,6 +576,7 @@ CONFIG_I2C_MXS_SELECT0=y # # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers @@ -632,6 +641,11 @@ CONFIG_WATCHDOG=y # # CONFIG_SOFT_WATCHDOG is not set CONFIG_MXS_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set CONFIG_SSB_POSSIBLE=y # @@ -765,8 +779,164 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=m +CONFIG_USB_EHCI_ARC=y +CONFIG_USB_EHCI_ARC_OTG=y +# CONFIG_USB_STATIC_IRAM is not set +# CONFIG_USB_EHCI_FSL_MC13783 is not set +# CONFIG_USB_EHCI_FSL_1301 is not set +# CONFIG_USB_EHCI_FSL_1504 is not set +CONFIG_USB_EHCI_FSL_UTMI=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +CONFIG_USB_GADGET_ARC=y +CONFIG_USB_ARC=m +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_GADGET_ARC_OTG=y +# CONFIG_USB_GADGET_FSL_MC13783 is not set +# CONFIG_USB_GADGET_FSL_1301 is not set +# CONFIG_USB_GADGET_FSL_1504 is not set +CONFIG_USB_GADGET_FSL_UTMI=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set CONFIG_MMC_UNSAFE_RESUME=y @@ -1068,6 +1238,7 @@ CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y diff --git a/arch/arm/mach-mx23/Makefile b/arch/arm/mach-mx23/Makefile index c97330788251..603d5581c6bf 100644 --- a/arch/arm/mach-mx23/Makefile +++ b/arch/arm/mach-mx23/Makefile @@ -11,4 +11,3 @@ obj-$(CONFIG_GENERIC_GPIO) += gpio.o ifneq ($(strip $(CONFIG_USB_GADGET_ARC) $(CONFIG_USB_EHCI_ARC_OTG)),) obj-y += usb_dr.o endif -obj-$(CONFIG_USB_EHCI_ARC_H1) += usb_h1.o diff --git a/arch/arm/mach-mx23/usb_dr.c b/arch/arm/mach-mx23/usb_dr.c index 69cb854366da..385c25aa2016 100644 --- a/arch/arm/mach-mx23/usb_dr.c +++ b/arch/arm/mach-mx23/usb_dr.c @@ -23,7 +23,11 @@ #include <linux/platform_device.h> #include <linux/fsl_devices.h> #include <mach/irqs.h> +#include <mach/mx23.h> #include "usb.h" +#include "mx23_pins.h" + +#define USB_POWER_ENABLE MXS_PIN_TO_GPIO(PINID_GMPI_CE2N) static void usb_host_phy_resume(struct fsl_usb2_platform_data *plat) { @@ -54,7 +58,7 @@ static struct fsl_usb2_platform_data __maybe_unused dr_utmi_config = { .power_budget = 500, /* 500 mA max power */ .platform_resume = usb_host_phy_resume, .transceiver = "utmi", - .phy_regs = USBPHY0_PHYS_ADDR, + .phy_regs = USBPHY_PHYS_ADDR, }; /* @@ -62,15 +66,20 @@ static struct fsl_usb2_platform_data __maybe_unused dr_utmi_config = { */ static struct resource otg_resources[] = { [0] = { - .start = (u32)USBCTRL0_PHYS_ADDR, - .end = (u32)(USBCTRL0_PHYS_ADDR + 0x1ff), + .start = (u32)USBCTRL_PHYS_ADDR, + .end = (u32)(USBCTRL_PHYS_ADDR + 0x1ff), .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_USB0, + .start = IRQ_USB_CTRL, .flags = IORESOURCE_IRQ, }, + + [2] = { + .start = IRQ_USB_WAKEUP, + .flags = IORESOURCE_IRQ, + } }; static u64 dr_udc_dmamask = ~(u32) 0; @@ -124,4 +133,40 @@ static int __init usb_dr_init(void) return 0; } +static unsigned int g_usb_power_enable_pin; +void fsl_phy_usb_utmi_init(struct fsl_xcvr_ops *this) +{ + int ret; + g_usb_power_enable_pin = 0; + ret = gpio_request(USB_POWER_ENABLE, "usb_power"); + if (ret) { + pr_err("request usb power enable fail\n"); + } else { + g_usb_power_enable_pin = USB_POWER_ENABLE; + gpio_direction_output(g_usb_power_enable_pin, 0); + } +} + +void fsl_phy_usb_utmi_uninit(struct fsl_xcvr_ops *this) +{ + if (g_usb_power_enable_pin) + gpio_free(g_usb_power_enable_pin); +} + +/*! + * set vbus power + * + * @param view viewport register + * @param on power on or off + */ +void fsl_phy_set_power(struct fsl_xcvr_ops *this, + struct fsl_usb2_platform_data *pdata, int on) +{ + if (g_usb_power_enable_pin) + gpio_set_value(g_usb_power_enable_pin, on); + else + pr_err("not usb power control pin set\n"); +} + module_init(usb_dr_init); + diff --git a/arch/arm/mach-mx23/usb_h1.c b/arch/arm/mach-mx23/usb_h1.c deleted file mode 100644 index 4ee6378c683f..000000000000 --- a/arch/arm/mach-mx23/usb_h1.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/fsl_devices.h> -#include <mach/arc_otg.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/irqs.h> -#include "usb.h" - -static void usb_host_phy_resume(struct fsl_usb2_platform_data *plat) -{ - fsl_platform_set_usb_phy_dis(plat, 0); -} - -static int fsl_usb_host_init_ext(struct platform_device *pdev) -{ - struct clk *usb_clk; - - usb_clk = clk_get(NULL, "usb_clk1"); - clk_enable(usb_clk); - clk_put(usb_clk); - - return fsl_usb_host_init(pdev); -} - -static struct fsl_usb2_platform_data usbh1_config = { - .name = "Host 1", - .platform_init = fsl_usb_host_init_ext, - .platform_uninit = fsl_usb_host_uninit, - .operating_mode = FSL_USB2_MPH_HOST, - .phy_mode = FSL_USB2_PHY_UTMI_WIDE, - .power_budget = 500, /* 500 mA max power */ - .platform_resume = usb_host_phy_resume, - .transceiver = "utmi", - .phy_regs = USBPHY1_PHYS_ADDR, -}; - -static struct resource usbh1_resources[] = { - [0] = { - .start = (u32) (USBCTRL1_PHYS_ADDR), - .end = (u32) (USBCTRL1_PHYS_ADDR + 0x1ff), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USB1, - .flags = IORESOURCE_IRQ, - }, -}; - -static int __init usbh1_init(void) -{ - pr_debug("%s: \n", __func__); - - host_pdev_register(usbh1_resources, - ARRAY_SIZE(usbh1_resources), &usbh1_config); - - return 0; -} - -module_init(usbh1_init); diff --git a/arch/arm/mach-mx28/usb_dr.c b/arch/arm/mach-mx28/usb_dr.c index 69cb854366da..c9dbe3dfcd5f 100644 --- a/arch/arm/mach-mx28/usb_dr.c +++ b/arch/arm/mach-mx28/usb_dr.c @@ -124,4 +124,23 @@ static int __init usb_dr_init(void) return 0; } +void fsl_phy_usb_utmi_init(struct fsl_xcvr_ops *this) +{ +} + +void fsl_phy_usb_utmi_uninit(struct fsl_xcvr_ops *this) +{ +} + +/*! + * set vbus power + * + * @param view viewport register + * @param on power on or off + */ +void fsl_phy_set_power(struct fsl_xcvr_ops *this, + struct fsl_usb2_platform_data *pdata, int on) +{ +} + module_init(usb_dr_init); diff --git a/arch/arm/plat-mxs/include/mach/fsl_usb.h b/arch/arm/plat-mxs/include/mach/fsl_usb.h index 50a9920c6b39..f88324856fc7 100644 --- a/arch/arm/plat-mxs/include/mach/fsl_usb.h +++ b/arch/arm/plat-mxs/include/mach/fsl_usb.h @@ -58,9 +58,17 @@ static inline void fsl_platform_set_host_mode(struct usb_hcd *hcd) static inline void fsl_platform_set_vbus_power(struct fsl_usb2_platform_data *pdata, int on) { + if (pdata->xcvr_ops && pdata->xcvr_ops->set_vbus_power) + pdata->xcvr_ops->set_vbus_power(pdata->xcvr_ops, pdata, on); } /* Set USB AHB burst length for host */ static inline void fsl_platform_set_ahb_burst(struct usb_hcd *hcd) { } + +void fsl_phy_usb_utmi_init(struct fsl_xcvr_ops *this); +void fsl_phy_usb_utmi_uninit(struct fsl_xcvr_ops *this); +void fsl_phy_set_power(struct fsl_xcvr_ops *this, + struct fsl_usb2_platform_data *pdata, int on); + diff --git a/arch/arm/plat-mxs/regs-usbphy.h b/arch/arm/plat-mxs/regs-usbphy.h index 5ab0152bc511..cf64bfdab0e6 100644 --- a/arch/arm/plat-mxs/regs-usbphy.h +++ b/arch/arm/plat-mxs/regs-usbphy.h @@ -1,5 +1,7 @@ /* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Freescale USBPHY Register Definitions + * + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -11,30 +13,24 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This file is created by xml file. Don't Edit it. + * + * Xml Revision: 1.52 + * Template revision: 26195 */ #ifndef __ARCH_ARM___USBPHY_H -#define __ARCH_ARM___USBPHY_H 1 +#define __ARCH_ARM___USBPHY_H -#define REGS_USBPHY_BASE (MX28_SOC_IO_VIRT_BASE + 0x7c000) -#define REGS_USBPHY_PHYS (0x8007C000) -#define REGS_USBPHY_SIZE 0x00002000 #define HW_USBPHY_PWD (0x00000000) #define HW_USBPHY_PWD_SET (0x00000004) #define HW_USBPHY_PWD_CLR (0x00000008) #define HW_USBPHY_PWD_TOG (0x0000000c) -#define HW_USBPHY_PWD_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_PWD) -#define HW_USBPHY_PWD_SET_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_PWD_SET) -#define HW_USBPHY_PWD_CLR_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_PWD_CLR) -#define HW_USBPHY_PWD_TOG_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_PWD_TOG) #define BP_USBPHY_PWD_RSVD2 21 #define BM_USBPHY_PWD_RSVD2 0xFFE00000 @@ -60,14 +56,6 @@ #define HW_USBPHY_TX_SET (0x00000014) #define HW_USBPHY_TX_CLR (0x00000018) #define HW_USBPHY_TX_TOG (0x0000001c) -#define HW_USBPHY_TX_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_TX) -#define HW_USBPHY_TX_SET_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_TX_SET) -#define HW_USBPHY_TX_CLR_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_TX_CLR) -#define HW_USBPHY_TX_TOG_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_TX_TOG) #define BP_USBPHY_TX_RSVD5 29 #define BM_USBPHY_TX_RSVD5 0xE0000000 @@ -112,14 +100,6 @@ #define HW_USBPHY_RX_SET (0x00000024) #define HW_USBPHY_RX_CLR (0x00000028) #define HW_USBPHY_RX_TOG (0x0000002c) -#define HW_USBPHY_RX_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_RX) -#define HW_USBPHY_RX_SET_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_RX_SET) -#define HW_USBPHY_RX_CLR_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_RX_CLR) -#define HW_USBPHY_RX_TOG_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_RX_TOG) #define BP_USBPHY_RX_RSVD2 23 #define BM_USBPHY_RX_RSVD2 0xFF800000 @@ -144,24 +124,17 @@ #define HW_USBPHY_CTRL_SET (0x00000034) #define HW_USBPHY_CTRL_CLR (0x00000038) #define HW_USBPHY_CTRL_TOG (0x0000003c) -#define HW_USBPHY_CTRL_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_CTRL) -#define HW_USBPHY_CTRL_SET_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_CTRL_SET) -#define HW_USBPHY_CTRL_CLR_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_CTRL_CLR) -#define HW_USBPHY_CTRL_TOG_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_CTRL_TOG) #define BM_USBPHY_CTRL_SFTRST 0x80000000 #define BM_USBPHY_CTRL_CLKGATE 0x40000000 #define BM_USBPHY_CTRL_UTMI_SUSPENDM 0x20000000 #define BM_USBPHY_CTRL_HOST_FORCE_LS_SE0 0x10000000 -#define BP_USBPHY_CTRL_RSVD3 14 -#define BM_USBPHY_CTRL_RSVD3 0x0FFFC000 -#define BF_USBPHY_CTRL_RSVD3(v) \ - (((v) << 14) & BM_USBPHY_CTRL_RSVD3) - +#define BM_USBPHY_CTRL_RSVD3 0x08000000 +#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS 0x04000000 +#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE 0x02000000 +#define BM_USBPHY_CTRL_FSDLL_RST_EN 0x01000000 +#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP 0x00800000 +#define BM_USBPHY_CTRL_ENIDCHG_WKUP 0x00400000 #define BM_USBPHY_CTRL_ENDPDMCHG_WKUP 0x00200000 #define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD 0x00100000 #define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE 0x00080000 @@ -175,7 +148,7 @@ #define BM_USBPHY_CTRL_ENIRQDEVPLUGIN 0x00000800 #define BM_USBPHY_CTRL_RESUME_IRQ 0x00000400 #define BM_USBPHY_CTRL_ENIRQRESUMEDETECT 0x00000200 -#define BM_USBPHY_CTRL_RSVD2 0x00000100 +#define BM_USBPHY_CTRL_RESUMEIRQSTICKY 0x00000100 #define BM_USBPHY_CTRL_ENOTGIDDETECT 0x00000080 #define BM_USBPHY_CTRL_RSVD1 0x00000040 #define BM_USBPHY_CTRL_DEVPLUGIN_POLARITY 0x00000020 @@ -186,8 +159,6 @@ #define BM_USBPHY_CTRL_RSVD0 0x00000001 #define HW_USBPHY_STATUS (0x00000040) -#define HW_USBPHY_STATUS_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_STATUS) #define BP_USBPHY_STATUS_RSVD4 11 #define BM_USBPHY_STATUS_RSVD4 0xFFFFF800 @@ -212,14 +183,6 @@ #define HW_USBPHY_DEBUG_SET (0x00000054) #define HW_USBPHY_DEBUG_CLR (0x00000058) #define HW_USBPHY_DEBUG_TOG (0x0000005c) -#define HW_USBPHY_DEBUG_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_DEBUG) -#define HW_USBPHY_DEBUG_SET_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_DEBUG_SET) -#define HW_USBPHY_DEBUG_CLR_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_DEBUG_CLR) -#define HW_USBPHY_DEBUG_TOG_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_DEBUG_TOG) #define BM_USBPHY_DEBUG_RSVD3 0x80000000 #define BM_USBPHY_DEBUG_CLKGATE 0x40000000 @@ -262,8 +225,6 @@ #define BM_USBPHY_DEBUG_OTGIDPIOLOCK 0x00000001 #define HW_USBPHY_DEBUG0_STATUS (0x00000060) -#define HW_USBPHY_DEBUG0_STATUS_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_DEBUG0_STATUS) #define BP_USBPHY_DEBUG0_STATUS_SQUELCH_COUNT 26 #define BM_USBPHY_DEBUG0_STATUS_SQUELCH_COUNT 0xFC000000 @@ -282,14 +243,6 @@ #define HW_USBPHY_DEBUG1_SET (0x00000074) #define HW_USBPHY_DEBUG1_CLR (0x00000078) #define HW_USBPHY_DEBUG1_TOG (0x0000007c) -#define HW_USBPHY_DEBUG1_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_DEBUG1) -#define HW_USBPHY_DEBUG1_SET_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_DEBUG1_SET) -#define HW_USBPHY_DEBUG1_CLR_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_DEBUG1_CLR) -#define HW_USBPHY_DEBUG1_TOG_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_DEBUG1_TOG) #define BP_USBPHY_DEBUG1_RSVD1 15 #define BM_USBPHY_DEBUG1_RSVD1 0xFFFF8000 @@ -310,8 +263,6 @@ (((v) << 0) & BM_USBPHY_DEBUG1_DBG_ADDRESS) #define HW_USBPHY_VERSION (0x00000080) -#define HW_USBPHY_VERSION_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_VERSION) #define BP_USBPHY_VERSION_MAJOR 24 #define BM_USBPHY_VERSION_MAJOR 0xFF000000 @@ -330,14 +281,6 @@ #define HW_USBPHY_IP_SET (0x00000094) #define HW_USBPHY_IP_CLR (0x00000098) #define HW_USBPHY_IP_TOG (0x0000009c) -#define HW_USBPHY_IP_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_IP) -#define HW_USBPHY_IP_SET_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_IP_SET) -#define HW_USBPHY_IP_CLR_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_IP_CLR) -#define HW_USBPHY_IP_TOG_ADDR \ - (REGS_USBPHY_BASE + HW_USBPHY_IP_TOG) #define BP_USBPHY_IP_RSVD1 25 #define BM_USBPHY_IP_RSVD1 0xFE000000 diff --git a/arch/arm/plat-mxs/usb_common.c b/arch/arm/plat-mxs/usb_common.c index b6f556866a52..c9a65a0accb2 100644 --- a/arch/arm/plat-mxs/usb_common.c +++ b/arch/arm/plat-mxs/usb_common.c @@ -48,7 +48,6 @@ #include <linux/io.h> #include "regs-usbphy.h" -#ifdef CONFIG_ARCH_MX28 #define MXC_NUMBER_USB_TRANSCEIVER 6 struct fsl_xcvr_ops *g_xc_ops[MXC_NUMBER_USB_TRANSCEIVER] = { NULL }; @@ -95,14 +94,12 @@ EXPORT_SYMBOL(fsl_platform_set_test_mode); void fsl_platform_set_usb_phy_dis(struct fsl_usb2_platform_data *pdata, bool enable) { - void __iomem *ctrl_reg = IO_ADDRESS(pdata->phy_regs + HW_USBPHY_CTRL); - u32 tmp = __raw_readl(ctrl_reg); - if (enable) - tmp |= BM_USBPHY_CTRL_ENHOSTDISCONDETECT; + __raw_writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, + IO_ADDRESS(pdata->phy_regs) + HW_USBPHY_CTRL_SET); else - tmp &= ~BM_USBPHY_CTRL_ENHOSTDISCONDETECT; - __raw_writel(tmp, ctrl_reg); + __raw_writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, + IO_ADDRESS(pdata->phy_regs) + HW_USBPHY_CTRL_CLR); } EXPORT_SYMBOL(fsl_platform_set_usb_phy_dis); @@ -307,10 +304,10 @@ int usbotg_init(struct platform_device *pdev) if (pdata->operating_mode == FSL_USB2_DR_HOST) { /* enable FS/LS device */ - tmp = __raw_readl(HW_USBPHY_CTRL_ADDR); + tmp = __raw_readl(IO_ADDRESS(pdata->phy_regs) + HW_USBPHY_CTRL); tmp |= (BM_USBPHY_CTRL_ENUTMILEVEL2 | BM_USBPHY_CTRL_ENUTMILEVEL3); - __raw_writel(tmp, HW_USBPHY_CTRL_ADDR); + __raw_writel(tmp, IO_ADDRESS(pdata->phy_regs) + HW_USBPHY_CTRL); } otg_used++; @@ -378,7 +375,7 @@ int usb_host_wakeup_irq(struct device *wkup_dev) return 0; } EXPORT_SYMBOL(usb_host_wakeup_irq); -#endif + void usb_host_set_wakeup(struct device *wkup_dev, bool para) { } diff --git a/arch/arm/plat-mxs/utmixc.c b/arch/arm/plat-mxs/utmixc.c index 427526c81813..a3b0175a138b 100644 --- a/arch/arm/plat-mxs/utmixc.c +++ b/arch/arm/plat-mxs/utmixc.c @@ -32,33 +32,17 @@ #include <mach/arc_otg.h> #include <asm/mach-types.h> - -static void usb_utmi_init(struct fsl_xcvr_ops *this) -{ -} - -static void usb_utmi_uninit(struct fsl_xcvr_ops *this) -{ -} - -/*! - * set vbus power - * - * @param view viewport register - * @param on power on or off - */ -static void set_power(struct fsl_xcvr_ops *this, - struct fsl_usb2_platform_data *pdata, int on) -{ - -} +extern void fsl_phy_usb_utmi_init(struct fsl_xcvr_ops *this); +extern void fsl_phy_usb_utmi_uninit(struct fsl_xcvr_ops *this); +extern void fsl_phy_set_power(struct fsl_xcvr_ops *this, + struct fsl_usb2_platform_data *pdata, int on); static struct fsl_xcvr_ops utmi_ops = { .name = "utmi", .xcvr_type = PORTSC_PTS_UTMI, - .init = usb_utmi_init, - .uninit = usb_utmi_uninit, - .set_vbus_power = set_power, + .init = fsl_phy_usb_utmi_init, + .uninit = fsl_phy_usb_utmi_uninit, + .set_vbus_power = fsl_phy_set_power, }; extern void fsl_usb_xcvr_register(struct fsl_xcvr_ops *xcvr_ops); |