diff options
Diffstat (limited to 'arch/arm')
30 files changed, 20079 insertions, 0 deletions
diff --git a/arch/arm/configs/imx23evk_updater_defconfig b/arch/arm/configs/imx23evk_updater_defconfig new file mode 100644 index 000000000000..f6a430b5bf5f --- /dev/null +++ b/arch/arm/configs/imx23evk_updater_defconfig @@ -0,0 +1,1177 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.31 +# Thu May 6 16:41:59 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_FIQ=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-updater" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +CONFIG_ARCH_MXS=y +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +CONFIG_IRAM_ALLOC=y +CONFIG_DMA_ZONE_SIZE=12 +CONFIG_VECTORS_PHY_ADDR=0 + +# +# Freescale i.MXS implementations +# +# CONFIG_ARCH_MX28 is not set +CONFIG_ARCH_MX23=y +CONFIG_MACH_MX23EVK=y +CONFIG_MXS_ICOLL=y +CONFIG_MXS_EARLY_CONSOLE=y +CONFIG_MXS_DMA_ENGINE=y +CONFIG_MXS_LRADC=y +CONFIG_MXS_PWM_CHANNELS=8 + +# +# Freescale Application UART: +# +CONFIG_MXS_AUART_DMA_SUPPORT=y +CONFIG_MXS_AUART_PORTS=5 +# CONFIG_MXS_AUART0_DEVICE_ENABLE is not set +# CONFIG_MXS_AUART0_DMA_ENABLE is not set +CONFIG_MXS_AUART1_DEVICE_ENABLE=y +# CONFIG_MXS_AUART1_DMA_ENABLE is not set +# CONFIG_MXS_AUART2_DEVICE_ENABLE is not set +# CONFIG_MXS_AUART2_DMA_ENABLE is not set +# CONFIG_MXS_AUART3_DEVICE_ENABLE is not set +# CONFIG_MXS_AUART3_DMA_ENABLE is not set +# CONFIG_MXS_AUART4_DEVICE_ENABLE is not set +# CONFIG_MXS_AUART4_DMA_ENABLE is not set +CONFIG_MXS_RAM_FREQ_SCALING=y +# CONFIG_MXS_RAM_MDDR is not set +CONFIG_MXS_RAM_DDR=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyAM0,115200 rdinit=/linuxrc" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_GPMI_NFC=y +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=128 +CONFIG_MTD_UBI_BEB_RESERVE=2 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_MTD_UBI_BLOCK is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_MXS_PERSISTENT=y +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_MXS_VIIM is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_MXS_DUART=y +CONFIG_SERIAL_MXS_AUART=y +CONFIG_SERIAL_MXS_DUART_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_I2C_SLAVE is not set +# CONFIG_SPI is not set +CONFIG_FSL_OTP=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_MXS=y +# CONFIG_FB_MXS_LCD_43WVF1G is not set +CONFIG_FB_MXS_LCD_LMS430=y +# CONFIG_FB_MXS_TVENC is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_MXS=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +CONFIG_USB_GADGET_ARC=y +CONFIG_USB_ARC=y +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=y +CONFIG_FSL_UTP=y +# CONFIG_USB_FILE_STORAGE_TEST is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_IMX_ESDHCI_PIO_MODE is not set +CONFIG_MMC_MXS=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_MXS=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_MXS=y +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +# CONFIG_UBIFS_FS_ZLIB is not set +# CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_CRYPTODEV is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_DCP is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/imx5_android_ccwmx51js_defconfig b/arch/arm/configs/imx5_android_ccwmx51js_defconfig new file mode 100644 index 000000000000..7159eb55c4d4 --- /dev/null +++ b/arch/arm/configs/imx5_android_ccwmx51js_defconfig @@ -0,0 +1,2099 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.31 +# Wed Jan 26 17:12:17 2011 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# +CONFIG_ASHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_MXS is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +CONFIG_IRAM_ALLOC=y +CONFIG_DMA_ZONE_SIZE=96 +CONFIG_UTMI_MXC=y + +# +# Freescale MXC Implementations +# +# CONFIG_ARCH_MX1 is not set +# CONFIG_ARCH_MX2 is not set +# CONFIG_ARCH_MX3 is not set +# CONFIG_ARCH_MX25 is not set +# CONFIG_ARCH_MX35 is not set +# CONFIG_ARCH_MX37 is not set +CONFIG_ARCH_MX5=y +CONFIG_MXC_SDMA_API=y +CONFIG_SDMA_IRAM=y +CONFIG_I2C_MXC_SELECT2=y +# CONFIG_I2C_MXC_SELECT3 is not set +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_ARCH_MXC_HAS_NFC_V3=y +CONFIG_ARCH_MX51=y +# CONFIG_ARCH_MX53 is not set +CONFIG_MX5_OPTIONS=y +# CONFIG_MACH_MX51_3DS is not set +# CONFIG_MACH_MX51_BABBAGE is not set +# CONFIG_MACH_MX53_EVK is not set +# CONFIG_MACH_MX50_ARM2 is not set +CONFIG_MODULE_CCXMX51=y +CONFIG_LATE_CPU_CLK_ENABLE=y +# CONFIG_MACH_MX50_RDP is not set +CONFIG_MACH_CCWMX51JS=y +# CONFIG_MACH_CCWMX51 is not set +# CONFIG_MACH_CCMX51JS is not set +# CONFIG_MACH_CCMX51 is not set +# CONFIG_JSCCWMX51_V1 is not set +CONFIG_JSCCWMX51_V2=y +# CONFIG_JSCCWMX51_CUSTOM is not set + +# +# MX5x Options: +# +CONFIG_MXC_NAND_SWAP_BI=y +CONFIG_ARCH_MXC_HAS_NFC_V3_2=y + +# +# Serial Port Options +# +CONFIG_UART1_ENABLED=y +CONFIG_UART1_2WIRE_ENABLED=y +# CONFIG_UART1_CTS_RTS_ENABLED is not set +# CONFIG_UART1_FULL_UART_ENABLED is not set +# CONFIG_UART1_IRDA_ENABLED is not set +CONFIG_UART2_ENABLED=y + +# +# UART2 CTS/RTS is not available on the ConnectCore Wi-i.MX51 JumpStart board if +# + +# +# the support for Host1 of the Freescale USB controller is enabled. +# +# CONFIG_UART2_IRDA_ENABLED is not set +CONFIG_UART3_ENABLED=y +# CONFIG_UART3_CTS_RTS_ENABLED is not set +# CONFIG_UART3_IRDA_ENABLED is not set + +# +# SPI Interface Options +# +CONFIG_SPI_MXC_SELECT1=y +CONFIG_SPI_MXC_SELECT1_SS1=y +# CONFIG_SPI_MXC_SELECT2 is not set +# CONFIG_SPI_MXC_SELECT3 is not set + +# +# I2C Interface options +# + +# +# SD/MMC Interface options +# +CONFIG_ESDHCI_MXC_SELECT1=y +CONFIG_ESDHCI_MXC_SELECT3=y + +# +# Video Interface(s) +# +# CONFIG_CCWMX51_DEFAULT_VIDEO_32BPP is not set +CONFIG_CCWMX51_DEFAULT_VIDEO_16BPP=y +CONFIG_CCWMX51_DEFAULT_VIDEO_BPP=16 +CONFIG_CCWMX51_DISP0=y +# CONFIG_CCWMX51_DISP0_RGB888 is not set +CONFIG_CCWMX51_DISP0_RGB666=y + +# +# To enable the Display 2 Video interface, disable the FEC (under network drivers) +# + +# +# and set 18bit color mode for the Display 1 +# +# CONFIG_CCWMX51_SECOND_TOUCH is not set +CONFIG_MXC_TZIC=y +CONFIG_ISP1504_MXC=y +# CONFIG_MXC_IRQ_PRIOR is not set +# CONFIG_MXC_PWM is not set +CONFIG_ARCH_MXC_IOMUX_V3=y +# CONFIG_MXC_DVFS_PER is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_ERRATA_430973=y +CONFIG_ARM_ERRATA_458693=y +CONFIG_ARM_ERRATA_460075=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_IMX=y +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HAS_WAKELOCK=y +CONFIG_HAS_EARLYSUSPEND=y +CONFIG_WAKELOCK=y +CONFIG_WAKELOCK_STAT=y +CONFIG_USER_WAKELOCK=y +CONFIG_EARLYSUSPEND=y +# CONFIG_NO_USER_SPACE_SCREEN_ACCESS_CONTROL is not set +# CONFIG_CONSOLE_EARLYSUSPEND is not set +CONFIG_FB_EARLYSUSPEND=y +CONFIG_APM_EMULATION=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=y +# CONFIG_BT_HCIBTSDIO is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +CONFIG_BT_HCIVHCI=y +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=y +# CONFIG_MAC80211_DEFAULT_PS is not set +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 + +# +# Rate control algorithm selection +# +# CONFIG_MAC80211_RC_PID is not set +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +CONFIG_RFKILL=y +CONFIG_RFKILL_INPUT=y +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_MXC is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_MXC_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_IMX_NFC is not set +CONFIG_MTD_NAND_MXC_V3=y +# CONFIG_MTD_NAND_MXC_SWECC is not set +# CONFIG_MTD_NAND_MXC_FORCE_CE is not set +# CONFIG_MXC_NAND_LOW_LEVEL_ERASE is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_MTD_UBI_BLOCK is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +CONFIG_ANDROID_PMEM=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +CONFIG_UID_STAT=y +CONFIG_FSL_CACHE=y +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +# CONFIG_SCSI_WAIT_SCAN is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_CS89x0 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +CONFIG_FEC=y +# CONFIG_FEC_1588 is not set +# CONFIG_FEC2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_HSO is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_APMPOWER is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_MXC is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +CONFIG_TOUCHSCREEN_MXC=y +CONFIG_TOUCH_MXC_DELTA_X=10 +CONFIG_TOUCH_MXC_DELTA_Y=10 +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_MXC_IIM is not set +# CONFIG_MXS_VIIM is not set +# CONFIG_IMX_SIM is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_MXC=y +CONFIG_SERIAL_MXC_CONSOLE=y +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_IMX is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_IMX is not set +CONFIG_I2C_MXC=y +# CONFIG_I2C_MXC_HS is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_I2C_SLAVE is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_MXC=y +# CONFIG_SPI_MXC_TEST_LOOPBACK is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_APM_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_MXC_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TDA9875 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set + +# +# RDS decoders +# +# CONFIG_VIDEO_SAA6588 is not set + +# +# Video decoders +# +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_MT9V011 is not set +# CONFIG_VIDEO_TCM825X is not set +# CONFIG_VIDEO_SAA7110 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_SAA7191 is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_VPX3220 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_CX25840 is not set + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_THS7303 is not set +# CONFIG_VIDEO_ADV7343 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_MXC_CAMERA is not set +CONFIG_VIDEO_MXC_OUTPUT=y +CONFIG_VIDEO_MXC_IPU_OUTPUT=y +# CONFIG_VIDEO_MXC_IPUV1_WVGA_OUTPUT is not set +# CONFIG_VIDEO_MXC_PXP_V4L2 is not set +# CONFIG_VIDEO_MXC_OPL is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_MXC=y +CONFIG_FB_MXC_SYNC_PANEL=y +# CONFIG_FB_MXC_EPSON_VGA_SYNC_PANEL is not set +# CONFIG_FB_MXC_TVOUT_TVE is not set +# CONFIG_FB_MXC_LDB is not set +# CONFIG_FB_MXC_CLAA_WVGA_SYNC_PANEL is not set +# CONFIG_FB_MXC_SII9022 is not set +# CONFIG_FB_MXC_CH7026 is not set +# CONFIG_FB_MXC_TVOUT_CH7024 is not set +CONFIG_VIDEO_AD9389=y +# CONFIG_FB_MXC_ASYNC_PANEL is not set +# CONFIG_FB_MXC_ELCDIF_FB is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_HRTIMER is not set +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_SND_MXC_SOC=y +CONFIG_SND_MXC_SOC_SSI=y +# CONFIG_SND_MXC_SOC_IRAM is not set +# CONFIG_SND_SOC_IMX_3STACK_SGTL5000 is not set +# CONFIG_SND_SOC_IMX_3STACK_AK4647 is not set +# CONFIG_SND_SOC_IMX_3STACK_WM8580 is not set +CONFIG_SND_SOC_IMX_CCWMX51_WM8753=y +# CONFIG_SND_SOC_IMX_3STACK_AK5702 is not set +# CONFIG_SND_SOC_IMX_3STACK_BLUETOOTH is not set +# CONFIG_SND_SOC_IMX_3STACK_CS42888 is not set +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_WM8753=y +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ARC=y +CONFIG_USB_EHCI_ARC_H1=y +CONFIG_USB_EHCI_ARC_OTG=y +# CONFIG_USB_STATIC_IRAM is not set +# CONFIG_USB_EHCI_FSL_MC13783 is not set +# CONFIG_USB_EHCI_FSL_1301 is not set +# CONFIG_USB_EHCI_FSL_1504 is not set +CONFIG_USB_EHCI_FSL_UTMI=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +CONFIG_USB_STORAGE_USBAT=y +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=y +# CONFIG_USB_SERIAL_CONSOLE is not set +# CONFIG_USB_EZUSB is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +CONFIG_USB_SERIAL_OPTION=y +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +CONFIG_USB_GADGET_ARC=y +# CONFIG_USB_STATIC_IRAM_PPH is not set +CONFIG_USB_ARC=y +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_USB_ANDROID=y +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MXC_OTG=y +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_MXC is not set +# CONFIG_MMC_SPI is not set +CONFIG_MMC_IMX_ESDHCI=y +# CONFIG_MMC_IMX_ESDHCI_PIO_MODE is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_SWITCH=y +# CONFIG_SWITCH_GPIO is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_INTF_ALARM=y +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_MXC is not set +# CONFIG_RTC_DRV_MXC_V2 is not set +# CONFIG_RTC_DRV_IMXDI is not set +CONFIG_RTC_MC13892=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_LP3971 is not set +CONFIG_REGULATOR_MC13892=y +# CONFIG_REGULATOR_MAX17135 is not set +# CONFIG_UIO is not set +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_MEILHAUS is not set +# CONFIG_USB_IP_COMMON is not set +# CONFIG_ECHO is not set +# CONFIG_COMEDI is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_INPUT_MIMIO is not set +# CONFIG_TRANZPORT is not set + +# +# Android +# +CONFIG_ANDROID=y +CONFIG_ANDROID_BINDER_IPC=y +CONFIG_ANDROID_LOGGER=y +CONFIG_ANDROID_RAM_CONSOLE=y +CONFIG_ANDROID_RAM_CONSOLE_ENABLE_VERBOSE=y +CONFIG_ANDROID_RAM_CONSOLE_EARLY_INIT=y +CONFIG_ANDROID_RAM_CONSOLE_EARLY_ADDR=0 +CONFIG_ANDROID_RAM_CONSOLE_EARLY_SIZE=0 +CONFIG_ANDROID_TIMED_OUTPUT=y +CONFIG_ANDROID_TIMED_GPIO=y +CONFIG_ANDROID_LOW_MEMORY_KILLER=y +# CONFIG_DST is not set +# CONFIG_POHMELFS is not set +# CONFIG_PLAN9AUTH is not set +# CONFIG_LINE6_USB is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_USB_CPC is not set +# CONFIG_FB_UDL is not set + +# +# MXC support drivers +# +CONFIG_MXC_IPU=y +CONFIG_MXC_IPU_V3=y + +# +# MXC SSI support +# +# CONFIG_MXC_SSI is not set + +# +# MXC Digital Audio Multiplexer support +# +# CONFIG_MXC_DAM is not set + +# +# MXC PMIC support +# +CONFIG_MXC_PMIC=y +# CONFIG_MXC_PMIC_MC13783 is not set +CONFIG_MXC_PMIC_MC13892=y +# CONFIG_MXC_PMIC_I2C is not set +CONFIG_MXC_PMIC_SPI=y +# CONFIG_MXC_PMIC_MC34704 is not set +# CONFIG_MXC_PMIC_MC9SDZ60 is not set +# CONFIG_MXC_PMIC_CHARDEV is not set + +# +# MXC PMIC Client Drivers +# +CONFIG_MXC_MC13892_ADC=y +# CONFIG_MXC_MC13892_RTC is not set +# CONFIG_MXC_MC13892_LIGHT is not set +# CONFIG_MXC_MC13892_BATTERY is not set +# CONFIG_MXC_MC13892_CONNECTIVITY is not set +# CONFIG_MXC_MC13892_POWER is not set +# CONFIG_MXC_PMIC_MC9S08DZ60 is not set + +# +# MXC Security Drivers +# +# CONFIG_MXC_SECURITY_SCC is not set +# CONFIG_MXC_SECURITY_SCC2 is not set + +# +# SAHARA2 Security Hardware Support +# +# CONFIG_MXC_SAHARA is not set + +# +# MXC MPEG4 Encoder Kernel module support +# +# CONFIG_MXC_HMP4E is not set + +# +# MXC HARDWARE EVENT +# +# CONFIG_MXC_HWEVENT is not set + +# +# MXC VPU(Video Processing Unit) support +# +CONFIG_MXC_VPU=y +CONFIG_MXC_VPU_IRAM=y +# CONFIG_MXC_VPU_DEBUG is not set + +# +# MXC Asynchronous Sample Rate Converter support +# + +# +# MXC Bluetooth support +# + +# +# Broadcom GPS ioctrl support +# + +# +# MXC Media Local Bus Driver +# + +# +# i.MX ADC support +# +# CONFIG_IMX_ADC is not set + +# +# MXC GPU support +# +CONFIG_MXC_AMD_GPU=y + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +CONFIG_JBD=y +CONFIG_JBD2=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +CONFIG_TMPFSDEV=y +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_CRYPTODEV is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/imx5_android_defconfig b/arch/arm/configs/imx5_android_defconfig new file mode 100644 index 000000000000..4b0de5e1495f --- /dev/null +++ b/arch/arm/configs/imx5_android_defconfig @@ -0,0 +1,2256 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.31 +# Fri Sep 17 14:25:25 2010 +# +CONFIG_ARM=y +CONFIG_HAVE_PWM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# +CONFIG_ASHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_MXS is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +CONFIG_IRAM_ALLOC=y +CONFIG_DMA_ZONE_SIZE=96 +CONFIG_UTMI_MXC=y + +# +# Freescale MXC Implementations +# +# CONFIG_ARCH_MX1 is not set +# CONFIG_ARCH_MX2 is not set +# CONFIG_ARCH_MX3 is not set +# CONFIG_ARCH_MX25 is not set +# CONFIG_ARCH_MX35 is not set +# CONFIG_ARCH_MX37 is not set +CONFIG_ARCH_MX5=y +CONFIG_MXC_SDMA_API=y +CONFIG_SDMA_IRAM=y +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_ARCH_MXC_HAS_NFC_V3=y +CONFIG_ARCH_MX51=y +CONFIG_ARCH_MX53=y +CONFIG_ARCH_MX50=y +CONFIG_MX5_OPTIONS=y +CONFIG_MX5_MULTI_ARCH=y +CONFIG_MACH_MX51_3DS=y +CONFIG_MACH_MX51_BABBAGE=y +CONFIG_MACH_MX53_EVK=y +CONFIG_MACH_MX50_ARM2=y +CONFIG_MACH_MX50_RDP=y + +# +# MX5x Options: +# +CONFIG_ARCH_MXC_HAS_NFC_V3_2=y +CONFIG_MXC_TZIC=y +CONFIG_ISP1504_MXC=y +# CONFIG_MXC_IRQ_PRIOR is not set +CONFIG_MXC_PWM=y +CONFIG_ARCH_HAS_RNGC=y +CONFIG_ARCH_MXC_IOMUX_V3=y +CONFIG_MXC_DVFS_PER=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HIGHMEM=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set +CONFIG_RUNTIME_PHYS_OFFSET=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw rootfstype=jffs2 ip=off" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_IMX=y +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HAS_WAKELOCK=y +CONFIG_HAS_EARLYSUSPEND=y +CONFIG_WAKELOCK=y +CONFIG_WAKELOCK_STAT=y +CONFIG_USER_WAKELOCK=y +CONFIG_EARLYSUSPEND=y +# CONFIG_NO_USER_SPACE_SCREEN_ACCESS_CONTROL is not set +# CONFIG_CONSOLE_EARLYSUSPEND is not set +CONFIG_FB_EARLYSUSPEND=y +CONFIG_APM_EMULATION=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=y +# CONFIG_BT_HCIBTSDIO is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +CONFIG_BT_HCIVHCI=y +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIMAX is not set +CONFIG_RFKILL=y +CONFIG_RFKILL_INPUT=y +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_MXC is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +CONFIG_MTD_MXC_DATAFLASH=y +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_IMX_NFC is not set +CONFIG_MTD_NAND_MXC_V3=y +# CONFIG_MTD_NAND_MXC_SWECC is not set +# CONFIG_MTD_NAND_MXC_FORCE_CE is not set +# CONFIG_MXC_NAND_LOW_LEVEL_ERASE is not set +CONFIG_MTD_NAND_GPMI_NFC=y +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +CONFIG_ANDROID_PMEM=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +CONFIG_UID_STAT=y +CONFIG_FSL_CACHE=y +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=m +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_PMP is not set +# CONFIG_SATA_AHCI_PLATFORM is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +# CONFIG_PATA_PLATFORM is not set +CONFIG_PATA_FSL=m +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=y +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set +# CONFIG_DM_DELAY is not set +CONFIG_DM_UEVENT=y +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_CS89x0 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +CONFIG_FEC=y +# CONFIG_FEC_1588 is not set +# CONFIG_FEC2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_HSO is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_APMPOWER is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_KEYBOARD_MXC=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +CONFIG_TOUCHSCREEN_MXC=y +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_UINPUT=y +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_FM_SI4702=m +CONFIG_MXC_IIM=y +CONFIG_MXS_VIIM=y +CONFIG_IMX_SIM=m + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_MXC=y +CONFIG_SERIAL_MXC_CONSOLE=y +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_IMX is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_FSL_OTP=y +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_HW_RANDOM_FSL_RNGC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_IMX is not set +CONFIG_I2C_MXC=y +CONFIG_I2C_MXC_HS=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_I2C_SLAVE is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_MXC=y +# CONFIG_SPI_MXC_TEST_LOOPBACK is not set +CONFIG_SPI_MXC_SELECT1=y +# CONFIG_SPI_MXC_SELECT2 is not set +# CONFIG_SPI_MXC_SELECT3 is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +CONFIG_W1=m +CONFIG_W1_CON=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=m +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2751 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +CONFIG_W1_SLAVE_DS2438=m +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +CONFIG_APM_POWER=y +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_SENSORS_ISL29003=y +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_MXC_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TDA9875 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set + +# +# RDS decoders +# +# CONFIG_VIDEO_SAA6588 is not set + +# +# Video decoders +# +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_MT9V011 is not set +# CONFIG_VIDEO_TCM825X is not set +# CONFIG_VIDEO_SAA7110 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_SAA7191 is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_VPX3220 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_CX25840 is not set + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_THS7303 is not set +# CONFIG_VIDEO_ADV7343 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_VIVI is not set +CONFIG_VIDEO_MXC_CAMERA=y + +# +# MXC Camera/V4L2 PRP Features support +# +CONFIG_VIDEO_MXC_IPU_CAMERA=y +# CONFIG_VIDEO_MXC_CSI_CAMERA is not set +# CONFIG_MXC_CAMERA_MC521DA is not set +# CONFIG_MXC_EMMA_CAMERA_MICRON111 is not set +# CONFIG_MXC_CAMERA_OV2640_EMMA is not set +# CONFIG_MXC_CAMERA_MICRON111 is not set +# CONFIG_MXC_CAMERA_OV2640 is not set +CONFIG_MXC_CAMERA_OV3640=y +# CONFIG_MXC_TVIN_ADV7180 is not set +CONFIG_MXC_IPU_PRP_VF_SDC=y +CONFIG_MXC_IPU_PRP_ENC=y +CONFIG_MXC_IPU_CSI_ENC=y +CONFIG_VIDEO_MXC_OUTPUT=y +CONFIG_VIDEO_MXC_IPU_OUTPUT=y +# CONFIG_VIDEO_MXC_IPUV1_WVGA_OUTPUT is not set +# CONFIG_VIDEO_MXC_PXP_V4L2 is not set +# CONFIG_VIDEO_MXC_OPL is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=y +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SN9C20X is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_HDPVR is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_CX231XX is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_MXC=y +CONFIG_FB_MXC_SYNC_PANEL=y +CONFIG_FB_MXC_EPSON_VGA_SYNC_PANEL=y +CONFIG_FB_MXC_TVOUT_TVE=y +CONFIG_FB_MXC_LDB=y +# CONFIG_FB_MXC_CLAA_WVGA_SYNC_PANEL is not set +# CONFIG_FB_MXC_SII9022 is not set +CONFIG_FB_MXC_CH7026=y +# CONFIG_FB_MXC_TVOUT_CH7024 is not set +# CONFIG_FB_MXC_ASYNC_PANEL is not set +CONFIG_FB_MXC_EINK_PANEL=y +# CONFIG_FB_MXC_EINK_AUTO_UPDATE_MODE is not set +# CONFIG_FB_MXC_ELCDIF_FB is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_PWM=y +CONFIG_BACKLIGHT_MXC=y +CONFIG_BACKLIGHT_MXC_MC13892=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_MXC_SPDIF=m +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_SND_MXC_SOC=y +CONFIG_SND_MXC_SOC_SSI=y +CONFIG_SND_MXC_SOC_IRAM=y +CONFIG_SND_SOC_IMX_3STACK_SGTL5000=y +# CONFIG_SND_SOC_IMX_3STACK_AK4647 is not set +# CONFIG_SND_SOC_IMX_3STACK_WM8580 is not set +# CONFIG_SND_SOC_IMX_3STACK_AK5702 is not set +# CONFIG_SND_SOC_IMX_3STACK_BLUETOOTH is not set +# CONFIG_SND_SOC_IMX_3STACK_CS42888 is not set +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_SGTL5000=y +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +# CONFIG_HID_DRAGONRISE is not set +CONFIG_HID_EZKEY=m +# CONFIG_HID_KYE is not set +CONFIG_HID_GYRATION=m +# CONFIG_HID_KENSINGTON is not set +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ARC=y +CONFIG_USB_EHCI_ARC_OTG=y +# CONFIG_USB_STATIC_IRAM is not set +# CONFIG_USB_EHCI_FSL_MC13783 is not set +# CONFIG_USB_EHCI_FSL_1301 is not set +# CONFIG_USB_EHCI_FSL_1504 is not set +CONFIG_USB_EHCI_FSL_UTMI=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=y +# CONFIG_USB_SERIAL_CONSOLE is not set +# CONFIG_USB_EZUSB is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +CONFIG_USB_SERIAL_OPTION=y +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +CONFIG_USB_GADGET_ARC=y +# CONFIG_USB_STATIC_IRAM_PPH is not set +CONFIG_USB_ARC=y +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_USB_ANDROID=y +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MXC_OTG=y +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set +CONFIG_SDIO_UNIFI_FS=m + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_MXC is not set +CONFIG_MMC_IMX_ESDHCI=y +# CONFIG_MMC_IMX_ESDHCI_PIO_MODE is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_MC13892=y +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set +CONFIG_SWITCH=y +# CONFIG_SWITCH_GPIO is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_INTF_ALARM=y +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_MXC is not set +# CONFIG_RTC_DRV_MXC_V2 is not set +# CONFIG_RTC_DRV_IMXDI is not set +CONFIG_RTC_MC13892=y +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_MXC_PXP=y +CONFIG_MXC_PXP_CLIENT_DEVICE=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_LP3971 is not set +CONFIG_REGULATOR_MC13892=y +CONFIG_REGULATOR_MAX17135=y +CONFIG_UIO=y +# CONFIG_UIO_PDRV is not set +CONFIG_UIO_PDRV_GENIRQ=m +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_MEILHAUS is not set +# CONFIG_USB_IP_COMMON is not set +# CONFIG_ECHO is not set +# CONFIG_COMEDI is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_INPUT_MIMIO is not set +# CONFIG_TRANZPORT is not set + +# +# Android +# +CONFIG_ANDROID=y +CONFIG_ANDROID_BINDER_IPC=y +CONFIG_ANDROID_LOGGER=y +CONFIG_ANDROID_RAM_CONSOLE=y +CONFIG_ANDROID_RAM_CONSOLE_ENABLE_VERBOSE=y +# CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION is not set +# CONFIG_ANDROID_RAM_CONSOLE_EARLY_INIT is not set +CONFIG_ANDROID_TIMED_OUTPUT=y +CONFIG_ANDROID_TIMED_GPIO=y +CONFIG_ANDROID_LOW_MEMORY_KILLER=y +# CONFIG_DST is not set +# CONFIG_POHMELFS is not set +# CONFIG_PLAN9AUTH is not set +# CONFIG_LINE6_USB is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_USB_CPC is not set +# CONFIG_FB_UDL is not set + +# +# MXC support drivers +# +CONFIG_MXC_IPU=y +CONFIG_MXC_IPU_V3=y + +# +# MXC SSI support +# +# CONFIG_MXC_SSI is not set + +# +# MXC Digital Audio Multiplexer support +# +# CONFIG_MXC_DAM is not set + +# +# MXC PMIC support +# +CONFIG_MXC_PMIC=y +# CONFIG_MXC_PMIC_MC13783 is not set +CONFIG_MXC_PMIC_MC13892=y +CONFIG_MXC_PMIC_I2C=y +CONFIG_MXC_PMIC_SPI=y +# CONFIG_MXC_PMIC_MC34704 is not set +# CONFIG_MXC_PMIC_MC9SDZ60 is not set +# CONFIG_MXC_PMIC_CHARDEV is not set + +# +# MXC PMIC Client Drivers +# +CONFIG_MXC_MC13892_ADC=y +CONFIG_MXC_MC13892_RTC=y +CONFIG_MXC_MC13892_LIGHT=y +CONFIG_MXC_MC13892_BATTERY=y +CONFIG_MXC_MC13892_CONNECTIVITY=y +CONFIG_MXC_MC13892_POWER=y +# CONFIG_MXC_PMIC_MC9S08DZ60 is not set + +# +# MXC Security Drivers +# +# CONFIG_MXC_SECURITY_SCC is not set +# CONFIG_MXC_SECURITY_SCC2 is not set +# CONFIG_MXC_SECURITY_RNG is not set + +# +# SAHARA2 Security Hardware Support +# +# CONFIG_MXC_SAHARA is not set + +# +# MXC MPEG4 Encoder Kernel module support +# +# CONFIG_MXC_HMP4E is not set + +# +# MXC HARDWARE EVENT +# +# CONFIG_MXC_HWEVENT is not set + +# +# MXC VPU(Video Processing Unit) support +# +CONFIG_MXC_VPU=y +CONFIG_MXC_VPU_IRAM=y +# CONFIG_MXC_VPU_DEBUG is not set + +# +# MXC Asynchronous Sample Rate Converter support +# + +# +# MXC Bluetooth support +# +CONFIG_MXC_BLUETOOTH=m + +# +# Broadcom GPS ioctrl support +# +CONFIG_GPS_IOCTRL=m + +# +# MXC Media Local Bus Driver +# +# CONFIG_MXC_MLB is not set + +# +# i.MX ADC support +# +# CONFIG_IMX_ADC is not set + +# +# MXC GPU support +# +CONFIG_MXC_AMD_GPU=y + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +CONFIG_JBD2=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_CRYPTODEV is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRYPTO_TWOFISH_COMMON=y + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_DCP is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/imx5_updater_defconfig b/arch/arm/configs/imx5_updater_defconfig new file mode 100644 index 000000000000..f594185b5e0a --- /dev/null +++ b/arch/arm/configs/imx5_updater_defconfig @@ -0,0 +1,1697 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.31 +# Tue Jul 27 15:14:58 2010 +# +CONFIG_ARM=y +CONFIG_HAVE_PWM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Performance Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_MXS is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +CONFIG_IRAM_ALLOC=y +CONFIG_DMA_ZONE_SIZE=96 +CONFIG_UTMI_MXC=y + +# +# Freescale MXC Implementations +# +# CONFIG_ARCH_MX1 is not set +# CONFIG_ARCH_MX2 is not set +# CONFIG_ARCH_MX3 is not set +# CONFIG_ARCH_MX25 is not set +# CONFIG_ARCH_MX35 is not set +# CONFIG_ARCH_MX37 is not set +CONFIG_ARCH_MX5=y +CONFIG_MXC_SDMA_API=y +CONFIG_SDMA_IRAM=y +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_ARCH_MXC_HAS_NFC_V3=y +CONFIG_ARCH_MX51=y +CONFIG_ARCH_MX53=y +CONFIG_ARCH_MX50=y +CONFIG_MX5_OPTIONS=y +CONFIG_MX5_MULTI_ARCH=y +CONFIG_MACH_MX51_3DS=y +CONFIG_MACH_MX51_BABBAGE=y +CONFIG_MACH_MX53_EVK=y +CONFIG_MACH_MX50_ARM2=y + +# +# MX5x Options: +# +CONFIG_ARCH_MXC_HAS_NFC_V3_2=y +CONFIG_MXC_TZIC=y +CONFIG_ISP1504_MXC=y +# CONFIG_MXC_IRQ_PRIOR is not set +CONFIG_MXC_PWM=y +CONFIG_ARCH_MXC_IOMUX_V3=y +CONFIG_MXC_DVFS_PER=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_VMSPLIT_3G is not set +CONFIG_VMSPLIT_2G=y +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HIGHMEM=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set +CONFIG_RUNTIME_PHYS_OFFSET=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw rootfstype=jffs2 ip=off" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_IMX=y +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_MXC is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +CONFIG_MTD_MXC_DATAFLASH=y +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_IMX_NFC is not set +CONFIG_MTD_NAND_MXC_V3=y +# CONFIG_MTD_NAND_MXC_SWECC is not set +# CONFIG_MTD_NAND_MXC_FORCE_CE is not set +# CONFIG_MXC_NAND_LOW_LEVEL_ERASE is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_MTD_UBI_BLOCK is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_APMPOWER is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_KEYBOARD_MXC=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +CONFIG_TOUCHSCREEN_MXC=y +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_UINPUT=y +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_FM_SI4702=y +CONFIG_MXC_IIM=y +CONFIG_IMX_SIM=y + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_MXC=y +CONFIG_SERIAL_MXC_CONSOLE=y +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_IMX is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +CONFIG_FSL_OTP=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_IMX is not set +CONFIG_I2C_MXC=y +CONFIG_I2C_MXC_HS=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_I2C_SLAVE is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_MXC=y +# CONFIG_SPI_MXC_TEST_LOOPBACK is not set +CONFIG_SPI_MXC_SELECT1=y +# CONFIG_SPI_MXC_SELECT2 is not set +# CONFIG_SPI_MXC_SELECT3 is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_DS2482 is not set +CONFIG_W1_MASTER_MXC=y +# CONFIG_W1_MASTER_GPIO is not set + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2751 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +CONFIG_W1_SLAVE_DS2438=y +# CONFIG_W1_SLAVE_DS2760 is not set +# CONFIG_W1_SLAVE_BQ27000 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +CONFIG_APM_POWER=y +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_SENSORS_ISL29003=y +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=y +CONFIG_MXC_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_MXC=y +CONFIG_FB_MXC_SYNC_PANEL=y +# CONFIG_FB_MXC_EPSON_VGA_SYNC_PANEL is not set +# CONFIG_FB_MXC_TVOUT_TVE is not set +# CONFIG_FB_MXC_LDB is not set +# CONFIG_FB_MXC_CLAA_WVGA_SYNC_PANEL is not set +# CONFIG_FB_MXC_CH7026 is not set +# CONFIG_FB_MXC_TVOUT_CH7024 is not set +# CONFIG_FB_MXC_ASYNC_PANEL is not set +# CONFIG_FB_MXC_EINK_PANEL is not set +# CONFIG_FB_MXC_ELCDIF_FB is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_PWM=y +CONFIG_BACKLIGHT_MXC=y +CONFIG_BACKLIGHT_MXC_MC13892=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +# CONFIG_HID_DRAGONRISE is not set +CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set +CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ARC=y +# CONFIG_USB_EHCI_ARC_OTG is not set +# CONFIG_USB_STATIC_IRAM is not set +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +CONFIG_USB_GADGET_ARC=y +# CONFIG_USB_STATIC_IRAM_PPH is not set +CONFIG_USB_ARC=y +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=y +CONFIG_FSL_UTP=y +# CONFIG_USB_FILE_STORAGE_TEST is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_MXC_OTG is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set +CONFIG_SDIO_UNIFI_FS=y + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_MXC is not set +CONFIG_MMC_IMX_ESDHCI=y +# CONFIG_MMC_IMX_ESDHCI_PIO_MODE is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_MC13892=y +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_MXC is not set +# CONFIG_RTC_DRV_MXC_V2 is not set +# CONFIG_RTC_DRV_IMXDI is not set +CONFIG_RTC_MC13892=y +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_MXC_PXP=y +CONFIG_MXC_PXP_CLIENT_DEVICE=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_LP3971 is not set +CONFIG_REGULATOR_MC13892=y +CONFIG_REGULATOR_MAX17135=y +CONFIG_UIO=y +# CONFIG_UIO_PDRV is not set +CONFIG_UIO_PDRV_GENIRQ=y +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_STAGING is not set + +# +# MXC support drivers +# +CONFIG_MXC_IPU=y +CONFIG_MXC_IPU_V3=y + +# +# MXC SSI support +# +# CONFIG_MXC_SSI is not set + +# +# MXC Digital Audio Multiplexer support +# +# CONFIG_MXC_DAM is not set + +# +# MXC PMIC support +# +CONFIG_MXC_PMIC=y +# CONFIG_MXC_PMIC_MC13783 is not set +CONFIG_MXC_PMIC_MC13892=y +CONFIG_MXC_PMIC_I2C=y +CONFIG_MXC_PMIC_SPI=y +# CONFIG_MXC_PMIC_MC34704 is not set +# CONFIG_MXC_PMIC_MC9SDZ60 is not set +# CONFIG_MXC_PMIC_CHARDEV is not set + +# +# MXC PMIC Client Drivers +# +CONFIG_MXC_MC13892_ADC=y +CONFIG_MXC_MC13892_RTC=y +CONFIG_MXC_MC13892_LIGHT=y +CONFIG_MXC_MC13892_BATTERY=y +CONFIG_MXC_MC13892_CONNECTIVITY=y +CONFIG_MXC_MC13892_POWER=y +# CONFIG_MXC_PMIC_MC9S08DZ60 is not set + +# +# MXC Security Drivers +# +# CONFIG_MXC_SECURITY_SCC is not set +# CONFIG_MXC_SECURITY_SCC2 is not set +# CONFIG_MXC_SECURITY_RNG is not set + +# +# SAHARA2 Security Hardware Support +# +# CONFIG_MXC_SAHARA is not set + +# +# MXC MPEG4 Encoder Kernel module support +# +# CONFIG_MXC_HMP4E is not set + +# +# MXC HARDWARE EVENT +# +# CONFIG_MXC_HWEVENT is not set + +# +# MXC VPU(Video Processing Unit) support +# +# CONFIG_MXC_VPU is not set +# CONFIG_MXC_VPU_IRAM is not set + +# +# MXC Asynchronous Sample Rate Converter support +# + +# +# MXC Bluetooth support +# +CONFIG_MXC_BLUETOOTH=y + +# +# Broadcom GPS ioctrl support +# +CONFIG_GPS_IOCTRL=y + +# +# MXC Media Local Bus Driver +# +CONFIG_MXC_MLB=y + +# +# i.MX ADC support +# +# CONFIG_IMX_ADC is not set + +# +# MXC GPU support +# +# CONFIG_MXC_AMD_GPU is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +CONFIG_JBD=y +CONFIG_JBD2=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +CONFIG_FRAME_POINTER=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_ARM_UNWIND is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +CONFIG_SECURITY_FILE_CAPABILITIES=y +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_CRYPTODEV is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-mx23/include/mach/regs-ocotp.h b/arch/arm/mach-mx23/include/mach/regs-ocotp.h new file mode 100644 index 000000000000..b0313dd67f93 --- /dev/null +++ b/arch/arm/mach-mx23/include/mach/regs-ocotp.h @@ -0,0 +1,311 @@ +/* + * Freescale OCOTP Register Definitions + * + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This file is created by xml file. Don't Edit it. + * + * Xml Revision: 1.21 + * Template revision: 26195 + */ + +#ifndef __ARCH_ARM___OCOTP_H +#define __ARCH_ARM___OCOTP_H + + +#define HW_OCOTP_CTRL (0x00000000) +#define HW_OCOTP_CTRL_SET (0x00000004) +#define HW_OCOTP_CTRL_CLR (0x00000008) +#define HW_OCOTP_CTRL_TOG (0x0000000c) + +#define BP_OCOTP_CTRL_WR_UNLOCK 16 +#define BM_OCOTP_CTRL_WR_UNLOCK 0xFFFF0000 +#define BF_OCOTP_CTRL_WR_UNLOCK(v) \ + (((v) << 16) & BM_OCOTP_CTRL_WR_UNLOCK) +#define BV_OCOTP_CTRL_WR_UNLOCK__KEY 0x3E77 +#define BP_OCOTP_CTRL_RSRVD2 14 +#define BM_OCOTP_CTRL_RSRVD2 0x0000C000 +#define BF_OCOTP_CTRL_RSRVD2(v) \ + (((v) << 14) & BM_OCOTP_CTRL_RSRVD2) +#define BM_OCOTP_CTRL_RELOAD_SHADOWS 0x00002000 +#define BM_OCOTP_CTRL_RD_BANK_OPEN 0x00001000 +#define BP_OCOTP_CTRL_RSRVD1 10 +#define BM_OCOTP_CTRL_RSRVD1 0x00000C00 +#define BF_OCOTP_CTRL_RSRVD1(v) \ + (((v) << 10) & BM_OCOTP_CTRL_RSRVD1) +#define BM_OCOTP_CTRL_ERROR 0x00000200 +#define BM_OCOTP_CTRL_BUSY 0x00000100 +#define BP_OCOTP_CTRL_RSRVD0 5 +#define BM_OCOTP_CTRL_RSRVD0 0x000000E0 +#define BF_OCOTP_CTRL_RSRVD0(v) \ + (((v) << 5) & BM_OCOTP_CTRL_RSRVD0) +#define BP_OCOTP_CTRL_ADDR 0 +#define BM_OCOTP_CTRL_ADDR 0x0000001F +#define BF_OCOTP_CTRL_ADDR(v) \ + (((v) << 0) & BM_OCOTP_CTRL_ADDR) + +#define HW_OCOTP_DATA (0x00000010) + +#define BP_OCOTP_DATA_DATA 0 +#define BM_OCOTP_DATA_DATA 0xFFFFFFFF +#define BF_OCOTP_DATA_DATA(v) (v) + +/* + * multi-register-define name HW_OCOTP_CUSTn + * base 0x00000020 + * count 4 + * offset 0x10 + */ +#define HW_OCOTP_CUSTn(n) (0x00000020 + (n) * 0x10) +#define BP_OCOTP_CUSTn_BITS 0 +#define BM_OCOTP_CUSTn_BITS 0xFFFFFFFF +#define BF_OCOTP_CUSTn_BITS(v) (v) + +/* + * multi-register-define name HW_OCOTP_CRYPTOn + * base 0x00000060 + * count 4 + * offset 0x10 + */ +#define HW_OCOTP_CRYPTOn(n) (0x00000060 + (n) * 0x10) +#define BP_OCOTP_CRYPTOn_BITS 0 +#define BM_OCOTP_CRYPTOn_BITS 0xFFFFFFFF +#define BF_OCOTP_CRYPTOn_BITS(v) (v) + +/* + * multi-register-define name HW_OCOTP_HWCAPn + * base 0x000000A0 + * count 6 + * offset 0x10 + */ +#define HW_OCOTP_HWCAPn(n) (0x000000a0 + (n) * 0x10) +#define BP_OCOTP_HWCAPn_BITS 0 +#define BM_OCOTP_HWCAPn_BITS 0xFFFFFFFF +#define BF_OCOTP_HWCAPn_BITS(v) (v) + +#define HW_OCOTP_SWCAP (0x00000100) + +#define BP_OCOTP_SWCAP_BITS 0 +#define BM_OCOTP_SWCAP_BITS 0xFFFFFFFF +#define BF_OCOTP_SWCAP_BITS(v) (v) + +#define HW_OCOTP_CUSTCAP (0x00000110) + +#define BM_OCOTP_CUSTCAP_CUST_DISABLE_WMADRM9 0x80000000 +#define BM_OCOTP_CUSTCAP_CUST_DISABLE_JANUSDRM10 0x40000000 +#define BP_OCOTP_CUSTCAP_RSRVD1 5 +#define BM_OCOTP_CUSTCAP_RSRVD1 0x3FFFFFE0 +#define BF_OCOTP_CUSTCAP_RSRVD1(v) \ + (((v) << 5) & BM_OCOTP_CUSTCAP_RSRVD1) +#define BM_OCOTP_CUSTCAP_ENABLE_SJTAG_12MA_DRIVE 0x00000010 +#define BM_OCOTP_CUSTCAP_USE_PARALLEL_JTAG 0x00000008 +#define BM_OCOTP_CUSTCAP_RTC_XTAL_32768_PRESENT 0x00000004 +#define BM_OCOTP_CUSTCAP_RTC_XTAL_32000_PRESENT 0x00000002 +#define BM_OCOTP_CUSTCAP_RSRVD0 0x00000001 + +#define HW_OCOTP_LOCK (0x00000120) + +#define BM_OCOTP_LOCK_ROM7 0x80000000 +#define BM_OCOTP_LOCK_ROM6 0x40000000 +#define BM_OCOTP_LOCK_ROM5 0x20000000 +#define BM_OCOTP_LOCK_ROM4 0x10000000 +#define BM_OCOTP_LOCK_ROM3 0x08000000 +#define BM_OCOTP_LOCK_ROM2 0x04000000 +#define BM_OCOTP_LOCK_ROM1 0x02000000 +#define BM_OCOTP_LOCK_ROM0 0x01000000 +#define BM_OCOTP_LOCK_HWSW_SHADOW_ALT 0x00800000 +#define BM_OCOTP_LOCK_CRYPTODCP_ALT 0x00400000 +#define BM_OCOTP_LOCK_CRYPTOKEY_ALT 0x00200000 +#define BM_OCOTP_LOCK_PIN 0x00100000 +#define BM_OCOTP_LOCK_OPS 0x00080000 +#define BM_OCOTP_LOCK_UN2 0x00040000 +#define BM_OCOTP_LOCK_UN1 0x00020000 +#define BM_OCOTP_LOCK_UN0 0x00010000 +#define BP_OCOTP_LOCK_UNALLOCATED 11 +#define BM_OCOTP_LOCK_UNALLOCATED 0x0000F800 +#define BF_OCOTP_LOCK_UNALLOCATED(v) \ + (((v) << 11) & BM_OCOTP_LOCK_UNALLOCATED) +#define BM_OCOTP_LOCK_ROM_SHADOW 0x00000400 +#define BM_OCOTP_LOCK_CUSTCAP 0x00000200 +#define BM_OCOTP_LOCK_HWSW 0x00000100 +#define BM_OCOTP_LOCK_CUSTCAP_SHADOW 0x00000080 +#define BM_OCOTP_LOCK_HWSW_SHADOW 0x00000040 +#define BM_OCOTP_LOCK_CRYPTODCP 0x00000020 +#define BM_OCOTP_LOCK_CRYPTOKEY 0x00000010 +#define BM_OCOTP_LOCK_CUST3 0x00000008 +#define BM_OCOTP_LOCK_CUST2 0x00000004 +#define BM_OCOTP_LOCK_CUST1 0x00000002 +#define BM_OCOTP_LOCK_CUST0 0x00000001 + +/* + * multi-register-define name HW_OCOTP_OPSn + * base 0x00000130 + * count 4 + * offset 0x10 + */ +#define HW_OCOTP_OPSn(n) (0x00000130 + (n) * 0x10) +#define BP_OCOTP_OPSn_BITS 0 +#define BM_OCOTP_OPSn_BITS 0xFFFFFFFF +#define BF_OCOTP_OPSn_BITS(v) (v) + +/* + * multi-register-define name HW_OCOTP_UNn + * base 0x00000170 + * count 3 + * offset 0x10 + */ +#define HW_OCOTP_UNn(n) (0x00000170 + (n) * 0x10) +#define BP_OCOTP_UNn_BITS 0 +#define BM_OCOTP_UNn_BITS 0xFFFFFFFF +#define BF_OCOTP_UNn_BITS(v) (v) + +#define HW_OCOTP_ROM0 (0x000001a0) + +#define BP_OCOTP_ROM0_BOOT_MODE 24 +#define BM_OCOTP_ROM0_BOOT_MODE 0xFF000000 +#define BF_OCOTP_ROM0_BOOT_MODE(v) \ + (((v) << 24) & BM_OCOTP_ROM0_BOOT_MODE) +#define BM_OCOTP_ROM0_ENABLE_PJTAG_12MA_DRIVE 0x00800000 +#define BM_OCOTP_ROM0_USE_PARALLEL_JTAG 0x00400000 +#define BP_OCOTP_ROM0_SD_POWER_GATE_GPIO 20 +#define BM_OCOTP_ROM0_SD_POWER_GATE_GPIO 0x00300000 +#define BF_OCOTP_ROM0_SD_POWER_GATE_GPIO(v) \ + (((v) << 20) & BM_OCOTP_ROM0_SD_POWER_GATE_GPIO) +#define BP_OCOTP_ROM0_SD_POWER_UP_DELAY 14 +#define BM_OCOTP_ROM0_SD_POWER_UP_DELAY 0x000FC000 +#define BF_OCOTP_ROM0_SD_POWER_UP_DELAY(v) \ + (((v) << 14) & BM_OCOTP_ROM0_SD_POWER_UP_DELAY) +#define BP_OCOTP_ROM0_SD_BUS_WIDTH 12 +#define BM_OCOTP_ROM0_SD_BUS_WIDTH 0x00003000 +#define BF_OCOTP_ROM0_SD_BUS_WIDTH(v) \ + (((v) << 12) & BM_OCOTP_ROM0_SD_BUS_WIDTH) +#define BP_OCOTP_ROM0_SSP_SCK_INDEX 8 +#define BM_OCOTP_ROM0_SSP_SCK_INDEX 0x00000F00 +#define BF_OCOTP_ROM0_SSP_SCK_INDEX(v) \ + (((v) << 8) & BM_OCOTP_ROM0_SSP_SCK_INDEX) +#define BM_OCOTP_ROM0_RSRVD3 0x00000080 +#define BM_OCOTP_ROM0_DISABLE_SPI_NOR_FAST_ READ 0x00000040 +#define BM_OCOTP_ROM0_ENABLE_USB_BOOT_SERIAL_NUM 0x00000020 +#define BM_OCOTP_ROM0_ENABLE_UNENCRYPTED_ BOOT 0x00000010 +#define BM_OCOTP_ROM0_SD_MBR_BOOT 0x00000008 +#define BM_OCOTP_ROM0_RSRVD2 0x00000004 +#define BM_OCOTP_ROM0_RSRVD1 0x00000002 +#define BM_OCOTP_ROM0_RSRVD0 0x00000001 + +#define HW_OCOTP_ROM1 (0x000001b0) + +#define BP_OCOTP_ROM1_RSRVD1 30 +#define BM_OCOTP_ROM1_RSRVD1 0xC0000000 +#define BF_OCOTP_ROM1_RSRVD1(v) \ + (((v) << 30) & BM_OCOTP_ROM1_RSRVD1) +#define BP_OCOTP_ROM1_USE_ALT_GPMI_RDY3 28 +#define BM_OCOTP_ROM1_USE_ALT_GPMI_RDY3 0x30000000 +#define BF_OCOTP_ROM1_USE_ALT_GPMI_RDY3(v) \ + (((v) << 28) & BM_OCOTP_ROM1_USE_ALT_GPMI_RDY3) +#define BP_OCOTP_ROM1_USE_ALT_GPMI_CE3 26 +#define BM_OCOTP_ROM1_USE_ALT_GPMI_CE3 0x0C000000 +#define BF_OCOTP_ROM1_USE_ALT_GPMI_CE3(v) \ + (((v) << 26) & BM_OCOTP_ROM1_USE_ALT_GPMI_CE3) +#define BM_OCOTP_ROM1_USE_ALT_GPMI_RDY2 0x02000000 +#define BM_OCOTP_ROM1_USE_ALT_GPMI_CE2 0x01000000 +#define BM_OCOTP_ROM1_ENABLE_NAND3_CE_RDY_PULLUP 0x00800000 +#define BM_OCOTP_ROM1_ENABLE_NAND2_CE_RDY_PULLUP 0x00400000 +#define BM_OCOTP_ROM1_ENABLE_NAND1_CE_RDY_PULLUP 0x00200000 +#define BM_OCOTP_ROM1_ENABLE_NAND0_CE_RDY_PULLUP 0x00100000 +#define BM_OCOTP_ROM1_UNTOUCH_INTERNAL_SSP_PULLUP 0x00080000 +#define BM_OCOTP_ROM1_SSP2_EXT_PULLUP 0x00040000 +#define BM_OCOTP_ROM1_SSP1_EXT_PULLUP 0x00020000 +#define BM_OCOTP_ROM1_SD_INCREASE_INIT_SEQ_TIME 0x00010000 +#define BM_OCOTP_ROM1_SD_INIT_SEQ_2_ENABLE 0x00008000 +#define BM_OCOTP_ROM1_SD_CMD0_DISABLE 0x00004000 +#define BM_OCOTP_ROM1_SD_INIT_SEQ_1_DISABLE 0x00002000 +#define BM_OCOTP_ROM1_USE_ALT_SSP1_DATA4_7 0x00001000 +#define BP_OCOTP_ROM1_BOOT_SEARCH_COUNT 8 +#define BM_OCOTP_ROM1_BOOT_SEARCH_COUNT 0x00000F00 +#define BF_OCOTP_ROM1_BOOT_SEARCH_COUNT(v) \ + (((v) << 8) & BM_OCOTP_ROM1_BOOT_SEARCH_COUNT) +#define BP_OCOTP_ROM1_RSRVD0 3 +#define BM_OCOTP_ROM1_RSRVD0 0x000000F8 +#define BF_OCOTP_ROM1_RSRVD0(v) \ + (((v) << 3) & BM_OCOTP_ROM1_RSRVD0) +#define BP_OCOTP_ROM1_NUMBER_OF_NANDS 0 +#define BM_OCOTP_ROM1_NUMBER_OF_NANDS 0x00000007 +#define BF_OCOTP_ROM1_NUMBER_OF_NANDS(v) \ + (((v) << 0) & BM_OCOTP_ROM1_NUMBER_OF_NANDS) + +#define HW_OCOTP_ROM2 (0x000001c0) + +#define BP_OCOTP_ROM2_USB_VID 16 +#define BM_OCOTP_ROM2_USB_VID 0xFFFF0000 +#define BF_OCOTP_ROM2_USB_VID(v) \ + (((v) << 16) & BM_OCOTP_ROM2_USB_VID) +#define BP_OCOTP_ROM2_USB_PID 0 +#define BM_OCOTP_ROM2_USB_PID 0x0000FFFF +#define BF_OCOTP_ROM2_USB_PID(v) \ + (((v) << 0) & BM_OCOTP_ROM2_USB_PID) + +#define HW_OCOTP_ROM3 (0x000001d0) + +#define BP_OCOTP_ROM3_RSRVD1 10 +#define BM_OCOTP_ROM3_RSRVD1 0xFFFFFC00 +#define BF_OCOTP_ROM3_RSRVD1(v) \ + (((v) << 10) & BM_OCOTP_ROM3_RSRVD1) +#define BP_OCOTP_ROM3_RSRVD0 0 +#define BM_OCOTP_ROM3_RSRVD0 0x000003FF +#define BF_OCOTP_ROM3_RSRVD0(v) \ + (((v) << 0) & BM_OCOTP_ROM3_RSRVD0) + +#define HW_OCOTP_ROM4 (0x000001e0) + +#define BP_OCOTP_ROM4_BITS 0 +#define BM_OCOTP_ROM4_BITS 0xFFFFFFFF +#define BF_OCOTP_ROM4_BITS(v) (v) + +#define HW_OCOTP_ROM5 (0x000001f0) + +#define BP_OCOTP_ROM5_BITS 0 +#define BM_OCOTP_ROM5_BITS 0xFFFFFFFF +#define BF_OCOTP_ROM5_BITS(v) (v) + +#define HW_OCOTP_ROM6 (0x00000200) + +#define BP_OCOTP_ROM6_BITS 0 +#define BM_OCOTP_ROM6_BITS 0xFFFFFFFF +#define BF_OCOTP_ROM6_BITS(v) (v) + +#define HW_OCOTP_ROM7 (0x00000210) + +#define BP_OCOTP_ROM7_BITS 0 +#define BM_OCOTP_ROM7_BITS 0xFFFFFFFF +#define BF_OCOTP_ROM7_BITS(v) (v) + +#define HW_OCOTP_VERSION (0x00000220) + +#define BP_OCOTP_VERSION_MAJOR 24 +#define BM_OCOTP_VERSION_MAJOR 0xFF000000 +#define BF_OCOTP_VERSION_MAJOR(v) \ + (((v) << 24) & BM_OCOTP_VERSION_MAJOR) +#define BP_OCOTP_VERSION_MINOR 16 +#define BM_OCOTP_VERSION_MINOR 0x00FF0000 +#define BF_OCOTP_VERSION_MINOR(v) \ + (((v) << 16) & BM_OCOTP_VERSION_MINOR) +#define BP_OCOTP_VERSION_STEP 0 +#define BM_OCOTP_VERSION_STEP 0x0000FFFF +#define BF_OCOTP_VERSION_STEP(v) \ + (((v) << 0) & BM_OCOTP_VERSION_STEP) +#endif /* __ARCH_ARM___OCOTP_H */ diff --git a/arch/arm/mach-mx23/otp.c b/arch/arm/mach-mx23/otp.c new file mode 100644 index 000000000000..7bec45f3754c --- /dev/null +++ b/arch/arm/mach-mx23/otp.c @@ -0,0 +1,437 @@ +/* + * Unique ID manipulation: Freescale STMP378X OTP bits read/write procedures + * + * Author: dmitry pervushin <dimka@embeddedalley.com> + * + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/kobject.h> +#include <linux/string.h> +#include <linux/sysfs.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/fcntl.h> +#include <linux/mutex.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <mach/unique-id.h> +#include <mach/regs-ocotp.h> +#include <mach/regs-power.h> +#include <mach/mx23.h> + +static DEFINE_MUTEX(otp_mutex); +static unsigned otp_mode; +static unsigned long otp_hclk_saved; +static u32 otp_voltage_saved; + +static int otp_full; /* = 0. By default, show/set only customer bits */ +#define OTP_USER_OFFSET 0 +#define OTP_USER_SIZE 4 + +#define REGS_OCOTP_BASE (IO_ADDRESS(OCOTP_PHYS_ADDR)) +#define BF(value, field) (((value) << BP_##field) & BM_##field) +/** + * otp_wait_busy - wait for completion of operation + * + * @flags: flags that should be clear in addition to _BUSY and _ERROR + * + * Returns 0 on success or -ETIMEDOUT on error + **/ +static int otp_wait_busy(u32 flags) +{ + int count; + u32 c; + + for (count = 10000; count >= 0; count--) { + c = __raw_readl(REGS_OCOTP_BASE + HW_OCOTP_CTRL); + if (!(c & (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR | flags))) + break; + cpu_relax(); + } + if (count < 0) + return -ETIMEDOUT; + return 0; +} + +/** + * otp_open - open OTP bits for read or write access + * + * @mode: either O_RDONLY or O_WRONLY + * + * Returns 0 on success, error code otherwise + **/ +static int otp_open(int mode) +{ + int r; + struct clk *hclk; + int err; + + if (!mutex_trylock(&otp_mutex)) { + printk(KERN_ERR"%s: already opened\n", __func__); + return -EAGAIN; + } + + if (mode == O_RDONLY) { + pr_debug("%s: read-only mode\n", __func__); + + r = otp_wait_busy(0); + if (r) { + err = -ETIMEDOUT; + goto out; + } + + /* 2. Set RD_BANK_OPEN */ + __raw_writel(BM_OCOTP_CTRL_RD_BANK_OPEN, REGS_OCOTP_BASE + HW_OCOTP_CTRL_SET); + udelay(10); + + otp_wait_busy(0); + } + + else if (mode == O_WRONLY) { + pr_debug("%s: write-only mode\n", __func__); + hclk = clk_get(NULL, "hclk"); + if (IS_ERR(hclk)) { + err = PTR_ERR(hclk); + goto out; + } + + /* + WARNING ACHTUNG UWAGA + + the code below changes HCLK clock rate to 24M. This is + required to write OTP bits (7.2.2 in STMP378x Target + Specification), and might affect LCD operation, for example. + Moreover, this hacky code changes VDDIO to 2.8V; and resto- + res it only on otp_close(). This may affect... anything. + + You are warned now. + */ + otp_hclk_saved = clk_get_rate(hclk); + clk_set_rate(hclk, 24000); + /* Set the voltage to 2.8V */ + otp_voltage_saved = __raw_readl(REGS_POWER_BASE + HW_POWER_VDDIOCTRL); + __raw_writel( + (otp_voltage_saved & ~BM_POWER_VDDIOCTRL_TRG) | 0x00, REGS_POWER_BASE + HW_POWER_VDDIOCTRL); + + r = otp_wait_busy(BM_OCOTP_CTRL_RD_BANK_OPEN); + if (r < 0) { + __raw_writel(otp_voltage_saved, REGS_POWER_BASE + HW_POWER_VDDIOCTRL); + clk_set_rate(hclk, otp_hclk_saved); + clk_put(hclk); + err = -ETIMEDOUT; + goto out; + } + + clk_put(hclk); + } + + else { + pr_debug("%s: unknown mode '%d'\n", __func__, mode); + err = -EINVAL; + goto out; + } + + otp_mode = mode; + return 0; +out: + mutex_unlock(&otp_mutex); + pr_debug("%s: status %d\n", __func__, err); + return err; +} + +/** + * otp_close - close the OTP bits after opening by otp_open + **/ +static void otp_close(void) +{ + struct clk *hclk; + + if (!mutex_is_locked(&otp_mutex)) { + printk(KERN_ERR"%s: wasn't opened\n", __func__); + return; + } + + if (otp_mode == O_RDONLY) { + /* 5. clear RD_BANK_OPEN */ + __raw_writel(BM_OCOTP_CTRL_RD_BANK_OPEN, REGS_OCOTP_BASE + HW_OCOTP_CTRL_CLR); + } + + else if (otp_mode == O_WRONLY) { + hclk = clk_get(NULL, "hclk"); + clk_set_rate(hclk, otp_hclk_saved); + __raw_writel(otp_voltage_saved, REGS_POWER_BASE + HW_POWER_VDDIOCTRL); + otp_wait_busy(0); + __raw_writel(BM_OCOTP_CTRL_RELOAD_SHADOWS, REGS_OCOTP_BASE + HW_OCOTP_CTRL_SET); + otp_wait_busy(BM_OCOTP_CTRL_RELOAD_SHADOWS); + } + + else { + return; /* -EINVAL. Who does really check close? */ + } + + otp_mode = 0; + mutex_unlock(&otp_mutex); +} + +/** + * otp_read_bits - read the content of OTP + * + * @start: offset from 0, in u32's + * @len: number of OTP u32's to read + * @bits: caller-allocated buffer to save bits + * @size: size of @bits + * + * Returns number of u32's saved to buffer + **/ +static size_t otp_read_bits(int start, int len, u32 *bits, size_t size) +{ + int ofs; + + BUG_ON(!mutex_is_locked(&otp_mutex)); + + /* read all stuff that caller needs */ + if (start + len > 4 * 8) /* 4 banks, 8 registers each */ + len = 4 * 8 - start; + + for (ofs = start; ofs < len; ofs++) { + if (size/sizeof(*bits) <= 0) /* we drained out the buffer */ + break; + *bits = __raw_readl(REGS_OCOTP_BASE + HW_OCOTP_CUSTn(ofs)); + bits++; + size -= sizeof(*bits); + } + + return ofs - start; /* number of u32's that we saved to buffer */ +} + +/** + * otp_write_bits - store OTP bits + * + * @offset: offset from 0, in u32's + * @data: the u32 to write + * @magic: the magic value to be stored in UNLOCK field + * + **/ +static int otp_write_bits(int offset, u32 data, u32 magic) +{ + u32 c; + int r; + + BUG_ON(!mutex_is_locked(&otp_mutex)); + + if (offset < 0 || offset > 0x1F) + return -EINVAL; + + c = __raw_readl(REGS_OCOTP_BASE + HW_OCOTP_CTRL); + c &= ~BM_OCOTP_CTRL_ADDR; + c |= BF(offset, OCOTP_CTRL_ADDR); + c |= BF(magic, OCOTP_CTRL_WR_UNLOCK); + __raw_writel(c, REGS_OCOTP_BASE + HW_OCOTP_CTRL); + + __raw_writel(data, REGS_OCOTP_BASE + HW_OCOTP_DATA); + + r = otp_wait_busy(0); + if (r < 0) + return r; + + udelay(2); + return 0; +} + +static ssize_t otp_id_show(void *context, char *page, int ascii) +{ + char s[60]; + int ret; + int n, i, j, r; + u32 otp_bits[4 * 8]; + + r = otp_open(O_RDONLY); + if (r < 0) + return 0; + n = otp_read_bits(0, 4 * 8, otp_bits, sizeof(otp_bits)); + otp_close(); + + ret = 0; + + + if (ascii) { + + strcpy(page, ""); + ret = 0; + + if (otp_full) { + for (i = 0; i < 4; i++) { + + ret += sprintf(s, "Bank %d: ", i); + strcat(page, s); + + for (j = 0; j < 8; j++) { + + if (i * 4 + j > n) + break; + ret += sprintf(s, "%08X ", + otp_bits[i * 4 + j]); + strcat(page, s); + } + + strcat(page, "\n"); + ret++; + } + } else { + for (i = 0; i < OTP_USER_SIZE; i++) { + ret += sprintf(s, "%08X ", + otp_bits[i + OTP_USER_OFFSET]); + strcat(page, s); + } + strcat(page, "\n"); + ret++; + } + } else { + + if (otp_full) { + memcpy(page, otp_bits, sizeof(otp_bits)); + ret = sizeof(otp_bits); + } else { + memcpy(page, otp_bits + OTP_USER_OFFSET, + OTP_USER_SIZE * sizeof(u32)); + ret = OTP_USER_SIZE * sizeof(u32); + } + } + + return ret; +} + +static int otp_check_dry_run(const char *page, size_t count) +{ + if (count >= 3 && memcmp(page, "+++", 3) == 0) + return 3; + return 0; +} + +static ssize_t otp_id_store(void *context, const char *page, + size_t count, int ascii) +{ + int r = 0; + const char *p, *cp, *d; + unsigned long index, value; + char tmps[20]; /* subject of strtoul */ + int dry_run; + + r = otp_open(O_WRONLY); + if (r < 0) { + printk(KERN_ERR"Cannot open OTP in WRITE mode\n"); + return r; + } + + if (ascii) { + + dry_run = otp_check_dry_run(page, count); + if (dry_run > 0) + page += dry_run; + + index = 0; + cp = page; + + memset(tmps, 0, sizeof(tmps)); + + for (index = 0, cp = page; cp != NULL; index++) { + p = strchr(cp, ','); + + d = strchr(cp, ':'); + if (d && (!p || d < p)) { + strncpy(tmps, cp, + min_t(int, d - cp, sizeof(tmps) - 1)); + r = strict_strtoul(tmps, 0, &index); + if (r < 0) { + pr_debug("Cannot parse '%s'\n", tmps); + break; + } + cp = d + 1; + } + + memset(tmps, 0, sizeof(tmps)); + + if (!p) + strncpy(tmps, cp, sizeof(tmps)); + else + strncpy(tmps, cp, + min_t(int, p - cp, sizeof(tmps) - 1)); + r = strict_strtoul(tmps, 0, &value); + if (r < 0) { + pr_debug("Cannot parse '%s'\n", tmps); + break; + } + + memset(tmps, 0, sizeof(tmps)); + + cp = p ? ++p : NULL; + + if (!otp_full) { + index += OTP_USER_OFFSET; + if (index > OTP_USER_SIZE) { + printk(KERN_ERR"Cannot write at " + "offset %ld\n", index); + continue; + } + } + + r = 0; + if (!dry_run) { + pr_debug("Index %ld, value 0x%08lx\n", + index, value); + r = otp_write_bits(index, value, 0x3e77); + } else + printk(KERN_NOTICE + "Dry-run: writing 0x%08lX => [%ld]\n", + value, index); + if (r < 0) + break; + } + } else { + printk(KERN_ERR"Binary write is not supported\n"); + r = -ENOSYS; + } + otp_close(); + return (r >= 0) ? count : r; +} + +static struct uid_ops otp_ops = { + .id_show = otp_id_show, + .id_store = otp_id_store, +}; + +static int __init_or_module otp_init(void) +{ + void *p; + + mutex_init(&otp_mutex); + p = uid_provider_init("otp", &otp_ops, NULL); + if (IS_ERR(p)) + return PTR_ERR(p); + return 0; +} + +static void __exit otp_remove(void) +{ + uid_provider_remove("otp"); +} + +module_param(otp_full, int, 0600); +module_init(otp_init); +module_exit(otp_remove); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("dmitry pervushin <dimka@embeddedalley.com>"); +MODULE_DESCRIPTION("Unique ID: OTP"); diff --git a/arch/arm/mach-mx28/include/mach/regs-ocotp.h b/arch/arm/mach-mx28/include/mach/regs-ocotp.h new file mode 100644 index 000000000000..7907250116ec --- /dev/null +++ b/arch/arm/mach-mx28/include/mach/regs-ocotp.h @@ -0,0 +1,239 @@ +/* + * Freescale OCOTP Register Definitions + * + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This file is created by xml file. Don't Edit it. + * + * Xml Revision: 1.21 + * Template revision: 26195 + */ + +#ifndef __ARCH_ARM___OCOTP_H +#define __ARCH_ARM___OCOTP_H + + +#define HW_OCOTP_CTRL (0x00000000) +#define HW_OCOTP_CTRL_SET (0x00000004) +#define HW_OCOTP_CTRL_CLR (0x00000008) +#define HW_OCOTP_CTRL_TOG (0x0000000c) + +#define BP_OCOTP_CTRL_WR_UNLOCK 16 +#define BM_OCOTP_CTRL_WR_UNLOCK 0xFFFF0000 +#define BF_OCOTP_CTRL_WR_UNLOCK(v) \ + (((v) << 16) & BM_OCOTP_CTRL_WR_UNLOCK) +#define BV_OCOTP_CTRL_WR_UNLOCK__KEY 0x3E77 +#define BP_OCOTP_CTRL_RSRVD2 14 +#define BM_OCOTP_CTRL_RSRVD2 0x0000C000 +#define BF_OCOTP_CTRL_RSRVD2(v) \ + (((v) << 14) & BM_OCOTP_CTRL_RSRVD2) +#define BM_OCOTP_CTRL_RELOAD_SHADOWS 0x00002000 +#define BM_OCOTP_CTRL_RD_BANK_OPEN 0x00001000 +#define BP_OCOTP_CTRL_RSRVD1 10 +#define BM_OCOTP_CTRL_RSRVD1 0x00000C00 +#define BF_OCOTP_CTRL_RSRVD1(v) \ + (((v) << 10) & BM_OCOTP_CTRL_RSRVD1) +#define BM_OCOTP_CTRL_ERROR 0x00000200 +#define BM_OCOTP_CTRL_BUSY 0x00000100 +#define BP_OCOTP_CTRL_RSRVD0 6 +#define BM_OCOTP_CTRL_RSRVD0 0x000000C0 +#define BF_OCOTP_CTRL_RSRVD0(v) \ + (((v) << 6) & BM_OCOTP_CTRL_RSRVD0) +#define BP_OCOTP_CTRL_ADDR 0 +#define BM_OCOTP_CTRL_ADDR 0x0000003F +#define BF_OCOTP_CTRL_ADDR(v) \ + (((v) << 0) & BM_OCOTP_CTRL_ADDR) + +#define HW_OCOTP_DATA (0x00000010) + +#define BP_OCOTP_DATA_DATA 0 +#define BM_OCOTP_DATA_DATA 0xFFFFFFFF +#define BF_OCOTP_DATA_DATA(v) (v) + +/* + * multi-register-define name HW_OCOTP_CUSTn + * base 0x00000020 + * count 4 + * offset 0x10 + */ +#define HW_OCOTP_CUSTn(n) (0x00000020 + (n) * 0x10) +#define BP_OCOTP_CUSTn_BITS 0 +#define BM_OCOTP_CUSTn_BITS 0xFFFFFFFF +#define BF_OCOTP_CUSTn_BITS(v) (v) + +/* + * multi-register-define name HW_OCOTP_CRYPTOn + * base 0x00000060 + * count 4 + * offset 0x10 + */ +#define HW_OCOTP_CRYPTOn(n) (0x00000060 + (n) * 0x10) +#define BP_OCOTP_CRYPTOn_BITS 0 +#define BM_OCOTP_CRYPTOn_BITS 0xFFFFFFFF +#define BF_OCOTP_CRYPTOn_BITS(v) (v) + +/* + * multi-register-define name HW_OCOTP_HWCAPn + * base 0x000000A0 + * count 6 + * offset 0x10 + */ +#define HW_OCOTP_HWCAPn(n) (0x000000a0 + (n) * 0x10) +#define BP_OCOTP_HWCAPn_BITS 0 +#define BM_OCOTP_HWCAPn_BITS 0xFFFFFFFF +#define BF_OCOTP_HWCAPn_BITS(v) (v) + +#define HW_OCOTP_SWCAP (0x00000100) + +#define BP_OCOTP_SWCAP_BITS 0 +#define BM_OCOTP_SWCAP_BITS 0xFFFFFFFF +#define BF_OCOTP_SWCAP_BITS(v) (v) + +#define HW_OCOTP_CUSTCAP (0x00000110) + +#define BP_OCOTP_CUSTCAP_RSRVD1 3 +#define BM_OCOTP_CUSTCAP_RSRVD1 0xFFFFFFF8 +#define BF_OCOTP_CUSTCAP_RSRVD1(v) \ + (((v) << 3) & BM_OCOTP_CUSTCAP_RSRVD1) +#define BM_OCOTP_CUSTCAP_RTC_XTAL_32768_PRESENT 0x00000004 +#define BM_OCOTP_CUSTCAP_RTC_XTAL_32000_PRESENT 0x00000002 +#define BM_OCOTP_CUSTCAP_RSRVD0 0x00000001 + +#define HW_OCOTP_LOCK (0x00000120) + +#define BM_OCOTP_LOCK_ROM7 0x80000000 +#define BM_OCOTP_LOCK_ROM6 0x40000000 +#define BM_OCOTP_LOCK_ROM5 0x20000000 +#define BM_OCOTP_LOCK_ROM4 0x10000000 +#define BM_OCOTP_LOCK_ROM3 0x08000000 +#define BM_OCOTP_LOCK_ROM2 0x04000000 +#define BM_OCOTP_LOCK_ROM1 0x02000000 +#define BM_OCOTP_LOCK_ROM0 0x01000000 +#define BM_OCOTP_LOCK_HWSW_SHADOW_ALT 0x00800000 +#define BM_OCOTP_LOCK_CRYPTODCP_ALT 0x00400000 +#define BM_OCOTP_LOCK_CRYPTOKEY_ALT 0x00200000 +#define BM_OCOTP_LOCK_PIN 0x00100000 +#define BM_OCOTP_LOCK_OPS 0x00080000 +#define BM_OCOTP_LOCK_UN2 0x00040000 +#define BM_OCOTP_LOCK_UN1 0x00020000 +#define BM_OCOTP_LOCK_UN0 0x00010000 +#define BM_OCOTP_LOCK_SRK 0x00008000 +#define BP_OCOTP_LOCK_UNALLOCATED 12 +#define BM_OCOTP_LOCK_UNALLOCATED 0x00007000 +#define BF_OCOTP_LOCK_UNALLOCATED(v) \ + (((v) << 12) & BM_OCOTP_LOCK_UNALLOCATED) +#define BM_OCOTP_LOCK_SRK_SHADOW 0x00000800 +#define BM_OCOTP_LOCK_ROM_SHADOW 0x00000400 +#define BM_OCOTP_LOCK_CUSTCAP 0x00000200 +#define BM_OCOTP_LOCK_HWSW 0x00000100 +#define BM_OCOTP_LOCK_CUSTCAP_SHADOW 0x00000080 +#define BM_OCOTP_LOCK_HWSW_SHADOW 0x00000040 +#define BM_OCOTP_LOCK_CRYPTODCP 0x00000020 +#define BM_OCOTP_LOCK_CRYPTOKEY 0x00000010 +#define BM_OCOTP_LOCK_CUST3 0x00000008 +#define BM_OCOTP_LOCK_CUST2 0x00000004 +#define BM_OCOTP_LOCK_CUST1 0x00000002 +#define BM_OCOTP_LOCK_CUST0 0x00000001 + +/* + * multi-register-define name HW_OCOTP_OPSn + * base 0x00000130 + * count 4 + * offset 0x10 + */ +#define HW_OCOTP_OPSn(n) (0x00000130 + (n) * 0x10) +#define BP_OCOTP_OPSn_BITS 0 +#define BM_OCOTP_OPSn_BITS 0xFFFFFFFF +#define BF_OCOTP_OPSn_BITS(v) (v) + +/* + * multi-register-define name HW_OCOTP_UNn + * base 0x00000170 + * count 3 + * offset 0x10 + */ +#define HW_OCOTP_UNn(n) (0x00000170 + (n) * 0x10) +#define BP_OCOTP_UNn_BITS 0 +#define BM_OCOTP_UNn_BITS 0xFFFFFFFF +#define BF_OCOTP_UNn_BITS(v) (v) + +/* + * multi-register-define name HW_OCOTP_ROMn + * base 0x000001A0 + * count 8 + * offset 0x10 + */ +#define HW_OCOTP_ROMn(n) (0x000001a0 + (n) * 0x10) +#define BP_OCOTP_ROMn_BOOT_MODE 24 +#define BM_OCOTP_ROMn_BOOT_MODE 0xFF000000 +#define BF_OCOTP_ROMn_BOOT_MODE(v) \ + (((v) << 24) & BM_OCOTP_ROMn_BOOT_MODE) +#define BP_OCOTP_ROMn_SD_MMC_MODE 22 +#define BM_OCOTP_ROMn_SD_MMC_MODE 0x00C00000 +#define BF_OCOTP_ROMn_SD_MMC_MODE(v) \ + (((v) << 22) & BM_OCOTP_ROMn_SD_MMC_MODE) +#define BP_OCOTP_ROMn_SD_POWER_GATE_GPIO 20 +#define BM_OCOTP_ROMn_SD_POWER_GATE_GPIO 0x00300000 +#define BF_OCOTP_ROMn_SD_POWER_GATE_GPIO(v) \ + (((v) << 20) & BM_OCOTP_ROMn_SD_POWER_GATE_GPIO) +#define BP_OCOTP_ROMn_SD_POWER_UP_DELAY 14 +#define BM_OCOTP_ROMn_SD_POWER_UP_DELAY 0x000FC000 +#define BF_OCOTP_ROMn_SD_POWER_UP_DELAY(v) \ + (((v) << 14) & BM_OCOTP_ROMn_SD_POWER_UP_DELAY) +#define BP_OCOTP_ROMn_SD_BUS_WIDTH 12 +#define BM_OCOTP_ROMn_SD_BUS_WIDTH 0x00003000 +#define BF_OCOTP_ROMn_SD_BUS_WIDTH(v) \ + (((v) << 12) & BM_OCOTP_ROMn_SD_BUS_WIDTH) +#define BP_OCOTP_ROMn_SSP_SCK_INDEX 8 +#define BM_OCOTP_ROMn_SSP_SCK_INDEX 0x00000F00 +#define BF_OCOTP_ROMn_SSP_SCK_INDEX(v) \ + (((v) << 8) & BM_OCOTP_ROMn_SSP_SCK_INDEX) +#define BM_OCOTP_ROMn_EMMC_USE_DDR 0x00000080 +#define BM_OCOTP_ROMn_DISABLE_SPI_NOR_FAST_READ 0x00000040 +#define BM_OCOTP_ROMn_ENABLE_USB_BOOT_SERIAL_NUM 0x00000020 +#define BM_OCOTP_ROMn_ENABLE_UNENCRYPTED_BOOT 0x00000010 +#define BM_OCOTP_ROMn_SD_MBR_BOOT 0x00000008 +#define BM_OCOTP_ROMn_RSRVD2 0x00000004 +#define BM_OCOTP_ROMn_RSRVD1 0x00000002 +#define BM_OCOTP_ROMn_RSRVD0 0x00000001 + +/* + * multi-register-define name HW_OCOTP_SRKn + * base 0x00000220 + * count 8 + * offset 0x10 + */ +#define HW_OCOTP_SRKn(n) (0x00000220 + (n) * 0x10) +#define BP_OCOTP_SRKn_BITS 0 +#define BM_OCOTP_SRKn_BITS 0xFFFFFFFF +#define BF_OCOTP_SRKn_BITS(v) (v) + +#define HW_OCOTP_VERSION (0x000002a0) + +#define BP_OCOTP_VERSION_MAJOR 24 +#define BM_OCOTP_VERSION_MAJOR 0xFF000000 +#define BF_OCOTP_VERSION_MAJOR(v) \ + (((v) << 24) & BM_OCOTP_VERSION_MAJOR) +#define BP_OCOTP_VERSION_MINOR 16 +#define BM_OCOTP_VERSION_MINOR 0x00FF0000 +#define BF_OCOTP_VERSION_MINOR(v) \ + (((v) << 16) & BM_OCOTP_VERSION_MINOR) +#define BP_OCOTP_VERSION_STEP 0 +#define BM_OCOTP_VERSION_STEP 0x0000FFFF +#define BF_OCOTP_VERSION_STEP(v) \ + (((v) << 0) & BM_OCOTP_VERSION_STEP) +#endif /* __ARCH_ARM___OCOTP_H */ diff --git a/arch/arm/mach-mx5/clock_mx50.c b/arch/arm/mach-mx5/clock_mx50.c new file mode 100644 index 000000000000..a2a3c82fba77 --- /dev/null +++ b/arch/arm/mach-mx5/clock_mx50.c @@ -0,0 +1,3554 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/time.h> +#include <linux/hrtimer.h> +#include <linux/mm.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <asm/io.h> +#include <asm/div64.h> +#include <mach/hardware.h> +#include <mach/common.h> +#include <mach/clock.h> +#include <mach/mxc_dvfs.h> +#include <mach/sdram_autogating.h> + +#include "crm_regs.h" + +static struct clk pll1_main_clk; +static struct clk pll1_sw_clk; +static struct clk pll2_sw_clk; +static struct clk pll3_sw_clk; +static struct clk apbh_dma_clk; +static struct clk apll_clk; +static struct clk pfd0_clk; +static struct clk pfd1_clk; +static struct clk pfd2_clk; +static struct clk pfd3_clk; +static struct clk pfd4_clk; +static struct clk pfd5_clk; +static struct clk pfd6_clk; +static struct clk pfd7_clk; +static struct clk lp_apm_clk; +static struct clk weim_clk[]; +static struct clk ddr_clk; +static struct clk axi_a_clk; +static struct clk axi_b_clk; +static struct clk gpu2d_clk; +static int cpu_curr_wp; +static struct cpu_wp *cpu_wp_tbl; + +static void __iomem *pll1_base; +static void __iomem *pll2_base; +static void __iomem *pll3_base; +static void __iomem *apll_base; + +extern int cpu_wp_nr; +extern int lp_high_freq; +extern int lp_med_freq; +void __iomem *databahn; + +#define DDR_SYNC_MODE 0x30000 +#define SPIN_DELAY 1000000 /* in nanoseconds */ +#define WAIT(exp, timeout) \ +({ \ + struct timespec nstimeofday; \ + struct timespec curtime; \ + int result = 1; \ + getnstimeofday(&nstimeofday); \ + while (!(exp)) { \ + getnstimeofday(&curtime); \ + if ((curtime.tv_nsec - nstimeofday.tv_nsec) > (timeout)) { \ + result = 0; \ + break; \ + } \ + } \ + result; \ +}) + +extern int mxc_jtag_enabled; +extern int uart_at_24; +extern int cpufreq_trig_needed; +extern int low_bus_freq_mode; + +static int cpu_clk_set_wp(int wp); +extern void propagate_rate(struct clk *tclk); +extern struct cpu_wp *(*get_cpu_wp)(int *wp); +extern void (*set_num_cpu_wp)(int num); + +static struct clk esdhc3_clk[]; + +static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post) +{ + u32 min_pre, temp_pre, old_err, err; + + if (div >= 512) { + *pre = 8; + *post = 64; + } else if (div >= 8) { + min_pre = (div - 1) / 64 + 1; + old_err = 8; + for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) { + err = div % temp_pre; + if (err == 0) { + *pre = temp_pre; + break; + } + err = temp_pre - err; + if (err < old_err) { + old_err = err; + *pre = temp_pre; + } + } + *post = (div + *pre - 1) / *pre; + } else if (div < 8) { + *pre = div; + *post = 1; + } +} + +static int _clk_enable(struct clk *clk) +{ + u32 reg; + reg = __raw_readl(clk->enable_reg); + reg |= MXC_CCM_CCGR_CG_MASK << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + + if (clk->flags & AHB_HIGH_SET_POINT) + lp_high_freq++; + else if (clk->flags & AHB_MED_SET_POINT) + lp_med_freq++; + + return 0; +} + +static int _clk_enable_inrun(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(MXC_CCM_CCGR_CG_MASK << clk->enable_shift); + reg |= 1 << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + return 0; +} + +static void _clk_disable(struct clk *clk) +{ + u32 reg; + reg = __raw_readl(clk->enable_reg); + reg &= ~(MXC_CCM_CCGR_CG_MASK << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); + + if (clk->flags & AHB_HIGH_SET_POINT) + lp_high_freq--; + else if (clk->flags & AHB_MED_SET_POINT) + lp_med_freq--; +} + +static void _clk_disable_inwait(struct clk *clk) +{ + u32 reg; + reg = __raw_readl(clk->enable_reg); + reg &= ~(MXC_CCM_CCGR_CG_MASK << clk->enable_shift); + reg |= 1 << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); +} + +static unsigned long _clk_round_rate_div(struct clk *clk, + unsigned long rate, + u32 max_div, + u32 *new_div) +{ + u32 div; + + div = DIV_ROUND_UP(clk->parent->rate, rate); + if (div > max_div) + div = max_div; + else if (div == 0) + div++; + if (new_div != NULL) + *new_div = div; + + return clk->parent->rate / div; +} +/* + * For the 4-to-1 muxed input clock + */ +static inline u32 _get_mux(struct clk *parent, struct clk *m0, + struct clk *m1, struct clk *m2, struct clk *m3) +{ + if (parent == m0) + return 0; + else if (parent == m1) + return 1; + else if (parent == m2) + return 2; + else if (parent == m3) + return 3; + else + BUG(); + + return 0; +} + +/* + * For the 4-to-1 muxed input clock + */ +static inline u32 _get_mux8(struct clk *parent, struct clk *m0, struct clk *m1, + struct clk *m2, struct clk *m3, struct clk *m4, + struct clk *m5, struct clk *m6, struct clk *m7) +{ + if (parent == m0) + return 0; + else if (parent == m1) + return 1; + else if (parent == m2) + return 2; + else if (parent == m3) + return 3; + else if (parent == m4) + return 4; + else if (parent == m5) + return 5; + else if (parent == m6) + return 6; + else if (parent == m7) + return 7; + else + BUG(); + + return 0; +} + +static inline void __iomem *_get_pll_base(struct clk *pll) +{ + if (pll == &pll1_main_clk) + return pll1_base; + else if (pll == &pll2_sw_clk) + return pll2_base; + else if (pll == &pll3_sw_clk) + return pll3_base; + else + BUG(); + + return NULL; +} + +static struct clk ckih_clk = { + .name = "ckih", + .flags = RATE_PROPAGATES, +}; + +static struct clk ckih2_clk = { + .name = "ckih2", + .flags = RATE_PROPAGATES, +}; + +static struct clk osc_clk = { + .name = "osc", + .flags = RATE_PROPAGATES, +}; + +static int apll_enable(struct clk *clk) +{ + __raw_writel(1, apll_base + MXC_ANADIG_MISC_SET); + return 0; +} + +static void apll_disable(struct clk *clk) +{ + __raw_writel(1, apll_base + MXC_ANADIG_MISC_CLR); +} + +static struct clk apll_clk = { + .name = "apll", + .rate = 480000000, + .enable = apll_enable, + .disable = apll_disable, + .flags = RATE_PROPAGATES, +}; + +static void pfd_recalc(struct clk *clk) +{ + u32 frac; + u64 rate; + if (apbh_dma_clk.usecount == 0) + apbh_dma_clk.enable(&apbh_dma_clk); + frac = __raw_readl(apll_base + + (int)clk->enable_reg) >> clk->enable_shift; + frac &= MXC_ANADIG_PFD_FRAC_MASK; + rate = (u64)clk->parent->rate * 18; + do_div(rate, frac); + clk->rate = rate; + if (apbh_dma_clk.usecount == 0) + apbh_dma_clk.disable(&apbh_dma_clk); +} + +static unsigned long pfd_round_rate(struct clk *clk, unsigned long rate) +{ + u32 frac; + u64 tmp; + tmp = (u64)clk->parent->rate * 18; + do_div(tmp, rate); + frac = tmp; + frac = frac < 18 ? 18 : frac; + frac = frac > 35 ? 35 : frac; + do_div(tmp, frac); + return tmp; +} + +static int pfd_set_rate(struct clk *clk, unsigned long rate) +{ + u32 frac; + u64 tmp; + + if (apbh_dma_clk.usecount == 0) + apbh_dma_clk.enable(&apbh_dma_clk); + tmp = (u64)clk->parent->rate * 18; + do_div(tmp, rate); + frac = tmp; + frac = frac < 18 ? 18 : frac; + frac = frac > 35 ? 35 : frac; + /* clear clk frac bits */ + __raw_writel(MXC_ANADIG_PFD_FRAC_MASK << clk->enable_shift, + apll_base + (int)clk->enable_reg + 8); + /* set clk frac bits */ + __raw_writel(frac << clk->enable_shift, + apll_base + (int)clk->enable_reg + 4); + + tmp = (u64)clk->parent->rate * 18; + do_div(tmp, frac); + clk->rate = tmp; + if (apbh_dma_clk.usecount == 0) + apbh_dma_clk.disable(&apbh_dma_clk); + return 0; +} + +static int pfd_enable(struct clk *clk) +{ + int index; + + if (apbh_dma_clk.usecount == 0) + apbh_dma_clk.enable(&apbh_dma_clk); + index = _get_mux8(clk, &pfd0_clk, &pfd1_clk, &pfd2_clk, &pfd3_clk, + &pfd4_clk, &pfd5_clk, &pfd6_clk, &pfd7_clk); + __raw_writel(1 << (index + MXC_ANADIG_PFD_DIS_OFFSET), + apll_base + MXC_ANADIG_PLLCTRL_CLR); + /* clear clk gate bit */ + __raw_writel((1 << (clk->enable_shift + 7)), + apll_base + (int)clk->enable_reg + 8); + + /* check lock bit */ + if (!WAIT(__raw_readl(apll_base + MXC_ANADIG_PLLCTRL) + & MXC_ANADIG_APLL_LOCK, 50000)) { + __raw_writel(MXC_ANADIG_APLL_FORCE_LOCK, + apll_base + MXC_ANADIG_PLLCTRL_CLR); + __raw_writel(MXC_ANADIG_APLL_FORCE_LOCK, + apll_base + MXC_ANADIG_PLLCTRL_SET); + if (!WAIT(__raw_readl(apll_base + MXC_ANADIG_PLLCTRL) + & MXC_ANADIG_APLL_LOCK, SPIN_DELAY)) + panic("pfd_enable failed!\n"); + } + if (apbh_dma_clk.usecount == 0) + apbh_dma_clk.disable(&apbh_dma_clk); + return 0; +} + +static void pfd_disable(struct clk *clk) +{ + int index; + + if (apbh_dma_clk.usecount == 0) + apbh_dma_clk.enable(&apbh_dma_clk); + index = _get_mux8(clk, &pfd0_clk, &pfd1_clk, &pfd2_clk, &pfd3_clk, + &pfd4_clk, &pfd5_clk, &pfd6_clk, &pfd7_clk); + /* set clk gate bit */ + __raw_writel((1 << (clk->enable_shift + 7)), + apll_base + (int)clk->enable_reg + 4); + __raw_writel(1 << (index + MXC_ANADIG_PFD_DIS_OFFSET), + apll_base + MXC_ANADIG_PLLCTRL_SET); + if (apbh_dma_clk.usecount == 0) + apbh_dma_clk.disable(&apbh_dma_clk); +} + +static struct clk pfd0_clk = { + .name = "pfd0", + .parent = &apll_clk, + .enable_reg = (void *)MXC_ANADIG_FRAC0, + .enable_shift = MXC_ANADIG_PFD0_FRAC_OFFSET, + .recalc = pfd_recalc, + .set_rate = pfd_set_rate, + .round_rate = pfd_round_rate, + .enable = pfd_enable, + .disable = pfd_disable, + .flags = RATE_PROPAGATES, +}; + +static struct clk pfd1_clk = { + .name = "pfd1", + .parent = &apll_clk, + .enable_reg = (void *)MXC_ANADIG_FRAC0, + .enable_shift = MXC_ANADIG_PFD1_FRAC_OFFSET, + .recalc = pfd_recalc, + .set_rate = pfd_set_rate, + .round_rate = pfd_round_rate, + .enable = pfd_enable, + .disable = pfd_disable, + .flags = RATE_PROPAGATES, +}; + +static struct clk pfd2_clk = { + .name = "pfd2", + .parent = &apll_clk, + .enable_reg = (void *)MXC_ANADIG_FRAC0, + .enable_shift = MXC_ANADIG_PFD2_FRAC_OFFSET, + .recalc = pfd_recalc, + .set_rate = pfd_set_rate, + .round_rate = pfd_round_rate, + .enable = pfd_enable, + .disable = pfd_disable, + .flags = RATE_PROPAGATES, +}; + +static struct clk pfd3_clk = { + .name = "pfd3", + .parent = &apll_clk, + .enable_reg = (void *)MXC_ANADIG_FRAC0, + .enable_shift = MXC_ANADIG_PFD3_FRAC_OFFSET, + .recalc = pfd_recalc, + .set_rate = pfd_set_rate, + .round_rate = pfd_round_rate, + .enable = pfd_enable, + .disable = pfd_disable, + .flags = RATE_PROPAGATES, +}; + +static struct clk pfd4_clk = { + .name = "pfd4", + .parent = &apll_clk, + .enable_reg = (void *)MXC_ANADIG_FRAC1, + .enable_shift = MXC_ANADIG_PFD4_FRAC_OFFSET, + .recalc = pfd_recalc, + .set_rate = pfd_set_rate, + .round_rate = pfd_round_rate, + .enable = pfd_enable, + .disable = pfd_disable, + .flags = RATE_PROPAGATES, +}; + +static struct clk pfd5_clk = { + .name = "pfd5", + .parent = &apll_clk, + .enable_reg = (void *)MXC_ANADIG_FRAC1, + .enable_shift = MXC_ANADIG_PFD5_FRAC_OFFSET, + .recalc = pfd_recalc, + .set_rate = pfd_set_rate, + .round_rate = pfd_round_rate, + .enable = pfd_enable, + .disable = pfd_disable, + .flags = RATE_PROPAGATES, +}; + +static struct clk pfd6_clk = { + .name = "pfd6", + .parent = &apll_clk, + .enable_reg = (void *)MXC_ANADIG_FRAC1, + .enable_shift = MXC_ANADIG_PFD6_FRAC_OFFSET, + .recalc = pfd_recalc, + .set_rate = pfd_set_rate, + .round_rate = pfd_round_rate, + .enable = pfd_enable, + .disable = pfd_disable, + .flags = RATE_PROPAGATES, +}; + +static struct clk pfd7_clk = { + .name = "pfd7", + .parent = &apll_clk, + .enable_reg = (void *)MXC_ANADIG_FRAC1, + .enable_shift = MXC_ANADIG_PFD7_FRAC_OFFSET, + .recalc = pfd_recalc, + .set_rate = pfd_set_rate, + .round_rate = pfd_round_rate, + .enable = pfd_enable, + .disable = pfd_disable, + .flags = RATE_PROPAGATES, +}; + +static struct clk ckil_clk = { + .name = "ckil", + .flags = RATE_PROPAGATES, +}; + +static void _clk_pll_recalc(struct clk *clk) +{ + long mfi, mfn, mfd, pdf, ref_clk, mfn_abs; + unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl; + void __iomem *pllbase; + s64 temp; + + pllbase = _get_pll_base(clk); + + dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); + pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM; + dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN; + + if (pll_hfsm == 0) { + dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); + dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); + dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); + } else { + dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP); + dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD); + dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN); + } + pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK; + mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET; + mfi = (mfi <= 5) ? 5 : mfi; + mfd = dp_mfd & MXC_PLL_DP_MFD_MASK; + mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK; + /* Sign extend to 32-bits */ + if (mfn >= 0x04000000) { + mfn |= 0xFC000000; + mfn_abs = -mfn; + } + + ref_clk = 2 * clk->parent->rate; + if (dbl != 0) + ref_clk *= 2; + + ref_clk /= (pdf + 1); + temp = (u64) ref_clk * mfn_abs; + do_div(temp, mfd + 1); + if (mfn < 0) + temp = -temp; + temp = (ref_clk * mfi) + temp; + + clk->rate = temp; +} + +static int _clk_pll_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, reg1; + void __iomem *pllbase; + + long mfi, pdf, mfn, mfd = 999999; + s64 temp64; + unsigned long quad_parent_rate; + unsigned long pll_hfsm, dp_ctl; + + pllbase = _get_pll_base(clk); + + quad_parent_rate = 4*clk->parent->rate; + pdf = mfi = -1; + while (++pdf < 16 && mfi < 5) + mfi = rate * (pdf+1) / quad_parent_rate; + if (mfi > 15) + return -1; + pdf--; + + temp64 = rate*(pdf+1) - quad_parent_rate*mfi; + do_div(temp64, quad_parent_rate/1000000); + mfn = (long)temp64; + + dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); + /* use dpdck0_2 */ + __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL); + pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM; + if (pll_hfsm == 0) { + reg = mfi<<4 | pdf; + __raw_writel(reg, pllbase + MXC_PLL_DP_OP); + __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD); + __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN); + } else { + reg = mfi<<4 | pdf; + __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP); + __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD); + __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN); + } + /* If auto restart is disabled, restart the PLL and + * wait for it to lock. + */ + reg = __raw_readl(pllbase + MXC_PLL_DP_CTL); + if (reg & MXC_PLL_DP_CTL_UPEN) { + reg = __raw_readl(pllbase + MXC_PLL_DP_CONFIG); + if (!(reg & MXC_PLL_DP_CONFIG_AREN)) { + reg1 = __raw_readl(pllbase + MXC_PLL_DP_CTL); + reg1 |= MXC_PLL_DP_CTL_RST; + __raw_writel(reg1, pllbase + MXC_PLL_DP_CTL); + } + /* Wait for lock */ + if (!WAIT(__raw_readl(pllbase + MXC_PLL_DP_CTL) + & MXC_PLL_DP_CTL_LRF, SPIN_DELAY)) + panic("pll_set_rate: pll relock failed\n"); + } + clk->rate = rate; + return 0; +} + +static int _clk_pll_enable(struct clk *clk) +{ + u32 reg; + void __iomem *pllbase; + + pllbase = _get_pll_base(clk); + reg = __raw_readl(pllbase + MXC_PLL_DP_CTL); + + if (reg & MXC_PLL_DP_CTL_UPEN) + return 0; + + reg |= MXC_PLL_DP_CTL_UPEN; + __raw_writel(reg, pllbase + MXC_PLL_DP_CTL); + + /* Wait for lock */ + if (!WAIT(__raw_readl(pllbase + MXC_PLL_DP_CTL) & MXC_PLL_DP_CTL_LRF, + SPIN_DELAY)) + panic("pll relock failed\n"); + return 0; +} + +static void _clk_pll_disable(struct clk *clk) +{ + u32 reg; + void __iomem *pllbase; + + pllbase = _get_pll_base(clk); + reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN; + __raw_writel(reg, pllbase + MXC_PLL_DP_CTL); +} + +static struct clk pll1_main_clk = { + .name = "pll1_main_clk", + .parent = &osc_clk, + .recalc = _clk_pll_recalc, + .enable = _clk_pll_enable, + .disable = _clk_pll_disable, + .flags = RATE_PROPAGATES, +}; + +static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + reg = __raw_readl(MXC_CCM_CCSR); + + if (parent == &pll1_main_clk) { + reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL; + __raw_writel(reg, MXC_CCM_CCSR); + /* Set the step_clk parent to be lp_apm, to save power. */ + mux = _get_mux(&lp_apm_clk, &lp_apm_clk, NULL, &pll2_sw_clk, + &pll3_sw_clk); + reg = __raw_readl(MXC_CCM_CCSR); + reg = (reg & ~MXC_CCM_CCSR_STEP_SEL_MASK) | + (mux << MXC_CCM_CCSR_STEP_SEL_OFFSET); + } else { + if (parent == &lp_apm_clk) { + reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL; + reg = __raw_readl(MXC_CCM_CCSR); + mux = _get_mux(parent, &lp_apm_clk, NULL, &pll2_sw_clk, + &pll3_sw_clk); + reg = (reg & ~MXC_CCM_CCSR_STEP_SEL_MASK) | + (mux << MXC_CCM_CCSR_STEP_SEL_OFFSET); + } else { + mux = _get_mux(parent, &lp_apm_clk, NULL, &pll2_sw_clk, + &pll3_sw_clk); + reg = (reg & ~MXC_CCM_CCSR_STEP_SEL_MASK) | + (mux << MXC_CCM_CCSR_STEP_SEL_OFFSET); + __raw_writel(reg, MXC_CCM_CCSR); + reg = __raw_readl(MXC_CCM_CCSR); + reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL; + + } + } + __raw_writel(reg, MXC_CCM_CCSR); + + return 0; +} + +static void _clk_pll1_sw_recalc(struct clk *clk) +{ + u32 reg, div; + div = 1; + reg = __raw_readl(MXC_CCM_CCSR); + + if (clk->parent == &pll2_sw_clk) { + div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >> + MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1; + } else if (clk->parent == &pll3_sw_clk) { + div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >> + MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1; + } + clk->rate = clk->parent->rate / div; +} + +/* pll1 switch clock */ +static struct clk pll1_sw_clk = { + .name = "pll1_sw_clk", + .parent = &pll1_main_clk, + .set_parent = _clk_pll1_sw_set_parent, + .recalc = _clk_pll1_sw_recalc, + .flags = RATE_PROPAGATES, +}; + +static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CCSR); + + if (parent == &pll2_sw_clk) { + reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL; + } else { + reg = (reg & ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL); + reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL; + } + __raw_writel(reg, MXC_CCM_CCSR); + return 0; +} + +/* same as pll2_main_clk. These two clocks should always be the same */ +static struct clk pll2_sw_clk = { + .name = "pll2", + .parent = &osc_clk, + .recalc = _clk_pll_recalc, + .enable = _clk_pll_enable, + .disable = _clk_pll_disable, + .set_rate = _clk_pll_set_rate, + .set_parent = _clk_pll2_sw_set_parent, + .flags = RATE_PROPAGATES, +}; + +/* same as pll3_main_clk. These two clocks should always be the same */ +static struct clk pll3_sw_clk = { + .name = "pll3", + .parent = &osc_clk, + .set_rate = _clk_pll_set_rate, + .recalc = _clk_pll_recalc, + .enable = _clk_pll_enable, + .disable = _clk_pll_disable, + .flags = RATE_PROPAGATES, +}; + +static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + if (parent == &osc_clk) + reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL; + else if (parent == &apll_clk) + reg = __raw_readl(MXC_CCM_CCSR) | MXC_CCM_CCSR_LP_APM_SEL; + else + return -EINVAL; + + __raw_writel(reg, MXC_CCM_CCSR); + + return 0; +} + +static struct clk lp_apm_clk = { + .name = "lp_apm", + .parent = &osc_clk, + .set_parent = _clk_lp_apm_set_parent, + .flags = RATE_PROPAGATES, +}; + +static void _clk_arm_recalc(struct clk *clk) +{ + u32 cacrr, div; + + cacrr = __raw_readl(MXC_CCM_CACRR); + div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1; + clk->rate = clk->parent->rate / div; +} + +static int _clk_cpu_set_rate(struct clk *clk, unsigned long rate) +{ + u32 i; + for (i = 0; i < cpu_wp_nr; i++) { + if (rate == cpu_wp_tbl[i].cpu_rate) + break; + } + if (i >= cpu_wp_nr) + return -EINVAL; + cpu_clk_set_wp(i); + + return 0; +} + +static unsigned long _clk_cpu_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 i; + u32 wp; + + for (i = 0; i < cpu_wp_nr; i++) { + if (rate == cpu_wp_tbl[i].cpu_rate) + break; + } + + if (i > cpu_wp_nr) + wp = 0; + + return cpu_wp_tbl[wp].cpu_rate; +} + + +static struct clk cpu_clk = { + .name = "cpu_clk", + .parent = &pll1_sw_clk, + .recalc = _clk_arm_recalc, + .set_rate = _clk_cpu_set_rate, + .round_rate = _clk_cpu_round_rate, +}; + +/* TODO: Need to sync with GPC to determine if DVFS is in place so that + * the DVFS_PODF divider can be applied in CDCR register. + */ +static void _clk_main_bus_recalc(struct clk *clk) +{ + u32 div = 0; + + if (dvfs_per_divider_active() || low_bus_freq_mode) + div = (__raw_readl(MXC_CCM_CDCR) & 0x3); + clk->rate = clk->parent->rate / (div + 1); +} + +static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk, + &lp_apm_clk); + reg = __raw_readl(MXC_CCM_CBCDR) & ~MX50_CCM_CBCDR_PERIPH_CLK_SEL_MASK; + reg |= (mux << MX50_CCM_CBCDR_PERIPH_CLK_SEL_OFFSET); + __raw_writel(reg, MXC_CCM_CBCDR); + + return 0; +} + +static struct clk main_bus_clk = { + .name = "main_bus_clk", + .parent = &pll2_sw_clk, + .set_parent = _clk_main_bus_set_parent, + .recalc = _clk_main_bus_recalc, + .flags = RATE_PROPAGATES, +}; + +static void _clk_axi_a_recalc(struct clk *clk) +{ + u32 reg, div; + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_AXI_A_PODF_MASK) >> + MXC_CCM_CBCDR_AXI_A_PODF_OFFSET) + 1; + clk->rate = clk->parent->rate / div; +} + +static int _clk_axi_a_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div; + + div = clk->parent->rate / rate; + if (div == 0) + div++; + if (((clk->parent->rate / div) != rate) || (div > 8)) + return -EINVAL; + + reg = __raw_readl(MXC_CCM_CBCDR); + reg &= ~MXC_CCM_CBCDR_AXI_A_PODF_MASK; + reg |= (div - 1) << MXC_CCM_CBCDR_AXI_A_PODF_OFFSET; + __raw_writel(reg, MXC_CCM_CBCDR); + + if (!WAIT(!(__raw_readl(MXC_CCM_CDHIPR) + & MXC_CCM_CDHIPR_AXI_A_PODF_BUSY), SPIN_DELAY)) + panic("pll _clk_axi_a_set_rate failed\n"); + clk->rate = rate; + + return 0; +} + +static unsigned long _clk_axi_a_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 div; + + div = clk->parent->rate / rate; + if (div > 8) + div = 8; + else if (div == 0) + div++; + return clk->parent->rate / div; +} + + +static struct clk axi_a_clk = { + .name = "axi_a_clk", + .parent = &main_bus_clk, + .recalc = _clk_axi_a_recalc, + .set_rate = _clk_axi_a_set_rate, + .round_rate = _clk_axi_a_round_rate, + .flags = RATE_PROPAGATES, +}; + +static void _clk_axi_b_recalc(struct clk *clk) +{ + u32 reg, div; + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_AXI_B_PODF_MASK) >> + MXC_CCM_CBCDR_AXI_B_PODF_OFFSET) + 1; + clk->rate = clk->parent->rate / div; +} + +static int _clk_axi_b_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div; + + div = clk->parent->rate / rate; + if (div == 0) + div++; + if (((clk->parent->rate / div) != rate) || (div > 8)) + return -EINVAL; + + reg = __raw_readl(MXC_CCM_CBCDR); + reg &= ~MXC_CCM_CBCDR_AXI_B_PODF_MASK; + reg |= (div - 1) << MXC_CCM_CBCDR_AXI_B_PODF_OFFSET; + __raw_writel(reg, MXC_CCM_CBCDR); + + if (!WAIT(!(__raw_readl(MXC_CCM_CDHIPR) + & MXC_CCM_CDHIPR_AXI_B_PODF_BUSY), SPIN_DELAY)) + panic("_clk_axi_b_set_rate failed\n"); + + clk->rate = rate; + + return 0; +} + +static unsigned long _clk_axi_b_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 div; + + div = clk->parent->rate / rate; + if (div > 8) + div = 8; + else if (div == 0) + div++; + return clk->parent->rate / div; +} + + +static struct clk axi_b_clk = { + .name = "axi_b_clk", + .parent = &main_bus_clk, + .recalc = _clk_axi_b_recalc, + .set_rate = _clk_axi_b_set_rate, + .round_rate = _clk_axi_b_round_rate, + .flags = RATE_PROPAGATES, +}; + +static void _clk_ahb_recalc(struct clk *clk) +{ + u32 reg, div; + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >> + MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1; + clk->rate = clk->parent->rate / div; +} + + +static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div; + + div = clk->parent->rate / rate; + if (div == 0) + div++; + if (((clk->parent->rate / div) != rate) || (div > 8)) + return -EINVAL; + + reg = __raw_readl(MXC_CCM_CBCDR); + reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK; + reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET; + __raw_writel(reg, MXC_CCM_CBCDR); + + if (!WAIT(!(__raw_readl(MXC_CCM_CDHIPR) & MXC_CCM_CDHIPR_AHB_PODF_BUSY), + SPIN_DELAY)) + panic("_clk_ahb_set_rate failed\n"); + clk->rate = rate; + + return 0; +} + +static unsigned long _clk_ahb_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 div; + + div = clk->parent->rate / rate; + if (div > 8) + div = 8; + else if (div == 0) + div++; + return clk->parent->rate / div; +} + + +static struct clk ahb_clk = { + .name = "ahb_clk", + .parent = &main_bus_clk, + .recalc = _clk_ahb_recalc, + .set_rate = _clk_ahb_set_rate, + .round_rate = _clk_ahb_round_rate, + .flags = RATE_PROPAGATES, +}; + +static int _clk_max_enable(struct clk *clk) +{ + u32 reg; + + _clk_enable(clk); + + /* Handshake with MAX when LPM is entered. */ + reg = __raw_readl(MXC_CCM_CLPCR); + reg &= ~MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS; + __raw_writel(reg, MXC_CCM_CLPCR); + + return 0; +} + + +static void _clk_max_disable(struct clk *clk) +{ + u32 reg; + + _clk_disable_inwait(clk); + + /* No Handshake with MAX when LPM is entered as its disabled. */ + reg = __raw_readl(MXC_CCM_CLPCR); + reg |= MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS; + __raw_writel(reg, MXC_CCM_CLPCR); +} + + +static struct clk ahb_max_clk = { + .name = "max_clk", + .parent = &ahb_clk, + .enable_reg = MXC_CCM_CCGR0, + .enable_shift = MXC_CCM_CCGR0_CG14_OFFSET, + .enable = _clk_max_enable, + .disable = _clk_max_disable, +}; + + +static struct clk ahbmux1_clk = { + .name = "ahbmux1_clk", + .id = 0, + .parent = &ahb_clk, + .secondary = &ahb_max_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR0, + .enable_shift = MXC_CCM_CCGR0_CG8_OFFSET, + .disable = _clk_disable_inwait, +}; + +static void _clk_ipg_recalc(struct clk *clk) +{ + u32 reg, div; + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >> + MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1; + clk->rate = clk->parent->rate / div; +} + +static struct clk ipg_clk = { + .name = "ipg_clk", + .parent = &ahb_clk, + .recalc = _clk_ipg_recalc, + .flags = RATE_PROPAGATES, +}; + +static void _clk_ipg_per_recalc(struct clk *clk) +{ + u32 reg, prediv1, prediv2, podf; + + if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) { + /* the main_bus_clk is the one before the DVFS engine */ + reg = __raw_readl(MXC_CCM_CBCDR); + prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >> + MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1; + prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >> + MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1; + podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >> + MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1; + clk->rate = clk->parent->rate / (prediv1 * prediv2 * podf); + } else if (clk->parent == &ipg_clk) { + clk->rate = ipg_clk.rate; + } else { + BUG(); + } +} + +static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + reg = __raw_readl(MXC_CCM_CBCMR); + mux = _get_mux(parent, &main_bus_clk, &lp_apm_clk, &ipg_clk, NULL); + if (mux == 2) { + reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL; + } else { + reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL; + if (mux == 0) + reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL; + else + reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL; + } + __raw_writel(reg, MXC_CCM_CBCMR); + + return 0; +} + +static struct clk ipg_perclk = { + .name = "ipg_perclk", + .parent = &lp_apm_clk, + .recalc = _clk_ipg_per_recalc, + .set_parent = _clk_ipg_per_set_parent, + .flags = RATE_PROPAGATES, +}; + +static struct clk ipmux1_clk = { + .name = "ipmux1", + .enable_reg = MXC_CCM_CCGR5, + .enable_shift = MXC_CCM_CCGR5_CG6_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, +}; + +static struct clk ipmux2_clk = { + .name = "ipmux2", + .enable_reg = MXC_CCM_CCGR6, + .enable_shift = MXC_CCM_CCGR6_CG0_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, +}; + +static int _clk_sys_clk_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CLK_SYS); + reg &= ~(MXC_CCM_CLK_SYS_SYS_XTAL_CLKGATE_MASK | + MXC_CCM_CLK_SYS_SYS_PLL_CLKGATE_MASK); + if (__raw_readl(MXC_CCM_CLKSEQ_BYPASS) & 0x1) + reg |= MXC_CCM_CLK_SYS_SYS_PLL_CLKGATE_MASK; + else + reg |= MXC_CCM_CLK_SYS_SYS_XTAL_CLKGATE_MASK; + __raw_writel(reg, MXC_CCM_CLK_SYS); + return 0; +} + +static void _clk_sys_clk_disable(struct clk *clk) +{ + u32 reg, reg1; + + reg1 = (__raw_readl(databahn + DATABAHN_CTL_REG55)) + & DDR_SYNC_MODE; + reg = __raw_readl(MXC_CCM_CLK_SYS); + reg &= ~(MXC_CCM_CLK_SYS_SYS_XTAL_CLKGATE_MASK | + MXC_CCM_CLK_SYS_SYS_PLL_CLKGATE_MASK); + if (__raw_readl(MXC_CCM_CLKSEQ_BYPASS) & 0x1) + reg |= 1 << MXC_CCM_CLK_SYS_SYS_PLL_CLKGATE_OFFSET; + else { + /* If DDR is sourced from SYS_CLK (in Sync mode), we cannot + * gate its clock when ARM is in wait if the DDR is not in + * self refresh. + */ + if (reg1 == DDR_SYNC_MODE) + reg |= 3 << MXC_CCM_CLK_SYS_SYS_XTAL_CLKGATE_OFFSET; + else + reg |= 1 << MXC_CCM_CLK_SYS_SYS_XTAL_CLKGATE_OFFSET; + } + __raw_writel(reg, MXC_CCM_CLK_SYS); +} + +static struct clk sys_clk = { + .name = "sys_clk", + .enable = _clk_sys_clk_enable, + .disable = _clk_sys_clk_disable, +}; + + +static int _clk_weim_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CBCDR); + if (parent == &ahb_clk) + reg |= MX50_CCM_CBCDR_WEIM_CLK_SEL; + else if (parent == &main_bus_clk) + reg &= ~MX50_CCM_CBCDR_WEIM_CLK_SEL; + else + BUG(); + __raw_writel(reg, MXC_CCM_CBCDR); + + return 0; +} + +static void _clk_weim_recalc(struct clk *clk) +{ + u32 reg, div; + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_EMI_PODF_MASK) >> + MXC_CCM_CBCDR_EMI_PODF_OFFSET) + 1; + clk->rate = clk->parent->rate / div; +} + +static int _clk_weim_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div; + + div = clk->parent->rate / rate; + if (div == 0) + div++; + if (((clk->parent->rate / div) != rate) || (div > 8)) + return -EINVAL; + reg = __raw_readl(MXC_CCM_CBCDR); + reg &= ~MXC_CCM_CBCDR_EMI_PODF_MASK; + reg |= (div - 1) << MXC_CCM_CBCDR_EMI_PODF_OFFSET; + __raw_writel(reg, MXC_CCM_CBCDR); + if (!WAIT(!(__raw_readl(MXC_CCM_CDHIPR) & MXC_CCM_CDHIPR_EMI_PODF_BUSY), + SPIN_DELAY)) + panic("_clk_emi_slow_set_rate failed\n"); + clk->rate = rate; + + return 0; +} + +static unsigned long _clk_weim_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 div; + + div = clk->parent->rate / rate; + if (div > 8) + div = 8; + else if (div == 0) + div++; + return clk->parent->rate / div; +} + +static struct clk weim_clk[] = { + { + .name = "weim_clk", + .parent = &main_bus_clk, + .set_parent = _clk_weim_set_parent, + .recalc = _clk_weim_recalc, + .set_rate = _clk_weim_set_rate, + .round_rate = _clk_weim_round_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR5, + .enable_shift = MXC_CCM_CCGR5_CG8_OFFSET, + .disable = _clk_disable_inwait, + .flags = RATE_PROPAGATES, + .secondary = &weim_clk[1], + }, + { + .name = "weim_ipg_clk", + .parent = &ipg_clk, + .secondary = &sys_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR5, + .enable_shift = MXC_CCM_CCGR5_CG9_OFFSET, + .disable = _clk_disable_inwait, + } +}; + +static int _clk_ocram_enable(struct clk *clk) +{ + return 0; +} + +static void _clk_ocram_disable(struct clk *clk) +{ +} + +static struct clk ocram_clk = { + .name = "ocram_clk", + .parent = &sys_clk, + .enable_reg = MXC_CCM_CCGR6, + .enable_shift = MXC_CCM_CCGR6_CG1_OFFSET, + .enable = _clk_ocram_enable, + .disable = _clk_ocram_disable, +}; + +static struct clk aips_tz1_clk = { + .name = "aips_tz1_clk", + .parent = &ahb_clk, + .secondary = &ahb_max_clk, + .enable_reg = MXC_CCM_CCGR0, + .enable_shift = MXC_CCM_CCGR0_CG12_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable_inwait, +}; + +static struct clk aips_tz2_clk = { + .name = "aips_tz2_clk", + .parent = &ahb_clk, + .secondary = &ahb_max_clk, + .enable_reg = MXC_CCM_CCGR0, + .enable_shift = MXC_CCM_CCGR0_CG13_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable_inwait, +}; + +static struct clk gpc_dvfs_clk = { + .name = "gpc_dvfs_clk", + .enable_reg = MXC_CCM_CCGR5, + .enable_shift = MXC_CCM_CCGR5_CG12_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, +}; + +static int _clk_sdma_enable(struct clk *clk) +{ + u32 reg; + + _clk_enable(clk); + + /* Handshake with SDMA when LPM is entered. */ + reg = __raw_readl(MXC_CCM_CLPCR); + reg &= ~MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS; + __raw_writel(reg, MXC_CCM_CLPCR); + + return 0; +} + +static void _clk_sdma_disable(struct clk *clk) +{ + u32 reg; + + _clk_disable(clk); + /* No handshake with SDMA as its not enabled. */ + reg = __raw_readl(MXC_CCM_CLPCR); + reg |= MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS; + __raw_writel(reg, MXC_CCM_CLPCR); +} + + +static struct clk sdma_clk[] = { + { + .name = "sdma_ahb_clk", + .parent = &ahb_clk, + .enable_reg = MXC_CCM_CCGR4, + .enable_shift = MXC_CCM_CCGR4_CG15_OFFSET, + .enable = _clk_sdma_enable, + .disable = _clk_sdma_disable, + }, + { + .name = "sdma_ipg_clk", + .parent = &ipg_clk, + .secondary = &ddr_clk, + }, +}; + +static struct clk spba_clk = { + .name = "spba_clk", + .parent = &ipg_clk, + .enable_reg = MXC_CCM_CCGR5, + .enable_shift = MXC_CCM_CCGR5_CG0_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, +}; + +static void _clk_uart_recalc(struct clk *clk) +{ + u32 reg, prediv, podf; + + reg = __raw_readl(MXC_CCM_CSCDR1); + prediv = ((reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >> + MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET) + 1; + podf = ((reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >> + MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET) + 1; + + clk->rate = clk->parent->rate / (prediv * podf); +} + +static int _clk_uart_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk, + &lp_apm_clk); + reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_UART_CLK_SEL_MASK; + reg |= mux << MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +static struct clk uart_main_clk = { + .name = "uart_main_clk", + .parent = &pll2_sw_clk, + .recalc = _clk_uart_recalc, + .set_parent = _clk_uart_set_parent, + .flags = RATE_PROPAGATES, +}; + +static struct clk uart1_clk[] = { + { + .name = "uart_clk", + .id = 0, + .parent = &uart_main_clk, + .secondary = &uart1_clk[1], + .enable_reg = MXC_CCM_CCGR1, + .enable_shift = MXC_CCM_CCGR1_CG4_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, +#ifdef UART1_DMA_ENABLE + .flags = AHB_HIGH_SET_POINT | CPU_FREQ_TRIG_UPDATE, +#endif + }, + { + .name = "uart_ipg_clk", + .id = 0, + .parent = &ipg_clk, +#ifdef UART1_DMA_ENABLE + .secondary = &aips_tz1_clk, +#endif + .enable_reg = MXC_CCM_CCGR1, + .enable_shift = MXC_CCM_CCGR1_CG3_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + }, +}; + +static struct clk uart2_clk[] = { + { + .name = "uart_clk", + .id = 1, + .parent = &uart_main_clk, + .secondary = &uart2_clk[1], + .enable_reg = MXC_CCM_CCGR1, + .enable_shift = MXC_CCM_CCGR1_CG6_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, +#ifdef UART2_DMA_ENABLE + .flags = AHB_HIGH_SET_POINT | CPU_FREQ_TRIG_UPDATE, +#endif + }, + { + .name = "uart_ipg_clk", + .id = 1, + .parent = &ipg_clk, +#ifdef UART2_DMA_ENABLE + .secondary = &aips_tz1_clk, +#endif + .enable_reg = MXC_CCM_CCGR1, + .enable_shift = MXC_CCM_CCGR1_CG5_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + }, +}; + +static struct clk uart3_clk[] = { + { + .name = "uart_clk", + .id = 2, + .parent = &uart_main_clk, + .secondary = &uart3_clk[1], + .enable_reg = MXC_CCM_CCGR1, + .enable_shift = MXC_CCM_CCGR1_CG8_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, +#ifdef UART3_DMA_ENABLE + .flags = AHB_HIGH_SET_POINT | CPU_FREQ_TRIG_UPDATE, +#endif + }, + { + .name = "uart_ipg_clk", + .id = 2, + .parent = &ipg_clk, + .secondary = &spba_clk, + .enable_reg = MXC_CCM_CCGR1, + .enable_shift = MXC_CCM_CCGR1_CG7_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + }, +}; + +static struct clk uart4_clk[] = { + { + .name = "uart_clk", + .id = 3, + .parent = &uart_main_clk, + .secondary = &uart4_clk[1], + .enable_reg = MXC_CCM_CCGR7, + .enable_shift = MXC_CCM_CCGR7_CG5_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, +#ifdef UART4_DMA_ENABLE + .flags = AHB_HIGH_SET_POINT | CPU_FREQ_TRIG_UPDATE, +#endif + }, + { + .name = "uart_ipg_clk", + .id = 3, + .parent = &ipg_clk, + .secondary = &spba_clk, + .enable_reg = MXC_CCM_CCGR7, + .enable_shift = MXC_CCM_CCGR7_CG4_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + }, +}; + +static struct clk uart5_clk[] = { + { + .name = "uart_clk", + .id = 4, + .parent = &uart_main_clk, + .secondary = &uart5_clk[1], + .enable_reg = MXC_CCM_CCGR7, + .enable_shift = MXC_CCM_CCGR7_CG7_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, +#ifdef UART5_DMA_ENABLE + .flags = AHB_HIGH_SET_POINT | CPU_FREQ_TRIG_UPDATE, +#endif + }, + { + .name = "uart_ipg_clk", + .id = 4, + .parent = &ipg_clk, + .secondary = &spba_clk, + .enable_reg = MXC_CCM_CCGR7, + .enable_shift = MXC_CCM_CCGR7_CG6_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + }, +}; + +static struct clk gpt_clk[] = { + { + .name = "gpt_clk", + .parent = &ipg_perclk, + .id = 0, + .enable_reg = MXC_CCM_CCGR2, + .enable_shift = MXC_CCM_CCGR2_CG10_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + }, + { + .name = "gpt_ipg_clk", + .id = 0, + .parent = &ipg_clk, + .enable_reg = MXC_CCM_CCGR2, + .enable_shift = MXC_CCM_CCGR2_CG9_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + }, + { + .name = "gpt_32k_clk", + .id = 0, + .parent = &ckil_clk, + }, +}; + +static struct clk pwm1_clk[] = { + { + .name = "pwm", + .parent = &ipg_perclk, + .id = 0, + .enable_reg = MXC_CCM_CCGR2, + .enable_shift = MXC_CCM_CCGR2_CG6_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + .secondary = &pwm1_clk[1], + }, + { + .name = "pwm_ipg_clk", + .id = 0, + .parent = &ipg_clk, + .enable_reg = MXC_CCM_CCGR2, + .enable_shift = MXC_CCM_CCGR2_CG5_OFFSET, + .enable = _clk_enable_inrun, /*Active only when ARM is running. */ + .disable = _clk_disable, + }, + { + .name = "pwm_32k_clk", + .id = 0, + .parent = &ckil_clk, + }, +}; + +static struct clk pwm2_clk[] = { + { + .name = "pwm", + .parent = &ipg_perclk, + .id = 1, + .enable_reg = MXC_CCM_CCGR2, + .enable_shift = MXC_CCM_CCGR2_CG8_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + .secondary = &pwm2_clk[1], + }, + { + .name = "pwm_ipg_clk", + .id = 1, + .parent = &ipg_clk, + .enable_reg = MXC_CCM_CCGR2, + .enable_shift = MXC_CCM_CCGR2_CG7_OFFSET, + .enable = _clk_enable_inrun, /*Active only when ARM is running. */ + .disable = _clk_disable, + }, + { + .name = "pwm_32k_clk", + .id = 1, + .parent = &ckil_clk, + }, +}; + +static struct clk i2c_clk[] = { + { + .name = "i2c_clk", + .id = 0, + .parent = &ipg_perclk, + .enable_reg = MXC_CCM_CCGR1, + .enable_shift = MXC_CCM_CCGR1_CG9_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + }, + { + .name = "i2c_clk", + .id = 1, + .parent = &ipg_perclk, + .enable_reg = MXC_CCM_CCGR1, + .enable_shift = MXC_CCM_CCGR1_CG10_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + }, + { + .name = "i2c_clk", + .id = 2, + .parent = &ipg_perclk, + .enable_reg = MXC_CCM_CCGR1, + .enable_shift = MXC_CCM_CCGR1_CG11_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + }, +}; + +static void _clk_cspi_recalc(struct clk *clk) +{ + u32 reg, prediv, podf; + + reg = __raw_readl(MXC_CCM_CSCDR2); + prediv = ((reg & MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK) >> + MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET) + 1; + if (prediv == 1) + BUG(); + podf = ((reg & MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK) >> + MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET) + 1; + + clk->rate = clk->parent->rate / (prediv * podf); +} + +static int _clk_cspi_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk, + &lp_apm_clk); + reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK; + reg |= mux << MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +static struct clk cspi_main_clk = { + .name = "cspi_main_clk", + .parent = &pll3_sw_clk, + .recalc = _clk_cspi_recalc, + .set_parent = _clk_cspi_set_parent, + .flags = RATE_PROPAGATES, +}; + +static struct clk cspi1_clk[] = { + { + .name = "cspi_clk", + .id = 0, + .parent = &cspi_main_clk, + .secondary = &cspi1_clk[1], + .enable_reg = MXC_CCM_CCGR4, + .enable_shift = MXC_CCM_CCGR4_CG10_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + }, + { + .name = "cspi_ipg_clk", + .id = 0, + .parent = &ipg_clk, + .secondary = &spba_clk, + .enable_reg = MXC_CCM_CCGR4, + .enable_shift = MXC_CCM_CCGR4_CG9_OFFSET, + .enable = _clk_enable_inrun, /*Active only when ARM is running. */ + .disable = _clk_disable, + }, +}; + +static struct clk cspi2_clk[] = { + { + .name = "cspi_clk", + .id = 1, + .parent = &cspi_main_clk, + .secondary = &cspi2_clk[1], + .enable_reg = MXC_CCM_CCGR4, + .enable_shift = MXC_CCM_CCGR4_CG12_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + }, + { + .name = "cspi_ipg_clk", + .id = 1, + .parent = &ipg_clk, + .secondary = &aips_tz2_clk, + .enable_reg = MXC_CCM_CCGR4, + .enable_shift = MXC_CCM_CCGR4_CG11_OFFSET, + .enable = _clk_enable_inrun, /*Active only when ARM is running. */ + .disable = _clk_disable, + }, +}; + +static struct clk cspi3_clk = { + .name = "cspi_clk", + .id = 2, + .parent = &ipg_clk, + .enable_reg = MXC_CCM_CCGR4, + .enable_shift = MXC_CCM_CCGR4_CG13_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + .secondary = &aips_tz2_clk, +}; + +static int _clk_ssi_lp_apm_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + mux = _get_mux(parent, &ckih_clk, &lp_apm_clk, &ckih2_clk, NULL); + reg = __raw_readl(MXC_CCM_CSCMR1) & + ~MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK; + reg |= mux << MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +static struct clk ssi_lp_apm_clk = { + .name = "ssi_lp_apm_clk", + .parent = &ckih_clk, + .set_parent = _clk_ssi_lp_apm_set_parent, +}; + +static void _clk_ssi1_recalc(struct clk *clk) +{ + u32 reg, prediv, podf; + + reg = __raw_readl(MXC_CCM_CS1CDR); + prediv = ((reg & MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK) >> + MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET) + 1; + if (prediv == 1) + BUG(); + podf = ((reg & MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK) >> + MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET) + 1; + + clk->rate = clk->parent->rate / (prediv * podf); +} +static int _clk_ssi1_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, + &pll3_sw_clk, &ssi_lp_apm_clk); + reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK; + reg |= mux << MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +static struct clk ssi1_clk[] = { + { + .name = "ssi_clk", + .id = 0, + .parent = &pll3_sw_clk, + .set_parent = _clk_ssi1_set_parent, + .secondary = &ssi1_clk[1], + .recalc = _clk_ssi1_recalc, + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGR3_CG9_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + }, + { + .name = "ssi_ipg_clk", + .id = 0, + .parent = &ipg_clk, + .secondary = &ssi1_clk[2], + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGR3_CG8_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + }, + { + .name = "ssi_dep_clk", + .id = 0, + .parent = &aips_tz2_clk, + }, +}; + +static void _clk_ssi2_recalc(struct clk *clk) +{ + u32 reg, prediv, podf; + + reg = __raw_readl(MXC_CCM_CS2CDR); + prediv = ((reg & MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK) >> + MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET) + 1; + if (prediv == 1) + BUG(); + podf = ((reg & MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK) >> + MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET) + 1; + + clk->rate = clk->parent->rate / (prediv * podf); +} + +static int _clk_ssi2_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, + &pll3_sw_clk, &ssi_lp_apm_clk); + reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK; + reg |= mux << MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +static struct clk ssi2_clk[] = { + { + .name = "ssi_clk", + .id = 1, + .parent = &pll3_sw_clk, + .set_parent = _clk_ssi2_set_parent, + .secondary = &ssi2_clk[1], + .recalc = _clk_ssi2_recalc, + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGR3_CG11_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + }, + { + .name = "ssi_ipg_clk", + .id = 1, + .parent = &ipg_clk, + .secondary = &ssi2_clk[2], + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGR3_CG10_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, + }, + { + .name = "ssi_dep_clk", + .id = 1, + .parent = &spba_clk, + }, +}; + +static void _clk_ssi_ext1_recalc(struct clk *clk) +{ + u32 reg, prediv, podf; + + clk->rate = clk->parent->rate; + reg = __raw_readl(MXC_CCM_CSCMR1); + if ((reg & MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL) == 0) { + reg = __raw_readl(MXC_CCM_CS1CDR); + prediv = ((reg & MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK) >> + MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET) + 1; + if (prediv == 1) + BUG(); + podf = ((reg & MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK) >> + MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET) + 1; + clk->rate = clk->parent->rate / (prediv * podf); + } +} + +static int _clk_ssi_ext1_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div, pre, post; + + div = clk->parent->rate / rate; + if (div == 0) + div++; + if (((clk->parent->rate / div) != rate) || div > 512) + return -EINVAL; + + __calc_pre_post_dividers(div, &pre, &post); + + reg = __raw_readl(MXC_CCM_CS1CDR); + reg &= ~(MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK | + MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK); + reg |= (post - 1) << MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET; + reg |= (pre - 1) << MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET; + __raw_writel(reg, MXC_CCM_CS1CDR); + + clk->rate = rate; + + return 0; +} + +static int _clk_ssi_ext1_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + reg = __raw_readl(MXC_CCM_CSCMR1); + if (parent == &ssi1_clk[0]) { + reg |= MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL; + } else { + reg &= ~MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL; + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk, + &ssi_lp_apm_clk); + reg = (reg & ~MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK) | + (mux << MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET); + } + + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +static unsigned long _clk_ssi_ext1_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 pre, post; + u32 div = clk->parent->rate / rate; + + if (clk->parent->rate % rate) + div++; + + __calc_pre_post_dividers(div, &pre, &post); + + return clk->parent->rate / (pre * post); +} + +static struct clk ssi_ext1_clk = { + .name = "ssi_ext1_clk", + .parent = &pll3_sw_clk, + .set_parent = _clk_ssi_ext1_set_parent, + .set_rate = _clk_ssi_ext1_set_rate, + .round_rate = _clk_ssi_ext1_round_rate, + .recalc = _clk_ssi_ext1_recalc, + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGR3_CG14_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, +}; + +static void _clk_ssi_ext2_recalc(struct clk *clk) +{ + u32 reg, prediv, podf; + + clk->rate = clk->parent->rate; + reg = __raw_readl(MXC_CCM_CSCMR1); + if ((reg & MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL) == 0) { + reg = __raw_readl(MXC_CCM_CS2CDR); + prediv = ((reg & MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK) >> + MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET) + 1; + if (prediv == 1) + BUG(); + podf = ((reg & MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK) >> + MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET) + 1; + clk->rate = clk->parent->rate / (prediv * podf); + } +} + +static int _clk_ssi_ext2_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + reg = __raw_readl(MXC_CCM_CSCMR1); + if (parent == &ssi2_clk[0]) { + reg |= MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL; + } else { + reg &= ~MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL; + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk, + &ssi_lp_apm_clk); + reg = (reg & ~MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK) | + (mux << MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET); + } + + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +static struct clk ssi_ext2_clk = { + .name = "ssi_ext2_clk", + .parent = &pll3_sw_clk, + .set_parent = _clk_ssi_ext2_set_parent, + .recalc = _clk_ssi_ext2_recalc, + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGR3_CG15_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, +}; + +static struct clk tmax2_clk = { + .name = "tmax2_clk", + .id = 0, + .parent = &ahb_clk, + .secondary = &ahb_max_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR1, + .enable_shift = MXC_CCM_CCGR1_CG1_OFFSET, + .disable = _clk_disable, +}; + +static struct clk usb_ahb_clk = { + .name = "usb_ahb_clk", + .parent = &ipg_clk, + .secondary = &ddr_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR2, + .enable_shift = MXC_CCM_CCGR2_CG13_OFFSET, + .disable = _clk_disable, + .flags = AHB_MED_SET_POINT | CPU_FREQ_TRIG_UPDATE, +}; + +static struct clk usb_phy_clk[] = { + { + .name = "usb_phy1_clk", + .id = 0, + .parent = &osc_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR4, + .enable_shift = MXC_CCM_CCGR4_CG5_OFFSET, + .disable = _clk_disable, + }, + { + .name = "usb_phy2_clk", + .id = 1, + .parent = &osc_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR4, + .enable_shift = MXC_CCM_CCGR4_CG6_OFFSET, + .disable = _clk_disable, + } +}; + +static struct clk esdhc_dep_clks = { + .name = "sd_dep_clk", + .parent = &spba_clk, + .secondary = &ddr_clk, +}; + +static void _clk_esdhc1_recalc(struct clk *clk) +{ + u32 reg, prediv, podf; + + reg = __raw_readl(MXC_CCM_CSCDR1); + prediv = ((reg & MXC_CCM_CSCDR1_ESDHC1_MSHC2_CLK_PRED_MASK) >> + MXC_CCM_CSCDR1_ESDHC1_MSHC2_CLK_PRED_OFFSET) + 1; + podf = ((reg & MXC_CCM_CSCDR1_ESDHC1_MSHC2_CLK_PODF_MASK) >> + MXC_CCM_CSCDR1_ESDHC1_MSHC2_CLK_PODF_OFFSET) + 1; + + clk->rate = clk->parent->rate / (prediv * podf); +} + +static int _clk_esdhc1_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + reg = __raw_readl(MXC_CCM_CSCMR1); + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk, + &lp_apm_clk); + reg = reg & ~MX50_CCM_CSCMR1_ESDHC1_CLK_SEL_MASK; + reg |= mux << MX50_CCM_CSCMR1_ESDHC1_CLK_SEL_OFFSET; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + + +static int _clk_esdhc1_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + u32 div; + u32 pre, post; + + div = clk->parent->rate / rate; + + if ((clk->parent->rate / div) != rate) + return -EINVAL; + + __calc_pre_post_dividers(div, &pre, &post); + + /* Set sdhc1 clock divider */ + reg = __raw_readl(MXC_CCM_CSCDR1) & + ~(MXC_CCM_CSCDR1_ESDHC1_MSHC2_CLK_PRED_MASK | + MXC_CCM_CSCDR1_ESDHC1_MSHC2_CLK_PODF_MASK); + reg |= (post - 1) << MXC_CCM_CSCDR1_ESDHC1_MSHC2_CLK_PODF_OFFSET; + reg |= (pre - 1) << MXC_CCM_CSCDR1_ESDHC1_MSHC2_CLK_PRED_OFFSET; + __raw_writel(reg, MXC_CCM_CSCDR1); + + clk->rate = rate; + return 0; +} + +static struct clk esdhc1_clk[] = { + { + .name = "esdhc_clk", + .id = 0, + .parent = &pll2_sw_clk, + .set_parent = _clk_esdhc1_set_parent, + .recalc = _clk_esdhc1_recalc, + .set_rate = _clk_esdhc1_set_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGR3_CG1_OFFSET, + .disable = _clk_disable, + .secondary = &esdhc1_clk[1], + .flags = AHB_HIGH_SET_POINT | CPU_FREQ_TRIG_UPDATE, + }, + { + .name = "esdhc_ipg_clk", + .id = 0, + .parent = &ipg_clk, + .secondary = &esdhc1_clk[2], + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGR3_CG0_OFFSET, + .disable = _clk_disable, + }, + { + .name = "esdhc_sec_clk", + .id = 0, + .parent = &tmax2_clk, + .secondary = &esdhc_dep_clks, + }, + +}; + +static int _clk_esdhc2_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CSCMR1); + if (parent == &esdhc1_clk[0]) + reg &= ~MX50_CCM_CSCMR1_ESDHC2_CLK_SEL; + else if (parent == &esdhc3_clk[0]) + reg |= MX50_CCM_CSCMR1_ESDHC2_CLK_SEL; + else + BUG(); + __raw_writel(reg, MXC_CCM_CSCMR1); + return 0; +} + +static struct clk esdhc2_clk[] = { + { + .name = "esdhc_clk", + .id = 1, + .parent = &esdhc1_clk[0], + .set_parent = _clk_esdhc2_set_parent, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGR3_CG3_OFFSET, + .disable = _clk_disable, + .secondary = &esdhc2_clk[1], + .flags = AHB_HIGH_SET_POINT | CPU_FREQ_TRIG_UPDATE, + }, + { + .name = "esdhc_ipg_clk", + .id = 1, + .parent = &ipg_clk, + .secondary = &esdhc2_clk[2], + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGR3_CG2_OFFSET, + .disable = _clk_disable, + }, + { + .name = "esdhc_sec_clk", + .id = 0, + .parent = &tmax2_clk, + .secondary = &esdhc_dep_clks, + }, +}; + +static int _clk_esdhc3_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + reg = __raw_readl(MXC_CCM_CSCMR1); + mux = _get_mux8(parent, &pll1_sw_clk, &pll2_sw_clk, + &pll3_sw_clk, &lp_apm_clk, &pfd0_clk, + &pfd1_clk, &pfd4_clk, &osc_clk); + reg = reg & ~MX50_CCM_CSCMR1_ESDHC3_CLK_SEL_MASK; + reg |= mux << MX50_CCM_CSCMR1_ESDHC3_CLK_SEL_OFFSET; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +static void _clk_esdhc3_recalc(struct clk *clk) +{ + u32 reg, prediv, podf; + + reg = __raw_readl(MXC_CCM_CSCDR1); + prediv = ((reg & MXC_CCM_CSCDR1_ESDHC3_MSHC2_CLK_PRED_MASK) >> + MXC_CCM_CSCDR1_ESDHC3_MSHC2_CLK_PRED_OFFSET) + 1; + podf = ((reg & MXC_CCM_CSCDR1_ESDHC3_MSHC2_CLK_PODF_MASK) >> + MXC_CCM_CSCDR1_ESDHC3_MSHC2_CLK_PODF_OFFSET) + 1; + + clk->rate = clk->parent->rate / (prediv * podf); +} + +static int _clk_esdhc3_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + u32 div; + u32 pre, post; + + div = clk->parent->rate / rate; + + if ((clk->parent->rate / div) != rate) + return -EINVAL; + + __calc_pre_post_dividers(div, &pre, &post); + + /* Set sdhc1 clock divider */ + reg = __raw_readl(MXC_CCM_CSCDR1) & + ~(MXC_CCM_CSCDR1_ESDHC3_MSHC2_CLK_PRED_MASK | + MXC_CCM_CSCDR1_ESDHC3_MSHC2_CLK_PODF_MASK); + reg |= (post - 1) << MXC_CCM_CSCDR1_ESDHC3_MSHC2_CLK_PODF_OFFSET; + reg |= (pre - 1) << MXC_CCM_CSCDR1_ESDHC3_MSHC2_CLK_PRED_OFFSET; + __raw_writel(reg, MXC_CCM_CSCDR1); + + clk->rate = rate; + return 0; +} + + +static struct clk esdhc3_clk[] = { + { + .name = "esdhc_clk", + .id = 2, + .parent = &pll2_sw_clk, + .set_parent = _clk_esdhc3_set_parent, + .recalc = _clk_esdhc3_recalc, + .set_rate = _clk_esdhc3_set_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGR3_CG5_OFFSET, + .disable = _clk_disable, + .secondary = &esdhc3_clk[1], + .flags = AHB_HIGH_SET_POINT | CPU_FREQ_TRIG_UPDATE, + }, + { + .name = "esdhc_ipg_clk", + .id = 2, + .parent = &ipg_clk, + .secondary = &esdhc3_clk[2], + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGR3_CG4_OFFSET, + .disable = _clk_disable, + }, + { + .name = "esdhc_sec_clk", + .id = 0, + .parent = &ahb_max_clk, + .secondary = &esdhc_dep_clks, + }, +}; + +static int _clk_esdhc4_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CSCMR1); + if (parent == &esdhc1_clk[0]) + reg &= ~MX50_CCM_CSCMR1_ESDHC4_CLK_SEL; + else if (parent == &esdhc3_clk[0]) + reg |= MX50_CCM_CSCMR1_ESDHC4_CLK_SEL; + else + BUG(); + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +static struct clk esdhc4_clk[] = { + { + .name = "esdhc_clk", + .id = 3, + .parent = &esdhc1_clk[0], + .set_parent = _clk_esdhc4_set_parent, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGR3_CG7_OFFSET, + .disable = _clk_disable, + .secondary = &esdhc4_clk[1], + .flags = AHB_HIGH_SET_POINT | CPU_FREQ_TRIG_UPDATE, + }, + { + .name = "esdhc_ipg_clk", + .id = 3, + .parent = &ipg_clk, + .secondary = &esdhc4_clk[2], + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR3, + .enable_shift = MXC_CCM_CCGR3_CG6_OFFSET, + .disable = _clk_disable, + }, + { + .name = "esdhc_sec_clk", + .id = 0, + .parent = &tmax2_clk, + .secondary = &esdhc_dep_clks, + }, +}; + +static int _clk_ddr_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CLK_DDR); + if (parent == &pfd0_clk) + reg |= MXC_CCM_CLK_DDR_DDR_PFD_SEL; + else if (parent == &pll1_sw_clk) + reg &= ~MXC_CCM_CLK_DDR_DDR_PFD_SEL; + else + return -EINVAL; + __raw_writel(reg, MXC_CCM_CLK_DDR); + return 0; +} + +static void _clk_ddr_recalc(struct clk *clk) +{ + u32 reg, div; + + reg = __raw_readl(MXC_CCM_CLK_DDR); + div = (reg & MXC_CCM_CLK_DDR_DDR_DIV_PLL_MASK) >> + MXC_CCM_CLK_DDR_DDR_DIV_PLL_OFFSET; + if (div) + clk->rate = clk->parent->rate / div; + else + clk->rate = 0; +} + +static int _clk_ddr_enable(struct clk *clk) +{ + u32 reg; + + _clk_enable(clk); + reg = (__raw_readl(databahn + DATABAHN_CTL_REG55)) & + DDR_SYNC_MODE; + if (reg != DDR_SYNC_MODE) { + reg = __raw_readl(MXC_CCM_CLK_DDR); + reg |= MXC_CCM_CLK_DDR_DDR_CLKGATE_MASK; + __raw_writel(reg, MXC_CCM_CLK_DDR); + } + return 0; +} + +static void _clk_ddr_disable(struct clk *clk) +{ + _clk_disable_inwait(clk); +} + + +static struct clk ddr_clk = { + .name = "ddr_clk", + .parent = &pll1_sw_clk, + .secondary = &sys_clk, + .set_parent = _clk_ddr_set_parent, + .recalc = _clk_ddr_recalc, + .enable = _clk_ddr_enable, + .enable_reg = MXC_CCM_CCGR6, + .enable_shift = MXC_CCM_CCGR6_CG15_OFFSET, + .disable = _clk_ddr_disable, +}; + +static void _clk_pgc_recalc(struct clk *clk) +{ + u32 reg, div; + + reg = __raw_readl(MXC_CCM_CSCDR1); + div = (reg & MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK) >> + MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET; + div = 1 >> div; + clk->rate = clk->parent->rate / div; +} + +static struct clk pgc_clk = { + .name = "pgc_clk", + .parent = &ipg_clk, + .recalc = _clk_pgc_recalc, +}; + +/*usb OTG clock */ +static struct clk usb_clk = { + .name = "usb_clk", + .rate = 60000000, +}; + +static struct clk rtc_clk = { + .name = "rtc_clk", + .parent = &ckil_clk, + .secondary = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR4, + .enable_shift = MXC_CCM_CCGR4_CG14_OFFSET, + .disable = _clk_disable, +}; + +struct clk rng_clk = { + .name = "rng_clk", + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR7, + .enable_shift = MXC_CCM_CCGR7_CG1_OFFSET, + .disable = _clk_disable, +}; + +static struct clk owire_clk = { + /* 1w driver come from upstream and use owire as clock name*/ + .name = "owire", + .parent = &ipg_perclk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR2, + .enable_shift = MXC_CCM_CCGR2_CG11_OFFSET, + .disable = _clk_disable, +}; + +static struct clk fec_clk[] = { + { + .name = "fec_clk", + .parent = &ipg_clk, + .secondary = &fec_clk[1], + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR2, + .enable_shift = MXC_CCM_CCGR2_CG12_OFFSET, + .disable = _clk_disable, + .flags = AHB_HIGH_SET_POINT | CPU_FREQ_TRIG_UPDATE, + }, + { + .name = "fec_sec1_clk", + .parent = &aips_tz2_clk, + .secondary = &ddr_clk, + }, +}; + +static int gpmi_clk_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_GPMI); + reg |= MXC_CCM_GPMI_CLKGATE_MASK; + __raw_writel(reg, MXC_CCM_GPMI); + _clk_enable(clk); + return 0; +} + +static void gpmi_clk_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_GPMI); + reg &= ~MXC_CCM_GPMI_CLKGATE_MASK; + __raw_writel(reg, MXC_CCM_GPMI); + _clk_disable(clk); +} + +static int bch_clk_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_BCH); + reg |= MXC_CCM_BCH_CLKGATE_MASK; + __raw_writel(reg, MXC_CCM_BCH); + _clk_enable(clk); + return 0; +} + +static void bch_clk_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_BCH); + reg &= ~MXC_CCM_BCH_CLKGATE_MASK; + __raw_writel(reg, MXC_CCM_BCH); + _clk_disable(clk); +} + +static struct clk gpmi_nfc_clk[] = { + { + .name = "gpmi-nfc", + .parent = &osc_clk, + .secondary = &gpmi_nfc_clk[1], + .enable = gpmi_clk_enable, + .enable_reg = MXC_CCM_CCGR7, + .enable_shift = MXC_CCM_CCGR7_CG9_OFFSET, + .disable = gpmi_clk_disable, + }, + { + .name = "gpmi-apb", + .parent = &ahb_clk, + .secondary = &gpmi_nfc_clk[2], + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR7, + .enable_shift = MXC_CCM_CCGR7_CG8_OFFSET, + .disable = _clk_disable, + }, + { + .name = "bch", + .parent = &osc_clk, + .secondary = &gpmi_nfc_clk[3], + .enable = bch_clk_enable, + .enable_reg = MXC_CCM_CCGR7, + .enable_shift = MXC_CCM_CCGR7_CG0_OFFSET, + .disable = bch_clk_disable, + }, + { + .name = "bch-apb", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR7, + .enable_shift = MXC_CCM_CCGR7_CG12_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk ocotp_clk = { + .name = "ocotp_ctrl_apb", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR7, + .enable_shift = MXC_CCM_CCGR7_CG13_OFFSET, + .disable = _clk_disable, +}; + +static int _clk_gpu2d_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + reg = __raw_readl(MXC_CCM_CBCMR); + mux = _get_mux(parent, &axi_a_clk, &axi_b_clk, &weim_clk[0], &ahb_clk); + reg = (reg & ~MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK) | + (mux << MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET); + __raw_writel(reg, MXC_CCM_CBCMR); + + return 0; +} + +static struct clk gpu2d_clk = { + .name = "gpu2d_clk", + .parent = &axi_a_clk, + .secondary = &ddr_clk, + .set_parent = _clk_gpu2d_set_parent, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR6, + .enable_shift = MXC_CCM_CCGR6_CG7_OFFSET, + .disable = _clk_disable, + .flags = AHB_HIGH_SET_POINT | CPU_FREQ_TRIG_UPDATE, +}; + +static struct clk apbh_dma_clk = { + .name = "apbh_dma_clk", + .parent = &ahb_clk, + .secondary = &ddr_clk, + .enable = _clk_enable, + .disable = _clk_disable_inwait, + .enable_reg = MXC_CCM_CCGR7, + .enable_shift = MXC_CCM_CCGR7_CG10_OFFSET, +}; + +struct clk dcp_clk = { + .name = "dcp_clk", + .id = 0, + .parent = &ahb_clk, + .secondary = &apbh_dma_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CCGR7, + .enable_shift = MXC_CCM_CCGR7_CG11_OFFSET, + .disable = _clk_disable, +}; + +static int _clk_display_axi_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + reg = __raw_readl(MXC_CCM_CLKSEQ_BYPASS); + mux = _get_mux(parent, &osc_clk, &pfd2_clk, &pll1_sw_clk, NULL); + reg = (reg & ~MXC_CCM_CLKSEQ_BYPASS_BYPASS_DISPLAY_AXI_CLK_SEL_MASK) | + (mux << MXC_CCM_CLKSEQ_BYPASS_BYPASS_DISPLAY_AXI_CLK_SEL_OFFSET); + __raw_writel(reg, MXC_CCM_CLKSEQ_BYPASS); + + return 0; +} + +static void _clk_display_axi_recalc(struct clk *clk) +{ + u32 div; + + div = __raw_readl(MXC_CCM_DISPLAY_AXI); + div &= MXC_CCM_DISPLAY_AXI_DIV_MASK; + if (div == 0) { /* gated off */ + clk->rate = clk->parent->rate; + } else { + clk->rate = clk->parent->rate / div; + } +} + +static unsigned long _clk_display_axi_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 max_div = (2 << 6) - 1; + return _clk_round_rate_div(clk, rate, max_div, NULL); +} + +static int _clk_display_axi_set_rate(struct clk *clk, unsigned long rate) +{ + u32 new_div, max_div; + u32 reg; + + max_div = (2 << 6) - 1; + clk->rate = _clk_round_rate_div(clk, rate, max_div, &new_div); + + reg = __raw_readl(MXC_CCM_DISPLAY_AXI); + reg &= ~MXC_CCM_DISPLAY_AXI_DIV_MASK; + reg |= new_div << MXC_CCM_DISPLAY_AXI_DIV_OFFSET; + __raw_writel(reg, MXC_CCM_DISPLAY_AXI); + + while (__raw_readl(MXC_CCM_CSR2) & MXC_CCM_CSR2_DISPLAY_AXI_BUSY) + ; + return 0; +} + +static struct clk display_axi_clk = { + .name = "display_axi", + .parent = &osc_clk, + .secondary = &apbh_dma_clk, + .set_parent = _clk_display_axi_set_parent, + .recalc = _clk_display_axi_recalc, + .set_rate = _clk_display_axi_set_rate, + .round_rate = _clk_display_axi_round_rate, + .enable = _clk_enable, + .disable = _clk_disable, + .enable_reg = MXC_CCM_DISPLAY_AXI, + .enable_shift = MXC_CCM_DISPLAY_AXI_CLKGATE_OFFSET, + .flags = RATE_PROPAGATES, +}; + +/* TODO: check Auto-Slow Mode */ +static struct clk pxp_axi_clk = { + .name = "pxp_axi", + .parent = &display_axi_clk, + .enable = _clk_enable, + .disable = _clk_disable, + .enable_reg = MXC_CCM_CCGR6, + .enable_shift = MXC_CCM_CCGR6_CG9_OFFSET, + .flags = AHB_MED_SET_POINT | CPU_FREQ_TRIG_UPDATE, +}; + +static struct clk elcdif_axi_clk = { + .name = "elcdif_axi", + .parent = &display_axi_clk, + .enable = _clk_enable, + .disable = _clk_disable, + .enable_reg = MXC_CCM_CCGR6, + .enable_shift = MXC_CCM_CCGR6_CG10_OFFSET, + .flags = AHB_MED_SET_POINT | CPU_FREQ_TRIG_UPDATE, +}; + +static int _clk_elcdif_pix_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + reg = __raw_readl(MXC_CCM_CLKSEQ_BYPASS); + mux = _get_mux(parent, &osc_clk, &pfd6_clk, &pll1_sw_clk, &ckih_clk); + reg = (reg & ~MXC_CCM_CLKSEQ_BYPASS_BYPASS_ELCDIF_PIX_CLK_SEL_MASK) | + (mux << MXC_CCM_CLKSEQ_BYPASS_BYPASS_ELCDIF_PIX_CLK_SEL_OFFSET); + __raw_writel(reg, MXC_CCM_CLKSEQ_BYPASS); + + return 0; +} + +static void _clk_elcdif_pix_recalc(struct clk *clk) +{ + u32 reg, prediv, podf; + + reg = __raw_readl(MXC_CCM_ELCDIFPIX); + prediv = ((reg & MXC_CCM_ELCDIFPIX_CLK_PRED_MASK) >> + MXC_CCM_ELCDIFPIX_CLK_PRED_OFFSET) + 1; + podf = ((reg & MXC_CCM_ELCDIFPIX_CLK_PODF_MASK) >> + MXC_CCM_ELCDIFPIX_CLK_PODF_OFFSET) + 1; + + clk->rate = clk->parent->rate / (prediv * podf); +} + +static unsigned long _clk_elcdif_pix_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 max_div = (2 << 12) - 1; + return _clk_round_rate_div(clk, rate, max_div, NULL); +} + +static int _clk_elcdif_pix_set_rate(struct clk *clk, unsigned long rate) +{ + u32 new_div, max_div; + u32 reg; + + max_div = (2 << 12) - 1; + clk->rate = _clk_round_rate_div(clk, rate, max_div, &new_div); + + reg = __raw_readl(MXC_CCM_ELCDIFPIX); + /* Pre-divider set to 1 - only use PODF for clk dividing */ + reg &= ~MXC_CCM_ELCDIFPIX_CLK_PRED_MASK; + reg |= 1 << MXC_CCM_ELCDIFPIX_CLK_PRED_OFFSET; + reg &= ~MXC_CCM_ELCDIFPIX_CLK_PODF_MASK; + reg |= new_div << MXC_CCM_ELCDIFPIX_CLK_PODF_OFFSET; + __raw_writel(reg, MXC_CCM_ELCDIFPIX); + + return 0; +} + +static int _clk_elcdif_pix_enable(struct clk *clk) +{ + u32 reg; + + _clk_enable(clk); + reg = __raw_readl(MXC_CCM_ELCDIFPIX); + reg |= 0x3 << MXC_CCM_ELCDIFPIX_CLKGATE_OFFSET; + __raw_writel(reg, MXC_CCM_ELCDIFPIX); + return 0; +} + +static void _clk_elcdif_pix_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_ELCDIFPIX); + reg &= ~MXC_CCM_ELCDIFPIX_CLKGATE_MASK; + __raw_writel(reg, MXC_CCM_ELCDIFPIX); + _clk_disable(clk); +} + +static struct clk elcdif_pix_clk = { + .name = "elcdif_pix", + .parent = &osc_clk, + .secondary = &ddr_clk, + .enable = _clk_elcdif_pix_enable, + .disable = _clk_elcdif_pix_disable, + .enable_reg = MXC_CCM_CCGR6, + .enable_shift = MXC_CCM_CCGR6_CG6_OFFSET, + .set_parent = _clk_elcdif_pix_set_parent, + .recalc = _clk_elcdif_pix_recalc, + .round_rate = _clk_elcdif_pix_round_rate, + .set_rate = _clk_elcdif_pix_set_rate, + .flags = AHB_MED_SET_POINT | CPU_FREQ_TRIG_UPDATE, +}; + +static int _clk_epdc_axi_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + reg = __raw_readl(MXC_CCM_CLKSEQ_BYPASS); + mux = _get_mux(parent, &osc_clk, &pfd3_clk, &pll1_sw_clk, NULL); + reg = (reg & ~MXC_CCM_CLKSEQ_BYPASS_BYPASS_EPDC_AXI_CLK_SEL_MASK) | + (mux << MXC_CCM_CLKSEQ_BYPASS_BYPASS_EPDC_AXI_CLK_SEL_OFFSET); + __raw_writel(reg, MXC_CCM_CLKSEQ_BYPASS); + + return 0; +} + +static void _clk_epdc_axi_recalc(struct clk *clk) +{ + u32 div; + + div = __raw_readl(MXC_CCM_EPDC_AXI); + div &= MXC_CCM_EPDC_AXI_DIV_MASK; + if (div == 0) { /* gated off */ + clk->rate = clk->parent->rate; + } else { + clk->rate = clk->parent->rate / div; + } +} + +static unsigned long _clk_epdc_axi_round_rate_div(struct clk *clk, + unsigned long rate, + u32 *new_div) +{ + u32 div, max_div; + + max_div = (2 << 6) - 1; + div = DIV_ROUND_UP(clk->parent->rate, rate); + if (div > max_div) + div = max_div; + else if (div == 0) + div++; + if (new_div != NULL) + *new_div = div; + return clk->parent->rate / div; +} + +static unsigned long _clk_epdc_axi_round_rate(struct clk *clk, + unsigned long rate) +{ + return _clk_epdc_axi_round_rate_div(clk, rate, NULL); +} + +static int _clk_epdc_axi_set_rate(struct clk *clk, unsigned long rate) +{ + u32 new_div; + u32 reg; + + clk->rate = _clk_epdc_axi_round_rate_div(clk, rate, &new_div); + + reg = __raw_readl(MXC_CCM_EPDC_AXI); + reg &= ~MXC_CCM_EPDC_AXI_DIV_MASK; + reg |= new_div << MXC_CCM_EPDC_AXI_DIV_OFFSET; + __raw_writel(reg, MXC_CCM_EPDC_AXI); + + while (__raw_readl(MXC_CCM_CSR2) & MXC_CCM_CSR2_EPDC_AXI_BUSY) + ; + + return 0; +} + +static int _clk_epdc_axi_enable(struct clk *clk) +{ + u32 reg; + + _clk_enable(clk); + reg = __raw_readl(MXC_CCM_EPDC_AXI); + reg |= MXC_CCM_EPDC_AXI_CLKGATE_MASK; + __raw_writel(reg, MXC_CCM_EPDC_AXI); + + return 0; +} + +static void _clk_epdc_axi_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_EPDC_AXI); + reg &= ~MXC_CCM_EPDC_AXI_CLKGATE_MASK; + __raw_writel(reg, MXC_CCM_EPDC_AXI); + _clk_disable(clk); +} + +/* TODO: check Auto-Slow Mode */ +static struct clk epdc_axi_clk = { + .name = "epdc_axi", + .parent = &osc_clk, + .secondary = &apbh_dma_clk, + .enable_reg = MXC_CCM_CCGR6, + .enable_shift = MXC_CCM_CCGR6_CG8_OFFSET, + .set_parent = _clk_epdc_axi_set_parent, + .recalc = _clk_epdc_axi_recalc, + .set_rate = _clk_epdc_axi_set_rate, + .round_rate = _clk_epdc_axi_round_rate, + .enable = _clk_epdc_axi_enable, + .disable = _clk_epdc_axi_disable, + .flags = AHB_MED_SET_POINT | CPU_FREQ_TRIG_UPDATE, +}; + + +static int _clk_epdc_pix_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + reg = __raw_readl(MXC_CCM_CLKSEQ_BYPASS); + mux = _get_mux(parent, &osc_clk, &pfd5_clk, &pll1_sw_clk, &ckih_clk); + reg = (reg & ~MXC_CCM_CLKSEQ_BYPASS_BYPASS_EPDC_PIX_CLK_SEL_MASK) | + (mux << MXC_CCM_CLKSEQ_BYPASS_BYPASS_EPDC_PIX_CLK_SEL_OFFSET); + __raw_writel(reg, MXC_CCM_CLKSEQ_BYPASS); + + return 0; +} + +static void _clk_epdc_pix_recalc(struct clk *clk) +{ + u32 div; + + div = __raw_readl(MXC_CCM_EPDCPIX); + div &= MXC_CCM_EPDC_PIX_CLK_PODF_MASK; + if (div == 0) { /* gated off */ + clk->rate = clk->parent->rate; + } else { + clk->rate = clk->parent->rate / div; + } +} + +static unsigned long _clk_epdc_pix_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 max_div = (2 << 12) - 1; + return _clk_round_rate_div(clk, rate, max_div, NULL); +} + +static int _clk_epdc_pix_set_rate(struct clk *clk, unsigned long rate) +{ + u32 new_div, max_div; + u32 reg; + + max_div = (2 << 12) - 1; + clk->rate = _clk_round_rate_div(clk, rate, max_div, &new_div); + + reg = __raw_readl(MXC_CCM_EPDCPIX); + /* Pre-divider set to 1 - only use PODF for clk dividing */ + reg &= ~MXC_CCM_EPDC_PIX_CLK_PRED_MASK; + reg |= 1 << MXC_CCM_EPDC_PIX_CLK_PRED_OFFSET; + reg &= ~MXC_CCM_EPDC_PIX_CLK_PODF_MASK; + reg |= new_div << MXC_CCM_EPDC_PIX_CLK_PODF_OFFSET; + __raw_writel(reg, MXC_CCM_EPDCPIX); + + while (__raw_readl(MXC_CCM_CSR2) & MXC_CCM_CSR2_EPDC_PIX_BUSY) + ; + + return 0; +} + +static int _clk_epdc_pix_enable(struct clk *clk) +{ + u32 reg; + + _clk_enable(clk); + reg = __raw_readl(MXC_CCM_EPDCPIX); + reg |= MXC_CCM_EPDC_PIX_CLKGATE_MASK; + __raw_writel(reg, MXC_CCM_EPDCPIX); + + return 0; +} + +static void _clk_epdc_pix_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_EPDCPIX); + reg &= ~MXC_CCM_EPDC_PIX_CLKGATE_MASK; + __raw_writel(reg, MXC_CCM_EPDCPIX); + _clk_disable(clk); +} + +/* TODO: check Auto-Slow Mode */ +static struct clk epdc_pix_clk = { + .name = "epdc_pix", + .parent = &osc_clk, + .secondary = &apbh_dma_clk, + .enable_reg = MXC_CCM_CCGR6, + .enable_shift = MXC_CCM_CCGR6_CG5_OFFSET, + .set_parent = _clk_epdc_pix_set_parent, + .recalc = _clk_epdc_pix_recalc, + .set_rate = _clk_epdc_pix_set_rate, + .round_rate = _clk_epdc_pix_round_rate, + .enable = _clk_epdc_pix_enable, + .disable = _clk_epdc_pix_disable, + .flags = AHB_MED_SET_POINT | CPU_FREQ_TRIG_UPDATE, +}; + +static void cko1_recalc(struct clk *clk) +{ + unsigned long rate; + u32 reg; + + reg = __raw_readl(MXC_CCM_CCOSR); + reg &= MX50_CCM_CCOSR_CKO1_DIV_MASK; + reg = reg >> MX50_CCM_CCOSR_CKO1_DIV_OFFSET; + rate = clk->parent->rate; + clk->rate = rate / (reg + 1); +} + +static int cko1_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CCOSR); + reg |= MX50_CCM_CCOSR_CKO1_EN; + __raw_writel(reg, MXC_CCM_CCOSR); + return 0; +} + +static void cko1_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CCOSR); + reg &= ~MX50_CCM_CCOSR_CKO1_EN; + __raw_writel(reg, MXC_CCM_CCOSR); +} + +static int cko1_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div; + + div = (clk->parent->rate/rate - 1) & 0x7; + reg = __raw_readl(MXC_CCM_CCOSR); + reg &= ~MX50_CCM_CCOSR_CKO1_DIV_MASK; + reg |= div << MX50_CCM_CCOSR_CKO1_DIV_OFFSET; + __raw_writel(reg, MXC_CCM_CCOSR); + return 0; +} + +static unsigned long cko1_round_rate(struct clk *clk, unsigned long rate) +{ + u32 div; + + div = clk->parent->rate / rate; + div = div < 1 ? 1 : div; + div = div > 8 ? 8 : div; + return clk->parent->rate / div; +} + +static int cko1_set_parent(struct clk *clk, struct clk *parent) +{ + u32 sel, reg, fast; + + if (parent == &cpu_clk) { + sel = 0; + fast = 1; + } else if (parent == &pll1_sw_clk) { + sel = 1; + fast = 1; + } else if (parent == &pll2_sw_clk) { + sel = 2; + fast = 1; + } else if (parent == &pll3_sw_clk) { + sel = 3; + fast = 1; + } else if (parent == &apll_clk) { + sel = 0; + fast = 0; + } else if (parent == &pfd0_clk) { + sel = 1; + fast = 0; + } else if (parent == &pfd1_clk) { + sel = 2; + fast = 0; + } else if (parent == &pfd2_clk) { + sel = 3; + fast = 0; + } else if (parent == &pfd3_clk) { + sel = 4; + fast = 0; + } else if (parent == &pfd4_clk) { + sel = 5; + fast = 0; + } else if (parent == &pfd5_clk) { + sel = 6; + fast = 0; + } else if (parent == &pfd6_clk) { + sel = 7; + fast = 0; + } else if (parent == &weim_clk[0]) { + sel = 10; + fast = 0; + } else if (parent == &ahb_clk) { + sel = 11; + fast = 0; + } else if (parent == &ipg_clk) { + sel = 12; + fast = 0; + } else if (parent == &ipg_perclk) { + sel = 13; + fast = 0; + } else if (parent == &pfd7_clk) { + sel = 15; + fast = 0; + } else + return -EINVAL; + + reg = __raw_readl(MXC_CCM_CCOSR); + reg &= ~MX50_CCM_CCOSR_CKO1_SEL_MASK; + reg |= sel << MX50_CCM_CCOSR_CKO1_SEL_OFFSET; + if (fast) + reg &= ~MX50_CCM_CCOSR_CKO1_SLOW_SEL; + else + reg |= MX50_CCM_CCOSR_CKO1_SLOW_SEL; + __raw_writel(reg, MXC_CCM_CCOSR); + return 0; +} + +static struct clk cko1_clk = { + .name = "cko1_clk", + .parent = &pll1_sw_clk, + .recalc = cko1_recalc, + .enable = cko1_enable, + .disable = cko1_disable, + .set_rate = cko1_set_rate, + .round_rate = cko1_round_rate, + .set_parent = cko1_set_parent, +}; + +static struct clk *mxc_clks[] = { + &osc_clk, + &ckih_clk, + &ckih2_clk, + &ckil_clk, + &pll1_main_clk, + &pll1_sw_clk, + &pll2_sw_clk, + &pll3_sw_clk, + &apll_clk, + &pfd0_clk, + &pfd1_clk, + &pfd2_clk, + &pfd3_clk, + &pfd4_clk, + &pfd5_clk, + &pfd6_clk, + &pfd7_clk, + &ipmux1_clk, + &ipmux2_clk, + &gpc_dvfs_clk, + &lp_apm_clk, + &cpu_clk, + &main_bus_clk, + &axi_a_clk, + &axi_b_clk, + &ahb_clk, + &ahb_max_clk, + &ipg_clk, + &ipg_perclk, + &ahbmux1_clk, + &aips_tz1_clk, + &aips_tz2_clk, + &sdma_clk[0], + &sdma_clk[1], + &uart_main_clk, + &uart1_clk[0], + &uart1_clk[1], + &uart2_clk[0], + &uart2_clk[1], + &uart3_clk[0], + &uart3_clk[1], + &spba_clk, + &i2c_clk[0], + &i2c_clk[1], + &gpt_clk[0], + &gpt_clk[1], + &gpt_clk[2], + &pwm1_clk[0], + &pwm1_clk[1], + &pwm1_clk[2], + &pwm2_clk[0], + &pwm2_clk[1], + &pwm2_clk[2], + &cspi_main_clk, + &cspi1_clk[0], + &cspi1_clk[1], + &cspi2_clk[0], + &cspi2_clk[1], + &cspi3_clk, + &ssi_lp_apm_clk, + &ssi1_clk[0], + &ssi1_clk[1], + &ssi1_clk[2], + &ssi2_clk[0], + &ssi2_clk[1], + &ssi2_clk[2], + &ssi_ext1_clk, + &ssi_ext2_clk, + &tmax2_clk, + &usb_ahb_clk, + &usb_phy_clk[0], + &usb_clk, + &esdhc1_clk[0], + &esdhc1_clk[1], + &esdhc2_clk[0], + &esdhc2_clk[1], + &esdhc3_clk[0], + &esdhc3_clk[1], + &esdhc4_clk[0], + &esdhc4_clk[1], + &esdhc_dep_clks, + &weim_clk[0], + &weim_clk[1], + &ddr_clk, + &pgc_clk, + &rtc_clk, + &rng_clk, + &dcp_clk, + &owire_clk, + &fec_clk[0], + &fec_clk[1], + &gpu2d_clk, + &cko1_clk, + &display_axi_clk, + &pxp_axi_clk, + &elcdif_axi_clk, + &epdc_axi_clk, + &epdc_pix_clk, + &elcdif_pix_clk, + &gpmi_nfc_clk[0], + &gpmi_nfc_clk[1], + &gpmi_nfc_clk[2], + &gpmi_nfc_clk[3], + &ocotp_clk, +}; + +static void clk_tree_init(void) +{ + u32 reg; + + ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk); + + /* + *Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at + * 8MHz, its derived from lp_apm. + */ + reg = __raw_readl(MXC_CCM_CBCDR); + reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK; + reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK; + reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK; + reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET); + __raw_writel(reg, MXC_CCM_CBCDR); + + /* set pll1_main_clk parent */ + pll1_main_clk.parent = &osc_clk; + + /* set pll2_sw_clk parent */ + pll2_sw_clk.parent = &osc_clk; + + /* set pll3_clk parent */ + pll3_sw_clk.parent = &osc_clk; + + /* set weim_clk parent */ + weim_clk[0].parent = &main_bus_clk; + reg = __raw_readl(MXC_CCM_CBCDR); + if ((reg & MX50_CCM_CBCDR_WEIM_CLK_SEL) != 0) + weim_clk[0].parent = &ahb_clk; + + /* set ipg_perclk parent */ + ipg_perclk.parent = &lp_apm_clk; + reg = __raw_readl(MXC_CCM_CBCMR); + if ((reg & MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL) != 0) { + ipg_perclk.parent = &ipg_clk; + } else { + if ((reg & MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL) == 0) + ipg_perclk.parent = &main_bus_clk; + } +} + +int __init mx50_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1) +{ + __iomem void *base; + struct clk **clkp; + int i = 0, j = 0, reg; + int wp_cnt = 0; + + pll1_base = ioremap(MX53_BASE_ADDR(PLL1_BASE_ADDR), SZ_4K); + pll2_base = ioremap(MX53_BASE_ADDR(PLL2_BASE_ADDR), SZ_4K); + pll3_base = ioremap(MX53_BASE_ADDR(PLL3_BASE_ADDR), SZ_4K); + apll_base = ioremap(ANATOP_BASE_ADDR, SZ_4K); + + /* Turn off all possible clocks */ + if (mxc_jtag_enabled) { + __raw_writel(1 << MXC_CCM_CCGR0_CG0_OFFSET | + 3 << MXC_CCM_CCGR0_CG2_OFFSET | + 3 << MXC_CCM_CCGR0_CG3_OFFSET | + 3 << MXC_CCM_CCGR0_CG4_OFFSET | + 3 << MXC_CCM_CCGR0_CG8_OFFSET | + 1 << MXC_CCM_CCGR0_CG12_OFFSET | + 1 << MXC_CCM_CCGR0_CG13_OFFSET | + 1 << MXC_CCM_CCGR0_CG14_OFFSET, MXC_CCM_CCGR0); + } else { + __raw_writel(1 << MXC_CCM_CCGR0_CG0_OFFSET | + 3 << MXC_CCM_CCGR0_CG3_OFFSET | + 3 << MXC_CCM_CCGR0_CG8_OFFSET | + 1 << MXC_CCM_CCGR0_CG12_OFFSET | + 1 << MXC_CCM_CCGR0_CG13_OFFSET | + 3 << MXC_CCM_CCGR0_CG14_OFFSET, MXC_CCM_CCGR0); + } + + __raw_writel(0, MXC_CCM_CCGR1); + __raw_writel(0, MXC_CCM_CCGR2); + __raw_writel(0, MXC_CCM_CCGR3); + __raw_writel(0, MXC_CCM_CCGR4); + + __raw_writel(3 << MXC_CCM_CCGR5_CG6_OFFSET | + 1 << MXC_CCM_CCGR5_CG8_OFFSET | + 3 << MXC_CCM_CCGR5_CG9_OFFSET, MXC_CCM_CCGR5); + + __raw_writel(3 << MXC_CCM_CCGR6_CG0_OFFSET | + 3 << MXC_CCM_CCGR6_CG1_OFFSET | + 2 << MXC_CCM_CCGR6_CG14_OFFSET | + 3 << MXC_CCM_CCGR6_CG15_OFFSET, MXC_CCM_CCGR6); + + __raw_writel(0, MXC_CCM_CCGR7); + + ckil_clk.rate = ckil; + osc_clk.rate = osc; + ckih_clk.rate = ckih1; + + usb_phy_clk[0].enable_reg = MXC_CCM_CCGR4; + usb_phy_clk[0].enable_shift = MXC_CCM_CCGR4_CG5_OFFSET; + + clk_tree_init(); + + for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++) + clk_register(*clkp); + + clk_register(&uart4_clk[0]); + clk_register(&uart4_clk[1]); + clk_register(&uart5_clk[0]); + clk_register(&uart5_clk[1]); + clk_register(&i2c_clk[2]); + clk_register(&usb_phy_clk[1]); + clk_register(&ocram_clk); + clk_register(&apbh_dma_clk); + clk_register(&sys_clk); + + /* set DDR clock parent */ + reg = __raw_readl(MXC_CCM_CLK_DDR) & + MXC_CCM_CLK_DDR_DDR_PFD_SEL; + if (reg) + clk_set_parent(&ddr_clk, &pfd0_clk); + else + clk_set_parent(&ddr_clk, &pll1_sw_clk); + + clk_set_parent(&esdhc1_clk[0], &pll2_sw_clk); + clk_set_parent(&esdhc1_clk[2], &tmax2_clk); + clk_set_parent(&esdhc2_clk[0], &esdhc1_clk[0]); + clk_set_parent(&esdhc3_clk[0], &pll2_sw_clk); + + /* This will propagate to all children and init all the clock rates */ + propagate_rate(&osc_clk); + propagate_rate(&ckih_clk); + propagate_rate(&ckil_clk); + propagate_rate(&pll1_sw_clk); + propagate_rate(&pll2_sw_clk); + propagate_rate(&pll3_sw_clk); + propagate_rate(&apll_clk); + + clk_enable(&cpu_clk); + + clk_enable(&main_bus_clk); + + clk_enable(&ocotp_clk); + + databahn = ioremap(MX50_DATABAHN_BASE_ADDR, SZ_16K); + + /* Initialise the parents to be axi_b, parents are set to + * axi_a when the clocks are enabled. + */ + + clk_set_parent(&gpu2d_clk, &axi_a_clk); + + /* move cspi to 24MHz */ + clk_set_parent(&cspi_main_clk, &lp_apm_clk); + clk_set_rate(&cspi_main_clk, 12000000); + + /* + * Set DISPLAY_AXI to 200Mhz + * For Display AXI, source clocks must be + * enabled before dividers can be changed + */ + clk_enable(&display_axi_clk); + clk_enable(&elcdif_axi_clk); + clk_enable(&pxp_axi_clk); + clk_set_parent(&display_axi_clk, &pfd2_clk); + clk_set_rate(&display_axi_clk, 200000000); + clk_disable(&display_axi_clk); + clk_disable(&pxp_axi_clk); + clk_disable(&elcdif_axi_clk); + + clk_enable(&elcdif_pix_clk); + clk_set_parent(&elcdif_pix_clk, &pll1_sw_clk); + clk_disable(&elcdif_pix_clk); + + /* + * Enable and set EPDC AXI to 200MHz + * For EPDC AXI, source clocks must be + * enabled before dividers can be changed + */ + clk_enable(&epdc_axi_clk); + clk_set_parent(&epdc_axi_clk, &pfd3_clk); + clk_set_rate(&epdc_axi_clk, 200000000); + clk_disable(&epdc_axi_clk); + + clk_set_parent(&epdc_pix_clk, &pfd5_clk); + + /* Move SSI clocks to SSI_LP_APM clock */ + clk_set_parent(&ssi_lp_apm_clk, &lp_apm_clk); + + clk_set_parent(&ssi1_clk[0], &ssi_lp_apm_clk); + /* set the SSI dividers to divide by 2 */ + reg = __raw_readl(MXC_CCM_CS1CDR); + reg &= ~MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK; + reg &= ~MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK; + reg |= 1 << MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET; + __raw_writel(reg, MXC_CCM_CS1CDR); + + clk_set_parent(&ssi2_clk[0], &ssi_lp_apm_clk); + reg = __raw_readl(MXC_CCM_CS2CDR); + reg &= ~MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK; + reg &= ~MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK; + reg |= 1 << MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET; + __raw_writel(reg, MXC_CCM_CS2CDR); + + /* Change the SSI_EXT1_CLK to be sourced from SSI1_CLK_ROOT */ + clk_set_parent(&ssi_ext1_clk, &ssi1_clk[0]); + clk_set_parent(&ssi_ext2_clk, &ssi2_clk[0]); + + /* move usb_phy_clk to 24MHz */ + clk_set_parent(&usb_phy_clk[0], &osc_clk); + clk_set_parent(&usb_phy_clk[1], &osc_clk); + + /* move gpmi-nfc to 24MHz */ + clk_set_parent(&gpmi_nfc_clk[0], &osc_clk); + + /* set SDHC root clock as 200MHZ*/ + clk_set_rate(&esdhc1_clk[0], 200000000); + clk_set_rate(&esdhc3_clk[0], 200000000); + + /* Set the current working point. */ + cpu_wp_tbl = get_cpu_wp(&cpu_wp_nr); + /* Update the cpu working point table based on the PLL1 freq + * at boot time + */ + if (pll1_main_clk.rate <= cpu_wp_tbl[cpu_wp_nr - 1].cpu_rate) + wp_cnt = 1; + else if (pll1_main_clk.rate <= cpu_wp_tbl[1].cpu_rate && + pll1_main_clk.rate > cpu_wp_tbl[2].cpu_rate) + wp_cnt = cpu_wp_nr - 1; + else + wp_cnt = cpu_wp_nr; + + cpu_wp_tbl[0].cpu_rate = pll1_main_clk.rate; + + if (wp_cnt == 1) { + cpu_wp_tbl[0] = cpu_wp_tbl[cpu_wp_nr - 1]; + memset(&cpu_wp_tbl[cpu_wp_nr - 1], 0, sizeof(struct cpu_wp)); + memset(&cpu_wp_tbl[cpu_wp_nr - 2], 0, sizeof(struct cpu_wp)); + } else if (wp_cnt < cpu_wp_nr) { + for (i = 0; i < wp_cnt; i++) + cpu_wp_tbl[i] = cpu_wp_tbl[i+1]; + memset(&cpu_wp_tbl[i], 0, sizeof(struct cpu_wp)); + } + + if (wp_cnt < cpu_wp_nr) { + set_num_cpu_wp(wp_cnt); + cpu_wp_tbl = get_cpu_wp(&cpu_wp_nr); + } + + + for (j = 0; j < cpu_wp_nr; j++) { + /* Change the CPU podf divider based on the boot up + * pll1 rate. + */ + cpu_wp_tbl[j].cpu_podf = max( + (int)((pll1_main_clk.rate / cpu_wp_tbl[j].cpu_rate) + - 1), 0); + if (pll1_main_clk.rate/(cpu_wp_tbl[j].cpu_podf + 1) > + cpu_wp_tbl[j].cpu_rate) { + cpu_wp_tbl[j].cpu_podf++; + cpu_wp_tbl[j].cpu_rate = + pll1_main_clk.rate/ + (1000 * (cpu_wp_tbl[j].cpu_podf + 1)); + cpu_wp_tbl[j].cpu_rate *= 1000; + } + if (pll1_main_clk.rate/(cpu_wp_tbl[j].cpu_podf + 1) < + cpu_wp_tbl[j].cpu_rate) { + cpu_wp_tbl[j].cpu_rate = pll1_main_clk.rate; + } + cpu_wp_tbl[j].pll_rate = pll1_main_clk.rate; + } + /* Set the current working point. */ + for (i = 0; i < cpu_wp_nr; i++) { + if (clk_get_rate(&cpu_clk) == cpu_wp_tbl[i].cpu_rate) { + cpu_curr_wp = i; + break; + } + } + if (i > cpu_wp_nr) + BUG(); + + propagate_rate(&osc_clk); + propagate_rate(&pll1_sw_clk); + propagate_rate(&pll2_sw_clk); + propagate_rate(&pll3_sw_clk); + + clk_set_parent(&uart_main_clk, &lp_apm_clk); + clk_set_parent(&gpu2d_clk, &axi_b_clk); + + clk_set_parent(&weim_clk[0], &ahb_clk); + clk_set_rate(&weim_clk[0], clk_round_rate(&weim_clk[0], 130000000)); + + /* Do the following just to disable the PLL since its not used */ + clk_enable(&pll3_sw_clk); + clk_disable(&pll3_sw_clk); + + base = ioremap(MX53_BASE_ADDR(GPT1_BASE_ADDR), SZ_4K); + mxc_timer_init(&gpt_clk[0], base, MXC_INT_GPT); + return 0; +} + +/*! + * Setup cpu clock based on working point. + * @param wp cpu freq working point + * @return 0 on success or error code on failure. + */ +static int cpu_clk_set_wp(int wp) +{ + struct cpu_wp *p; + u32 reg; + + if (wp == cpu_curr_wp) + return 0; + + p = &cpu_wp_tbl[wp]; + + /* + * leave the PLL1 freq unchanged. + */ + reg = __raw_readl(MXC_CCM_CACRR); + reg &= ~MXC_CCM_CACRR_ARM_PODF_MASK; + reg |= cpu_wp_tbl[wp].cpu_podf << MXC_CCM_CACRR_ARM_PODF_OFFSET; + __raw_writel(reg, MXC_CCM_CACRR); + cpu_curr_wp = wp; + cpu_clk.rate = cpu_wp_tbl[wp].cpu_rate; + +#if defined(CONFIG_CPU_FREQ) + cpufreq_trig_needed = 1; +#endif + return 0; +} diff --git a/arch/arm/mach-mx5/displays/hdmi_ad9389.h b/arch/arm/mach-mx5/displays/hdmi_ad9389.h new file mode 100644 index 000000000000..2a29cd783b48 --- /dev/null +++ b/arch/arm/mach-mx5/displays/hdmi_ad9389.h @@ -0,0 +1,168 @@ +/* + * arch/arm/mach-mx5/displays/hdmi_ad9389.h + * + * Copyright (C) 2010 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_CCWMX51_DISPLAYS_HDMI_AD9389_H__ +#define __ASM_ARCH_MXC_CCWMX51_DISPLAYS_HDMI_AD9389_H__ + +static struct fb_videomode ad9389_1280x720x24 = { + .name = "1280x720", + .refresh = 60, + .xres = 1280, + .yres = 720, + .pixclock = 20100, + .left_margin = 32, + .right_margin = 48, + .upper_margin = 7, + .lower_margin = 3, + .hsync_len = 32, + .vsync_len = 6, +}; + +static struct fb_videomode ad9389_1360x768x24 = { + .name = "1360x768", + .refresh = 60, + .xres = 1360, + .yres = 768, + .pixclock = 16000, + .left_margin = 139, + .right_margin = 256, + .upper_margin = 3, + .lower_margin = 18, + .hsync_len = 76, + .vsync_len = 6, +}; + + +static struct fb_videomode ad9389_1366x768x24 = { + .name = "1366x768", + .refresh = 60, + .xres = 1366, + .yres = 768, + .pixclock = 16000, + .left_margin = 139, + .right_margin = 256, + .upper_margin = 3, + .lower_margin = 18, + .hsync_len = 76, + .vsync_len = 6, +}; + +static struct fb_videomode ad9389_1920x1080x24 = { + .name = "1920x1080", + .refresh = 60, + .xres = 1920, + .yres = 1080, + .pixclock = 7560, + .left_margin = 148, + .right_margin = 88, + .upper_margin = 36, + .lower_margin = 4, + .hsync_len = 44, + .vsync_len = 5, +}; + +static struct fb_videomode ad9389_1024x768x24 = { + .name = "1024x768", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15384, /* pico seconds of 65.0MHz */ + .left_margin = 160, + .right_margin = 24, + .upper_margin = 29, + .lower_margin = 3, + .hsync_len = 136, + .vsync_len = 6, +}; + +static struct fb_videomode ad9389_custom_1 = { + .name = "custom1", + .refresh = 0, + .xres = 0, + .yres = 0, + .pixclock = 0, + .left_margin = 0, + .right_margin = 0, + .upper_margin = 0, + .lower_margin = 0, + .hsync_len = 0, + .vsync_len = 0, + .sync = 0, +}; + +static struct fb_videomode ad9389_custom_2 = { + .name = "custom2", + .refresh = 0, + .xres = 0, + .yres = 0, + .pixclock = 0, + .left_margin = 0, + .right_margin = 0, + .upper_margin = 0, + .lower_margin = 0, + .hsync_len = 0, + .vsync_len = 0, + .sync = 0, +}; + +struct ccwmx51_lcd_pdata ad9389_panel_list[] = { + { + .fb_pdata = { + .interface_pix_fmt = VIDEO_PIX_FMT, + .mode_str = "1280x720", + .mode = &ad9389_1280x720x24, + }, + .bl_enable = NULL, + }, { + .fb_pdata = { + .interface_pix_fmt = VIDEO_PIX_FMT, + .mode_str = "1360x768", + .mode = &ad9389_1360x768x24, + }, + .bl_enable = NULL, + }, { + .fb_pdata = { + .interface_pix_fmt = VIDEO_PIX_FMT, + .mode_str = "1366x768", + .mode = &ad9389_1366x768x24, + }, + .bl_enable = NULL, + }, { + .fb_pdata = { + .interface_pix_fmt = VIDEO_PIX_FMT, + .mode_str = "1920x1080", + .mode = &ad9389_1920x1080x24, + }, + .bl_enable = NULL, + }, { + .fb_pdata = { + .interface_pix_fmt = VIDEO_PIX_FMT, + .mode_str = "1024x768", + .mode = &ad9389_1024x768x24, + }, + .bl_enable = NULL, + }, { + .fb_pdata = { + .interface_pix_fmt = VIDEO_PIX_FMT, + .mode_str = "custom1", + .mode = &ad9389_custom_1, + }, + .bl_enable = NULL, + }, { + .fb_pdata = { + .interface_pix_fmt = VIDEO_PIX_FMT, + .mode_str = "custom2", + .mode = &ad9389_custom_2, + }, + .bl_enable = NULL, + }, +}; +#endif /* __ASM_ARCH_MXC_CCWMX51_DISPLAYS_HDMI_AD9389_H__ */
\ No newline at end of file diff --git a/arch/arm/mach-mx5/displays/lcd.h b/arch/arm/mach-mx5/displays/lcd.h new file mode 100644 index 000000000000..f2af740ebf85 --- /dev/null +++ b/arch/arm/mach-mx5/displays/lcd.h @@ -0,0 +1,135 @@ +/* + * arch/arm/mach-mx5/displays/lcd.h + * + * Copyright (C) 2010 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_CCWMX51_DISPLAYS_LCD_H__ +#define __ASM_ARCH_MXC_CCWMX51_DISPLAYS_LCD_H__ + +#include "../iomux.h" + +#if defined (CONFIG_JSCCWMX51_V1) +#include "../drivers/mxc/ipu3/ipu_regs.h" + +/** + * This code is only valide to enable/disable the backlight of the second + * display, on the first version of the JumpStart Board (JSCCWMX51 RevA). + * Newer versions use a GPIO to enable the BL of the second display. + */ +void ipu_ccwmx51_disp1_enable(int enable) +{ + uint32_t tmp; + + tmp = __raw_readl(DI_GENERAL(1)); + tmp &= ~DI_GEN_POLARITY_4; + if (enable) + tmp |= DI_GEN_POLARITY_4; + __raw_writel(tmp, DI_GENERAL(1)); +} +#endif + +static void lcd_bl_enable_lq70(int enable, int vif) +{ + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_DI1_PIN11), !enable); + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_DI1_PIN12), !enable); + if (vif == 0) + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_DI1_PIN11), !enable); + else if (vif == 1) +#ifdef CONFIG_JSCCWMX51_V1 + ipu_ccwmx51_disp1_enable(enable); +#elif defined(CONFIG_JSCCWMX51_V2) + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_DI1_PIN12), !enable); +#else +#error "A function to enable/disalbe the display have to be specified" +#endif +} + +static void lcd_init(int vif) +{ + /* Initialize lcd enable gpio and video interface lines */ + gpio_video_active(vif, PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); +} + +static struct fb_videomode lq70y3dg3b = { + .name = "LQ070Y3DG3B", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 44000, + .left_margin = 0, + .right_margin = 50, + .upper_margin = 25, + .lower_margin = 10, + .hsync_len = 128, + .vsync_len = 10, + .vmode = FB_VMODE_NONINTERLACED, + .sync = FB_SYNC_EXT, + .flag = 0, +}; + +static struct fb_videomode lcd_custom_1 = { + .name = "custom1", + .refresh = 0, + .xres = 0, + .yres = 0, + .pixclock = 0, + .left_margin = 0, + .right_margin = 0, + .upper_margin = 0, + .lower_margin = 0, + .hsync_len = 0, + .vsync_len = 0, + .vmode = FB_VMODE_NONINTERLACED, + .sync = FB_SYNC_EXT, +}; + +static struct fb_videomode lcd_custom_2 = { + .name = "custom2", + .refresh = 0, + .xres = 0, + .yres = 0, + .pixclock = 0, + .left_margin = 0, + .right_margin = 0, + .upper_margin = 0, + .lower_margin = 0, + .hsync_len = 0, + .vsync_len = 0, + .vmode = FB_VMODE_NONINTERLACED, + .sync = FB_SYNC_EXT, +}; + +struct ccwmx51_lcd_pdata lcd_panel_list[] = { + { + .fb_pdata = { + .interface_pix_fmt = VIDEO_PIX_FMT, + .mode_str = "LQ070Y3DG3B", + .mode = &lq70y3dg3b, + }, + .bl_enable = lcd_bl_enable_lq70, + .init = &lcd_init, + }, { + .fb_pdata = { + .interface_pix_fmt = VIDEO_PIX_FMT, + .mode_str = "custom1", + .mode = &lcd_custom_1, + }, + .bl_enable = NULL, + .init = &lcd_init, + }, { + .fb_pdata = { + .interface_pix_fmt = VIDEO_PIX_FMT, + .mode_str = "custom2", + .mode = &lcd_custom_2, + }, + .bl_enable = NULL, + .init = &lcd_init, + }, +}; +#endif /* __ASM_ARCH_MXC_CCWMX51_DISPLAYS_LCD_H__ */ diff --git a/arch/arm/mach-mx5/displays/vga.h b/arch/arm/mach-mx5/displays/vga.h new file mode 100644 index 000000000000..3e5a913c643a --- /dev/null +++ b/arch/arm/mach-mx5/displays/vga.h @@ -0,0 +1,64 @@ +/* + * arch/arm/mach-mx5/displays/vga.h + * + * Copyright (C) 2010 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_CCWMX51_DISPLAYS_VGA_H__ +#define __ASM_ARCH_MXC_CCWMX51_DISPLAYS_VGA_H__ + +static struct fb_videomode vga_custom_1 = { + .name = "custom1", + .refresh = 0, + .xres = 0, + .yres = 0, + .pixclock = 0, + .left_margin = 0, + .right_margin = 0, + .upper_margin = 0, + .lower_margin = 0, + .hsync_len = 0, + .vsync_len = 0, + .vmode = FB_VMODE_NONINTERLACED, + .sync = FB_SYNC_EXT, +}; + +static struct fb_videomode vga_custom_2 = { + .name = "custom1", + .refresh = 0, + .xres = 0, + .yres = 0, + .pixclock = 0, + .left_margin = 0, + .right_margin = 0, + .upper_margin = 0, + .lower_margin = 0, + .hsync_len = 0, + .vsync_len = 0, + .vmode = FB_VMODE_NONINTERLACED, + .sync = FB_SYNC_EXT, +}; + +struct ccwmx51_lcd_pdata vga_panel_list[] = { + { + .fb_pdata = { + .interface_pix_fmt = VIDEO_PIX_FMT, + .mode_str = "custom1", + .mode = &vga_custom_1, + }, + .bl_enable = NULL, + }, { + .fb_pdata = { + .interface_pix_fmt = VIDEO_PIX_FMT, + .mode_str = "custom2", + .mode = &vga_custom_2, + }, + .bl_enable = NULL, + }, +}; +#endif /* __ASM_ARCH_MXC_CCWMX51_DISPLAYS_VGA_H__ */
\ No newline at end of file diff --git a/arch/arm/mach-mx5/dma-apbh.c b/arch/arm/mach-mx5/dma-apbh.c new file mode 100644 index 000000000000..d61756135667 --- /dev/null +++ b/arch/arm/mach-mx5/dma-apbh.c @@ -0,0 +1,225 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/list.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/dmapool.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/mxc.h> +#include <mach/dmaengine.h> + +#include "regs-apbh.h" + +#ifndef BM_APBH_CTRL0_APB_BURST_EN +#define BM_APBH_CTRL0_APB_BURST_EN BM_APBH_CTRL0_APB_BURST4_EN +#endif + +static int mxs_dma_apbh_enable(struct mxs_dma_chan *pchan, unsigned int chan) +{ + unsigned int sem; + struct mxs_dma_device *pdev = pchan->dma; + struct mxs_dma_desc *pdesc; + + pdesc = list_first_entry(&pchan->active, struct mxs_dma_desc, node); + if (pdesc == NULL) + return -EFAULT; + + sem = __raw_readl(pdev->base + HW_APBH_CHn_SEMA(chan)); + sem = (sem & BM_APBH_CHn_SEMA_PHORE) >> BP_APBH_CHn_SEMA_PHORE; + if (pchan->flags & MXS_DMA_FLAGS_BUSY) { + + if (pdesc->cmd.cmd.bits.chain == 0) + return 0; + if (sem < 2) { + if (!sem) + return 0; + pdesc = list_entry(pdesc->node.next, + struct mxs_dma_desc, node); + __raw_writel(mxs_dma_cmd_address(pdesc), + pdev->base + HW_APBH_CHn_NXTCMDAR(chan)); + } + sem = pchan->pending_num; + pchan->pending_num = 0; + __raw_writel(BF_APBH_CHn_SEMA_INCREMENT_SEMA(sem), + pdev->base + HW_APBH_CHn_SEMA(chan)); + pchan->active_num += sem; + return 0; + } + + pchan->active_num += pchan->pending_num; + pchan->pending_num = 0; + __raw_writel(mxs_dma_cmd_address(pdesc), + pdev->base + HW_APBH_CHn_NXTCMDAR(chan)); + __raw_writel(pchan->active_num, pdev->base + HW_APBH_CHn_SEMA(chan)); + __raw_writel(1 << chan, pdev->base + HW_APBH_CTRL0_CLR); + return 0; +} + +static void mxs_dma_apbh_disable(struct mxs_dma_chan *pchan, unsigned int chan) +{ + struct mxs_dma_device *pdev = pchan->dma; + __raw_writel(1 << (chan + BP_APBH_CTRL0_CLKGATE_CHANNEL), + pdev->base + HW_APBH_CTRL0_SET); +} + +static void mxs_dma_apbh_reset(struct mxs_dma_device *pdev, unsigned int chan) +{ + __raw_writel(1 << (chan + BP_APBH_CHANNEL_CTRL_RESET_CHANNEL), + pdev->base + HW_APBH_CHANNEL_CTRL_SET); +} + +static void mxs_dma_apbh_freeze(struct mxs_dma_device *pdev, unsigned int chan) +{ + __raw_writel(1 << chan, pdev->base + HW_APBH_CHANNEL_CTRL_SET); +} + +static void +mxs_dma_apbh_unfreeze(struct mxs_dma_device *pdev, unsigned int chan) +{ + __raw_writel(1 << chan, pdev->base + HW_APBH_CHANNEL_CTRL_CLR); +} + +static void mxs_dma_apbh_info(struct mxs_dma_device *pdev, + unsigned int chan, struct mxs_dma_info *info) +{ + unsigned int reg; + reg = __raw_readl(pdev->base + HW_APBH_CTRL2); + info->status = reg >> chan; + info->buf_addr = __raw_readl(pdev->base + HW_APBH_CHn_BAR(chan)); +} + +static int +mxs_dma_apbh_read_semaphore(struct mxs_dma_device *pdev, unsigned int chan) +{ + unsigned int reg; + reg = __raw_readl(pdev->base + HW_APBH_CHn_SEMA(chan)); + return (reg & BM_APBH_CHn_SEMA_PHORE) >> BP_APBH_CHn_SEMA_PHORE; +} + +static void +mxs_dma_apbh_enable_irq(struct mxs_dma_device *pdev, + unsigned int chan, int enable) +{ + if (enable) + __raw_writel(1 << (chan + 16), pdev->base + HW_APBH_CTRL1_SET); + else + __raw_writel(1 << (chan + 16), pdev->base + HW_APBH_CTRL1_CLR); + +} + +static int +mxs_dma_apbh_irq_is_pending(struct mxs_dma_device *pdev, unsigned int chan) +{ + unsigned int reg; + reg = __raw_readl(pdev->base + HW_APBH_CTRL1); + reg |= __raw_readl(pdev->base + HW_APBH_CTRL2); + return reg & (1 << chan); +} + +static void mxs_dma_apbh_ack_irq(struct mxs_dma_device *pdev, unsigned int chan) +{ + __raw_writel(1 << chan, pdev->base + HW_APBH_CTRL1_CLR); + __raw_writel(1 << chan, pdev->base + HW_APBH_CTRL2_CLR); +} + +static struct mxs_dma_device mxs_dma_apbh = { + .name = "mxs-dma-apbh", + .enable = mxs_dma_apbh_enable, + .disable = mxs_dma_apbh_disable, + .reset = mxs_dma_apbh_reset, + .freeze = mxs_dma_apbh_freeze, + .unfreeze = mxs_dma_apbh_unfreeze, + .info = mxs_dma_apbh_info, + .read_semaphore = mxs_dma_apbh_read_semaphore, + .enable_irq = mxs_dma_apbh_enable_irq, + .irq_is_pending = mxs_dma_apbh_irq_is_pending, + .ack_irq = mxs_dma_apbh_ack_irq, +}; + +static int __devinit dma_apbh_probe(struct platform_device *pdev) +{ + int i; + struct resource *res; + struct mxs_dma_plat_data *plat; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENOMEM; + mxs_dma_apbh.base = ioremap(res->start, res->end); + __raw_writel(BM_APBH_CTRL0_SFTRST, + mxs_dma_apbh.base + HW_APBH_CTRL0_CLR); + for (i = 0; i < 10000; i++) { + if (!(__raw_readl(mxs_dma_apbh.base + HW_APBH_CTRL0_CLR) & + BM_APBH_CTRL0_SFTRST)) + break; + udelay(2); + } + if (i >= 10000) + return -ETIME; + __raw_writel(BM_APBH_CTRL0_CLKGATE, + mxs_dma_apbh.base + HW_APBH_CTRL0_CLR); + + plat = (struct mxs_dma_plat_data *)pdev->dev.platform_data; + if (!plat) + return -ENODEV; + if (plat->burst8) + __raw_writel(BM_APBH_CTRL0_AHB_BURST8_EN, + mxs_dma_apbh.base + HW_APBH_CTRL0_SET); + else + __raw_writel(BM_APBH_CTRL0_AHB_BURST8_EN, + mxs_dma_apbh.base + HW_APBH_CTRL0_CLR); + + if (plat->burst) + __raw_writel(BM_APBH_CTRL0_APB_BURST_EN, + mxs_dma_apbh.base + HW_APBH_CTRL0_SET); + else + __raw_writel(BM_APBH_CTRL0_APB_BURST_EN, + mxs_dma_apbh.base + HW_APBH_CTRL0_CLR); + + mxs_dma_apbh.pdev = pdev; + mxs_dma_apbh.chan_base = plat->chan_base; + mxs_dma_apbh.chan_num = plat->chan_num; + platform_set_drvdata(pdev, &mxs_dma_apbh); + return mxs_dma_device_register(&mxs_dma_apbh); +} + +static int __devexit dma_apbh_remove(struct platform_device *pdev) +{ + iounmap(mxs_dma_apbh.base); + return 0; +} + +static struct platform_driver dma_apbh_driver = { + .probe = dma_apbh_probe, + .remove = __devexit_p(dma_apbh_remove), + .driver = { + .name = "mxs-dma-apbh"}, +}; + +static int __init mxs_dma_apbh_init(void) +{ + return platform_driver_register(&dma_apbh_driver); +} + +fs_initcall(mxs_dma_apbh_init); diff --git a/arch/arm/mach-mx5/dma-apbh.h b/arch/arm/mach-mx5/dma-apbh.h new file mode 100644 index 000000000000..9d8d1de53ecf --- /dev/null +++ b/arch/arm/mach-mx5/dma-apbh.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __ASM_ARCH_MACH_DMA_H__ +#define __ASM_ARCH_MACH_DMA_H__ + +enum { + MXS_DMA_CHANNEL_AHB_APBH = 0, + MXS_DMA_CHANNEL_AHB_APBH_GPMI0 = MXS_DMA_CHANNEL_AHB_APBH, + MXS_DMA_CHANNEL_AHB_APBH_GPMI1, + MXS_DMA_CHANNEL_AHB_APBH_GPMI2, + MXS_DMA_CHANNEL_AHB_APBH_GPMI3, + MXS_DMA_CHANNEL_AHB_APBH_GPMI4, + MXS_DMA_CHANNEL_AHB_APBH_GPMI5, + MXS_DMA_CHANNEL_AHB_APBH_GPMI6, + MXS_DMA_CHANNEL_AHB_APBH_GPMI7, + MXS_DMA_CHANNEL_AHB_APBH_SSP, + MXS_MAX_DMA_CHANNELS, +}; +#endif diff --git a/arch/arm/mach-mx5/dmaengine.c b/arch/arm/mach-mx5/dmaengine.c new file mode 100644 index 000000000000..b8aad6c0b73f --- /dev/null +++ b/arch/arm/mach-mx5/dmaengine.c @@ -0,0 +1,641 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/list.h> +#include <linux/device.h> +#include <linux/dmapool.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <mach/dmaengine.h> + +#include "dma-apbh.h" + +static void *mxs_dma_pool; +static int mxs_dma_alignment = MXS_DMA_ALIGNMENT; + +/* + * The mutex that arbitrates access to the array of structures that represent + * all the DMA channels in the system (see mxs_dma_channels, below). + */ + +static DEFINE_MUTEX(mxs_dma_mutex); + +/* + * The list of DMA drivers that manage various DMA channels. A DMA device + * driver registers to manage DMA channels by calling mxs_dma_device_register(). + */ + +static LIST_HEAD(mxs_dma_devices); + +/* + * The array of struct mxs_dma_chan that represent every DMA channel in the + * system. The index of the structure in the array indicates the specific DMA + * hardware it represents (see mach-mx28/include/mach/dma.h). + */ + +static struct mxs_dma_chan mxs_dma_channels[MXS_MAX_DMA_CHANNELS]; + +int mxs_dma_request(int channel, struct device *dev, const char *name) +{ + int ret = 0; + struct mxs_dma_chan *pchan; + + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return -EINVAL; + + if (!dev || !name) + return -EINVAL; + pchan = mxs_dma_channels + channel; + mutex_lock(&mxs_dma_mutex); + if ((pchan->flags & MXS_DMA_FLAGS_VALID) != MXS_DMA_FLAGS_VALID) { + ret = -ENODEV; + goto out; + } + if (pchan->flags & MXS_DMA_FLAGS_ALLOCATED) { + ret = -EBUSY; + goto out; + } + pchan->flags |= MXS_DMA_FLAGS_ALLOCATED; + pchan->name = name; + pchan->dev = (unsigned long)dev; + pchan->active_num = 0; + pchan->pending_num = 0; + spin_lock_init(&pchan->lock); + INIT_LIST_HEAD(&pchan->active); + INIT_LIST_HEAD(&pchan->done); +out: + mutex_unlock(&mxs_dma_mutex); + return ret; +} +EXPORT_SYMBOL(mxs_dma_request); + +void mxs_dma_release(int channel, struct device *dev) +{ + struct mxs_dma_chan *pchan; + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return; + pchan = mxs_dma_channels + channel; + + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return; + + if (pchan->flags & MXS_DMA_FLAGS_BUSY) + return; + + if (pchan->dev != (unsigned long)dev) + return; + + mutex_lock(&mxs_dma_mutex); + pchan->dev = 0; + pchan->active_num = 0; + pchan->pending_num = 0; + pchan->flags &= ~MXS_DMA_FLAGS_ALLOCATED; + mutex_unlock(&mxs_dma_mutex); +} +EXPORT_SYMBOL(mxs_dma_release); + +int mxs_dma_enable(int channel) +{ + int ret = 0; + unsigned long flags; + struct mxs_dma_chan *pchan; + struct mxs_dma_device *pdma; + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return -EINVAL; + pchan = mxs_dma_channels + channel; + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return -EINVAL; + + pdma = pchan->dma; + mutex_lock(&mxs_dma_mutex); + spin_lock_irqsave(&pchan->lock, flags); + if (pchan->pending_num && pdma->enable) + ret = pdma->enable(pchan, channel - pdma->chan_base); + pchan->flags |= MXS_DMA_FLAGS_BUSY; + spin_unlock_irqrestore(&pchan->lock, flags); + mutex_unlock(&mxs_dma_mutex); + return ret; +} +EXPORT_SYMBOL(mxs_dma_enable); + +void mxs_dma_disable(int channel) +{ + unsigned long flags; + struct mxs_dma_chan *pchan; + struct mxs_dma_device *pdma; + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return; + pchan = mxs_dma_channels + channel; + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return; + if (!(pchan->flags & MXS_DMA_FLAGS_BUSY)) + return; + pdma = pchan->dma; + mutex_lock(&mxs_dma_mutex); + spin_lock_irqsave(&pchan->lock, flags); + if (pdma->disable) + pdma->disable(pchan, channel - pdma->chan_base); + pchan->flags &= ~MXS_DMA_FLAGS_BUSY; + pchan->active_num = 0; + pchan->pending_num = 0; + list_splice_init(&pchan->active, &pchan->done); + spin_unlock_irqrestore(&pchan->lock, flags); + mutex_unlock(&mxs_dma_mutex); +} +EXPORT_SYMBOL(mxs_dma_disable); + +int mxs_dma_get_info(int channel, struct mxs_dma_info *info) +{ + struct mxs_dma_chan *pchan; + struct mxs_dma_device *pdma; + + if (!info) + return -EINVAL; + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return -EINVAL; + pchan = mxs_dma_channels + channel; + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return -EFAULT; + pdma = pchan->dma; + if (pdma->info) + pdma->info(pdma, channel - pdma->chan_base, info); + return 0; +} +EXPORT_SYMBOL(mxs_dma_get_info); + +int mxs_dma_cooked(int channel, struct list_head *head) +{ + int sem; + unsigned long flags; + struct mxs_dma_chan *pchan; + struct list_head *p, *q; + struct mxs_dma_desc *pdesc; + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return -EINVAL; + pchan = mxs_dma_channels + channel; + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return -EINVAL; + + sem = mxs_dma_read_semaphore(channel); + if (sem < 0) + return sem; + if (sem == pchan->active_num) + return 0; + BUG_ON(sem > pchan->active_num); + spin_lock_irqsave(&pchan->lock, flags); + list_for_each_safe(p, q, &pchan->active) { + if ((pchan->active_num) <= sem) + break; + pdesc = list_entry(p, struct mxs_dma_desc, node); + pdesc->flags &= ~MXS_DMA_DESC_READY; + if (head) + list_move_tail(p, head); + else + list_move_tail(p, &pchan->done); + if (pdesc->flags & MXS_DMA_DESC_LAST) + pchan->active_num--; + } + if (sem == 0) + pchan->flags &= ~MXS_DMA_FLAGS_BUSY; + spin_unlock_irqrestore(&pchan->lock, flags); + + BUG_ON(sem != pchan->active_num); + return 0; +} +EXPORT_SYMBOL(mxs_dma_cooked); + +void mxs_dma_reset(int channel) +{ + unsigned long flags; + struct mxs_dma_chan *pchan; + struct mxs_dma_device *pdma; + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return; + pchan = mxs_dma_channels + channel; + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return; + pdma = pchan->dma; + spin_lock_irqsave(&pchan->lock, flags); + if (pdma->reset) + pdma->reset(pdma, channel - pdma->chan_base); + spin_unlock_irqrestore(&pchan->lock, flags); +} +EXPORT_SYMBOL(mxs_dma_reset); + +void mxs_dma_freeze(int channel) +{ + unsigned long flags; + struct mxs_dma_chan *pchan; + struct mxs_dma_device *pdma; + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return; + pchan = mxs_dma_channels + channel; + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return; + pdma = pchan->dma; + spin_lock_irqsave(&pchan->lock, flags); + if (pdma->freeze) + pdma->freeze(pdma, channel - pdma->chan_base); + spin_unlock_irqrestore(&pchan->lock, flags); +} +EXPORT_SYMBOL(mxs_dma_freeze); + +void mxs_dma_unfreeze(int channel) +{ + unsigned long flags; + struct mxs_dma_chan *pchan; + struct mxs_dma_device *pdma; + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return; + pchan = mxs_dma_channels + channel; + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return; + pdma = pchan->dma; + spin_lock_irqsave(&pchan->lock, flags); + if (pdma->unfreeze) + pdma->unfreeze(pdma, channel - pdma->chan_base); + spin_unlock_irqrestore(&pchan->lock, flags); +} +EXPORT_SYMBOL(mxs_dma_unfreeze); + +int mxs_dma_read_semaphore(int channel) +{ + int ret = -EINVAL; + unsigned long flags; + struct mxs_dma_chan *pchan; + struct mxs_dma_device *pdma; + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return ret; + pchan = mxs_dma_channels + channel; + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return ret; + pdma = pchan->dma; + spin_lock_irqsave(&pchan->lock, flags); + if (pdma->read_semaphore) + ret = pdma->read_semaphore(pdma, channel - pdma->chan_base); + spin_unlock_irqrestore(&pchan->lock, flags); + return ret; +} +EXPORT_SYMBOL(mxs_dma_read_semaphore); + +void mxs_dma_enable_irq(int channel, int en) +{ + unsigned long flags; + struct mxs_dma_chan *pchan; + struct mxs_dma_device *pdma; + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return; + pchan = mxs_dma_channels + channel; + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return; + pdma = pchan->dma; + spin_lock_irqsave(&pchan->lock, flags); + if (pdma->enable_irq) + pdma->enable_irq(pdma, channel - pdma->chan_base, en); + spin_unlock_irqrestore(&pchan->lock, flags); +} +EXPORT_SYMBOL(mxs_dma_enable_irq); + +int mxs_dma_irq_is_pending(int channel) +{ + int ret = 0; + unsigned long flags; + struct mxs_dma_chan *pchan; + struct mxs_dma_device *pdma; + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return ret; + pchan = mxs_dma_channels + channel; + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return ret; + pdma = pchan->dma; + spin_lock_irqsave(&pchan->lock, flags); + if (pdma->irq_is_pending) + ret = pdma->irq_is_pending(pdma, channel - pdma->chan_base); + spin_unlock_irqrestore(&pchan->lock, flags); + return ret; +} +EXPORT_SYMBOL(mxs_dma_irq_is_pending); + +void mxs_dma_ack_irq(int channel) +{ + unsigned long flags; + struct mxs_dma_chan *pchan; + struct mxs_dma_device *pdma; + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return; + pchan = mxs_dma_channels + channel; + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return; + pdma = pchan->dma; + spin_lock_irqsave(&pchan->lock, flags); + if (pdma->ack_irq) + pdma->ack_irq(pdma, channel - pdma->chan_base); + spin_unlock_irqrestore(&pchan->lock, flags); +} +EXPORT_SYMBOL(mxs_dma_ack_irq); + +void mxs_dma_set_target(int channel, int target) +{ + unsigned long flags; + struct mxs_dma_chan *pchan; + struct mxs_dma_device *pdma; + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return; + pchan = mxs_dma_channels + channel; + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return; + if (pchan->flags & MXS_DMA_FLAGS_BUSY) + return; + pdma = pchan->dma; + spin_lock_irqsave(&pchan->lock, flags); + if (pdma->set_target) + pdma->set_target(pdma, channel - pdma->chan_base, target); + spin_unlock_irqrestore(&pchan->lock, flags); +} +EXPORT_SYMBOL(mxs_dma_set_target); + +/* mxs dma utility function */ +struct mxs_dma_desc *mxs_dma_alloc_desc(void) +{ + struct mxs_dma_desc *pdesc; + unsigned int address; + if (mxs_dma_pool == NULL) + return NULL; + + pdesc = dma_pool_alloc(mxs_dma_pool, GFP_KERNEL, &address); + if (pdesc == NULL) + return NULL; + memset(pdesc, 0, sizeof(*pdesc)); + pdesc->address = address; + return pdesc; +}; +EXPORT_SYMBOL(mxs_dma_alloc_desc); + +void mxs_dma_free_desc(struct mxs_dma_desc *pdesc) +{ + if (pdesc == NULL) + return; + + if (mxs_dma_pool == NULL) + return; + + dma_pool_free(mxs_dma_pool, pdesc, pdesc->address); +} +EXPORT_SYMBOL(mxs_dma_free_desc); + +int mxs_dma_desc_append(int channel, struct mxs_dma_desc *pdesc) +{ + int ret = 0; + unsigned long flags; + struct mxs_dma_chan *pchan; + struct mxs_dma_desc *last; + struct mxs_dma_device *pdma; + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return -EINVAL; + pchan = mxs_dma_channels + channel; + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return -EINVAL; + pdma = pchan->dma; + pdesc->cmd.next = mxs_dma_cmd_address(pdesc); + pdesc->flags |= MXS_DMA_DESC_FIRST | MXS_DMA_DESC_LAST; + spin_lock_irqsave(&pchan->lock, flags); + if (!list_empty(&pchan->active)) { + + last = list_entry(pchan->active.prev, + struct mxs_dma_desc, node); + + pdesc->flags &= ~MXS_DMA_DESC_FIRST; + last->flags &= ~MXS_DMA_DESC_LAST; + + last->cmd.next = mxs_dma_cmd_address(pdesc); + last->cmd.cmd.bits.chain = 1; + } + pdesc->flags |= MXS_DMA_DESC_READY; + if (pdesc->flags & MXS_DMA_DESC_FIRST) + pchan->pending_num++; + list_add_tail(&pdesc->node, &pchan->active); +out: + spin_unlock_irqrestore(&pchan->lock, flags); + return ret; +} +EXPORT_SYMBOL(mxs_dma_desc_append); + +int mxs_dma_desc_add_list(int channel, struct list_head *head) +{ + int ret = 0, size = 0; + unsigned long flags; + struct mxs_dma_chan *pchan; + struct mxs_dma_device *pdma; + struct list_head *p; + struct mxs_dma_desc *prev = NULL, *pcur; + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return -EINVAL; + pchan = mxs_dma_channels + channel; + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return -EINVAL; + + if (list_empty(head)) + return 0; + + pdma = pchan->dma; + list_for_each(p, head) { + pcur = list_entry(p, struct mxs_dma_desc, node); + if (!(pcur->cmd.cmd.bits.dec_sem || pcur->cmd.cmd.bits.chain)) + return -EINVAL; + if (prev) + prev->cmd.next = mxs_dma_cmd_address(pcur); + else + pcur->flags |= MXS_DMA_DESC_FIRST; + pcur->flags |= MXS_DMA_DESC_READY; + prev = pcur; + size++; + } + pcur = list_first_entry(head, struct mxs_dma_desc, node); + prev->cmd.next = mxs_dma_cmd_address(pcur); + prev->flags |= MXS_DMA_DESC_LAST; + + spin_lock_irqsave(&pchan->lock, flags); + if (!list_empty(&pchan->active)) { + pcur = list_entry(pchan->active.next, + struct mxs_dma_desc, node); + if (pcur->cmd.cmd.bits.dec_sem != prev->cmd.cmd.bits.dec_sem) { + ret = -EFAULT; + goto out; + } + prev->cmd.next = mxs_dma_cmd_address(pcur); + prev = list_entry(pchan->active.prev, + struct mxs_dma_desc, node); + pcur = list_first_entry(head, struct mxs_dma_desc, node); + pcur->flags &= ~MXS_DMA_DESC_FIRST; + prev->flags &= ~MXS_DMA_DESC_LAST; + prev->cmd.next = mxs_dma_cmd_address(pcur); + } + list_splice(head, &pchan->active); + pchan->pending_num += size; + if (!(pcur->cmd.cmd.bits.dec_sem) && (pcur->flags & MXS_DMA_DESC_FIRST)) + pchan->pending_num += 1; + else + pchan->pending_num += size; +out: + spin_unlock_irqrestore(&pchan->lock, flags); + return ret; +} +EXPORT_SYMBOL(mxs_dma_desc_add_list); + +int mxs_dma_get_cooked(int channel, struct list_head *head) +{ + unsigned long flags; + struct mxs_dma_chan *pchan; + if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS)) + return -EINVAL; + pchan = mxs_dma_channels + channel; + if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED)) + return -EINVAL; + + if (head == NULL) + return 0; + + spin_lock_irqsave(&pchan->lock, flags); + list_splice(&pchan->done, head); + spin_unlock_irqrestore(&pchan->lock, flags); + return 0; +} +EXPORT_SYMBOL(mxs_dma_get_cooked); + +int mxs_dma_device_register(struct mxs_dma_device *pdev) +{ + int i; + struct mxs_dma_chan *pchan; + + if (pdev == NULL || !pdev->chan_num) + return -EINVAL; + + if ((pdev->chan_base >= MXS_MAX_DMA_CHANNELS) || + ((pdev->chan_base + pdev->chan_num) > MXS_MAX_DMA_CHANNELS)) + return -EINVAL; + + mutex_lock(&mxs_dma_mutex); + pchan = mxs_dma_channels + pdev->chan_base; + for (i = 0; i < pdev->chan_num; i++, pchan++) { + pchan->dma = pdev; + pchan->flags = MXS_DMA_FLAGS_VALID; + } + list_add(&pdev->node, &mxs_dma_devices); + mutex_unlock(&mxs_dma_mutex); + return 0; +} +EXPORT_SYMBOL(mxs_dma_device_register); + +static int __init mxs_dma_alignment_setup(char *line) +{ + get_option(&line, &mxs_dma_alignment); + mxs_dma_alignment = (mxs_dma_alignment + 3) & (~3); + mxs_dma_alignment = max(mxs_dma_alignment, MXS_DMA_ALIGNMENT); + return 1; +}; + +__setup("mxs-dma-alignment=", mxs_dma_alignment_setup); + +static int mxs_dmaengine_init(void) +{ + mxs_dma_pool = dma_pool_create("mxs_dma", NULL, + sizeof(struct mxs_dma_desc), + mxs_dma_alignment, PAGE_SIZE); + if (mxs_dma_pool == NULL) + return -ENOMEM; + return 0; +} + +subsys_initcall(mxs_dmaengine_init); + +#ifdef CONFIG_PROC_FS + +static void *mxs_dma_proc_seq_start(struct seq_file *file, loff_t * index) +{ + if (*index >= MXS_MAX_DMA_CHANNELS) + return NULL; + return mxs_dma_channels + *index; +} + +static void *mxs_dma_proc_seq_next(struct seq_file *file, void *data, + loff_t *index) +{ + if (data == NULL) + return NULL; + + if (*index >= MXS_MAX_DMA_CHANNELS) + return NULL; + + return mxs_dma_channels + (*index)++; +} + +static void mxs_dma_proc_seq_stop(struct seq_file *file, void *data) +{ +} + +static int mxs_dma_proc_seq_show(struct seq_file *file, void *data) +{ + int result; + struct mxs_dma_chan *pchan = (struct mxs_dma_chan *)data; + struct mxs_dma_device *pdev = pchan->dma; + result = seq_printf(file, "%s-channel%-d (%s)\n", + pdev->name, + pchan - mxs_dma_channels, + pchan->name ? pchan->name : "idle"); + return result; +} + +static const struct seq_operations mxc_dma_proc_seq_ops = { + .start = mxs_dma_proc_seq_start, + .next = mxs_dma_proc_seq_next, + .stop = mxs_dma_proc_seq_stop, + .show = mxs_dma_proc_seq_show +}; + +static int mxs_dma_proc_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &mxc_dma_proc_seq_ops); +} + +static const struct file_operations mxs_dma_proc_info_ops = { + .open = mxs_dma_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static int __init mxs_dmaengine_info_init(void) +{ + struct proc_dir_entry *res; + res = create_proc_entry("dma-engine", 0, NULL); + if (!res) { + printk(KERN_ERR "Failed to create dma info file \n"); + return -ENOMEM; + } + res->proc_fops = &mxs_dma_proc_info_ops; + return 0; +} + +late_initcall(mxs_dmaengine_info_init); +#endif diff --git a/arch/arm/mach-mx5/early_setup.c b/arch/arm/mach-mx5/early_setup.c new file mode 100644 index 000000000000..dd731d7f822e --- /dev/null +++ b/arch/arm/mach-mx5/early_setup.c @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/init.h> +#include <linux/string.h> + +int __initdata primary_di = { 0 }; +static int __init di_setup(char *__unused) +{ + primary_di = 1; + return 1; +} +__setup("di1_primary", di_setup); + diff --git a/arch/arm/mach-mx5/mx50_arm2.c b/arch/arm/mach-mx5/mx50_arm2.c new file mode 100644 index 000000000000..13de0971ace4 --- /dev/null +++ b/arch/arm/mach-mx5/mx50_arm2.c @@ -0,0 +1,1278 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/nodemask.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/fsl_devices.h> +#include <linux/spi/spi.h> +#include <linux/i2c.h> +#include <linux/ata.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> +#include <linux/regulator/consumer.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/max17135.h> +#include <linux/pmic_external.h> +#include <linux/pmic_status.h> +#include <linux/videodev2.h> +#include <linux/mxcfb.h> +#include <linux/fec.h> +#include <linux/gpmi-nfc.h> +#include <linux/android_pmem.h> +#include <linux/usb/android.h> +#include <asm/irq.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/flash.h> +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/memory.h> +#include <mach/gpio.h> +#include <mach/mmc.h> +#include <mach/mxc_dvfs.h> +#include <mach/iomux-mx50.h> + +#include "devices.h" +#include "crm_regs.h" +#include "usb.h" +#include "dma-apbh.h" + +#define SD1_WP (3*32 + 19) /*GPIO_4_19 */ +#define SD1_CD (0*32 + 27) /*GPIO_1_27 */ +#define SD2_WP (4*32 + 16) /*GPIO_5_16 */ +#define SD2_CD (4*32 + 17) /*GPIO_5_17 */ +#define SD3_WP (4*32 + 28) /*GPIO_5_28 */ +#define SD3_CD (3*32 + 4) /*GPIO_4_4 */ +#define HP_DETECT (3*32 + 15) /*GPIO_4_15 */ +#define PWR_INT (3*32 + 18) /*GPIO_4_18 */ + +#define EPDC_D0 (2*32 + 1) /*GPIO_3_0 */ +#define EPDC_D1 (2*32 + 2) /*GPIO_3_1 */ +#define EPDC_D2 (2*32 + 3) /*GPIO_3_2 */ +#define EPDC_D3 (2*32 + 4) /*GPIO_3_3 */ +#define EPDC_D4 (2*32 + 5) /*GPIO_3_4 */ +#define EPDC_D5 (2*32 + 6) /*GPIO_3_5 */ +#define EPDC_D6 (2*32 + 7) /*GPIO_3_6 */ +#define EPDC_D7 (2*32 + 8) /*GPIO_3_7 */ +#define EPDC_GDCLK (2*32 + 16) /*GPIO_3_16 */ +#define EPDC_GDSP (2*32 + 17) /*GPIO_3_17 */ +#define EPDC_GDOE (2*32 + 18) /*GPIO_3_18 */ +#define EPDC_GDRL (2*32 + 19) /*GPIO_3_19 */ +#define EPDC_SDCLK (2*32 + 20) /*GPIO_3_20 */ +#define EPDC_SDOE (2*32 + 23) /*GPIO_3_23 */ +#define EPDC_SDLE (2*32 + 24) /*GPIO_3_24 */ +#define EPDC_SDSHR (2*32 + 26) /*GPIO_3_26 */ +#define EPDC_BDR0 (3*32 + 23) /*GPIO_4_23 */ +#define EPDC_SDCE0 (3*32 + 25) /*GPIO_4_25 */ +#define EPDC_SDCE1 (3*32 + 26) /*GPIO_4_26 */ +#define EPDC_SDCE2 (3*32 + 27) /*GPIO_4_27 */ + +#define EPDC_PMIC_WAKE (5*32 + 16) /*GPIO_6_16 */ +#define EPDC_PMIC_INT (5*32 + 17) /*GPIO_6_17 */ +#define EPDC_VCOM (3*32 + 21) /*GPIO_4_21 */ +#define EPDC_PWRSTAT (2*32 + 28) /*GPIO_3_28 */ +#define EPDC_ELCDIF_BACKLIGHT (1*32 + 18) /*GPIO_2_18 */ +#define CSPI_CS1 (3*32 + 13) /*GPIO_4_13 */ +#define CSPI_CS2 (3*32 + 11) /*GPIO_4_11*/ + +extern int __init mx50_arm2_init_mc13892(void); +extern struct cpu_wp *(*get_cpu_wp)(int *wp); +extern void (*set_num_cpu_wp)(int num); +static int num_cpu_wp = 2; + +static struct pad_desc mx50_armadillo2[] = { + /* SD1 */ + MX50_PAD_ECSPI2_SS0__GPIO_4_19, + MX50_PAD_EIM_CRE__GPIO_1_27, + MX50_PAD_SD1_CMD__SD1_CMD, + + MX50_PAD_SD1_CLK__SD1_CLK, + MX50_PAD_SD1_D0__SD1_D0, + MX50_PAD_SD1_D1__SD1_D1, + MX50_PAD_SD1_D2__SD1_D2, + MX50_PAD_SD1_D3__SD1_D3, + + /* SD2 */ + MX50_PAD_SD2_CD__GPIO_5_17, + MX50_PAD_SD2_WP__GPIO_5_16, + MX50_PAD_SD2_CMD__SD2_CMD, + MX50_PAD_SD2_CLK__SD2_CLK, + MX50_PAD_SD2_D0__SD2_D0, + MX50_PAD_SD2_D1__SD2_D1, + MX50_PAD_SD2_D2__SD2_D2, + MX50_PAD_SD2_D3__SD2_D3, + MX50_PAD_SD2_D4__SD2_D4, + MX50_PAD_SD2_D5__SD2_D5, + MX50_PAD_SD2_D6__SD2_D6, + MX50_PAD_SD2_D7__SD2_D7, + + /* SD3 */ + MX50_PAD_SD3_WP__GPIO_5_28, + MX50_PAD_KEY_COL2__GPIO_4_4, + MX50_PAD_SD3_CMD__SD3_CMD, + MX50_PAD_SD3_CLK__SD3_CLK, + MX50_PAD_SD3_D0__SD3_D0, + MX50_PAD_SD3_D1__SD3_D1, + MX50_PAD_SD3_D2__SD3_D2, + MX50_PAD_SD3_D3__SD3_D3, + MX50_PAD_SD3_D4__SD3_D4, + MX50_PAD_SD3_D5__SD3_D5, + MX50_PAD_SD3_D6__SD3_D6, + MX50_PAD_SD3_D7__SD3_D7, + + MX50_PAD_SSI_RXD__SSI_RXD, + MX50_PAD_SSI_TXD__SSI_TXD, + MX50_PAD_SSI_TXC__SSI_TXC, + MX50_PAD_SSI_TXFS__SSI_TXFS, + + /* LINE1_DETECT (headphone detect) */ + MX50_PAD_ECSPI1_SS0__GPIO_4_15, + + /* PWR_INT */ + MX50_PAD_ECSPI2_MISO__GPIO_4_18, + + /* UART pad setting */ + MX50_PAD_UART1_TXD__UART1_TXD, + MX50_PAD_UART1_RXD__UART1_RXD, + MX50_PAD_UART1_CTS__UART1_CTS, + MX50_PAD_UART1_RTS__UART1_RTS, + MX50_PAD_UART2_TXD__UART2_TXD, + MX50_PAD_UART2_RXD__UART2_RXD, + MX50_PAD_UART2_CTS__UART2_CTS, + MX50_PAD_UART2_RTS__UART2_RTS, + + MX50_PAD_I2C1_SCL__I2C1_SCL, + MX50_PAD_I2C1_SDA__I2C1_SDA, + MX50_PAD_I2C2_SCL__I2C2_SCL, + MX50_PAD_I2C2_SDA__I2C2_SDA, + MX50_PAD_I2C3_SCL__I2C3_SCL, + MX50_PAD_I2C3_SDA__I2C3_SDA, + + /* EPDC pins */ + MX50_PAD_EPDC_D0__EPDC_D0, + MX50_PAD_EPDC_D1__EPDC_D1, + MX50_PAD_EPDC_D2__EPDC_D2, + MX50_PAD_EPDC_D3__EPDC_D3, + MX50_PAD_EPDC_D4__EPDC_D4, + MX50_PAD_EPDC_D5__EPDC_D5, + MX50_PAD_EPDC_D6__EPDC_D6, + MX50_PAD_EPDC_D7__EPDC_D7, + MX50_PAD_EPDC_GDCLK__EPDC_GDCLK, + MX50_PAD_EPDC_GDSP__EPDC_GDSP, + MX50_PAD_EPDC_GDOE__EPDC_GDOE , + MX50_PAD_EPDC_GDRL__EPDC_GDRL, + MX50_PAD_EPDC_SDCLK__EPDC_SDCLK, + MX50_PAD_EPDC_SDOE__EPDC_SDOE, + MX50_PAD_EPDC_SDLE__EPDC_SDLE, + MX50_PAD_EPDC_SDSHR__EPDC_SDSHR, + MX50_PAD_EPDC_BDR0__EPDC_BDR0, + MX50_PAD_EPDC_SDCE0__EPDC_SDCE0, + MX50_PAD_EPDC_SDCE1__EPDC_SDCE1, + MX50_PAD_EPDC_SDCE2__EPDC_SDCE2, + + MX50_PAD_EPDC_PWRSTAT__GPIO_3_28, + MX50_PAD_EPDC_VCOM0__GPIO_4_21, + + MX50_PAD_DISP_D8__DISP_D8, + MX50_PAD_DISP_D9__DISP_D9, + MX50_PAD_DISP_D10__DISP_D10, + MX50_PAD_DISP_D11__DISP_D11, + MX50_PAD_DISP_D12__DISP_D12, + MX50_PAD_DISP_D13__DISP_D13, + MX50_PAD_DISP_D14__DISP_D14, + MX50_PAD_DISP_D15__DISP_D15, + MX50_PAD_DISP_RS__ELCDIF_VSYNC, + + /* ELCDIF contrast */ + MX50_PAD_DISP_BUSY__GPIO_2_18, + + MX50_PAD_DISP_CS__ELCDIF_HSYNC, + MX50_PAD_DISP_RD__ELCDIF_EN, + MX50_PAD_DISP_WR__ELCDIF_PIXCLK, + + /* EPD PMIC WAKEUP */ + MX50_PAD_UART4_TXD__GPIO_6_16, + + /* EPD PMIC intr */ + MX50_PAD_UART4_RXD__GPIO_6_17, + + MX50_PAD_EPITO__USBH1_PWR, + /* Need to comment below line if + * one needs to debug owire. + */ + MX50_PAD_OWIRE__USBH1_OC, + MX50_PAD_PWM2__USBOTG_PWR, + MX50_PAD_PWM1__USBOTG_OC, + + MX50_PAD_SSI_RXC__FEC_MDIO, + MX50_PAD_SSI_RXC__FEC_MDIO, + MX50_PAD_DISP_D0__FEC_TXCLK, + MX50_PAD_DISP_D1__FEC_RX_ER, + MX50_PAD_DISP_D2__FEC_RX_DV, + MX50_PAD_DISP_D3__FEC_RXD1, + MX50_PAD_DISP_D4__FEC_RXD0, + MX50_PAD_DISP_D5__FEC_TX_EN, + MX50_PAD_DISP_D6__FEC_TXD1, + MX50_PAD_DISP_D7__FEC_TXD0, + MX50_PAD_SSI_RXFS__FEC_MDC, + + MX50_PAD_CSPI_SS0__CSPI_SS0, + MX50_PAD_ECSPI1_MOSI__CSPI_SS1, + MX50_PAD_CSPI_MOSI__CSPI_MOSI, + MX50_PAD_CSPI_MISO__CSPI_MISO, +}; + +static struct pad_desc mx50_gpmi_nand[] = { + MX50_PIN_EIM_DA8__NANDF_CLE, + MX50_PIN_EIM_DA9__NANDF_ALE, + MX50_PIN_EIM_DA10__NANDF_CE0, + MX50_PIN_EIM_DA11__NANDF_CE1, + MX50_PIN_EIM_DA12__NANDF_CE2, + MX50_PIN_EIM_DA13__NANDF_CE3, + MX50_PIN_EIM_DA14__NANDF_READY, + MX50_PIN_EIM_DA15__NANDF_DQS, + MX50_PIN_SD3_D4__NANDF_D0, + MX50_PIN_SD3_D5__NANDF_D1, + MX50_PIN_SD3_D6__NANDF_D2, + MX50_PIN_SD3_D7__NANDF_D3, + MX50_PIN_SD3_D0__NANDF_D4, + MX50_PIN_SD3_D1__NANDF_D5, + MX50_PIN_SD3_D2__NANDF_D6, + MX50_PIN_SD3_D3__NANDF_D7, + MX50_PIN_SD3_CLK__NANDF_RDN, + MX50_PIN_SD3_CMD__NANDF_WRN, + MX50_PIN_SD3_WP__NANDF_RESETN, +}; + +static struct mxc_dvfs_platform_data dvfs_core_data = { + .reg_id = "SW1", + .clk1_id = "cpu_clk", + .clk2_id = "gpc_dvfs_clk", + .gpc_cntr_offset = MXC_GPC_CNTR_OFFSET, + .gpc_vcr_offset = MXC_GPC_VCR_OFFSET, + .ccm_cdcr_offset = MXC_CCM_CDCR_OFFSET, + .ccm_cacrr_offset = MXC_CCM_CACRR_OFFSET, + .ccm_cdhipr_offset = MXC_CCM_CDHIPR_OFFSET, + .prediv_mask = 0x1F800, + .prediv_offset = 11, + .prediv_val = 3, + .div3ck_mask = 0xE0000000, + .div3ck_offset = 29, + .div3ck_val = 2, + .emac_val = 0x08, + .upthr_val = 25, + .dnthr_val = 9, + .pncthr_val = 33, + .upcnt_val = 10, + .dncnt_val = 10, + .delay_time = 30, + .num_wp = 2, +}; + +/* working point(wp): 0 - 800MHz; 1 - 166.25MHz; */ +static struct cpu_wp cpu_wp_auto[] = { + { + .pll_rate = 800000000, + .cpu_rate = 800000000, + .pdf = 0, + .mfi = 8, + .mfd = 2, + .mfn = 1, + .cpu_podf = 0, + .cpu_voltage = 1050000,}, + { + .pll_rate = 800000000, + .cpu_rate = 160000000, + .pdf = 4, + .mfi = 8, + .mfd = 2, + .mfn = 1, + .cpu_podf = 4, + .cpu_voltage = 850000,}, +}; + +static struct cpu_wp *mx50_arm2_get_cpu_wp(int *wp) +{ + *wp = num_cpu_wp; + return cpu_wp_auto; +} + +static void mx50_arm2_set_num_cpu_wp(int num) +{ + num_cpu_wp = num; + return; +} + +static struct mxc_w1_config mxc_w1_data = { + .search_rom_accelerator = 1, +}; + +static struct fec_platform_data fec_data = { + .phy = PHY_INTERFACE_MODE_RMII, + .phy_mask = ~1UL, +}; + +/* workaround for cspi chipselect pin may not keep correct level when idle */ +static void mx50_arm2_gpio_spi_chipselect_active(int cspi_mode, int status, + int chipselect) +{ + switch (cspi_mode) { + case 1: + break; + case 2: + break; + case 3: + switch (chipselect) { + case 0x1: + { + struct pad_desc cspi_ss0 = MX50_PAD_CSPI_SS0__CSPI_SS0; + struct pad_desc cspi_cs1 = MX50_PAD_ECSPI1_MOSI__GPIO_4_13; + + /* pull up/down deassert it */ + mxc_iomux_v3_setup_pad(&cspi_ss0); + mxc_iomux_v3_setup_pad(&cspi_cs1); + + gpio_request(CSPI_CS1, "cspi-cs1"); + gpio_direction_input(CSPI_CS1); + } + break; + case 0x2: + { + struct pad_desc cspi_ss1 = MX50_PAD_ECSPI1_MOSI__CSPI_SS1; + struct pad_desc cspi_ss0 = MX50_PAD_CSPI_SS0__GPIO_4_11; + + /*disable other ss */ + mxc_iomux_v3_setup_pad(&cspi_ss1); + mxc_iomux_v3_setup_pad(&cspi_ss0); + + /* pull up/down deassert it */ + gpio_request(CSPI_CS2, "cspi-cs2"); + gpio_direction_input(CSPI_CS2); + } + break; + default: + break; + } + break; + + default: + break; + } +} + +static void mx50_arm2_gpio_spi_chipselect_inactive(int cspi_mode, int status, + int chipselect) +{ + switch (cspi_mode) { + case 1: + break; + case 2: + break; + case 3: + switch (chipselect) { + case 0x1: + gpio_free(CSPI_CS1); + break; + case 0x2: + gpio_free(CSPI_CS2); + break; + default: + break; + } + break; + default: + break; + } + +} + +static struct mxc_spi_master mxcspi1_data = { + .maxchipselect = 4, + .spi_version = 23, + .chipselect_active = mx50_arm2_gpio_spi_chipselect_active, + .chipselect_inactive = mx50_arm2_gpio_spi_chipselect_inactive, +}; + +static struct mxc_spi_master mxcspi3_data = { + .maxchipselect = 4, + .spi_version = 7, + .chipselect_active = mx50_arm2_gpio_spi_chipselect_active, + .chipselect_inactive = mx50_arm2_gpio_spi_chipselect_inactive, +}; + +static struct mxc_i2c_platform_data mxci2c_data = { + .i2c_clk = 100000, +}; + +static struct mxc_srtc_platform_data srtc_data = { + .srtc_sec_mode_addr = OCOTP_CTRL_BASE_ADDR + 0x80, +}; + +static int z160_version = 1; + +#define mV_to_uV(mV) (mV * 1000) +#define uV_to_mV(uV) (uV / 1000) +#define V_to_uV(V) (mV_to_uV(V * 1000)) +#define uV_to_V(uV) (uV_to_mV(uV) / 1000) + +static struct regulator_init_data max17135_init_data[] __initdata = { + { + .constraints = { + .name = "DISPLAY", + }, + }, { + .constraints = { + .name = "GVDD", + .min_uV = V_to_uV(20), + .max_uV = V_to_uV(20), + }, + }, { + .constraints = { + .name = "GVEE", + .min_uV = V_to_uV(-22), + .max_uV = V_to_uV(-22), + }, + }, { + .constraints = { + .name = "HVINN", + .min_uV = V_to_uV(-22), + .max_uV = V_to_uV(-22), + }, + }, { + .constraints = { + .name = "HVINP", + .min_uV = V_to_uV(20), + .max_uV = V_to_uV(20), + }, + }, { + .constraints = { + .name = "VCOM", + .min_uV = mV_to_uV(-4325), + .max_uV = mV_to_uV(-500), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + }, { + .constraints = { + .name = "VNEG", + .min_uV = V_to_uV(-15), + .max_uV = V_to_uV(-15), + }, + }, { + .constraints = { + .name = "VPOS", + .min_uV = V_to_uV(15), + .max_uV = V_to_uV(15), + }, + }, +}; + +static void epdc_get_pins(void) +{ + /* Claim GPIOs for EPDC pins - used during power up/down */ + gpio_request(EPDC_D0, "epdc_d0"); + gpio_request(EPDC_D1, "epdc_d1"); + gpio_request(EPDC_D2, "epdc_d2"); + gpio_request(EPDC_D3, "epdc_d3"); + gpio_request(EPDC_D4, "epdc_d4"); + gpio_request(EPDC_D5, "epdc_d5"); + gpio_request(EPDC_D6, "epdc_d6"); + gpio_request(EPDC_D7, "epdc_d7"); + gpio_request(EPDC_GDCLK, "epdc_gdclk"); + gpio_request(EPDC_GDSP, "epdc_gdsp"); + gpio_request(EPDC_GDOE, "epdc_gdoe"); + gpio_request(EPDC_GDRL, "epdc_gdrl"); + gpio_request(EPDC_SDCLK, "epdc_sdclk"); + gpio_request(EPDC_SDOE, "epdc_sdoe"); + gpio_request(EPDC_SDLE, "epdc_sdle"); + gpio_request(EPDC_SDSHR, "epdc_sdshr"); + gpio_request(EPDC_BDR0, "epdc_bdr0"); + gpio_request(EPDC_SDCE0, "epdc_sdce0"); + gpio_request(EPDC_SDCE1, "epdc_sdce1"); + gpio_request(EPDC_SDCE2, "epdc_sdce2"); +} + +static void epdc_put_pins(void) +{ + gpio_free(EPDC_D0); + gpio_free(EPDC_D1); + gpio_free(EPDC_D2); + gpio_free(EPDC_D3); + gpio_free(EPDC_D4); + gpio_free(EPDC_D5); + gpio_free(EPDC_D6); + gpio_free(EPDC_D7); + gpio_free(EPDC_GDCLK); + gpio_free(EPDC_GDSP); + gpio_free(EPDC_GDOE); + gpio_free(EPDC_GDRL); + gpio_free(EPDC_SDCLK); + gpio_free(EPDC_SDOE); + gpio_free(EPDC_SDLE); + gpio_free(EPDC_SDSHR); + gpio_free(EPDC_BDR0); + gpio_free(EPDC_SDCE0); + gpio_free(EPDC_SDCE1); + gpio_free(EPDC_SDCE2); +} + +static void epdc_enable_pins(void) +{ + struct pad_desc epdc_d0 = MX50_PAD_EPDC_D0__EPDC_D0; + struct pad_desc epdc_d1 = MX50_PAD_EPDC_D1__EPDC_D1; + struct pad_desc epdc_d2 = MX50_PAD_EPDC_D2__EPDC_D2; + struct pad_desc epdc_d3 = MX50_PAD_EPDC_D3__EPDC_D3; + struct pad_desc epdc_d4 = MX50_PAD_EPDC_D4__EPDC_D4; + struct pad_desc epdc_d5 = MX50_PAD_EPDC_D5__EPDC_D5; + struct pad_desc epdc_d6 = MX50_PAD_EPDC_D6__EPDC_D6; + struct pad_desc epdc_d7 = MX50_PAD_EPDC_D7__EPDC_D7; + struct pad_desc epdc_gdclk = MX50_PAD_EPDC_GDCLK__EPDC_GDCLK; + struct pad_desc epdc_gdsp = MX50_PAD_EPDC_GDSP__EPDC_GDSP; + struct pad_desc epdc_gdoe = MX50_PAD_EPDC_GDOE__EPDC_GDOE; + struct pad_desc epdc_gdrl = MX50_PAD_EPDC_GDRL__EPDC_GDRL; + struct pad_desc epdc_sdclk = MX50_PAD_EPDC_SDCLK__EPDC_SDCLK; + struct pad_desc epdc_sdoe = MX50_PAD_EPDC_SDOE__EPDC_SDOE; + struct pad_desc epdc_sdle = MX50_PAD_EPDC_SDLE__EPDC_SDLE; + struct pad_desc epdc_sdshr = MX50_PAD_EPDC_SDSHR__EPDC_SDSHR; + struct pad_desc epdc_bdr0 = MX50_PAD_EPDC_BDR0__EPDC_BDR0; + struct pad_desc epdc_sdce0 = MX50_PAD_EPDC_SDCE0__EPDC_SDCE0; + struct pad_desc epdc_sdce1 = MX50_PAD_EPDC_SDCE1__EPDC_SDCE1; + struct pad_desc epdc_sdce2 = MX50_PAD_EPDC_SDCE2__EPDC_SDCE2; + + /* Configure MUX settings to enable EPDC use */ + mxc_iomux_v3_setup_pad(&epdc_d0); + mxc_iomux_v3_setup_pad(&epdc_d1); + mxc_iomux_v3_setup_pad(&epdc_d2); + mxc_iomux_v3_setup_pad(&epdc_d3); + mxc_iomux_v3_setup_pad(&epdc_d4); + mxc_iomux_v3_setup_pad(&epdc_d5); + mxc_iomux_v3_setup_pad(&epdc_d6); + mxc_iomux_v3_setup_pad(&epdc_d7); + mxc_iomux_v3_setup_pad(&epdc_gdclk); + mxc_iomux_v3_setup_pad(&epdc_gdsp); + mxc_iomux_v3_setup_pad(&epdc_gdoe); + mxc_iomux_v3_setup_pad(&epdc_gdrl); + mxc_iomux_v3_setup_pad(&epdc_sdclk); + mxc_iomux_v3_setup_pad(&epdc_sdoe); + mxc_iomux_v3_setup_pad(&epdc_sdle); + mxc_iomux_v3_setup_pad(&epdc_sdshr); + mxc_iomux_v3_setup_pad(&epdc_bdr0); + mxc_iomux_v3_setup_pad(&epdc_sdce0); + mxc_iomux_v3_setup_pad(&epdc_sdce1); + mxc_iomux_v3_setup_pad(&epdc_sdce2); + + gpio_direction_input(EPDC_D0); + gpio_direction_input(EPDC_D1); + gpio_direction_input(EPDC_D2); + gpio_direction_input(EPDC_D3); + gpio_direction_input(EPDC_D4); + gpio_direction_input(EPDC_D5); + gpio_direction_input(EPDC_D6); + gpio_direction_input(EPDC_D7); + gpio_direction_input(EPDC_GDCLK); + gpio_direction_input(EPDC_GDSP); + gpio_direction_input(EPDC_GDOE); + gpio_direction_input(EPDC_GDRL); + gpio_direction_input(EPDC_SDCLK); + gpio_direction_input(EPDC_SDOE); + gpio_direction_input(EPDC_SDLE); + gpio_direction_input(EPDC_SDSHR); + gpio_direction_input(EPDC_BDR0); + gpio_direction_input(EPDC_SDCE0); + gpio_direction_input(EPDC_SDCE1); + gpio_direction_input(EPDC_SDCE2); +} + +static void epdc_disable_pins(void) +{ + struct pad_desc epdc_d0 = MX50_PAD_EPDC_D0__GPIO_3_0; + struct pad_desc epdc_d1 = MX50_PAD_EPDC_D1__GPIO_3_1; + struct pad_desc epdc_d2 = MX50_PAD_EPDC_D2__GPIO_3_2; + struct pad_desc epdc_d3 = MX50_PAD_EPDC_D3__GPIO_3_3; + struct pad_desc epdc_d4 = MX50_PAD_EPDC_D4__GPIO_3_4; + struct pad_desc epdc_d5 = MX50_PAD_EPDC_D5__GPIO_3_5; + struct pad_desc epdc_d6 = MX50_PAD_EPDC_D6__GPIO_3_6; + struct pad_desc epdc_d7 = MX50_PAD_EPDC_D7__GPIO_3_7; + struct pad_desc epdc_gdclk = MX50_PAD_EPDC_GDCLK__GPIO_3_16; + struct pad_desc epdc_gdsp = MX50_PAD_EPDC_GDSP__GPIO_3_17; + struct pad_desc epdc_gdoe = MX50_PAD_EPDC_GDOE__GPIO_3_18; + struct pad_desc epdc_gdrl = MX50_PAD_EPDC_GDRL__GPIO_3_19; + struct pad_desc epdc_sdclk = MX50_PAD_EPDC_SDCLK__GPIO_3_20; + struct pad_desc epdc_sdoe = MX50_PAD_EPDC_SDOE__GPIO_3_23; + struct pad_desc epdc_sdle = MX50_PAD_EPDC_SDLE__GPIO_3_24; + struct pad_desc epdc_sdshr = MX50_PAD_EPDC_SDSHR__GPIO_3_26; + struct pad_desc epdc_bdr0 = MX50_PAD_EPDC_BDR0__GPIO_4_23; + struct pad_desc epdc_sdce0 = MX50_PAD_EPDC_SDCE0__GPIO_4_25; + struct pad_desc epdc_sdce1 = MX50_PAD_EPDC_SDCE1__GPIO_4_26; + struct pad_desc epdc_sdce2 = MX50_PAD_EPDC_SDCE2__GPIO_4_27; + + /* Configure MUX settings for EPDC pins to + * GPIO and drive to 0. */ + mxc_iomux_v3_setup_pad(&epdc_d0); + mxc_iomux_v3_setup_pad(&epdc_d1); + mxc_iomux_v3_setup_pad(&epdc_d2); + mxc_iomux_v3_setup_pad(&epdc_d3); + mxc_iomux_v3_setup_pad(&epdc_d4); + mxc_iomux_v3_setup_pad(&epdc_d5); + mxc_iomux_v3_setup_pad(&epdc_d6); + mxc_iomux_v3_setup_pad(&epdc_d7); + mxc_iomux_v3_setup_pad(&epdc_gdclk); + mxc_iomux_v3_setup_pad(&epdc_gdsp); + mxc_iomux_v3_setup_pad(&epdc_gdoe); + mxc_iomux_v3_setup_pad(&epdc_gdrl); + mxc_iomux_v3_setup_pad(&epdc_sdclk); + mxc_iomux_v3_setup_pad(&epdc_sdoe); + mxc_iomux_v3_setup_pad(&epdc_sdle); + mxc_iomux_v3_setup_pad(&epdc_sdshr); + mxc_iomux_v3_setup_pad(&epdc_bdr0); + mxc_iomux_v3_setup_pad(&epdc_sdce0); + mxc_iomux_v3_setup_pad(&epdc_sdce1); + mxc_iomux_v3_setup_pad(&epdc_sdce2); + + gpio_direction_output(EPDC_D0, 0); + gpio_direction_output(EPDC_D1, 0); + gpio_direction_output(EPDC_D2, 0); + gpio_direction_output(EPDC_D3, 0); + gpio_direction_output(EPDC_D4, 0); + gpio_direction_output(EPDC_D5, 0); + gpio_direction_output(EPDC_D6, 0); + gpio_direction_output(EPDC_D7, 0); + gpio_direction_output(EPDC_GDCLK, 0); + gpio_direction_output(EPDC_GDSP, 0); + gpio_direction_output(EPDC_GDOE, 0); + gpio_direction_output(EPDC_GDRL, 0); + gpio_direction_output(EPDC_SDCLK, 0); + gpio_direction_output(EPDC_SDOE, 0); + gpio_direction_output(EPDC_SDLE, 0); + gpio_direction_output(EPDC_SDSHR, 0); + gpio_direction_output(EPDC_BDR0, 0); + gpio_direction_output(EPDC_SDCE0, 0); + gpio_direction_output(EPDC_SDCE1, 0); + gpio_direction_output(EPDC_SDCE2, 0); +} + +static struct fb_videomode e60_mode = { + .name = "E60", + .refresh = 50, + .xres = 800, + .yres = 600, + .pixclock = 20000000, + .left_margin = 10, + .right_margin = 217, + .upper_margin = 4, + .lower_margin = 10, + .hsync_len = 20, + .vsync_len = 4, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, +}; + +static struct fb_videomode e97_mode = { + .name = "E97", + .refresh = 50, + .xres = 1200, + .yres = 825, + .pixclock = 32000000, + .left_margin = 8, + .right_margin = 125, + .upper_margin = 4, + .lower_margin = 17, + .hsync_len = 20, + .vsync_len = 4, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, +}; + +static struct mxc_epdc_fb_mode panel_modes[] = { + { + &e60_mode, + 4, 10, 20, 10, 20, 480, 20, 0, 1, 1, + }, + { + &e97_mode, + 8, 10, 20, 10, 20, 580, 20, 0, 1, 3, + }, +}; + +static struct mxc_epdc_fb_platform_data epdc_data = { + .epdc_mode = panel_modes, + .num_modes = ARRAY_SIZE(panel_modes), + .get_pins = epdc_get_pins, + .put_pins = epdc_put_pins, + .enable_pins = epdc_enable_pins, + .disable_pins = epdc_disable_pins, +}; + + +static struct max17135_platform_data max17135_pdata __initdata = { + .vneg_pwrup = 1, + .gvee_pwrup = 1, + .vpos_pwrup = 2, + .gvdd_pwrup = 1, + .gvdd_pwrdn = 1, + .vpos_pwrdn = 2, + .gvee_pwrdn = 1, + .vneg_pwrdn = 1, + .gpio_pmic_pwrgood = EPDC_PWRSTAT, + .gpio_pmic_vcom_ctrl = EPDC_VCOM, + .gpio_pmic_wakeup = EPDC_PMIC_WAKE, + .gpio_pmic_intr = EPDC_PMIC_INT, + .regulator_init = max17135_init_data, +}; + +static int __initdata max17135_pass_num = { 1 }; +static int __initdata max17135_vcom = { -1250000 }; +/* + * Parse user specified options (`max17135:') + * example: + * max17135:pass=2,vcom=-1250000 + */ +static int __init max17135_setup(char *options) +{ + char *opt; + while ((opt = strsep(&options, ",")) != NULL) { + if (!*opt) + continue; + if (!strncmp(opt, "pass=", 5)) + max17135_pass_num = + simple_strtoul(opt + 5, NULL, 0); + if (!strncmp(opt, "vcom=", 5)) { + int offs = 5; + if (opt[5] == '-') + offs = 6; + max17135_vcom = + simple_strtoul(opt + offs, NULL, 0); + max17135_vcom = -max17135_vcom; + } + } + return 1; +} + +__setup("max17135:", max17135_setup); + +static struct i2c_board_info mxc_i2c1_board_info[] __initdata = { + { + .type = "sgtl5000-i2c", + .addr = 0x0a, + }, + { + .type = "backlight-i2c", + .addr = 0x2c, + }, + { + .type = "eeprom", + .addr = 0x50, + }, +}; + +static struct i2c_board_info mxc_i2c2_board_info[] __initdata = { + { + I2C_BOARD_INFO("max17135", 0x48), + .platform_data = &max17135_pdata, + }, +}; + +static struct mtd_partition mxc_dataflash_partitions[] = { + { + .name = "bootloader", + .offset = 0, + .size = 0x000100000,}, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL,}, +}; + +static struct flash_platform_data mxc_spi_flash_data[] = { + { + .name = "mxc_dataflash", + .parts = mxc_dataflash_partitions, + .nr_parts = ARRAY_SIZE(mxc_dataflash_partitions), + .type = "at45db321d",} +}; + + +static struct spi_board_info mxc_dataflash_device[] __initdata = { + { + .modalias = "mxc_dataflash", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 3, + .chip_select = 1, + .platform_data = &mxc_spi_flash_data[0],}, +}; + +static int sdhc_write_protect(struct device *dev) +{ + unsigned short rc = 0; + + if (to_platform_device(dev)->id == 0) + rc = gpio_get_value(SD1_WP); + else if (to_platform_device(dev)->id == 1) + rc = gpio_get_value(SD2_WP); + else if (to_platform_device(dev)->id == 2) + rc = gpio_get_value(SD3_WP); + + return rc; +} + +static unsigned int sdhc_get_card_det_status(struct device *dev) +{ + int ret = 0; + if (to_platform_device(dev)->id == 0) + ret = gpio_get_value(SD1_CD); + else if (to_platform_device(dev)->id == 1) + ret = gpio_get_value(SD2_CD); + else if (to_platform_device(dev)->id == 2) + ret = gpio_get_value(SD3_CD); + + return ret; +} + +static struct mxc_mmc_platform_data mmc1_data = { + .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 + | MMC_VDD_31_32, + .caps = MMC_CAP_4_BIT_DATA, + .min_clk = 400000, + .max_clk = 50000000, + .card_inserted_state = 0, + .status = sdhc_get_card_det_status, + .wp_status = sdhc_write_protect, + .clock_mmc = "esdhc_clk", + .power_mmc = NULL, +}; + +static struct mxc_mmc_platform_data mmc2_data = { + .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 + | MMC_VDD_31_32, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .min_clk = 400000, + .max_clk = 50000000, + .card_inserted_state = 0, + .status = sdhc_get_card_det_status, + .wp_status = sdhc_write_protect, + .clock_mmc = "esdhc_clk", +}; + +static struct mxc_mmc_platform_data mmc3_data = { + .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 + | MMC_VDD_31_32, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_DATA_DDR, + .min_clk = 400000, + .max_clk = 40000000, + .dll_override_en = 1, + .dll_delay_cells = 0xc, + .card_inserted_state = 0, + .status = sdhc_get_card_det_status, + .wp_status = sdhc_write_protect, + .clock_mmc = "esdhc_clk", + .clk_always_on = 1, +}; + +static int mxc_sgtl5000_amp_enable(int enable) +{ +/* TO DO */ + return 0; +} + +static int headphone_det_status(void) +{ + return (gpio_get_value(HP_DETECT) != 0); +} + +static struct mxc_audio_platform_data sgtl5000_data = { + .ssi_num = 1, + .src_port = 2, + .ext_port = 3, + .hp_irq = IOMUX_TO_IRQ_V3(HP_DETECT), + .hp_status = headphone_det_status, + .amp_enable = mxc_sgtl5000_amp_enable, + .sysclk = 12288000, +}; + +static struct platform_device mxc_sgtl5000_device = { + .name = "imx-3stack-sgtl5000", +}; + +static struct pad_desc armadillo2_wvga_pads[] = { + MX50_PAD_DISP_D0__DISP_D0, + MX50_PAD_DISP_D1__DISP_D1, + MX50_PAD_DISP_D2__DISP_D2, + MX50_PAD_DISP_D3__DISP_D3, + MX50_PAD_DISP_D4__DISP_D4, + MX50_PAD_DISP_D5__DISP_D5, + MX50_PAD_DISP_D6__DISP_D6, + MX50_PAD_DISP_D7__DISP_D7, +}; + +static void wvga_reset(void) +{ + mxc_iomux_v3_setup_multiple_pads(armadillo2_wvga_pads, \ + ARRAY_SIZE(armadillo2_wvga_pads)); + return; +} + +static struct mxc_lcd_platform_data lcd_wvga_data = { + .reset = wvga_reset, +}; + +static struct platform_device lcd_wvga_device = { + .name = "lcd_claa", + .dev = { + .platform_data = &lcd_wvga_data, + }, +}; + +static struct fb_videomode video_modes[] = { + { + /* 800x480 @ 57 Hz , pixel clk @ 27MHz */ + "CLAA-WVGA", 57, 800, 480, 37037, 40, 60, 10, 10, 20, 10, + FB_SYNC_CLK_LAT_FALL, + FB_VMODE_NONINTERLACED, + 0,}, +}; + +static struct mxc_fb_platform_data fb_data[] = { + { + .interface_pix_fmt = V4L2_PIX_FMT_RGB565, + .mode_str = "CLAA-WVGA", + .mode = video_modes, + .num_modes = ARRAY_SIZE(video_modes), + }, +}; + +static int __initdata enable_w1 = { 0 }; +static int __init w1_setup(char *__unused) +{ + enable_w1 = 1; + return cpu_is_mx50(); +} + +__setup("w1", w1_setup); + +int enable_gpmi_nand = { 0 }; +static int __init gpmi_nand_setup(char *__unused) +{ + enable_gpmi_nand = 1; + return 1; +} + +__setup("gpmi:nand", gpmi_nand_setup); + +static struct mxs_dma_plat_data dma_apbh_data = { + .chan_base = MXS_DMA_CHANNEL_AHB_APBH, + .chan_num = MXS_MAX_DMA_CHANNELS, +}; + +static int gpmi_nfc_platform_init(unsigned int max_chip_count) +{ + return !enable_gpmi_nand; +} + +static void gpmi_nfc_platform_exit(unsigned int max_chip_count) +{ +} + +static const char *gpmi_nfc_partition_source_types[] = { "cmdlinepart", 0 }; + +static struct gpmi_nfc_platform_data gpmi_nfc_platform_data = { + .nfc_version = 2, + .boot_rom_version = 1, + .clock_name = "gpmi-nfc", + .platform_init = gpmi_nfc_platform_init, + .platform_exit = gpmi_nfc_platform_exit, + .min_prop_delay_in_ns = 5, + .max_prop_delay_in_ns = 9, + .max_chip_count = 2, + .boot_area_size_in_bytes = 20 * SZ_1M, + .partition_source_types = gpmi_nfc_partition_source_types, + .partitions = 0, + .partition_count = 0, +}; + +static struct android_pmem_platform_data android_pmem_pdata = { + .name = "pmem_adsp", + .start = 0, + .size = SZ_4M, + .no_allocator = 0, + .cached = PMEM_NONCACHE_NORMAL, +}; + +static struct android_pmem_platform_data android_pmem_gpu_pdata = { + .name = "pmem_gpu", + .start = 0, + .size = SZ_32M, + .no_allocator = 0, + .cached = PMEM_CACHE_ENABLE, +}; + +static struct android_usb_platform_data android_usb_pdata = { + .vendor_id = 0x0bb4, + .product_id = 0x0c01, + .adb_product_id = 0x0c02, + .version = 0x0100, + .product_name = "Android Phone", + .manufacturer_name = "Freescale", + .nluns = 3, +}; + +/* OTP data */ +/* Building up eight registers's names of a bank */ +#define BANK(a, b, c, d, e, f, g, h) \ + {\ + ("HW_OCOTP_"#a), ("HW_OCOTP_"#b), ("HW_OCOTP_"#c), ("HW_OCOTP_"#d), \ + ("HW_OCOTP_"#e), ("HW_OCOTP_"#f), ("HW_OCOTP_"#g), ("HW_OCOTP_"#h) \ + } + +#define BANKS (5) +#define BANK_ITEMS (8) +static const char *bank_reg_desc[BANKS][BANK_ITEMS] = { + BANK(LOCK, CFG0, CFG1, CFG2, CFG3, CFG4, CFG5, CFG6), + BANK(MEM0, MEM1, MEM2, MEM3, MEM4, MEM5, GP0, GP1), + BANK(SCC0, SCC1, SCC2, SCC3, SCC4, SCC5, SCC6, SCC7), + BANK(SRK0, SRK1, SRK2, SRK3, SRK4, SRK5, SRK6, SRK7), + BANK(SJC0, SJC1, MAC0, MAC1, HWCAP0, HWCAP1, HWCAP2, SWCAP), +}; + +static struct fsl_otp_data otp_data = { + .fuse_name = (char **)bank_reg_desc, + .fuse_num = BANKS * BANK_ITEMS, +}; +#undef BANK +#undef BANKS +#undef BANK_ITEMS + +/*! + * Board specific fixup function. It is called by \b setup_arch() in + * setup.c file very early on during kernel starts. It allows the user to + * statically fill in the proper values for the passed-in parameters. None of + * the parameters is used currently. + * + * @param desc pointer to \b struct \b machine_desc + * @param tags pointer to \b struct \b tag + * @param cmdline pointer to the command line + * @param mi pointer to \b struct \b meminfo + */ +static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags, + char **cmdline, struct meminfo *mi) +{ + struct tag *t; + int size; + + mxc_set_cpu_type(MXC_CPU_MX50); + + get_cpu_wp = mx50_arm2_get_cpu_wp; + set_num_cpu_wp = mx50_arm2_set_num_cpu_wp; + + for_each_tag(t, tags) { + if (t->hdr.tag != ATAG_MEM) + continue; + size = t->u.mem.size; + + android_pmem_pdata.start = + PHYS_OFFSET + size - android_pmem_pdata.size; + android_pmem_gpu_pdata.start = + android_pmem_pdata.start - android_pmem_gpu_pdata.size; +#if 0 + gpu_device.resource[5].start = + android_pmem_gpu_pdata.start - SZ_16M; + gpu_device.resource[5].end = + gpu_device.resource[5].start + SZ_16M - 1; +#endif + size -= android_pmem_pdata.size; + size -= android_pmem_gpu_pdata.size; + //size -= SZ_16M; + t->u.mem.size = size; + } +} + +static void __init mx50_arm2_io_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx50_armadillo2, \ + ARRAY_SIZE(mx50_armadillo2)); + + gpio_request(SD1_WP, "sdhc1-wp"); + gpio_direction_input(SD1_WP); + + gpio_request(SD1_CD, "sdhc1-cd"); + gpio_direction_input(SD1_CD); + + gpio_request(SD2_WP, "sdhc2-wp"); + gpio_direction_input(SD2_WP); + + gpio_request(SD2_CD, "sdhc2-cd"); + gpio_direction_input(SD2_CD); + + gpio_request(SD3_WP, "sdhc3-wp"); + gpio_direction_input(SD3_WP); + + gpio_request(SD3_CD, "sdhc3-cd"); + gpio_direction_input(SD3_CD); + + gpio_request(HP_DETECT, "hp-det"); + gpio_direction_input(HP_DETECT); + + gpio_request(PWR_INT, "pwr-int"); + gpio_direction_input(PWR_INT); + + gpio_request(EPDC_PMIC_WAKE, "epdc-pmic-wake"); + gpio_direction_output(EPDC_PMIC_WAKE, 0); + + gpio_request(EPDC_VCOM, "epdc-vcom"); + gpio_direction_output(EPDC_VCOM, 0); + + gpio_request(EPDC_PMIC_INT, "epdc-pmic-int"); + gpio_direction_input(EPDC_PMIC_INT); + + gpio_request(EPDC_PWRSTAT, "epdc-pwrstat"); + gpio_direction_input(EPDC_PWRSTAT); + + /* ELCDIF backlight */ + gpio_request(EPDC_ELCDIF_BACKLIGHT, "elcdif-backlight"); + gpio_direction_output(EPDC_ELCDIF_BACKLIGHT, 1); + + if (enable_w1) { + struct pad_desc one_wire = MX50_PAD_OWIRE__OWIRE; + mxc_iomux_v3_setup_pad(&one_wire); + } + + if (enable_gpmi_nand) + mxc_iomux_v3_setup_multiple_pads(mx50_gpmi_nand, \ + ARRAY_SIZE(mx50_gpmi_nand)); +} + +/*! + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + /* SD card detect irqs */ + mxcsdhc1_device.resource[2].start = IOMUX_TO_IRQ_V3(SD1_CD); + mxcsdhc1_device.resource[2].end = IOMUX_TO_IRQ_V3(SD1_CD); + mxcsdhc2_device.resource[2].start = IOMUX_TO_IRQ_V3(SD2_CD); + mxcsdhc2_device.resource[2].end = IOMUX_TO_IRQ_V3(SD2_CD); + mxcsdhc3_device.resource[2].start = IOMUX_TO_IRQ_V3(SD3_CD); + mxcsdhc3_device.resource[2].end = IOMUX_TO_IRQ_V3(SD3_CD); + + mxc_cpu_common_init(); + mxc_register_gpios(); + mx50_arm2_io_init(); + + mxc_register_device(&mxc_dma_device, NULL); + //mxc_register_device(&mxs_dma_apbh_device, &dma_apbh_data); + mxc_register_device(&mxc_wdt_device, NULL); + mxc_register_device(&mxcspi1_device, &mxcspi1_data); + mxc_register_device(&mxcspi3_device, &mxcspi3_data); + mxc_register_device(&mxci2c_devices[0], &mxci2c_data); + mxc_register_device(&mxci2c_devices[1], &mxci2c_data); + mxc_register_device(&mxci2c_devices[2], &mxci2c_data); + + mxc_register_device(&mxc_rtc_device, &srtc_data); + mxc_register_device(&mxc_w1_master_device, &mxc_w1_data); + mxc_register_device(&gpu_device, &z160_version); + mxc_register_device(&mxc_pxp_device, NULL); + mxc_register_device(&mxc_pxp_client_device, NULL); + mxc_register_device(&mxc_pxp_v4l2, NULL); + mxc_register_device(&mxc_dvfs_core_device, &dvfs_core_data); + mxc_register_device(&busfreq_device, NULL); + + /* + mxc_register_device(&mx53_lpmode_device, NULL); + mxc_register_device(&mxc_dvfs_per_device, &dvfs_per_data); + */ + +/* mxc_register_device(&mxc_keypad_device, &keypad_plat_data); */ + + mxc_register_device(&mxcsdhc1_device, &mmc1_data); + mxc_register_device(&mxcsdhc2_device, &mmc2_data); + mxc_register_device(&mxcsdhc3_device, &mmc3_data); + mxc_register_device(&mxc_ssi1_device, NULL); + mxc_register_device(&mxc_ssi2_device, NULL); + mxc_register_device(&mxc_fec_device, &fec_data); + spi_register_board_info(mxc_dataflash_device, + ARRAY_SIZE(mxc_dataflash_device)); + i2c_register_board_info(1, mxc_i2c1_board_info, + ARRAY_SIZE(mxc_i2c1_board_info)); + max17135_pdata.pass_num = max17135_pass_num; + max17135_pdata.vcom_uV = max17135_vcom; + i2c_register_board_info(2, mxc_i2c2_board_info, + ARRAY_SIZE(mxc_i2c2_board_info)); + + mxc_register_device(&epdc_device, &epdc_data); + mxc_register_device(&lcd_wvga_device, &lcd_wvga_data); + mxc_register_device(&elcdif_device, &fb_data[0]); + mxc_register_device(&mxs_viim, NULL); + + mxc_register_device(&mxc_android_pmem_device, &android_pmem_pdata); + mxc_register_device(&mxc_android_pmem_gpu_device, &android_pmem_gpu_pdata); + mxc_register_device(&android_usb_device, &android_usb_pdata); + + mx50_arm2_init_mc13892(); +/* + pm_power_off = mxc_power_off; + */ + mxc_register_device(&mxc_sgtl5000_device, &sgtl5000_data); + mxc_register_device(&gpmi_nfc_device, &gpmi_nfc_platform_data); + mx5_usb_dr_init(); + mx5_usbh1_init(); + + mxc_register_device(&mxc_rngb_device, NULL); + mxc_register_device(&dcp_device, NULL); + mxc_register_device(&fsl_otp_device, &otp_data); +} + +static void __init mx50_arm2_timer_init(void) +{ + struct clk *uart_clk; + + mx50_clocks_init(32768, 24000000, 22579200); + + uart_clk = clk_get(NULL, "uart_clk.0"); + early_console_setup(MX53_BASE_ADDR(UART1_BASE_ADDR), uart_clk); +} + +static struct sys_timer mxc_timer = { + .init = mx50_arm2_timer_init, +}; + +/* + * The following uses standard kernel macros define in arch.h in order to + * initialize __mach_desc_MX50_ARM2 data structure. + */ +MACHINE_START(MX50_ARM2, "Freescale MX50 ARM2 Board") + /* Maintainer: Freescale Semiconductor, Inc. */ + .fixup = fixup_mxc_board, + .map_io = mx5_map_io, + .init_irq = mx5_init_irq, + .init_machine = mxc_board_init, + .timer = &mxc_timer, +MACHINE_END diff --git a/arch/arm/mach-mx5/mx50_arm2_pmic_mc13892.c b/arch/arm/mach-mx5/mx50_arm2_pmic_mc13892.c new file mode 100644 index 000000000000..05b8462ade40 --- /dev/null +++ b/arch/arm/mach-mx5/mx50_arm2_pmic_mc13892.c @@ -0,0 +1,418 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/err.h> +#include <linux/pmic_external.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/mc13892/core.h> +#include <mach/irqs.h> + +#include <mach/iomux-mx50.h> + +/* + * Convenience conversion. + * Here atm, maybe there is somewhere better for this. + */ +#define mV_to_uV(mV) (mV * 1000) +#define uV_to_mV(uV) (uV / 1000) +#define V_to_uV(V) (mV_to_uV(V * 1000)) +#define uV_to_V(uV) (uV_to_mV(uV) / 1000) + +/* Coin cell charger enable */ +#define COINCHEN_LSH 23 +#define COINCHEN_WID 1 +/* Coin cell charger voltage setting */ +#define VCOIN_LSH 20 +#define VCOIN_WID 3 + +/* Coin Charger voltage */ +#define VCOIN_2_5V 0x0 +#define VCOIN_2_7V 0x1 +#define VCOIN_2_8V 0x2 +#define VCOIN_2_9V 0x3 +#define VCOIN_3_0V 0x4 +#define VCOIN_3_1V 0x5 +#define VCOIN_3_2V 0x6 +#define VCOIN_3_3V 0x7 + +/* Keeps VSRTC and CLK32KMCU on for all states */ +#define DRM_LSH 4 +#define DRM_WID 1 + +/* regulator standby mask */ +#define GEN1_STBY_MASK (1 << 1) +#define IOHI_STBY_MASK (1 << 4) +#define DIG_STBY_MASK (1 << 10) +#define GEN2_STBY_MASK (1 << 13) +#define PLL_STBY_MASK (1 << 16) +#define USB2_STBY_MASK (1 << 19) + +#define GEN3_STBY_MASK (1 << 1) +#define CAM_STBY_MASK (1 << 7) +#define VIDEO_STBY_MASK (1 << 13) +#define AUDIO_STBY_MASK (1 << 16) +#define SD_STBY_MASK (1 << 19) + +#define REG_MODE_0_ALL_MASK (DIG_STBY_MASK | GEN1_STBY_MASK) +#define REG_MODE_1_ALL_MASK (CAM_STBY_MASK | VIDEO_STBY_MASK |\ + AUDIO_STBY_MASK | SD_STBY_MASK) + +/* switch mode setting */ +#define SW1MODE_LSB 0 +#define SW2MODE_LSB 10 +#define SW3MODE_LSB 0 +#define SW4MODE_LSB 8 + +#define SWMODE_MASK 0xF +#define SWMODE_AUTO 0x8 + +/* CPU */ +static struct regulator_consumer_supply sw1_consumers[] = { + { + .supply = "cpu_vcc", + } +}; + +static struct regulator_consumer_supply vgen1_consumers[] = { + { + /* sgtl5000 */ + .supply = "VDDA", + .dev_name = "1-000a", + }, + { + /* sgtl5000 */ + .supply = "VDDIO", + .dev_name = "1-000a", + }, +}; + +struct mc13892; + +static struct regulator_init_data sw1_init = { + .constraints = { + .name = "SW1", + .min_uV = mV_to_uV(600), + .max_uV = mV_to_uV(1375), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .valid_modes_mask = 0, + .always_on = 1, + .boot_on = 1, + .initial_state = PM_SUSPEND_MEM, + .state_mem = { + .uV = 850000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(sw1_consumers), + .consumer_supplies = sw1_consumers, +}; + +static struct regulator_init_data sw2_init = { + .constraints = { + .name = "SW2", + .min_uV = mV_to_uV(900), + .max_uV = mV_to_uV(1850), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + .initial_state = PM_SUSPEND_MEM, + .state_mem = { + .uV = 950000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + } +}; + +static struct regulator_init_data sw3_init = { + .constraints = { + .name = "SW3", + .min_uV = mV_to_uV(900), + .max_uV = mV_to_uV(1850), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + .initial_state = PM_SUSPEND_MEM, + .state_mem = { + .uV = 950000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + } +}; + +static struct regulator_init_data sw4_init = { + .constraints = { + .name = "SW4", + .min_uV = mV_to_uV(1100), + .max_uV = mV_to_uV(1850), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data viohi_init = { + .constraints = { + .name = "VIOHI", + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data vusb_init = { + .constraints = { + .name = "VUSB", + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data swbst_init = { + .constraints = { + .name = "SWBST", + } +}; + +static struct regulator_init_data vdig_init = { + .constraints = { + .name = "VDIG", + .min_uV = mV_to_uV(1200), + .max_uV = mV_to_uV(1200), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .boot_on = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data vpll_init = { + .constraints = { + .name = "VPLL", + .min_uV = mV_to_uV(1050), + .max_uV = mV_to_uV(1800), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vusb2_init = { + .constraints = { + .name = "VUSB2", + .min_uV = mV_to_uV(2400), + .max_uV = mV_to_uV(2775), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vvideo_init = { + .constraints = { + .name = "VVIDEO", + .min_uV = mV_to_uV(2775), + .max_uV = mV_to_uV(2775), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .apply_uV = 1, + }, +}; + +static struct regulator_init_data vaudio_init = { + .constraints = { + .name = "VAUDIO", + .min_uV = mV_to_uV(2300), + .max_uV = mV_to_uV(3000), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + } +}; + +static struct regulator_init_data vsd_init = { + .constraints = { + .name = "VSD", + .min_uV = mV_to_uV(1800), + .max_uV = mV_to_uV(3150), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + } +}; + +static struct regulator_init_data vcam_init = { + .constraints = { + .name = "VCAM", + .min_uV = mV_to_uV(2500), + .max_uV = mV_to_uV(3000), + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL, + .always_on = 1, + } +}; + +static struct regulator_init_data vgen1_init = { + .constraints = { + .name = "VGEN1", + .min_uV = mV_to_uV(3000), + .max_uV = mV_to_uV(3000), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(vgen1_consumers), + .consumer_supplies = vgen1_consumers, +}; + +static struct regulator_init_data vgen2_init = { + .constraints = { + .name = "VGEN2", + .min_uV = mV_to_uV(1200), + .max_uV = mV_to_uV(3150), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + } +}; + +static struct regulator_init_data vgen3_init = { + .constraints = { + .name = "VGEN3", + .min_uV = mV_to_uV(1800), + .max_uV = mV_to_uV(2900), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + } +}; + +static struct regulator_init_data gpo1_init = { + .constraints = { + .name = "GPO1", + } +}; + +static struct regulator_init_data gpo2_init = { + .constraints = { + .name = "GPO2", + } +}; + +static struct regulator_init_data gpo3_init = { + .constraints = { + .name = "GPO3", + } +}; + +static struct regulator_init_data gpo4_init = { + .constraints = { + .name = "GPO4", + } +}; + +static int mc13892_regulator_init(struct mc13892 *mc13892) +{ + unsigned int value, register_mask; + printk("Initializing regulators for mx50 arm2.\n"); + + /* enable standby controll for all regulators */ + pmic_read_reg(REG_MODE_0, &value, 0xffffff); + value |= REG_MODE_0_ALL_MASK; + pmic_write_reg(REG_MODE_0, value, 0xffffff); + + pmic_read_reg(REG_MODE_1, &value, 0xffffff); + value |= REG_MODE_1_ALL_MASK; + pmic_write_reg(REG_MODE_1, value, 0xffffff); + + /* enable switch audo mode */ + pmic_read_reg(REG_IDENTIFICATION, &value, 0xffffff); + /* only for mc13892 2.0A */ + if ((value & 0x0000FFFF) == 0x45d0) { + pmic_read_reg(REG_SW_4, &value, 0xffffff); + register_mask = (SWMODE_MASK << SW1MODE_LSB) | + (SWMODE_MASK << SW2MODE_LSB); + value &= ~register_mask; + value |= (SWMODE_AUTO << SW1MODE_LSB) | + (SWMODE_AUTO << SW2MODE_LSB); + pmic_write_reg(REG_SW_4, value, 0xffffff); + + pmic_read_reg(REG_SW_5, &value, 0xffffff); + register_mask = (SWMODE_MASK << SW3MODE_LSB) | + (SWMODE_MASK << SW4MODE_LSB); + value &= ~register_mask; + value |= (SWMODE_AUTO << SW3MODE_LSB) | + (SWMODE_AUTO << SW4MODE_LSB); + pmic_write_reg(REG_SW_5, value, 0xffffff); + } + /* Enable coin cell charger */ + value = BITFVAL(COINCHEN, 1) | BITFVAL(VCOIN, VCOIN_3_0V); + register_mask = BITFMASK(COINCHEN) | BITFMASK(VCOIN); + pmic_write_reg(REG_POWER_CTL0, value, register_mask); + +#if defined(CONFIG_RTC_DRV_MXC_V2) || defined(CONFIG_RTC_DRV_MXC_V2_MODULE) + value = BITFVAL(DRM, 1); + register_mask = BITFMASK(DRM); + pmic_write_reg(REG_POWER_CTL0, value, register_mask); +#endif + + mc13892_register_regulator(mc13892, MC13892_SW1, &sw1_init); + mc13892_register_regulator(mc13892, MC13892_SW2, &sw2_init); + mc13892_register_regulator(mc13892, MC13892_SW3, &sw3_init); + mc13892_register_regulator(mc13892, MC13892_SW4, &sw4_init); + mc13892_register_regulator(mc13892, MC13892_SWBST, &swbst_init); + mc13892_register_regulator(mc13892, MC13892_VIOHI, &viohi_init); + mc13892_register_regulator(mc13892, MC13892_VPLL, &vpll_init); + mc13892_register_regulator(mc13892, MC13892_VDIG, &vdig_init); + mc13892_register_regulator(mc13892, MC13892_VSD, &vsd_init); + mc13892_register_regulator(mc13892, MC13892_VUSB2, &vusb2_init); + mc13892_register_regulator(mc13892, MC13892_VVIDEO, &vvideo_init); + mc13892_register_regulator(mc13892, MC13892_VAUDIO, &vaudio_init); + mc13892_register_regulator(mc13892, MC13892_VCAM, &vcam_init); + mc13892_register_regulator(mc13892, MC13892_VGEN1, &vgen1_init); + mc13892_register_regulator(mc13892, MC13892_VGEN2, &vgen2_init); + mc13892_register_regulator(mc13892, MC13892_VGEN3, &vgen3_init); + mc13892_register_regulator(mc13892, MC13892_VUSB, &vusb_init); + mc13892_register_regulator(mc13892, MC13892_GPO1, &gpo1_init); + mc13892_register_regulator(mc13892, MC13892_GPO2, &gpo2_init); + mc13892_register_regulator(mc13892, MC13892_GPO3, &gpo3_init); + mc13892_register_regulator(mc13892, MC13892_GPO4, &gpo4_init); + + regulator_has_full_constraints(); + + return 0; +} + +static struct mc13892_platform_data mc13892_plat = { + .init = mc13892_regulator_init, +}; + +static struct spi_board_info __initdata mc13892_spi_device = { + .modalias = "pmic_spi", + .irq = IOMUX_TO_IRQ_V3(114), + .max_speed_hz = 6000000, /* max spi SCK clock speed in HZ */ + .bus_num = 3, + .chip_select = 0, + .platform_data = &mc13892_plat, +}; + + +int __init mx50_arm2_init_mc13892(void) +{ + return spi_register_board_info(&mc13892_spi_device, 1); +} diff --git a/arch/arm/mach-mx5/mx50_ddr_freq.S b/arch/arm/mach-mx5/mx50_ddr_freq.S new file mode 100644 index 000000000000..7628b6a7c7e6 --- /dev/null +++ b/arch/arm/mach-mx5/mx50_ddr_freq.S @@ -0,0 +1,479 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/linkage.h> + +/* + * mx50_ddr_freq_change + * + * Idle the processor (eg, wait for interrupt). + * Make sure DDR is in self-refresh. + * IRQs are already disabled. + */ +ENTRY(mx50_ddr_freq_change) + stmfd sp!, {r3,r4,r5,r6} @ Save registers + + mov r6, r0 @save CCM address + mov r5, r1 @save DataBahn address + mov r4, r2 @save new freq requested + + ldr r0, [r6, #0x90] + + /* If Databahn is in LPM4, exit that mode first. */ + ldr r1,[r5, #0x50] @Store LPM mode in r1. + mov r0, r1 + bic r0, #0x1F + str r0,[r5, #0x50] + +LoopCKE2: + /*Wait for CKE = 1 */ + ldr r0,[r5, #0xfc] + and r0, r0, #0x10000 + ldr r2, =0x10000 + cmp r0, r2 + bne LoopCKE2 + + /* + * Make sure the DDR is self-refresh, before switching its frequency + * and clock source + */ + + /* Step 1: Enter self-refresh mode */ + ldr r0,[r5, #0x4c] + orr r0,r0,#0x1 + str r0,[r5, #0x4c] + + /* Step 2: Poll the CKE_STATUS bit. */ +LoopCKE0: + /* Wait for CKE = 0 */ + ldr r0,[r5, #0xfc] + and r0, r0, #0x10000 + ldr r2, =0x10000 + cmp r0, r2 + beq LoopCKE0 + + /* Step 3: Mask the DLL lock state change, set bit 8 in int_mask. */ + ldr r0, [r5, #0xac] + orr r0, r0, #0x100 + str r0, [r5, #0xac] + + /* Step 4: Stop the Controller. */ + ldr r0,[r5] + bic r0, r0, #0x1 + str r0,[r5] + + /* Step 5: Clear the DLL lock state change bit 8 in int_ack */ + ldr r0, [r5, #0xa8] + orr r0, r0, #0x1000000 + str r0, [r5, #0xa8] + + /* Step 6: Clear the interrupt mask for DLL lock state. + * Bit 8 in int_mask */ + ldr r0, [r5, #0xac] + bic r0, r0, #0x100 + str r0, [r5, #0xac] + + /* Change the freq now */ + /* If the freq req is below 24MHz, set DDR to synchronous mode. + * else set to async mode. */ + ldr r0, =24000000 + cmp r4, r0 + bgt Async_Mode + + /* Set the DDR to be Synchronous + mode. */ + /* Set the Databahn to sync mode. */ + ldr r0, [r5, #0xdc] + orr r0, r0, #0x30000 + str r0, [r5, #0xdc] + + /* Turn OFF the DDR_CKLGATE_MASK in MXC_CCM_DDR */ + ldr r0, [r6, #0x98] + bic r0, r0, #0xC0000000 + str r0, [r6, #0x98] + + /* Check if XTAL can source the DDR. */ + ldr r0, =24000000 + cmp r4, r0 + ble databahn_ddr_24 + + /*Source DDR from PLL1. Setup the dividers accordingly. */ + ldr r0, =800000000 + ldr r3, =1 +Loop1: + sub r0, r0, r4 + cmp r0, r4 + blt Div_Found + add r3, r3, #1 + bgt Loop1 + +Div_Found: + ldr r0, [r6, #0x94] + bic r0, r0, #0x3f + orr r0, r0, r3 + str r0, [r6, #0x94] + /* Set the DDR to sourced from PLL1 in sync path */ + ldr r0, [r6, #0x90] + orr r0, r0, #0x3 + str r0, [r6, #0x90] + + /* Turn OFF the DDR_CKLGATE_MASK in MXC_CCM_DDR */ + ldr r0, [r6, #0x98] + bic r0, r0, #0xC0000000 + str r0, [r6, #0x98] + + ldr r0, =24000000 + cmp r4, r0 + beq databahn_ddr_24 + + b Ddr_not_24 + +databahn_ddr_24: + ldr r0, =0x00000003 + str r0, [r5, #0x08] + ldr r0, =0x000012c0 + str r0, [r5, #0x0c] + + ldr r0, =0x00000018 + str r0, [r5, #0x10] + ldr r0, =0x000000f0 + str r0, [r5, #0x14] + ldr r0, =0x02010b0c + str r0, [r5, #0x18] + ldr r0, =0x02020102 + str r0, [r5, #0x1c] + + ldr r0, =0x05010102 + str r0, [r5, #0x20] + ldr r0, =0x01000103 + str r0, [r5, #0x28] + ldr r0, =0x04030101 + str r0, [r5, #0x2c] + + ldr r0, =0x00000202 + str r0, [r5, #0x34] + ldr r0, =0x00000001 + str r0, [r5, #0x38] + ldr r0, =0x00000401 + str r0, [r5, #0x3c] + + ldr r0, =0x00050056 + str r0, [r5, #0x40] + ldr r0, =0x00040004 + str r0, [r5, #0x48] + + ldr r0, =0x00040022 + str r0, [r5, #0x6c] + + ldr r0, =0x00040022 + str r0, [r5, #0x78] + + ldr r0, =0x00180000 + str r0, [r5, #0x80] + ldr r0, =0x00000009 + str r0, [r5, #0x84] + ldr r0, =0x02400003 + str r0, [r5, #0x88] + ldr r0, =0x01000200 + str r0, [r5, #0x8c] + + ldr r0, =0x00000000 + str r0, [r5, #0xcc] + + ldr r0, =0x01000201 + str r0, [r5, #0xd0] + ldr r0, =0x01010301 + str r0, [r5, #0xd4] + ldr r0, =0x00000101 + str r0, [r5, #0xd8] + + ldr r0, =0x02000602 + str r0, [r5, #0x104] + ldr r0, =0x00560000 + str r0, [r5, #0x108] + ldr r0, =0x00560056 + str r0, [r5, #0x10c] + + ldr r0, =0x00560056 + str r0, [r5, #0x110] + ldr r0, =0x03060056 + str r0, [r5, #0x114] + + /* Set the Databahn DLL in bypass mode */ + /* PHY Register settings. */ + ldr r0, =0x00000100 + str r0, [r5, #0x200] + ldr r0, =0x000f1100 + str r0, [r5, #0x204] + ldr r0, =0xf3003a27 + str r0, [r5, #0x208] + ldr r0, =0x074002c1 + str r0, [r5, #0x20c] + + ldr r0, =0xf3003a27 + str r0, [r5, #0x210] + ldr r0, =0x074002c1 + str r0, [r5, #0x214] + ldr r0, =0xf3003a27 + str r0, [r5, #0x218] + ldr r0, =0x074002c1 + str r0, [r5, #0x21c] + + ldr r0, =0xf3003a27 + str r0, [r5, #0x220] + ldr r0, =0x074002c1 + str r0, [r5, #0x224] + ldr r0, =0xf3003a27 + str r0, [r5, #0x228] + ldr r0, =0x074002c1 + str r0, [r5, #0x22c] + + ldr r0, =0x00810004 + str r0, [r5, #0x234] + ldr r0, =0x30219f14 + str r0, [r5, #0x238] + ldr r0, =0x00219f01 + str r0, [r5, #0x23c] + + ldr r0, =0x30219f14 + str r0, [r5, #0x240] + ldr r0, =0x00219f01 + str r0, [r5, #0x244] + ldr r0, =0x30219f14 + str r0, [r5, #0x248] + ldr r0, =0x00219f01 + str r0, [r5, #0x24c] + + ldr r0, =0x30219f14 + str r0, [r5, #0x250] + ldr r0, =0x00219f01 + str r0, [r5, #0x254] + ldr r0, =0x30219f14 + str r0, [r5, #0x258] + ldr r0, =0x00219f01 + str r0, [r5, #0x25c] + + b Setup_Done + +Async_Mode: + /* Set the Databahn to async mode. */ + ldr r0, [r5, #0xdc] + and r0, r0, #0xfffcffff + str r0, [r5, #0xdc] + + /*Source DDR from PLL1. Setup the dividers accordingly. */ + ldr r0, =800000000 + ldr r3, =1 +Loop2: + sub r0, r0, r4 + cmp r0, r4 + blt Div_Found1 + add r3, r3, #1 + bgt Loop2 + +Div_Found1: + ldr r0, [r6, #0x98] + bic r0, r0, #0x3f + orr r0, r0, r3 + str r0, [r6, #0x98] + + /* Set the DDR to sourced from PLL1 in async path */ + ldr r0, [r6, #0x98] + bic r0, r0, #0x40 + str r0, [r6, #0x98] + + /* Turn ON the DDR_CKLGATE_MASK in MXC_CCM_DDR */ + ldr r0, [r6, #0x98] + orr r0, r0, #0x40000000 + str r0, [r6, #0x98] + + ldr r0, =24000000 + cmp r4, r0 + beq databahn_ddr_24 + +Ddr_not_24: + ldr r0, =0x0000001b + str r0, [r5, #0x8] + ldr r0, =0x0000d056 + str r0, [r5, #0xc] + + ldr r0, =0x0000010b + str r0, [r5, #0x10] + ldr r0, =0x00000a6b + str r0, [r5, #0x14] + ldr r0, =0x02020d0c + str r0, [r5, #0x18] + ldr r0, =0x0c110302 + str r0, [r5, #0x1c] + + ldr r0, =0x05020503 + str r0, [r5, #0x20] + ldr r0, =0x01000403 + str r0, [r5, #0x28] + ldr r0, =0x09040501 + str r0, [r5, #0x2c] + + ldr r0, =0x00000e02 + str r0, [r5, #0x34] + ldr r0, =0x00000006 + str r0, [r5, #0x38] + ldr r0, =0x00002301 + str r0, [r5, #0x3c] + + ldr r0, =0x00050408 + str r0, [r5, #0x40] + ldr r0, =0x00260026 + str r0, [r5, #0x48] + + ldr r0, =0x00040042 + str r0, [r5, #0x6c] + + ldr r0, =0x00040042 + str r0, [r5, #0x78] + + ldr r0, =0x010b0000 + str r0, [r5, #0x80] + ldr r0, =0x00000060 + str r0, [r5, #0x84] + ldr r0, =0x02400018 + str r0, [r5, #0x88] + ldr r0, =0x01000e00 + str r0, [r5, #0x8c] + + ldr r0, =0x01000000 + str r0, [r5, #0xcc] + + ldr r0, =0x01000201 + str r0, [r5, #0xd0] + ldr r0, =0x00000200 + str r0, [r5, #0xd4] + ldr r0, =0x00000102 + str r0, [r5, #0xd8] + + ldr r0, =0x02000802 + str r0, [r5, #0x104] + ldr r0, =0x04080000 + str r0, [r5, #0x108] + ldr r0, =0x04080408 + str r0, [r5, #0x10c] + + ldr r0, =0x04080408 + str r0, [r5, #0x110] + ldr r0, =0x03060408 + str r0, [r5, #0x114] + + /* PHY setting for 266MHz */ + ldr r0, =0x00000000 + str r0, [r5, #0x200] + ldr r0, =0x00000000 + str r0, [r5, #0x204] + ldr r0, =0xf5003a27 + str r0, [r5, #0x208] + + ldr r0, =0xf5003a27 + str r0, [r5, #0x210] + ldr r0, =0xf5003a27 + str r0, [r5, #0x218] + + ldr r0, =0xf5003a27 + str r0, [r5, #0x220] + ldr r0, =0xf5003a27 + str r0, [r5, #0x228] + + ldr r0, =0x074002e1 + str r0, [r5, #0x20c] + ldr r0, =0x074002e1 + str r0, [r5, #0x214] + ldr r0, =0x074002e1 + str r0, [r5, #0x21c] + ldr r0, =0x074002e1 + str r0, [r5, #0x224] + ldr r0, =0x074002e1 + str r0, [r5, #0x22c] + + ldr r0, =0x00810006 + str r0, [r5, #0x234] + ldr r0, =0x20099414 + str r0, [r5, #0x238] + ldr r0, =0x000a1401 + str r0, [r5, #0x23c] + + ldr r0, =0x20099414 + str r0, [r5, #0x240] + ldr r0, =0x000a1401 + str r0, [r5, #0x244] + ldr r0, =0x20099414 + str r0, [r5, #0x248] + ldr r0, =0x000a1401 + str r0, [r5, #0x24c] + + ldr r0, =0x20099414 + str r0, [r5, #0x250] + ldr r0, =0x000a1401 + str r0, [r5, #0x254] + ldr r0, =0x20099414 + str r0, [r5, #0x258] + ldr r0, =0x000a1401 + str r0, [r5, #0x25c] + + b Setup_Done + + +Setup_Done: + /* Start controller */ + ldr r0,[r5] + orr r0, r0,#0x1 + str r0,[r5] + + /* Poll the DLL lock state change in int_status reg*/ + /* DLL is bypassed in the 24MHz mode, so no waiting for DLL to lock. */ + ldr r0, =24000000 + cmp r4, r0 + beq Exit_Self_Refresh +DllLock: + ldr r0, [r5, #0xa8] + and r0, r0, #0x100 + ldr r2, =0x100 + cmp r0, r2 + bne DllLock + + /*Leave self-refresh mode */ +Exit_Self_Refresh: + ldr r0,[r5, #0x4c] + and r0,r0,#0xfffffffe + str r0,[r5, #0x4c] + +LoopCKE1: + /*Wait for CKE = 1 */ + ldr r0,[r5, #0xfc] + and r0, r0, #0x10000 + ldr r2, =0x10000 + cmp r0, r2 + bne LoopCKE1 + + /* Put the databahn back to into the LPM mode. */ + str r1,[r5, #0x50] + + /* Restore registers */ + ldmfd sp!, {r3,r4,r5,r6} + mov pc, lr + + .type mx50_do_ddr_freq_change, #object +ENTRY(mx50_do_ddr_freq_change) + .word mx50_ddr_freq_change + .size mx50_ddr_freq_change, . - mx50_ddr_freq_change diff --git a/arch/arm/mach-mx5/mx50_rdp.c b/arch/arm/mach-mx5/mx50_rdp.c new file mode 100644 index 000000000000..4a99419b265d --- /dev/null +++ b/arch/arm/mach-mx5/mx50_rdp.c @@ -0,0 +1,1186 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/nodemask.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/fsl_devices.h> +#include <linux/spi/spi.h> +#include <linux/i2c.h> +#include <linux/ata.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> +#include <linux/regulator/consumer.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/max17135.h> +#include <linux/pmic_external.h> +#include <linux/pmic_status.h> +#include <linux/videodev2.h> +#include <linux/mxcfb.h> +#include <linux/fec.h> +#include <linux/android_pmem.h> +#include <linux/usb/android.h> +#include <asm/irq.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/arc_otg.h> +#include <asm/mach/flash.h> +#include <asm/mach/keypad.h> +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/memory.h> +#include <mach/gpio.h> +#include <mach/mmc.h> +#include <mach/mxc_dvfs.h> +#include <mach/iomux-mx50.h> + +#include "devices.h" +#include "usb.h" +#include "crm_regs.h" + +#define SD1_WP (3*32 + 19) /*GPIO_4_19 */ +#define SD1_CD (0*32 + 27) /*GPIO_1_27 */ +#define SD2_WP (4*32 + 16) /*GPIO_5_16 */ +#define SD2_CD (4*32 + 17) /*GPIO_5_17 */ +#define HP_DETECT (3*32 + 15) /*GPIO_4_15 */ +#define PWR_INT (3*32 + 18) /*GPIO_4_18 */ + +#define EPDC_D0 (2*32 + 1) /*GPIO_3_0 */ +#define EPDC_D1 (2*32 + 2) /*GPIO_3_1 */ +#define EPDC_D2 (2*32 + 3) /*GPIO_3_2 */ +#define EPDC_D3 (2*32 + 4) /*GPIO_3_3 */ +#define EPDC_D4 (2*32 + 5) /*GPIO_3_4 */ +#define EPDC_D5 (2*32 + 6) /*GPIO_3_5 */ +#define EPDC_D6 (2*32 + 7) /*GPIO_3_6 */ +#define EPDC_D7 (2*32 + 8) /*GPIO_3_7 */ +#define EPDC_GDCLK (2*32 + 16) /*GPIO_3_16 */ +#define EPDC_GDSP (2*32 + 17) /*GPIO_3_17 */ +#define EPDC_GDOE (2*32 + 18) /*GPIO_3_18 */ +#define EPDC_GDRL (2*32 + 19) /*GPIO_3_19 */ +#define EPDC_SDCLK (2*32 + 20) /*GPIO_3_20 */ +#define EPDC_SDOE (2*32 + 23) /*GPIO_3_23 */ +#define EPDC_SDLE (2*32 + 24) /*GPIO_3_24 */ +#define EPDC_SDSHR (2*32 + 26) /*GPIO_3_26 */ +#define EPDC_BDR0 (3*32 + 23) /*GPIO_4_23 */ +#define EPDC_SDCE0 (3*32 + 25) /*GPIO_4_25 */ +#define EPDC_SDCE1 (3*32 + 26) /*GPIO_4_26 */ +#define EPDC_SDCE2 (3*32 + 27) /*GPIO_4_27 */ + +#define EPDC_PMIC_WAKE (5*32 + 16) /*GPIO_6_16 */ +#define EPDC_PMIC_INT (5*32 + 17) /*GPIO_6_17 */ +#define EPDC_VCOM (3*32 + 21) /*GPIO_4_21 */ +#define EPDC_PWRSTAT (2*32 + 28) /*GPIO_3_28 */ +#define EPDC_ELCDIF_BACKLIGHT (1*32 + 18) /*GPIO_2_18 */ +#define CSPI_CS1 (3*32 + 13) /*GPIO_4_13 */ +#define CSPI_CS2 (3*32 + 11) /*GPIO_4_11*/ +#define SGTL_OSCEN (5*32 + 8) /*GPIO_6_8*/ +#define FEC_EN (5*32 + 23) /*GPIO_6_23*/ +#define FEC_RESET_B (3*32 + 12) /*GPIO_4_12*/ + +extern int __init mx50_rdp_init_mc13892(void); +extern struct cpu_wp *(*get_cpu_wp)(int *wp); +extern void (*set_num_cpu_wp)(int num); +static int num_cpu_wp = 2; + +static struct pad_desc mx50_rdp[] = { + /* SD1 */ + MX50_PAD_ECSPI2_SS0__GPIO_4_19, + MX50_PAD_EIM_CRE__GPIO_1_27, + MX50_PAD_SD1_CMD__SD1_CMD, + + MX50_PAD_SD1_CLK__SD1_CLK, + MX50_PAD_SD1_D0__SD1_D0, + MX50_PAD_SD1_D1__SD1_D1, + MX50_PAD_SD1_D2__SD1_D2, + MX50_PAD_SD1_D3__SD1_D3, + + /* SD2 */ + MX50_PAD_SD2_CD__GPIO_5_17, + MX50_PAD_SD2_WP__GPIO_5_16, + MX50_PAD_SD2_CMD__SD2_CMD, + MX50_PAD_SD2_CLK__SD2_CLK, + MX50_PAD_SD2_D0__SD2_D0, + MX50_PAD_SD2_D1__SD2_D1, + MX50_PAD_SD2_D2__SD2_D2, + MX50_PAD_SD2_D3__SD2_D3, + MX50_PAD_SD2_D4__SD2_D4, + MX50_PAD_SD2_D5__SD2_D5, + MX50_PAD_SD2_D6__SD2_D6, + MX50_PAD_SD2_D7__SD2_D7, + + /* SD3 */ + MX50_PAD_SD3_CMD__SD3_CMD, + MX50_PAD_SD3_CLK__SD3_CLK, + MX50_PAD_SD3_D0__SD3_D0, + MX50_PAD_SD3_D1__SD3_D1, + MX50_PAD_SD3_D2__SD3_D2, + MX50_PAD_SD3_D3__SD3_D3, + MX50_PAD_SD3_D4__SD3_D4, + MX50_PAD_SD3_D5__SD3_D5, + MX50_PAD_SD3_D6__SD3_D6, + MX50_PAD_SD3_D7__SD3_D7, + + MX50_PAD_SSI_RXD__SSI_RXD, + MX50_PAD_SSI_TXD__SSI_TXD, + MX50_PAD_SSI_TXC__SSI_TXC, + MX50_PAD_SSI_TXFS__SSI_TXFS, + + /* HP_DET_B (headphone detect) */ + MX50_PAD_ECSPI1_SS0__GPIO_4_15, + + /* PWR_INT */ + MX50_PAD_ECSPI2_MISO__GPIO_4_18, + + /* UART pad setting */ + MX50_PAD_UART1_TXD__UART1_TXD, + MX50_PAD_UART1_RXD__UART1_RXD, + MX50_PAD_UART1_RTS__UART1_RTS, + MX50_PAD_UART2_TXD__UART2_TXD, + MX50_PAD_UART2_RXD__UART2_RXD, + MX50_PAD_UART2_CTS__UART2_CTS, + MX50_PAD_UART2_RTS__UART2_RTS, + + MX50_PAD_I2C1_SCL__I2C1_SCL, + MX50_PAD_I2C1_SDA__I2C1_SDA, + MX50_PAD_I2C2_SCL__I2C2_SCL, + MX50_PAD_I2C2_SDA__I2C2_SDA, + + /* EPDC pins */ + MX50_PAD_EPDC_D0__EPDC_D0, + MX50_PAD_EPDC_D1__EPDC_D1, + MX50_PAD_EPDC_D2__EPDC_D2, + MX50_PAD_EPDC_D3__EPDC_D3, + MX50_PAD_EPDC_D4__EPDC_D4, + MX50_PAD_EPDC_D5__EPDC_D5, + MX50_PAD_EPDC_D6__EPDC_D6, + MX50_PAD_EPDC_D7__EPDC_D7, + MX50_PAD_EPDC_GDCLK__EPDC_GDCLK, + MX50_PAD_EPDC_GDSP__EPDC_GDSP, + MX50_PAD_EPDC_GDOE__EPDC_GDOE , + MX50_PAD_EPDC_GDRL__EPDC_GDRL, + MX50_PAD_EPDC_SDCLK__EPDC_SDCLK, + MX50_PAD_EPDC_SDOE__EPDC_SDOE, + MX50_PAD_EPDC_SDLE__EPDC_SDLE, + MX50_PAD_EPDC_SDSHR__EPDC_SDSHR, + MX50_PAD_EPDC_BDR0__EPDC_BDR0, + MX50_PAD_EPDC_SDCE0__EPDC_SDCE0, + MX50_PAD_EPDC_SDCE1__EPDC_SDCE1, + MX50_PAD_EPDC_SDCE2__EPDC_SDCE2, + + MX50_PAD_EPDC_PWRSTAT__GPIO_3_28, + MX50_PAD_EPDC_VCOM0__GPIO_4_21, + + MX50_PAD_DISP_D8__DISP_D8, + MX50_PAD_DISP_D9__DISP_D9, + MX50_PAD_DISP_D10__DISP_D10, + MX50_PAD_DISP_D11__DISP_D11, + MX50_PAD_DISP_D12__DISP_D12, + MX50_PAD_DISP_D13__DISP_D13, + MX50_PAD_DISP_D14__DISP_D14, + MX50_PAD_DISP_D15__DISP_D15, + MX50_PAD_DISP_RS__ELCDIF_VSYNC, + + /* ELCDIF contrast */ + MX50_PAD_DISP_BUSY__GPIO_2_18, + + MX50_PAD_DISP_CS__ELCDIF_HSYNC, + MX50_PAD_DISP_RD__ELCDIF_EN, + MX50_PAD_DISP_WR__ELCDIF_PIXCLK, + + /* EPD PMIC WAKEUP */ + MX50_PAD_UART4_TXD__GPIO_6_16, + + /* EPD PMIC intr */ + MX50_PAD_UART4_RXD__GPIO_6_17, + + MX50_PAD_EPITO__USBH1_PWR, + /* Need to comment below line if + * one needs to debug owire. + */ + MX50_PAD_OWIRE__USBH1_OC, + MX50_PAD_PWM2__USBOTG_PWR, + MX50_PAD_I2C3_SCL__USBOTG_OC, + + MX50_PAD_SSI_RXC__FEC_MDIO, + MX50_PAD_SSI_RXC__FEC_MDIO, + MX50_PAD_DISP_D0__FEC_TXCLK, + MX50_PAD_DISP_D1__FEC_RX_ER, + MX50_PAD_DISP_D2__FEC_RX_DV, + MX50_PAD_DISP_D3__FEC_RXD1, + MX50_PAD_DISP_D4__FEC_RXD0, + MX50_PAD_DISP_D5__FEC_TX_EN, + MX50_PAD_DISP_D6__FEC_TXD1, + MX50_PAD_DISP_D7__FEC_TXD0, + MX50_PAD_SSI_RXFS__FEC_MDC, + MX50_PAD_I2C3_SDA__GPIO_6_23, + MX50_PAD_ECSPI1_SCLK__GPIO_4_12, + + MX50_PAD_CSPI_SS0__CSPI_SS0, + MX50_PAD_ECSPI1_MOSI__CSPI_SS1, + MX50_PAD_CSPI_MOSI__CSPI_MOSI, + MX50_PAD_CSPI_MISO__CSPI_MISO, + + /* SGTL500_OSC_EN */ + MX50_PAD_UART1_CTS__GPIO_6_8, + + /* Keypad */ + MX50_PAD_KEY_COL0__KEY_COL0, + MX50_PAD_KEY_ROW0__KEY_ROW0, + MX50_PAD_KEY_COL1__KEY_COL1, + MX50_PAD_KEY_ROW1__KEY_ROW1, + MX50_PAD_KEY_COL2__KEY_COL2, + MX50_PAD_KEY_ROW2__KEY_ROW2, + +}; + +static struct mxc_dvfs_platform_data dvfs_core_data = { + .reg_id = "SW1", + .clk1_id = "cpu_clk", + .clk2_id = "gpc_dvfs_clk", + .gpc_cntr_offset = MXC_GPC_CNTR_OFFSET, + .gpc_vcr_offset = MXC_GPC_VCR_OFFSET, + .ccm_cdcr_offset = MXC_CCM_CDCR_OFFSET, + .ccm_cacrr_offset = MXC_CCM_CACRR_OFFSET, + .ccm_cdhipr_offset = MXC_CCM_CDHIPR_OFFSET, + .prediv_mask = 0x1F800, + .prediv_offset = 11, + .prediv_val = 3, + .div3ck_mask = 0xE0000000, + .div3ck_offset = 29, + .div3ck_val = 2, + .emac_val = 0x08, + .upthr_val = 25, + .dnthr_val = 9, + .pncthr_val = 33, + .upcnt_val = 10, + .dncnt_val = 10, + .delay_time = 30, + .num_wp = 2, +}; + +/* working point(wp): 0 - 800MHz; 1 - 166.25MHz; */ +static struct cpu_wp cpu_wp_auto[] = { + { + .pll_rate = 800000000, + .cpu_rate = 800000000, + .pdf = 0, + .mfi = 8, + .mfd = 2, + .mfn = 1, + .cpu_podf = 0, + .cpu_voltage = 1050000,}, + { + .pll_rate = 800000000, + .cpu_rate = 160000000, + .pdf = 4, + .mfi = 8, + .mfd = 2, + .mfn = 1, + .cpu_podf = 4, + .cpu_voltage = 850000,}, +}; + +static struct cpu_wp *mx50_rdp_get_cpu_wp(int *wp) +{ + *wp = num_cpu_wp; + return cpu_wp_auto; +} + +static void mx50_rdp_set_num_cpu_wp(int num) +{ + num_cpu_wp = num; + return; +} + +static struct mxc_w1_config mxc_w1_data = { + .search_rom_accelerator = 1, +}; + +static struct fec_platform_data fec_data = { + .phy = PHY_INTERFACE_MODE_RMII, + .phy_mask = ~1UL, +}; + +static u16 keymapping[8] = { + KEY_F1, KEY_UP, KEY_SELECT, KEY_LEFT, + KEY_ENTER, KEY_RIGHT, KEY_MENU, KEY_DOWN, +}; + +static struct keypad_data keypad_plat_data = { + .rowmax = 3, + .colmax = 3, + .irq = MXC_INT_KPP, + .learning = 0, + .delay = 2, + .matrix = keymapping, +}; + + +/* workaround for cspi chipselect pin may not keep correct level when idle */ +static void mx50_rdp_gpio_spi_chipselect_active(int cspi_mode, int status, + int chipselect) +{ + switch (cspi_mode) { + case 1: + break; + case 2: + break; + case 3: + switch (chipselect) { + case 0x1: + { + struct pad_desc cspi_ss0 = MX50_PAD_CSPI_SS0__CSPI_SS0; + struct pad_desc cspi_cs1 = + MX50_PAD_ECSPI1_MOSI__GPIO_4_13; + + /* pull up/down deassert it */ + mxc_iomux_v3_setup_pad(&cspi_ss0); + mxc_iomux_v3_setup_pad(&cspi_cs1); + + gpio_request(CSPI_CS1, "cspi-cs1"); + gpio_direction_input(CSPI_CS1); + } + break; + case 0x2: + { + struct pad_desc cspi_ss1 = + MX50_PAD_ECSPI1_MOSI__CSPI_SS1; + struct pad_desc cspi_ss0 = MX50_PAD_CSPI_SS0__GPIO_4_11; + + /*disable other ss */ + mxc_iomux_v3_setup_pad(&cspi_ss1); + mxc_iomux_v3_setup_pad(&cspi_ss0); + + /* pull up/down deassert it */ + gpio_request(CSPI_CS2, "cspi-cs2"); + gpio_direction_input(CSPI_CS2); + } + break; + default: + break; + } + break; + + default: + break; + } +} + +static void mx50_arm2_usb_set_vbus(bool enable) +{ + printk(KERN_DEBUG "%s, enable is %d\n", __func__, enable); + if (enable) + USBCTRL |= UCTRL_O_PWR_POL; + else + USBCTRL &= ~UCTRL_O_PWR_POL; +} + +static void mx50_rdp_gpio_spi_chipselect_inactive(int cspi_mode, int status, + int chipselect) +{ + switch (cspi_mode) { + case 1: + break; + case 2: + break; + case 3: + switch (chipselect) { + case 0x1: + gpio_free(CSPI_CS1); + break; + case 0x2: + gpio_free(CSPI_CS2); + break; + default: + break; + } + break; + default: + break; + } + +} + +static struct mxc_spi_master mxcspi1_data = { + .maxchipselect = 4, + .spi_version = 23, + .chipselect_active = mx50_rdp_gpio_spi_chipselect_active, + .chipselect_inactive = mx50_rdp_gpio_spi_chipselect_inactive, +}; + +static struct mxc_spi_master mxcspi3_data = { + .maxchipselect = 4, + .spi_version = 7, + .chipselect_active = mx50_rdp_gpio_spi_chipselect_active, + .chipselect_inactive = mx50_rdp_gpio_spi_chipselect_inactive, +}; + +static struct mxc_i2c_platform_data mxci2c_data = { + .i2c_clk = 100000, +}; + +static struct mxc_srtc_platform_data srtc_data = { + .srtc_sec_mode_addr = OCOTP_CTRL_BASE_ADDR + 0x80, +}; + +#define mV_to_uV(mV) (mV * 1000) +#define uV_to_mV(uV) (uV / 1000) +#define V_to_uV(V) (mV_to_uV(V * 1000)) +#define uV_to_V(uV) (uV_to_mV(uV) / 1000) + +static struct regulator_init_data max17135_init_data[] __initdata = { + { + .constraints = { + .name = "DISPLAY", + }, + }, { + .constraints = { + .name = "GVDD", + .min_uV = V_to_uV(20), + .max_uV = V_to_uV(20), + }, + }, { + .constraints = { + .name = "GVEE", + .min_uV = V_to_uV(-22), + .max_uV = V_to_uV(-22), + }, + }, { + .constraints = { + .name = "HVINN", + .min_uV = V_to_uV(-22), + .max_uV = V_to_uV(-22), + }, + }, { + .constraints = { + .name = "HVINP", + .min_uV = V_to_uV(20), + .max_uV = V_to_uV(20), + }, + }, { + .constraints = { + .name = "VCOM", + .min_uV = mV_to_uV(-4325), + .max_uV = mV_to_uV(-500), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + }, { + .constraints = { + .name = "VNEG", + .min_uV = V_to_uV(-15), + .max_uV = V_to_uV(-15), + }, + }, { + .constraints = { + .name = "VPOS", + .min_uV = V_to_uV(15), + .max_uV = V_to_uV(15), + }, + }, +}; + +static void epdc_get_pins(void) +{ + /* Claim GPIOs for EPDC pins - used during power up/down */ + gpio_request(EPDC_D0, "epdc_d0"); + gpio_request(EPDC_D1, "epdc_d1"); + gpio_request(EPDC_D2, "epdc_d2"); + gpio_request(EPDC_D3, "epdc_d3"); + gpio_request(EPDC_D4, "epdc_d4"); + gpio_request(EPDC_D5, "epdc_d5"); + gpio_request(EPDC_D6, "epdc_d6"); + gpio_request(EPDC_D7, "epdc_d7"); + gpio_request(EPDC_GDCLK, "epdc_gdclk"); + gpio_request(EPDC_GDSP, "epdc_gdsp"); + gpio_request(EPDC_GDOE, "epdc_gdoe"); + gpio_request(EPDC_GDRL, "epdc_gdrl"); + gpio_request(EPDC_SDCLK, "epdc_sdclk"); + gpio_request(EPDC_SDOE, "epdc_sdoe"); + gpio_request(EPDC_SDLE, "epdc_sdle"); + gpio_request(EPDC_SDSHR, "epdc_sdshr"); + gpio_request(EPDC_BDR0, "epdc_bdr0"); + gpio_request(EPDC_SDCE0, "epdc_sdce0"); + gpio_request(EPDC_SDCE1, "epdc_sdce1"); + gpio_request(EPDC_SDCE2, "epdc_sdce2"); +} + +static void epdc_put_pins(void) +{ + gpio_free(EPDC_D0); + gpio_free(EPDC_D1); + gpio_free(EPDC_D2); + gpio_free(EPDC_D3); + gpio_free(EPDC_D4); + gpio_free(EPDC_D5); + gpio_free(EPDC_D6); + gpio_free(EPDC_D7); + gpio_free(EPDC_GDCLK); + gpio_free(EPDC_GDSP); + gpio_free(EPDC_GDOE); + gpio_free(EPDC_GDRL); + gpio_free(EPDC_SDCLK); + gpio_free(EPDC_SDOE); + gpio_free(EPDC_SDLE); + gpio_free(EPDC_SDSHR); + gpio_free(EPDC_BDR0); + gpio_free(EPDC_SDCE0); + gpio_free(EPDC_SDCE1); + gpio_free(EPDC_SDCE2); +} + +static void epdc_enable_pins(void) +{ + struct pad_desc epdc_d0 = MX50_PAD_EPDC_D0__EPDC_D0; + struct pad_desc epdc_d1 = MX50_PAD_EPDC_D1__EPDC_D1; + struct pad_desc epdc_d2 = MX50_PAD_EPDC_D2__EPDC_D2; + struct pad_desc epdc_d3 = MX50_PAD_EPDC_D3__EPDC_D3; + struct pad_desc epdc_d4 = MX50_PAD_EPDC_D4__EPDC_D4; + struct pad_desc epdc_d5 = MX50_PAD_EPDC_D5__EPDC_D5; + struct pad_desc epdc_d6 = MX50_PAD_EPDC_D6__EPDC_D6; + struct pad_desc epdc_d7 = MX50_PAD_EPDC_D7__EPDC_D7; + struct pad_desc epdc_gdclk = MX50_PAD_EPDC_GDCLK__EPDC_GDCLK; + struct pad_desc epdc_gdsp = MX50_PAD_EPDC_GDSP__EPDC_GDSP; + struct pad_desc epdc_gdoe = MX50_PAD_EPDC_GDOE__EPDC_GDOE; + struct pad_desc epdc_gdrl = MX50_PAD_EPDC_GDRL__EPDC_GDRL; + struct pad_desc epdc_sdclk = MX50_PAD_EPDC_SDCLK__EPDC_SDCLK; + struct pad_desc epdc_sdoe = MX50_PAD_EPDC_SDOE__EPDC_SDOE; + struct pad_desc epdc_sdle = MX50_PAD_EPDC_SDLE__EPDC_SDLE; + struct pad_desc epdc_sdshr = MX50_PAD_EPDC_SDSHR__EPDC_SDSHR; + struct pad_desc epdc_bdr0 = MX50_PAD_EPDC_BDR0__EPDC_BDR0; + struct pad_desc epdc_sdce0 = MX50_PAD_EPDC_SDCE0__EPDC_SDCE0; + struct pad_desc epdc_sdce1 = MX50_PAD_EPDC_SDCE1__EPDC_SDCE1; + struct pad_desc epdc_sdce2 = MX50_PAD_EPDC_SDCE2__EPDC_SDCE2; + + /* Configure MUX settings to enable EPDC use */ + mxc_iomux_v3_setup_pad(&epdc_d0); + mxc_iomux_v3_setup_pad(&epdc_d1); + mxc_iomux_v3_setup_pad(&epdc_d2); + mxc_iomux_v3_setup_pad(&epdc_d3); + mxc_iomux_v3_setup_pad(&epdc_d4); + mxc_iomux_v3_setup_pad(&epdc_d5); + mxc_iomux_v3_setup_pad(&epdc_d6); + mxc_iomux_v3_setup_pad(&epdc_d7); + mxc_iomux_v3_setup_pad(&epdc_gdclk); + mxc_iomux_v3_setup_pad(&epdc_gdsp); + mxc_iomux_v3_setup_pad(&epdc_gdoe); + mxc_iomux_v3_setup_pad(&epdc_gdrl); + mxc_iomux_v3_setup_pad(&epdc_sdclk); + mxc_iomux_v3_setup_pad(&epdc_sdoe); + mxc_iomux_v3_setup_pad(&epdc_sdle); + mxc_iomux_v3_setup_pad(&epdc_sdshr); + mxc_iomux_v3_setup_pad(&epdc_bdr0); + mxc_iomux_v3_setup_pad(&epdc_sdce0); + mxc_iomux_v3_setup_pad(&epdc_sdce1); + mxc_iomux_v3_setup_pad(&epdc_sdce2); + + gpio_direction_input(EPDC_D0); + gpio_direction_input(EPDC_D1); + gpio_direction_input(EPDC_D2); + gpio_direction_input(EPDC_D3); + gpio_direction_input(EPDC_D4); + gpio_direction_input(EPDC_D5); + gpio_direction_input(EPDC_D6); + gpio_direction_input(EPDC_D7); + gpio_direction_input(EPDC_GDCLK); + gpio_direction_input(EPDC_GDSP); + gpio_direction_input(EPDC_GDOE); + gpio_direction_input(EPDC_GDRL); + gpio_direction_input(EPDC_SDCLK); + gpio_direction_input(EPDC_SDOE); + gpio_direction_input(EPDC_SDLE); + gpio_direction_input(EPDC_SDSHR); + gpio_direction_input(EPDC_BDR0); + gpio_direction_input(EPDC_SDCE0); + gpio_direction_input(EPDC_SDCE1); + gpio_direction_input(EPDC_SDCE2); +} + +static void epdc_disable_pins(void) +{ + struct pad_desc epdc_d0 = MX50_PAD_EPDC_D0__GPIO_3_0; + struct pad_desc epdc_d1 = MX50_PAD_EPDC_D1__GPIO_3_1; + struct pad_desc epdc_d2 = MX50_PAD_EPDC_D2__GPIO_3_2; + struct pad_desc epdc_d3 = MX50_PAD_EPDC_D3__GPIO_3_3; + struct pad_desc epdc_d4 = MX50_PAD_EPDC_D4__GPIO_3_4; + struct pad_desc epdc_d5 = MX50_PAD_EPDC_D5__GPIO_3_5; + struct pad_desc epdc_d6 = MX50_PAD_EPDC_D6__GPIO_3_6; + struct pad_desc epdc_d7 = MX50_PAD_EPDC_D7__GPIO_3_7; + struct pad_desc epdc_gdclk = MX50_PAD_EPDC_GDCLK__GPIO_3_16; + struct pad_desc epdc_gdsp = MX50_PAD_EPDC_GDSP__GPIO_3_17; + struct pad_desc epdc_gdoe = MX50_PAD_EPDC_GDOE__GPIO_3_18; + struct pad_desc epdc_gdrl = MX50_PAD_EPDC_GDRL__GPIO_3_19; + struct pad_desc epdc_sdclk = MX50_PAD_EPDC_SDCLK__GPIO_3_20; + struct pad_desc epdc_sdoe = MX50_PAD_EPDC_SDOE__GPIO_3_23; + struct pad_desc epdc_sdle = MX50_PAD_EPDC_SDLE__GPIO_3_24; + struct pad_desc epdc_sdshr = MX50_PAD_EPDC_SDSHR__GPIO_3_26; + struct pad_desc epdc_bdr0 = MX50_PAD_EPDC_BDR0__GPIO_4_23; + struct pad_desc epdc_sdce0 = MX50_PAD_EPDC_SDCE0__GPIO_4_25; + struct pad_desc epdc_sdce1 = MX50_PAD_EPDC_SDCE1__GPIO_4_26; + struct pad_desc epdc_sdce2 = MX50_PAD_EPDC_SDCE2__GPIO_4_27; + + /* Configure MUX settings for EPDC pins to + * GPIO and drive to 0. */ + mxc_iomux_v3_setup_pad(&epdc_d0); + mxc_iomux_v3_setup_pad(&epdc_d1); + mxc_iomux_v3_setup_pad(&epdc_d2); + mxc_iomux_v3_setup_pad(&epdc_d3); + mxc_iomux_v3_setup_pad(&epdc_d4); + mxc_iomux_v3_setup_pad(&epdc_d5); + mxc_iomux_v3_setup_pad(&epdc_d6); + mxc_iomux_v3_setup_pad(&epdc_d7); + mxc_iomux_v3_setup_pad(&epdc_gdclk); + mxc_iomux_v3_setup_pad(&epdc_gdsp); + mxc_iomux_v3_setup_pad(&epdc_gdoe); + mxc_iomux_v3_setup_pad(&epdc_gdrl); + mxc_iomux_v3_setup_pad(&epdc_sdclk); + mxc_iomux_v3_setup_pad(&epdc_sdoe); + mxc_iomux_v3_setup_pad(&epdc_sdle); + mxc_iomux_v3_setup_pad(&epdc_sdshr); + mxc_iomux_v3_setup_pad(&epdc_bdr0); + mxc_iomux_v3_setup_pad(&epdc_sdce0); + mxc_iomux_v3_setup_pad(&epdc_sdce1); + mxc_iomux_v3_setup_pad(&epdc_sdce2); + + gpio_direction_output(EPDC_D0, 0); + gpio_direction_output(EPDC_D1, 0); + gpio_direction_output(EPDC_D2, 0); + gpio_direction_output(EPDC_D3, 0); + gpio_direction_output(EPDC_D4, 0); + gpio_direction_output(EPDC_D5, 0); + gpio_direction_output(EPDC_D6, 0); + gpio_direction_output(EPDC_D7, 0); + gpio_direction_output(EPDC_GDCLK, 0); + gpio_direction_output(EPDC_GDSP, 0); + gpio_direction_output(EPDC_GDOE, 0); + gpio_direction_output(EPDC_GDRL, 0); + gpio_direction_output(EPDC_SDCLK, 0); + gpio_direction_output(EPDC_SDOE, 0); + gpio_direction_output(EPDC_SDLE, 0); + gpio_direction_output(EPDC_SDSHR, 0); + gpio_direction_output(EPDC_BDR0, 0); + gpio_direction_output(EPDC_SDCE0, 0); + gpio_direction_output(EPDC_SDCE1, 0); + gpio_direction_output(EPDC_SDCE2, 0); +} + +static struct fb_videomode e60_mode = { + .name = "E60", + .refresh = 50, + .xres = 800, + .yres = 600, + .pixclock = 20000000, + .left_margin = 10, + .right_margin = 217, + .upper_margin = 4, + .lower_margin = 10, + .hsync_len = 20, + .vsync_len = 4, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, +}; + +static struct fb_videomode e97_mode = { + .name = "E97", + .refresh = 50, + .xres = 1200, + .yres = 825, + .pixclock = 32000000, + .left_margin = 8, + .right_margin = 125, + .upper_margin = 4, + .lower_margin = 17, + .hsync_len = 20, + .vsync_len = 4, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, +}; + +static struct mxc_epdc_fb_mode panel_modes[] = { + { + &e60_mode, + 4, 10, 20, 10, 20, 480, 20, 0, 1, 1, + }, + { + &e97_mode, + 8, 10, 20, 10, 20, 580, 20, 0, 1, 3, + }, +}; + +static struct mxc_epdc_fb_platform_data epdc_data = { + .epdc_mode = panel_modes, + .num_modes = ARRAY_SIZE(panel_modes), + .get_pins = epdc_get_pins, + .put_pins = epdc_put_pins, + .enable_pins = epdc_enable_pins, + .disable_pins = epdc_disable_pins, +}; + +static struct max17135_platform_data max17135_pdata __initdata = { + .vneg_pwrup = 1, + .gvee_pwrup = 1, + .vpos_pwrup = 2, + .gvdd_pwrup = 1, + .gvdd_pwrdn = 1, + .vpos_pwrdn = 2, + .gvee_pwrdn = 1, + .vneg_pwrdn = 1, + .gpio_pmic_pwrgood = EPDC_PWRSTAT, + .gpio_pmic_vcom_ctrl = EPDC_VCOM, + .gpio_pmic_wakeup = EPDC_PMIC_WAKE, + .gpio_pmic_intr = EPDC_PMIC_INT, + .regulator_init = max17135_init_data, + .pass_num = 1, + .vcom_uV = -1250000, +}; + +static struct i2c_board_info mxc_i2c0_board_info[] __initdata = { + { + I2C_BOARD_INFO("max17135", 0x48), + .platform_data = &max17135_pdata, + }, + { + .type = "accelerometer", + .addr = 0x1c, + }, + { + .type = "eeprom", + .addr = 0x50, + }, +}; + +static struct i2c_board_info mxc_i2c1_board_info[] __initdata = { + { + .type = "sgtl5000-i2c", + .addr = 0x0a, + }, +}; + +static struct mtd_partition mxc_dataflash_partitions[] = { + { + .name = "bootloader", + .offset = 0, + .size = 0x000100000,}, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL,}, +}; + +static struct flash_platform_data mxc_spi_flash_data[] = { + { + .name = "mxc_dataflash", + .parts = mxc_dataflash_partitions, + .nr_parts = ARRAY_SIZE(mxc_dataflash_partitions), + .type = "at45db321d",} +}; + + +static struct spi_board_info mxc_dataflash_device[] __initdata = { + { + .modalias = "mxc_dataflash", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 3, + .chip_select = 1, + .platform_data = &mxc_spi_flash_data[0],}, +}; + +static int sdhc_write_protect(struct device *dev) +{ + unsigned short rc = 0; + + if (to_platform_device(dev)->id == 0) + rc = gpio_get_value(SD1_WP); + else if (to_platform_device(dev)->id == 1) + rc = gpio_get_value(SD2_WP); + else if (to_platform_device(dev)->id == 2) + rc = 0; + + return rc; +} + +static unsigned int sdhc_get_card_det_status(struct device *dev) +{ + int ret = 0; + if (to_platform_device(dev)->id == 0) + ret = gpio_get_value(SD1_CD); + else if (to_platform_device(dev)->id == 1) + ret = gpio_get_value(SD2_CD); + else if (to_platform_device(dev)->id == 2) + ret = 1; + + return ret; +} + +static struct mxc_mmc_platform_data mmc1_data = { + .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 + | MMC_VDD_31_32, + .caps = MMC_CAP_4_BIT_DATA, + .min_clk = 400000, + .max_clk = 50000000, + .card_inserted_state = 0, + .status = sdhc_get_card_det_status, + .wp_status = sdhc_write_protect, + .clock_mmc = "esdhc_clk", + .power_mmc = NULL, +}; + +static struct mxc_mmc_platform_data mmc2_data = { + .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 + | MMC_VDD_31_32, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .min_clk = 400000, + .max_clk = 50000000, + .card_inserted_state = 0, + .status = sdhc_get_card_det_status, + .wp_status = sdhc_write_protect, + .clock_mmc = "esdhc_clk", +}; + +static struct mxc_mmc_platform_data mmc3_data = { + .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 + | MMC_VDD_31_32, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .min_clk = 400000, + .max_clk = 50000000, + .card_inserted_state = 0, + .status = sdhc_get_card_det_status, + .wp_status = sdhc_write_protect, + .clock_mmc = "esdhc_clk", +}; + +static int mxc_sgtl5000_amp_enable(int enable) +{ +/* TO DO */ + return 0; +} + +static int headphone_det_status(void) +{ + return (gpio_get_value(HP_DETECT) != 0); +} + +static struct mxc_audio_platform_data sgtl5000_data = { + .ssi_num = 1, + .src_port = 2, + .ext_port = 3, + .hp_irq = IOMUX_TO_IRQ_V3(HP_DETECT), + .hp_status = headphone_det_status, + .amp_enable = mxc_sgtl5000_amp_enable, + .sysclk = 12288000, +}; + +static struct platform_device mxc_sgtl5000_device = { + .name = "imx-3stack-sgtl5000", +}; + +static struct pad_desc rdp_wvga_pads[] = { + MX50_PAD_DISP_D0__DISP_D0, + MX50_PAD_DISP_D1__DISP_D1, + MX50_PAD_DISP_D2__DISP_D2, + MX50_PAD_DISP_D3__DISP_D3, + MX50_PAD_DISP_D4__DISP_D4, + MX50_PAD_DISP_D5__DISP_D5, + MX50_PAD_DISP_D6__DISP_D6, + MX50_PAD_DISP_D7__DISP_D7, +}; + +static void wvga_reset(void) +{ + mxc_iomux_v3_setup_multiple_pads(rdp_wvga_pads, \ + ARRAY_SIZE(rdp_wvga_pads)); + return; +} + +static struct mxc_lcd_platform_data lcd_wvga_data = { + .reset = wvga_reset, +}; + +static struct platform_device lcd_wvga_device = { + .name = "lcd_claa", + .dev = { + .platform_data = &lcd_wvga_data, + }, +}; + +static struct fb_videomode video_modes[] = { + { + /* 800x480 @ 57 Hz , pixel clk @ 27MHz */ + "CLAA-WVGA", 57, 800, 480, 37037, 40, 60, 10, 10, 20, 10, + FB_SYNC_CLK_LAT_FALL, + FB_VMODE_NONINTERLACED, + 0,}, +}; + +static struct mxc_fb_platform_data fb_data[] = { + { + .interface_pix_fmt = V4L2_PIX_FMT_RGB565, + .mode_str = "CLAA-WVGA", + .mode = video_modes, + .num_modes = ARRAY_SIZE(video_modes), + }, +}; + +static int __initdata enable_w1 = { 0 }; +static int __init w1_setup(char *__unused) +{ + enable_w1 = 1; + return cpu_is_mx50(); +} + +__setup("w1", w1_setup); + +static struct android_pmem_platform_data android_pmem_pdata = { + .name = "pmem_adsp", + .start = 0, + .size = SZ_4M, + .no_allocator = 0, + .cached = PMEM_NONCACHE_NORMAL, +}; + +static struct android_pmem_platform_data android_pmem_gpu_pdata = { + .name = "pmem_gpu", + .start = 0, + .size = SZ_32M, + .no_allocator = 0, + .cached = PMEM_CACHE_ENABLE, +}; + +static struct android_usb_platform_data android_usb_pdata = { + .vendor_id = 0x0bb4, + .product_id = 0x0c01, + .adb_product_id = 0x0c02, + .version = 0x0100, + .product_name = "Android Phone", + .manufacturer_name = "Freescale", + .nluns = 3, +}; + +/*! + * Board specific fixup function. It is called by \b setup_arch() in + * setup.c file very early on during kernel starts. It allows the user to + * statically fill in the proper values for the passed-in parameters. None of + * the parameters is used currently. + * + * @param desc pointer to \b struct \b machine_desc + * @param tags pointer to \b struct \b tag + * @param cmdline pointer to the command line + * @param mi pointer to \b struct \b meminfo + */ +static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags, + char **cmdline, struct meminfo *mi) +{ + struct tag *t; + int size; + + mxc_set_cpu_type(MXC_CPU_MX50); + + get_cpu_wp = mx50_rdp_get_cpu_wp; + set_num_cpu_wp = mx50_rdp_set_num_cpu_wp; + + for_each_tag(t, tags) { + if (t->hdr.tag != ATAG_MEM) + continue; + size = t->u.mem.size; + + android_pmem_pdata.start = + PHYS_OFFSET + size - android_pmem_pdata.size; + android_pmem_gpu_pdata.start = + android_pmem_pdata.start - android_pmem_gpu_pdata.size; +#if 0 + gpu_device.resource[5].start = + android_pmem_gpu_pdata.start - SZ_16M; + gpu_device.resource[5].end = + gpu_device.resource[5].start + SZ_16M - 1; +#endif + size -= android_pmem_pdata.size; + size -= android_pmem_gpu_pdata.size; + //size -= SZ_16M; + t->u.mem.size = size; + } +} + +static void __init mx50_rdp_io_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx50_rdp, \ + ARRAY_SIZE(mx50_rdp)); + + gpio_request(SD1_WP, "sdhc1-wp"); + gpio_direction_input(SD1_WP); + + gpio_request(SD1_CD, "sdhc1-cd"); + gpio_direction_input(SD1_CD); + + gpio_request(SD2_WP, "sdhc2-wp"); + gpio_direction_input(SD2_WP); + + gpio_request(SD2_CD, "sdhc2-cd"); + gpio_direction_input(SD2_CD); + + gpio_request(HP_DETECT, "hp-det"); + gpio_direction_input(HP_DETECT); + + gpio_request(PWR_INT, "pwr-int"); + gpio_direction_input(PWR_INT); + + gpio_request(EPDC_PMIC_WAKE, "epdc-pmic-wake"); + gpio_direction_output(EPDC_PMIC_WAKE, 0); + + gpio_request(EPDC_VCOM, "epdc-vcom"); + gpio_direction_output(EPDC_VCOM, 0); + + gpio_request(EPDC_PMIC_INT, "epdc-pmic-int"); + gpio_direction_input(EPDC_PMIC_INT); + + gpio_request(EPDC_PWRSTAT, "epdc-pwrstat"); + gpio_direction_input(EPDC_PWRSTAT); + + /* ELCDIF backlight */ + gpio_request(EPDC_ELCDIF_BACKLIGHT, "elcdif-backlight"); + gpio_direction_output(EPDC_ELCDIF_BACKLIGHT, 1); + + if (enable_w1) { + struct pad_desc one_wire = MX50_PAD_OWIRE__OWIRE; + mxc_iomux_v3_setup_pad(&one_wire); + } + + /* SGTL5000_OSC_EN */ + gpio_request(SGTL_OSCEN, "sgtl5000-osc-en"); + gpio_direction_output(SGTL_OSCEN, 1); + + gpio_request(FEC_EN, "fec-en"); + gpio_direction_output(FEC_EN, 0); + + gpio_request(FEC_RESET_B, "fec-reset_b"); + gpio_direction_output(FEC_RESET_B, 0); + udelay(500); + gpio_set_value(FEC_RESET_B, 1); + +} + +/*! + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + /* SD card detect irqs */ + mxcsdhc1_device.resource[2].start = IOMUX_TO_IRQ_V3(SD1_CD); + mxcsdhc1_device.resource[2].end = IOMUX_TO_IRQ_V3(SD1_CD); + mxcsdhc2_device.resource[2].start = IOMUX_TO_IRQ_V3(SD2_CD); + mxcsdhc2_device.resource[2].end = IOMUX_TO_IRQ_V3(SD2_CD); + + mxc_cpu_common_init(); + mxc_register_gpios(); + mx50_rdp_io_init(); + + mxc_register_device(&mxc_dma_device, NULL); + mxc_register_device(&mxc_wdt_device, NULL); + mxc_register_device(&mxcspi1_device, &mxcspi1_data); + mxc_register_device(&mxcspi3_device, &mxcspi3_data); + mxc_register_device(&mxci2c_devices[0], &mxci2c_data); + mxc_register_device(&mxci2c_devices[1], &mxci2c_data); + mxc_register_device(&mxci2c_devices[2], &mxci2c_data); + + mxc_register_device(&mxc_rtc_device, &srtc_data); + mxc_register_device(&mxc_w1_master_device, &mxc_w1_data); + mxc_register_device(&gpu_device, NULL); + mxc_register_device(&mxc_pxp_device, NULL); + mxc_register_device(&mxc_pxp_client_device, NULL); + mxc_register_device(&mxc_pxp_v4l2, NULL); + mxc_register_device(&busfreq_device, NULL); + mxc_register_device(&mxc_dvfs_core_device, &dvfs_core_data); + + /* + mxc_register_device(&mx53_lpmode_device, NULL); + mxc_register_device(&mxc_dvfs_per_device, &dvfs_per_data); + */ + /* + mxc_register_device(&mxc_keypad_device, &keypad_plat_data); + */ + mxc_register_device(&mxcsdhc1_device, &mmc1_data); + mxc_register_device(&mxcsdhc2_device, &mmc2_data); + mxc_register_device(&mxcsdhc3_device, &mmc3_data); + mxc_register_device(&mxc_ssi1_device, NULL); + mxc_register_device(&mxc_ssi2_device, NULL); + mxc_register_device(&mxc_fec_device, &fec_data); + spi_register_board_info(mxc_dataflash_device, + ARRAY_SIZE(mxc_dataflash_device)); + i2c_register_board_info(0, mxc_i2c0_board_info, + ARRAY_SIZE(mxc_i2c0_board_info)); + i2c_register_board_info(1, mxc_i2c1_board_info, + ARRAY_SIZE(mxc_i2c1_board_info)); + + mxc_register_device(&epdc_device, &epdc_data); + mxc_register_device(&lcd_wvga_device, &lcd_wvga_data); + mxc_register_device(&elcdif_device, &fb_data[0]); + mxc_register_device(&mxs_viim, NULL); + + mxc_register_device(&mxc_android_pmem_device, &android_pmem_pdata); + mxc_register_device(&mxc_android_pmem_gpu_device, &android_pmem_gpu_pdata); + mxc_register_device(&android_usb_device, &android_usb_pdata); + mxc_register_device(&mxc_powerkey_device, NULL); + mx50_rdp_init_mc13892(); +/* + pm_power_off = mxc_power_off; + */ + mxc_register_device(&mxc_sgtl5000_device, &sgtl5000_data); + mx5_set_otghost_vbus_func(mx50_arm2_usb_set_vbus); + mx5_usb_dr_init(); + mx5_usbh1_init(); +} + +static void __init mx50_rdp_timer_init(void) +{ + struct clk *uart_clk; + + mx50_clocks_init(32768, 24000000, 22579200); + + uart_clk = clk_get(NULL, "uart_clk.0"); + early_console_setup(MX53_BASE_ADDR(UART1_BASE_ADDR), uart_clk); +} + +static struct sys_timer mxc_timer = { + .init = mx50_rdp_timer_init, +}; + +/* + * The following uses standard kernel macros define in arch.h in order to + * initialize __mach_desc_MX50_RDP data structure. + */ +MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform") + /* Maintainer: Freescale Semiconductor, Inc. */ + .fixup = fixup_mxc_board, + .map_io = mx5_map_io, + .init_irq = mx5_init_irq, + .init_machine = mxc_board_init, + .timer = &mxc_timer, +MACHINE_END diff --git a/arch/arm/mach-mx5/mx50_rdp_pmic_mc13892.c b/arch/arm/mach-mx5/mx50_rdp_pmic_mc13892.c new file mode 100644 index 000000000000..e8411cec72b5 --- /dev/null +++ b/arch/arm/mach-mx5/mx50_rdp_pmic_mc13892.c @@ -0,0 +1,418 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/err.h> +#include <linux/pmic_external.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/mc13892/core.h> +#include <mach/irqs.h> + +#include <mach/iomux-mx50.h> + +/* + * Convenience conversion. + * Here atm, maybe there is somewhere better for this. + */ +#define mV_to_uV(mV) (mV * 1000) +#define uV_to_mV(uV) (uV / 1000) +#define V_to_uV(V) (mV_to_uV(V * 1000)) +#define uV_to_V(uV) (uV_to_mV(uV) / 1000) + +/* Coin cell charger enable */ +#define COINCHEN_LSH 23 +#define COINCHEN_WID 1 +/* Coin cell charger voltage setting */ +#define VCOIN_LSH 20 +#define VCOIN_WID 3 + +/* Coin Charger voltage */ +#define VCOIN_2_5V 0x0 +#define VCOIN_2_7V 0x1 +#define VCOIN_2_8V 0x2 +#define VCOIN_2_9V 0x3 +#define VCOIN_3_0V 0x4 +#define VCOIN_3_1V 0x5 +#define VCOIN_3_2V 0x6 +#define VCOIN_3_3V 0x7 + +/* Keeps VSRTC and CLK32KMCU on for all states */ +#define DRM_LSH 4 +#define DRM_WID 1 + +/* regulator standby mask */ +#define GEN1_STBY_MASK (1 << 1) +#define IOHI_STBY_MASK (1 << 4) +#define DIG_STBY_MASK (1 << 10) +#define GEN2_STBY_MASK (1 << 13) +#define PLL_STBY_MASK (1 << 16) +#define USB2_STBY_MASK (1 << 19) + +#define GEN3_STBY_MASK (1 << 1) +#define CAM_STBY_MASK (1 << 7) +#define VIDEO_STBY_MASK (1 << 13) +#define AUDIO_STBY_MASK (1 << 16) +#define SD_STBY_MASK (1 << 19) + +#define REG_MODE_0_ALL_MASK (DIG_STBY_MASK | GEN1_STBY_MASK) +#define REG_MODE_1_ALL_MASK (CAM_STBY_MASK | VIDEO_STBY_MASK |\ + AUDIO_STBY_MASK | SD_STBY_MASK) + +/* switch mode setting */ +#define SW1MODE_LSB 0 +#define SW2MODE_LSB 10 +#define SW3MODE_LSB 0 +#define SW4MODE_LSB 8 + +#define SWMODE_MASK 0xF +#define SWMODE_AUTO 0x8 + +/* CPU */ +static struct regulator_consumer_supply sw1_consumers[] = { + { + .supply = "cpu_vcc", + } +}; + +static struct regulator_consumer_supply vgen1_consumers[] = { + { + /* sgtl5000 */ + .supply = "VDDA", + .dev_name = "1-000a", + }, + { + /* sgtl5000 */ + .supply = "VDDIO", + .dev_name = "1-000a", + }, +}; + +struct mc13892; + +static struct regulator_init_data sw1_init = { + .constraints = { + .name = "SW1", + .min_uV = mV_to_uV(600), + .max_uV = mV_to_uV(1375), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .valid_modes_mask = 0, + .always_on = 1, + .boot_on = 1, + .initial_state = PM_SUSPEND_MEM, + .state_mem = { + .uV = 850000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(sw1_consumers), + .consumer_supplies = sw1_consumers, +}; + +static struct regulator_init_data sw2_init = { + .constraints = { + .name = "SW2", + .min_uV = mV_to_uV(900), + .max_uV = mV_to_uV(1850), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + .initial_state = PM_SUSPEND_MEM, + .state_mem = { + .uV = 950000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + } +}; + +static struct regulator_init_data sw3_init = { + .constraints = { + .name = "SW3", + .min_uV = mV_to_uV(900), + .max_uV = mV_to_uV(1850), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + .initial_state = PM_SUSPEND_MEM, + .state_mem = { + .uV = 950000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + } +}; + +static struct regulator_init_data sw4_init = { + .constraints = { + .name = "SW4", + .min_uV = mV_to_uV(1100), + .max_uV = mV_to_uV(1850), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data viohi_init = { + .constraints = { + .name = "VIOHI", + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data vusb_init = { + .constraints = { + .name = "VUSB", + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data swbst_init = { + .constraints = { + .name = "SWBST", + } +}; + +static struct regulator_init_data vdig_init = { + .constraints = { + .name = "VDIG", + .min_uV = mV_to_uV(1200), + .max_uV = mV_to_uV(1200), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .boot_on = 1, + .always_on = 1, + }, +}; + +static struct regulator_init_data vpll_init = { + .constraints = { + .name = "VPLL", + .min_uV = mV_to_uV(1050), + .max_uV = mV_to_uV(1800), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vusb2_init = { + .constraints = { + .name = "VUSB2", + .min_uV = mV_to_uV(2400), + .max_uV = mV_to_uV(2775), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vvideo_init = { + .constraints = { + .name = "VVIDEO", + .min_uV = mV_to_uV(2775), + .max_uV = mV_to_uV(2775), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .apply_uV = 1, + }, +}; + +static struct regulator_init_data vaudio_init = { + .constraints = { + .name = "VAUDIO", + .min_uV = mV_to_uV(2300), + .max_uV = mV_to_uV(3000), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + } +}; + +static struct regulator_init_data vsd_init = { + .constraints = { + .name = "VSD", + .min_uV = mV_to_uV(1800), + .max_uV = mV_to_uV(3150), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + } +}; + +static struct regulator_init_data vcam_init = { + .constraints = { + .name = "VCAM", + .min_uV = mV_to_uV(2500), + .max_uV = mV_to_uV(3000), + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE, + .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL, + .always_on = 1, + } +}; + +static struct regulator_init_data vgen1_init = { + .constraints = { + .name = "VGEN1", + .min_uV = mV_to_uV(3000), + .max_uV = mV_to_uV(3000), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(vgen1_consumers), + .consumer_supplies = vgen1_consumers, +}; + +static struct regulator_init_data vgen2_init = { + .constraints = { + .name = "VGEN2", + .min_uV = mV_to_uV(1200), + .max_uV = mV_to_uV(3150), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + } +}; + +static struct regulator_init_data vgen3_init = { + .constraints = { + .name = "VGEN3", + .min_uV = mV_to_uV(1800), + .max_uV = mV_to_uV(2900), + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + } +}; + +static struct regulator_init_data gpo1_init = { + .constraints = { + .name = "GPO1", + } +}; + +static struct regulator_init_data gpo2_init = { + .constraints = { + .name = "GPO2", + } +}; + +static struct regulator_init_data gpo3_init = { + .constraints = { + .name = "GPO3", + } +}; + +static struct regulator_init_data gpo4_init = { + .constraints = { + .name = "GPO4", + } +}; + +static int mc13892_regulator_init(struct mc13892 *mc13892) +{ + unsigned int value, register_mask; + printk("Initializing regulators for mx50 rdp.\n"); + + /* enable standby controll for all regulators */ + pmic_read_reg(REG_MODE_0, &value, 0xffffff); + value |= REG_MODE_0_ALL_MASK; + pmic_write_reg(REG_MODE_0, value, 0xffffff); + + pmic_read_reg(REG_MODE_1, &value, 0xffffff); + value |= REG_MODE_1_ALL_MASK; + pmic_write_reg(REG_MODE_1, value, 0xffffff); + + /* enable switch audo mode */ + pmic_read_reg(REG_IDENTIFICATION, &value, 0xffffff); + /* only for mc13892 2.0A */ + if ((value & 0x0000FFFF) == 0x45d0) { + pmic_read_reg(REG_SW_4, &value, 0xffffff); + register_mask = (SWMODE_MASK << SW1MODE_LSB) | + (SWMODE_MASK << SW2MODE_LSB); + value &= ~register_mask; + value |= (SWMODE_AUTO << SW1MODE_LSB) | + (SWMODE_AUTO << SW2MODE_LSB); + pmic_write_reg(REG_SW_4, value, 0xffffff); + + pmic_read_reg(REG_SW_5, &value, 0xffffff); + register_mask = (SWMODE_MASK << SW3MODE_LSB) | + (SWMODE_MASK << SW4MODE_LSB); + value &= ~register_mask; + value |= (SWMODE_AUTO << SW3MODE_LSB) | + (SWMODE_AUTO << SW4MODE_LSB); + pmic_write_reg(REG_SW_5, value, 0xffffff); + } + /* Enable coin cell charger */ + value = BITFVAL(COINCHEN, 1) | BITFVAL(VCOIN, VCOIN_3_0V); + register_mask = BITFMASK(COINCHEN) | BITFMASK(VCOIN); + pmic_write_reg(REG_POWER_CTL0, value, register_mask); + +#if defined(CONFIG_RTC_DRV_MXC_V2) || defined(CONFIG_RTC_DRV_MXC_V2_MODULE) + value = BITFVAL(DRM, 1); + register_mask = BITFMASK(DRM); + pmic_write_reg(REG_POWER_CTL0, value, register_mask); +#endif + + mc13892_register_regulator(mc13892, MC13892_SW1, &sw1_init); + mc13892_register_regulator(mc13892, MC13892_SW2, &sw2_init); + mc13892_register_regulator(mc13892, MC13892_SW3, &sw3_init); + mc13892_register_regulator(mc13892, MC13892_SW4, &sw4_init); + mc13892_register_regulator(mc13892, MC13892_SWBST, &swbst_init); + mc13892_register_regulator(mc13892, MC13892_VIOHI, &viohi_init); + mc13892_register_regulator(mc13892, MC13892_VPLL, &vpll_init); + mc13892_register_regulator(mc13892, MC13892_VDIG, &vdig_init); + mc13892_register_regulator(mc13892, MC13892_VSD, &vsd_init); + mc13892_register_regulator(mc13892, MC13892_VUSB2, &vusb2_init); + mc13892_register_regulator(mc13892, MC13892_VVIDEO, &vvideo_init); + mc13892_register_regulator(mc13892, MC13892_VAUDIO, &vaudio_init); + mc13892_register_regulator(mc13892, MC13892_VCAM, &vcam_init); + mc13892_register_regulator(mc13892, MC13892_VGEN1, &vgen1_init); + mc13892_register_regulator(mc13892, MC13892_VGEN2, &vgen2_init); + mc13892_register_regulator(mc13892, MC13892_VGEN3, &vgen3_init); + mc13892_register_regulator(mc13892, MC13892_VUSB, &vusb_init); + mc13892_register_regulator(mc13892, MC13892_GPO1, &gpo1_init); + mc13892_register_regulator(mc13892, MC13892_GPO2, &gpo2_init); + mc13892_register_regulator(mc13892, MC13892_GPO3, &gpo3_init); + mc13892_register_regulator(mc13892, MC13892_GPO4, &gpo4_init); + + regulator_has_full_constraints(); + + return 0; +} + +static struct mc13892_platform_data mc13892_plat = { + .init = mc13892_regulator_init, +}; + +static struct spi_board_info __initdata mc13892_spi_device = { + .modalias = "pmic_spi", + .irq = IOMUX_TO_IRQ_V3(114), + .max_speed_hz = 6000000, /* max spi SCK clock speed in HZ */ + .bus_num = 3, + .chip_select = 0, + .platform_data = &mc13892_plat, +}; + + +int __init mx50_rdp_init_mc13892(void) +{ + return spi_register_board_info(&mc13892_spi_device, 1); +} diff --git a/arch/arm/mach-mx5/mx50_suspend.S b/arch/arm/mach-mx5/mx50_suspend.S new file mode 100644 index 000000000000..4d9e1b49a23d --- /dev/null +++ b/arch/arm/mach-mx5/mx50_suspend.S @@ -0,0 +1,234 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/linkage.h> + +#define ARM_CTRL_DCACHE 1 << 2 +#define ARM_CTRL_ICACHE 1 << 12 +#define ARM_AUXCR_L2EN 1 << 1 + +/* + * mx50_suspend + * + * Suspend the processor (eg, wait for interrupt). + * Set the DDR into Self Refresh + * IRQs are already disabled. + */ +ENTRY(mx50_suspend) + stmfd sp!, {r4,r5,r6,r7,r8, r9,r10,r11} @ Save registers + + mov r6, r0 @save databahn address + +/* Before putting DDR into self-refresh, make sure + any LPM mode that the DDR might be in is exited. +*/ + /* If Databahn is in LPM4, exit that mode first. */ + ldr r8,[r6, #0x50] @Store LPM mode in r8 + mov r0, r8 + bic r0, r0, #0x1F + str r0,[r6, #0x50] + + + /* Disable L1 caches */ + mrc p15, 0, r0, c1, c0, 0 @ R0 = system control reg + bic r0, r0, #ARM_CTRL_ICACHE @ Disable ICache + bic r0, r0, #ARM_CTRL_DCACHE @ Disable DCache + mcr p15, 0, r0, c1, c0, 0 @ Update system control reg + + mrc p15, 1, r0, c0, c0, 1 @ Read CLIDR + ands r3, r0, #0x7000000 @ Isolate level of coherency + mov r3, r3, lsr #23 @ Cache level value (naturally aligned) + beq FinishedClean + mov r10, #0 +Loop1Clean: + add r2, r10, r10, lsr #1 @ Work out cache level + mov r1, r0, lsr r2 @ R0 bottom 3 bits = Cache Type + @ for this level + and r1, r1, #7 @ Get those 3 bits alone + cmp r1, #2 + blt SkipClean @ No cache or only instruction cache + @ at this level + mcr p15, 2, r10, c0, c0, 0 @ Write the Cache Size selection register + mov r1, #0 + .long 0xF57FF06F @ ISB + mrc p15, 1, r1, c0, c0, 0 @ Reads current Cache Size ID register + and r2, r1, #7 @ Extract the line length field + add r2, r2, #4 @ Add 4 for the line length offset + @ (log2 16 bytes) + ldr r4, =0x3FF + ands r4, r4, r1, lsr #3 @ R4 is the max number on the + @ way size (right aligned) + clz r5, r4 @ R5 is the bit position of the way + @ size increment + ldr r7, =0x00007FFF + ands r7, r7, r1, lsr #13 @ R7 is the max number of the index + @ size (right aligned) +Loop2Clean: + mov r9, r4 @ R9 working copy of the max way size + @ (right aligned) +Loop3Clean: + orr r11, r10, r9, lsl r5 @ Factor in the way number and cache + @ number into R11 + orr r11, r11, r7, lsl r2 @ Factor in the index number + mcr p15, 0, r11, c7, c14, 2 @ Clean and invalidate by set/way + subs r9, r9, #1 @ Decrement the way number + bge Loop3Clean + subs r7, r7, #1 @ Decrement the index + bge Loop2Clean +SkipClean: + add r10, r10, #2 @ Increment the cache number + cmp r3, r10 + bgt Loop1Clean + +FinishedClean: + + /* Disable L2 cache */ + mrc p15, 0, r0, c1, c0, 1 @ R0 = auxiliary control reg + bic r0, r0, #ARM_AUXCR_L2EN @ Disable L2 cache + mcr p15, 0, r0, c1, c0, 1 @ Update aux control reg + +/* Wait for the databahn to idle + Meaning, no access to the databahn is + being made. +*/ +EnterWFI: + ldr r0,[r6, #0x13c] + and r0, r0, #0x100 + ldr r2, =0x100 + cmp r0, r2 + beq EnterWFI + + /* Enter self-refresh mode */ + ldr r0,[r6, #0x4c] + orr r0,r0,#0x1 + str r0,[r6, #0x4c] + +LoopCKE0: + /* Wait for CKE = 0 */ + ldr r0,[r6, #0xfc] + and r0, r0, #0x10000 + ldr r2, =0x10000 + cmp r0, r2 + beq LoopCKE0 + + /* Stop controller */ + ldr r0,[r6] + bic r0, r0, #0x1 + str r0,[r6] + + .long 0xe320f003 @ Opcode for WFI + + /* Start controller */ + ldr r0,[r6] + orr r0,r0,#0x1 + str r0,[r6] + +LoopPHY: + /* Wait for PHY ready */ + ldr r0,[r6, #0x264] + and r0, r0, #0xfffffffe + ldr r2, =0x0 + cmp r0, r2 + beq LoopPHY + + /*Leave self-refresh mode */ + ldr r0,[r6, #0x4c] + and r0,r0,#0xfffffffe + str r0,[r6, #0x4c] + +LoopCKE1: + /*Wait for CKE = 1 */ + ldr r0,[r6, #0xfc] + and r0, r0, #0x10000 + ldr r2, =0x10000 + cmp r0, r2 + bne LoopCKE1 + + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ Invalidate inst cache + +/* Invalidate data caches */ + mrc p15, 1, r0, c0, c0, 1 @ Read CLIDR + ands r3, r0, #0x7000000 @ Isolate level of coherency + mov r3, r3, lsr #23 @ Cache level value (naturally aligned) + beq FinishedInvalidate + mov r10, #0 +Loop1Invalidate: + add r2, r10, r10, lsr #1 @ Work out cache level + mov r1, r0, lsr r2 @ R0 bottom 3 bits = Cache + @ Type for this level + and r1, r1, #7 @ Get those 3 bits alone + cmp r1, #2 + blt SkipInvalidate @ No cache or only instruction cache + @at this level + mcr p15, 2, r10, c0, c0, 0 @ Write the Cache Size selection register + mov r1, #0 + .long 0xF57FF06F @ ISB + mrc p15, 1, r1, c0, c0, 0 @ Reads current Cache Size ID register + and r2, r1, #7 @ Extract the line length field + add r2, r2, #4 @ Add 4 for the line length offset + @(log2 16 bytes) + ldr r4, =0x3FF + ands r4, r4, r1, lsr #3 @ R4 is the max number on the way + @size (right aligned) + clz r5, r4 @ R5 is the bit position of the way + @ size increment + ldr r7, =0x00007FFF + ands r7, r7, r1, lsr #13 @ R7 is the max number of the + @ index size (right aligned) +Loop2Invalidate: + mov r9, r4 @ R9 working copy of the max way + @ size (right aligned) +Loop3Invalidate: + orr r11, r10, r9, lsl r5 @ Factor in the way number and cache + @ number into R11 + orr r11, r11, r7, lsl r2 @ Factor in the index number + mcr p15, 0, r11, c7, c6, 2 @ Invalidate by set/way + subs r9, r9, #1 @ Decrement the way number + bge Loop3Invalidate + subs r7, r7, #1 @ Decrement the index + bge Loop2Invalidate +SkipInvalidate: + add r10, r10, #2 @ Increment the cache number + cmp r3, r10 + bgt Loop1Invalidate + +FinishedInvalidate: + + /* Enable L2 cache */ + mrc p15, 0, r0, c1, c0, 1 @ R0 = auxiliary control reg + orr r0, r0, #ARM_AUXCR_L2EN @ Enable L2 cache + mcr p15, 0, r0, c1, c0, 1 @ Update aux control reg + + /* Enable L1 caches */ + mrc p15, 0, r0, c1, c0, 0 @ R0 = system control reg + orr r0, r0, #ARM_CTRL_ICACHE @ Enable ICache + orr r0, r0, #ARM_CTRL_DCACHE @ Enable DCache + mcr p15, 0, r0, c1, c0, 0 @ Update system control reg + + /* restore LPM mode. */ + str r8, [r6, #0x50] + + /* Restore registers */ + ldmfd sp!, {r4,r5,r6,r7,r8,r9,r10,r11} + mov pc, lr + + .type mx50_do_suspend, #object +ENTRY(mx50_do_suspend) + .word mx50_suspend + .size mx50_suspend, . - mx50_suspend diff --git a/arch/arm/mach-mx5/mx50_wfi.S b/arch/arm/mach-mx5/mx50_wfi.S new file mode 100644 index 000000000000..b0d984c4527d --- /dev/null +++ b/arch/arm/mach-mx5/mx50_wfi.S @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/linkage.h> + +/* + * mx50_wait + * + * Idle the processor (eg, wait for interrupt). + * Make sure DDR is in self-refresh. + * IRQs are already disabled. + */ +ENTRY(mx50_wait) + stmfd sp!, {r3,r4,r5,r6,r7,r8,r9,r10,r11} @ Save registers + + mov r6, r0 @save CCM address + mov r5, r1 @save DataBahn address + + /* + * Make sure the DDR is self-refresh, before setting the clock bits. + */ + + /* Step 2: Poll the CKE_STATUS bit. */ +LoopCKE0: + /* Wait for CKE = 0 */ + ldr r0,[r5, #0xfc] + and r0, r0, #0x10000 + ldr r2, =0x10000 + cmp r0, r2 + beq LoopCKE0 + + /* Set the DDR_CLKGATE to 0x1. */ + ldr r0, [r6, #0x98] + bic r0, r0, #0x80000000 + str r0, [r6, #0x98] + + .long 0xe320f003 @ Opcode for WFI + + /* Set the DDR_CLKGATE to 0x3. */ + ldr r0, [r6, #0x98] + orr r0, r0, #0xC0000000 + str r0, [r6, #0x98] + + /* Restore registers */ + ldmfd sp!, {r3,r4,r5,r6,r7,r8,r9,r10,r11} + mov pc, lr + + .type mx50_do_wait, #object +ENTRY(mx50_do_wait) + .word mx50_wait + .size mx50_wait, . - mx50_wait diff --git a/arch/arm/mach-mx5/regs-apbh.h b/arch/arm/mach-mx5/regs-apbh.h new file mode 100644 index 000000000000..23b9f4baa404 --- /dev/null +++ b/arch/arm/mach-mx5/regs-apbh.h @@ -0,0 +1,512 @@ +/* + * Freescale APBH Register Definitions + * + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This file is created by xml file. Don't Edit it. + * + * Xml Revision: 1.3 + * Template revision: 1.3 + */ + +#ifndef __ARCH_ARM___APBH_H +#define __ARCH_ARM___APBH_H + + +#define HW_APBH_CTRL0 (0x00000000) +#define HW_APBH_CTRL0_SET (0x00000004) +#define HW_APBH_CTRL0_CLR (0x00000008) +#define HW_APBH_CTRL0_TOG (0x0000000c) + +#define BM_APBH_CTRL0_SFTRST 0x80000000 +#define BM_APBH_CTRL0_CLKGATE 0x40000000 +#define BM_APBH_CTRL0_AHB_BURST8_EN 0x20000000 +#define BM_APBH_CTRL0_APB_BURST_EN 0x10000000 +#define BP_APBH_CTRL0_RSVD0 16 +#define BM_APBH_CTRL0_RSVD0 0x0FFF0000 +#define BF_APBH_CTRL0_RSVD0(v) \ + (((v) << 16) & BM_APBH_CTRL0_RSVD0) +#define BP_APBH_CTRL0_CLKGATE_CHANNEL 0 +#define BM_APBH_CTRL0_CLKGATE_CHANNEL 0x0000FFFF +#define BF_APBH_CTRL0_CLKGATE_CHANNEL(v) \ + (((v) << 0) & BM_APBH_CTRL0_CLKGATE_CHANNEL) +#define BV_APBH_CTRL0_CLKGATE_CHANNEL__NAND0 0x0001 +#define BV_APBH_CTRL0_CLKGATE_CHANNEL__NAND1 0x0002 +#define BV_APBH_CTRL0_CLKGATE_CHANNEL__NAND2 0x0004 +#define BV_APBH_CTRL0_CLKGATE_CHANNEL__NAND3 0x0008 +#define BV_APBH_CTRL0_CLKGATE_CHANNEL__NAND4 0x0010 +#define BV_APBH_CTRL0_CLKGATE_CHANNEL__NAND5 0x0020 +#define BV_APBH_CTRL0_CLKGATE_CHANNEL__NAND6 0x0040 +#define BV_APBH_CTRL0_CLKGATE_CHANNEL__NAND7 0x0080 +#define BV_APBH_CTRL0_CLKGATE_CHANNEL__SSP 0x0100 + +#define HW_APBH_CTRL1 (0x00000010) +#define HW_APBH_CTRL1_SET (0x00000014) +#define HW_APBH_CTRL1_CLR (0x00000018) +#define HW_APBH_CTRL1_TOG (0x0000001c) + +#define BM_APBH_CTRL1_CH15_CMDCMPLT_IRQ_EN 0x80000000 +#define BM_APBH_CTRL1_CH14_CMDCMPLT_IRQ_EN 0x40000000 +#define BM_APBH_CTRL1_CH13_CMDCMPLT_IRQ_EN 0x20000000 +#define BM_APBH_CTRL1_CH12_CMDCMPLT_IRQ_EN 0x10000000 +#define BM_APBH_CTRL1_CH11_CMDCMPLT_IRQ_EN 0x08000000 +#define BM_APBH_CTRL1_CH10_CMDCMPLT_IRQ_EN 0x04000000 +#define BM_APBH_CTRL1_CH9_CMDCMPLT_IRQ_EN 0x02000000 +#define BM_APBH_CTRL1_CH8_CMDCMPLT_IRQ_EN 0x01000000 +#define BM_APBH_CTRL1_CH7_CMDCMPLT_IRQ_EN 0x00800000 +#define BM_APBH_CTRL1_CH6_CMDCMPLT_IRQ_EN 0x00400000 +#define BM_APBH_CTRL1_CH5_CMDCMPLT_IRQ_EN 0x00200000 +#define BM_APBH_CTRL1_CH4_CMDCMPLT_IRQ_EN 0x00100000 +#define BM_APBH_CTRL1_CH3_CMDCMPLT_IRQ_EN 0x00080000 +#define BM_APBH_CTRL1_CH2_CMDCMPLT_IRQ_EN 0x00040000 +#define BM_APBH_CTRL1_CH1_CMDCMPLT_IRQ_EN 0x00020000 +#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ_EN 0x00010000 +#define BM_APBH_CTRL1_CH15_CMDCMPLT_IRQ 0x00008000 +#define BM_APBH_CTRL1_CH14_CMDCMPLT_IRQ 0x00004000 +#define BM_APBH_CTRL1_CH13_CMDCMPLT_IRQ 0x00002000 +#define BM_APBH_CTRL1_CH12_CMDCMPLT_IRQ 0x00001000 +#define BM_APBH_CTRL1_CH11_CMDCMPLT_IRQ 0x00000800 +#define BM_APBH_CTRL1_CH10_CMDCMPLT_IRQ 0x00000400 +#define BM_APBH_CTRL1_CH9_CMDCMPLT_IRQ 0x00000200 +#define BM_APBH_CTRL1_CH8_CMDCMPLT_IRQ 0x00000100 +#define BM_APBH_CTRL1_CH7_CMDCMPLT_IRQ 0x00000080 +#define BM_APBH_CTRL1_CH6_CMDCMPLT_IRQ 0x00000040 +#define BM_APBH_CTRL1_CH5_CMDCMPLT_IRQ 0x00000020 +#define BM_APBH_CTRL1_CH4_CMDCMPLT_IRQ 0x00000010 +#define BM_APBH_CTRL1_CH3_CMDCMPLT_IRQ 0x00000008 +#define BM_APBH_CTRL1_CH2_CMDCMPLT_IRQ 0x00000004 +#define BM_APBH_CTRL1_CH1_CMDCMPLT_IRQ 0x00000002 +#define BM_APBH_CTRL1_CH0_CMDCMPLT_IRQ 0x00000001 + +#define HW_APBH_CTRL2 (0x00000020) +#define HW_APBH_CTRL2_SET (0x00000024) +#define HW_APBH_CTRL2_CLR (0x00000028) +#define HW_APBH_CTRL2_TOG (0x0000002c) + +#define BM_APBH_CTRL2_CH15_ERROR_STATUS 0x80000000 +#define BV_APBH_CTRL2_CH15_ERROR_STATUS__TERMINATION 0x0 +#define BV_APBH_CTRL2_CH15_ERROR_STATUS__BUS_ERROR 0x1 +#define BM_APBH_CTRL2_CH14_ERROR_STATUS 0x40000000 +#define BV_APBH_CTRL2_CH14_ERROR_STATUS__TERMINATION 0x0 +#define BV_APBH_CTRL2_CH14_ERROR_STATUS__BUS_ERROR 0x1 +#define BM_APBH_CTRL2_CH13_ERROR_STATUS 0x20000000 +#define BV_APBH_CTRL2_CH13_ERROR_STATUS__TERMINATION 0x0 +#define BV_APBH_CTRL2_CH13_ERROR_STATUS__BUS_ERROR 0x1 +#define BM_APBH_CTRL2_CH12_ERROR_STATUS 0x10000000 +#define BV_APBH_CTRL2_CH12_ERROR_STATUS__TERMINATION 0x0 +#define BV_APBH_CTRL2_CH12_ERROR_STATUS__BUS_ERROR 0x1 +#define BM_APBH_CTRL2_CH11_ERROR_STATUS 0x08000000 +#define BV_APBH_CTRL2_CH11_ERROR_STATUS__TERMINATION 0x0 +#define BV_APBH_CTRL2_CH11_ERROR_STATUS__BUS_ERROR 0x1 +#define BM_APBH_CTRL2_CH10_ERROR_STATUS 0x04000000 +#define BV_APBH_CTRL2_CH10_ERROR_STATUS__TERMINATION 0x0 +#define BV_APBH_CTRL2_CH10_ERROR_STATUS__BUS_ERROR 0x1 +#define BM_APBH_CTRL2_CH9_ERROR_STATUS 0x02000000 +#define BV_APBH_CTRL2_CH9_ERROR_STATUS__TERMINATION 0x0 +#define BV_APBH_CTRL2_CH9_ERROR_STATUS__BUS_ERROR 0x1 +#define BM_APBH_CTRL2_CH8_ERROR_STATUS 0x01000000 +#define BV_APBH_CTRL2_CH8_ERROR_STATUS__TERMINATION 0x0 +#define BV_APBH_CTRL2_CH8_ERROR_STATUS__BUS_ERROR 0x1 +#define BM_APBH_CTRL2_CH7_ERROR_STATUS 0x00800000 +#define BV_APBH_CTRL2_CH7_ERROR_STATUS__TERMINATION 0x0 +#define BV_APBH_CTRL2_CH7_ERROR_STATUS__BUS_ERROR 0x1 +#define BM_APBH_CTRL2_CH6_ERROR_STATUS 0x00400000 +#define BV_APBH_CTRL2_CH6_ERROR_STATUS__TERMINATION 0x0 +#define BV_APBH_CTRL2_CH6_ERROR_STATUS__BUS_ERROR 0x1 +#define BM_APBH_CTRL2_CH5_ERROR_STATUS 0x00200000 +#define BV_APBH_CTRL2_CH5_ERROR_STATUS__TERMINATION 0x0 +#define BV_APBH_CTRL2_CH5_ERROR_STATUS__BUS_ERROR 0x1 +#define BM_APBH_CTRL2_CH4_ERROR_STATUS 0x00100000 +#define BV_APBH_CTRL2_CH4_ERROR_STATUS__TERMINATION 0x0 +#define BV_APBH_CTRL2_CH4_ERROR_STATUS__BUS_ERROR 0x1 +#define BM_APBH_CTRL2_CH3_ERROR_STATUS 0x00080000 +#define BV_APBH_CTRL2_CH3_ERROR_STATUS__TERMINATION 0x0 +#define BV_APBH_CTRL2_CH3_ERROR_STATUS__BUS_ERROR 0x1 +#define BM_APBH_CTRL2_CH2_ERROR_STATUS 0x00040000 +#define BV_APBH_CTRL2_CH2_ERROR_STATUS__TERMINATION 0x0 +#define BV_APBH_CTRL2_CH2_ERROR_STATUS__BUS_ERROR 0x1 +#define BM_APBH_CTRL2_CH1_ERROR_STATUS 0x00020000 +#define BV_APBH_CTRL2_CH1_ERROR_STATUS__TERMINATION 0x0 +#define BV_APBH_CTRL2_CH1_ERROR_STATUS__BUS_ERROR 0x1 +#define BM_APBH_CTRL2_CH0_ERROR_STATUS 0x00010000 +#define BV_APBH_CTRL2_CH0_ERROR_STATUS__TERMINATION 0x0 +#define BV_APBH_CTRL2_CH0_ERROR_STATUS__BUS_ERROR 0x1 +#define BM_APBH_CTRL2_CH15_ERROR_IRQ 0x00008000 +#define BM_APBH_CTRL2_CH14_ERROR_IRQ 0x00004000 +#define BM_APBH_CTRL2_CH13_ERROR_IRQ 0x00002000 +#define BM_APBH_CTRL2_CH12_ERROR_IRQ 0x00001000 +#define BM_APBH_CTRL2_CH11_ERROR_IRQ 0x00000800 +#define BM_APBH_CTRL2_CH10_ERROR_IRQ 0x00000400 +#define BM_APBH_CTRL2_CH9_ERROR_IRQ 0x00000200 +#define BM_APBH_CTRL2_CH8_ERROR_IRQ 0x00000100 +#define BM_APBH_CTRL2_CH7_ERROR_IRQ 0x00000080 +#define BM_APBH_CTRL2_CH6_ERROR_IRQ 0x00000040 +#define BM_APBH_CTRL2_CH5_ERROR_IRQ 0x00000020 +#define BM_APBH_CTRL2_CH4_ERROR_IRQ 0x00000010 +#define BM_APBH_CTRL2_CH3_ERROR_IRQ 0x00000008 +#define BM_APBH_CTRL2_CH2_ERROR_IRQ 0x00000004 +#define BM_APBH_CTRL2_CH1_ERROR_IRQ 0x00000002 +#define BM_APBH_CTRL2_CH0_ERROR_IRQ 0x00000001 + +#define HW_APBH_CHANNEL_CTRL (0x00000030) +#define HW_APBH_CHANNEL_CTRL_SET (0x00000034) +#define HW_APBH_CHANNEL_CTRL_CLR (0x00000038) +#define HW_APBH_CHANNEL_CTRL_TOG (0x0000003c) + +#define BP_APBH_CHANNEL_CTRL_RESET_CHANNEL 16 +#define BM_APBH_CHANNEL_CTRL_RESET_CHANNEL 0xFFFF0000 +#define BF_APBH_CHANNEL_CTRL_RESET_CHANNEL(v) \ + (((v) << 16) & BM_APBH_CHANNEL_CTRL_RESET_CHANNEL) +#define BV_APBH_CHANNEL_CTRL_RESET_CHANNEL__NAND0 0x0001 +#define BV_APBH_CHANNEL_CTRL_RESET_CHANNEL__NAND1 0x0002 +#define BV_APBH_CHANNEL_CTRL_RESET_CHANNEL__NAND2 0x0004 +#define BV_APBH_CHANNEL_CTRL_RESET_CHANNEL__NAND3 0x0008 +#define BV_APBH_CHANNEL_CTRL_RESET_CHANNEL__NAND4 0x0010 +#define BV_APBH_CHANNEL_CTRL_RESET_CHANNEL__NAND5 0x0020 +#define BV_APBH_CHANNEL_CTRL_RESET_CHANNEL__NAND6 0x0040 +#define BV_APBH_CHANNEL_CTRL_RESET_CHANNEL__NAND7 0x0080 +#define BV_APBH_CHANNEL_CTRL_RESET_CHANNEL__SSP 0x0100 +#define BP_APBH_CHANNEL_CTRL_FREEZE_CHANNEL 0 +#define BM_APBH_CHANNEL_CTRL_FREEZE_CHANNEL 0x0000FFFF +#define BF_APBH_CHANNEL_CTRL_FREEZE_CHANNEL(v) \ + (((v) << 0) & BM_APBH_CHANNEL_CTRL_FREEZE_CHANNEL) +#define BV_APBH_CHANNEL_CTRL_FREEZE_CHANNEL__NAND0 0x0001 +#define BV_APBH_CHANNEL_CTRL_FREEZE_CHANNEL__NAND1 0x0002 +#define BV_APBH_CHANNEL_CTRL_FREEZE_CHANNEL__NAND2 0x0004 +#define BV_APBH_CHANNEL_CTRL_FREEZE_CHANNEL__NAND3 0x0008 +#define BV_APBH_CHANNEL_CTRL_FREEZE_CHANNEL__NAND4 0x0010 +#define BV_APBH_CHANNEL_CTRL_FREEZE_CHANNEL__NAND5 0x0020 +#define BV_APBH_CHANNEL_CTRL_FREEZE_CHANNEL__NAND6 0x0040 +#define BV_APBH_CHANNEL_CTRL_FREEZE_CHANNEL__NAND7 0x0080 +#define BV_APBH_CHANNEL_CTRL_FREEZE_CHANNEL__SSP 0x0100 + +#define HW_APBH_DEVSEL (0x00000040) + +#define BP_APBH_DEVSEL_CH15 30 +#define BM_APBH_DEVSEL_CH15 0xC0000000 +#define BF_APBH_DEVSEL_CH15(v) \ + (((v) << 30) & BM_APBH_DEVSEL_CH15) +#define BP_APBH_DEVSEL_CH14 28 +#define BM_APBH_DEVSEL_CH14 0x30000000 +#define BF_APBH_DEVSEL_CH14(v) \ + (((v) << 28) & BM_APBH_DEVSEL_CH14) +#define BP_APBH_DEVSEL_CH13 26 +#define BM_APBH_DEVSEL_CH13 0x0C000000 +#define BF_APBH_DEVSEL_CH13(v) \ + (((v) << 26) & BM_APBH_DEVSEL_CH13) +#define BP_APBH_DEVSEL_CH12 24 +#define BM_APBH_DEVSEL_CH12 0x03000000 +#define BF_APBH_DEVSEL_CH12(v) \ + (((v) << 24) & BM_APBH_DEVSEL_CH12) +#define BP_APBH_DEVSEL_CH11 22 +#define BM_APBH_DEVSEL_CH11 0x00C00000 +#define BF_APBH_DEVSEL_CH11(v) \ + (((v) << 22) & BM_APBH_DEVSEL_CH11) +#define BP_APBH_DEVSEL_CH10 20 +#define BM_APBH_DEVSEL_CH10 0x00300000 +#define BF_APBH_DEVSEL_CH10(v) \ + (((v) << 20) & BM_APBH_DEVSEL_CH10) +#define BP_APBH_DEVSEL_CH9 18 +#define BM_APBH_DEVSEL_CH9 0x000C0000 +#define BF_APBH_DEVSEL_CH9(v) \ + (((v) << 18) & BM_APBH_DEVSEL_CH9) +#define BP_APBH_DEVSEL_CH8 16 +#define BM_APBH_DEVSEL_CH8 0x00030000 +#define BF_APBH_DEVSEL_CH8(v) \ + (((v) << 16) & BM_APBH_DEVSEL_CH8) +#define BP_APBH_DEVSEL_CH7 14 +#define BM_APBH_DEVSEL_CH7 0x0000C000 +#define BF_APBH_DEVSEL_CH7(v) \ + (((v) << 14) & BM_APBH_DEVSEL_CH7) +#define BP_APBH_DEVSEL_CH6 12 +#define BM_APBH_DEVSEL_CH6 0x00003000 +#define BF_APBH_DEVSEL_CH6(v) \ + (((v) << 12) & BM_APBH_DEVSEL_CH6) +#define BP_APBH_DEVSEL_CH5 10 +#define BM_APBH_DEVSEL_CH5 0x00000C00 +#define BF_APBH_DEVSEL_CH5(v) \ + (((v) << 10) & BM_APBH_DEVSEL_CH5) +#define BP_APBH_DEVSEL_CH4 8 +#define BM_APBH_DEVSEL_CH4 0x00000300 +#define BF_APBH_DEVSEL_CH4(v) \ + (((v) << 8) & BM_APBH_DEVSEL_CH4) +#define BP_APBH_DEVSEL_CH3 6 +#define BM_APBH_DEVSEL_CH3 0x000000C0 +#define BF_APBH_DEVSEL_CH3(v) \ + (((v) << 6) & BM_APBH_DEVSEL_CH3) +#define BP_APBH_DEVSEL_CH2 4 +#define BM_APBH_DEVSEL_CH2 0x00000030 +#define BF_APBH_DEVSEL_CH2(v) \ + (((v) << 4) & BM_APBH_DEVSEL_CH2) +#define BP_APBH_DEVSEL_CH1 2 +#define BM_APBH_DEVSEL_CH1 0x0000000C +#define BF_APBH_DEVSEL_CH1(v) \ + (((v) << 2) & BM_APBH_DEVSEL_CH1) +#define BP_APBH_DEVSEL_CH0 0 +#define BM_APBH_DEVSEL_CH0 0x00000003 +#define BF_APBH_DEVSEL_CH0(v) \ + (((v) << 0) & BM_APBH_DEVSEL_CH0) + +#define HW_APBH_DMA_BURST_SIZE (0x00000050) + +#define BP_APBH_DMA_BURST_SIZE_CH15 30 +#define BM_APBH_DMA_BURST_SIZE_CH15 0xC0000000 +#define BF_APBH_DMA_BURST_SIZE_CH15(v) \ + (((v) << 30) & BM_APBH_DMA_BURST_SIZE_CH15) +#define BP_APBH_DMA_BURST_SIZE_CH14 28 +#define BM_APBH_DMA_BURST_SIZE_CH14 0x30000000 +#define BF_APBH_DMA_BURST_SIZE_CH14(v) \ + (((v) << 28) & BM_APBH_DMA_BURST_SIZE_CH14) +#define BP_APBH_DMA_BURST_SIZE_CH13 26 +#define BM_APBH_DMA_BURST_SIZE_CH13 0x0C000000 +#define BF_APBH_DMA_BURST_SIZE_CH13(v) \ + (((v) << 26) & BM_APBH_DMA_BURST_SIZE_CH13) +#define BP_APBH_DMA_BURST_SIZE_CH12 24 +#define BM_APBH_DMA_BURST_SIZE_CH12 0x03000000 +#define BF_APBH_DMA_BURST_SIZE_CH12(v) \ + (((v) << 24) & BM_APBH_DMA_BURST_SIZE_CH12) +#define BP_APBH_DMA_BURST_SIZE_CH11 22 +#define BM_APBH_DMA_BURST_SIZE_CH11 0x00C00000 +#define BF_APBH_DMA_BURST_SIZE_CH11(v) \ + (((v) << 22) & BM_APBH_DMA_BURST_SIZE_CH11) +#define BP_APBH_DMA_BURST_SIZE_CH10 20 +#define BM_APBH_DMA_BURST_SIZE_CH10 0x00300000 +#define BF_APBH_DMA_BURST_SIZE_CH10(v) \ + (((v) << 20) & BM_APBH_DMA_BURST_SIZE_CH10) +#define BP_APBH_DMA_BURST_SIZE_CH9 18 +#define BM_APBH_DMA_BURST_SIZE_CH9 0x000C0000 +#define BF_APBH_DMA_BURST_SIZE_CH9(v) \ + (((v) << 18) & BM_APBH_DMA_BURST_SIZE_CH9) +#define BP_APBH_DMA_BURST_SIZE_CH8 16 +#define BM_APBH_DMA_BURST_SIZE_CH8 0x00030000 +#define BF_APBH_DMA_BURST_SIZE_CH8(v) \ + (((v) << 16) & BM_APBH_DMA_BURST_SIZE_CH8) +#define BV_APBH_DMA_BURST_SIZE_CH8__BURST0 0x0 +#define BV_APBH_DMA_BURST_SIZE_CH8__BURST4 0x1 +#define BV_APBH_DMA_BURST_SIZE_CH8__BURST8 0x2 +#define BP_APBH_DMA_BURST_SIZE_CH7 14 +#define BM_APBH_DMA_BURST_SIZE_CH7 0x0000C000 +#define BF_APBH_DMA_BURST_SIZE_CH7(v) \ + (((v) << 14) & BM_APBH_DMA_BURST_SIZE_CH7) +#define BP_APBH_DMA_BURST_SIZE_CH6 12 +#define BM_APBH_DMA_BURST_SIZE_CH6 0x00003000 +#define BF_APBH_DMA_BURST_SIZE_CH6(v) \ + (((v) << 12) & BM_APBH_DMA_BURST_SIZE_CH6) +#define BP_APBH_DMA_BURST_SIZE_CH5 10 +#define BM_APBH_DMA_BURST_SIZE_CH5 0x00000C00 +#define BF_APBH_DMA_BURST_SIZE_CH5(v) \ + (((v) << 10) & BM_APBH_DMA_BURST_SIZE_CH5) +#define BP_APBH_DMA_BURST_SIZE_CH4 8 +#define BM_APBH_DMA_BURST_SIZE_CH4 0x00000300 +#define BF_APBH_DMA_BURST_SIZE_CH4(v) \ + (((v) << 8) & BM_APBH_DMA_BURST_SIZE_CH4) +#define BP_APBH_DMA_BURST_SIZE_CH3 6 +#define BM_APBH_DMA_BURST_SIZE_CH3 0x000000C0 +#define BF_APBH_DMA_BURST_SIZE_CH3(v) \ + (((v) << 6) & BM_APBH_DMA_BURST_SIZE_CH3) +#define BP_APBH_DMA_BURST_SIZE_CH2 4 +#define BM_APBH_DMA_BURST_SIZE_CH2 0x00000030 +#define BF_APBH_DMA_BURST_SIZE_CH2(v) \ + (((v) << 4) & BM_APBH_DMA_BURST_SIZE_CH2) +#define BP_APBH_DMA_BURST_SIZE_CH1 2 +#define BM_APBH_DMA_BURST_SIZE_CH1 0x0000000C +#define BF_APBH_DMA_BURST_SIZE_CH1(v) \ + (((v) << 2) & BM_APBH_DMA_BURST_SIZE_CH1) +#define BP_APBH_DMA_BURST_SIZE_CH0 0 +#define BM_APBH_DMA_BURST_SIZE_CH0 0x00000003 +#define BF_APBH_DMA_BURST_SIZE_CH0(v) \ + (((v) << 0) & BM_APBH_DMA_BURST_SIZE_CH0) + +#define HW_APBH_DEBUG (0x00000060) + +#define BP_APBH_DEBUG_RSVD 1 +#define BM_APBH_DEBUG_RSVD 0xFFFFFFFE +#define BF_APBH_DEBUG_RSVD(v) \ + (((v) << 1) & BM_APBH_DEBUG_RSVD) +#define BM_APBH_DEBUG_GPMI_ONE_FIFO 0x00000001 + +/* + * multi-register-define name HW_APBH_CHn_CURCMDAR + * base 0x00000100 + * count 16 + * offset 0x70 + */ +#define HW_APBH_CHn_CURCMDAR(n) (0x00000100 + (n) * 0x70) +#define BP_APBH_CHn_CURCMDAR_CMD_ADDR 0 +#define BM_APBH_CHn_CURCMDAR_CMD_ADDR 0xFFFFFFFF +#define BF_APBH_CHn_CURCMDAR_CMD_ADDR(v) (v) + +/* + * multi-register-define name HW_APBH_CHn_NXTCMDAR + * base 0x00000110 + * count 16 + * offset 0x70 + */ +#define HW_APBH_CHn_NXTCMDAR(n) (0x00000110 + (n) * 0x70) +#define BP_APBH_CHn_NXTCMDAR_CMD_ADDR 0 +#define BM_APBH_CHn_NXTCMDAR_CMD_ADDR 0xFFFFFFFF +#define BF_APBH_CHn_NXTCMDAR_CMD_ADDR(v) (v) + +/* + * multi-register-define name HW_APBH_CHn_CMD + * base 0x00000120 + * count 16 + * offset 0x70 + */ +#define HW_APBH_CHn_CMD(n) (0x00000120 + (n) * 0x70) +#define BP_APBH_CHn_CMD_XFER_COUNT 16 +#define BM_APBH_CHn_CMD_XFER_COUNT 0xFFFF0000 +#define BF_APBH_CHn_CMD_XFER_COUNT(v) \ + (((v) << 16) & BM_APBH_CHn_CMD_XFER_COUNT) +#define BP_APBH_CHn_CMD_CMDWORDS 12 +#define BM_APBH_CHn_CMD_CMDWORDS 0x0000F000 +#define BF_APBH_CHn_CMD_CMDWORDS(v) \ + (((v) << 12) & BM_APBH_CHn_CMD_CMDWORDS) +#define BP_APBH_CHn_CMD_RSVD1 9 +#define BM_APBH_CHn_CMD_RSVD1 0x00000E00 +#define BF_APBH_CHn_CMD_RSVD1(v) \ + (((v) << 9) & BM_APBH_CHn_CMD_RSVD1) +#define BM_APBH_CHn_CMD_HALTONTERMINATE 0x00000100 +#define BM_APBH_CHn_CMD_WAIT4ENDCMD 0x00000080 +#define BM_APBH_CHn_CMD_SEMAPHORE 0x00000040 +#define BM_APBH_CHn_CMD_NANDWAIT4READY 0x00000020 +#define BM_APBH_CHn_CMD_NANDLOCK 0x00000010 +#define BM_APBH_CHn_CMD_IRQONCMPLT 0x00000008 +#define BM_APBH_CHn_CMD_CHAIN 0x00000004 +#define BP_APBH_CHn_CMD_COMMAND 0 +#define BM_APBH_CHn_CMD_COMMAND 0x00000003 +#define BF_APBH_CHn_CMD_COMMAND(v) \ + (((v) << 0) & BM_APBH_CHn_CMD_COMMAND) +#define BV_APBH_CHn_CMD_COMMAND__NO_DMA_XFER 0x0 +#define BV_APBH_CHn_CMD_COMMAND__DMA_WRITE 0x1 +#define BV_APBH_CHn_CMD_COMMAND__DMA_READ 0x2 +#define BV_APBH_CHn_CMD_COMMAND__DMA_SENSE 0x3 + +/* + * multi-register-define name HW_APBH_CHn_BAR + * base 0x00000130 + * count 16 + * offset 0x70 + */ +#define HW_APBH_CHn_BAR(n) (0x00000130 + (n) * 0x70) +#define BP_APBH_CHn_BAR_ADDRESS 0 +#define BM_APBH_CHn_BAR_ADDRESS 0xFFFFFFFF +#define BF_APBH_CHn_BAR_ADDRESS(v) (v) + +/* + * multi-register-define name HW_APBH_CHn_SEMA + * base 0x00000140 + * count 16 + * offset 0x70 + */ +#define HW_APBH_CHn_SEMA(n) (0x00000140 + (n) * 0x70) +#define BP_APBH_CHn_SEMA_RSVD2 24 +#define BM_APBH_CHn_SEMA_RSVD2 0xFF000000 +#define BF_APBH_CHn_SEMA_RSVD2(v) \ + (((v) << 24) & BM_APBH_CHn_SEMA_RSVD2) +#define BP_APBH_CHn_SEMA_PHORE 16 +#define BM_APBH_CHn_SEMA_PHORE 0x00FF0000 +#define BF_APBH_CHn_SEMA_PHORE(v) \ + (((v) << 16) & BM_APBH_CHn_SEMA_PHORE) +#define BP_APBH_CHn_SEMA_RSVD1 8 +#define BM_APBH_CHn_SEMA_RSVD1 0x0000FF00 +#define BF_APBH_CHn_SEMA_RSVD1(v) \ + (((v) << 8) & BM_APBH_CHn_SEMA_RSVD1) +#define BP_APBH_CHn_SEMA_INCREMENT_SEMA 0 +#define BM_APBH_CHn_SEMA_INCREMENT_SEMA 0x000000FF +#define BF_APBH_CHn_SEMA_INCREMENT_SEMA(v) \ + (((v) << 0) & BM_APBH_CHn_SEMA_INCREMENT_SEMA) + +/* + * multi-register-define name HW_APBH_CHn_DEBUG1 + * base 0x00000150 + * count 16 + * offset 0x70 + */ +#define HW_APBH_CHn_DEBUG1(n) (0x00000150 + (n) * 0x70) +#define BM_APBH_CHn_DEBUG1_REQ 0x80000000 +#define BM_APBH_CHn_DEBUG1_BURST 0x40000000 +#define BM_APBH_CHn_DEBUG1_KICK 0x20000000 +#define BM_APBH_CHn_DEBUG1_END 0x10000000 +#define BM_APBH_CHn_DEBUG1_SENSE 0x08000000 +#define BM_APBH_CHn_DEBUG1_READY 0x04000000 +#define BM_APBH_CHn_DEBUG1_LOCK 0x02000000 +#define BM_APBH_CHn_DEBUG1_NEXTCMDADDRVALID 0x01000000 +#define BM_APBH_CHn_DEBUG1_RD_FIFO_EMPTY 0x00800000 +#define BM_APBH_CHn_DEBUG1_RD_FIFO_FULL 0x00400000 +#define BM_APBH_CHn_DEBUG1_WR_FIFO_EMPTY 0x00200000 +#define BM_APBH_CHn_DEBUG1_WR_FIFO_FULL 0x00100000 +#define BP_APBH_CHn_DEBUG1_RSVD1 5 +#define BM_APBH_CHn_DEBUG1_RSVD1 0x000FFFE0 +#define BF_APBH_CHn_DEBUG1_RSVD1(v) \ + (((v) << 5) & BM_APBH_CHn_DEBUG1_RSVD1) +#define BP_APBH_CHn_DEBUG1_STATEMACHINE 0 +#define BM_APBH_CHn_DEBUG1_STATEMACHINE 0x0000001F +#define BF_APBH_CHn_DEBUG1_STATEMACHINE(v) \ + (((v) << 0) & BM_APBH_CHn_DEBUG1_STATEMACHINE) +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__IDLE 0x00 +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__REQ_CMD1 0x01 +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__REQ_CMD3 0x02 +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__REQ_CMD2 0x03 +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__XFER_DECODE 0x04 +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__REQ_WAIT 0x05 +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__REQ_CMD4 0x06 +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__PIO_REQ 0x07 +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__READ_FLUSH 0x08 +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__READ_WAIT 0x09 +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__WRITE 0x0C +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__READ_REQ 0x0D +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__CHECK_CHAIN 0x0E +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__XFER_COMPLETE 0x0F +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__TERMINATE 0x14 +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__WAIT_END 0x15 +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__WRITE_WAIT 0x1C +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__HALT_AFTER_TERM 0x1D +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__CHECK_WAIT 0x1E +#define BV_APBH_CHn_DEBUG1_STATEMACHINE__WAIT_READY 0x1F + +/* + * multi-register-define name HW_APBH_CHn_DEBUG2 + * base 0x00000160 + * count 16 + * offset 0x70 + */ +#define HW_APBH_CHn_DEBUG2(n) (0x00000160 + (n) * 0x70) +#define BP_APBH_CHn_DEBUG2_APB_BYTES 16 +#define BM_APBH_CHn_DEBUG2_APB_BYTES 0xFFFF0000 +#define BF_APBH_CHn_DEBUG2_APB_BYTES(v) \ + (((v) << 16) & BM_APBH_CHn_DEBUG2_APB_BYTES) +#define BP_APBH_CHn_DEBUG2_AHB_BYTES 0 +#define BM_APBH_CHn_DEBUG2_AHB_BYTES 0x0000FFFF +#define BF_APBH_CHn_DEBUG2_AHB_BYTES(v) \ + (((v) << 0) & BM_APBH_CHn_DEBUG2_AHB_BYTES) + +#define HW_APBH_VERSION (0x00000800) + +#define BP_APBH_VERSION_MAJOR 24 +#define BM_APBH_VERSION_MAJOR 0xFF000000 +#define BF_APBH_VERSION_MAJOR(v) \ + (((v) << 24) & BM_APBH_VERSION_MAJOR) +#define BP_APBH_VERSION_MINOR 16 +#define BM_APBH_VERSION_MINOR 0x00FF0000 +#define BF_APBH_VERSION_MINOR(v) \ + (((v) << 16) & BM_APBH_VERSION_MINOR) +#define BP_APBH_VERSION_STEP 0 +#define BM_APBH_VERSION_STEP 0x0000FFFF +#define BF_APBH_VERSION_STEP(v) \ + (((v) << 0) & BM_APBH_VERSION_STEP) +#endif /* __ARCH_ARM___APBH_H */ diff --git a/arch/arm/mach-mx5/sdma_script_code_mx50.h b/arch/arm/mach-mx5/sdma_script_code_mx50.h new file mode 100644 index 000000000000..bac8c6f87bda --- /dev/null +++ b/arch/arm/mach-mx5/sdma_script_code_mx50.h @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +/*! + * @file sdma_script_code.h + * @brief This file contains functions of SDMA scripts code initialization + * + * The file was generated automatically. Based on sdma scripts library. + * + * @ingroup SDMA + */ +/******************************************************************************* + + SDMA RELEASE LABEL: "SDMA_CODEX.01.00.00" + +*******************************************************************************/ + +#ifndef SDMA_SCRIPT_CODE_MX50_H +#define SDMA_SCRIPT_CODE_MX50_H + + +/*! +* SDMA ROM scripts start addresses and sizes +*/ + +#define start_ADDR_MX50 0 +#define start_SIZE_MX50 18 + +#define core_ADDR_MX50 80 +#define core_SIZE_MX50 232 + +#define common_ADDR_MX50 312 +#define common_SIZE_MX50 330 + +#define ap_2_ap_ADDR_MX50 642 +#define ap_2_ap_SIZE_MX50 41 + +#define app_2_mcu_ADDR_MX50 683 +#define app_2_mcu_SIZE_MX50 64 + +#define mcu_2_app_ADDR_MX50 747 +#define mcu_2_app_SIZE_MX50 70 + +#define uart_2_mcu_ADDR_MX50 817 +#define uart_2_mcu_SIZE_MX50 74 + +#define shp_2_mcu_ADDR_MX50 891 +#define shp_2_mcu_SIZE_MX50 69 + +#define mcu_2_shp_ADDR_MX50 960 +#define mcu_2_shp_SIZE_MX50 72 + +#define uartsh_2_mcu_ADDR_MX50 1032 +#define uartsh_2_mcu_SIZE_MX50 68 + +#define loop_DMAs_routines_ADDR_MX50 1100 +#define loop_DMAs_routines_SIZE_MX50 227 + +#define test_ADDR_MX50 1327 +#define test_SIZE_MX50 63 + +#define signature_ADDR_MX50 1023 +#define signature_SIZE_MX50 1 + +/*! +* SDMA RAM scripts start addresses and sizes +*/ + +#define mcu_2_ssiapp_ADDR_MX50 6144 +#define mcu_2_ssiapp_SIZE_MX50 96 + +#define mcu_2_ssish_ADDR_MX50 6240 +#define mcu_2_ssish_SIZE_MX50 95 + +/*! +* SDMA RAM image start address and size +*/ + +#define RAM_CODE_START_ADDR_MX50 6144 +#define RAM_CODE_SIZE_MX50 191 + +/*! +* Buffer that holds the SDMA RAM image +*/ +__attribute__ ((__aligned__(4))) +static const short sdma_code_mx50[] = +{ +0xc1e3, 0x57db, 0x52f3, 0x6a01, 0x008f, 0x00d5, 0x7d01, 0x008d, +0x05a0, 0x5deb, 0x0478, 0x7d03, 0x0479, 0x7d2c, 0x7c36, 0x0479, +0x7c1f, 0x56ee, 0x0f00, 0x0660, 0x7d05, 0x6509, 0x7e43, 0x620a, +0x7e41, 0x981e, 0x620a, 0x7e3e, 0x6509, 0x7e3c, 0x0512, 0x0512, +0x02ad, 0x0760, 0x7d03, 0x55fb, 0x6dd3, 0x9829, 0x55fb, 0x1d04, +0x6dd3, 0x6ac8, 0x7f2f, 0x1f01, 0x2003, 0x4800, 0x7ce4, 0x9851, +0x55fb, 0x6dd7, 0x0015, 0x7805, 0x6209, 0x6ac8, 0x6209, 0x6ac8, +0x6dd7, 0x9850, 0x55fb, 0x6dd7, 0x0015, 0x0015, 0x7805, 0x620a, +0x6ac8, 0x620a, 0x6ac8, 0x6dd7, 0x9850, 0x55fb, 0x6dd7, 0x0015, +0x0015, 0x0015, 0x7805, 0x620b, 0x6ac8, 0x620b, 0x6ac8, 0x6dd7, +0x7c09, 0x6ddf, 0x7f07, 0x0000, 0x55eb, 0x4d00, 0x7d07, 0xc1fa, +0x57db, 0x9804, 0x0007, 0x68cc, 0x680c, 0xc213, 0xc20a, 0x9801, +0xc1d9, 0xc1e3, 0x57db, 0x52f3, 0x6a21, 0x008f, 0x00d5, 0x7d01, +0x008d, 0x05a0, 0x5deb, 0x56fb, 0x0478, 0x7d03, 0x0479, 0x7d32, +0x7c39, 0x0479, 0x7c28, 0x0b70, 0x0311, 0x53eb, 0x0f00, 0x0360, +0x7d05, 0x6509, 0x7e3f, 0x620a, 0x7e3d, 0x9882, 0x620a, 0x7e3a, +0x6509, 0x7e38, 0x0512, 0x0512, 0x02ad, 0x0760, 0x7d0a, 0x5a06, +0x7f31, 0x1f01, 0x2003, 0x4800, 0x7cea, 0x0b70, 0x0311, 0x5313, +0x98b3, 0x5a26, 0x7f27, 0x1f01, 0x2003, 0x4800, 0x7ce0, 0x0b70, +0x0311, 0x5313, 0x98b3, 0x0015, 0x7804, 0x6209, 0x5a06, 0x6209, +0x5a26, 0x98b2, 0x0015, 0x0015, 0x7804, 0x620a, 0x5a06, 0x620a, +0x5a26, 0x98b2, 0x0015, 0x0015, 0x0015, 0x7804, 0x620b, 0x5a06, +0x620b, 0x5a26, 0x7c07, 0x0000, 0x55eb, 0x4d00, 0x7d06, 0xc1fa, +0x57db, 0x9865, 0x0007, 0x680c, 0xc213, 0xc20a, 0x9862 +}; +#endif diff --git a/arch/arm/plat-mxc/include/mach/dmaengine.h b/arch/arm/plat-mxc/include/mach/dmaengine.h new file mode 100644 index 000000000000..1b28fb3b881f --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/dmaengine.h @@ -0,0 +1,493 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __ASM_ARM_ARCH_DMA_H +#define __ASM_ARM_ARCH_DMA_H + +#ifndef ARCH_DMA_PIO_WORDS +#define DMA_PIO_WORDS 15 +#else +#define DMA_PIO_WORDS ARCH_DMA_PIO_WORDS +#endif + +#define MXS_DMA_ALIGNMENT 8 + +/** + * struct mxs_dma_cmd_bits - MXS DMA hardware command bits. + * + * This structure describes the in-memory layout of the command bits in a DMA + * command. See the appropriate reference manual for a detailed description + * of what these bits mean to the DMA hardware. + */ +struct mxs_dma_cmd_bits { + unsigned int command:2; +#define NO_DMA_XFER 0x00 +#define DMA_WRITE 0x01 +#define DMA_READ 0x02 +#define DMA_SENSE 0x03 + + unsigned int chain:1; + unsigned int irq:1; + unsigned int nand_lock:1; + unsigned int nand_wait_4_ready:1; + unsigned int dec_sem:1; + unsigned int wait4end:1; + unsigned int halt_on_terminate:1; + unsigned int terminate_flush:1; + unsigned int resv2:2; + unsigned int pio_words:4; + unsigned int bytes:16; +}; + +/** + * struct mxs_dma_cmd - MXS DMA hardware command. + * + * This structure describes the in-memory layout of an entire DMA command, + * including space for the maximum number of PIO accesses. See the appropriate + * reference manual for a detailed description of what these fields mean to the + * DMA hardware. + */ +struct mxs_dma_cmd { + unsigned long next; + union { + unsigned long data; + struct mxs_dma_cmd_bits bits; + } cmd; + union { + dma_addr_t address; + unsigned long alternate; + }; + unsigned long pio_words[DMA_PIO_WORDS]; +}; + +/** + * struct mxs_dma_desc - MXS DMA command descriptor. + * + * This structure incorporates an MXS DMA hardware command structure, along + * with metadata. + * + * @cmd: The MXS DMA hardware command block. + * @flags: Flags that represent the state of this DMA descriptor. + * @address: The physical address of this descriptor. + * @buffer: A convenient place for software to put the virtual address of the + * associated data buffer (the physical address of the buffer + * appears in the DMA command). The MXS platform DMA software doesn't + * use this field -- it is provided as a convenience. + * @node: Links this structure into a list. + */ +struct mxs_dma_desc { + struct mxs_dma_cmd cmd; + unsigned int flags; +#define MXS_DMA_DESC_READY 0x80000000 +#define MXS_DMA_DESC_FIRST 0x00000001 +#define MXS_DMA_DESC_LAST 0x00000002 + dma_addr_t address; + void *buffer; + struct list_head node; +}; + +struct mxs_dma_info { + unsigned int status; +#define MXS_DMA_INFO_ERR 0x00000001 +#define MXS_DMA_INFO_ERR_STAT 0x00010000 + unsigned int buf_addr; +}; + +/** + * struct mxs_dma_chan - MXS DMA channel + * + * This structure represents a single DMA channel. The MXS platform code + * maintains an array of these structures to represent every DMA channel in the + * system (see mxs_dma_channels). + * + * @name: A human-readable string that describes how this channel is + * being used or what software "owns" it. This field is set when + * when the channel is reserved by mxs_dma_request(). + * @dev: A pointer to a struct device *, cast to an unsigned long, and + * representing the software that "owns" the channel. This field + * is set when when the channel is reserved by mxs_dma_request(). + * @lock: Arbitrates access to this channel. + * @dma: A pointer to a struct mxs_dma_device representing the driver + * code that operates this channel. + * @flags: Flag bits that represent the state of this channel. + * @active_num: If the channel is not busy, this value is zero. If the channel + * is busy, this field contains the number of DMA command + * descriptors at the head of the active list that the hardware + * has been told to process. This value is set at the moment the + * channel is enabled by mxs_dma_enable(). More descriptors may + * arrive after the channel is enabled, so the number of + * descriptors on the active list may be greater than this value. + * In fact, it should always be active_num + pending_num. + * @pending_num: The number of DMA command descriptors at the tail of the + * active list that the hardware has not been told to process. + * @active: The list of DMA command descriptors either currently being + * processed by the hardware or waiting to be processed. + * Descriptors being processed appear at the head of the list, + * while pending descriptors appear at the tail. The total number + * should always be active_num + pending_num. + * @done: The list of DMA command descriptors that have either been + * processed by the DMA hardware or aborted by a call to + * mxs_dma_disable(). + */ +struct mxs_dma_chan { + const char *name; + unsigned long dev; + spinlock_t lock; + struct mxs_dma_device *dma; + unsigned int flags; +#define MXS_DMA_FLAGS_IDLE 0x00000000 +#define MXS_DMA_FLAGS_BUSY 0x00000001 +#define MXS_DMA_FLAGS_FREE 0x00000000 +#define MXS_DMA_FLAGS_ALLOCATED 0x00010000 +#define MXS_DMA_FLAGS_VALID 0x80000000 + unsigned int active_num; + unsigned int pending_num; + struct list_head active; + struct list_head done; +}; + +/** + * struct mxs_dma_device - DMA channel driver interface. + * + * This structure represents the driver that operates a DMA channel. Every + * struct mxs_dma_chan contains a pointer to a structure of this type, which is + * installed when the driver registers to "own" the channel (see + * mxs_dma_device_register()). + */ +struct mxs_dma_device { + struct list_head node; + const char *name; + void __iomem *base; + unsigned int chan_base; + unsigned int chan_num; + unsigned int data; + struct platform_device *pdev; + + /* operations */ + int (*enable) (struct mxs_dma_chan *, unsigned int); + void (*disable) (struct mxs_dma_chan *, unsigned int); + void (*reset) (struct mxs_dma_device *, unsigned int); + void (*freeze) (struct mxs_dma_device *, unsigned int); + void (*unfreeze) (struct mxs_dma_device *, unsigned int); + int (*read_semaphore) (struct mxs_dma_device *, unsigned int); + void (*add_semaphore) (struct mxs_dma_device *, unsigned int, unsigned); + void (*info)(struct mxs_dma_device *, + unsigned int, struct mxs_dma_info *info); + void (*enable_irq) (struct mxs_dma_device *, unsigned int, int); + int (*irq_is_pending) (struct mxs_dma_device *, unsigned int); + void (*ack_irq) (struct mxs_dma_device *, unsigned int); + + void (*set_target) (struct mxs_dma_device *, unsigned int, int); +}; + +/** + * mxs_dma_device_register - Register a DMA driver. + * + * This function registers a driver for a contiguous group of DMA channels (the + * ordering of DMA channels is specified by the globally unique DMA channel + * numbers given in mach/dma.h). + * + * @pdev: A pointer to a structure that represents the driver. This structure + * contains fields that specify the first DMA channel number and the + * number of channels. + */ +extern int mxs_dma_device_register(struct mxs_dma_device *pdev); + +/** + * mxs_dma_request - Request to reserve a DMA channel. + * + * @channel: The channel number. This is one of the globally unique DMA channel + * numbers given in mach/dma.h. + * @dev: A pointer to a struct device representing the channel "owner." + * @name: A human-readable string that identifies the channel owner or the + * purpose of the channel. + */ +extern int mxs_dma_request(int channel, struct device *dev, const char *name); + +/** + * mxs_dma_release - Release a DMA channel. + * + * This function releases a DMA channel from its current owner. + * + * The channel will NOT be released if it's marked "busy" (see + * mxs_dma_enable()). + * + * @channel: The channel number. This is one of the globally unique DMA channel + * numbers given in mach/dma.h. + * @dev: A pointer to a struct device representing the channel "owner." If + * this doesn't match the owner given to mxs_dma_request(), the + * channel will NOT be released. + */ +extern void mxs_dma_release(int channel, struct device *dev); + +/** + * mxs_dma_enable - Enable a DMA channel. + * + * If the given channel has any DMA descriptors on its active list, this + * function causes the DMA hardware to begin processing them. + * + * This function marks the DMA channel as "busy," whether or not there are any + * descriptors to process. + * + * @channel: The channel number. This is one of the globally unique DMA channel + * numbers given in mach/dma.h. + */ +extern int mxs_dma_enable(int channel); + +/** + * mxs_dma_disable - Disable a DMA channel. + * + * This function shuts down a DMA channel and marks it as "not busy." Any + * descriptors on the active list are immediately moved to the head of the + * "done" list, whether or not they have actually been processed by the + * hardware. The "ready" flags of these descriptors are NOT cleared, so they + * still appear to be active. + * + * This function immediately shuts down a DMA channel's hardware, aborting any + * I/O that may be in progress, potentially leaving I/O hardware in an undefined + * state. It is unwise to call this function if there is ANY chance the hardware + * is still processing a command. + * + * @channel: The channel number. This is one of the globally unique DMA channel + * numbers given in mach/dma.h. + */ +extern void mxs_dma_disable(int channel); + +/** + * mxs_dma_reset - Resets the DMA channel hardware. + * + * @channel: The channel number. This is one of the globally unique DMA channel + * numbers given in mach/dma.h. + */ +extern void mxs_dma_reset(int channel); + +/** + * mxs_dma_freeze - Freeze a DMA channel. + * + * This function causes the channel to continuously fail arbitration for bus + * access, which halts all forward progress without losing any state. A call to + * mxs_dma_unfreeze() will cause the channel to continue its current operation + * with no ill effect. + * + * @channel: The channel number. This is one of the globally unique DMA channel + * numbers given in mach/dma.h. + */ +extern void mxs_dma_freeze(int channel); + +/** + * mxs_dma_unfreeze - Unfreeze a DMA channel. + * + * This function reverses the effect of mxs_dma_freeze(), enabling the DMA + * channel to continue from where it was frozen. + * + * @channel: The channel number. This is one of the globally unique DMA channel + * numbers given in mach/dma.h. + */ + +extern void mxs_dma_unfreeze(int channel); + +/* get dma channel information */ +extern int mxs_dma_get_info(int channel, struct mxs_dma_info *info); + +/** + * mxs_dma_cooked - Clean up processed DMA descriptors. + * + * This function removes processed DMA descriptors from the "active" list. Pass + * in a non-NULL list head to get the descriptors moved to your list. Pass NULL + * to get the descriptors moved to the channel's "done" list. Descriptors on + * the "done" list can be retrieved with mxs_dma_get_cooked(). + * + * This function marks the DMA channel as "not busy" if no unprocessed + * descriptors remain on the "active" list. + * + * @channel: The channel number. This is one of the globally unique DMA channel + * numbers given in mach/dma.h. + * @head: If this is not NULL, it is the list to which the processed + * descriptors should be moved. If this list is NULL, the descriptors + * will be moved to the "done" list. + */ +extern int mxs_dma_cooked(int channel, struct list_head *head); + +/** + * mxs_dma_read_semaphore - Read a DMA channel's hardware semaphore. + * + * As used by the MXS platform's DMA software, the DMA channel's hardware + * semaphore reflects the number of DMA commands the hardware will process, but + * has not yet finished. This is a volatile value read directly from hardware, + * so it must be be viewed as immediately stale. + * + * If the channel is not marked busy, or has finished processing all its + * commands, this value should be zero. + * + * See mxs_dma_append() for details on how DMA command blocks must be configured + * to maintain the expected behavior of the semaphore's value. + * + * @channel: The channel number. This is one of the globally unique DMA channel + * numbers given in mach/dma.h. + */ +extern int mxs_dma_read_semaphore(int channel); + +/** + * mxs_dma_irq_is_pending - Check if a DMA interrupt is pending. + * + * @channel: The channel number. This is one of the globally unique DMA channel + * numbers given in mach/dma.h. + */ +extern int mxs_dma_irq_is_pending(int channel); + +/** + * mxs_dma_enable_irq - Enable or disable DMA interrupt. + * + * This function enables the given DMA channel to interrupt the CPU. + * + * @channel: The channel number. This is one of the globally unique DMA channel + * numbers given in mach/dma.h. + * @en: True if the interrupt for this channel should be enabled. False + * otherwise. + */ +extern void mxs_dma_enable_irq(int channel, int en); + +/** + * mxs_dma_ack_irq - Clear DMA interrupt. + * + * The software that is using the DMA channel must register to receive its + * interrupts and, when they arrive, must call this function to clear them. + * + * @channel: The channel number. This is one of the globally unique DMA channel + * numbers given in mach/dma.h. + */ +extern void mxs_dma_ack_irq(int channel); + +/** + * mxs_dma_set_target - Set the target for a DMA channel. + * + * @channel: The channel number. This is one of the globally unique DMA channel + * numbers given in mach/dma.h. + * @target: Indicates the target for the channel. + */ +extern void mxs_dma_set_target(int channel, int target); + +/* mxs dma utility functions */ +extern struct mxs_dma_desc *mxs_dma_alloc_desc(void); +extern void mxs_dma_free_desc(struct mxs_dma_desc *); + +/** + * mxs_dma_cmd_address - Return the address of the command within a descriptor. + * + * @desc: The DMA descriptor of interest. + */ +static inline unsigned int mxs_dma_cmd_address(struct mxs_dma_desc *desc) +{ + return desc->address += offsetof(struct mxs_dma_desc, cmd); +} + +/** + * mxs_dma_desc_pending - Check if descriptor is on a channel's active list. + * + * This function returns the state of a descriptor's "ready" flag. This flag is + * usually set only if the descriptor appears on a channel's active list. The + * descriptor may or may not have already been processed by the hardware. + * + * The "ready" flag is set when the descriptor is submitted to a channel by a + * call to mxs_dma_append() or mxs_dma_append_list(). The "ready" flag is + * cleared when a processed descriptor is moved off the active list by a call + * to mxs_dma_cooked(). The "ready" flag is NOT cleared if the descriptor is + * aborted by a call to mxs_dma_disable(). + * + * @desc: The DMA descriptor of interest. + */ +static inline int mxs_dma_desc_pending(struct mxs_dma_desc *pdesc) +{ + return pdesc->flags & MXS_DMA_DESC_READY; +} + +/** + * mxs_dma_desc_append - Add a DMA descriptor to a channel. + * + * If the descriptor list for this channel is not empty, this function sets the + * CHAIN bit and the NEXTCMD_ADDR fields in the last descriptor's DMA command so + * it will chain to the new descriptor's command. + * + * Then, this function marks the new descriptor as "ready," adds it to the end + * of the active descriptor list, and increments the count of pending + * descriptors. + * + * The MXS platform DMA software imposes some rules on DMA commands to maintain + * important invariants. These rules are NOT checked, but they must be carefully + * applied by software that uses MXS DMA channels. + * + * Invariant: + * The DMA channel's hardware semaphore must reflect the number of DMA + * commands the hardware will process, but has not yet finished. + * + * Explanation: + * A DMA channel begins processing commands when its hardware semaphore is + * written with a value greater than zero, and it stops processing commands + * when the semaphore returns to zero. + * + * When a channel finishes a DMA command, it will decrement its semaphore if + * the DECREMENT_SEMAPHORE bit is set in that command's flags bits. + * + * In principle, it's not necessary for the DECREMENT_SEMAPHORE to be set, + * unless it suits the purposes of the software. For example, one could + * construct a series of five DMA commands, with the DECREMENT_SEMAPHORE + * bit set only in the last one. Then, setting the DMA channel's hardware + * semaphore to one would cause the entire series of five commands to be + * processed. However, this example would violate the invariant given above. + * + * Rule: + * ALL DMA commands MUST have the DECREMENT_SEMAPHORE bit set so that the DMA + * channel's hardware semaphore will be decremented EVERY time a command is + * processed. + * + * @channel: The channel number. This is one of the globally unique DMA channel + * numbers given in mach/dma.h. + * @pdesc: A pointer to the new descriptor. + */ +extern int mxs_dma_desc_append(int channel, struct mxs_dma_desc *pdesc); + +/** + * mxs_dma_desc_add_list - Add a list of DMA descriptors to a channel. + * + * This function marks all the new descriptors as "ready," adds them to the end + * of the active descriptor list, and adds the length of the list to the count + * of pending descriptors. + * + * See mxs_dma_desc_append() for important rules that apply to incoming DMA + * descriptors. + * + * @channel: The channel number. This is one of the globally unique DMA channel + * numbers given in mach/dma.h. + * @head: A pointer to the head of the list of DMA descriptors to add. + */ +extern int mxs_dma_desc_add_list(int channel, struct list_head *head); + +/** + * mxs_dma_desc_get_cooked - Retrieve processed DMA descriptors. + * + * This function moves all the descriptors from the DMA channel's "done" list to + * the head of the given list. + * + * @channel: The channel number. This is one of the globally unique DMA channel + * numbers given in mach/dma.h. + * @head: A pointer to the head of the list that will receive the + * descriptors on the "done" list. + */ +extern int mxs_dma_get_cooked(int channel, struct list_head *head); + +#endif diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx50.h b/arch/arm/plat-mxc/include/mach/iomux-mx50.h new file mode 100644 index 000000000000..2e1785add1ca --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-mx50.h @@ -0,0 +1,575 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MACH_IOMUX_MX50_H__ +#define __MACH_IOMUX_MX50_H__ + +#include <mach/iomux-v3.h> + +/* + * various IOMUX alternate output functions (1-7) + */ +typedef enum iomux_config { + IOMUX_CONFIG_ALT0, + IOMUX_CONFIG_ALT1, + IOMUX_CONFIG_ALT2, + IOMUX_CONFIG_ALT3, + IOMUX_CONFIG_ALT4, + IOMUX_CONFIG_ALT5, + IOMUX_CONFIG_ALT6, + IOMUX_CONFIG_ALT7, + IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */ + IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */ +} iomux_pin_cfg_t; + +#define NON_MUX_I 0x3FF +#define NON_PAD_I 0x7FF + +#define IOMUX_TO_IRQ_V3(pin) (MXC_GPIO_IRQ_START + pin) + +#define MX50_ELCDIF_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_DSE_HIGH) + +#define MX50_WVGA_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH) + +#define MX50_SD_PAD_CTRL (PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST) + +#define MX50_SD3_PAD_DAT (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH) +#define MX50_SD3_PAD_CMD (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_HIGH) +#define MX50_SD3_PAD_CLK (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH) +#define MX50_UART_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE) +#define MX50_I2C_PAD_CTRL (PAD_CTL_ODE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_HYS) +#define MX50_USB_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP) + +#define MX50_FEC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_22K_UP | PAD_CTL_ODE | \ + PAD_CTL_DSE_HIGH) + +#define MX50_OWIRE_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_ODE | \ + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST) + +#define MX50_PAD_KEY_COL0__GPIO_4_0 IOMUX_PAD(0x2CC, 0x20, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_ROW0__GPIO_4_1 IOMUX_PAD(0x2D0, 0x24, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_COL1__GPIO_4_2 IOMUX_PAD(0x2D4, 0x28, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_ROW1__GPIO_4_3 IOMUX_PAD(0x2D8, 0x2C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_COL2__GPIO_4_4 IOMUX_PAD(0x2DC, 0x30, 1, 0x0, 0, \ + MX50_SD_PAD_CTRL) +#define MX50_PAD_KEY_ROW2__GPIO_4_5 IOMUX_PAD(0x2E0, 0x34, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_COL3__GPIO_4_6 IOMUX_PAD(0x2E4, 0x38, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_KEY_ROW3__GPIO_4_7 IOMUX_PAD(0x2E8, 0x3C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C1_SCL__GPIO_6_18 IOMUX_PAD(0x2EC, 0x40, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C1_SDA__GPIO_6_19 IOMUX_PAD(0x2F0, 0x44, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C2_SCL__GPIO_6_20 IOMUX_PAD(0x2F4, 0x48, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C2_SDA__GPIO_6_21 IOMUX_PAD(0x2F8, 0x4C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C3_SCL__GPIO_6_22 IOMUX_PAD(0x2FC, 0x50, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_I2C3_SDA__GPIO_6_23 IOMUX_PAD(0x300, 0x54, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PWM1__GPIO_6_24 IOMUX_PAD(0x304, 0x58, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PWM2__GPIO_6_25 IOMUX_PAD(0x308, 0x5C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_OWIRE__GPIO_6_26 IOMUX_PAD(0x30C, 0x60, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPITO__GPIO_6_27 IOMUX_PAD(0x310, 0x64, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_WDOG__GPIO_6_28 IOMUX_PAD(0x314, 0x68, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_TXFS__GPIO_6_0 IOMUX_PAD(0x318, 0x6C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_TXC__GPIO_6_1 IOMUX_PAD(0x31C, 0x70, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_TXD__GPIO_6_2 IOMUX_PAD(0x320, 0x74, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_RXD__GPIO_6_3 IOMUX_PAD(0x324, 0x78, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_RXFS__GPIO_6_4 IOMUX_PAD(0x328, 0x7C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SSI_RXC__GPIO_6_5 IOMUX_PAD(0x32C, 0x80, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART1_TXD__GPIO_6_6 IOMUX_PAD(0x330, 0x84, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART1_RXD__GPIO_6_7 IOMUX_PAD(0x334, 0x88, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART1_CTS__GPIO_6_8 IOMUX_PAD(0x338, 0x8C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART1_RTS__GPIO_6_9 IOMUX_PAD(0x33C, 0x90, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART2_TXD__GPIO_6_10 IOMUX_PAD(0x340, 0x94, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART2_RXD__GPIO_6_11 IOMUX_PAD(0x344, 0x98, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART2_CTS__GPIO_6_12 IOMUX_PAD(0x348, 0x9C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART2_RTS__GPIO_6_13 IOMUX_PAD(0x34C, 0xA0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART3_TXD__GPIO_6_14 IOMUX_PAD(0x350, 0xA4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART3_RXD__GPIO_6_15 IOMUX_PAD(0x354, 0xA8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART4_TXD__GPIO_6_16 IOMUX_PAD(0x358, 0xAC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_UART4_RXD__GPIO_6_17 IOMUX_PAD(0x35C, 0xB0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_CSPI_SCLK__GPIO_4_8 IOMUX_PAD(0x360, 0xB4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_CSPI_MOSI__GPIO_4_9 IOMUX_PAD(0x364, 0xB8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_CSPI_MISO__GPIO_4_10 IOMUX_PAD(0x368, 0xBC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_CSPI_SS0__GPIO_4_11 IOMUX_PAD(0x36C, 0xC0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI1_SCLK__GPIO_4_12 IOMUX_PAD(0x370, 0xC4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI1_MOSI__GPIO_4_13 IOMUX_PAD(0x374, 0xC8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI1_MISO__GPIO_4_14 IOMUX_PAD(0x378, 0xCC, 1, 0x0, 0, NO_PAD_CTRL) + +/* HP detect */ +#define MX50_PAD_ECSPI1_SS0__GPIO_4_15 IOMUX_PAD(0x37C, 0xD0, 1, 0x0, 0, \ + PAD_CTL_PUS_100K_UP) +#define MX50_PAD_ECSPI2_SCLK__GPIO_4_16 IOMUX_PAD(0x380, 0xD4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_MOSI__GPIO_4_17 IOMUX_PAD(0x384, 0xD8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_ECSPI2_MISO__GPIO_4_18 IOMUX_PAD(0x388, 0xDC, 1, 0x0, 0, \ + PAD_CTL_PUS_100K_UP) +#define MX50_PAD_ECSPI2_SS0__GPIO_4_19 IOMUX_PAD(0x38C, 0xE0, 1, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD1_CLK__GPIO_5_0 IOMUX_PAD(0x390, 0xE4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD1_CMD__GPIO_5_1 IOMUX_PAD(0x394, 0xE8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD1_D0__GPIO_5_2 IOMUX_PAD(0x398, 0xEC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD1_D1__GPIO_5_3 IOMUX_PAD(0x39C, 0xF0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD1_D2__GPIO_5_4 IOMUX_PAD(0x3A0, 0xF4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD1_D3__GPIO_5_5 IOMUX_PAD(0x3A4, 0xF8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_CLK__GPIO_5_6 IOMUX_PAD(0x3A8, 0xFC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_CMD__GPIO_5_7 IOMUX_PAD(0x3AC, 0x100, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D0__GPIO_5_8 IOMUX_PAD(0x3B0, 0x104, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D1__GPIO_5_9 IOMUX_PAD(0x3B4, 0x108, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D2__GPIO_5_10 IOMUX_PAD(0x3B8, 0x10C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D3__GPIO_5_11 IOMUX_PAD(0x3BC, 0x110, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D4__GPIO_5_12 IOMUX_PAD(0x3C0, 0x114, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D5__GPIO_5_13 IOMUX_PAD(0x3C4, 0x118, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D6__GPIO_5_14 IOMUX_PAD(0x3C8, 0x11C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_D7__GPIO_5_15 IOMUX_PAD(0x3CC, 0x120, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD2_WP__GPIO_5_16 IOMUX_PAD(0x3D0, 0x124, 1, 0x0, 0, MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_CD__GPIO_5_17 IOMUX_PAD(0x3D4, 0x128, 1, 0x0, 0, MX50_SD_PAD_CTRL) + +#define MX50_PAD_PMIC_ON_REQ__PMIC_ON_REQ IOMUX_PAD(0x3D8, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ IOMUX_PAD(0x3DC, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PMIC_PORT_B__PMIC_PORT_B IOMUX_PAD(0x3E0, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PMIC_BOOT_MODE1__PMIC_BOOT_MODE1 IOMUX_PAD(0x3E4, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PMIC_RESET_IN_B__PMIC_RESET_IN_B IOMUX_PAD(0x3E8, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PMIC_BOOT_MODE0__PMIC_BOOT_MODE0 IOMUX_PAD(0x3EC, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PMIC_TEST_MODE__PMIC_TEST_MODE IOMUX_PAD(0x3F0, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PMIC_JTAG_TMS__PMIC_JTAG_TMS IOMUX_PAD(0x3F4, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PMIC_JTAG_MOD__PMIC_JTAG_MOD IOMUX_PAD(0x3F8, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PMIC_JTAG_TRSTB__PMIC_JTAG_TRSTB IOMUX_PAD(0x3FC, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PMIC_JTAG_TDI__PMIC_JTAG_TDI IOMUX_PAD(0x400, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PMIC_JTAG_TCK__PMIC_JTAG_TCK IOMUX_PAD(0x404, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_PMIC_JTAG_TDO__PMIC_JTAG_TDO IOMUX_PAD(0x408, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_DISP_D0__GPIO_2_0 IOMUX_PAD(0x40C, 0x12C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D1__GPIO_2_1 IOMUX_PAD(0x410, 0x130, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D2__GPIO_2_2 IOMUX_PAD(0x414, 0x134, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D3__GPIO_2_3 IOMUX_PAD(0x418, 0x138, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D4__GPIO_2_4 IOMUX_PAD(0x41C, 0x13C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D5__GPIO_2_5 IOMUX_PAD(0x420, 0x140, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D6__GPIO_2_6 IOMUX_PAD(0x424, 0x144, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D7__GPIO_2_7 IOMUX_PAD(0x428, 0x148, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_WR__GPIO_2_16 IOMUX_PAD(0x42C, 0x14C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_RD__GPIO_2_19 IOMUX_PAD(0x430, 0x150, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_RS__GPIO_2_17 IOMUX_PAD(0x434, 0x154, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_CS__GPIO_2_21 IOMUX_PAD(0x438, 0x158, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_BUSY__GPIO_2_18 IOMUX_PAD(0x43C, 0x15C, 1, 0x0, 0, \ + MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_RESET__GPIO_2_20 IOMUX_PAD(0x440, 0x160, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD3_CMD__GPIO_5_18 IOMUX_PAD(0x444, 0x164, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD3_CLK__GPIO_5_19 IOMUX_PAD(0x448, 0x168, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD3_D0__GPIO_5_20 IOMUX_PAD(0x44C, 0x16C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD3_D1__GPIO_5_21 IOMUX_PAD(0x450, 0x170, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD3_D2__GPIO_5_22 IOMUX_PAD(0x454, 0x174, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD3_D3__GPIO_5_23 IOMUX_PAD(0x458, 0x178, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD3_D4__GPIO_5_24 IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD3_D5__GPIO_5_25 IOMUX_PAD(0x460, 0x180, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD3_D6__GPIO_5_26 IOMUX_PAD(0x464, 0x184, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD3_D7__GPIO_5_27 IOMUX_PAD(0x468, 0x188, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_SD3_WP__GPIO_5_28 IOMUX_PAD(0x46C, 0x18C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D8__GPIO_2_8 IOMUX_PAD(0x470, 0x190, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D9__GPIO_2_9 IOMUX_PAD(0x474, 0x194, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D10__GPIO_2_10 IOMUX_PAD(0x478, 0x198, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D11__GPIO_2_11 IOMUX_PAD(0x47C, 0x19C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D12__GPIO_2_12 IOMUX_PAD(0x480, 0x1A0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D13__GPIO_2_13 IOMUX_PAD(0x484, 0x1A4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D14__GPIO_2_14 IOMUX_PAD(0x488, 0x1A8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_DISP_D15__GPIO_2_15 IOMUX_PAD(0x48C, 0x1AC, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX50_PAD_EPDC_D0__GPIO_3_0 IOMUX_PAD(0x54C, 0x1B0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D1__GPIO_3_1 IOMUX_PAD(0x550, 0x1B4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D2__GPIO_3_2 IOMUX_PAD(0x554, 0x1B8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D3__GPIO_3_3 IOMUX_PAD(0x558, 0x1BC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D4__GPIO_3_4 IOMUX_PAD(0x55C, 0x1C0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D5__GPIO_3_5 IOMUX_PAD(0x560, 0x1C4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D6__GPIO_3_6 IOMUX_PAD(0x564, 0x1C8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D7__GPIO_3_7 IOMUX_PAD(0x568, 0x1CC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D8__GPIO_3_8 IOMUX_PAD(0x56C, 0x1D0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D9__GPIO_3_9 IOMUX_PAD(0x570, 0x1D4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D10__GPIO_3_10 IOMUX_PAD(0x574, 0x1D8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D11__GPIO_3_11 IOMUX_PAD(0x578, 0x1DC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D12__GPIO_3_12 IOMUX_PAD(0x57C, 0x1E0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D13__GPIO_3_13 IOMUX_PAD(0x580, 0x1E4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D14__GPIO_3_14 IOMUX_PAD(0x584, 0x1E8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_D15__GPIO_3_15 IOMUX_PAD(0x588, 0x1EC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDCLK__GPIO_3_16 IOMUX_PAD(0x58C, 0x1F0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDSP__GPIO_3_17 IOMUX_PAD(0x590, 0x1F4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDOE__GPIO_3_18 IOMUX_PAD(0x594, 0x1F8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDRL__GPIO_3_19 IOMUX_PAD(0x598, 0x1FC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCLK__GPIO_3_20 IOMUX_PAD(0x59C, 0x200, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDOEZ__GPIO_3_21 IOMUX_PAD(0x5A0, 0x204, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDOED__GPIO_3_22 IOMUX_PAD(0x5A4, 0x208, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDOE__GPIO_3_23 IOMUX_PAD(0x5A8, 0x20C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDLE__GPIO_3_24 IOMUX_PAD(0x5AC, 0x210, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCLKN__GPIO_3_25 IOMUX_PAD(0x5B0, 0x214, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDSHR__GPIO_3_26 IOMUX_PAD(0x5B4, 0x218, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCOM__GPIO_3_27 IOMUX_PAD(0x5B8, 0x21C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRSTAT__GPIO_3_28 IOMUX_PAD(0x5BC, 0x220, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL0__GPIO_3_29 IOMUX_PAD(0x5C0, 0x224, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL1__GPIO_3_30 IOMUX_PAD(0x5C4, 0x228, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL2__GPIO_3_31 IOMUX_PAD(0x5C8, 0x22C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_PWRCTRL3__GPIO_4_20 IOMUX_PAD(0x5CC, 0x230, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_VCOM0__GPIO_4_21 IOMUX_PAD(0x5D0, 0x234, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_VCOM1__GPIO_4_22 IOMUX_PAD(0x5D4, 0x238, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_BDR0__GPIO_4_23 IOMUX_PAD(0x5D8, 0x23C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_BDR1__GPIO_4_24 IOMUX_PAD(0x5DC, 0x240, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE0__GPIO_4_25 IOMUX_PAD(0x5E0, 0x244, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE1__GPIO_4_26 IOMUX_PAD(0x5E4, 0x248, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE2__GPIO_4_27 IOMUX_PAD(0x5E8, 0x24C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE3__GPIO_4_28 IOMUX_PAD(0x5EC, 0x250, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE4__GPIO_4_29 IOMUX_PAD(0x5F0, 0x254, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE5__GPIO_4_30 IOMUX_PAD(0x5F4, 0x258, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA0__GPIO_1_0 IOMUX_PAD(0x5F8, 0x25C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA1__GPIO_1_1 IOMUX_PAD(0x5FC, 0x260, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA2__GPIO_1_2 IOMUX_PAD(0x600, 0x264, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA3__GPIO_1_3 IOMUX_PAD(0x604, 0x268, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA4__GPIO_1_4 IOMUX_PAD(0x608, 0x26C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA5__GPIO_1_5 IOMUX_PAD(0x60C, 0x270, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA6__GPIO_1_6 IOMUX_PAD(0x610, 0x274, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA7__GPIO_1_7 IOMUX_PAD(0x614, 0x278, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA8__GPIO_1_8 IOMUX_PAD(0x618, 0x27C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA9__GPIO_1_9 IOMUX_PAD(0x61C, 0x280, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA10__GPIO_1_10 IOMUX_PAD(0x620, 0x284, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA11__GPIO_1_11 IOMUX_PAD(0x624, 0x288, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA12__GPIO_1_12 IOMUX_PAD(0x628, 0x28C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA13__GPIO_1_13 IOMUX_PAD(0x62C, 0x290, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA14__GPIO_1_14 IOMUX_PAD(0x630, 0x294, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_DA15__GPIO_1_15 IOMUX_PAD(0x634, 0x298, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_CS2__GPIO_1_16 IOMUX_PAD(0x638, 0x29C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_CS1__GPIO_1_17 IOMUX_PAD(0x63C, 0x2A0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_CS0__GPIO_1_18 IOMUX_PAD(0x640, 0x2A4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_EB0__GPIO_1_19 IOMUX_PAD(0x644, 0x2A8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_EB1__GPIO_1_20 IOMUX_PAD(0x648, 0x2AC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_WAIT__GPIO_1_21 IOMUX_PAD(0x64C, 0x2B0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_BCLK__GPIO_1_22 IOMUX_PAD(0x650, 0x2B4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_RDY__GPIO_1_23 IOMUX_PAD(0x654, 0x2B8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_OE__GPIO_1_24 IOMUX_PAD(0x658, 0x2BC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_RW__GPIO_1_25 IOMUX_PAD(0x65C, 0x2C0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_LBA__GPIO_1_26 IOMUX_PAD(0x660, 0x2C4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX50_PAD_EIM_CRE__GPIO_1_27 IOMUX_PAD(0x664, 0x2C8, 1, 0x0, 0, NO_PAD_CTRL) + + +/* SD1 */ +#define MX50_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x394, 0xE8, \ + IOMUX_CONFIG_SION, 0x0, 0, \ + MX50_SD_PAD_CTRL) +#define MX50_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x390, 0xE4, \ + IOMUX_CONFIG_SION, 0x0, 0, \ + MX50_SD_PAD_CTRL) +#define MX50_PAD_SD1_D0__SD1_D0 IOMUX_PAD(0x398, 0xEC, 0, 0x0, 0, \ + MX50_SD_PAD_CTRL) +#define MX50_PAD_SD1_D1__SD1_D1 IOMUX_PAD(0x39C, 0xF0, 0, 0x0, 0, \ + MX50_SD_PAD_CTRL) +#define MX50_PAD_SD1_D2__SD1_D2 IOMUX_PAD(0x3A0, 0xF4, 0, 0x0, 0, \ + MX50_SD_PAD_CTRL) +#define MX50_PAD_SD1_D3__SD1_D3 IOMUX_PAD(0x3A4, 0xF8, 0, 0x0, 0, \ + MX50_SD_PAD_CTRL) + +/* SD2 */ +#define MX50_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x3A8, 0xFC, \ + IOMUX_CONFIG_SION, 0x0, 0, \ + MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x3AC, 0x100, \ + IOMUX_CONFIG_SION, 0x0, 0, \ + MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D0__SD2_D0 IOMUX_PAD(0x3B0, 0x104, 0, 0x0, 0, \ + MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D1__SD2_D1 IOMUX_PAD(0x3B4, 0x108, 0, 0x0, 0, \ + MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D2__SD2_D2 IOMUX_PAD(0x3B8, 0x10C, 0, 0x0, 0, \ + MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D3__SD2_D3 IOMUX_PAD(0x3BC, 0x110, 0, 0x0, 0, \ + MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D4__SD2_D4 IOMUX_PAD(0x3C0, 0x114, 0, 0x0, 0, \ + MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D5__SD2_D5 IOMUX_PAD(0x3C4, 0x118, 0, 0x0, 0, \ + MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D6__SD2_D6 IOMUX_PAD(0x3C8, 0x11C, 0, 0x0, 0, \ + MX50_SD_PAD_CTRL) +#define MX50_PAD_SD2_D7__SD2_D7 IOMUX_PAD(0x3CC, 0x120, 0, 0x0, 0, \ + MX50_SD_PAD_CTRL) + +/* SD3 */ +#define MX50_PAD_SD3_CMD__SD3_CMD IOMUX_PAD(0x444, 0x164, 0, 0x0, 0, \ + MX50_SD3_PAD_CMD) +#define MX50_PAD_SD3_CLK__SD3_CLK IOMUX_PAD(0x448, 0x168, 0, 0x0, 0, \ + MX50_SD3_PAD_CLK) +#define MX50_PAD_SD3_D0__SD3_D0 IOMUX_PAD(0x44C, 0x16C, 0, 0x0, 0, \ + MX50_SD3_PAD_DAT) +#define MX50_PAD_SD3_D1__SD3_D1 IOMUX_PAD(0x450, 0x170, 0, 0x0, 0, \ + MX50_SD3_PAD_DAT) +#define MX50_PAD_SD3_D2__SD3_D2 IOMUX_PAD(0x454, 0x174, 0, 0x0, 0, \ + MX50_SD3_PAD_DAT) +#define MX50_PAD_SD3_D3__SD3_D3 IOMUX_PAD(0x458, 0x178, 0, 0x0, 0, \ + MX50_SD3_PAD_DAT) +#define MX50_PAD_SD3_D4__SD3_D4 IOMUX_PAD(0x45C, 0x17C, 0, 0x0, 0, \ + MX50_SD3_PAD_DAT) +#define MX50_PAD_SD3_D5__SD3_D5 IOMUX_PAD(0x460, 0x180, 0, 0x0, 0, \ + MX50_SD3_PAD_DAT) +#define MX50_PAD_SD3_D6__SD3_D6 IOMUX_PAD(0x464, 0x184, 0, 0x0, 0, \ + MX50_SD3_PAD_DAT) +#define MX50_PAD_SD3_D7__SD3_D7 IOMUX_PAD(0x468, 0x188, 0, 0x0, 0, \ + MX50_SD3_PAD_DAT) + +/* OWIRE */ +#define MX50_PAD_OWIRE__OWIRE IOMUX_PAD(0x30C, 0x60, 0, 0x0, 0, \ + MX50_OWIRE_PAD_CTRL) + +/* SSI */ +#define MX50_PAD_SSI_TXFS__SSI_TXFS IOMUX_PAD(0x318, 0x6C, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_SSI_TXC__SSI_TXC IOMUX_PAD(0x31C, 0x70, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_SSI_TXD__SSI_TXD IOMUX_PAD(0x320, 0x74, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_SSI_RXD__SSI_RXD IOMUX_PAD(0x324, 0x78, 0, 0x0, 0, \ + NO_PAD_CTRL) + +/* UART1 and UART2 */ +#define MX50_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x330, 0x84, 0, 0x0, 0, \ + MX50_UART_PAD_CTRL) +#define MX50_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x334, 0x88, 0, 0x7c4, 1, \ + MX50_UART_PAD_CTRL) +#define MX50_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x338, 0x8C, 0, 0x0, 0, \ + MX50_UART_PAD_CTRL) +#define MX50_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x33C, 0x90, 0, 0x7c0, 1, \ + MX50_UART_PAD_CTRL) +#define MX50_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x340, 0x94, 0, 0x0, 0, \ + MX50_UART_PAD_CTRL) +#define MX50_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x344, 0x98, 0, 0x7cc, 3, \ + MX50_UART_PAD_CTRL) +#define MX50_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x348, 0x9C, 0, 0x0, 0, \ + MX50_UART_PAD_CTRL) +#define MX50_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x34C, 0xA0, 0, 0x7c8, 3, \ + MX50_UART_PAD_CTRL) + +/* I2C1, I2C2, I2C3 */ +#define MX50_PAD_I2C1_SCL__I2C1_SCL IOMUX_PAD(0x2EC, 0x40, \ + IOMUX_CONFIG_SION, 0x0, 0, \ + MX50_I2C_PAD_CTRL) +#define MX50_PAD_I2C1_SDA__I2C1_SDA IOMUX_PAD(0x2F0, 0x44, \ + IOMUX_CONFIG_SION, 0x0, 0, \ + MX50_I2C_PAD_CTRL) +#define MX50_PAD_I2C2_SCL__I2C2_SCL IOMUX_PAD(0x2F4, 0x48, \ + IOMUX_CONFIG_SION, 0x0, 0, \ + MX50_I2C_PAD_CTRL) +#define MX50_PAD_I2C2_SDA__I2C2_SDA IOMUX_PAD(0x2F8, 0x4C, \ + IOMUX_CONFIG_SION, 0x0, 0, \ + MX50_I2C_PAD_CTRL) +#define MX50_PAD_I2C3_SCL__I2C3_SCL IOMUX_PAD(0x2FC, 0x50, \ + IOMUX_CONFIG_SION, 0x0, 0, \ + MX50_I2C_PAD_CTRL) +#define MX50_PAD_I2C3_SDA__I2C3_SDA IOMUX_PAD(0x300, 0x54, \ + IOMUX_CONFIG_SION, 0x0, 0, \ + MX50_I2C_PAD_CTRL) + +/* EPDC */ +#define MX50_PAD_EPDC_D0__EPDC_D0 IOMUX_PAD(0x54C, 0x1B0, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_D1__EPDC_D1 IOMUX_PAD(0x550, 0x1B4, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_D2__EPDC_D2 IOMUX_PAD(0x554, 0x1B8, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_D3__EPDC_D3 IOMUX_PAD(0x558, 0x1BC, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_D4__EPDC_D4 IOMUX_PAD(0x55C, 0x1C0, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_D5__EPDC_D5 IOMUX_PAD(0x560, 0x1C4, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_D6__EPDC_D6 IOMUX_PAD(0x564, 0x1C8, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_D7__EPDC_D7 IOMUX_PAD(0x568, 0x1CC, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK IOMUX_PAD(0x58C, 0x1F0, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDSP__EPDC_GDSP IOMUX_PAD(0x590, 0x1F4, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDOE__EPDC_GDOE IOMUX_PAD(0x594, 0x1F8, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_GDRL__EPDC_GDRL IOMUX_PAD(0x598, 0x1FC, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCLK__EPDC_SDCLK IOMUX_PAD(0x59C, 0x200, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDOE__EPDC_SDOE IOMUX_PAD(0x5A8, 0x20C, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDLE__EPDC_SDLE IOMUX_PAD(0x5AC, 0x210, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDSHR__EPDC_SDSHR IOMUX_PAD(0x5B4, 0x218, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_BDR0__EPDC_BDR0 IOMUX_PAD(0x5D8, 0x23C, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE0__EPDC_SDCE0 IOMUX_PAD(0x5E0, 0x244, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE1__EPDC_SDCE1 IOMUX_PAD(0x5E4, 0x248, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_EPDC_SDCE2__EPDC_SDCE2 IOMUX_PAD(0x5E8, 0x24C, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_DISP_D8__DISP_D8 IOMUX_PAD(0x470, 0x190, 0, \ + 0x0, 0, MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D9__DISP_D9 IOMUX_PAD(0x474, 0x194, 0, 0x0, 0, \ + MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D10__DISP_D10 IOMUX_PAD(0x478, 0x198, 0, 0x0, 0, \ + MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D11__DISP_D11 IOMUX_PAD(0x47C, 0x19C, 0, 0x0, 0, \ + MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D12__DISP_D12 IOMUX_PAD(0x480, 0x1A0, 0, 0x0, 0, \ + MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D13__DISP_D13 IOMUX_PAD(0x484, 0x1A4, 0, 0x0, 0, \ + MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D14__DISP_D14 IOMUX_PAD(0x488, 0x1A8, 0, 0x0, 0, \ + MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_D15__DISP_D15 IOMUX_PAD(0x48C, 0x1AC, 0, 0x0, 0, \ + MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_RS__ELCDIF_VSYNC IOMUX_PAD(0x434, 0x154, 2, 0x0, 0, \ + MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_CS__ELCDIF_HSYNC IOMUX_PAD(0x438, 0x158, 2, 0x0, 0, \ + MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_RD__ELCDIF_EN IOMUX_PAD(0x430, 0x150, 2, 0x0, 0, \ + MX50_ELCDIF_PAD_CTRL) +#define MX50_PAD_DISP_WR__ELCDIF_PIXCLK IOMUX_PAD(0x42C, 0x14C, 2, 0x0, 0, \ + MX50_ELCDIF_PAD_CTRL) + +/* USB */ +#define MX50_PAD_EPITO__USBH1_PWR IOMUX_PAD(0x310, 0x64, 2, 0x0, 0, \ + PAD_CTL_PKE | PAD_CTL_DSE_HIGH) +#define MX50_PAD_OWIRE__USBH1_OC IOMUX_PAD(0x30C, 0x60, 2, 0x0, 0, \ + MX50_USB_PAD_CTRL) +#define MX50_PAD_PWM2__USBOTG_PWR IOMUX_PAD(0x308, 0x5C, 2, 0x0, 0, \ + PAD_CTL_PKE | PAD_CTL_DSE_HIGH) +#define MX50_PAD_PWM1__USBOTG_OC IOMUX_PAD(0x304, 0x58, 2, 0x7E8, 1, \ + MX50_USB_PAD_CTRL) +#define MX50_PAD_I2C3_SCL__USBOTG_OC IOMUX_PAD(0x2FC, 0x50, 7, 0x7E8, 0, \ + MX50_USB_PAD_CTRL) + + +/* FEC */ +#define MX50_PAD_SSI_RXC__FEC_MDIO IOMUX_PAD(0x32C, 0x80, 6, 0x774, 1, \ + MX50_FEC_PAD_CTRL) +#define MX50_PAD_DISP_D0__FEC_TXCLK IOMUX_PAD(0x40C, 0x12C, 2, 0x0, 0, \ + PAD_CTL_HYS | PAD_CTL_PKE) +#define MX50_PAD_DISP_D1__FEC_RX_ER IOMUX_PAD(0x410, 0x130, 2, 0x788, 0, \ + PAD_CTL_HYS | PAD_CTL_PKE) +#define MX50_PAD_DISP_D2__FEC_RX_DV IOMUX_PAD(0x414, 0x134, 2, 0x784, 0, \ + PAD_CTL_HYS | PAD_CTL_PKE) +#define MX50_PAD_DISP_D3__FEC_RXD1 IOMUX_PAD(0x418, 0x138, 2, 0x77C, 0, \ + PAD_CTL_HYS | PAD_CTL_PKE) +#define MX50_PAD_DISP_D4__FEC_RXD0 IOMUX_PAD(0x41C, 0x13C, 2, 0x778, 0, \ + PAD_CTL_HYS | PAD_CTL_PKE) +#define MX50_PAD_DISP_D5__FEC_TX_EN IOMUX_PAD(0x420, 0x140, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PAD_DISP_D6__FEC_TXD1 IOMUX_PAD(0x424, 0x144, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PAD_DISP_D7__FEC_TXD0 IOMUX_PAD(0x428, 0x148, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PAD_SSI_RXFS__FEC_MDC IOMUX_PAD(0x328, 0x7C, 6, 0x0, 0, \ + PAD_CTL_DSE_HIGH) + +/* WVGA */ +#define MX50_PAD_DISP_D0__DISP_D0 IOMUX_PAD(0x40C, 0x12C, 0, 0x0, 0, \ + MX50_WVGA_PAD_CTRL) +#define MX50_PAD_DISP_D1__DISP_D1 IOMUX_PAD(0x410, 0x130, 0, 0x0, 0, \ + MX50_WVGA_PAD_CTRL) +#define MX50_PAD_DISP_D2__DISP_D2 IOMUX_PAD(0x414, 0x134, 0, 0x0, 0, \ + MX50_WVGA_PAD_CTRL) +#define MX50_PAD_DISP_D3__DISP_D3 IOMUX_PAD(0x418, 0x138, 0, 0x0, 0, \ + MX50_WVGA_PAD_CTRL) +#define MX50_PAD_DISP_D4__DISP_D4 IOMUX_PAD(0x41C, 0x13C, 0, 0x0, 0, \ + MX50_WVGA_PAD_CTRL) +#define MX50_PAD_DISP_D5__DISP_D5 IOMUX_PAD(0x420, 0x140, 0, 0x0, 0, \ + MX50_WVGA_PAD_CTRL) +#define MX50_PAD_DISP_D6__DISP_D6 IOMUX_PAD(0x424, 0x144, 0, 0x0, 0, \ + MX50_WVGA_PAD_CTRL) +#define MX50_PAD_DISP_D7__DISP_D7 IOMUX_PAD(0x428, 0x148, 0, 0x0, 0, \ + MX50_WVGA_PAD_CTRL) + +/* CSPI */ +#define MX50_PAD_CSPI_SS0__CSPI_SS0 IOMUX_PAD(0x36C, 0xC0, 0, 0x0, 0, \ + PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_DSE_HIGH) +#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1 IOMUX_PAD(0x374, 0xC8, 2, 0x0, 0, \ + PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_22K_UP | \ + PAD_CTL_DSE_HIGH) +#define MX50_PAD_CSPI_MOSI__CSPI_MOSI IOMUX_PAD(0x364, 0xB8, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_CSPI_MISO__CSPI_MISO IOMUX_PAD(0x368, 0xBC, 0, 0x0, 0, \ + NO_PAD_CTRL) + +/* NAND */ +#define MX50_PIN_EIM_DA8__NANDF_CLE IOMUX_PAD(0x618, 0x27C, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_EIM_DA9__NANDF_ALE IOMUX_PAD(0x61C, 0x280, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_EIM_DA10__NANDF_CE0 IOMUX_PAD(0x620, 0x284, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_EIM_DA11__NANDF_CE1 IOMUX_PAD(0x624, 0x288, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_EIM_DA12__NANDF_CE2 IOMUX_PAD(0x628, 0x28C, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_EIM_DA13__NANDF_CE3 IOMUX_PAD(0x62C, 0x290, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_EIM_DA14__NANDF_READY IOMUX_PAD(0x630, 0x294, 2, 0x7B4, 2, \ + PAD_CTL_PKE | \ + PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP) +#define MX50_PIN_EIM_DA15__NANDF_DQS IOMUX_PAD(0x634, 0x298, 2, 0x7B0, 2, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_SD3_D4__NANDF_D0 IOMUX_PAD(0x45C, 0x17C, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_SD3_D5__NANDF_D1 IOMUX_PAD(0x460, 0x180, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_SD3_D6__NANDF_D2 IOMUX_PAD(0x464, 0x184, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_SD3_D7__NANDF_D3 IOMUX_PAD(0x468, 0x188, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_SD3_D0__NANDF_D4 IOMUX_PAD(0x44C, 0x16C, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_SD3_D1__NANDF_D5 IOMUX_PAD(0x450, 0x170, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_SD3_D2__NANDF_D6 IOMUX_PAD(0x454, 0x174, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_SD3_D3__NANDF_D7 IOMUX_PAD(0x458, 0x178, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_SD3_CLK__NANDF_RDN IOMUX_PAD(0x448, 0x168, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_SD3_CMD__NANDF_WRN IOMUX_PAD(0x444, 0x164, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) +#define MX50_PIN_SD3_WP__NANDF_RESETN IOMUX_PAD(0x46C, 0x18C, 2, 0x0, 0, \ + PAD_CTL_DSE_HIGH) + +/* Keypad */ +#define MX50_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x2CC, 0x20, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x2D0, 0x24, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x2D4, 0x28, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x2D8, 0x2C, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x2DC, 0x30, 0, 0x0, 0, \ + MX50_SD_PAD_CTRL) +#define MX50_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x2E0, 0x34, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x2E4, 0x38, 0, 0x0, 0, \ + NO_PAD_CTRL) +#define MX50_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x2E8, 0x3C, 0, 0x0, 0, \ + NO_PAD_CTRL) + +#endif /* __MACH_IOMUX_MX53_H__ */ + diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h new file mode 100644 index 000000000000..0125534a4f34 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -0,0 +1,416 @@ +/* + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __MACH_IOMUX_MX51_H__ +#define __MACH_IOMUX_MX51_H__ + +#include <mach/iomux-v3.h> + +/* + * various IOMUX alternate output functions (1-7) + */ +typedef enum iomux_config { + IOMUX_CONFIG_ALT0, + IOMUX_CONFIG_ALT1, + IOMUX_CONFIG_ALT2, + IOMUX_CONFIG_ALT3, + IOMUX_CONFIG_ALT4, + IOMUX_CONFIG_ALT5, + IOMUX_CONFIG_ALT6, + IOMUX_CONFIG_ALT7, + IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */ + IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */ +} iomux_pin_cfg_t; + +#define IOMUX_TO_IRQ_V3(pin) (MXC_GPIO_IRQ_START + pin) + +/* Pad control groupings */ +#define MX51_UART1_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_DSE_HIGH) +#define MX51_UART2_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) +#define MX51_UART3_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) +#define MX51_I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS) +#define MX51_USBH1_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ + PAD_CTL_PKE | PAD_CTL_HYS) +#define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \ + PAD_CTL_SRE_FAST) + +#define MX51_PAD_CTRL_1 (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_HYS) +#define MX51_PAD_CTRL_2 (PAD_CTL_HYS | PAD_CTL_PKE) +#define MX51_PAD_CTRL_3 (PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) +#define MX51_PAD_CTRL_4 (PAD_CTL_DVS | PAD_CTL_HYS | PAD_CTL_PKE) +#define MX51_PAD_CTRL_5 (PAD_CTL_DVS | PAD_CTL_DSE_HIGH) + +#define MX51_PAD_CTRL_6 (PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_HYS | PAD_CTL_DVS) +#define MX51_PAD_CTRL_7 MX51_UART2_PAD_CTRL +#define MX51_PAD_CTRL_8 (PAD_CTL_HYS | PAD_CTL_PKE | \ + PAD_CTL_PUS_22K_UP | PAD_CTL_DSE_HIGH) +#define MX51_PAD_CTRL_9 (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP) +#define MX51_PAD_CTRL_10 (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP) +#define MX51_PAD_CTRL_11 (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) +#define MX51_PAD_CTRL_12 (PAD_CTL_PKE | PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW) +#define MX51_PAD_CTRL_13 (PAD_CTL_PKE | PAD_CTL_PUE) + +#define MX51_SDHC_PAD_CTRL (PAD_CTL_DVS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) + + + +/* + * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named + * GPIO_<unit>_<num> see also iomux-v3.h + */ + +/* PAD MUX ALT INPSE PATH PADCTRL */ +/* EIM */ +#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x7a8, 0x01c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x7a8, 0x020, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x7a8, 0x024, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x7a8, 0x028, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x7ac, 0x02c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x7ac, 0x030, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x7ac, 0x034, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x7ac, 0x038, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x7b0, 0x03c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x7b0, 0x040, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x7b0, 0x044, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x7b0, 0x048, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x7bc, 0x04c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x7bc, 0x050, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x7bc, 0x054, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x7bc, 0x058, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D16__GPIO_2_0 IOMUX_PAD(0x3f0, 0x05c, 1, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_EIM_D16__I2C1_SDA IOMUX_PAD(0x3f0, 0x05c, IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION, \ + 0x9b4, 0, MX51_I2C_PAD_CTRL) +#define MX51_PAD_EIM_D17__GPIO_2_1 IOMUX_PAD(0x3f4, 0x060, 1, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_EIM_D18__GPIO_2_2 IOMUX_PAD(0x3f8, 0x064, 1, 0x0, 0, MX51_PAD_CTRL_10 | MX51_PAD_CTRL_13) +#define MX51_PAD_EIM_D19__GPIO_2_3 IOMUX_PAD(0x3fc, 0x068, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D19__I2C1_SCL IOMUX_PAD(0x3fc, 0x068, IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION, \ + 0x9b0, 0, MX51_I2C_PAD_CTRL) +#define MX51_PAD_EIM_D20__GPIO_2_4 IOMUX_PAD(0x400, 0x06c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D21__GPIO_2_5 IOMUX_PAD(0x404, 0x070, 1, 0x0, 0, MX51_PAD_CTRL_10 | MX51_PAD_CTRL_13) +#define MX51_PAD_EIM_D22__GPIO_2_6 IOMUX_PAD(0x408, 0x074, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D23__GPIO_2_7 IOMUX_PAD(0x40c, 0x078, 1, 0x0, 0, MX51_PAD_CTRL_7) + +/* UART3 */ +#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, IOMUX_CONFIG_ALT3, 0x9f4, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, IOMUX_CONFIG_ALT3, 0x9f0, 0, MX51_UART3_PAD_CTRL) + +#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x09c, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_EIM_A16__GPIO_2_10 IOMUX_PAD(0x430, 0x09c, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A17__GPIO_2_11 IOMUX_PAD(0x434, 0x0a0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A18__GPIO_2_12 IOMUX_PAD(0x438, 0x0a4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A19__GPIO_2_13 IOMUX_PAD(0x43c, 0x0a8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A20__GPIO_2_14 IOMUX_PAD(0x440, 0x0ac, 1, 0x0, 0, PAD_CTL_PKE) +#define MX51_PAD_EIM_A21__GPIO_2_15 IOMUX_PAD(0x444, 0x0b0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A22__GPIO_2_16 IOMUX_PAD(0x448, 0x0b4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A23__GPIO_2_17 IOMUX_PAD(0x44c, 0x0b8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A24__GPIO_2_18 IOMUX_PAD(0x450, 0x0bc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A25__GPIO_2_19 IOMUX_PAD(0x454, 0x0c0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A26__GPIO_2_20 IOMUX_PAD(0x458, 0x0c4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_A27__GPIO_2_21 IOMUX_PAD(0x45c, 0x0c8, 1, 0x0, 0, MX51_PAD_CTRL_10) +#define MX51_PAD_EIM_EB2__GPIO_2_22 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB3__GPIO_2_23 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_EIM_OE__GPIO_2_24 IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS0__GPIO_2_25 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS1__GPIO_2_26 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS2__GPIO_2_27 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS3__GPIO_2_28 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS4__GPIO_2_29 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS5__GPIO_2_30 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_DTACK__GPIO_2_31 IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, MX51_PAD_CTRL_3) + +#define MX51_PAD_EIM_LBA__GPIO_3_1 IOMUX_PAD(0x494, 0xFC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CRE__GPIO_3_2 IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_WE_B__GPIO_3_3 IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RE_B__GPIO_3_4 IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_ALE__GPIO_3_5 IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CLE__GPIO_3_6 IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_WP_B__GPIO_3_7 IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB0__GPIO_3_8 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB1__GPIO_3_9 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB2__GPIO_3_10 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB3__GPIO_3_11 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_NAND__GPIO_3_12 IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_GPIO_NAND__PATA_INTRQ IOMUX_PAD(0x514, 0x12C, 1, 0x0, 0, MX51_PAD_CTRL_2) + +#define MX51_PAD_NANDF_RB5__GPIO_3_13 IOMUX_PAD(0x5D8, 0x130, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS0__GPIO_3_16 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) +#define MX51_PAD_NANDF_CS1__GPIO_3_17 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS2__GPIO_3_18 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS3__GPIO_3_19 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS4__GPIO_3_20 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS5__GPIO_3_21 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS6__GPIO_3_22 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS7__GPIO_3_23 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RDY_INT__GPIO_3_24 IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL) + +/* FEC */ +#define MX51_PAD_EIM_EB2__FEC_MDIO IOMUX_PAD(0x468, 0x0d4, 3, 0x0, 0, MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP) +#define MX51_PAD_EIM_EB3__FEC_RDAT1 IOMUX_PAD(0x46c, 0x0d8, 3, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_EIM_CS2__FEC_RDAT2 IOMUX_PAD(0x47c, 0x0e8, 3, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_EIM_CS3__FEC_RDAT3 IOMUX_PAD(0x480, 0x0ec, 3, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0x0f0, 3, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0x0f4, 3, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_NANDF_RB3__FEC_RXCLK IOMUX_PAD(0x504, 0x128, 1, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_NANDF_RB7__FEC_TDAT0 IOMUX_PAD(0x5E0, 0x138, 1, 0x0, 0, MX51_PAD_CTRL_5) +#define MX51_PAD_NANDF_RB6__FEC_RDAT0 IOMUX_PAD(0x5DC, 0x134, 1, 0x0, 0, MX51_PAD_CTRL_4) +#define MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, 0x0, 0, MX51_PAD_CTRL_5) +#define MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13C, 2, 0x0, 0, MX51_PAD_CTRL_5) +#define MX51_PAD_NANDF_CS4__FEC_TDAT1 IOMUX_PAD(0x528, 0x140, 2, 0x0, 0, MX51_PAD_CTRL_5) +#define MX51_PAD_NANDF_CS5__FEC_TDAT2 IOMUX_PAD(0x52C, 0x144, 2, 0x0, 0, MX51_PAD_CTRL_5) +#define MX51_PAD_NANDF_CS6__FEC_TDAT3 IOMUX_PAD(0x530, 0x148, 2, 0x0, 0, MX51_PAD_CTRL_5) +#define MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14C, 1, 0x0, 0, MX51_PAD_CTRL_5) +#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x0, 0, MX51_PAD_CTRL_4) + +#define MX51_PAD_NANDF_D15__GPIO_3_25 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D14__GPIO_3_26 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) +#define MX51_PAD_NANDF_D13__GPIO_3_27 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D12__GPIO_3_28 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D11__GPIO_3_29 IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D10__GPIO_3_30 IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D9__GPIO_3_31 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D8__GPIO_4_0 IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D7__GPIO_4_1 IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D6__GPIO_4_2 IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D5__GPIO_4_3 IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D4__GPIO_4_4 IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D3__GPIO_4_5 IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D2__GPIO_4_6 IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D1__GPIO_4_7 IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D0__GPIO_4_8 IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D8__GPIO_3_12 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D9__GPIO_3_13 IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, PAD_CTL_SRE_SLOW) +#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, PAD_CTL_SRE_SLOW) +#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5B4, 0x0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5B8, 0x0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI1_PKE0__CSI1_PKE0 IOMUX_PAD(0x860, 0x0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D12__GPIO_4_9 IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, MX51_PAD_CTRL_7) +#define MX51_PAD_CSI2_D13__GPIO_4_10 IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, MX51_PAD_CTRL_7) +#define MX51_PAD_CSI2_D14__GPIO_4_11 IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D15__GPIO_4_12 IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D16__GPIO_4_11 IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D17__GPIO_4_12 IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D18__GPIO_4_11 IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_D19__GPIO_4_12 IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, MX51_PAD_CTRL_12) +#define MX51_PAD_CSI2_VSYNC__GPIO_4_13 IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSI2_HSYNC__GPIO_4_14 IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_CSI2_PIXCLK__GPIO_4_15 IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_I2C1_CLK__GPIO_4_16 IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_I2C1_DAT__GPIO_4_17 IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_CSI2_PKE0__CSI2_PKE0 IOMUX_PAD(0x81C, 0x0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_I2C1_CLK__HSI2C_CLK IOMUX_PAD(0x5E8, 0x1F8, \ + IOMUX_CONFIG_SION, 0x0, 0, \ + MX51_PAD_CTRL_8) +#define MX51_PAD_I2C1_DAT__HSI2C_DAT IOMUX_PAD(0x5EC, 0x1FC, \ + IOMUX_CONFIG_SION, \ + 0x0, 0, MX51_PAD_CTRL_8) + +/* Audio */ +#define MX51_PAD_AUD3_BB_TXD__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, 0, 0x0, 0, MX51_PAD_CTRL_10) +#define MX51_PAD_AUD3_BB_RXD__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, 0, 0x0, 0, MX51_PAD_CTRL_10) +#define MX51_PAD_AUD3_BB_CK__AUD3_BB_CK IOMUX_PAD(0x5F8, 0x208, 0, 0x0, 0, MX51_PAD_CTRL_10) +#define MX51_PAD_AUD3_BB_FS__AUD3_BB_FS IOMUX_PAD(0x5FC, 0x20C, 0, 0x0, 0, MX51_PAD_CTRL_10) + +/* CSPI */ +#define MX51_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, 0x0, 0, MX51_PAD_CTRL_11) +#define MX51_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x60C, 0x21C, 0, 0x0, 0, MX51_PAD_CTRL_11) + +#define MX51_PAD_AUD3_BB_TXD__GPIO_4_18 IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_RXD__GPIO_4_19 IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_CK__GPIO_4_20 IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_FS__GPIO_4_21 IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_MOSI__GPIO_4_22 IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_MISO__GPIO_4_23 IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_SS0__GPIO_4_24 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_RDY__GPIO_4_26 IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, MX51_PAD_CTRL_10 | MX51_PAD_CTRL_13) +#define MX51_PAD_CSPI1_SCLK__GPIO_4_27 IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL) + +/* UART1 */ +#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, IOMUX_CONFIG_ALT0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) +#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) +#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, IOMUX_CONFIG_ALT0, 0x9e0, 0, MX51_UART1_PAD_CTRL) +#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL) + +/* UART2 */ +#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, IOMUX_CONFIG_ALT0, 0x9ec, 2, MX51_UART2_PAD_CTRL) +#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62C, 0x23C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART2_PAD_CTRL) + +#define MX51_PAD_UART3_RXD__GPIO_1_22 IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, MX51_PAD_CTRL_1) +#define MX51_PAD_UART3_TXD__GPIO_1_23 IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_OWIRE_LINE__GPIO_1_24 IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_OWIRE_LINE__SPDIF_OUT1 IOMUX_PAD(0x638, 0x248, 6, 0x0, 0, MX51_PAD_CTRL_10 | MX51_PAD_CTRL_13) +#define MX51_PAD_OWIRE_LINE__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 0, 0x0, 0, MX51_I2C_PAD_CTRL | MX51_PAD_CTRL_13) +#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL) + +/* I2C2 */ +#define MX51_PAD_KEY_COL4__I2C2_SCL IOMUX_PAD(0x65C, 0x26C, IOMUX_CONFIG_ALT3 | IOMUX_CONFIG_SION, \ + 0x09b8, 1, MX51_I2C_PAD_CTRL) +#define MX51_PAD_KEY_COL5__I2C2_SDA IOMUX_PAD(0x660, 0x270, IOMUX_CONFIG_ALT3 | IOMUX_CONFIG_SION, \ + 0x9bc, 1, MX51_I2C_PAD_CTRL) + +#define MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67C, 0x27C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_STP__GPIO_1_27 IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_GPIO, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68C, 0x28C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69C, 0x29C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL) +#define MX51_PAD_DI1_PIN11__GPIO_3_0 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN12__GPIO_3_1 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_DI1_PIN13__GPIO_3_2 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_D0_CS__GPIO_3_3 IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, MX51_PAD_CTRL_7) +#define MX51_PAD_DI1_D1_CS__GPIO_3_4 IOMUX_PAD(0x6B8, 0x2B8, 4, 0x984, 1, MX51_PAD_CTRL_7) +#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5 IOMUX_PAD(0x6BC, 0x2BC, 4, 0x988, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6 IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7 IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8 IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_DISP1_DAT22__DISP2_DAT16 IOMUX_PAD(0x724, 0x324, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP1_DAT23__DISP2_DAT17 IOMUX_PAD(0x728, 0x328, 5, 0x0, 0, NO_PAD_CTRL) + +#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP1__DI_GP1 IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP2__DI_GP2 IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP3__CSI1_DATA_EN IOMUX_PAD(0x744, 0x33C, 3, 0x9a0, 1, MX51_PAD_CTRL_7) +#define MX51_PAD_DI_GP3__DI_GP3 IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP4__DI_GP4 IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI_GP4__DI2_PIN15 IOMUX_PAD(0x758, 0x350, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT6__GPIO_1_19 IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT7__GPIO_1_29 IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT8__GPIO_1_30 IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT9__GPIO_1_31 IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL) + +/* SD1 */ +#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHC_PAD_CTRL) +#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHC_PAD_CTRL | PAD_CTL_HYS) +#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, MX51_SDHC_PAD_CTRL) +#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, MX51_SDHC_PAD_CTRL) +#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, MX51_SDHC_PAD_CTRL) +#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, MX51_SDHC_PAD_CTRL) + +/* SD2 */ +#define MX51_PAD_GPIO_1_0__GPIO_1_0 IOMUX_PAD(0x7B4, 0x3AC, 1 | IOMUX_CONFIG_SION, 0x0, 0, MX51_PAD_CTRL_9) +#define MX51_PAD_GPIO_1_1__GPIO_1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, MX51_PAD_CTRL_9) +#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHC_PAD_CTRL) +#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHC_PAD_CTRL | PAD_CTL_HYS) +#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHC_PAD_CTRL) +#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHC_PAD_CTRL) +#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHC_PAD_CTRL) +#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, IOMUX_CONFIG_SION, 0x0, 0, MX51_SDHC_PAD_CTRL) + +#define MX51_PAD_GPIO_1_2__PWM_PWMO IOMUX_PAD(0x7D4, 0x3CC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_3__I2C2_SDA IOMUX_PAD(0x7D8, 0x3D0, 2 | IOMUX_CONFIG_SION, 0x9bc, 3, MX51_I2C_PAD_CTRL) +#define MX51_PAD_GPIO_1_2__GPIO_1_2 IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_3__GPIO_1_3 IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, MX51_UART3_PAD_CTRL) +#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_GPIO_1_4__GPIO_1_4 IOMUX_PAD(0x804, 0x3D8, IOMUX_CONFIG_SION, 0x0, 0, MX51_PAD_CTRL_9) +#define MX51_PAD_GPIO_1_5__GPIO_1_5 IOMUX_PAD(0x808, 0x3DC, IOMUX_CONFIG_SION, 0x0, 0, MX51_PAD_CTRL_9) +#define MX51_PAD_GPIO_1_6__GPIO_1_6 IOMUX_PAD(0x80C, 0x3E0, IOMUX_CONFIG_SION, 0x0, 0, MX51_PAD_CTRL_9) +#define MX51_PAD_GPIO_1_7__GPIO_1_7 IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, MX51_GPIO_PAD_CTRL) +#define MX51_PAD_GPIO_1_8__GPIO_1_8 IOMUX_PAD(0x814, 0x3E8, IOMUX_CONFIG_SION, 0x0 , 1, MX51_PAD_CTRL_6) +#define MX51_PAD_GPIO_1_9__GPIO_1_9 IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL) + +#endif /* __MACH_IOMUX_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h new file mode 100644 index 000000000000..ed2460a40815 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h @@ -0,0 +1,579 @@ +/* + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MACH_IOMUX_MX53_H__ +#define __MACH_IOMUX_MX53_H__ + +#include <mach/iomux-v3.h> + +/* + * various IOMUX alternate output functions (1-7) + */ +typedef enum iomux_config { + IOMUX_CONFIG_ALT0, + IOMUX_CONFIG_ALT1, + IOMUX_CONFIG_ALT2, + IOMUX_CONFIG_ALT3, + IOMUX_CONFIG_ALT4, + IOMUX_CONFIG_ALT5, + IOMUX_CONFIG_ALT6, + IOMUX_CONFIG_ALT7, + IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */ + IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */ +} iomux_pin_cfg_t; + +#define IOMUX_TO_IRQ_V3(pin) (MXC_GPIO_IRQ_START + pin) + +#define NON_MUX_I 0x3FF +#define NON_PAD_I 0x7FF + +#define MX53_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define MX53_SDHC_PAD_CTRL (PAD_CTL_DVS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) +#define MX53_FEC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_22K_UP | PAD_CTL_ODE | PAD_CTL_DSE_HIGH) +#define MX53_ESAI_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_HYS | PAD_CTL_PKE |\ + PAD_CTL_PUE | PAD_CTL_PUS_100K_UP) +#define PAD_CTRL_1 (PAD_CTL_HYS | PAD_CTL_DSE_HIGH) +#define PAD_CTRL_2 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH) +#define PAD_CTRL_3 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_HYS) +#define PAD_CTRL_4 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_HYS | PAD_CTL_PUS_100K_UP) +#define PAD_CTRL_5 (PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST) + +#define PAD_CTRL_6 (PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW) +#define PAD_CTRL_7 (PAD_CTL_DSE_HIGH | PAD_CTL_SRE_SLOW) +#define PAD_CTRL_8 (PAD_CTL_HYS | PAD_CTL_PKE) + +#define PAD_CTRL_9 (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_HYS) + +#define PAD_CTRL_10 (PAD_CTL_PKE | PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_HIGH) + +#define PAD_CTRL_11 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP) + +#define PAD_CTRL_12 (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | PAD_CTL_SRE_FAST) + + +#define MX53_PAD_GPIO_19__GPIO_4_5 IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_COL0__GPIO_4_6 IOMUX_PAD(0x34C, 0x24, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_ROW0__GPIO_4_7 IOMUX_PAD(0x350, 0x28, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_COL1__GPIO_4_8 IOMUX_PAD(0x354, 0x2C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_ROW1__GPIO_4_9 IOMUX_PAD(0x358, 0x30, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_COL2__GPIO_4_10 IOMUX_PAD(0x35C, 0x34, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_ROW2__GPIO_4_11 IOMUX_PAD(0x360, 0x38, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_COL3__GPIO_4_12 IOMUX_PAD(0x364, 0x3C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_ROW3__GPIO_4_13 IOMUX_PAD(0x368, 0x40, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_COL4__GPIO_4_14 IOMUX_PAD(0x36C, 0x44, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_ROW4__GPIO_4_15 IOMUX_PAD(0x370, 0x48, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_KEYPAD__NVCC_KEYPAD IOMUX_PAD(0x374, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DI0_DISP_CLK__GPIO_4_16 IOMUX_PAD(0x378, 0x4C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DI0_PIN15__GPIO_4_17 IOMUX_PAD(0x37C, 0x50, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DI0_PIN2__GPIO_4_18 IOMUX_PAD(0x380, 0x54, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DI0_PIN3__GPIO_4_19 IOMUX_PAD(0x384, 0x58, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DI0_PIN4__GPIO_4_20 IOMUX_PAD(0x388, 0x5C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT0__GPIO_4_21 IOMUX_PAD(0x38C, 0x60, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT1__GPIO_4_22 IOMUX_PAD(0x390, 0x64, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT2__GPIO_4_23 IOMUX_PAD(0x394, 0x68, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT3__GPIO_4_24 IOMUX_PAD(0x398, 0x6C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT4__GPIO_4_25 IOMUX_PAD(0x39C, 0x70, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT5__GPIO_4_26 IOMUX_PAD(0x3A0, 0x74, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT6__GPIO_4_27 IOMUX_PAD(0x3A4, 0x78, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT7__GPIO_4_28 IOMUX_PAD(0x3A8, 0x7C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT8__GPIO_4_29 IOMUX_PAD(0x3AC, 0x80, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT9__GPIO_4_30 IOMUX_PAD(0x3B0, 0x84, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT10__GPIO_4_31 IOMUX_PAD(0x3B4, 0x88, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT11__GPIO_5_5 IOMUX_PAD(0x3B8, 0x8C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT12__GPIO_5_6 IOMUX_PAD(0x3BC, 0x90, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT13__GPIO_5_7 IOMUX_PAD(0x3C0, 0x94, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT14__GPIO_5_8 IOMUX_PAD(0x3C4, 0x98, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT15__GPIO_5_9 IOMUX_PAD(0x3C8, 0x9C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT16__GPIO_5_10 IOMUX_PAD(0x3CC, 0xA0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT17__GPIO_5_11 IOMUX_PAD(0x3D0, 0xA4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT18__GPIO_5_12 IOMUX_PAD(0x3D4, 0xA8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT19__GPIO_5_13 IOMUX_PAD(0x3D8, 0xAC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT20__GPIO_5_14 IOMUX_PAD(0x3DC, 0xB0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT21__GPIO_5_15 IOMUX_PAD(0x3E0, 0xB4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT22__GPIO_5_16 IOMUX_PAD(0x3E4, 0xB8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DISP0_DAT23__GPIO_5_17 IOMUX_PAD(0x3E8, 0xBC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_PIXCLK__GPIO_5_18 IOMUX_PAD(0x3EC, 0xC0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_MCLK__GPIO_5_19 IOMUX_PAD(0x3F0, 0xC4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_DATA_EN__GPIO_5_20 IOMUX_PAD(0x3F4, 0xC8, 1, 0x0, 0, PAD_CTRL_12) +#define MX53_PAD_CSI0_VSYNC__GPIO_5_21 IOMUX_PAD(0x3F8, 0xCC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D4__GPIO_5_22 IOMUX_PAD(0x3FC, 0xD0, 1, 0x0, 0, PAD_CTRL_4) +#define MX53_PAD_CSI0_D5__GPIO_5_23 IOMUX_PAD(0x400, 0xD4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D6__GPIO_5_24 IOMUX_PAD(0x404, 0xD8, 1, 0x0, 0, PAD_CTRL_4) +#define MX53_PAD_CSI0_D7__GPIO_5_25 IOMUX_PAD(0x408, 0xDC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D8__GPIO_5_26 IOMUX_PAD(0x40C, 0xE0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D9__GPIO_5_27 IOMUX_PAD(0x410, 0xE4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D10__GPIO_5_28 IOMUX_PAD(0x414, 0xE8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D11__GPIO_5_29 IOMUX_PAD(0x418, 0xEC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D12__GPIO_5_30 IOMUX_PAD(0x41C, 0xF0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D13__GPIO_5_31 IOMUX_PAD(0x420, 0xF4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D14__GPIO_6_0 IOMUX_PAD(0x424, 0xF8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D15__GPIO_6_1 IOMUX_PAD(0x428, 0xFC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D16__GPIO_6_2 IOMUX_PAD(0x42C, 0x100, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D17__GPIO_6_3 IOMUX_PAD(0x430, 0x104, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D18__GPIO_6_4 IOMUX_PAD(0x434, 0x108, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D19__GPIO_6_5 IOMUX_PAD(0x438, 0x10C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_CSI0__NVCC_CSI0 IOMUX_PAD(0x43C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_JTAG_TMS__JTAG_TMS IOMUX_PAD(0x440, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_JTAG_MOD__JTAG_MOD IOMUX_PAD(0x444, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_JTAG_TRSTB__JTAG_TRSTB IOMUX_PAD(0x448, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_JTAG_TDI__JTAG_TDI IOMUX_PAD(0x44C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_JTAG_TCK__JTAG_TCK IOMUX_PAD(0x450, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_JTAG_TDO__JTAG_TDO IOMUX_PAD(0x454, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A25__GPIO_5_2 IOMUX_PAD(0x458, 0x110, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_EB2__GPIO_2_30 IOMUX_PAD(0x45C, 0x114, 1, 0x0, 0, PAD_CTRL_4) +#define MX53_PAD_EIM_D16__GPIO_3_16 IOMUX_PAD(0x460, 0x118, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D17__GPIO_3_17 IOMUX_PAD(0x464, 0x11C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D18__GPIO_3_18 IOMUX_PAD(0x468, 0x120, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D19__GPIO_3_19 IOMUX_PAD(0x46C, 0x124, 1, 0x0, 0, PAD_CTRL_4) +#define MX53_PAD_EIM_D20__GPIO_3_20 IOMUX_PAD(0x470, 0x128, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D21__GPIO_3_21 IOMUX_PAD(0x474, 0x12C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D22__GPIO_3_22 IOMUX_PAD(0x478, 0x130, 1, 0x0, 0, PAD_CTRL_12) +#define MX53_PAD_EIM_D23__GPIO_3_23 IOMUX_PAD(0x47C, 0x134, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_EB3__GPIO_2_31 IOMUX_PAD(0x480, 0x138, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D24__GPIO_3_24 IOMUX_PAD(0x484, 0x13C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D25__GPIO_3_25 IOMUX_PAD(0x488, 0x140, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D26__GPIO_3_26 IOMUX_PAD(0x48C, 0x144, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D27__GPIO_3_27 IOMUX_PAD(0x490, 0x148, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D28__GPIO_3_28 IOMUX_PAD(0x494, 0x14C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D29__GPIO_3_29 IOMUX_PAD(0x498, 0x150, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D30__GPIO_3_30 IOMUX_PAD(0x49C, 0x154, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D31__GPIO_3_31 IOMUX_PAD(0x4A0, 0x158, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_EIM1__NVCC_EIM1 IOMUX_PAD(0x4A4, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A24__GPIO_5_4 IOMUX_PAD(0x4A8, 0x15C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A23__GPIO_6_6 IOMUX_PAD(0x4AC, 0x160, 1, 0x0, 0, PAD_CTRL_12) +#define MX53_PAD_EIM_A22__GPIO_2_16 IOMUX_PAD(0x4B0, 0x164, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A21__GPIO_2_17 IOMUX_PAD(0x4B4, 0x168, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A20__GPIO_2_18 IOMUX_PAD(0x4B8, 0x16C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A19__GPIO_2_19 IOMUX_PAD(0x4BC, 0x170, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A18__GPIO_2_20 IOMUX_PAD(0x4C0, 0x174, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A17__GPIO_2_21 IOMUX_PAD(0x4C4, 0x178, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A16__GPIO_2_22 IOMUX_PAD(0x4C8, 0x17C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_CS0__GPIO_2_23 IOMUX_PAD(0x4CC, 0x180, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_CS1__GPIO_2_24 IOMUX_PAD(0x4D0, 0x184, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_OE__GPIO_2_25 IOMUX_PAD(0x4D4, 0x188, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_RW__GPIO_2_26 IOMUX_PAD(0x4D8, 0x18C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_LBA__GPIO_2_27 IOMUX_PAD(0x4DC, 0x190, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_EIM4__NVCC_EIM4 IOMUX_PAD(0x4E0, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_EB0__GPIO_2_28 IOMUX_PAD(0x4E4, 0x194, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_EB1__GPIO_2_29 IOMUX_PAD(0x4E8, 0x198, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA0__GPIO_3_0 IOMUX_PAD(0x4EC, 0x19C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA1__GPIO_3_1 IOMUX_PAD(0x4F0, 0x1A0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA2__GPIO_3_2 IOMUX_PAD(0x4F4, 0x1A4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA3__GPIO_3_3 IOMUX_PAD(0x4F8, 0x1A8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA4__GPIO_3_4 IOMUX_PAD(0x4FC, 0x1AC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA5__GPIO_3_5 IOMUX_PAD(0x500, 0x1B0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA6__GPIO_3_6 IOMUX_PAD(0x504, 0x1B4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA7__GPIO_3_7 IOMUX_PAD(0x508, 0x1B8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA8__GPIO_3_8 IOMUX_PAD(0x50C, 0x1BC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA9__GPIO_3_9 IOMUX_PAD(0x510, 0x1C0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA10__GPIO_3_10 IOMUX_PAD(0x514, 0x1C4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA11__GPIO_3_11 IOMUX_PAD(0x518, 0x1C8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA12__GPIO_3_12 IOMUX_PAD(0x51C, 0x1CC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA13__GPIO_3_13 IOMUX_PAD(0x520, 0x1D0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA14__GPIO_3_14 IOMUX_PAD(0x524, 0x1D4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_DA15__GPIO_3_15 IOMUX_PAD(0x528, 0x1D8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_WE_B__GPIO_6_12 IOMUX_PAD(0x52C, 0x1DC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_RE_B__GPIO_6_13 IOMUX_PAD(0x530, 0x1E0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_WAIT__GPIO_5_0 IOMUX_PAD(0x534, 0x1E4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_BCLK__EIM_BCLK IOMUX_PAD(0x538, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_EIM7__NVCC_EIM7 IOMUX_PAD(0x53C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS1_TX3_P__GPIO_6_22 IOMUX_PAD(NON_PAD_I, 0x1EC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS1_TX2_P__GPIO_6_24 IOMUX_PAD(NON_PAD_I, 0x1F0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS1_CLK_P__GPIO_6_26 IOMUX_PAD(NON_PAD_I, 0x1F4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS1_TX1_P__GPIO_6_28 IOMUX_PAD(NON_PAD_I, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS1_TX0_P__GPIO_6_30 IOMUX_PAD(NON_PAD_I, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS0_TX3_P__GPIO_7_22 IOMUX_PAD(NON_PAD_I, 0x200, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS0_CLK_P__GPIO_7_24 IOMUX_PAD(NON_PAD_I, 0x204, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS0_TX2_P__GPIO_7_26 IOMUX_PAD(NON_PAD_I, 0x208, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS0_TX1_P__GPIO_7_28 IOMUX_PAD(NON_PAD_I, 0x20C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS0_TX0_P__GPIO_7_30 IOMUX_PAD(NON_PAD_I, 0x210, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_10__GPIO_4_0 IOMUX_PAD(0x540, 0x214, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_11__GPIO_4_1 IOMUX_PAD(0x544, 0x218, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_12__GPIO_4_2 IOMUX_PAD(0x548, 0x21C, 0, 0x0, 0, \ + PAD_CTRL_9 | PAD_CTRL_2) +#define MX53_PAD_GPIO_13__GPIO_4_3 IOMUX_PAD(0x54C, 0x220, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_14__GPIO_4_4 IOMUX_PAD(0x550, 0x224, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_DQM3__DRAM_DQM3 IOMUX_PAD(0x554, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDQS3__DRAM_SDQS3 IOMUX_PAD(0x558, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDCKE1__DRAM_SDCKE1 IOMUX_PAD(0x55C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_DQM2__DRAM_DQM2 IOMUX_PAD(0x560, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDODT1__DRAM_SDODT1 IOMUX_PAD(0x564, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDQS2__DRAM_SDQS2 IOMUX_PAD(0x568, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_RESET__DRAM_RESET IOMUX_PAD(0x56C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDCLK1__DRAM_SDCLK1 IOMUX_PAD(0x570, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_CAS__DRAM_CAS IOMUX_PAD(0x574, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDCLK0__DRAM_SDCLK0 IOMUX_PAD(0x578, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDQS0__DRAM_SDQS0 IOMUX_PAD(0x57C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDODT0__DRAM_SDODT0 IOMUX_PAD(0x580, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_DQM0__DRAM_DQM0 IOMUX_PAD(0x584, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_RAS__DRAM_RAS IOMUX_PAD(0x588, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDCKE0__DRAM_SDCKE0 IOMUX_PAD(0x58C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_SDQS1__DRAM_SDQS1 IOMUX_PAD(0x590, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_DRAM_DQM1__DRAM_DQM1 IOMUX_PAD(0x594, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_PMIC_ON_REQ__PMIC_ON_REQ IOMUX_PAD(0x598, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ IOMUX_PAD(0x59C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_CLE__GPIO_6_7 IOMUX_PAD(0x5A0, 0x228, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_ALE__GPIO_6_8 IOMUX_PAD(0x5A4, 0x22C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_WP_B__GPIO_6_9 IOMUX_PAD(0x5A8, 0x230, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_RB0__GPIO_6_10 IOMUX_PAD(0x5AC, 0x234, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_CS0__GPIO_6_11 IOMUX_PAD(0x5B0, 0x238, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_CS1__GPIO_6_14 IOMUX_PAD(0x5B4, 0x23C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_CS2__GPIO_6_15 IOMUX_PAD(0x5B8, 0x240, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NANDF_CS3__GPIO_6_16 IOMUX_PAD(0x5BC, 0x244, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_NANDF__NVCC_NANDF IOMUX_PAD(0x5C0, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_MDIO__GPIO_1_22 IOMUX_PAD(0x5C4, 0x248, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_REF_CLK__GPIO_1_23 IOMUX_PAD(0x5C8, 0x24C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_RX_ER__GPIO_1_24 IOMUX_PAD(0x5CC, 0x250, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_CRS_DV__GPIO_1_25 IOMUX_PAD(0x5D0, 0x254, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_RXD1__GPIO_1_26 IOMUX_PAD(0x5D4, 0x258, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_RXD0__GPIO_1_27 IOMUX_PAD(0x5D8, 0x25C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_TX_EN__GPIO_1_28 IOMUX_PAD(0x5DC, 0x260, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_TXD1__GPIO_1_29 IOMUX_PAD(0x5E0, 0x264, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_TXD0__GPIO_1_30 IOMUX_PAD(0x5E4, 0x268, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_FEC_MDC__GPIO_1_31 IOMUX_PAD(0x5E8, 0x26C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_FEC__NVCC_FEC IOMUX_PAD(0x5EC, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DIOW__GPIO_6_17 IOMUX_PAD(0x5F0, 0x270, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DMACK__GPIO_6_18 IOMUX_PAD(0x5F4, 0x274, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DMARQ__GPIO_7_0 IOMUX_PAD(0x5F8, 0x278, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_BUFFER_EN__GPIO_7_1 IOMUX_PAD(0x5FC, 0x27C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_INTRQ__GPIO_7_2 IOMUX_PAD(0x600, 0x280, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DIOR__GPIO_7_3 IOMUX_PAD(0x604, 0x284, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_RESET_B__GPIO_7_4 IOMUX_PAD(0x608, 0x288, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_IORDY__GPIO_7_5 IOMUX_PAD(0x60C, 0x28C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DA_0__GPIO_7_6 IOMUX_PAD(0x610, 0x290, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DA_1__GPIO_7_7 IOMUX_PAD(0x614, 0x294, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DA_2__GPIO_7_8 IOMUX_PAD(0x618, 0x298, 1, 0x0, 0, PAD_CTRL_12) +#define MX53_PAD_ATA_CS_0__GPIO_7_9 IOMUX_PAD(0x61C, 0x29C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_CS_1__GPIO_7_10 IOMUX_PAD(0x620, 0x2A0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_ATA2__NVCC_ATA2 IOMUX_PAD(0x624, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA0__GPIO_2_0 IOMUX_PAD(0x628, 0x2A4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA1__GPIO_2_1 IOMUX_PAD(0x62C, 0x2A8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA2__GPIO_2_2 IOMUX_PAD(0x630, 0x2AC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA3__GPIO_2_3 IOMUX_PAD(0x634, 0x2B0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA4__GPIO_2_4 IOMUX_PAD(0x638, 0x2B4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA5__GPIO_2_5 IOMUX_PAD(0x63C, 0x2B8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP) +#define MX53_PAD_ATA_DATA6__GPIO_2_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA7__GPIO_2_7 IOMUX_PAD(0x644, 0x2C0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA8__GPIO_2_8 IOMUX_PAD(0x648, 0x2C4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA9__GPIO_2_9 IOMUX_PAD(0x64C, 0x2C8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA10__GPIO_2_10 IOMUX_PAD(0x650, 0x2CC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA11__GPIO_2_11 IOMUX_PAD(0x654, 0x2D0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA12__GPIO_2_12 IOMUX_PAD(0x658, 0x2D4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA13__GPIO_2_13 IOMUX_PAD(0x65C, 0x2D8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA14__GPIO_2_14 IOMUX_PAD(0x660, 0x2DC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA15__GPIO_2_15 IOMUX_PAD(0x664, 0x2E0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_ATA0__NVCC_ATA0 IOMUX_PAD(0x668, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD1_DATA0__GPIO_1_16 IOMUX_PAD(0x66C, 0x2E4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD1_DATA1__GPIO_1_17 IOMUX_PAD(0x670, 0x2E8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD1_CMD__GPIO_1_18 IOMUX_PAD(0x674, 0x2EC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD1_DATA2__GPIO_1_19 IOMUX_PAD(0x678, 0x2F0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD1_CLK__GPIO_1_20 IOMUX_PAD(0x67C, 0x2F4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD1_DATA3__GPIO_1_21 IOMUX_PAD(0x680, 0x2F8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_SD1__NVCC_SD1 IOMUX_PAD(0x684, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_CLK__GPIO_1_10 IOMUX_PAD(0x688, 0x2FC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_CMD__GPIO_1_11 IOMUX_PAD(0x68C, 0x300, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_DATA3__GPIO_1_12 IOMUX_PAD(0x690, 0x304, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_DATA2__GPIO_1_13 IOMUX_PAD(0x694, 0x308, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_DATA1__GPIO_1_14 IOMUX_PAD(0x698, 0x30C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_DATA0__GPIO_1_15 IOMUX_PAD(0x69C, 0x310, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_SD2__NVCC_SD2 IOMUX_PAD(0x6A0, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_0__GPIO_1_0 IOMUX_PAD(0x6A4, 0x314, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_1__GPIO_1_1 IOMUX_PAD(0x6A8, 0x318, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_9__GPIO_1_9 IOMUX_PAD(0x6AC, 0x31C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_3__GPIO_1_3 IOMUX_PAD(0x6B0, 0x320, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_6__GPIO_1_6 IOMUX_PAD(0x6B4, 0x324, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_2__GPIO_1_2 IOMUX_PAD(0x6B8, 0x328, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_4__GPIO_1_4 IOMUX_PAD(0x6BC, 0x32C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_5__GPIO_1_5 IOMUX_PAD(0x6C0, 0x330, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_7__GPIO_1_7 IOMUX_PAD(0x6C4, 0x334, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_8__GPIO_1_8 IOMUX_PAD(0x6C8, 0x338, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_16__GPIO_7_11 IOMUX_PAD(0x6CC, 0x33C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_17__GPIO_7_12 IOMUX_PAD(0x6D0, 0x340, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GPIO_18__GPIO_7_13 IOMUX_PAD(0x6D4, 0x344, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_NVCC_GPIO__NVCC_GPIO IOMUX_PAD(0x6D8, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_POR_B__POR_B IOMUX_PAD(0x6DC, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_BOOT_MODE1__BOOT_MODE1 IOMUX_PAD(0x6E0, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_RESET_IN_B__RESET_IN_B IOMUX_PAD(0x6E4, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_BOOT_MODE0__BOOT_MODE0 IOMUX_PAD(0x6E8, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_TEST_MODE__TEST_MODE IOMUX_PAD(0x6EC, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_ADDDS__GRP_ADDDS IOMUX_PAD(0x6F0, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_DDRMODE_CTL__GRP_DDRMODE_CTL IOMUX_PAD(0x6F4, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_DDRPKE__GRP_DDRPKE IOMUX_PAD(0x6FC, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_DDRPK__GRP_DDRPK IOMUX_PAD(0x708, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_TERM_CTL3__GRP_TERM_CTL3 IOMUX_PAD(0x70C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_DDRHYS__GRP_DDRHYS IOMUX_PAD(0x710, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_DDRMODE__GRP_DDRMODE IOMUX_PAD(0x714, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_B0DS__GRP_B0DS IOMUX_PAD(0x718, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_B1DS__GRP_B1DS IOMUX_PAD(0x71C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_CTLDS__GRP_CTLDS IOMUX_PAD(0x720, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_DDR_TYPE__GRP_DDR_TYPE IOMUX_PAD(0x724, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_B2DS__GRP_B2DS IOMUX_PAD(0x728, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_GRP_B3DS__GRP_B3DS IOMUX_PAD(0x72C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL) + +/* NAND */ +#define MX53_PAD_NANDF_CLE__NANDF_CLE IOMUX_PAD(0x5A0, 0x228, 0, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX53_PAD_NANDF_ALE__NANDF_ALE IOMUX_PAD(0x5A4, 0x22C, 0, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX53_PAD_NANDF_WP_B__NANDF_WP_B IOMUX_PAD(0x5A8, 0x230, 0, 0x0, 0, PAD_CTRL_11) +#define MX53_PAD_NANDF_WE_B__NANDF_WE_B IOMUX_PAD(0x52C, 0x1DC, 0, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX53_PAD_NANDF_RE_B__NANDF_RE_B IOMUX_PAD(0x530, 0x1E0, 0, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX53_PAD_NANDF_RB0__NANDF_RB0 IOMUX_PAD(0x5AC, 0x234, 0, 0x0, 0, PAD_CTRL_11) +#define MX53_PAD_NANDF_CS0__NANDF_CS0 IOMUX_PAD(0x5B0, 0x238, 0, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX53_PAD_NANDF_CS1__NANDF_CS1 IOMUX_PAD(0x5B4, 0x23C, 0, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX53_PAD_NANDF_CS2__NANDF_CS2 IOMUX_PAD(0x5B8, 0x240, 0, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX53_PAD_NANDF_CS3__NANDF_CS3 IOMUX_PAD(0x5BC, 0x244, 0, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX53_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x4EC, 0x19C, 0, 0x0, 0, PAD_CTRL_10) +#define MX53_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x4F0, 0x1A0, 0, 0x0, 0, PAD_CTRL_10) +#define MX53_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x4F4, 0x1A4, 0, 0x0, 0, PAD_CTRL_10) +#define MX53_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x4F8, 0x1A8, 0, 0x0, 0, PAD_CTRL_10) +#define MX53_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x4FC, 0x1AC, 0, 0x0, 0, PAD_CTRL_10) +#define MX53_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x500, 0x1B0, 0, 0x0, 0, PAD_CTRL_10) +#define MX53_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x504, 0x1B4, 0, 0x0, 0, PAD_CTRL_10) +#define MX53_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x508, 0x1B8, 0, 0x0, 0, PAD_CTRL_10) + +/* SPI */ +#define MX53_PAD_EIM_EB2__CSPI_SS0 IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, PAD_CTRL_1) +#define MX53_PAD_EIM_D19__CSPI_SS1 IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 3, PAD_CTRL_1) + +/* PWM */ +#define MX53_PAD_GPIO_1__PWMO IOMUX_PAD(0x6A8, 0x318, 4, 0x0, 0, NO_PAD_CTRL) + +/* Camera */ +#define MX53_PAD_CSI0_VSYNC__CSI0_VSYNC IOMUX_PAD(0x3F8, 0xCC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_PIXCLK__CSI0_PIXCLK IOMUX_PAD(0x3EC, 0xC0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_MCLK__CSI0_HSYNC IOMUX_PAD(0x3F0, 0xC4, 0, 0x0, 0, NO_PAD_CTRL) + +/* IPU */ +#define MX53_PAD_CSI0_D12__CSI0_D12 IOMUX_PAD(0x41C, 0xF0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D13__CSI0_D13 IOMUX_PAD(0x420, 0xF4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D14__CSI0_D14 IOMUX_PAD(0x424, 0xF8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D15__CSI0_D15 IOMUX_PAD(0x428, 0xFC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D16__CSI0_D16 IOMUX_PAD(0x42C, 0x100, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D17__CSI0_D17 IOMUX_PAD(0x430, 0x104, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D18__CSI0_D18 IOMUX_PAD(0x434, 0x108, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_CSI0_D19__CSI0_D19 IOMUX_PAD(0x438, 0x10C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D20__SER_DISP0_CS IOMUX_PAD(0x470, 0x128, 3, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D29__DISPB0_SER_RS IOMUX_PAD(0x498, 0x150, 3, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D30__DI0_PIN11 IOMUX_PAD(0x49C, 0x154, 4, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D31__DI0_PIN12 IOMUX_PAD(0x4A0, 0x158, 4, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D23__DI0_D0_CS IOMUX_PAD(0x47C, 0x134, 4, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_A25__DI0_D1_CS IOMUX_PAD(0x458, 0x110, 6, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_OE__DI1_PIN7 IOMUX_PAD(0x4D4, 0x188, 3, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_RW__DI1_PIN8 IOMUX_PAD(0x4D8, 0x18C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D21__DISPB0_SER_CLK IOMUX_PAD(0x474, 0x12C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_EIM_D22__DISPB0_SER_DIN IOMUX_PAD(0x478, 0x130, 3, 0x0, 0, NO_PAD_CTRL) + +/* Display */ +#define MX53_PAD_DI0_DISP_CLK__DI0_DISP_CLK IOMUX_PAD(0x378, 0x4C, 0, 0x0, 0, PAD_CTRL_5) +#define MX53_PAD_DI0_PIN15__DI0_PIN15 IOMUX_PAD(0x37C, 0x50, 0, 0x0, 0, PAD_CTRL_5) +#define MX53_PAD_DI0_PIN2__DI0_PIN2 IOMUX_PAD(0x380, 0x54, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DI0_PIN3__DI0_PIN3 IOMUX_PAD(0x384, 0x58, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT0__DISP0_DAT0 IOMUX_PAD(0x38C, 0x60, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT1__DISP0_DAT1 IOMUX_PAD(0x390, 0x64, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT2__DISP0_DAT2 IOMUX_PAD(0x394, 0x68, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT3__DISP0_DAT3 IOMUX_PAD(0x398, 0x6C, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT4__DISP0_DAT4 IOMUX_PAD(0x39C, 0x70, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT5__DISP0_DAT5 IOMUX_PAD(0x3A0, 0x74, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT6__DISP0_DAT6 IOMUX_PAD(0x3A4, 0x78, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT7__DISP0_DAT7 IOMUX_PAD(0x3A8, 0x7C, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT8__DISP0_DAT8 IOMUX_PAD(0x3AC, 0x80, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT9__DISP0_DAT9 IOMUX_PAD(0x3B0, 0x84, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT10__DISP0_DAT10 IOMUX_PAD(0x3B4, 0x88, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT11__DISP0_DAT11 IOMUX_PAD(0x3B8, 0x8C, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT12__DISP0_DAT12 IOMUX_PAD(0x3BC, 0x90, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT13__DISP0_DAT13 IOMUX_PAD(0x3C0, 0x94, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT14__DISP0_DAT14 IOMUX_PAD(0x3C4, 0x98, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT15__DISP0_DAT15 IOMUX_PAD(0x3C8, 0x9C, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT16__DISP0_DAT16 IOMUX_PAD(0x3CC, 0xA0, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT17__DISP0_DAT17 IOMUX_PAD(0x3D0, 0xA4, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT18__DISP0_DAT18 IOMUX_PAD(0x3D4, 0xA8, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT19__DISP0_DAT19 IOMUX_PAD(0x3D8, 0xAC, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT20__DISP0_DAT20 IOMUX_PAD(0x3DC, 0xB0, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT21__DISP0_DAT21 IOMUX_PAD(0x3E0, 0xB4, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT22__DISP0_DAT22 IOMUX_PAD(0x3E4, 0xB8, 0, 0x0, 0, PAD_CTRL_7) +#define MX53_PAD_DISP0_DAT23__DISP0_DAT23 IOMUX_PAD(0x3E8, 0xBC, 0, 0x0, 0, PAD_CTRL_7) + +/* CAN*/ +#define MX53_PAD_KEY_COL2__TXCAN1 IOMUX_PAD(0x35C, 0x34, 2, 0x0, 0, PAD_CTRL_4) +#define MX53_PAD_KEY_ROW2__RXCAN1 IOMUX_PAD(0x360, 0x38, 2, 0x760, 0, PAD_CTRL_3) +#define MX53_PAD_KEY_COL4__TXCAN2 IOMUX_PAD(0x36C, 0x44, 2, 0x0, 0, PAD_CTRL_4) +#define MX53_PAD_KEY_ROW4__RXCAN2 IOMUX_PAD(0x370, 0x48, 2, 0x764, 0, PAD_CTRL_3) + +/* AUD5 */ +#define MX53_PAD_KEY_COL0__AUD5_TXC IOMUX_PAD(0x34C, 0x24, 2, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_ROW0__AUD5_TXD IOMUX_PAD(0x350, 0x28, 2, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_COL1__AUD5_TXFS IOMUX_PAD(0x354, 0x2C, 2, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_KEY_ROW1__AUD5_RXD IOMUX_PAD(0x358, 0x30, 2, 0x0, 0, NO_PAD_CTRL) + +/* I2C1 */ +#define MX53_PAD_CSI0_D8__I2C1_SDA IOMUX_PAD(0x40C, 0xE0, 5 | IOMUX_CONFIG_SION, 0x818, 0, PAD_CTRL_9) +#define MX53_PAD_CSI0_D9__I2C1_SCL IOMUX_PAD(0x410, 0xE4, 5 | IOMUX_CONFIG_SION, 0x814, 0, PAD_CTRL_9) + +/* I2C2 */ +#define MX53_PAD_KEY_COL3__I2C2_SCL IOMUX_PAD(0x364, 0x3C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, PAD_CTRL_9) +#define MX53_PAD_KEY_ROW3__I2C2_SDA IOMUX_PAD(0x368, 0x40, 4 | IOMUX_CONFIG_SION, 0x820, 0, PAD_CTRL_9) + +/* UART1 */ +#define MX53_PAD_CSI0_D10__UART1_TXD IOMUX_PAD(0x414, 0xE8, 2, 0x0, 0, MX53_UART_PAD_CTRL) +#define MX53_PAD_CSI0_D11__UART1_RXD IOMUX_PAD(0x418, 0xEC, 2, 0x878, 1, MX53_UART_PAD_CTRL) + +/* UART2 */ +#define MX53_PAD_ATA_BUFFER_EN__UART2_RXD IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL) +#define MX53_PAD_ATA_DMARQ__UART2_TXD IOMUX_PAD(0x5F8, 0x278, 3, 0x0, 0, MX53_UART_PAD_CTRL) +#define MX53_PAD_ATA_DIOR__UART2_RTS IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL) +#define MX53_PAD_ATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, 0x0, 0, NO_PAD_CTRL) + +/* UART3 */ +#define MX53_PAD_ATA_CS_0__UART3_TXD IOMUX_PAD(0x61C, 0x29C, 4, 0x0, 0, MX53_UART_PAD_CTRL) +#define MX53_PAD_ATA_CS_1__UART3_RXD IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL) + +/* CSPI */ +#define MX53_PAD_EIM_D16__CSPI1_SCLK IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, PAD_CTRL_1) +#define MX53_PAD_EIM_D17__CSPI1_MISO IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, PAD_CTRL_1) +#define MX53_PAD_EIM_D18__CSPI1_MOSI IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, PAD_CTRL_1) + +/* LVDS0 */ +#define MX53_PAD_LVDS0_TX3_P__LVDS0_TX3 IOMUX_PAD(NON_PAD_I, 0x200, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS0_CLK_P__LVDS0_CLK IOMUX_PAD(NON_PAD_I, 0x204, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS0_TX2_P__LVDS0_TX2 IOMUX_PAD(NON_PAD_I, 0x208, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS0_TX1_P__LVDS0_TX1 IOMUX_PAD(NON_PAD_I, 0x20C, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS0_TX0_P__LVDS0_TX0 IOMUX_PAD(NON_PAD_I, 0x210, 1, 0x0, 0, NO_PAD_CTRL) + +/* LVDS1 */ +#define MX53_PAD_LVDS1_TX3_P__LVDS1_TX3 IOMUX_PAD(NON_PAD_I, 0x1EC, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS1_TX2_P__LVDS1_TX2 IOMUX_PAD(NON_PAD_I, 0x1F0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS1_CLK_P__LVDS1_CLK IOMUX_PAD(NON_PAD_I, 0x1F4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS1_TX1_P__LVDS1_TX1 IOMUX_PAD(NON_PAD_I, 0x1F8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_LVDS1_TX0_P__LVDS1_TX0 IOMUX_PAD(NON_PAD_I, 0x1FC, 1, 0x0, 0, NO_PAD_CTRL) + +/* SD1 */ +#define MX53_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x66C, 0x2E4, 0, 0x0, 0, \ + MX53_SDHC_PAD_CTRL) +#define MX53_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x670, 0x2E8, 0, 0x0, 0, \ + MX53_SDHC_PAD_CTRL) +#define MX53_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x674, 0x2EC, \ + IOMUX_CONFIG_SION, 0x0, 0, \ + MX53_SDHC_PAD_CTRL) +#define MX53_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x678, 0x2F0, 0, 0x0, 0, \ + MX53_SDHC_PAD_CTRL) +#define MX53_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x67C, 0x2F4, \ + IOMUX_CONFIG_SION, 0x0, 0, \ + MX53_SDHC_PAD_CTRL | PAD_CTL_HYS) +#define MX53_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x680, 0x2F8, 0, 0x0, 0, \ + MX53_SDHC_PAD_CTRL) + +/* SD2 */ +#define MX53_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x688, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x68C, 0x300, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_DATA0__SD2_DAT0 IOMUX_PAD(0x69C, 0x310, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_DATA1__SD2_DAT1 IOMUX_PAD(0x698, 0x30C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_DATA2__SD2_DAT2 IOMUX_PAD(0x694, 0x308, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_SD2_DATA3__SD2_DAT3 IOMUX_PAD(0x690, 0x304, 0, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA12__SD2_DAT4 IOMUX_PAD(0x658, 0x2D4, 2, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA13__SD2_DAT5 IOMUX_PAD(0x65C, 0x2D8, 2, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA14__SD2_DAT6 IOMUX_PAD(0x660, 0x2DC, 2, 0x0, 0, NO_PAD_CTRL) +#define MX53_PAD_ATA_DATA15__SD2_DAT7 IOMUX_PAD(0x664, 0x2E0, 2, 0x0, 0, NO_PAD_CTRL) + +/* SD3 */ +#define MX53_PAD_ATA_DATA8__SD3_DAT0 IOMUX_PAD(0x648, 0x2C4, 4, \ + 0x0, 0, MX53_SDHC_PAD_CTRL) +#define MX53_PAD_ATA_DATA9__SD3_DAT1 IOMUX_PAD(0x64C, 0x2C8, 4, \ + 0x0, 0, MX53_SDHC_PAD_CTRL) +#define MX53_PAD_ATA_DATA10__SD3_DAT2 IOMUX_PAD(0x650, 0x2CC, 4, 0x0, 0, \ + MX53_SDHC_PAD_CTRL) +#define MX53_PAD_ATA_DATA11__SD3_DAT3 IOMUX_PAD(0x654, 0x2D0, 4, 0x0, 0, \ + MX53_SDHC_PAD_CTRL) +#define MX53_PAD_ATA_DATA0__SD3_DAT4 IOMUX_PAD(0x628, 0x2A4, 4, \ + 0x0, 0, MX53_SDHC_PAD_CTRL) +#define MX53_PAD_ATA_DATA1__SD3_DAT5 IOMUX_PAD(0x62C, 0x2A8, 4, \ + 0x0, 0, MX53_SDHC_PAD_CTRL) +#define MX53_PAD_ATA_DATA2__SD3_DAT6 IOMUX_PAD(0x630, 0x2AC, 4, \ + 0x0, 0, MX53_SDHC_PAD_CTRL) +#define MX53_PAD_ATA_DATA3__SD3_DAT7 IOMUX_PAD(0x634, 0x2B0, 4, \ + 0x0, 0, MX53_SDHC_PAD_CTRL) +#define MX53_PAD_ATA_RESET_B__SD3_CMD IOMUX_PAD(0x608, 0x288, 2, 0x0, 0, \ + MX53_SDHC_PAD_CTRL) +#define MX53_PAD_ATA_IORDY__SD3_CLK IOMUX_PAD(0x60C, 0x28C, 2, \ + 0x0, 0, MX53_SDHC_PAD_CTRL | PAD_CTL_HYS) + +/* USB */ +#define MX53_PAD_EIM_A24__GPIO_5_4 IOMUX_PAD(0x4A8, 0x15C, 1, 0x0, 0, NO_PAD_CTRL) + +/* FEC */ +#define MX53_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, MX53_FEC_PAD_CTRL) +#define MX53_PAD_FEC_REF_CLK__FEC_REF_CLK IOMUX_PAD(0x5C8, 0x24C, 0, 0x0, 0, PAD_CTRL_8) +#define MX53_PAD_FEC_RX_ER__FEC_RX_ER IOMUX_PAD(0x5CC, 0x250, 0, 0x0, 0, PAD_CTRL_8) +#define MX53_PAD_FEC_CRS_DV__FEC_CRS_DV IOMUX_PAD(0x5D0, 0x254, 0, 0x0, 0, PAD_CTRL_8) +#define MX53_PAD_FEC_RXD1__FEC_RXD1 IOMUX_PAD(0x5D4, 0x258, 0, 0x0, 0, PAD_CTRL_8) +#define MX53_PAD_FEC_RXD0__FEC_RXD0 IOMUX_PAD(0x5D8, 0x25C, 0, 0x0, 0, PAD_CTRL_8) +#define MX53_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x5DC, 0x260, 0, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX53_PAD_FEC_TXD1__FEC_TXD1 IOMUX_PAD(0x5E0, 0x264, 0, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX53_PAD_FEC_TXD0__FEC_TXD0 IOMUX_PAD(0x5E4, 0x268, 0, 0x0, 0, PAD_CTL_DSE_HIGH) +#define MX53_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x5E8, 0x26C, 0, 0x0, 0, PAD_CTL_DSE_HIGH) + +#define MX53_PAD_GPIO_0__SSI_EXT1_CLK IOMUX_PAD(0x6A4, 0x314, 3, 0x0, 0, NO_PAD_CTRL) + +/* MLB */ +#define MX53_PAD_GPIO_2__MLBDAT IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, \ + PAD_CTRL_2 | PAD_CTL_PUS_360K_DOWN | \ + PAD_CTL_HYS) +#define MX53_PAD_GPIO_3__MLBCLK IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, \ + PAD_CTRL_2 | PAD_CTL_PUS_360K_DOWN | \ + PAD_CTL_HYS) +#define MX53_PAD_GPIO_6__MLBSIG IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, \ + PAD_CTRL_2 | PAD_CTL_PUS_360K_DOWN | \ + PAD_CTL_HYS) + +/* SPDIF */ +#define MX53_PAD_GPIO_19__SPDIF_TX1 IOMUX_PAD(0x348, 0x20, 3, 0x0, 0, \ + PAD_CTRL_3 | PAD_CTL_PUS_100K_UP) + +/* ESAI */ +#define MX53_PAD_FEC_MDIO__ESAI_SCKR IOMUX_PAD(0x5C4, 0x248, 2, \ + 0x7DC, 0, MX53_ESAI_PAD_CTRL) +#define MX53_PAD_FEC_REF_CLK__ESAI_FSR IOMUX_PAD(0x5C8, 0x24C, 2, \ + 0x7CC, 0, MX53_ESAI_PAD_CTRL) +#define MX53_PAD_FEC_RX_ER__ESAI_HCKR IOMUX_PAD(0x5CC, 0x250, 2, \ + 0x7D4, 0, MX53_ESAI_PAD_CTRL) +#define MX53_PAD_FEC_CRS_DV__ESAI_SCKT IOMUX_PAD(0x5D0, 0x254, 2, \ + 0x7E0, 0, MX53_ESAI_PAD_CTRL) +#define MX53_PAD_FEC_RXD1__ESAI_FST IOMUX_PAD(0x5D4, 0x258, 2, \ + 0x7D0, 0, MX53_ESAI_PAD_CTRL) +#define MX53_PAD_FEC_RXD0__ESAI_HCKT IOMUX_PAD(0x5D8, 0x25C, 2, \ + 0x7D8, 0, MX53_ESAI_PAD_CTRL) +#define MX53_PAD_FEC_TX_EN__ESAI_TX3_RX2 IOMUX_PAD(0x5DC, 0x260, 2, \ + 0x7F0, 0, MX53_ESAI_PAD_CTRL) +#define MX53_PAD_FEC_TXD1__ESAI_TX2_RX3 IOMUX_PAD(0x5E0, 0x264, 2, \ + 0x7EC, 0, MX53_ESAI_PAD_CTRL) +#define MX53_PAD_FEC_TXD0__ESAI_TX4_RX1 IOMUX_PAD(0x5E4, 0x268, 2, \ + 0x7F4, 0, MX53_ESAI_PAD_CTRL) +#define MX53_PAD_FEC_MDC__ESAI_TX5_RX0 IOMUX_PAD(0x5E8, 0x26C, 2, \ + 0x7F8, 0, MX53_ESAI_PAD_CTRL) +#define MX53_PAD_NANDF_CS2__ESAI_TX0 IOMUX_PAD(0x5B8, 0x240, 3, \ + 0x7E4, 0, MX53_ESAI_PAD_CTRL) +#define MX53_PAD_NANDF_CS3__ESAI_TX1 IOMUX_PAD(0x5BC, 0x244, 3, \ + 0x7E8, 0, MX53_ESAI_PAD_CTRL) + +#endif /* __MACH_IOMUX_MX53_H__ */ diff --git a/arch/arm/plat-mxs/include/mach/unique-id.h b/arch/arm/plat-mxs/include/mach/unique-id.h new file mode 100644 index 000000000000..de5e04342ef5 --- /dev/null +++ b/arch/arm/plat-mxs/include/mach/unique-id.h @@ -0,0 +1,30 @@ +/* + * Unique ID interface for ID storage providers + * + * Embedded Alley Solutions, Inc <source@embeddedalley.com> + * + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#ifndef __UNIQUE_ID_H +#define __UNIQUE_ID_H + +struct uid_ops { + ssize_t (*id_show)(void *context, char *page, int ascii); + ssize_t (*id_store)(void *context, const char *page, + size_t count, int ascii); +}; + +struct kobject *uid_provider_init(const char *name, + struct uid_ops *ops, void *context); +void uid_provider_remove(const char *name); +#endif diff --git a/arch/arm/plat-mxs/unique-id.c b/arch/arm/plat-mxs/unique-id.c new file mode 100644 index 000000000000..35c0fcdab605 --- /dev/null +++ b/arch/arm/plat-mxs/unique-id.c @@ -0,0 +1,198 @@ +/* + * Unique ID manipulation sysfs access generic functions + * + * Author: dmitry pervushin <dimka@embeddedalley.com> + * + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/kobject.h> +#include <linux/string.h> +#include <linux/sysfs.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/err.h> +#include <linux/timer.h> +#include <linux/spinlock.h> + +#include <mach/unique-id.h> + +static int unlock; +static spinlock_t u_lock; +static const unsigned long UID_AUTOLOCK_TIMEOUT = HZ * 60 * 3; +static struct timer_list u_timer; + +static void uid_timer_autolock(unsigned long param) +{ + struct timer_list *tmr = (struct timer_list *)param; + + if (spin_trylock(&u_lock)) { + if (unlock) + pr_debug("%s: locked down.\n", __func__); + unlock = 0; + spin_unlock(&u_lock); + } + mod_timer(tmr, jiffies + UID_AUTOLOCK_TIMEOUT); +} + +static LIST_HEAD(uid_provider_list); + +struct uid_provider { + struct kobject *kobj; + struct list_head list; + struct uid_ops *ops; + void *context; +}; + +static struct uid_provider *uid_provider_find(const char *name); + +#define UID_FWD_SYSFS_FILE(var, file, param) \ + static ssize_t var##_show(struct kobject *kobj, \ + struct kobj_attribute *attr, char *buf) \ + { \ + struct uid_provider *p = \ + uid_provider_find(kobject_name(kobj)); \ + ssize_t r; \ + BUG_ON(p == NULL); \ + r = (p->ops && p->ops->file##_show) ? \ + p->ops->file##_show(p->context, buf, param) : 0;\ + return r; \ + } \ + \ + static ssize_t var##_store(struct kobject *kobj, \ + struct kobj_attribute *attr, const char *buf, \ + size_t count) \ + { \ + struct uid_provider *p = \ + uid_provider_find(kobject_name(kobj)); \ + ssize_t r; \ + int ul; \ + BUG_ON(p == NULL); \ + spin_lock(&u_lock); \ + ul = unlock; \ + spin_unlock(&u_lock); \ + if (ul) \ + r = (p->ops && p->ops->file##_store) ? \ + p->ops->file##_store(p->context, buf, count, param) \ + : count; \ + else \ + r = -EACCES; \ + return r; \ + } + +struct kobject *uid_kobj; + +#define UID_ATTR(_name, _varname) \ + static struct kobj_attribute _varname##_attr = \ + __ATTR(_name, 0644, _varname##_show, _varname##_store) + +UID_FWD_SYSFS_FILE(id, id, 1); +UID_FWD_SYSFS_FILE(id_bin, id, 0); +UID_ATTR(id, id); +UID_ATTR(id.bin, id_bin); + +static struct attribute *uid_attrs[] = { + &id_attr.attr, + &id_bin_attr.attr, + NULL +}; + +static struct attribute_group uid_attr_group = { + .attrs = uid_attrs, +}; + +struct kobject *uid_provider_init(const char *name, + struct uid_ops *ops, void *context) +{ + struct uid_provider *new; + int err; + + new = kzalloc(sizeof(*new), GFP_KERNEL); + if (!new) { + err = -ENOMEM; + goto out; + } + + new->kobj = kobject_create_and_add(name, uid_kobj); + if (!new->kobj) { + err = -ENOMEM; + goto out; + } + new->ops = ops; + new->context = context; + + err = sysfs_create_group(new->kobj, &uid_attr_group); + if (err) + goto out2; + + list_add_tail(&new->list, &uid_provider_list); + return new->kobj; +out2: + kobject_del(new->kobj); +out: + kfree(new); + return ERR_PTR(err); +} +EXPORT_SYMBOL_GPL(uid_provider_init); + +static struct uid_provider *uid_provider_find(const char *name) +{ + struct uid_provider *p; + + list_for_each_entry(p, &uid_provider_list, list) { + if (strcmp(kobject_name(p->kobj), name) == 0) + return p; + } + return NULL; +} + +void uid_provider_remove(const char *name) +{ + struct uid_provider *p; + + p = uid_provider_find(name); + if (!p) + return; + kobject_del(p->kobj); + list_del(&p->list); + kfree(p); +} +EXPORT_SYMBOL_GPL(uid_provider_remove); + +static int uid_sysfs_init(void) +{ + int error; + + uid_kobj = kobject_create_and_add("uid", NULL); + if (!uid_kobj) { + error = -ENOMEM; + goto out1; + } + + spin_lock_init(&u_lock); + setup_timer(&u_timer, uid_timer_autolock, (unsigned long)&u_timer); + + /* try to lock each 3 minutes */ + mod_timer(&u_timer, jiffies + UID_AUTOLOCK_TIMEOUT); + return 0; + +out1: + printk(KERN_ERR"%s failed, error %d.", __func__, error); + return error; +} + +module_param(unlock, int, 0600) +core_initcall(uid_sysfs_init); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("dmitry pervushin <dimka@embeddedalley.com>"); +MODULE_DESCRIPTION("Unique ID simple framework"); |