diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/configs/pcm052_defconfig | 35 | ||||
| -rw-r--r-- | arch/arm/mach-mvf/board-pcm052.c | 4 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/devices/platform-mvf-dcu.c | 4 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/iomux-mvf.h | 4 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/include/mach/irqs.h | 7 |
5 files changed, 47 insertions, 7 deletions
diff --git a/arch/arm/configs/pcm052_defconfig b/arch/arm/configs/pcm052_defconfig index 2ba4cafb5815..bd13e16e0cea 100644 --- a/arch/arm/configs/pcm052_defconfig +++ b/arch/arm/configs/pcm052_defconfig @@ -660,7 +660,40 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_MG_DISK is not set # CONFIG_BLK_DEV_RBD is not set # CONFIG_SENSORS_LIS3LV02D is not set -# CONFIG_MISC_DEVICES is not set +CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set +# CONFIG_INTEL_MID_PTI is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_APDS9802ALS is not set +# CONFIG_ISL29003 is not set +# CONFIG_ISL29020 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_BH1780 is not set +# CONFIG_SENSORS_BH1770 is not set +# CONFIG_SENSORS_APDS990X is not set +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set +# CONFIG_BMP085 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IWMC3200TOP is not set + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_TI_ST is not set +# CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_SENSORS_LIS3_I2C is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set diff --git a/arch/arm/mach-mvf/board-pcm052.c b/arch/arm/mach-mvf/board-pcm052.c index dc583b4a69f5..08b071f1dcf7 100644 --- a/arch/arm/mach-mvf/board-pcm052.c +++ b/arch/arm/mach-mvf/board-pcm052.c @@ -436,7 +436,7 @@ static struct stmpe_ts_platform_data pba_ts_stm_pdata = { static struct stmpe_platform_data pba_stm_pdata = { .blocks = STMPE_BLOCK_GPIO | STMPE_BLOCK_TOUCHSCREEN, - .irq_base = NR_IRQS, + .irq_base = STMPE_IRQ_BASE, .irq_trigger = IRQF_TRIGGER_RISING, .irq_invert_polarity = true, .gpio = &pba_gpio_stm_data, @@ -457,7 +457,7 @@ static struct i2c_board_info pcm052_i2c2_board_info[] __initdata = { }, { I2C_BOARD_INFO("stmpe811", 0x41), - .irq = PCM052_TS_IRQ, + .irq = gpio_to_irq(PCM052_TS_IRQ), .platform_data = &pba_stm_pdata, }, }; diff --git a/arch/arm/plat-mxc/devices/platform-mvf-dcu.c b/arch/arm/plat-mxc/devices/platform-mvf-dcu.c index 0fe5099eca34..15f6f0dbe24e 100644 --- a/arch/arm/plat-mxc/devices/platform-mvf-dcu.c +++ b/arch/arm/plat-mxc/devices/platform-mvf-dcu.c @@ -28,10 +28,10 @@ int __init mvf_dcu_init(int id) ret = gpio_request_one(DCU_LCD_ENABLE_PIN, GPIOF_OUT_INIT_LOW, "DCU"); if (ret) - printk(KERN_ERR "DCU: failed to request GPIO 30\n"); + printk(KERN_ERR "DCU: failed to request GPIO 25\n"); msleep(2); - gpio_set_value(DCU_LCD_ENABLE_PIN, 1); + gpio_set_value(DCU_LCD_ENABLE_PIN, 0); writel(0x20000000, MVF_IO_ADDRESS(MVF_TCON0_BASE_ADDR)); return ret; diff --git a/arch/arm/plat-mxc/include/mach/iomux-mvf.h b/arch/arm/plat-mxc/include/mach/iomux-mvf.h index fbc0571f8b9f..a838e0bbead9 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mvf.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mvf.h @@ -356,8 +356,8 @@ typedef enum iomux_config { /* Touch Screen */ #define MVF600_PAD32_PTB10_TS_IRQ \ - IOMUX_PAD(0x0080, 0x0080, 0, 0x0000, 0, \ - MVF600_GPIO_GENERAL_CTRL | PAD_CTL_IBE_ENABLE) + IOMUX_PAD(0x0080, 0x0080, 0, 0x0000, 0, \ + PAD_CTL_SPEED_MED | PAD_CTL_IBE_ENABLE) /*QSPI*/ #define MVF600_PAD79_PTD0_QSPI0_A_SCK \ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index 9fce85784a32..4edd8d91c57d 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -74,7 +74,14 @@ #define MX5_IPU_IRQS 0 #endif +#ifdef CONFIG_MACH_PCM052 +#define STMPE_IRQ_BASE (MXC_IPU_IRQ_START) +#define STMPE_MAX_GPIOS 24 +#define STMPE_IRQ_END (STMPE_IRQ_BASE + STMPE_MAX_GPIOS) +#define NR_IRQS (STMPE_IRQ_END) +#else #define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS + MX5_IPU_IRQS) +#endif extern int imx_irq_set_priority(unsigned char irq, unsigned char prio); |