summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-davinci/Kconfig1
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c4
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c10
-rw-r--r--arch/arm/mach-omap2/omap-pm.h2
-rw-r--r--arch/arm/mach-omap2/opp.c6
-rw-r--r--arch/arm/mach-omap2/pm.c8
-rw-r--r--arch/arm/mach-pxa/Kconfig3
-rw-r--r--arch/arm/mach-sa1100/generic.c81
-rw-r--r--arch/arm/mach-sa1100/generic.h7
-rw-r--r--arch/arm/mach-ux500/Kconfig1
10 files changed, 36 insertions, 87 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index e026b19b23ea..a075b3e0c5c7 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -40,7 +40,6 @@ config ARCH_DAVINCI_DA850
bool "DA850/OMAP-L138/AM18x based system"
select ARCH_DAVINCI_DA8XX
select ARCH_HAS_CPUFREQ
- select CPU_FREQ_TABLE
select CP_INTC
config ARCH_DAVINCI_DA8XX
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 90372a21087f..699aabe296e1 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -25,7 +25,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
#include <linux/phy.h>
#include <linux/reboot.h>
#include <linux/regmap.h>
@@ -226,7 +226,7 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
val = readl_relaxed(base + OCOTP_CFG3);
val >>= OCOTP_CFG3_SPEED_SHIFT;
if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ)
- if (opp_disable(cpu_dev, 1200000000))
+ if (dev_pm_opp_disable(cpu_dev, 1200000000))
pr_warn("failed to disable 1.2 GHz OPP\n");
put_node:
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index f26918467efc..6432ab8d9207 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -25,7 +25,7 @@
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
#include <linux/cpu.h>
#include <linux/mtd/mtd.h>
@@ -522,11 +522,11 @@ static int __init beagle_opp_init(void)
return -ENODEV;
}
/* Enable MPU 1GHz and lower opps */
- r = opp_enable(mpu_dev, 800000000);
+ r = dev_pm_opp_enable(mpu_dev, 800000000);
/* TODO: MPU 1GHz needs SR and ABB */
/* Enable IVA 800MHz and lower opps */
- r |= opp_enable(iva_dev, 660000000);
+ r |= dev_pm_opp_enable(iva_dev, 660000000);
/* TODO: DSP 800MHz needs SR and ABB */
if (r) {
pr_err("%s: failed to enable higher opp %d\n",
@@ -535,8 +535,8 @@ static int __init beagle_opp_init(void)
* Cleanup - disable the higher freqs - we dont care
* about the results
*/
- opp_disable(mpu_dev, 800000000);
- opp_disable(iva_dev, 660000000);
+ dev_pm_opp_disable(mpu_dev, 800000000);
+ dev_pm_opp_disable(iva_dev, 660000000);
}
}
return 0;
diff --git a/arch/arm/mach-omap2/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h
index 67faa7b8fe92..1d777e63e05c 100644
--- a/arch/arm/mach-omap2/omap-pm.h
+++ b/arch/arm/mach-omap2/omap-pm.h
@@ -17,7 +17,7 @@
#include <linux/device.h>
#include <linux/cpufreq.h>
#include <linux/clk.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
/*
* agent_id values for use with omap_pm_set_min_bus_tput():
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index bd41d59a7cab..ec21e6eb03e1 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -17,7 +17,7 @@
* GNU General Public License for more details.
*/
#include <linux/module.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
#include <linux/cpu.h>
#include "omap_device.h"
@@ -81,14 +81,14 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def,
dev = &oh->od->pdev->dev;
}
- r = opp_add(dev, opp_def->freq, opp_def->u_volt);
+ r = dev_pm_opp_add(dev, opp_def->freq, opp_def->u_volt);
if (r) {
dev_err(dev, "%s: add OPP %ld failed for %s [%d] result=%d\n",
__func__, opp_def->freq,
opp_def->hwmod_name, i, r);
} else {
if (!opp_def->default_available)
- r = opp_disable(dev, opp_def->freq);
+ r = dev_pm_opp_disable(dev, opp_def->freq);
if (r)
dev_err(dev, "%s: disable %ld failed for %s [%d] result=%d\n",
__func__, opp_def->freq,
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index e742118fcfd2..2f569b3c3092 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/err.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
#include <linux/export.h>
#include <linux/suspend.h>
#include <linux/cpu.h>
@@ -131,7 +131,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
{
struct voltagedomain *voltdm;
struct clk *clk;
- struct opp *opp;
+ struct dev_pm_opp *opp;
unsigned long freq, bootup_volt;
struct device *dev;
@@ -172,7 +172,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
clk_put(clk);
rcu_read_lock();
- opp = opp_find_freq_ceil(dev, &freq);
+ opp = dev_pm_opp_find_freq_ceil(dev, &freq);
if (IS_ERR(opp)) {
rcu_read_unlock();
pr_err("%s: unable to find boot up OPP for vdd_%s\n",
@@ -180,7 +180,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
goto exit;
}
- bootup_volt = opp_get_voltage(opp);
+ bootup_volt = dev_pm_opp_get_voltage(opp);
rcu_read_unlock();
if (!bootup_volt) {
pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n",
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a8427115ee07..96100dbf5a2e 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -615,14 +615,12 @@ endmenu
config PXA25x
bool
select CPU_XSCALE
- select CPU_FREQ_TABLE if CPU_FREQ
help
Select code specific to PXA21x/25x/26x variants
config PXA27x
bool
select CPU_XSCALE
- select CPU_FREQ_TABLE if CPU_FREQ
help
Select code specific to PXA27x variants
@@ -635,7 +633,6 @@ config CPU_PXA26x
config PXA3xx
bool
select CPU_XSC3
- select CPU_FREQ_TABLE if CPU_FREQ
help
Select code specific to PXA3xx variants
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index f25b6119e028..d4ea142c4edd 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -42,74 +42,31 @@ EXPORT_SYMBOL(reset_status);
/*
* This table is setup for a 3.6864MHz Crystal.
*/
-static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
- 590, /* 59.0 MHz */
- 737, /* 73.7 MHz */
- 885, /* 88.5 MHz */
- 1032, /* 103.2 MHz */
- 1180, /* 118.0 MHz */
- 1327, /* 132.7 MHz */
- 1475, /* 147.5 MHz */
- 1622, /* 162.2 MHz */
- 1769, /* 176.9 MHz */
- 1917, /* 191.7 MHz */
- 2064, /* 206.4 MHz */
- 2212, /* 221.2 MHz */
- 2359, /* 235.9 MHz */
- 2507, /* 250.7 MHz */
- 2654, /* 265.4 MHz */
- 2802 /* 280.2 MHz */
+struct cpufreq_frequency_table sa11x0_freq_table[NR_FREQS+1] = {
+ { .frequency = 59000, /* 59.0 MHz */},
+ { .frequency = 73700, /* 73.7 MHz */},
+ { .frequency = 88500, /* 88.5 MHz */},
+ { .frequency = 103200, /* 103.2 MHz */},
+ { .frequency = 118000, /* 118.0 MHz */},
+ { .frequency = 132700, /* 132.7 MHz */},
+ { .frequency = 147500, /* 147.5 MHz */},
+ { .frequency = 162200, /* 162.2 MHz */},
+ { .frequency = 176900, /* 176.9 MHz */},
+ { .frequency = 191700, /* 191.7 MHz */},
+ { .frequency = 206400, /* 206.4 MHz */},
+ { .frequency = 221200, /* 221.2 MHz */},
+ { .frequency = 235900, /* 235.9 MHz */},
+ { .frequency = 250700, /* 250.7 MHz */},
+ { .frequency = 265400, /* 265.4 MHz */},
+ { .frequency = 280200, /* 280.2 MHz */},
+ { .frequency = CPUFREQ_TABLE_END, },
};
-/* rounds up(!) */
-unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
-{
- int i;
-
- khz /= 100;
-
- for (i = 0; i < NR_FREQS; i++)
- if (cclk_frequency_100khz[i] >= khz)
- break;
-
- return i;
-}
-
-unsigned int sa11x0_ppcr_to_freq(unsigned int idx)
-{
- unsigned int freq = 0;
- if (idx < NR_FREQS)
- freq = cclk_frequency_100khz[idx] * 100;
- return freq;
-}
-
-
-/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
- * this platform, anyway.
- */
-int sa11x0_verify_speed(struct cpufreq_policy *policy)
-{
- unsigned int tmp;
- if (policy->cpu)
- return -EINVAL;
-
- cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
- /* make sure that at least one frequency is within the policy */
- tmp = cclk_frequency_100khz[sa11x0_freq_to_ppcr(policy->min)] * 100;
- if (tmp > policy->max)
- policy->max = tmp;
-
- cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
- return 0;
-}
-
unsigned int sa11x0_getspeed(unsigned int cpu)
{
if (cpu)
return 0;
- return cclk_frequency_100khz[PPCR & 0xf] * 100;
+ return sa11x0_freq_table[PPCR & 0xf].frequency;
}
/*
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 9a33695c9492..0d92e119b36b 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -3,6 +3,7 @@
*
* Author: Nicolas Pitre
*/
+#include <linux/cpufreq.h>
#include <linux/reboot.h>
extern void sa1100_timer_init(void);
@@ -19,12 +20,8 @@ extern void sa11x0_init_late(void);
extern void sa1110_mb_enable(void);
extern void sa1110_mb_disable(void);
-struct cpufreq_policy;
-
-extern unsigned int sa11x0_freq_to_ppcr(unsigned int khz);
-extern int sa11x0_verify_speed(struct cpufreq_policy *policy);
+extern struct cpufreq_frequency_table sa11x0_freq_table[];
extern unsigned int sa11x0_getspeed(unsigned int cpu);
-extern unsigned int sa11x0_ppcr_to_freq(unsigned int idx);
struct flash_platform_data;
struct resource;
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 99a28d628297..7a3fc1af6944 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -34,7 +34,6 @@ config UX500_SOC_COMMON
config UX500_SOC_DB8500
bool
- select CPU_FREQ_TABLE if CPU_FREQ
select MFD_DB8500_PRCMU
select PINCTRL_DB8500
select PINCTRL_DB8540
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-16 20:05:06 +0000