diff options
Diffstat (limited to 'arch/arm')
67 files changed, 791 insertions, 563 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5cff165b7eb0..166efa2a19cd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1177,6 +1177,31 @@ config ARM_ERRATA_743622 visible impact on the overall performance or power consumption of the processor. +config ARM_ERRATA_751472 + bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation" + depends on CPU_V7 && SMP + help + This option enables the workaround for the 751472 Cortex-A9 (prior + to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the + completion of a following broadcasted operation if the second + operation is received by a CPU before the ICIALLUIS has completed, + potentially leading to corrupted entries in the cache or TLB. + +config ARM_ERRATA_753970 + bool "ARM errata: cache sync operation may be faulty" + depends on CACHE_PL310 + help + This option enables the workaround for the 753970 PL310 (r3p0) erratum. + + Under some condition the effect of cache sync operation on + the store buffer still remains when the operation completes. + This means that the store buffer is always asked to drain and + this prevents it from merging any further writes. The workaround + is to replace the normal offset of cache sync operation (0x730) + by another offset targeting an unmapped PL310 register 0x740. + This has the same effect as the cache sync operation: store buffer + drain and waiting for all buffers empty. + endmenu source "arch/arm/common/Kconfig" @@ -1391,7 +1416,7 @@ config AEABI config OABI_COMPAT bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" - depends on AEABI && EXPERIMENTAL + depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL default y help This option preserves the old syscall interface along with the diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c22c1adfedd6..6f7b29294c80 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -15,7 +15,7 @@ ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 endif -OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S +OBJCOPYFLAGS :=-O binary -R .comment -S GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe # Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb: diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index ab204db594d3..c6028967d336 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -1,3 +1,7 @@ font.c -piggy.gz +lib1funcs.S +piggy.gzip +piggy.lzo +piggy.lzma +vmlinux vmlinux.lds diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 5aeec1e1735c..16bd48031583 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -36,6 +36,7 @@ #define L2X0_RAW_INTR_STAT 0x21C #define L2X0_INTR_CLEAR 0x220 #define L2X0_CACHE_SYNC 0x730 +#define L2X0_DUMMY_REG 0x740 #define L2X0_INV_LINE_PA 0x770 #define L2X0_INV_WAY 0x77C #define L2X0_CLEAN_LINE_PA 0x7B0 diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index 721847dc68ab..e0d1c0cfa548 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -58,6 +58,9 @@ static inline void sysctl_soft_reset(void __iomem *base) { + /* switch to slow mode */ + writel(0x2, base + SCCTRL); + /* writing any value to SCSYSSTAT reg will reset system */ writel(0, base + SCSYSSTAT); } diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index f41a6f57cd12..82dfe5d0c41e 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -18,16 +18,34 @@ #define __ASMARM_TLB_H #include <asm/cacheflush.h> -#include <asm/tlbflush.h> #ifndef CONFIG_MMU #include <linux/pagemap.h> + +#define tlb_flush(tlb) ((void) tlb) + #include <asm-generic/tlb.h> #else /* !CONFIG_MMU */ +#include <linux/swap.h> #include <asm/pgalloc.h> +#include <asm/tlbflush.h> + +/* + * We need to delay page freeing for SMP as other CPUs can access pages + * which have been removed but not yet had their TLB entries invalidated. + * Also, as ARMv7 speculative prefetch can drag new entries into the TLB, + * we need to apply this same delaying tactic to ensure correct operation. + */ +#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7) +#define tlb_fast_mode(tlb) 0 +#define FREE_PTE_NR 500 +#else +#define tlb_fast_mode(tlb) 1 +#define FREE_PTE_NR 0 +#endif /* * TLB handling. This allows us to remove pages from the page @@ -36,12 +54,58 @@ struct mmu_gather { struct mm_struct *mm; unsigned int fullmm; + struct vm_area_struct *vma; unsigned long range_start; unsigned long range_end; + unsigned int nr; + struct page *pages[FREE_PTE_NR]; }; DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); +/* + * This is unnecessarily complex. There's three ways the TLB shootdown + * code is used: + * 1. Unmapping a range of vmas. See zap_page_range(), unmap_region(). + * tlb->fullmm = 0, and tlb_start_vma/tlb_end_vma will be called. + * tlb->vma will be non-NULL. + * 2. Unmapping all vmas. See exit_mmap(). + * tlb->fullmm = 1, and tlb_start_vma/tlb_end_vma will be called. + * tlb->vma will be non-NULL. Additionally, page tables will be freed. + * 3. Unmapping argument pages. See shift_arg_pages(). + * tlb->fullmm = 0, but tlb_start_vma/tlb_end_vma will not be called. + * tlb->vma will be NULL. + */ +static inline void tlb_flush(struct mmu_gather *tlb) +{ + if (tlb->fullmm || !tlb->vma) + flush_tlb_mm(tlb->mm); + else if (tlb->range_end > 0) { + flush_tlb_range(tlb->vma, tlb->range_start, tlb->range_end); + tlb->range_start = TASK_SIZE; + tlb->range_end = 0; + } +} + +static inline void tlb_add_flush(struct mmu_gather *tlb, unsigned long addr) +{ + if (!tlb->fullmm) { + if (addr < tlb->range_start) + tlb->range_start = addr; + if (addr + PAGE_SIZE > tlb->range_end) + tlb->range_end = addr + PAGE_SIZE; + } +} + +static inline void tlb_flush_mmu(struct mmu_gather *tlb) +{ + tlb_flush(tlb); + if (!tlb_fast_mode(tlb)) { + free_pages_and_swap_cache(tlb->pages, tlb->nr); + tlb->nr = 0; + } +} + static inline struct mmu_gather * tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) { @@ -49,6 +113,8 @@ tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) tlb->mm = mm; tlb->fullmm = full_mm_flush; + tlb->vma = NULL; + tlb->nr = 0; return tlb; } @@ -56,8 +122,7 @@ tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) static inline void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) { - if (tlb->fullmm) - flush_tlb_mm(tlb->mm); + tlb_flush_mmu(tlb); /* keep the page table cache within bounds */ check_pgt_cache(); @@ -71,12 +136,7 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) static inline void tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr) { - if (!tlb->fullmm) { - if (addr < tlb->range_start) - tlb->range_start = addr; - if (addr + PAGE_SIZE > tlb->range_end) - tlb->range_end = addr + PAGE_SIZE; - } + tlb_add_flush(tlb, addr); } /* @@ -89,6 +149,7 @@ tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { if (!tlb->fullmm) { flush_cache_range(vma, vma->vm_start, vma->vm_end); + tlb->vma = vma; tlb->range_start = TASK_SIZE; tlb->range_end = 0; } @@ -97,12 +158,30 @@ tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) { - if (!tlb->fullmm && tlb->range_end > 0) - flush_tlb_range(vma, tlb->range_start, tlb->range_end); + if (!tlb->fullmm) + tlb_flush(tlb); +} + +static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) +{ + if (tlb_fast_mode(tlb)) { + free_page_and_swap_cache(page); + } else { + tlb->pages[tlb->nr++] = page; + if (tlb->nr >= FREE_PTE_NR) + tlb_flush_mmu(tlb); + } +} + +static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, + unsigned long addr) +{ + pgtable_page_dtor(pte); + tlb_add_flush(tlb, addr); + tlb_remove_page(tlb, pte); } -#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) -#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep) +#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr) #define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp) #define tlb_migrate_finish(mm) do { } while (0) diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index ce7378ea15a2..d2005de383b8 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -10,12 +10,7 @@ #ifndef _ASMARM_TLBFLUSH_H #define _ASMARM_TLBFLUSH_H - -#ifndef CONFIG_MMU - -#define tlb_flush(tlb) ((void) tlb) - -#else /* CONFIG_MMU */ +#ifdef CONFIG_MMU #include <asm/glue.h> diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index c0225da3fb21..f06ff9feb0db 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -391,6 +391,7 @@ ENDPROC(__turn_mmu_on) #ifdef CONFIG_SMP_ON_UP + __INIT __fixup_smp: and r3, r9, #0x000f0000 @ architecture version teq r3, #0x000f0000 @ CPU ID supported? @@ -415,18 +416,7 @@ __fixup_smp_on_up: sub r3, r0, r3 add r4, r4, r3 add r5, r5, r3 -2: cmp r4, r5 - movhs pc, lr - ldmia r4!, {r0, r6} - ARM( str r6, [r0, r3] ) - THUMB( add r0, r0, r3 ) -#ifdef __ARMEB__ - THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian. -#endif - THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords - THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3. - THUMB( strh r6, [r0] ) - b 2b + b __do_fixup_smp_on_up ENDPROC(__fixup_smp) .align @@ -440,7 +430,31 @@ smp_on_up: ALT_SMP(.long 1) ALT_UP(.long 0) .popsection +#endif + .text +__do_fixup_smp_on_up: + cmp r4, r5 + movhs pc, lr + ldmia r4!, {r0, r6} + ARM( str r6, [r0, r3] ) + THUMB( add r0, r0, r3 ) +#ifdef __ARMEB__ + THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian. #endif + THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords + THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3. + THUMB( strh r6, [r0] ) + b __do_fixup_smp_on_up +ENDPROC(__do_fixup_smp_on_up) + +ENTRY(fixup_smp) + stmfd sp!, {r4 - r6, lr} + mov r4, r0 + add r5, r0, r1 + mov r3, #0 + bl __do_fixup_smp_on_up + ldmfd sp!, {r4 - r6, pc} +ENDPROC(fixup_smp) #include "head-common.S" diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index c9f3f0467570..d600bd350704 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -137,11 +137,10 @@ static u8 get_debug_arch(void) u32 didr; /* Do we implement the extended CPUID interface? */ - if (((read_cpuid_id() >> 16) & 0xf) != 0xf) { - pr_warning("CPUID feature registers not supported. " - "Assuming v6 debug is present.\n"); + if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf), + "CPUID feature registers not supported. " + "Assuming v6 debug is present.\n")) return ARM_DEBUG_ARCH_V6; - } ARM_DBG_READ(c0, 0, didr); return (didr >> 16) & 0xf; @@ -152,6 +151,12 @@ u8 arch_get_debug_arch(void) return debug_arch; } +static int debug_arch_supported(void) +{ + u8 arch = get_debug_arch(); + return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14; +} + /* Determine number of BRP register available. */ static int get_num_brp_resources(void) { @@ -268,6 +273,9 @@ out: int hw_breakpoint_slots(int type) { + if (!debug_arch_supported()) + return 0; + /* * We can be called early, so don't rely on * our static variables being initialised. @@ -834,11 +842,11 @@ static void reset_ctrl_regs(void *unused) /* * v7 debug contains save and restore registers so that debug state - * can be maintained across low-power modes without leaving - * the debug logic powered up. It is IMPLEMENTATION DEFINED whether - * we can write to the debug registers out of reset, so we must - * unlock the OS Lock Access Register to avoid taking undefined - * instruction exceptions later on. + * can be maintained across low-power modes without leaving the debug + * logic powered up. It is IMPLEMENTATION DEFINED whether we can access + * the debug registers out of reset, so we must unlock the OS Lock + * Access Register to avoid taking undefined instruction exceptions + * later on. */ if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) { /* @@ -882,7 +890,7 @@ static int __init arch_hw_breakpoint_init(void) debug_arch = get_debug_arch(); - if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) { + if (!debug_arch_supported()) { pr_info("debug architecture 0x%x unsupported.\n", debug_arch); return 0; } @@ -899,18 +907,18 @@ static int __init arch_hw_breakpoint_init(void) pr_info("%d breakpoint(s) reserved for watchpoint " "single-step.\n", core_num_reserved_brps); + /* + * Reset the breakpoint resources. We assume that a halting + * debugger will leave the world in a nice state for us. + */ + on_each_cpu(reset_ctrl_regs, NULL, 1); + ARM_DBG_READ(c1, 0, dscr); if (dscr & ARM_DSCR_HDBGEN) { + max_watchpoint_len = 4; pr_warning("halting debug mode enabled. Assuming maximum " - "watchpoint size of 4 bytes."); + "watchpoint size of %u bytes.", max_watchpoint_len); } else { - /* - * Reset the breakpoint resources. We assume that a halting - * debugger will leave the world in a nice state for us. - */ - smp_call_function(reset_ctrl_regs, NULL, 1); - reset_ctrl_regs(NULL); - /* Work out the maximum supported watchpoint length. */ max_watchpoint_len = get_max_wp_len(); pr_info("maximum watchpoint size is %u bytes.\n", diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c index 2c1f0050c9c4..8f6ed43861f1 100644 --- a/arch/arm/kernel/kprobes-decode.c +++ b/arch/arm/kernel/kprobes-decode.c @@ -1437,7 +1437,7 @@ arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi) return space_cccc_1100_010x(insn, asi); - } else if ((insn & 0x0e000000) == 0x0c400000) { + } else if ((insn & 0x0e000000) == 0x0c000000) { return space_cccc_110x(insn, asi); diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 2cfe8161b478..6d4105e6872f 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -22,6 +22,7 @@ #include <asm/pgtable.h> #include <asm/sections.h> +#include <asm/smp_plat.h> #include <asm/unwind.h> #ifdef CONFIG_XIP_KERNEL @@ -268,12 +269,28 @@ struct mod_unwind_map { const Elf_Shdr *txt_sec; }; +static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr, + const Elf_Shdr *sechdrs, const char *name) +{ + const Elf_Shdr *s, *se; + const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + + for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) + if (strcmp(name, secstrs + s->sh_name) == 0) + return s; + + return NULL; +} + +extern void fixup_smp(const void *, unsigned long); + int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mod) { + const Elf_Shdr * __maybe_unused s = NULL; #ifdef CONFIG_ARM_UNWIND const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - const Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum; + const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum; struct mod_unwind_map maps[ARM_SEC_MAX]; int i; @@ -315,6 +332,9 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, maps[i].txt_sec->sh_addr, maps[i].txt_sec->sh_size); #endif + s = find_mod_section(hdr, sechdrs, ".alt.smp.init"); + if (s && !is_smp()) + fixup_smp((void *)s->sh_addr, s->sh_size); return 0; } diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 5efa2647a2fb..d150ad1ccb5d 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -700,7 +700,7 @@ user_backtrace(struct frame_tail __user *tail, * Frame pointers should strictly progress back up the stack * (towards higher addresses). */ - if (tail >= buftail.fp) + if (tail + 1 >= buftail.fp) return NULL; return buftail.fp - 1; diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index b8af96ea62e6..2c79eec19262 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -97,28 +97,34 @@ set_irq_affinity(int irq, irq, cpu); return err; #else - return 0; + return -EINVAL; #endif } static int init_cpu_pmu(void) { - int i, err = 0; + int i, irqs, err = 0; struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU]; - if (!pdev) { - err = -ENODEV; - goto out; - } + if (!pdev) + return -ENODEV; + + irqs = pdev->num_resources; + + /* + * If we have a single PMU interrupt that we can't shift, assume that + * we're running on a uniprocessor machine and continue. + */ + if (irqs == 1 && !irq_can_set_affinity(platform_get_irq(pdev, 0))) + return 0; - for (i = 0; i < pdev->num_resources; ++i) { + for (i = 0; i < irqs; ++i) { err = set_irq_affinity(platform_get_irq(pdev, i), i); if (err) break; } -out: return err; } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 420b8d6485d6..5ea4fb718b97 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -226,8 +226,8 @@ int cpu_architecture(void) * Register 0 and check for VMSAv7 or PMSAv7 */ asm("mrc p15, 0, %0, c0, c1, 4" : "=r" (mmfr0)); - if ((mmfr0 & 0x0000000f) == 0x00000003 || - (mmfr0 & 0x000000f0) == 0x00000030) + if ((mmfr0 & 0x0000000f) >= 0x00000003 || + (mmfr0 & 0x000000f0) >= 0x00000030) cpu_arch = CPU_ARCH_ARMv7; else if ((mmfr0 & 0x0000000f) == 0x00000002 || (mmfr0 & 0x000000f0) == 0x00000020) diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 907d5a620bca..abaf8445ce25 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -474,7 +474,9 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka, unsigned long handler = (unsigned long)ka->sa.sa_handler; unsigned long retcode; int thumb = 0; - unsigned long cpsr = regs->ARM_cpsr & ~PSR_f; + unsigned long cpsr = regs->ARM_cpsr & ~(PSR_f | PSR_E_BIT); + + cpsr |= PSR_ENDSTATE; /* * Maybe we need to deliver a 32-bit signal to a 26-bit task. diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 86b66f3f2031..61462790757f 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -21,6 +21,12 @@ #define ARM_CPU_KEEP(x) #endif +#if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK) +#define ARM_EXIT_KEEP(x) x +#else +#define ARM_EXIT_KEEP(x) +#endif + OUTPUT_ARCH(arm) ENTRY(stext) @@ -43,6 +49,7 @@ SECTIONS _sinittext = .; HEAD_TEXT INIT_TEXT + ARM_EXIT_KEEP(EXIT_TEXT) _einittext = .; ARM_CPU_DISCARD(PROC_INFO) __arch_info_begin = .; @@ -67,6 +74,7 @@ SECTIONS #ifndef CONFIG_XIP_KERNEL __init_begin = _stext; INIT_DATA + ARM_EXIT_KEEP(EXIT_DATA) #endif } @@ -162,6 +170,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_begin = .; INIT_DATA + ARM_EXIT_KEEP(EXIT_DATA) . = ALIGN(PAGE_SIZE); __init_end = .; #endif @@ -247,6 +256,8 @@ SECTIONS } #endif + NOTES + BSS_SECTION(0, 0, 0) _end = .; diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index ffdf87be2958..82079545adc4 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -838,7 +838,7 @@ EXPORT_SYMBOL(ep93xx_i2s_release); static struct resource ep93xx_ac97_resources[] = { { .start = EP93XX_AAC_PHYS_BASE, - .end = EP93XX_AAC_PHYS_BASE + 0xb0 - 1, + .end = EP93XX_AAC_PHYS_BASE + 0xac - 1, .flags = IORESOURCE_MEM, }, { diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index aa76cfd9f348..8382e7902078 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -180,7 +180,7 @@ static const uint32_t mx25pdk_keymap[] = { KEY(3, 3, KEY_POWER), }; -static const struct matrix_keymap_data mx25pdk_keymap_data __initdata = { +static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = { .keymap = mx25pdk_keymap, .keymap_size = ARRAY_SIZE(mx25pdk_keymap), }; diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 4dc68d6bb6be..9fd894271d5d 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -432,7 +432,7 @@ static struct clocksource clocksource_ixp4xx = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -unsigned long ixp4xx_timer_freq = FREQ; +unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; EXPORT_SYMBOL(ixp4xx_timer_freq); static void __init ixp4xx_clocksource_init(void) { @@ -496,7 +496,7 @@ static struct clock_event_device clockevent_ixp4xx = { static void __init ixp4xx_clockevent_init(void) { - clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC, + clockevent_ixp4xx.mult = div_sc(IXP4XX_TIMER_FREQ, NSEC_PER_SEC, clockevent_ixp4xx.shift); clockevent_ixp4xx.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx); diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h index 2c3f93c3eb79..c9e930f29339 100644 --- a/arch/arm/mach-ixp4xx/include/mach/timex.h +++ b/arch/arm/mach-ixp4xx/include/mach/timex.h @@ -10,6 +10,7 @@ * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the * timer register ignores the bottom 2 bits of the LATCH value. */ -#define FREQ 66666000 -#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) +#define IXP4XX_TIMER_FREQ 66666000 +#define CLOCK_TICK_RATE \ + (((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index bfdbe4b5a3cc..852f7c9f87d0 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -265,6 +265,11 @@ void qmgr_release_queue(unsigned int queue) qmgr_queue_descs[queue], queue); qmgr_queue_descs[queue][0] = '\x0'; #endif + + while ((addr = qmgr_get_entry(queue))) + printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n", + queue, addr); + __raw_writel(0, &qmgr_regs->sram[queue]); used_sram_bitmap[0] &= ~mask[0]; @@ -275,10 +280,6 @@ void qmgr_release_queue(unsigned int queue) spin_unlock_irq(&qmgr_lock); module_put(THIS_MODULE); - - while ((addr = qmgr_get_entry(queue))) - printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n", - queue, addr); } static int qmgr_init(void) diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c index b1a362ebfded..ca72a05ed9c1 100644 --- a/arch/arm/mach-mxs/clock-mx23.c +++ b/arch/arm/mach-mxs/clock-mx23.c @@ -304,7 +304,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ reg &= ~BM_CLKCTRL_##dr##_DIV; \ reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg | (1 << clk->enable_shift)) { \ + if (reg & (1 << clk->enable_shift)) { \ pr_err("%s: clock is gated\n", __func__); \ return -EINVAL; \ } \ @@ -347,7 +347,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent) \ { \ if (parent != clk->parent) { \ __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ - HW_CLKCTRL_CLKSEQ_TOG); \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \ clk->parent = parent; \ } \ \ diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c index 56312c092a9e..fd1c4c54b8e5 100644 --- a/arch/arm/mach-mxs/clock-mx28.c +++ b/arch/arm/mach-mxs/clock-mx28.c @@ -355,12 +355,12 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \ } else { \ reg &= ~BM_CLKCTRL_##dr##_DIV; \ reg |= div << BP_CLKCTRL_##dr##_DIV; \ - if (reg | (1 << clk->enable_shift)) { \ + if (reg & (1 << clk->enable_shift)) { \ pr_err("%s: clock is gated\n", __func__); \ return -EINVAL; \ } \ } \ - __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU); \ + __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \ \ for (i = 10000; i; i--) \ if (!(__raw_readl(CLKCTRL_BASE_ADDR + \ @@ -483,7 +483,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent) \ { \ if (parent != clk->parent) { \ __raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit, \ - HW_CLKCTRL_CLKSEQ_TOG); \ + CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG); \ clk->parent = parent; \ } \ \ @@ -609,7 +609,6 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("duart", NULL, uart_clk) _REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk) _REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK("rtc", NULL, rtc_clk) _REGISTER_CLOCK("pll2", NULL, pll2_clk) _REGISTER_CLOCK(NULL, "hclk", hbus_clk) diff --git a/arch/arm/mach-mxs/clock.c b/arch/arm/mach-mxs/clock.c index e7d2269cf70e..a7093c88e6a6 100644 --- a/arch/arm/mach-mxs/clock.c +++ b/arch/arm/mach-mxs/clock.c @@ -57,7 +57,6 @@ static void __clk_disable(struct clk *clk) if (clk->disable) clk->disable(clk); __clk_disable(clk->parent); - __clk_disable(clk->secondary); } } @@ -68,7 +67,6 @@ static int __clk_enable(struct clk *clk) if (clk->usecount++ == 0) { __clk_enable(clk->parent); - __clk_enable(clk->secondary); if (clk->enable) clk->enable(clk); diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c index d7ad7a61366d..cb0c0e83a527 100644 --- a/arch/arm/mach-mxs/gpio.c +++ b/arch/arm/mach-mxs/gpio.c @@ -139,6 +139,8 @@ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) struct mxs_gpio_port *port = (struct mxs_gpio_port *)get_irq_data(irq); u32 gpio_irq_no_base = port->virtual_irq_start; + desc->irq_data.chip->irq_ack(&desc->irq_data); + irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) & __raw_readl(port->base + PINCTRL_IRQEN(port->id)); diff --git a/arch/arm/mach-mxs/include/mach/clock.h b/arch/arm/mach-mxs/include/mach/clock.h index 041e276d8a32..592c9ab5d760 100644 --- a/arch/arm/mach-mxs/include/mach/clock.h +++ b/arch/arm/mach-mxs/include/mach/clock.h @@ -29,8 +29,6 @@ struct clk { int id; /* Source clock this clk depends on */ struct clk *parent; - /* Secondary clock to enable/disable with this clock */ - struct clk *secondary; /* Reference count of clock enable/disable */ __s8 usecount; /* Register bit position for clock's enable/disable control. */ diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index c9088d85da04..453809359ba6 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -37,7 +37,7 @@ int omap_lcd_dma_running(void) * On OMAP1510, internal LCD controller will start the transfer * when it gets enabled, so assume DMA running if LCD enabled. */ - if (cpu_is_omap1510()) + if (cpu_is_omap15xx()) if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN) return 1; @@ -95,7 +95,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); void omap_set_lcd_dma_b1_rotation(int rotate) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); BUG(); return; @@ -106,7 +106,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); void omap_set_lcd_dma_b1_mirror(int mirror) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); BUG(); } @@ -116,7 +116,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); void omap_set_lcd_dma_b1_vxres(unsigned long vxres) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA virtual resulotion is not supported " "in 1510 mode\n"); BUG(); @@ -127,7 +127,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) { - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); BUG(); } @@ -177,7 +177,7 @@ static void set_b1_regs(void) bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); /* 1510 DMA requires the bottom address to be 2 more * than the actual last memory access location. */ - if (cpu_is_omap1510() && + if (cpu_is_omap15xx() && lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) bottom += 2; ei = PIXSTEP(0, 0, 1, 0); @@ -241,7 +241,7 @@ static void set_b1_regs(void) return; /* Suppress warning about uninitialized vars */ } - if (cpu_is_omap1510()) { + if (cpu_is_omap15xx()) { omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); @@ -343,7 +343,7 @@ void omap_free_lcd_dma(void) BUG(); return; } - if (!cpu_is_omap1510()) + if (!cpu_is_omap15xx()) omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, OMAP1610_DMA_LCD_CCR); lcd_dma.reserved = 0; @@ -360,7 +360,7 @@ void omap_enable_lcd_dma(void) * connected. Otherwise the OMAP internal controller will * start the transfer when it gets enabled. */ - if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl) return; w = omap_readw(OMAP1610_DMA_LCD_CTRL); @@ -378,14 +378,14 @@ EXPORT_SYMBOL(omap_enable_lcd_dma); void omap_setup_lcd_dma(void) { BUG_ON(lcd_dma.active); - if (!cpu_is_omap1510()) { + if (!cpu_is_omap15xx()) { /* Set some reasonable defaults */ omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); } set_b1_regs(); - if (!cpu_is_omap1510()) { + if (!cpu_is_omap15xx()) { u16 w; w = omap_readw(OMAP1610_DMA_LCD_CCR); @@ -407,7 +407,7 @@ void omap_stop_lcd_dma(void) u16 w; lcd_dma.active = 0; - if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl) return; w = omap_readw(OMAP1610_DMA_LCD_CCR); diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index f83fc335c613..6885d2fac183 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -44,7 +44,6 @@ #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/io.h> -#include <linux/sched.h> #include <asm/system.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index e906e05bb41b..9a2a31e011ce 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -115,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = { static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) { - twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1); - twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0); - if (gpio_is_valid(dssdev->reset_gpio)) gpio_set_value_cansleep(dssdev->reset_gpio, 1); return 0; @@ -247,6 +244,8 @@ static struct gpio_led gpio_leds[]; static int devkit8000_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret; + omap_mux_init_gpio(29, OMAP_PIN_INPUT); /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; @@ -255,17 +254,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - /* gpio + 1 is "LCD_PWREN" (out, active high) */ - devkit8000_lcd_device.reset_gpio = gpio + 1; - gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN"); - /* Disable until needed */ - gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0); + /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ + devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; + ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN"); + if (ret < 0) { + devkit8000_lcd_device.reset_gpio = -EINVAL; + printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); + } /* gpio + 7 is "DVI_PD" (out, active low) */ devkit8000_dvi_device.reset_gpio = gpio + 7; - gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown"); - /* Disable until needed */ - gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0); + ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown"); + if (ret < 0) { + devkit8000_dvi_device.reset_gpio = -EINVAL; + printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); + } return 0; } diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e001a048dc0c..e944025d5ef8 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -409,8 +409,6 @@ static void __init omap4_panda_init(void) platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); - /* OMAP4 Panda uses internal transceiver so register nop transceiver */ - usb_nop_xceiv_register(); omap4_ehci_init(); usb_musb_init(&musb_board_data); } diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index cb77be7ac44f..39a71bb8a308 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -40,9 +40,6 @@ static struct regulator_consumer_supply rm680_vemmc_consumers[] = { static struct regulator_init_data rm680_vemmc = { .constraints = { .name = "rm680_vemmc", - .min_uV = 2900000, - .max_uV = 2900000, - .apply_uV = 1, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_STATUS diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index fae49d12bc76..98148b6c36e9 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -1000,6 +1000,7 @@ int __init omap_mux_init(const char *name, u32 flags, if (!partition->base) { pr_err("%s: Could not ioremap mux partition at 0x%08x\n", __func__, partition->phys); + kfree(partition); return -ENODEV; } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index a4aa1920a75c..2f864e4b085d 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -168,9 +168,10 @@ static void omap3_core_restore_context(void) * once during boot sequence, but this works as we are not using secure * services. */ -static void omap3_save_secure_ram_context(u32 target_mpu_state) +static void omap3_save_secure_ram_context(void) { u32 ret; + int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); if (omap_type() != OMAP2_DEVICE_TYPE_GP) { /* @@ -181,7 +182,7 @@ static void omap3_save_secure_ram_context(u32 target_mpu_state) pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); ret = _omap_save_secure_sram((u32 *) __pa(omap3_secure_ram_storage)); - pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state); + pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ if (ret) { printk(KERN_ERR "save_secure_sram() returns %08x\n", @@ -1094,7 +1095,7 @@ static int __init omap3_pm_init(void) local_fiq_disable(); omap_dma_global_context_save(); - omap3_save_secure_ram_context(PWRDM_POWER_ON); + omap3_save_secure_ram_context(); omap_dma_global_context_restore(); local_irq_enable(); diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 77ecebf3fae2..c37e823266d3 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -780,8 +780,7 @@ static int omap_sr_autocomp_show(void *data, u64 *val) struct omap_sr *sr_info = (struct omap_sr *) data; if (!sr_info) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, sr_info->voltdm->name); + pr_warning("%s: omap_sr struct not found\n", __func__); return -EINVAL; } @@ -795,8 +794,7 @@ static int omap_sr_autocomp_store(void *data, u64 val) struct omap_sr *sr_info = (struct omap_sr *) data; if (!sr_info) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, sr_info->voltdm->name); + pr_warning("%s: omap_sr struct not found\n", __func__); return -EINVAL; } @@ -834,7 +832,8 @@ static int __init omap_sr_probe(struct platform_device *pdev) if (!pdata) { dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - return -EINVAL; + ret = -EINVAL; + goto err_free_devinfo; } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -966,7 +965,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev) } sr_info = _sr_lookup(pdata->voltdm); - if (!sr_info) { + if (IS_ERR(sr_info)) { dev_warn(&pdev->dev, "%s: omap_sr struct not found\n", __func__); return -EINVAL; diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index ed6079c94c57..12be525b8df4 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -471,6 +471,7 @@ static void __init vdd_debugfs_init(struct omap_vdd_info *vdd) strcat(name, vdd->voltdm.name); vdd->debug_dir = debugfs_create_dir(name, voltage_dir); + kfree(name); if (IS_ERR(vdd->debug_dir)) { pr_warning("%s: Unable to create debugfs directory for" " vdd_%s\n", __func__, vdd->voltdm.name); diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index 6b2c800a1133..28f667e52ef9 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -50,7 +50,7 @@ static void __init colibri_mmc_init(void) GPIO0_COLIBRI_PXA270_SD_DETECT; if (machine_is_colibri300()) /* PXA300 Colibri */ colibri_mci_platform_data.gpio_card_detect = - GPIO39_COLIBRI_PXA300_SD_DETECT; + GPIO13_COLIBRI_PXA300_SD_DETECT; else /* PXA320 Colibri */ colibri_mci_platform_data.gpio_card_detect = GPIO28_COLIBRI_PXA320_SD_DETECT; diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index fddb16d07eb0..66dd81cbc8a0 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -41,7 +41,7 @@ static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = { GPIO4_MMC1_DAT1, GPIO5_MMC1_DAT2, GPIO6_MMC1_DAT3, - GPIO39_GPIO, /* SD detect */ + GPIO13_GPIO, /* GPIO13_COLIBRI_PXA300_SD_DETECT */ /* UHC */ GPIO0_2_USBH_PEN, diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 388a96f1ef93..cb4236e98a0f 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -60,7 +60,7 @@ static inline void colibri_pxa3xx_init_nand(void) {} #define GPIO113_COLIBRI_PXA270_TS_IRQ 113 /* GPIO definitions for Colibri PXA300/310 */ -#define GPIO39_COLIBRI_PXA300_SD_DETECT 39 +#define GPIO13_COLIBRI_PXA300_SD_DETECT 13 /* GPIO definitions for Colibri PXA320 */ #define GPIO28_COLIBRI_PXA320_SD_DETECT 28 diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 405b92a29793..35572c427fa8 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -323,7 +323,7 @@ static struct platform_pwm_backlight_data palm27x_backlight_data = { .pwm_id = 0, .max_brightness = 0xfe, .dft_brightness = 0x7e, - .pwm_period_ns = 3500, + .pwm_period_ns = 3500 * 1024, .init = palm27x_backlight_init, .notify = palm27x_backlight_notify, .exit = palm27x_backlight_exit, diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 978e1b289544..1807c9abdde0 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -33,7 +33,7 @@ int pxa_pm_enter(suspend_state_t state) #endif /* skip registers saving for standby */ - if (state != PM_SUSPEND_STANDBY) { + if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->save) { pxa_cpu_pm_fns->save(sleep_save); /* before sleeping, calculate and save a checksum */ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++) @@ -44,7 +44,7 @@ int pxa_pm_enter(suspend_state_t state) pxa_cpu_pm_fns->enter(state); cpu_init(); - if (state != PM_SUSPEND_STANDBY) { + if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) { /* after sleeping, validate the checksum */ for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++) checksum += sleep_save[i]; diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h index 203dd5a18bd5..058dab4482a1 100644 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ b/arch/arm/mach-s5p6442/include/mach/map.h @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s5p6442/include/mach/map.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * S5P6442 - Memory map definitions @@ -16,56 +16,61 @@ #include <plat/map-base.h> #include <plat/map-s5p.h> -#define S5P6442_PA_CHIPID (0xE0000000) -#define S5P_PA_CHIPID S5P6442_PA_CHIPID +#define S5P6442_PA_SDRAM 0x20000000 -#define S5P6442_PA_SYSCON (0xE0100000) -#define S5P_PA_SYSCON S5P6442_PA_SYSCON +#define S5P6442_PA_I2S0 0xC0B00000 +#define S5P6442_PA_I2S1 0xF2200000 -#define S5P6442_PA_GPIO (0xE0200000) +#define S5P6442_PA_CHIPID 0xE0000000 -#define S5P6442_PA_VIC0 (0xE4000000) -#define S5P6442_PA_VIC1 (0xE4100000) -#define S5P6442_PA_VIC2 (0xE4200000) +#define S5P6442_PA_SYSCON 0xE0100000 -#define S5P6442_PA_SROMC (0xE7000000) -#define S5P_PA_SROMC S5P6442_PA_SROMC +#define S5P6442_PA_GPIO 0xE0200000 -#define S5P6442_PA_MDMA 0xE8000000 -#define S5P6442_PA_PDMA 0xE9000000 +#define S5P6442_PA_VIC0 0xE4000000 +#define S5P6442_PA_VIC1 0xE4100000 +#define S5P6442_PA_VIC2 0xE4200000 -#define S5P6442_PA_TIMER (0xEA000000) -#define S5P_PA_TIMER S5P6442_PA_TIMER +#define S5P6442_PA_SROMC 0xE7000000 -#define S5P6442_PA_SYSTIMER (0xEA100000) +#define S5P6442_PA_MDMA 0xE8000000 +#define S5P6442_PA_PDMA 0xE9000000 -#define S5P6442_PA_WATCHDOG (0xEA200000) +#define S5P6442_PA_TIMER 0xEA000000 -#define S5P6442_PA_UART (0xEC000000) +#define S5P6442_PA_SYSTIMER 0xEA100000 -#define S5P_PA_UART0 (S5P6442_PA_UART + 0x0) -#define S5P_PA_UART1 (S5P6442_PA_UART + 0x400) -#define S5P_PA_UART2 (S5P6442_PA_UART + 0x800) -#define S5P_SZ_UART SZ_256 +#define S5P6442_PA_WATCHDOG 0xEA200000 -#define S5P6442_PA_IIC0 (0xEC100000) +#define S5P6442_PA_UART 0xEC000000 -#define S5P6442_PA_SDRAM (0x20000000) -#define S5P_PA_SDRAM S5P6442_PA_SDRAM +#define S5P6442_PA_IIC0 0xEC100000 #define S5P6442_PA_SPI 0xEC300000 -/* I2S */ -#define S5P6442_PA_I2S0 0xC0B00000 -#define S5P6442_PA_I2S1 0xF2200000 - -/* PCM */ #define S5P6442_PA_PCM0 0xF2400000 #define S5P6442_PA_PCM1 0xF2500000 -/* compatibiltiy defines. */ +/* Compatibiltiy Defines */ + +#define S3C_PA_IIC S5P6442_PA_IIC0 #define S3C_PA_WDT S5P6442_PA_WATCHDOG + +#define S5P_PA_CHIPID S5P6442_PA_CHIPID +#define S5P_PA_SDRAM S5P6442_PA_SDRAM +#define S5P_PA_SROMC S5P6442_PA_SROMC +#define S5P_PA_SYSCON S5P6442_PA_SYSCON +#define S5P_PA_TIMER S5P6442_PA_TIMER + +/* UART */ + #define S3C_PA_UART S5P6442_PA_UART -#define S3C_PA_IIC S5P6442_PA_IIC0 + +#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) + +#define S5P_SZ_UART SZ_256 #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h index a9365e5ba614..95c91257c7ca 100644 --- a/arch/arm/mach-s5p64x0/include/mach/map.h +++ b/arch/arm/mach-s5p64x0/include/mach/map.h @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s5p64x0/include/mach/map.h * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * * S5P64X0 - Memory map definitions @@ -16,64 +16,46 @@ #include <plat/map-base.h> #include <plat/map-s5p.h> -#define S5P64X0_PA_SDRAM (0x20000000) +#define S5P64X0_PA_SDRAM 0x20000000 -#define S5P64X0_PA_CHIPID (0xE0000000) -#define S5P_PA_CHIPID S5P64X0_PA_CHIPID - -#define S5P64X0_PA_SYSCON (0xE0100000) -#define S5P_PA_SYSCON S5P64X0_PA_SYSCON - -#define S5P64X0_PA_GPIO (0xE0308000) - -#define S5P64X0_PA_VIC0 (0xE4000000) -#define S5P64X0_PA_VIC1 (0xE4100000) +#define S5P64X0_PA_CHIPID 0xE0000000 -#define S5P64X0_PA_SROMC (0xE7000000) -#define S5P_PA_SROMC S5P64X0_PA_SROMC - -#define S5P64X0_PA_PDMA (0xE9000000) - -#define S5P64X0_PA_TIMER (0xEA000000) -#define S5P_PA_TIMER S5P64X0_PA_TIMER +#define S5P64X0_PA_SYSCON 0xE0100000 -#define S5P64X0_PA_RTC (0xEA100000) +#define S5P64X0_PA_GPIO 0xE0308000 -#define S5P64X0_PA_WDT (0xEA200000) +#define S5P64X0_PA_VIC0 0xE4000000 +#define S5P64X0_PA_VIC1 0xE4100000 -#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET)) -#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000)) +#define S5P64X0_PA_SROMC 0xE7000000 -#define S5P_PA_UART0 S5P6450_PA_UART(0) -#define S5P_PA_UART1 S5P6450_PA_UART(1) -#define S5P_PA_UART2 S5P6450_PA_UART(2) -#define S5P_PA_UART3 S5P6450_PA_UART(3) -#define S5P_PA_UART4 S5P6450_PA_UART(4) -#define S5P_PA_UART5 S5P6450_PA_UART(5) +#define S5P64X0_PA_PDMA 0xE9000000 -#define S5P_SZ_UART SZ_256 +#define S5P64X0_PA_TIMER 0xEA000000 +#define S5P64X0_PA_RTC 0xEA100000 +#define S5P64X0_PA_WDT 0xEA200000 -#define S5P6440_PA_IIC0 (0xEC104000) -#define S5P6440_PA_IIC1 (0xEC20F000) -#define S5P6450_PA_IIC0 (0xEC100000) -#define S5P6450_PA_IIC1 (0xEC200000) +#define S5P6440_PA_IIC0 0xEC104000 +#define S5P6440_PA_IIC1 0xEC20F000 +#define S5P6450_PA_IIC0 0xEC100000 +#define S5P6450_PA_IIC1 0xEC200000 -#define S5P64X0_PA_SPI0 (0xEC400000) -#define S5P64X0_PA_SPI1 (0xEC500000) +#define S5P64X0_PA_SPI0 0xEC400000 +#define S5P64X0_PA_SPI1 0xEC500000 -#define S5P64X0_PA_HSOTG (0xED100000) +#define S5P64X0_PA_HSOTG 0xED100000 #define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) -#define S5P64X0_PA_I2S (0xF2000000) +#define S5P64X0_PA_I2S 0xF2000000 #define S5P6450_PA_I2S1 0xF2800000 #define S5P6450_PA_I2S2 0xF2900000 -#define S5P64X0_PA_PCM (0xF2100000) +#define S5P64X0_PA_PCM 0xF2100000 -#define S5P64X0_PA_ADC (0xF3000000) +#define S5P64X0_PA_ADC 0xF3000000 -/* compatibiltiy defines. */ +/* Compatibiltiy Defines */ #define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0) #define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1) @@ -83,6 +65,25 @@ #define S3C_PA_RTC S5P64X0_PA_RTC #define S3C_PA_WDT S5P64X0_PA_WDT +#define S5P_PA_CHIPID S5P64X0_PA_CHIPID +#define S5P_PA_SROMC S5P64X0_PA_SROMC +#define S5P_PA_SYSCON S5P64X0_PA_SYSCON +#define S5P_PA_TIMER S5P64X0_PA_TIMER + #define SAMSUNG_PA_ADC S5P64X0_PA_ADC +/* UART */ + +#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET)) +#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000)) + +#define S5P_PA_UART0 S5P6450_PA_UART(0) +#define S5P_PA_UART1 S5P6450_PA_UART(1) +#define S5P_PA_UART2 S5P6450_PA_UART(2) +#define S5P_PA_UART3 S5P6450_PA_UART(3) +#define S5P_PA_UART4 S5P6450_PA_UART(4) +#define S5P_PA_UART5 S5P6450_PA_UART(5) + +#define S5P_SZ_UART SZ_256 + #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index 328467b346aa..ccbe6b767f7d 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -1,5 +1,8 @@ /* linux/arch/arm/mach-s5pc100/include/mach/map.h * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * * Copyright 2009 Samsung Electronics Co. * Byungho Min <bhmin@samsung.com> * @@ -16,145 +19,115 @@ #include <plat/map-base.h> #include <plat/map-s5p.h> -/* - * map-base.h has already defined virtual memory address - * S3C_VA_IRQ S3C_ADDR(0x00000000) irq controller(s) - * S3C_VA_SYS S3C_ADDR(0x00100000) system control - * S3C_VA_MEM S3C_ADDR(0x00200000) system control (not used) - * S3C_VA_TIMER S3C_ADDR(0x00300000) timer block - * S3C_VA_WATCHDOG S3C_ADDR(0x00400000) watchdog - * S3C_VA_UART S3C_ADDR(0x01000000) UART - * - * S5PC100 specific virtual memory address can be defined here - * S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) GPIO - * - */ +#define S5PC100_PA_SDRAM 0x20000000 + +#define S5PC100_PA_ONENAND 0xE7100000 +#define S5PC100_PA_ONENAND_BUF 0xB0000000 + +#define S5PC100_PA_CHIPID 0xE0000000 -#define S5PC100_PA_ONENAND_BUF (0xB0000000) -#define S5PC100_SZ_ONENAND_BUF (SZ_256M - SZ_32M) +#define S5PC100_PA_SYSCON 0xE0100000 -/* Chip ID */ +#define S5PC100_PA_OTHERS 0xE0200000 -#define S5PC100_PA_CHIPID (0xE0000000) -#define S5P_PA_CHIPID S5PC100_PA_CHIPID +#define S5PC100_PA_GPIO 0xE0300000 -#define S5PC100_PA_SYSCON (0xE0100000) -#define S5P_PA_SYSCON S5PC100_PA_SYSCON +#define S5PC100_PA_VIC0 0xE4000000 +#define S5PC100_PA_VIC1 0xE4100000 +#define S5PC100_PA_VIC2 0xE4200000 -#define S5PC100_PA_OTHERS (0xE0200000) -#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000) +#define S5PC100_PA_SROMC 0xE7000000 -#define S5PC100_PA_GPIO (0xE0300000) -#define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) +#define S5PC100_PA_CFCON 0xE7800000 -/* Interrupt */ -#define S5PC100_PA_VIC0 (0xE4000000) -#define S5PC100_PA_VIC1 (0xE4100000) -#define S5PC100_PA_VIC2 (0xE4200000) -#define S5PC100_VA_VIC S3C_VA_IRQ -#define S5PC100_VA_VIC_OFFSET 0x10000 -#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) +#define S5PC100_PA_MDMA 0xE8100000 +#define S5PC100_PA_PDMA0 0xE9000000 +#define S5PC100_PA_PDMA1 0xE9200000 -#define S5PC100_PA_SROMC (0xE7000000) -#define S5P_PA_SROMC S5PC100_PA_SROMC +#define S5PC100_PA_TIMER 0xEA000000 +#define S5PC100_PA_SYSTIMER 0xEA100000 +#define S5PC100_PA_WATCHDOG 0xEA200000 +#define S5PC100_PA_RTC 0xEA300000 -#define S5PC100_PA_ONENAND (0xE7100000) +#define S5PC100_PA_UART 0xEC000000 -#define S5PC100_PA_CFCON (0xE7800000) +#define S5PC100_PA_IIC0 0xEC100000 +#define S5PC100_PA_IIC1 0xEC200000 -/* DMA */ -#define S5PC100_PA_MDMA (0xE8100000) -#define S5PC100_PA_PDMA0 (0xE9000000) -#define S5PC100_PA_PDMA1 (0xE9200000) +#define S5PC100_PA_SPI0 0xEC300000 +#define S5PC100_PA_SPI1 0xEC400000 +#define S5PC100_PA_SPI2 0xEC500000 -/* Timer */ -#define S5PC100_PA_TIMER (0xEA000000) -#define S5P_PA_TIMER S5PC100_PA_TIMER +#define S5PC100_PA_USB_HSOTG 0xED200000 +#define S5PC100_PA_USB_HSPHY 0xED300000 -#define S5PC100_PA_SYSTIMER (0xEA100000) +#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) -#define S5PC100_PA_WATCHDOG (0xEA200000) -#define S5PC100_PA_RTC (0xEA300000) +#define S5PC100_PA_FB 0xEE000000 -#define S5PC100_PA_UART (0xEC000000) +#define S5PC100_PA_FIMC0 0xEE200000 +#define S5PC100_PA_FIMC1 0xEE300000 +#define S5PC100_PA_FIMC2 0xEE400000 -#define S5P_PA_UART0 (S5PC100_PA_UART + 0x0) -#define S5P_PA_UART1 (S5PC100_PA_UART + 0x400) -#define S5P_PA_UART2 (S5PC100_PA_UART + 0x800) -#define S5P_PA_UART3 (S5PC100_PA_UART + 0xC00) -#define S5P_SZ_UART SZ_256 +#define S5PC100_PA_I2S0 0xF2000000 +#define S5PC100_PA_I2S1 0xF2100000 +#define S5PC100_PA_I2S2 0xF2200000 -#define S5PC100_PA_IIC0 (0xEC100000) -#define S5PC100_PA_IIC1 (0xEC200000) +#define S5PC100_PA_AC97 0xF2300000 -/* SPI */ -#define S5PC100_PA_SPI0 0xEC300000 -#define S5PC100_PA_SPI1 0xEC400000 -#define S5PC100_PA_SPI2 0xEC500000 +#define S5PC100_PA_PCM0 0xF2400000 +#define S5PC100_PA_PCM1 0xF2500000 -/* USB HS OTG */ -#define S5PC100_PA_USB_HSOTG (0xED200000) -#define S5PC100_PA_USB_HSPHY (0xED300000) +#define S5PC100_PA_SPDIF 0xF2600000 -#define S5PC100_PA_FB (0xEE000000) +#define S5PC100_PA_TSADC 0xF3000000 -#define S5PC100_PA_FIMC0 (0xEE200000) -#define S5PC100_PA_FIMC1 (0xEE300000) -#define S5PC100_PA_FIMC2 (0xEE400000) +#define S5PC100_PA_KEYPAD 0xF3100000 -#define S5PC100_PA_I2S0 (0xF2000000) -#define S5PC100_PA_I2S1 (0xF2100000) -#define S5PC100_PA_I2S2 (0xF2200000) +/* Compatibiltiy Defines */ -#define S5PC100_PA_AC97 0xF2300000 +#define S3C_PA_FB S5PC100_PA_FB +#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2) +#define S3C_PA_IIC S5PC100_PA_IIC0 +#define S3C_PA_IIC1 S5PC100_PA_IIC1 +#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD +#define S3C_PA_ONENAND S5PC100_PA_ONENAND +#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF +#define S3C_PA_RTC S5PC100_PA_RTC +#define S3C_PA_TSADC S5PC100_PA_TSADC +#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG +#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY +#define S3C_PA_WDT S5PC100_PA_WATCHDOG -/* PCM */ -#define S5PC100_PA_PCM0 0xF2400000 -#define S5PC100_PA_PCM1 0xF2500000 +#define S5P_PA_CHIPID S5PC100_PA_CHIPID +#define S5P_PA_FIMC0 S5PC100_PA_FIMC0 +#define S5P_PA_FIMC1 S5PC100_PA_FIMC1 +#define S5P_PA_FIMC2 S5PC100_PA_FIMC2 +#define S5P_PA_SDRAM S5PC100_PA_SDRAM +#define S5P_PA_SROMC S5PC100_PA_SROMC +#define S5P_PA_SYSCON S5PC100_PA_SYSCON +#define S5P_PA_TIMER S5PC100_PA_TIMER -#define S5PC100_PA_SPDIF 0xF2600000 +#define SAMSUNG_PA_ADC S5PC100_PA_TSADC +#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON +#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD -#define S5PC100_PA_TSADC (0xF3000000) +#define S5PC100_VA_OTHERS (S3C_VA_SYS + 0x10000) -/* KEYPAD */ -#define S5PC100_PA_KEYPAD (0xF3100000) +#define S3C_SZ_ONENAND_BUF (SZ_256M - SZ_32M) -#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) +/* UART */ -#define S5PC100_PA_SDRAM (0x20000000) -#define S5P_PA_SDRAM S5PC100_PA_SDRAM +#define S3C_PA_UART S5PC100_PA_UART -/* compatibiltiy defines. */ -#define S3C_PA_UART S5PC100_PA_UART -#define S3C_PA_IIC S5PC100_PA_IIC0 -#define S3C_PA_IIC1 S5PC100_PA_IIC1 -#define S3C_PA_FB S5PC100_PA_FB -#define S3C_PA_G2D S5PC100_PA_G2D -#define S3C_PA_G3D S5PC100_PA_G3D -#define S3C_PA_JPEG S5PC100_PA_JPEG -#define S3C_PA_ROTATOR S5PC100_PA_ROTATOR -#define S5P_VA_VIC0 S5PC1XX_VA_VIC(0) -#define S5P_VA_VIC1 S5PC1XX_VA_VIC(1) -#define S5P_VA_VIC2 S5PC1XX_VA_VIC(2) -#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG -#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY -#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC(0) -#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1) -#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2) -#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD -#define S3C_PA_WDT S5PC100_PA_WATCHDOG -#define S3C_PA_TSADC S5PC100_PA_TSADC -#define S3C_PA_ONENAND S5PC100_PA_ONENAND -#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF -#define S3C_SZ_ONENAND_BUF S5PC100_SZ_ONENAND_BUF -#define S3C_PA_RTC S5PC100_PA_RTC - -#define SAMSUNG_PA_ADC S5PC100_PA_TSADC -#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON -#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD +#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) +#define S5P_PA_UART3 S5P_PA_UART(3) -#define S5P_PA_FIMC0 S5PC100_PA_FIMC0 -#define S5P_PA_FIMC1 S5PC100_PA_FIMC1 -#define S5P_PA_FIMC2 S5PC100_PA_FIMC2 +#define S5P_SZ_UART SZ_256 -#endif /* __ASM_ARCH_C100_MAP_H */ +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 3611492ad681..1dd58836fd4f 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s5pv210/include/mach/map.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * S5PV210 - Memory map definitions @@ -16,122 +16,120 @@ #include <plat/map-base.h> #include <plat/map-s5p.h> -#define S5PV210_PA_SROM_BANK5 (0xA8000000) +#define S5PV210_PA_SDRAM 0x20000000 -#define S5PC110_PA_ONENAND (0xB0000000) -#define S5P_PA_ONENAND S5PC110_PA_ONENAND +#define S5PV210_PA_SROM_BANK5 0xA8000000 -#define S5PC110_PA_ONENAND_DMA (0xB0600000) -#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA +#define S5PC110_PA_ONENAND 0xB0000000 +#define S5PC110_PA_ONENAND_DMA 0xB0600000 -#define S5PV210_PA_CHIPID (0xE0000000) -#define S5P_PA_CHIPID S5PV210_PA_CHIPID +#define S5PV210_PA_CHIPID 0xE0000000 -#define S5PV210_PA_SYSCON (0xE0100000) -#define S5P_PA_SYSCON S5PV210_PA_SYSCON +#define S5PV210_PA_SYSCON 0xE0100000 -#define S5PV210_PA_GPIO (0xE0200000) +#define S5PV210_PA_GPIO 0xE0200000 -/* SPI */ -#define S5PV210_PA_SPI0 0xE1300000 -#define S5PV210_PA_SPI1 0xE1400000 +#define S5PV210_PA_SPDIF 0xE1100000 -#define S5PV210_PA_KEYPAD (0xE1600000) +#define S5PV210_PA_SPI0 0xE1300000 +#define S5PV210_PA_SPI1 0xE1400000 -#define S5PV210_PA_IIC0 (0xE1800000) -#define S5PV210_PA_IIC1 (0xFAB00000) -#define S5PV210_PA_IIC2 (0xE1A00000) +#define S5PV210_PA_KEYPAD 0xE1600000 -#define S5PV210_PA_TIMER (0xE2500000) -#define S5P_PA_TIMER S5PV210_PA_TIMER +#define S5PV210_PA_ADC 0xE1700000 -#define S5PV210_PA_SYSTIMER (0xE2600000) +#define S5PV210_PA_IIC0 0xE1800000 +#define S5PV210_PA_IIC1 0xFAB00000 +#define S5PV210_PA_IIC2 0xE1A00000 -#define S5PV210_PA_WATCHDOG (0xE2700000) +#define S5PV210_PA_AC97 0xE2200000 -#define S5PV210_PA_RTC (0xE2800000) -#define S5PV210_PA_UART (0xE2900000) +#define S5PV210_PA_PCM0 0xE2300000 +#define S5PV210_PA_PCM1 0xE1200000 +#define S5PV210_PA_PCM2 0xE2B00000 -#define S5P_PA_UART0 (S5PV210_PA_UART + 0x0) -#define S5P_PA_UART1 (S5PV210_PA_UART + 0x400) -#define S5P_PA_UART2 (S5PV210_PA_UART + 0x800) -#define S5P_PA_UART3 (S5PV210_PA_UART + 0xC00) +#define S5PV210_PA_TIMER 0xE2500000 +#define S5PV210_PA_SYSTIMER 0xE2600000 +#define S5PV210_PA_WATCHDOG 0xE2700000 +#define S5PV210_PA_RTC 0xE2800000 -#define S5P_SZ_UART SZ_256 +#define S5PV210_PA_UART 0xE2900000 -#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) +#define S5PV210_PA_SROMC 0xE8000000 -#define S5PV210_PA_SROMC (0xE8000000) -#define S5P_PA_SROMC S5PV210_PA_SROMC +#define S5PV210_PA_CFCON 0xE8200000 -#define S5PV210_PA_CFCON (0xE8200000) +#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) -#define S5PV210_PA_MDMA 0xFA200000 -#define S5PV210_PA_PDMA0 0xE0900000 -#define S5PV210_PA_PDMA1 0xE0A00000 +#define S5PV210_PA_HSOTG 0xEC000000 +#define S5PV210_PA_HSPHY 0xEC100000 -#define S5PV210_PA_FB (0xF8000000) +#define S5PV210_PA_IIS0 0xEEE30000 +#define S5PV210_PA_IIS1 0xE2100000 +#define S5PV210_PA_IIS2 0xE2A00000 -#define S5PV210_PA_FIMC0 (0xFB200000) -#define S5PV210_PA_FIMC1 (0xFB300000) -#define S5PV210_PA_FIMC2 (0xFB400000) +#define S5PV210_PA_DMC0 0xF0000000 +#define S5PV210_PA_DMC1 0xF1400000 -#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) +#define S5PV210_PA_VIC0 0xF2000000 +#define S5PV210_PA_VIC1 0xF2100000 +#define S5PV210_PA_VIC2 0xF2200000 +#define S5PV210_PA_VIC3 0xF2300000 -#define S5PV210_PA_HSOTG (0xEC000000) -#define S5PV210_PA_HSPHY (0xEC100000) +#define S5PV210_PA_FB 0xF8000000 -#define S5PV210_PA_VIC0 (0xF2000000) -#define S5PV210_PA_VIC1 (0xF2100000) -#define S5PV210_PA_VIC2 (0xF2200000) -#define S5PV210_PA_VIC3 (0xF2300000) +#define S5PV210_PA_MDMA 0xFA200000 +#define S5PV210_PA_PDMA0 0xE0900000 +#define S5PV210_PA_PDMA1 0xE0A00000 -#define S5PV210_PA_SDRAM (0x20000000) -#define S5P_PA_SDRAM S5PV210_PA_SDRAM +#define S5PV210_PA_MIPI_CSIS 0xFA600000 -/* S/PDIF */ -#define S5PV210_PA_SPDIF 0xE1100000 +#define S5PV210_PA_FIMC0 0xFB200000 +#define S5PV210_PA_FIMC1 0xFB300000 +#define S5PV210_PA_FIMC2 0xFB400000 -/* I2S */ -#define S5PV210_PA_IIS0 0xEEE30000 -#define S5PV210_PA_IIS1 0xE2100000 -#define S5PV210_PA_IIS2 0xE2A00000 +/* Compatibiltiy Defines */ -/* PCM */ -#define S5PV210_PA_PCM0 0xE2300000 -#define S5PV210_PA_PCM1 0xE1200000 -#define S5PV210_PA_PCM2 0xE2B00000 +#define S3C_PA_FB S5PV210_PA_FB +#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) +#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1) +#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2) +#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3) +#define S3C_PA_IIC S5PV210_PA_IIC0 +#define S3C_PA_IIC1 S5PV210_PA_IIC1 +#define S3C_PA_IIC2 S5PV210_PA_IIC2 +#define S3C_PA_RTC S5PV210_PA_RTC +#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG +#define S3C_PA_WDT S5PV210_PA_WATCHDOG -/* AC97 */ -#define S5PV210_PA_AC97 0xE2200000 +#define S5P_PA_CHIPID S5PV210_PA_CHIPID +#define S5P_PA_FIMC0 S5PV210_PA_FIMC0 +#define S5P_PA_FIMC1 S5PV210_PA_FIMC1 +#define S5P_PA_FIMC2 S5PV210_PA_FIMC2 +#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS +#define S5P_PA_ONENAND S5PC110_PA_ONENAND +#define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA +#define S5P_PA_SDRAM S5PV210_PA_SDRAM +#define S5P_PA_SROMC S5PV210_PA_SROMC +#define S5P_PA_SYSCON S5PV210_PA_SYSCON +#define S5P_PA_TIMER S5PV210_PA_TIMER -#define S5PV210_PA_ADC (0xE1700000) +#define SAMSUNG_PA_ADC S5PV210_PA_ADC +#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON +#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD -#define S5PV210_PA_DMC0 (0xF0000000) -#define S5PV210_PA_DMC1 (0xF1400000) +/* UART */ -#define S5PV210_PA_MIPI_CSIS 0xFA600000 +#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) -/* compatibiltiy defines. */ -#define S3C_PA_UART S5PV210_PA_UART -#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) -#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1) -#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2) -#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3) -#define S3C_PA_IIC S5PV210_PA_IIC0 -#define S3C_PA_IIC1 S5PV210_PA_IIC1 -#define S3C_PA_IIC2 S5PV210_PA_IIC2 -#define S3C_PA_FB S5PV210_PA_FB -#define S3C_PA_RTC S5PV210_PA_RTC -#define S3C_PA_WDT S5PV210_PA_WATCHDOG -#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG -#define S5P_PA_FIMC0 S5PV210_PA_FIMC0 -#define S5P_PA_FIMC1 S5PV210_PA_FIMC1 -#define S5P_PA_FIMC2 S5PV210_PA_FIMC2 -#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS +#define S3C_PA_UART S5PV210_PA_UART -#define SAMSUNG_PA_ADC S5PV210_PA_ADC -#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON -#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD +#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) +#define S5P_PA_UART3 S5P_PA_UART(3) + +#define S5P_SZ_UART SZ_256 #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 461aa035afc0..557add4fc56c 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -149,7 +149,7 @@ static struct regulator_init_data aquila_ldo2_data = { static struct regulator_init_data aquila_ldo3_data = { .constraints = { - .name = "VUSB/MIPI_1.1V", + .name = "VUSB+MIPI_1.1V", .min_uV = 1100000, .max_uV = 1100000, .apply_uV = 1, @@ -197,7 +197,7 @@ static struct regulator_init_data aquila_ldo7_data = { static struct regulator_init_data aquila_ldo8_data = { .constraints = { - .name = "VUSB/VADC_3.3V", + .name = "VUSB+VADC_3.3V", .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, @@ -207,7 +207,7 @@ static struct regulator_init_data aquila_ldo8_data = { static struct regulator_init_data aquila_ldo9_data = { .constraints = { - .name = "VCC/VCAM_2.8V", + .name = "VCC+VCAM_2.8V", .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, @@ -381,9 +381,12 @@ static struct max8998_platform_data aquila_max8998_pdata = { .buck1_set1 = S5PV210_GPH0(3), .buck1_set2 = S5PV210_GPH0(4), .buck2_set3 = S5PV210_GPH0(5), - .buck1_max_voltage1 = 1200000, - .buck1_max_voltage2 = 1200000, - .buck2_max_voltage = 1200000, + .buck1_voltage1 = 1200000, + .buck1_voltage2 = 1200000, + .buck1_voltage3 = 1200000, + .buck1_voltage4 = 1200000, + .buck2_voltage1 = 1200000, + .buck2_voltage2 = 1200000, }; #endif diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index e22d5112fd44..056f5c769b0a 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -288,7 +288,7 @@ static struct regulator_init_data goni_ldo2_data = { static struct regulator_init_data goni_ldo3_data = { .constraints = { - .name = "VUSB/MIPI_1.1V", + .name = "VUSB+MIPI_1.1V", .min_uV = 1100000, .max_uV = 1100000, .apply_uV = 1, @@ -337,7 +337,7 @@ static struct regulator_init_data goni_ldo7_data = { static struct regulator_init_data goni_ldo8_data = { .constraints = { - .name = "VUSB/VADC_3.3V", + .name = "VUSB+VADC_3.3V", .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, @@ -347,7 +347,7 @@ static struct regulator_init_data goni_ldo8_data = { static struct regulator_init_data goni_ldo9_data = { .constraints = { - .name = "VCC/VCAM_2.8V", + .name = "VCC+VCAM_2.8V", .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, @@ -521,9 +521,12 @@ static struct max8998_platform_data goni_max8998_pdata = { .buck1_set1 = S5PV210_GPH0(3), .buck1_set2 = S5PV210_GPH0(4), .buck2_set3 = S5PV210_GPH0(5), - .buck1_max_voltage1 = 1200000, - .buck1_max_voltage2 = 1200000, - .buck2_max_voltage = 1200000, + .buck1_voltage1 = 1200000, + .buck1_voltage2 = 1200000, + .buck1_voltage3 = 1200000, + .buck1_voltage4 = 1200000, + .buck2_voltage1 = 1200000, + .buck2_voltage2 = 1200000, }; #endif diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig index 09c4c21b70cc..b2a9acc5185f 100644 --- a/arch/arm/mach-s5pv310/Kconfig +++ b/arch/arm/mach-s5pv310/Kconfig @@ -122,6 +122,7 @@ config MACH_SMDKV310 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S5PV310_DEV_PD + select S5PV310_DEV_SYSMMU select S5PV310_SETUP_I2C1 select S5PV310_SETUP_SDHCI help diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h index 74d400625a23..901657fa7a12 100644 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ b/arch/arm/mach-s5pv310/include/mach/map.h @@ -1,6 +1,6 @@ /* linux/arch/arm/mach-s5pv310/include/mach/map.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * * S5PV310 - Memory map definitions @@ -23,90 +23,43 @@ #include <plat/map-s5p.h> -#define S5PV310_PA_SYSRAM (0x02025000) +#define S5PV310_PA_SYSRAM 0x02025000 -#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000)) - -#define S5PC210_PA_ONENAND (0x0C000000) -#define S5P_PA_ONENAND S5PC210_PA_ONENAND - -#define S5PC210_PA_ONENAND_DMA (0x0C600000) -#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA - -#define S5PV310_PA_CHIPID (0x10000000) -#define S5P_PA_CHIPID S5PV310_PA_CHIPID - -#define S5PV310_PA_SYSCON (0x10010000) -#define S5P_PA_SYSCON S5PV310_PA_SYSCON +#define S5PV310_PA_I2S0 0x03830000 +#define S5PV310_PA_I2S1 0xE3100000 +#define S5PV310_PA_I2S2 0xE2A00000 -#define S5PV310_PA_PMU (0x10020000) +#define S5PV310_PA_PCM0 0x03840000 +#define S5PV310_PA_PCM1 0x13980000 +#define S5PV310_PA_PCM2 0x13990000 -#define S5PV310_PA_CMU (0x10030000) - -#define S5PV310_PA_WATCHDOG (0x10060000) -#define S5PV310_PA_RTC (0x10070000) - -#define S5PV310_PA_DMC0 (0x10400000) - -#define S5PV310_PA_COMBINER (0x10448000) - -#define S5PV310_PA_COREPERI (0x10500000) -#define S5PV310_PA_GIC_CPU (0x10500100) -#define S5PV310_PA_TWD (0x10500600) -#define S5PV310_PA_GIC_DIST (0x10501000) -#define S5PV310_PA_L2CC (0x10502000) - -/* DMA */ -#define S5PV310_PA_MDMA 0x10810000 -#define S5PV310_PA_PDMA0 0x12680000 -#define S5PV310_PA_PDMA1 0x12690000 - -#define S5PV310_PA_GPIO1 (0x11400000) -#define S5PV310_PA_GPIO2 (0x11000000) -#define S5PV310_PA_GPIO3 (0x03860000) - -#define S5PV310_PA_MIPI_CSIS0 0x11880000 -#define S5PV310_PA_MIPI_CSIS1 0x11890000 +#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000)) -#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) +#define S5PC210_PA_ONENAND 0x0C000000 +#define S5PC210_PA_ONENAND_DMA 0x0C600000 -#define S5PV310_PA_SROMC (0x12570000) -#define S5P_PA_SROMC S5PV310_PA_SROMC +#define S5PV310_PA_CHIPID 0x10000000 -/* S/PDIF */ -#define S5PV310_PA_SPDIF 0xE1100000 +#define S5PV310_PA_SYSCON 0x10010000 +#define S5PV310_PA_PMU 0x10020000 +#define S5PV310_PA_CMU 0x10030000 -/* I2S */ -#define S5PV310_PA_I2S0 0x03830000 -#define S5PV310_PA_I2S1 0xE3100000 -#define S5PV310_PA_I2S2 0xE2A00000 +#define S5PV310_PA_WATCHDOG 0x10060000 +#define S5PV310_PA_RTC 0x10070000 -/* PCM */ -#define S5PV310_PA_PCM0 0x03840000 -#define S5PV310_PA_PCM1 0x13980000 -#define S5PV310_PA_PCM2 0x13990000 +#define S5PV310_PA_DMC0 0x10400000 -/* AC97 */ -#define S5PV310_PA_AC97 0x139A0000 +#define S5PV310_PA_COMBINER 0x10448000 -#define S5PV310_PA_UART (0x13800000) +#define S5PV310_PA_COREPERI 0x10500000 +#define S5PV310_PA_GIC_CPU 0x10500100 +#define S5PV310_PA_TWD 0x10500600 +#define S5PV310_PA_GIC_DIST 0x10501000 +#define S5PV310_PA_L2CC 0x10502000 -#define S5P_PA_UART(x) (S5PV310_PA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_PA_UART0 S5P_PA_UART(0) -#define S5P_PA_UART1 S5P_PA_UART(1) -#define S5P_PA_UART2 S5P_PA_UART(2) -#define S5P_PA_UART3 S5P_PA_UART(3) -#define S5P_PA_UART4 S5P_PA_UART(4) - -#define S5P_SZ_UART SZ_256 - -#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) - -#define S5PV310_PA_TIMER (0x139D0000) -#define S5P_PA_TIMER S5PV310_PA_TIMER - -#define S5PV310_PA_SDRAM (0x40000000) -#define S5P_PA_SDRAM S5PV310_PA_SDRAM +#define S5PV310_PA_MDMA 0x10810000 +#define S5PV310_PA_PDMA0 0x12680000 +#define S5PV310_PA_PDMA1 0x12690000 #define S5PV310_PA_SYSMMU_MDMA 0x10A40000 #define S5PV310_PA_SYSMMU_SSS 0x10A50000 @@ -124,11 +77,32 @@ #define S5PV310_PA_SYSMMU_TV 0x12E20000 #define S5PV310_PA_SYSMMU_MFC_L 0x13620000 #define S5PV310_PA_SYSMMU_MFC_R 0x13630000 -#define S5PV310_SYSMMU_TOTAL_IPNUM 16 -#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM -/* compatibiltiy defines. */ -#define S3C_PA_UART S5PV310_PA_UART +#define S5PV310_PA_GPIO1 0x11400000 +#define S5PV310_PA_GPIO2 0x11000000 +#define S5PV310_PA_GPIO3 0x03860000 + +#define S5PV310_PA_MIPI_CSIS0 0x11880000 +#define S5PV310_PA_MIPI_CSIS1 0x11890000 + +#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) + +#define S5PV310_PA_SROMC 0x12570000 + +#define S5PV310_PA_UART 0x13800000 + +#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) + +#define S5PV310_PA_AC97 0x139A0000 + +#define S5PV310_PA_TIMER 0x139D0000 + +#define S5PV310_PA_SDRAM 0x40000000 + +#define S5PV310_PA_SPDIF 0xE1100000 + +/* Compatibiltiy Defines */ + #define S3C_PA_HSMMC0 S5PV310_PA_HSMMC(0) #define S3C_PA_HSMMC1 S5PV310_PA_HSMMC(1) #define S3C_PA_HSMMC2 S5PV310_PA_HSMMC(2) @@ -143,7 +117,28 @@ #define S3C_PA_IIC7 S5PV310_PA_IIC(7) #define S3C_PA_RTC S5PV310_PA_RTC #define S3C_PA_WDT S5PV310_PA_WATCHDOG + +#define S5P_PA_CHIPID S5PV310_PA_CHIPID #define S5P_PA_MIPI_CSIS0 S5PV310_PA_MIPI_CSIS0 #define S5P_PA_MIPI_CSIS1 S5PV310_PA_MIPI_CSIS1 +#define S5P_PA_ONENAND S5PC210_PA_ONENAND +#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA +#define S5P_PA_SDRAM S5PV310_PA_SDRAM +#define S5P_PA_SROMC S5PV310_PA_SROMC +#define S5P_PA_SYSCON S5PV310_PA_SYSCON +#define S5P_PA_TIMER S5PV310_PA_TIMER + +/* UART */ + +#define S3C_PA_UART S5PV310_PA_UART + +#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) +#define S5P_PA_UART3 S5P_PA_UART(3) +#define S5P_PA_UART4 S5P_PA_UART(4) + +#define S5P_SZ_UART SZ_256 #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/sysmmu.h b/arch/arm/mach-s5pv310/include/mach/sysmmu.h index 662fe85ff4d5..598fc5c9211b 100644 --- a/arch/arm/mach-s5pv310/include/mach/sysmmu.h +++ b/arch/arm/mach-s5pv310/include/mach/sysmmu.h @@ -13,6 +13,9 @@ #ifndef __ASM_ARM_ARCH_SYSMMU_H #define __ASM_ARM_ARCH_SYSMMU_H __FILE__ +#define S5PV310_SYSMMU_TOTAL_IPNUM 16 +#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM + enum s5pv310_sysmmu_ips { SYSMMU_MDMA, SYSMMU_SSS, @@ -32,7 +35,7 @@ enum s5pv310_sysmmu_ips { SYSMMU_MFC_R, }; -static char *sysmmu_ips_name[S5P_SYSMMU_TOTAL_IPNUM] = { +static char *sysmmu_ips_name[S5PV310_SYSMMU_TOTAL_IPNUM] = { "SYSMMU_MDMA" , "SYSMMU_SSS" , "SYSMMU_FIMC0" , diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index d43c5ef58eb6..bd3e1bfdd6aa 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -241,6 +241,9 @@ static struct locomo_platform_data locomo_info = { struct platform_device collie_locomo_device = { .name = "locomo", .id = 0, + .dev = { + .platform_data = &locomo_info, + }, .num_resources = ARRAY_SIZE(locomo_resources), .resource = locomo_resources, }; diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h index cacf17a958cd..53677e464d4b 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear320.h +++ b/arch/arm/mach-spear3xx/include/mach/spear320.h @@ -62,7 +62,7 @@ #define SPEAR320_SMII1_BASE 0xAB000000 #define SPEAR320_SMII1_SIZE 0x01000000 -#define SPEAR320_SOC_CONFIG_BASE 0xB4000000 +#define SPEAR320_SOC_CONFIG_BASE 0xB3000000 #define SPEAR320_SOC_CONFIG_SIZE 0x00000070 /* Interrupt registers offsets and masks */ #define INT_STS_MASK_REG 0x04 diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 9d30c6f804b9..e4509bae8fc4 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -405,7 +405,7 @@ config CPU_V6 config CPU_32v6K bool "Support ARM V6K processor extensions" if !SMP depends on CPU_V6 || CPU_V7 - default y if SMP && !(ARCH_MX3 || ARCH_OMAP2) + default y if SMP help Say Y here if your ARMv6 processor supports the 'K' extension. This enables the kernel to use some instructions not present @@ -416,7 +416,7 @@ config CPU_32v6K # ARMv7 config CPU_V7 bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX - select CPU_32v6K if !ARCH_OMAP2 + select CPU_32v6K select CPU_32v7 select CPU_ABRT_EV7 select CPU_PABRT_V7 @@ -644,7 +644,7 @@ config ARM_THUMBEE config SWP_EMULATE bool "Emulate SWP/SWPB instructions" - depends on CPU_V7 && !CPU_V6 + depends on !CPU_USE_DOMAINS && CPU_V7 && !CPU_V6 select HAVE_PROC_CPU if PROC_FS default y if SMP help diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 170c9bb95866..f2ce38e085d2 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -49,7 +49,13 @@ static inline void cache_wait(void __iomem *reg, unsigned long mask) static inline void cache_sync(void) { void __iomem *base = l2x0_base; + +#ifdef CONFIG_ARM_ERRATA_753970 + /* write to an unmmapped register */ + writel_relaxed(0, base + L2X0_DUMMY_REG); +#else writel_relaxed(0, base + L2X0_CACHE_SYNC); +#endif cache_wait(base + L2X0_CACHE_SYNC, 1); } diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 0c1172b56b4e..8e3356239136 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -264,6 +264,12 @@ __v7_setup: orreq r10, r10, #1 << 6 @ set bit #6 mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif +#ifdef CONFIG_ARM_ERRATA_751472 + cmp r6, #0x30 @ present prior to r3p0 + mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register + orrlt r10, r10, #1 << 11 @ set bit #11 + mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register +#endif 3: mov r10, #0 #ifdef HARVARD_CACHE diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 8aa974491dfc..c074e66ad224 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -10,8 +10,6 @@ */ #include <linux/cpumask.h> -#include <linux/err.h> -#include <linux/errno.h> #include <linux/init.h> #include <linux/mutex.h> #include <linux/oprofile.h> @@ -46,6 +44,7 @@ char *op_name_from_perf_id(void) return NULL; } } +#endif static int report_trace(struct stackframe *frame, void *d) { @@ -85,7 +84,7 @@ static struct frame_tail* user_backtrace(struct frame_tail *tail) /* frame pointers should strictly progress back up the stack * (towards higher addresses) */ - if (tail >= buftail[0].fp) + if (tail + 1 >= buftail[0].fp) return NULL; return buftail[0].fp-1; @@ -111,6 +110,7 @@ static void arm_backtrace(struct pt_regs * const regs, unsigned int depth) int __init oprofile_arch_init(struct oprofile_operations *ops) { + /* provide backtrace support also in timer mode: */ ops->backtrace = arm_backtrace; return oprofile_perf_init(ops); @@ -120,11 +120,3 @@ void __exit oprofile_arch_exit(void) { oprofile_perf_exit(); } -#else -int __init oprofile_arch_init(struct oprofile_operations *ops) -{ - pr_info("oprofile: hardware counters not available\n"); - return -ENODEV; -} -void __exit oprofile_arch_exit(void) {} -#endif /* CONFIG_HW_PERF_EVENTS */ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 3a70ebf0477f..ff469c4f1d76 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -95,6 +95,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MX35_3DS: case MACH_TYPE_PCM043: case MACH_TYPE_LILLY1131: + case MACH_TYPE_VPR200: uart_base = MX3X_UART1_BASE_ADDR; break; case MACH_TYPE_MAGX_ZN5: @@ -102,6 +103,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) break; case MACH_TYPE_MX51_BABBAGE: case MACH_TYPE_EUKREA_CPUIMX51SD: + case MACH_TYPE_MX51_3DS: uart_base = MX51_UART1_BASE_ADDR; break; case MACH_TYPE_MX50_RDP: diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index b77e018d36c1..a9aa5ad3f4eb 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -139,10 +139,11 @@ static const unsigned long mfpr_edge[] = { #define mfp_configured(p) ((p)->config != -1) /* - * perform a read-back of any MFPR register to make sure the + * perform a read-back of any valid MFPR register to make sure the * previous writings are finished */ -#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0) +static unsigned long mfpr_off_readback; +#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + mfpr_off_readback) static inline void __mfp_config_run(struct mfp_pin *p) { @@ -248,6 +249,9 @@ void __init mfp_init_addr(struct mfp_addr_map *map) spin_lock_irqsave(&mfp_spin_lock, flags); + /* mfp offset for readback */ + mfpr_off_readback = map[0].offset; + for (p = map; p->start != MFP_PIN_INVALID; p++) { offset = p->offset; i = p->start; diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index deb39951a22e..557f8c507f6d 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -37,6 +37,14 @@ config S5P_GPIO_INT help Common code for the GPIO interrupts (other than external interrupts.) +comment "System MMU" + +config S5P_SYSTEM_MMU + bool "S5P SYSTEM MMU" + depends on ARCH_S5PV310 + help + Say Y here if you want to enable System MMU + config S5P_DEV_FIMC0 bool help @@ -66,19 +74,3 @@ config S5P_DEV_CSIS1 bool help Compile in platform device definitions for MIPI-CSIS channel 1 - -menuconfig S5P_SYSMMU - bool "SYSMMU support" - depends on ARCH_S5PV310 - help - This is a System MMU driver for Samsung ARM based Soc. - -if S5P_SYSMMU - -config S5P_SYSMMU_DEBUG - bool "Enables debug messages" - depends on S5P_SYSMMU - help - This enables SYSMMU driver debug massages. - -endif diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 92efe1adcfd6..4bd5cf908977 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -19,6 +19,7 @@ obj-y += clock.o obj-y += irq.o obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o +obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o @@ -30,4 +31,3 @@ obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o -obj-$(CONFIG_S5P_SYSMMU) += sysmmu.o diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c index 6a7342886171..afaf87fdb93e 100644 --- a/arch/arm/plat-s5p/dev-uart.c +++ b/arch/arm/plat-s5p/dev-uart.c @@ -28,7 +28,7 @@ static struct resource s5p_uart0_resource[] = { [0] = { .start = S5P_PA_UART0, - .end = S5P_PA_UART0 + S5P_SZ_UART, + .end = S5P_PA_UART0 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -51,7 +51,7 @@ static struct resource s5p_uart0_resource[] = { static struct resource s5p_uart1_resource[] = { [0] = { .start = S5P_PA_UART1, - .end = S5P_PA_UART1 + S5P_SZ_UART, + .end = S5P_PA_UART1 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -74,7 +74,7 @@ static struct resource s5p_uart1_resource[] = { static struct resource s5p_uart2_resource[] = { [0] = { .start = S5P_PA_UART2, - .end = S5P_PA_UART2 + S5P_SZ_UART, + .end = S5P_PA_UART2 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -98,7 +98,7 @@ static struct resource s5p_uart3_resource[] = { #if CONFIG_SERIAL_SAMSUNG_UARTS > 3 [0] = { .start = S5P_PA_UART3, - .end = S5P_PA_UART3 + S5P_SZ_UART, + .end = S5P_PA_UART3 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -123,7 +123,7 @@ static struct resource s5p_uart4_resource[] = { #if CONFIG_SERIAL_SAMSUNG_UARTS > 4 [0] = { .start = S5P_PA_UART4, - .end = S5P_PA_UART4 + S5P_SZ_UART, + .end = S5P_PA_UART4 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -148,7 +148,7 @@ static struct resource s5p_uart5_resource[] = { #if CONFIG_SERIAL_SAMSUNG_UARTS > 5 [0] = { .start = S5P_PA_UART5, - .end = S5P_PA_UART5 + S5P_SZ_UART, + .end = S5P_PA_UART5 + S5P_SZ_UART - 1, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-s5p/include/plat/sysmmu.h deleted file mode 100644 index db298fc5438a..000000000000 --- a/arch/arm/plat-s5p/include/plat/sysmmu.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Samsung sysmmu driver - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_SYSMMU_H -#define __ASM_PLAT_S5P_SYSMMU_H __FILE__ - -/* debug macro */ -#ifdef CONFIG_S5P_SYSMMU_DEBUG -#define sysmmu_debug(fmt, arg...) printk(KERN_INFO "[%s] " fmt, __func__, ## arg) -#else -#define sysmmu_debug(fmt, arg...) do { } while (0) -#endif - -#endif /* __ASM_PLAT_S5P_SYSMMU_H */ diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c index d804914dc2e2..ffe8a48bc3c1 100644 --- a/arch/arm/plat-s5p/sysmmu.c +++ b/arch/arm/plat-s5p/sysmmu.c @@ -16,8 +16,6 @@ #include <mach/regs-sysmmu.h> #include <mach/sysmmu.h> -#include <plat/sysmmu.h> - struct sysmmu_controller s5p_sysmmu_cntlrs[S5P_SYSMMU_TOTAL_IPNUM]; void s5p_sysmmu_register(struct sysmmu_controller *sysmmuconp) @@ -123,7 +121,7 @@ static int s5p_sysmmu_set_tablebase(sysmmu_ips ips) : "=r" (pg) : : "cc"); \ pg &= ~0x3fff; - sysmmu_debug("CP15 TTBR0 : 0x%x\n", pg); + printk(KERN_INFO "%s: CP15 TTBR0 : 0x%x\n", __func__, pg); /* Set sysmmu page table base address */ __raw_writel(pg, sysmmuconp->regs + S5P_PT_BASE_ADDR); diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c index 236ef8427d7d..3e4bd8147bf4 100644 --- a/arch/arm/plat-samsung/dev-ts.c +++ b/arch/arm/plat-samsung/dev-ts.c @@ -58,4 +58,3 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd) s3c_device_ts.dev.platform_data = npd; } -EXPORT_SYMBOL(s3c24xx_ts_set_platdata); diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index d9025e377675..30518cc9a67c 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -17,6 +17,8 @@ #include <linux/irq.h> +struct sys_device; + #ifdef CONFIG_PM extern __init int s3c_pm_init(void); diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h index 99ba6789cc97..6dd455bafdfd 100644 --- a/arch/arm/plat-spear/include/plat/uncompress.h +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -24,10 +24,10 @@ static inline void putc(int c) { void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE; - while (readl(base + UART01x_FR) & UART01x_FR_TXFF) + while (readl_relaxed(base + UART01x_FR) & UART01x_FR_TXFF) barrier(); - writel(c, base + UART01x_DR); + writel_relaxed(c, base + UART01x_DR); } static inline void flush(void) diff --git a/arch/arm/plat-spear/include/plat/vmalloc.h b/arch/arm/plat-spear/include/plat/vmalloc.h index 09e9372aea21..8c8b24d07046 100644 --- a/arch/arm/plat-spear/include/plat/vmalloc.h +++ b/arch/arm/plat-spear/include/plat/vmalloc.h @@ -14,6 +14,6 @@ #ifndef __PLAT_VMALLOC_H #define __PLAT_VMALLOC_H -#define VMALLOC_END 0xF0000000 +#define VMALLOC_END 0xF0000000UL #endif /* __PLAT_VMALLOC_H */ diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 2fea897ebeb1..9d6feaabbe7d 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sun Dec 12 23:24:27 2010 +# Last update: Mon Feb 7 08:59:27 2011 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2240,7 +2240,7 @@ arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250 vs_v210 MACH_VS_V210 VS_V210 2252 vs_v212 MACH_VS_V212 VS_V212 2253 hmt MACH_HMT HMT 2254 -suen3 MACH_SUEN3 SUEN3 2255 +km_kirkwood MACH_KM_KIRKWOOD KM_KIRKWOOD 2255 vesper MACH_VESPER VESPER 2256 str9 MACH_STR9 STR9 2257 omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258 @@ -2987,7 +2987,7 @@ pxwnas_500_1000 MACH_PXWNAS_500_1000 PXWNAS_500_1000 3001 ea20 MACH_EA20 EA20 3002 awm2 MACH_AWM2 AWM2 3003 ti8148evm MACH_TI8148EVM TI8148EVM 3004 -tegra_seaboard MACH_TEGRA_SEABOARD TEGRA_SEABOARD 3005 +seaboard MACH_SEABOARD SEABOARD 3005 linkstation_chlv2 MACH_LINKSTATION_CHLV2 LINKSTATION_CHLV2 3006 tera_pro2_rack MACH_TERA_PRO2_RACK TERA_PRO2_RACK 3007 rubys MACH_RUBYS RUBYS 3008 @@ -3190,7 +3190,7 @@ synergy MACH_SYNERGY SYNERGY 3205 ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206 wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207 punica MACH_PUNICA PUNICA 3208 -sbc_nt250 MACH_SBC_NT250 SBC_NT250 3209 +trimslice MACH_TRIMSLICE TRIMSLICE 3209 mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210 mackerel MACH_MACKEREL MACKEREL 3211 fa9x27 MACH_FA9X27 FA9X27 3213 @@ -3219,3 +3219,100 @@ pivicc MACH_PIVICC PIVICC 3235 pcm048 MACH_PCM048 PCM048 3236 dds MACH_DDS DDS 3237 chalten_xa1 MACH_CHALTEN_XA1 CHALTEN_XA1 3238 +ts48xx MACH_TS48XX TS48XX 3239 +tonga2_tfttimer MACH_TONGA2_TFTTIMER TONGA2_TFTTIMER 3240 +whistler MACH_WHISTLER WHISTLER 3241 +asl_phoenix MACH_ASL_PHOENIX ASL_PHOENIX 3242 +at91sam9263otlite MACH_AT91SAM9263OTLITE AT91SAM9263OTLITE 3243 +ddplug MACH_DDPLUG DDPLUG 3244 +d2plug MACH_D2PLUG D2PLUG 3245 +kzm9d MACH_KZM9D KZM9D 3246 +verdi_lte MACH_VERDI_LTE VERDI_LTE 3247 +nanozoom MACH_NANOZOOM NANOZOOM 3248 +dm3730_som_lv MACH_DM3730_SOM_LV DM3730_SOM_LV 3249 +dm3730_torpedo MACH_DM3730_TORPEDO DM3730_TORPEDO 3250 +anchovy MACH_ANCHOVY ANCHOVY 3251 +re2rev20 MACH_RE2REV20 RE2REV20 3253 +re2rev21 MACH_RE2REV21 RE2REV21 3254 +cns21xx MACH_CNS21XX CNS21XX 3255 +rider MACH_RIDER RIDER 3257 +nsk330 MACH_NSK330 NSK330 3258 +cns2133evb MACH_CNS2133EVB CNS2133EVB 3259 +z3_816x_mod MACH_Z3_816X_MOD Z3_816X_MOD 3260 +z3_814x_mod MACH_Z3_814X_MOD Z3_814X_MOD 3261 +beect MACH_BEECT BEECT 3262 +dma_thunderbug MACH_DMA_THUNDERBUG DMA_THUNDERBUG 3263 +omn_at91sam9g20 MACH_OMN_AT91SAM9G20 OMN_AT91SAM9G20 3264 +mx25_e2s_uc MACH_MX25_E2S_UC MX25_E2S_UC 3265 +mione MACH_MIONE MIONE 3266 +top9000_tcu MACH_TOP9000_TCU TOP9000_TCU 3267 +top9000_bsl MACH_TOP9000_BSL TOP9000_BSL 3268 +kingdom MACH_KINGDOM KINGDOM 3269 +armadillo460 MACH_ARMADILLO460 ARMADILLO460 3270 +lq2 MACH_LQ2 LQ2 3271 +sweda_tms2 MACH_SWEDA_TMS2 SWEDA_TMS2 3272 +mx53_loco MACH_MX53_LOCO MX53_LOCO 3273 +acer_a8 MACH_ACER_A8 ACER_A8 3275 +acer_gauguin MACH_ACER_GAUGUIN ACER_GAUGUIN 3276 +guppy MACH_GUPPY GUPPY 3277 +mx61_ard MACH_MX61_ARD MX61_ARD 3278 +tx53 MACH_TX53 TX53 3279 +omapl138_case_a3 MACH_OMAPL138_CASE_A3 OMAPL138_CASE_A3 3280 +uemd MACH_UEMD UEMD 3281 +ccwmx51mut MACH_CCWMX51MUT CCWMX51MUT 3282 +rockhopper MACH_ROCKHOPPER ROCKHOPPER 3283 +nookcolor MACH_NOOKCOLOR NOOKCOLOR 3284 +hkdkc100 MACH_HKDKC100 HKDKC100 3285 +ts42xx MACH_TS42XX TS42XX 3286 +aebl MACH_AEBL AEBL 3287 +wario MACH_WARIO WARIO 3288 +gfs_spm MACH_GFS_SPM GFS_SPM 3289 +cm_t3730 MACH_CM_T3730 CM_T3730 3290 +isc3 MACH_ISC3 ISC3 3291 +rascal MACH_RASCAL RASCAL 3292 +hrefv60 MACH_HREFV60 HREFV60 3293 +tpt_2_0 MACH_TPT_2_0 TPT_2_0 3294 +pyramid_td MACH_PYRAMID_TD PYRAMID_TD 3295 +splendor MACH_SPLENDOR SPLENDOR 3296 +guf_planet MACH_GUF_PLANET GUF_PLANET 3297 +msm8x60_qt MACH_MSM8X60_QT MSM8X60_QT 3298 +htc_hd_mini MACH_HTC_HD_MINI HTC_HD_MINI 3299 +athene MACH_ATHENE ATHENE 3300 +deep_r_ek_1 MACH_DEEP_R_EK_1 DEEP_R_EK_1 3301 +vivow_ct MACH_VIVOW_CT VIVOW_CT 3302 +nery_1000 MACH_NERY_1000 NERY_1000 3303 +rfl109145_ssrv MACH_RFL109145_SSRV RFL109145_SSRV 3304 +nmh MACH_NMH NMH 3305 +wn802t MACH_WN802T WN802T 3306 +dragonet MACH_DRAGONET DRAGONET 3307 +geneva_b MACH_GENEVA_B GENEVA_B 3308 +at91sam9263desk16l MACH_AT91SAM9263DESK16L AT91SAM9263DESK16L 3309 +bcmhana_sv MACH_BCMHANA_SV BCMHANA_SV 3310 +bcmhana_tablet MACH_BCMHANA_TABLET BCMHANA_TABLET 3311 +koi MACH_KOI KOI 3312 +ts4800 MACH_TS4800 TS4800 3313 +tqma9263 MACH_TQMA9263 TQMA9263 3314 +holiday MACH_HOLIDAY HOLIDAY 3315 +dma_6410 MACH_DMA6410 DMA6410 3316 +pcats_overlay MACH_PCATS_OVERLAY PCATS_OVERLAY 3317 +hwgw6410 MACH_HWGW6410 HWGW6410 3318 +shenzhou MACH_SHENZHOU SHENZHOU 3319 +cwme9210 MACH_CWME9210 CWME9210 3320 +cwme9210js MACH_CWME9210JS CWME9210JS 3321 +pgs_v1 MACH_PGS_SITARA PGS_SITARA 3322 +colibri_tegra2 MACH_COLIBRI_TEGRA2 COLIBRI_TEGRA2 3323 +w21 MACH_W21 W21 3324 +polysat1 MACH_POLYSAT1 POLYSAT1 3325 +dataway MACH_DATAWAY DATAWAY 3326 +cobral138 MACH_COBRAL138 COBRAL138 3327 +roverpcs8 MACH_ROVERPCS8 ROVERPCS8 3328 +marvelc MACH_MARVELC MARVELC 3329 +navefihid MACH_NAVEFIHID NAVEFIHID 3330 +dm365_cv100 MACH_DM365_CV100 DM365_CV100 3331 +able MACH_ABLE ABLE 3332 +legacy MACH_LEGACY LEGACY 3333 +icong MACH_ICONG ICONG 3334 +rover_g8 MACH_ROVER_G8 ROVER_G8 3335 +t5388p MACH_T5388P T5388P 3336 +dingo MACH_DINGO DINGO 3337 +goflexhome MACH_GOFLEXHOME GOFLEXHOME 3338 |