diff options
Diffstat (limited to 'arch/arm')
49 files changed, 297 insertions, 180 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a3c66dd776e2..d39efbb4987e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -592,6 +592,7 @@ config ARCH_KIRKWOOD bool "Marvell Kirkwood" select CPU_FEROCEON select PCI + select PCI_QUIRKS select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select NEED_MACH_IO_H @@ -1450,6 +1451,16 @@ config PL310_ERRATA_769419 on systems with an outer cache, the store buffer is drained explicitly. +config ARM_ERRATA_775420 + bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" + depends on CPU_V7 + help + This option enables the workaround for the 775420 Cortex-A9 (r2p2, + r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance + operation aborts with MMU exception, it might cause the processor + to deadlock. This workaround puts DSB before executing ISB if + an abort may occur on cache maintenance. + endmenu source "arch/arm/common/Kconfig" @@ -2221,6 +2232,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_IMX tristate "CPUfreq driver for i.MX CPUs" depends on ARCH_MXC && CPU_FREQ + select CPU_FREQ_TABLE help This enables the CPUfreq driver for i.MX CPUs. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 3afd07659ad0..8676c911f22a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -287,10 +287,10 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -%.dtb: +%.dtb: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ -dtbs: +dtbs: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ # We use MRPROPER_FILES and CLEAN_FILES now diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index ace2dee28286..adff07672796 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -648,6 +648,7 @@ __armv7_mmu_cache_on: mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs #endif mrc p15, 0, r0, c1, c0, 0 @ read control reg + bic r0, r0, #1 << 28 @ clear SCTLR.TRE orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x003c @ write buffer #ifdef CONFIG_MMU diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 03fb93621d0d..5c8b3bf4d825 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -320,4 +320,12 @@ .size \name , . - \name .endm + .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req +#ifndef CONFIG_CPU_USE_DOMAINS + adds \tmp, \addr, #\size - 1 + sbcccs \tmp, \tmp, \limit + bcs \bad +#endif + .endm + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h index 917626128a1d..a2fe893802a6 100644 --- a/arch/arm/include/asm/hwcap.h +++ b/arch/arm/include/asm/hwcap.h @@ -18,11 +18,12 @@ #define HWCAP_THUMBEE (1 << 11) #define HWCAP_NEON (1 << 12) #define HWCAP_VFPv3 (1 << 13) -#define HWCAP_VFPv3D16 (1 << 14) +#define HWCAP_VFPv3D16 (1 << 14) /* also set for VFPv4-D16 */ #define HWCAP_TLS (1 << 15) #define HWCAP_VFPv4 (1 << 16) #define HWCAP_IDIVA (1 << 17) #define HWCAP_IDIVT (1 << 18) +#define HWCAP_VFPD32 (1 << 19) /* set if VFP has 32 regs (not 16) */ #define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT) #if defined(__KERNEL__) diff --git a/arch/arm/include/asm/mutex.h b/arch/arm/include/asm/mutex.h index 6e813d93a736..b1479fd04a95 100644 --- a/arch/arm/include/asm/mutex.h +++ b/arch/arm/include/asm/mutex.h @@ -9,13 +9,8 @@ #define _ASM_MUTEX_H /* * On pre-ARMv6 hardware this results in a swp-based implementation, - * which is the most efficient. For ARMv6+, we have exclusive memory - * accessors and use atomic_dec to avoid the extra xchg operations - * on the locking slowpaths. + * which is the most efficient. For ARMv6+, we emit a pair of exclusive + * accesses instead. */ -#if __LINUX_ARM_ARCH__ < 6 #include <asm-generic/mutex-xchg.h> -#else -#include <asm-generic/mutex-dec.h> -#endif #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 752514cb34de..3e8d23335a03 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -221,6 +221,18 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) +#define pte_none(pte) (!pte_val(pte)) +#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) +#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) +#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) +#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) +#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) +#define pte_special(pte) (0) + +#define pte_present_user(pte) \ + ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ + (L_PTE_PRESENT | L_PTE_USER)) + #if __LINUX_ARM_ARCH__ < 6 static inline void __sync_icache_dcache(pte_t pteval) { @@ -232,25 +244,15 @@ extern void __sync_icache_dcache(pte_t pteval); static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval) { - if (addr >= TASK_SIZE) - set_pte_ext(ptep, pteval, 0); - else { + unsigned long ext = 0; + + if (addr < TASK_SIZE && pte_present_user(pteval)) { __sync_icache_dcache(pteval); - set_pte_ext(ptep, pteval, PTE_EXT_NG); + ext |= PTE_EXT_NG; } -} -#define pte_none(pte) (!pte_val(pte)) -#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) -#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) -#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) -#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) -#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) -#define pte_special(pte) (0) - -#define pte_present_user(pte) \ - ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ - (L_PTE_PRESENT | L_PTE_USER)) + set_pte_ext(ptep, pteval, ext); +} #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } @@ -277,13 +279,13 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) * * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * <--------------- offset --------------------> <- type --> 0 0 0 + * <--------------- offset ----------------------> < type -> 0 0 0 * - * This gives us up to 63 swap files and 32GB per swap file. Note that + * This gives us up to 31 swap files and 64GB per swap file. Note that * the offset field is always non-zero. */ #define __SWP_TYPE_SHIFT 3 -#define __SWP_TYPE_BITS 6 +#define __SWP_TYPE_BITS 5 #define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) #define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 71f6536d17ac..0a070e98625d 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -101,28 +101,39 @@ extern int __get_user_1(void *); extern int __get_user_2(void *); extern int __get_user_4(void *); -#define __get_user_x(__r2,__p,__e,__s,__i...) \ +#define __GUP_CLOBBER_1 "lr", "cc" +#ifdef CONFIG_CPU_USE_DOMAINS +#define __GUP_CLOBBER_2 "ip", "lr", "cc" +#else +#define __GUP_CLOBBER_2 "lr", "cc" +#endif +#define __GUP_CLOBBER_4 "lr", "cc" + +#define __get_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%1", "r2") \ + __asmeq("%3", "r1") \ "bl __get_user_" #__s \ : "=&r" (__e), "=r" (__r2) \ - : "0" (__p) \ - : __i, "cc") + : "0" (__p), "r" (__l) \ + : __GUP_CLOBBER_##__s) #define get_user(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ register unsigned long __r2 asm("r2"); \ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __get_user_x(__r2, __p, __e, 1, "lr"); \ - break; \ + __get_user_x(__r2, __p, __e, __l, 1); \ + break; \ case 2: \ - __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \ + __get_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __get_user_x(__r2, __p, __e, 4, "lr"); \ + __get_user_x(__r2, __p, __e, __l, 4); \ break; \ default: __e = __get_user_bad(); break; \ } \ @@ -135,31 +146,34 @@ extern int __put_user_2(void *, unsigned int); extern int __put_user_4(void *, unsigned int); extern int __put_user_8(void *, unsigned long long); -#define __put_user_x(__r2,__p,__e,__s) \ +#define __put_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%2", "r2") \ + __asmeq("%3", "r1") \ "bl __put_user_" #__s \ : "=&r" (__e) \ - : "0" (__p), "r" (__r2) \ + : "0" (__p), "r" (__r2), "r" (__l) \ : "ip", "lr", "cc") #define put_user(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __r2 asm("r2") = (x); \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __put_user_x(__r2, __p, __e, 1); \ + __put_user_x(__r2, __p, __e, __l, 1); \ break; \ case 2: \ - __put_user_x(__r2, __p, __e, 2); \ + __put_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __put_user_x(__r2, __p, __e, 4); \ + __put_user_x(__r2, __p, __e, __l, 4); \ break; \ case 8: \ - __put_user_x(__r2, __p, __e, 8); \ + __put_user_x(__r2, __p, __e, __l, 8); \ break; \ default: __e = __put_user_bad(); break; \ } \ diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h index 3d5fc41ae8d3..c49c8f778b5d 100644 --- a/arch/arm/include/asm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -27,9 +27,9 @@ #if __LINUX_ARM_ARCH__ <= 6 ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] - tst \tmp, #HWCAP_VFPv3D16 - ldceq p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} - addne \base, \base, #32*4 @ step over unused register space + tst \tmp, #HWCAP_VFPD32 + ldcnel p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field @@ -51,9 +51,9 @@ #if __LINUX_ARM_ARCH__ <= 6 ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] - tst \tmp, #HWCAP_VFPv3D16 - stceq p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} - addne \base, \base, #32*4 @ step over unused register space + tst \tmp, #HWCAP_VFPD32 + stcnel p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index ba386bd94107..18d39ea4c02f 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -159,6 +159,12 @@ static int debug_arch_supported(void) arch >= ARM_DEBUG_ARCH_V7_1; } +/* Can we determine the watchpoint access type from the fsr? */ +static int debug_exception_updates_fsr(void) +{ + return 0; +} + /* Determine number of WRP registers available. */ static int get_num_wrp_resources(void) { @@ -619,18 +625,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) info->address &= ~alignment_mask; info->ctrl.len <<= offset; - /* - * Currently we rely on an overflow handler to take - * care of single-stepping the breakpoint when it fires. - * In the case of userspace breakpoints on a core with V7 debug, - * we can use the mismatch feature as a poor-man's hardware - * single-step, but this only works for per-task breakpoints. - */ - if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) || - !core_has_mismatch_brps() || !bp->hw.bp_target)) { - pr_warning("overflow handler required but none found\n"); - ret = -EINVAL; + if (!bp->overflow_handler) { + /* + * Mismatch breakpoints are required for single-stepping + * breakpoints. + */ + if (!core_has_mismatch_brps()) + return -EINVAL; + + /* We don't allow mismatch breakpoints in kernel space. */ + if (arch_check_bp_in_kernelspace(bp)) + return -EPERM; + + /* + * Per-cpu breakpoints are not supported by our stepping + * mechanism. + */ + if (!bp->hw.bp_target) + return -EINVAL; + + /* + * We only support specific access types if the fsr + * reports them. + */ + if (!debug_exception_updates_fsr() && + (info->ctrl.type == ARM_BREAKPOINT_LOAD || + info->ctrl.type == ARM_BREAKPOINT_STORE)) + return -EINVAL; } + out: return ret; } @@ -706,10 +729,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr, goto unlock; /* Check that the access type matches. */ - access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W : - HW_BREAKPOINT_R; - if (!(access & hw_breakpoint_type(wp))) - goto unlock; + if (debug_exception_updates_fsr()) { + access = (fsr & ARM_FSR_ACCESS_MASK) ? + HW_BREAKPOINT_W : HW_BREAKPOINT_R; + if (!(access & hw_breakpoint_type(wp))) + goto unlock; + } /* We have a winner. */ info->trigger = addr; diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index f4515393248d..63bc22c88507 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -89,11 +89,11 @@ static void notrace update_sched_clock(void) * detectable in cyc_to_fixed_sched_clock(). */ raw_local_irq_save(flags); - cd.epoch_cyc = cyc; + cd.epoch_cyc_copy = cyc; smp_wmb(); cd.epoch_ns = ns; smp_wmb(); - cd.epoch_cyc_copy = cyc; + cd.epoch_cyc = cyc; raw_local_irq_restore(flags); } diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 429d995a7981..998d5c9682ff 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -345,18 +345,24 @@ static void percpu_timer_setup(void); asmlinkage void __cpuinit secondary_start_kernel(void) { struct mm_struct *mm = &init_mm; - unsigned int cpu = smp_processor_id(); + unsigned int cpu; + + /* + * The identity mapping is uncached (strongly ordered), so + * switch away from it before attempting any exclusive accesses. + */ + cpu_switch_mm(mm->pgd, mm); + enter_lazy_tlb(mm, current); + local_flush_tlb_all(); /* * All kernel threads share the same mm context; grab a * reference and switch to it. */ + cpu = smp_processor_id(); atomic_inc(&mm->mm_count); current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); - cpu_switch_mm(mm->pgd, mm); - enter_lazy_tlb(mm, current); - local_flush_tlb_all(); cpu_init(); preempt_disable(); diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index df745188f5de..ab1017bd1667 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -109,10 +109,12 @@ static void set_segfault(struct pt_regs *regs, unsigned long addr) { siginfo_t info; + down_read(¤t->mm->mmap_sem); if (find_vma(current->mm, addr) == NULL) info.si_code = SEGV_MAPERR; else info.si_code = SEGV_ACCERR; + up_read(¤t->mm->mmap_sem); info.si_signo = SIGSEGV; info.si_errno = 0; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index c7cae6b9a4d9..eeb752093a56 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -388,20 +388,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) #endif instr = *(u32 *) pc; } else if (thumb_mode(regs)) { - get_user(instr, (u16 __user *)pc); + if (get_user(instr, (u16 __user *)pc)) + goto die_sig; if (is_wide_instruction(instr)) { unsigned int instr2; - get_user(instr2, (u16 __user *)pc+1); + if (get_user(instr2, (u16 __user *)pc+1)) + goto die_sig; instr <<= 16; instr |= instr2; } - } else { - get_user(instr, (u32 __user *)pc); + } else if (get_user(instr, (u32 __user *)pc)) { + goto die_sig; } if (call_undef_hook(regs, instr) == 0) return; +die_sig: #ifdef CONFIG_DEBUG_USER if (user_debug & UDBG_UNDEFINED) { printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n", diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 11093a7c3e32..9b06bb41fca6 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -16,8 +16,9 @@ * __get_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * Outputs: r0 is the error code - * r2, r3 contains the zero-extended value + * r2 contains the zero-extended value * lr corrupted * * No other registers must be altered. (see <asm/uaccess.h> @@ -27,33 +28,39 @@ * Note also that it is intended that __get_user_bad is not global. */ #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/errno.h> #include <asm/domain.h> ENTRY(__get_user_1) + check_uaccess r0, 1, r1, r2, __get_user_bad 1: TUSER(ldrb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__get_user_1) ENTRY(__get_user_2) -#ifdef CONFIG_THUMB2_KERNEL -2: TUSER(ldrb) r2, [r0] -3: TUSER(ldrb) r3, [r0, #1] + check_uaccess r0, 2, r1, r2, __get_user_bad +#ifdef CONFIG_CPU_USE_DOMAINS +rb .req ip +2: ldrbt r2, [r0], #1 +3: ldrbt rb, [r0], #0 #else -2: TUSER(ldrb) r2, [r0], #1 -3: TUSER(ldrb) r3, [r0] +rb .req r0 +2: ldrb r2, [r0] +3: ldrb rb, [r0, #1] #endif #ifndef __ARMEB__ - orr r2, r2, r3, lsl #8 + orr r2, r2, rb, lsl #8 #else - orr r2, r3, r2, lsl #8 + orr r2, rb, r2, lsl #8 #endif mov r0, #0 mov pc, lr ENDPROC(__get_user_2) ENTRY(__get_user_4) + check_uaccess r0, 4, r1, r2, __get_user_bad 4: TUSER(ldr) r2, [r0] mov r0, #0 mov pc, lr diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 7db25990c589..3d73dcb959b0 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -16,6 +16,7 @@ * __put_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * r2, r3 contains the value * Outputs: r0 is the error code * lr corrupted @@ -27,16 +28,19 @@ * Note also that it is intended that __put_user_bad is not global. */ #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/errno.h> #include <asm/domain.h> ENTRY(__put_user_1) + check_uaccess r0, 1, r1, ip, __put_user_bad 1: TUSER(strb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_1) ENTRY(__put_user_2) + check_uaccess r0, 2, r1, ip, __put_user_bad mov ip, r2, lsr #8 #ifdef CONFIG_THUMB2_KERNEL #ifndef __ARMEB__ @@ -60,12 +64,14 @@ ENTRY(__put_user_2) ENDPROC(__put_user_2) ENTRY(__put_user_4) + check_uaccess r0, 4, r1, ip, __put_user_bad 4: TUSER(str) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_4) ENTRY(__put_user_8) + check_uaccess r0, 8, r1, ip, __put_user_bad #ifdef CONFIG_THUMB2_KERNEL 5: TUSER(str) r2, [r0] 6: TUSER(str) r3, [r0, #4] diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 05774e5b1cba..3b0c719f9fe9 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -463,7 +463,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91rm9200_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 5652dde4bbe2..151fec4ccf2f 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -468,7 +468,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9260_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 4db961a93085..8a29c6cbe08c 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -285,7 +285,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9261_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index fe99206de880..8d443225266e 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -542,7 +542,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9263_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index fe4ae22e8561..b8d4114ea228 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -314,7 +314,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9rl_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index f44a2e7272e3..55293a78cfac 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -104,6 +104,8 @@ static void __init soc_detect(u32 dbgu_base) switch (socid) { case ARCH_ID_AT91RM9200: at91_soc_initdata.type = AT91_SOC_RM9200; + if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE) + at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; at91_boot_soc = at91rm9200_soc; break; @@ -146,7 +148,7 @@ static void __init soc_detect(u32 dbgu_base) } /* at91sam9g10 */ - if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { + if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { at91_soc_initdata.type = AT91_SOC_SAM9G10; at91_boot_soc = at91sam9261_soc; } diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h index 3ad9f946a9e8..11799c33475e 100644 --- a/arch/arm/mach-dove/include/mach/pm.h +++ b/arch/arm/mach-dove/include/mach/pm.h @@ -45,7 +45,7 @@ static inline int pmu_to_irq(int pin) static inline int irq_to_pmu(int irq) { - if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS) + if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS) return irq - IRQ_DOVE_PMU_START; return -EINVAL; diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index f07fd16e0c9b..9f2fd1001746 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -61,8 +61,20 @@ static void pmu_irq_ack(struct irq_data *d) int pin = irq_to_pmu(d->irq); u32 u; + /* + * The PMU mask register is not RW0C: it is RW. This means that + * the bits take whatever value is written to them; if you write + * a '1', you will set the interrupt. + * + * Unfortunately this means there is NO race free way to clear + * these interrupts. + * + * So, let's structure the code so that the window is as small as + * possible. + */ u = ~(1 << (pin & 31)); - writel(u, PMU_INTERRUPT_CAUSE); + u &= readl_relaxed(PMU_INTERRUPT_CAUSE); + writel_relaxed(u, PMU_INTERRUPT_CAUSE); } static struct irq_chip pmu_irq_chip = { diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 692c6e22523b..0291508a2dee 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void) : "cc"); } -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - /* * platform-specific code to shutdown a CPU * @@ -67,9 +51,8 @@ void imx_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); imx_enable_cpu(cpu, false); - cpu_do_idle(); - cpu_leave_lowpower(); - /* We should never return from idle */ - panic("cpu %d unexpectedly exit from shutdown\n", cpu); + /* spin here until hardware takes it down */ + while (1) + ; } diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index f56a0118c1bb..c46d20e5f3fd 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -212,14 +212,19 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) return 1; } +/* + * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it + * is operating as a root complex this needs to be switched to + * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on + * the device. Decoding setup is handled by the orion code. + */ static void __devinit rc_pci_fixup(struct pci_dev *dev) { - /* - * Prevent enumeration of root complex. - */ if (dev->bus->parent == NULL && dev->devfn == 0) { int i; + dev->class &= 0xff; + dev->class |= PCI_CLASS_BRIDGE_HOST << 8; for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { dev->resource[i].start = 0; dev->resource[i].end = 0; diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h index a65867209aa0..b4eb3daf037b 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h @@ -462,6 +462,9 @@ GPIO76_LCD_PCLK, \ GPIO77_LCD_BIAS +/* these enable a work-around for a hw bug in pxa27x during ac97 warm reset */ +#define GPIO113_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO113, AF0, DEFAULT) +#define GPIO95_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO95, AF0, DEFAULT) extern int keypad_set_wake(unsigned int on); #endif /* __ASM_ARCH_MFP_PXA27X_H */ diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h index b7de471b273a..b802f285fe00 100644 --- a/arch/arm/mach-pxa/include/mach/smemc.h +++ b/arch/arm/mach-pxa/include/mach/smemc.h @@ -37,6 +37,7 @@ #define CSADRCFG1 (SMEMC_VIRT + 0x84) /* Address Configuration Register for CS1 */ #define CSADRCFG2 (SMEMC_VIRT + 0x88) /* Address Configuration Register for CS2 */ #define CSADRCFG3 (SMEMC_VIRT + 0x8C) /* Address Configuration Register for CS3 */ +#define CSMSADRCFG (SMEMC_VIRT + 0xA0) /* Chip Select Configuration Register */ /* * More handy macros for PCMCIA diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 4726c246dcdc..a2fe795bae14 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -47,9 +47,9 @@ void pxa27x_clear_otgph(void) EXPORT_SYMBOL(pxa27x_clear_otgph); static unsigned long ac97_reset_config[] = { - GPIO113_GPIO, + GPIO113_AC97_nRESET_GPIO_HIGH, GPIO113_AC97_nRESET, - GPIO95_GPIO, + GPIO95_AC97_nRESET_GPIO_HIGH, GPIO95_AC97_nRESET, }; diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c index 79923058d10f..f38aa890b2c9 100644 --- a/arch/arm/mach-pxa/smemc.c +++ b/arch/arm/mach-pxa/smemc.c @@ -40,6 +40,8 @@ static void pxa3xx_smemc_resume(void) __raw_writel(csadrcfg[1], CSADRCFG1); __raw_writel(csadrcfg[2], CSADRCFG2); __raw_writel(csadrcfg[3], CSADRCFG3); + /* CSMSADRCFG wakes up in its default state (0), so we need to set it */ + __raw_writel(0x2, CSMSADRCFG); } static struct syscore_ops smemc_syscore_ops = { @@ -49,8 +51,19 @@ static struct syscore_ops smemc_syscore_ops = { static int __init smemc_init(void) { - if (cpu_is_pxa3xx()) + if (cpu_is_pxa3xx()) { + /* + * The only documentation we have on the + * Chip Select Configuration Register (CSMSADRCFG) is that + * it must be programmed to 0x2. + * Moreover, in the bit definitions, the second bit + * (CSMSADRCFG[1]) is called "SETALWAYS". + * Other bits are reserved in this register. + */ + __raw_writel(0x2, CSMSADRCFG); + register_syscore_ops(&smemc_syscore_ops); + } return 0; } diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h index 124bce6b4d7b..a301e61a5554 100644 --- a/arch/arm/mach-realview/include/mach/board-eb.h +++ b/arch/arm/mach-realview/include/mach/board-eb.h @@ -47,7 +47,7 @@ #define REALVIEW_EB_USB_BASE 0x4F000000 /* USB */ #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB -#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x1F000000 +#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x10100000 #define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */ #define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */ #else diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S index 4135de87d1f7..13ed33c69113 100644 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S @@ -40,17 +40,17 @@ addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) bic \rd, \rd, #0xff000 - ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] + ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)] and \rd, \rd, #0x00ff0000 teq \rd, #0x00440000 @ is it 2440? 1004: - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] moveq \rd, \rd, lsr #SHIFT_2440TXF tst \rd, #S3C2410_UFSTAT_TXFULL .endm .macro fifo_full_s3c2410 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] tst \rd, #S3C2410_UFSTAT_TXFULL .endm @@ -68,18 +68,18 @@ addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) bic \rd, \rd, #0xff000 - ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] + ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)] and \rd, \rd, #0x00ff0000 teq \rd, #0x00440000 @ is it 2440? 10000: - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] andne \rd, \rd, #S3C2410_UFSTAT_TXMASK andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK .endm .macro fifo_level_s3c2410 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] and \rd, \rd, #S3C2410_UFSTAT_TXMASK .endm diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index acbdfecd4186..ccaaafc65c12 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,8 @@ */ enum dma_ch { - DMACH_XD0, + DMACH_DT_PROP = -1, /* not yet supported, do not use */ + DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, DMACH_SPI0, diff --git a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S index 7615a14773fa..6a21beeba1da 100644 --- a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S @@ -31,10 +31,10 @@ @@ try the interrupt offset register, since it is there - ldr \irqstat, [ \base, #INTPND ] + ldr \irqstat, [\base, #INTPND ] teq \irqstat, #0 beq 1002f - ldr \irqnr, [ \base, #INTOFFSET ] + ldr \irqnr, [\base, #INTOFFSET ] mov \tmp, #1 tst \irqstat, \tmp, lsl \irqnr bne 1001f diff --git a/arch/arm/mach-s3c24xx/pm-h1940.S b/arch/arm/mach-s3c24xx/pm-h1940.S index c93bf2db9f4d..6183a688012b 100644 --- a/arch/arm/mach-s3c24xx/pm-h1940.S +++ b/arch/arm/mach-s3c24xx/pm-h1940.S @@ -30,4 +30,4 @@ h1940_pm_return: mov r0, #S3C2410_PA_GPIO - ldr pc, [ r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO ] + ldr pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO] diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S index dd5b6388a5a5..65200ae72c90 100644 --- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S @@ -45,9 +45,9 @@ ENTRY(s3c2410_cpu_suspend) ldr r4, =S3C2410_REFRESH ldr r5, =S3C24XX_MISCCR ldr r6, =S3C2410_CLKCON - ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB) - ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB) - ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB) + ldr r7, [r4] @ get REFRESH (and ensure in TLB) + ldr r8, [r5] @ get MISCCR (and ensure in TLB) + ldr r9, [r6] @ get CLKCON (and ensure in TLB) orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals @@ -61,8 +61,8 @@ ENTRY(s3c2410_cpu_suspend) @@ align next bit of code to cache line .align 5 s3c2410_do_sleep: - streq r7, [ r4 ] @ SDRAM sleep command - streq r8, [ r5 ] @ SDRAM power-down config - streq r9, [ r6 ] @ CPU sleep + streq r7, [r4] @ SDRAM sleep command + streq r8, [r5] @ SDRAM power-down config + streq r9, [r6] @ CPU sleep 1: beq 1b mov pc, r14 diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2412.S b/arch/arm/mach-s3c24xx/sleep-s3c2412.S index c82418ed714d..5adaceb7da13 100644 --- a/arch/arm/mach-s3c24xx/sleep-s3c2412.S +++ b/arch/arm/mach-s3c24xx/sleep-s3c2412.S @@ -57,12 +57,12 @@ s3c2412_sleep_enter1: * retry, as simply returning causes the system to lock. */ - ldrne r9, [ r1 ] - strne r9, [ r1 ] - ldrne r9, [ r2 ] - strne r9, [ r2 ] - ldrne r9, [ r3 ] - strne r9, [ r3 ] + ldrne r9, [r1] + strne r9, [r1] + ldrne r9, [r2] + strne r9, [r2] + ldrne r9, [r3] + strne r9, [r3] bne s3c2412_sleep_enter1 mov pc, r14 diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 28ca7c259815..a6571368900e 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -783,25 +783,27 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir, void (*op)(const void *, size_t, int)) { + unsigned long pfn; + size_t left = size; + + pfn = page_to_pfn(page) + offset / PAGE_SIZE; + offset %= PAGE_SIZE; + /* * A single sg entry may refer to multiple physically contiguous * pages. But we still need to process highmem pages individually. * If highmem is not configured then the bulk of this loop gets * optimized out. */ - size_t left = size; do { size_t len = left; void *vaddr; + page = pfn_to_page(pfn); + if (PageHighMem(page)) { - if (len + offset > PAGE_SIZE) { - if (offset >= PAGE_SIZE) { - page += offset / PAGE_SIZE; - offset %= PAGE_SIZE; - } + if (len + offset > PAGE_SIZE) len = PAGE_SIZE - offset; - } vaddr = kmap_high_get(page); if (vaddr) { vaddr += offset; @@ -818,7 +820,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, op(vaddr, len, dir); } offset = 0; - page++; + pfn++; left -= len; } while (left); } diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 77458548e031..40ca11ed6e5f 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -231,8 +231,6 @@ void __sync_icache_dcache(pte_t pteval) struct page *page; struct address_space *mapping; - if (!pte_present_user(pteval)) - return; if (cache_is_vipt_nonaliasing() && !pte_exec(pteval)) /* only flush non-aliasing VIPT caches for exec mappings */ return; diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index d9b47a1b97af..1f53fe46183d 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -55,6 +55,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page /* permanent static mappings from iotable_init() */ #define VM_ARM_STATIC_MAPPING 0x40000000 +/* empty mapping */ +#define VM_ARM_EMPTY_MAPPING 0x20000000 + /* mapping type (attributes) for permanent static mappings */ #define VM_ARM_MTYPE(mt) ((mt) << 20) #define VM_ARM_MTYPE_MASK (0x1f << 20) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index b40aaac684ad..0439314e681d 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -498,7 +498,7 @@ static void __init build_mem_type_table(void) #endif for (i = 0; i < 16; i++) { - unsigned long v = pgprot_val(protection_map[i]); + pteval_t v = pgprot_val(protection_map[i]); protection_map[i] = __pgprot(v | user_pgprot); } @@ -840,7 +840,7 @@ static void __init pmd_empty_section_gap(unsigned long addr) vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm)); vm->addr = (void *)addr; vm->size = SECTION_SIZE; - vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; + vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING; vm->caller = pmd_empty_section_gap; vm_area_add_early(vm); } @@ -853,7 +853,7 @@ static void __init fill_pmd_gaps(void) /* we're still single threaded hence no lock needed here */ for (vm = vmlist; vm; vm = vm->next) { - if (!(vm->flags & VM_ARM_STATIC_MAPPING)) + if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING))) continue; addr = (unsigned long)vm->addr; if (addr < next) diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index c2021139cb56..ea94765acf9a 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -38,10 +38,10 @@ ENTRY(v7wbi_flush_user_tlb_range) dsb mov r0, r0, lsr #PAGE_SHIFT @ align address mov r1, r1, lsr #PAGE_SHIFT -#ifdef CONFIG_ARM_ERRATA_720789 - mov r3, #0 -#else asid r3, r3 @ mask ASID +#ifdef CONFIG_ARM_ERRATA_720789 + ALT_SMP(W(mov) r3, #0 ) + ALT_UP(W(nop) ) #endif orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA mov r1, r1, lsl #PAGE_SHIFT diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 5068fe5a6910..fd433e7a25fd 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -50,22 +50,29 @@ static u32 notrace omap_32k_read_sched_clock(void) * nsecs and adds to a monotonically increasing timespec. */ static struct timespec persistent_ts; -static cycles_t cycles, last_cycles; +static cycles_t cycles; static unsigned int persistent_mult, persistent_shift; +static DEFINE_SPINLOCK(read_persistent_clock_lock); + void read_persistent_clock(struct timespec *ts) { unsigned long long nsecs; - cycles_t delta; - struct timespec *tsp = &persistent_ts; + cycles_t last_cycles; + unsigned long flags; + + spin_lock_irqsave(&read_persistent_clock_lock, flags); last_cycles = cycles; cycles = timer_32k_base ? __raw_readl(timer_32k_base) : 0; - delta = cycles - last_cycles; - nsecs = clocksource_cyc2ns(delta, persistent_mult, persistent_shift); + nsecs = clocksource_cyc2ns(cycles - last_cycles, + persistent_mult, persistent_shift); + + timespec_add_ns(&persistent_ts, nsecs); + + *ts = persistent_ts; - timespec_add_ns(tsp, nsecs); - *ts = *tsp; + spin_unlock_irqrestore(&read_persistent_clock_lock, flags); } int __init omap_init_clocksource_32k(void) diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 652139c0339e..7ac301ee283c 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -238,7 +238,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable); void omap_dm_timer_disable(struct omap_dm_timer *timer) { - pm_runtime_put(&timer->pdev->dev); + pm_runtime_put_sync(&timer->pdev->dev); } EXPORT_SYMBOL_GPL(omap_dm_timer_disable); diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 28f898f75380..db98e7021f0d 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) * when necessary. */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S index 207e275362a8..f3a9cff6d5d4 100644 --- a/arch/arm/plat-samsung/include/plat/debug-macro.S +++ b/arch/arm/plat-samsung/include/plat/debug-macro.S @@ -14,12 +14,12 @@ /* The S5PV210/S5PC110 implementations are as belows. */ .macro fifo_level_s5pv210 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] and \rd, \rd, #S5PV210_UFSTAT_TXMASK .endm .macro fifo_full_s5pv210 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] tst \rd, #S5PV210_UFSTAT_TXFULL .endm @@ -27,7 +27,7 @@ * most widely re-used */ .macro fifo_level_s3c2440 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] and \rd, \rd, #S3C2440_UFSTAT_TXMASK .endm @@ -36,7 +36,7 @@ #endif .macro fifo_full_s3c2440 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] + ldr \rd, [\rx, # S3C2410_UFSTAT] tst \rd, #S3C2440_UFSTAT_TXFULL .endm @@ -45,11 +45,11 @@ #endif .macro senduart,rd,rx - strb \rd, [\rx, # S3C2410_UTXH ] + strb \rd, [\rx, # S3C2410_UTXH] .endm .macro busyuart, rd, rx - ldr \rd, [ \rx, # S3C2410_UFCON ] + ldr \rd, [\rx, # S3C2410_UFCON] tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? beq 1001f @ @ FIFO enabled... @@ -60,7 +60,7 @@ 1001: @ busy waiting for non fifo - ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + ldr \rd, [\rx, # S3C2410_UTRSTAT] tst \rd, #S3C2410_UTRSTAT_TXFE beq 1001b @@ -68,7 +68,7 @@ .endm .macro waituart,rd,rx - ldr \rd, [ \rx, # S3C2410_UFCON ] + ldr \rd, [\rx, # S3C2410_UFCON] tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? beq 1001f @ @ FIFO enabled... @@ -79,7 +79,7 @@ b 1002f 1001: @ idle waiting for non fifo - ldr \rd, [ \rx, # S3C2410_UTRSTAT ] + ldr \rd, [\rx, # S3C2410_UTRSTAT] tst \rd, #S3C2410_UTRSTAT_TXFE beq 1001b diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 7788327044ff..50a724a8334d 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -22,7 +22,7 @@ @ IRQs disabled. @ ENTRY(do_vfp) -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPT_COUNT ldr r4, [r10, #TI_PREEMPT] @ get preempt count add r11, r4, #1 @ increment it str r11, [r10, #TI_PREEMPT] @@ -36,7 +36,7 @@ ENTRY(do_vfp) ENDPROC(do_vfp) ENTRY(vfp_null_entry) -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPT_COUNT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count sub r11, r4, #1 @ decrement it @@ -54,7 +54,7 @@ ENDPROC(vfp_null_entry) __INIT ENTRY(vfp_testing_entry) -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPT_COUNT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count sub r11, r4, #1 @ decrement it diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 3a0efaad6090..6ff903e50199 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -167,7 +167,7 @@ vfp_hw_state_valid: @ else it's one 32-bit instruction, so @ always subtract 4 from the following @ instruction address. -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPT_COUNT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count sub r11, r4, #1 @ decrement it @@ -191,7 +191,7 @@ look_for_VFP_exceptions: @ not recognised by VFP DBGSTR "not VFP" -#ifdef CONFIG_PREEMPT +#ifdef CONFIG_PREEMPT_COUNT get_thread_info r10 ldr r4, [r10, #TI_PREEMPT] @ get preempt count sub r11, r4, #1 @ decrement it diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index b9510fb3ca11..eea6057b9ef1 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -717,11 +717,14 @@ static int __init vfp_init(void) elf_hwcap |= HWCAP_VFPv3; /* - * Check for VFPv3 D16. CPUs in this configuration - * only have 16 x 64bit registers. + * Check for VFPv3 D16 and VFPv4 D16. CPUs in + * this configuration only have 16 x 64bit + * registers. */ if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1) - elf_hwcap |= HWCAP_VFPv3D16; + elf_hwcap |= HWCAP_VFPv3D16; /* also v4-D16 */ + else + elf_hwcap |= HWCAP_VFPD32; } #endif /* @@ -735,8 +738,10 @@ static int __init vfp_init(void) if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100) elf_hwcap |= HWCAP_NEON; #endif +#ifdef CONFIG_VFPv3 if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000) elf_hwcap |= HWCAP_VFPv4; +#endif } } return 0; |