diff options
Diffstat (limited to 'arch/avr32/kernel/time.c')
-rw-r--r-- | arch/avr32/kernel/time.c | 248 |
1 files changed, 85 insertions, 163 deletions
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index 36a46c3ae308..00a9862380ff 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -1,16 +1,12 @@ /* * Copyright (C) 2004-2007 Atmel Corporation * - * Based on MIPS implementation arch/mips/kernel/time.c - * Copyright 2001 MontaVista Software Inc. - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - #include <linux/clk.h> -#include <linux/clocksource.h> +#include <linux/clockchips.h> #include <linux/time.h> #include <linux/module.h> #include <linux/interrupt.h> @@ -27,207 +23,133 @@ #include <asm/io.h> #include <asm/sections.h> -/* how many counter cycles in a jiffy? */ -static u32 cycles_per_jiffy; +#include <asm/arch/pm.h> -/* the count value for the next timer interrupt */ -static u32 expirelo; -cycle_t __weak read_cycle_count(void) +static cycle_t read_cycle_count(void) { return (cycle_t)sysreg_read(COUNT); } -struct clocksource __weak clocksource_avr32 = { - .name = "avr32", - .rating = 350, +/* + * The architectural cycle count registers are a fine clocksource unless + * the system idle loop use sleep states like "idle": the CPU cycles + * measured by COUNT (and COMPARE) don't happen during sleep states. + * Their duration also changes if cpufreq changes the CPU clock rate. + * So we rate the clocksource using COUNT as very low quality. + */ +static struct clocksource counter = { + .name = "avr32_counter", + .rating = 50, .read = read_cycle_count, .mask = CLOCKSOURCE_MASK(32), .shift = 16, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -irqreturn_t __weak timer_interrupt(int irq, void *dev_id); - -struct irqaction timer_irqaction = { - .handler = timer_interrupt, - .flags = IRQF_DISABLED, - .name = "timer", -}; - -/* - * By default we provide the null RTC ops - */ -static unsigned long null_rtc_get_time(void) +static irqreturn_t timer_interrupt(int irq, void *dev_id) { - return mktime(2007, 1, 1, 0, 0, 0); -} - -static int null_rtc_set_time(unsigned long sec) -{ - return 0; -} + struct clock_event_device *evdev = dev_id; -static unsigned long (*rtc_get_time)(void) = null_rtc_get_time; -static int (*rtc_set_time)(unsigned long) = null_rtc_set_time; - -static void avr32_timer_ack(void) -{ - u32 count; - - /* Ack this timer interrupt and set the next one */ - expirelo += cycles_per_jiffy; - /* setting COMPARE to 0 stops the COUNT-COMPARE */ - if (expirelo == 0) { - sysreg_write(COMPARE, expirelo + 1); - } else { - sysreg_write(COMPARE, expirelo); - } + /* + * Disable the interrupt until the clockevent subsystem + * reprograms it. + */ + sysreg_write(COMPARE, 0); - /* Check to see if we have missed any timer interrupts */ - count = sysreg_read(COUNT); - if ((count - expirelo) < 0x7fffffff) { - expirelo = count + cycles_per_jiffy; - sysreg_write(COMPARE, expirelo); - } + evdev->event_handler(evdev); + return IRQ_HANDLED; } -int __weak avr32_hpt_init(void) -{ - int ret; - unsigned long mult, shift, count_hz; - - count_hz = clk_get_rate(boot_cpu_data.clk); - shift = clocksource_avr32.shift; - mult = clocksource_hz2mult(count_hz, shift); - clocksource_avr32.mult = mult; - - { - u64 tmp; - - tmp = TICK_NSEC; - tmp <<= shift; - tmp += mult / 2; - do_div(tmp, mult); - - cycles_per_jiffy = tmp; - } +static struct irqaction timer_irqaction = { + .handler = timer_interrupt, + .flags = IRQF_TIMER | IRQF_DISABLED, + .name = "avr32_comparator", +}; - ret = setup_irq(0, &timer_irqaction); - if (ret) { - pr_debug("timer: could not request IRQ 0: %d\n", ret); - return -ENODEV; - } +static int comparator_next_event(unsigned long delta, + struct clock_event_device *evdev) +{ + unsigned long flags; - printk(KERN_INFO "timer: AT32AP COUNT-COMPARE at irq 0, " - "%lu.%03lu MHz\n", - ((count_hz + 500) / 1000) / 1000, - ((count_hz + 500) / 1000) % 1000); + raw_local_irq_save(flags); - return 0; -} + /* The time to read COUNT then update COMPARE must be less + * than the min_delta_ns value for this clockevent source. + */ + sysreg_write(COMPARE, (sysreg_read(COUNT) + delta) ? : 1); -/* - * Taken from MIPS c0_hpt_timer_init(). - * - * The reason COUNT is written twice is probably to make sure we don't get any - * timer interrupts while we are messing with the counter. - */ -int __weak avr32_hpt_start(void) -{ - u32 count = sysreg_read(COUNT); - expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy; - sysreg_write(COUNT, expirelo - cycles_per_jiffy); - sysreg_write(COMPARE, expirelo); - sysreg_write(COUNT, count); + raw_local_irq_restore(flags); return 0; } -/* - * local_timer_interrupt() does profiling and process accounting on a - * per-CPU basis. - * - * In UP mode, it is invoked from the (global) timer_interrupt. - */ -void local_timer_interrupt(int irq, void *dev_id) +static void comparator_mode(enum clock_event_mode mode, + struct clock_event_device *evdev) { - if (current->pid) - profile_tick(CPU_PROFILING); - update_process_times(user_mode(get_irq_regs())); + switch (mode) { + case CLOCK_EVT_MODE_ONESHOT: + pr_debug("%s: start\n", evdev->name); + /* FALLTHROUGH */ + case CLOCK_EVT_MODE_RESUME: + cpu_disable_idle_sleep(); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + sysreg_write(COMPARE, 0); + pr_debug("%s: stop\n", evdev->name); + cpu_enable_idle_sleep(); + break; + default: + BUG(); + } } -irqreturn_t __weak timer_interrupt(int irq, void *dev_id) -{ - /* ack timer interrupt and try to set next interrupt */ - avr32_timer_ack(); - - /* - * Call the generic timer interrupt handler - */ - write_seqlock(&xtime_lock); - do_timer(1); - write_sequnlock(&xtime_lock); - - /* - * In UP mode, we call local_timer_interrupt() to do profiling - * and process accounting. - * - * SMP is not supported yet. - */ - local_timer_interrupt(irq, dev_id); - - return IRQ_HANDLED; -} +static struct clock_event_device comparator = { + .name = "avr32_comparator", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 16, + .rating = 50, + .cpumask = CPU_MASK_CPU0, + .set_next_event = comparator_next_event, + .set_mode = comparator_mode, +}; void __init time_init(void) { + unsigned long counter_hz; int ret; - /* - * Make sure we don't get any COMPARE interrupts before we can - * handle them. - */ - sysreg_write(COMPARE, 0); - - xtime.tv_sec = rtc_get_time(); + xtime.tv_sec = mktime(2007, 1, 1, 0, 0, 0); xtime.tv_nsec = 0; set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); - ret = avr32_hpt_init(); - if (ret) { - pr_debug("timer: failed setup: %d\n", ret); - return; - } + /* figure rate for counter */ + counter_hz = clk_get_rate(boot_cpu_data.clk); + counter.mult = clocksource_hz2mult(counter_hz, counter.shift); - ret = clocksource_register(&clocksource_avr32); + ret = clocksource_register(&counter); if (ret) pr_debug("timer: could not register clocksource: %d\n", ret); - ret = avr32_hpt_start(); - if (ret) { - pr_debug("timer: failed starting: %d\n", ret); - return; - } -} + /* setup COMPARE clockevent */ + comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift); + comparator.max_delta_ns = clockevent_delta2ns((u32)~0, &comparator); + comparator.min_delta_ns = clockevent_delta2ns(50, &comparator) + 1; -static struct sysdev_class timer_class = { - .name = "timer", -}; + sysreg_write(COMPARE, 0); + timer_irqaction.dev_id = &comparator; -static struct sys_device timer_device = { - .id = 0, - .cls = &timer_class, -}; + ret = setup_irq(0, &timer_irqaction); + if (ret) + pr_debug("timer: could not request IRQ 0: %d\n", ret); + else { + clockevents_register_device(&comparator); -static int __init init_timer_sysfs(void) -{ - int err = sysdev_class_register(&timer_class); - if (!err) - err = sysdev_register(&timer_device); - return err; + pr_info("%s: irq 0, %lu.%03lu MHz\n", comparator.name, + ((counter_hz + 500) / 1000) / 1000, + ((counter_hz + 500) / 1000) % 1000); + } } - -device_initcall(init_timer_sysfs); |