summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf533/boards
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf533/boards')
-rw-r--r--arch/blackfin/mach-bf533/boards/H8606.c33
-rw-r--r--arch/blackfin/mach-bf533/boards/blackstamp.c29
-rw-r--r--arch/blackfin/mach-bf533/boards/cm_bf533.c45
-rw-r--r--arch/blackfin/mach-bf533/boards/ezkit.c132
-rw-r--r--arch/blackfin/mach-bf533/boards/ip0x.c37
-rw-r--r--arch/blackfin/mach-bf533/boards/stamp.c60
6 files changed, 87 insertions, 249 deletions
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 6c2b47fe4fe4..43f43a095a99 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -1,32 +1,11 @@
/*
- * File: arch/blackfin/mach-bf533/H8606.c
- * Based on: arch/blackfin/mach-bf533/stamp.c
- * Author: Javier Herrero <jherrero@hvsistemas.es>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2007-2008 HV Sistemas S.L.
+ * Javier Herrero <jherrero@hvsistemas.es>
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created: 2007
- * Description: Board Info File for the HV Sistemas H8606 board
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc
- * Copyright 2007,2008 HV Sistemas S.L.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 8208d67e2c97..b580884848d4 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -1,16 +1,10 @@
/*
- * File: arch/blackfin/mach-bf533/blackstamp.c
- * Based on: arch/blackfin/mach-bf533/stamp.c
- * Author: Benjamin Matthews <bmat@lle.rochester.edu>
- * Aidan Williams <aidan@nicta.com.au>
+ * Board Info File for the BlackStamp
*
- * Created: 2008
- * Description: Board Info File for the BlackStamp
- *
- * Copyright 2005 National ICT Australia (NICTA)
* Copyright 2004-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
+ * 2008 Benjamin Matthews <bmat@lle.rochester.edu>
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
* More info about the BlackStamp at:
* http://blackfin.uclinux.org/gf/project/blackstamp/
@@ -281,19 +275,6 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#include <linux/i2c-gpio.h>
@@ -384,8 +365,6 @@ static struct platform_device *stamp_devices[] __initdata = {
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
&i2c_gpio_device,
#endif
-
- &bfin_gpios_device,
};
static int __init blackstamp_init(void)
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 7443b26c80c5..7fc3b860d4ae 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -1,30 +1,10 @@
/*
- * File: arch/blackfin/mach-bf533/boards/cm_bf533.c
- * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au> Copyright 2005
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2008-2009 Bluetechnix
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created: 2005
- * Description: Board description file
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
@@ -261,19 +241,6 @@ static struct platform_device smsc911x_device = {
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
{
@@ -506,8 +473,6 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
&para_flash_device,
#endif
-
- &bfin_gpios_device,
};
static int __init cm_bf533_init(void)
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index fd518e383b79..d4689dcc198e 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -1,31 +1,9 @@
/*
- * File: arch/blackfin/mach-bf533/ezkit.c
- * Based on: Original Work
- * Author: Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created: 2005
- * Description:
- *
- * Modified: Robin Getz <rgetz@blackfin.uclinux.org> - Named the boards
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
@@ -33,12 +11,14 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h>
+#include <linux/i2c.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
@@ -56,12 +36,6 @@ static struct platform_device rtc_device = {
};
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
- .name = "bfin-adv7393",
-};
-#endif
-
/*
* USB-LAN EzExtender board
* Driver needs to know address, irq and flag pin.
@@ -98,54 +72,69 @@ static struct platform_device smc91x_device = {
};
#endif
-#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
-static const char *map_probes[] = {
- "stm_flash",
- NULL,
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezkit_partitions_a[] = {
+ {
+ .name = "bootloader(nor a)",
+ .size = 0x40000,
+ .offset = 0,
+ }, {
+ .name = "linux kernel(nor a)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
};
-static struct platdata_mtd_ram stm_pri_data_a = {
- .mapname = "Flash A Primary",
- .map_probes = map_probes,
- .bankwidth = 2,
+static struct physmap_flash_data ezkit_flash_data_a = {
+ .width = 2,
+ .parts = ezkit_partitions_a,
+ .nr_parts = ARRAY_SIZE(ezkit_partitions_a),
};
-static struct resource stm_pri_resource_a = {
+static struct resource ezkit_flash_resource_a = {
.start = 0x20000000,
.end = 0x200fffff,
.flags = IORESOURCE_MEM,
};
-static struct platform_device stm_pri_device_a = {
- .name = "mtd-ram",
+static struct platform_device ezkit_flash_device_a = {
+ .name = "physmap-flash",
.id = 0,
.dev = {
- .platform_data = &stm_pri_data_a,
+ .platform_data = &ezkit_flash_data_a,
},
.num_resources = 1,
- .resource = &stm_pri_resource_a,
+ .resource = &ezkit_flash_resource_a,
+};
+
+static struct mtd_partition ezkit_partitions_b[] = {
+ {
+ .name = "file system(nor b)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
};
-static struct platdata_mtd_ram stm_pri_data_b = {
- .mapname = "Flash B Primary",
- .map_probes = map_probes,
- .bankwidth = 2,
+static struct physmap_flash_data ezkit_flash_data_b = {
+ .width = 2,
+ .parts = ezkit_partitions_b,
+ .nr_parts = ARRAY_SIZE(ezkit_partitions_b),
};
-static struct resource stm_pri_resource_b = {
+static struct resource ezkit_flash_resource_b = {
.start = 0x20100000,
.end = 0x201fffff,
.flags = IORESOURCE_MEM,
};
-static struct platform_device stm_pri_device_b = {
- .name = "mtd-ram",
+static struct platform_device ezkit_flash_device_b = {
+ .name = "physmap-flash",
.id = 4,
.dev = {
- .platform_data = &stm_pri_data_b,
+ .platform_data = &ezkit_flash_data_b,
},
.num_resources = 1,
- .resource = &stm_pri_resource_b,
+ .resource = &ezkit_flash_resource_b,
};
#endif
@@ -400,19 +389,6 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#include <linux/i2c-gpio.h>
@@ -460,13 +436,21 @@ static struct platform_device bfin_dpmc = {
},
};
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+ {
+ I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+ },
+#endif
+};
+
static struct platform_device *ezkit_devices[] __initdata = {
&bfin_dpmc,
-#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
- &stm_pri_device_a,
- &stm_pri_device_b,
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+ &ezkit_flash_device_a,
+ &ezkit_flash_device_b,
#endif
#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
@@ -482,10 +466,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bfin_spi0_device,
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
- &bfin_fb_adv7393_device,
-#endif
-
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
#endif
@@ -507,8 +487,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
&i2c_gpio_device,
#endif
-
- &bfin_gpios_device,
};
static int __init ezkit_init(void)
@@ -516,6 +494,8 @@ static int __init ezkit_init(void)
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+ i2c_register_board_info(0, bfin_i2c_board_info,
+ ARRAY_SIZE(bfin_i2c_board_info));
return 0;
}
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index f19b63378b12..644be5e5ab6f 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -1,34 +1,12 @@
/*
- * File: arch/blackfin/mach-bf533/ip0x.c
- * Based on: arch/blackfin/mach-bf533/bf1.c
- * Based on: arch/blackfin/mach-bf533/stamp.c
- * Author: Ivan Danov <idanov@gmail.com>
- * Modified for IP0X David Rowe
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2007 David Rowe
+ * 2006 Intratrade Ltd.
+ * Ivan Danov <idanov@gmail.com>
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created: 2007
- * Description: Board info file for the IP04/IP08 boards, which
- * are derived from the BlackfinOne V2.0 boards.
- *
- * Modified:
- * COpyright 2007 David Rowe
- * Copyright 2006 Intratrade Ltd.
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
@@ -145,7 +123,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.ctl_reg = 0x1000, /* CPOL=0,CPHA=0,Sandisk 1G work */
.enable_dma = 0, /* if 1 - block!!! */
.bits_per_word = 8,
- .cs_change_per_word = 0,
};
#endif
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 729fd7c26336..82f70efd66e7 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -1,31 +1,9 @@
/*
- * File: arch/blackfin/mach-bf533/stamp.c
- * Based on: arch/blackfin/mach-bf533/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created: 2005
- * Description: Board Info File for the BF533-STAMP
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
@@ -95,12 +73,6 @@ static struct platform_device smc91x_device = {
};
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
- .name = "bfin-adv7393",
-};
-#endif
-
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
static struct resource net2272_bfin_resources[] = {
{
@@ -436,19 +408,6 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#include <linux/i2c-gpio.h>
@@ -487,6 +446,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
.irq = 39,
},
#endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+ {
+ I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+ },
+#endif
};
static const unsigned int cclk_vlev_datasheet[] =
@@ -528,10 +492,6 @@ static struct platform_device *stamp_devices[] __initdata = {
&smc91x_device,
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
- &bfin_fb_adv7393_device,
-#endif
-
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
&net2272_bfin_device,
#endif
@@ -563,8 +523,6 @@ static struct platform_device *stamp_devices[] __initdata = {
&i2c_gpio_device,
#endif
- &bfin_gpios_device,
-
#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
&stamp_flash_device,
#endif