diff options
Diffstat (limited to 'arch/blackfin/mach-bf548/head.S')
| -rw-r--r-- | arch/blackfin/mach-bf548/head.S | 125 |
1 files changed, 0 insertions, 125 deletions
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 937fbef26a51..532ed0930b5e 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -378,131 +378,6 @@ ENTRY(_start_dma_code) RTS; #endif /* CONFIG_BFIN_KERNEL_CLOCK */ -ENTRY(_bfin_reset) - /* No more interrupts to be handled*/ - CLI R6; - SSYNC; - -#if 0 /* Need to determine later if this is here necessary for BF54x */ -#if defined(CONFIG_MTD_M25P80) -/* - * The following code fix the SPI flash reboot issue, - * /CS signal of the chip which is using PF10 return to GPIO mode - */ - p0.h = hi(PORTF_FER); - p0.l = lo(PORTF_FER); - r0.l = 0x0000; - w[p0] = r0.l; - SSYNC; - -/* /CS return to high */ - p0.h = hi(PORTFIO); - p0.l = lo(PORTFIO); - r0.l = 0xFFFF; - w[p0] = r0.l; - SSYNC; - -/* Delay some time, This is necessary */ - r1.h = 0; - r1.l = 0x400; - p1 = r1; - lsetup (_delay_lab1,_delay_lab1_end ) lc1 = p1; -_delay_lab1: - r0.h = 0; - r0.l = 0x8000; - p0 = r0; - lsetup (_delay_lab0,_delay_lab0_end ) lc0 = p0; -_delay_lab0: - nop; -_delay_lab0_end: - nop; -_delay_lab1_end: - nop; -#endif -#endif - - /* Clear the bits 13-15 in SWRST if they werent cleared */ - p0.h = hi(SWRST); - p0.l = lo(SWRST); - csync; - r0.l = w[p0]; - - /* Clear the IMASK register */ - p0.h = hi(IMASK); - p0.l = lo(IMASK); - r0 = 0x0; - [p0] = r0; - - /* Clear the ILAT register */ - p0.h = hi(ILAT); - p0.l = lo(ILAT); - r0 = [p0]; - [p0] = r0; - SSYNC; - - /* Disable the WDOG TIMER */ - p0.h = hi(WDOG_CTL); - p0.l = lo(WDOG_CTL); - r0.l = 0xAD6; - w[p0] = r0.l; - SSYNC; - - /* Clear the sticky bit incase it is already set */ - p0.h = hi(WDOG_CTL); - p0.l = lo(WDOG_CTL); - r0.l = 0x8AD6; - w[p0] = r0.l; - SSYNC; - - /* Program the count value */ - R0.l = 0x100; - R0.h = 0x0; - P0.h = hi(WDOG_CNT); - P0.l = lo(WDOG_CNT); - [P0] = R0; - SSYNC; - - /* Program WDOG_STAT if necessary */ - P0.h = hi(WDOG_CTL); - P0.l = lo(WDOG_CTL); - R0 = W[P0](Z); - CC = BITTST(R0,1); - if !CC JUMP .LWRITESTAT; - CC = BITTST(R0,2); - if !CC JUMP .LWRITESTAT; - JUMP .LSKIP_WRITE; - -.LWRITESTAT: - /* When watch dog timer is enabled, - * a write to STAT will load the contents of CNT to STAT - */ - R0 = 0x0000(z); - P0.h = hi(WDOG_STAT); - P0.l = lo(WDOG_STAT) - [P0] = R0; - SSYNC; - -.LSKIP_WRITE: - /* Enable the reset event */ - P0.h = hi(WDOG_CTL); - P0.l = lo(WDOG_CTL); - R0 = W[P0](Z); - BITCLR(R0,1); - BITCLR(R0,2); - W[P0] = R0.L; - SSYNC; - NOP; - - /* Enable the wdog counter */ - R0 = W[P0](Z); - BITCLR(R0,4); - W[P0] = R0.L; - SSYNC; - - IDLE; - - RTS; - .data /* |