diff options
Diffstat (limited to 'arch/blackfin/mach-bf561/Kconfig')
| -rw-r--r-- | arch/blackfin/mach-bf561/Kconfig | 222 |
1 files changed, 222 insertions, 0 deletions
diff --git a/arch/blackfin/mach-bf561/Kconfig b/arch/blackfin/mach-bf561/Kconfig new file mode 100644 index 000000000000..0a17c4cf0059 --- /dev/null +++ b/arch/blackfin/mach-bf561/Kconfig @@ -0,0 +1,222 @@ +if BF561 + +menu "BF561 Specific Configuration" + +comment "Core B Support" + +menu "Core B Support" + +config BF561_COREB + bool "Enable Core B support" + default y + +config BF561_COREB_RESET + bool "Enable Core B reset support" + default n + help + This requires code in the application that is loaded + into Core B. In order to reset, the application needs + to install an interrupt handler for Supplemental + Interrupt 0, that sets RETI to 0xff600000 and writes + bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0. + This causes Core B to stall when Supplemental Interrupt + 0 is set, and will reset PC to 0xff600000 when + COREB_SRAM_INIT is cleared. + +endmenu + +comment "Interrupt Priority Assignment" + +menu "Priority" + +config IRQ_PLL_WAKEUP + int "PLL Wakeup Interrupt" + default 7 +config IRQ_DMA1_ERROR + int "DMA1 Error (generic)" + default 7 +config IRQ_DMA2_ERROR + int "DMA2 Error (generic)" + default 7 +config IRQ_IMDMA_ERROR + int "IMDMA Error (generic)" + default 7 +config IRQ_PPI0_ERROR + int "PPI0 Error Interrupt" + default 7 +config IRQ_PPI1_ERROR + int "PPI1 Error Interrupt" + default 7 +config IRQ_SPORT0_ERROR + int "SPORT0 Error Interrupt" + default 7 +config IRQ_SPORT1_ERROR + int "SPORT1 Error Interrupt" + default 7 +config IRQ_SPI_ERROR + int "SPI Error Interrupt" + default 7 +config IRQ_UART_ERROR + int "UART Error Interrupt" + default 7 +config IRQ_RESERVED_ERROR + int "Reserved Interrupt" + default 7 +config IRQ_DMA1_0 + int "DMA1 0 Interrupt(PPI1)" + default 8 +config IRQ_DMA1_1 + int "DMA1 1 Interrupt(PPI2)" + default 8 +config IRQ_DMA1_2 + int "DMA1 2 Interrupt" + default 8 +config IRQ_DMA1_3 + int "DMA1 3 Interrupt" + default 8 +config IRQ_DMA1_4 + int "DMA1 4 Interrupt" + default 8 +config IRQ_DMA1_5 + int "DMA1 5 Interrupt" + default 8 +config IRQ_DMA1_6 + int "DMA1 6 Interrupt" + default 8 +config IRQ_DMA1_7 + int "DMA1 7 Interrupt" + default 8 +config IRQ_DMA1_8 + int "DMA1 8 Interrupt" + default 8 +config IRQ_DMA1_9 + int "DMA1 9 Interrupt" + default 8 +config IRQ_DMA1_10 + int "DMA1 10 Interrupt" + default 8 +config IRQ_DMA1_11 + int "DMA1 11 Interrupt" + default 8 +config IRQ_DMA2_0 + int "DMA2 0 (SPORT0 RX)" + default 9 +config IRQ_DMA2_1 + int "DMA2 1 (SPORT0 TX)" + default 9 +config IRQ_DMA2_2 + int "DMA2 2 (SPORT1 RX)" + default 9 +config IRQ_DMA2_3 + int "DMA2 3 (SPORT2 TX)" + default 9 +config IRQ_DMA2_4 + int "DMA2 4 (SPI)" + default 9 +config IRQ_DMA2_5 + int "DMA2 5 (UART RX)" + default 9 +config IRQ_DMA2_6 + int "DMA2 6 (UART TX)" + default 9 +config IRQ_DMA2_7 + int "DMA2 7 Interrupt" + default 9 +config IRQ_DMA2_8 + int "DMA2 8 Interrupt" + default 9 +config IRQ_DMA2_9 + int "DMA2 9 Interrupt" + default 9 +config IRQ_DMA2_10 + int "DMA2 10 Interrupt" + default 9 +config IRQ_DMA2_11 + int "DMA2 11 Interrupt" + default 9 +config IRQ_TIMER0 + int "TIMER 0 Interrupt" + default 10 +config IRQ_TIMER1 + int "TIMER 1 Interrupt" + default 10 +config IRQ_TIMER2 + int "TIMER 2 Interrupt" + default 10 +config IRQ_TIMER3 + int "TIMER 3 Interrupt" + default 10 +config IRQ_TIMER4 + int "TIMER 4 Interrupt" + default 10 +config IRQ_TIMER5 + int "TIMER 5 Interrupt" + default 10 +config IRQ_TIMER6 + int "TIMER 6 Interrupt" + default 10 +config IRQ_TIMER7 + int "TIMER 7 Interrupt" + default 10 +config IRQ_TIMER8 + int "TIMER 8 Interrupt" + default 10 +config IRQ_TIMER9 + int "TIMER 9 Interrupt" + default 10 +config IRQ_TIMER10 + int "TIMER 10 Interrupt" + default 10 +config IRQ_TIMER11 + int "TIMER 11 Interrupt" + default 10 +config IRQ_PROG0_INTA + int "Programmable Flags0 A (8)" + default 11 +config IRQ_PROG0_INTB + int "Programmable Flags0 B (8)" + default 11 +config IRQ_PROG1_INTA + int "Programmable Flags1 A (8)" + default 11 +config IRQ_PROG1_INTB + int "Programmable Flags1 B (8)" + default 11 +config IRQ_PROG2_INTA + int "Programmable Flags2 A (8)" + default 11 +config IRQ_PROG2_INTB + int "Programmable Flags2 B (8)" + default 11 +config IRQ_DMA1_WRRD0 + int "MDMA1 0 write/read INT" + default 8 +config IRQ_DMA1_WRRD1 + int "MDMA1 1 write/read INT" + default 8 +config IRQ_DMA2_WRRD0 + int "MDMA2 0 write/read INT" + default 9 +config IRQ_DMA2_WRRD1 + int "MDMA2 1 write/read INT" + default 9 +config IRQ_IMDMA_WRRD0 + int "IMDMA 0 write/read INT" + default 12 +config IRQ_IMDMA_WRRD1 + int "IMDMA 1 write/read INT" + default 12 +config IRQ_WDTIMER + int "Watch Dog Timer" + default 13 + + help + Enter the priority numbers between 7-13 ONLY. Others are Reserved. + This applies to all the above. It is not recommended to assign the + highest priority number 7 to UART or any other device. + +endmenu + +endmenu + +endif |