diff options
Diffstat (limited to 'arch/blackfin/oprofile')
| -rw-r--r-- | arch/blackfin/oprofile/Kconfig | 29 | ||||
| -rw-r--r-- | arch/blackfin/oprofile/Makefile | 14 | ||||
| -rw-r--r-- | arch/blackfin/oprofile/common.c | 168 | ||||
| -rw-r--r-- | arch/blackfin/oprofile/op_blackfin.h | 98 | ||||
| -rw-r--r-- | arch/blackfin/oprofile/op_model_bf533.c | 161 | ||||
| -rw-r--r-- | arch/blackfin/oprofile/timer_int.c | 74 |
6 files changed, 544 insertions, 0 deletions
diff --git a/arch/blackfin/oprofile/Kconfig b/arch/blackfin/oprofile/Kconfig new file mode 100644 index 000000000000..0a2fd999c941 --- /dev/null +++ b/arch/blackfin/oprofile/Kconfig @@ -0,0 +1,29 @@ +menu "Profiling support" +depends on EXPERIMENTAL + +config PROFILING + bool "Profiling support (EXPERIMENTAL)" + help + Say Y here to enable the extended profiling support mechanisms used + by profilers such as OProfile. + +config OPROFILE + tristate "OProfile system profiling (EXPERIMENTAL)" + depends on PROFILING + help + OProfile is a profiling system capable of profiling the + whole system, include the kernel, kernel modules, libraries, + and applications. + + If unsure, say N. + +config HARDWARE_PM + tristate "Hardware Performance Monitor Profiling" + depends on PROFILING + help + take use of hardware performance monitor to profiling the kernel + and application. + + If unsure, say N. + +endmenu diff --git a/arch/blackfin/oprofile/Makefile b/arch/blackfin/oprofile/Makefile new file mode 100644 index 000000000000..634e300d67e2 --- /dev/null +++ b/arch/blackfin/oprofile/Makefile @@ -0,0 +1,14 @@ +# +# arch/blackfin/oprofile/Makefile +# + +obj-$(CONFIG_OPROFILE) += oprofile.o + +DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \ + oprof.o cpu_buffer.o buffer_sync.o \ + event_buffer.o oprofile_files.o \ + oprofilefs.o oprofile_stats.o \ + timer_int.o ) + +oprofile-y := $(DRIVER_OBJS) common.o +oprofile-$(CONFIG_HARDWARE_PM) += op_model_bf533.o diff --git a/arch/blackfin/oprofile/common.c b/arch/blackfin/oprofile/common.c new file mode 100644 index 000000000000..009a1700c854 --- /dev/null +++ b/arch/blackfin/oprofile/common.c @@ -0,0 +1,168 @@ +/* + * File: arch/blackfin/oprofile/common.c + * Based on: arch/alpha/oprofile/common.c + * Author: Anton Blanchard <anton@au.ibm.com> + * + * Created: + * Description: + * + * Modified: + * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/errno.h> +#include <linux/mutex.h> + +#include <asm/ptrace.h> +#include <asm/system.h> +#include <asm/blackfin.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include "op_blackfin.h" + +#define BFIN_533_ID 0xE5040003 +#define BFIN_537_ID 0xE5040002 + +static int pfmon_enabled; +static struct mutex pfmon_lock; + +struct op_bfin533_model *model; + +struct op_counter_config ctr[OP_MAX_COUNTER]; + +static int op_bfin_setup(void) +{ + int ret; + + /* Pre-compute the values to stuff in the hardware registers. */ + spin_lock(&oprofilefs_lock); + ret = model->reg_setup(ctr); + spin_unlock(&oprofilefs_lock); + + return ret; +} + +static void op_bfin_shutdown(void) +{ +#if 0 + /* what is the difference between shutdown and stop? */ +#endif +} + +static int op_bfin_start(void) +{ + int ret = -EBUSY; + + printk(KERN_INFO "KSDBG:in %s\n", __FUNCTION__); + mutex_lock(&pfmon_lock); + if (!pfmon_enabled) { + ret = model->start(ctr); + pfmon_enabled = !ret; + } + mutex_unlock(&pfmon_lock); + + return ret; +} + +static void op_bfin_stop(void) +{ + mutex_lock(&pfmon_lock); + if (pfmon_enabled) { + model->stop(); + pfmon_enabled = 0; + } + mutex_unlock(&pfmon_lock); +} + +static int op_bfin_create_files(struct super_block *sb, struct dentry *root) +{ + int i; + + for (i = 0; i < model->num_counters; ++i) { + struct dentry *dir; + char buf[3]; + printk(KERN_INFO "Oprofile: creating files... \n"); + + snprintf(buf, sizeof buf, "%d", i); + dir = oprofilefs_mkdir(sb, root, buf); + + oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled); + oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event); + oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count); + /* + * We dont support per counter user/kernel selection, but + * we leave the entries because userspace expects them + */ + oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel); + oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user); + oprofilefs_create_ulong(sb, dir, "unit_mask", + &ctr[i].unit_mask); + } + + return 0; +} +int __init oprofile_arch_init(struct oprofile_operations *ops) +{ +#ifdef CONFIG_HARDWARE_PM + unsigned int dspid; + + mutex_init(&pfmon_lock); + + dspid = bfin_read_DSPID(); + + printk(KERN_INFO "Oprofile got the cpu id is 0x%x. \n", dspid); + + switch (dspid) { + case BFIN_533_ID: + model = &op_model_bfin533; + model->num_counters = 2; + break; + case BFIN_537_ID: + model = &op_model_bfin533; + model->num_counters = 2; + break; + default: + return -ENODEV; + } + + ops->cpu_type = model->name; + ops->create_files = op_bfin_create_files; + ops->setup = op_bfin_setup; + ops->shutdown = op_bfin_shutdown; + ops->start = op_bfin_start; + ops->stop = op_bfin_stop; + + printk(KERN_INFO "oprofile: using %s performance monitoring.\n", + ops->cpu_type); + + return 0; +#else + return -1; +#endif +} + +void oprofile_arch_exit(void) +{ +} diff --git a/arch/blackfin/oprofile/op_blackfin.h b/arch/blackfin/oprofile/op_blackfin.h new file mode 100644 index 000000000000..f88f446c814f --- /dev/null +++ b/arch/blackfin/oprofile/op_blackfin.h @@ -0,0 +1,98 @@ +/* + * File: arch/blackfin/oprofile/op_blackfin.h + * Based on: + * Author: Anton Blanchard <anton@au.ibm.com> + * + * Created: + * Description: + * + * Modified: + * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef OP_BLACKFIN_H +#define OP_BLACKFIN_H 1 + +#define OP_MAX_COUNTER 2 + +#include <asm/blackfin.h> + +/* Per-counter configuration as set via oprofilefs. */ +struct op_counter_config { + unsigned long valid; + unsigned long enabled; + unsigned long event; + unsigned long count; + unsigned long kernel; + unsigned long user; + unsigned long unit_mask; +}; + +/* System-wide configuration as set via oprofilefs. */ +struct op_system_config { + unsigned long enable_kernel; + unsigned long enable_user; +}; + +/* Per-arch configuration */ +struct op_bfin533_model { + int (*reg_setup) (struct op_counter_config *); + int (*start) (struct op_counter_config *); + void (*stop) (void); + int num_counters; + char *name; +}; + +extern struct op_bfin533_model op_model_bfin533; + +static inline unsigned int ctr_read(void) +{ + unsigned int tmp; + + tmp = bfin_read_PFCTL(); + __builtin_bfin_csync(); + + return tmp; +} + +static inline void ctr_write(unsigned int val) +{ + bfin_write_PFCTL(val); + __builtin_bfin_csync(); +} + +static inline void count_read(unsigned int *count) +{ + count[0] = bfin_read_PFCNTR0(); + count[1] = bfin_read_PFCNTR1(); + __builtin_bfin_csync(); +} + +static inline void count_write(unsigned int *count) +{ + bfin_write_PFCNTR0(count[0]); + bfin_write_PFCNTR1(count[1]); + __builtin_bfin_csync(); +} + +extern int pm_overflow_handler(int irq, struct pt_regs *regs); + +#endif diff --git a/arch/blackfin/oprofile/op_model_bf533.c b/arch/blackfin/oprofile/op_model_bf533.c new file mode 100644 index 000000000000..b7a20a006b49 --- /dev/null +++ b/arch/blackfin/oprofile/op_model_bf533.c @@ -0,0 +1,161 @@ +/* + * File: arch/blackfin/oprofile/op_model_bf533.c + * Based on: + * Author: Anton Blanchard <anton@au.ibm.com> + * + * Created: + * Description: + * + * Modified: + * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <asm/ptrace.h> +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/blackfin.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include "op_blackfin.h" + +#define PM_ENABLE 0x01; +#define PM_CTL1_ENABLE 0x18 +#define PM_CTL0_ENABLE 0xC000 +#define COUNT_EDGE_ONLY 0x3000000 + +static int oprofile_running; + +static unsigned curr_pfctl, curr_count[2]; + +static int bfin533_reg_setup(struct op_counter_config *ctr) +{ + unsigned int pfctl = ctr_read(); + unsigned int count[2]; + + /* set Blackfin perf monitor regs with ctr */ + if (ctr[0].enabled) { + pfctl |= (PM_CTL0_ENABLE | ((char)ctr[0].event << 5)); + count[0] = 0xFFFFFFFF - ctr[0].count; + curr_count[0] = count[0]; + } + if (ctr[1].enabled) { + pfctl |= (PM_CTL1_ENABLE | ((char)ctr[1].event << 16)); + count[1] = 0xFFFFFFFF - ctr[1].count; + curr_count[1] = count[1]; + } + + pr_debug("ctr[0].enabled=%d,ctr[1].enabled=%d,ctr[0].event<<5=0x%x,ctr[1].event<<16=0x%x\n", ctr[0].enabled, ctr[1].enabled, ctr[0].event << 5, ctr[1].event << 16); + pfctl |= COUNT_EDGE_ONLY; + curr_pfctl = pfctl; + + pr_debug("write 0x%x to pfctl\n", pfctl); + ctr_write(pfctl); + count_write(count); + + return 0; +} + +static int bfin533_start(struct op_counter_config *ctr) +{ + unsigned int pfctl = ctr_read(); + + pfctl |= PM_ENABLE; + curr_pfctl = pfctl; + + ctr_write(pfctl); + + oprofile_running = 1; + pr_debug("start oprofile counter \n"); + + return 0; +} + +static void bfin533_stop(void) +{ + int pfctl; + + pfctl = ctr_read(); + pfctl &= ~PM_ENABLE; + /* freeze counters */ + ctr_write(pfctl); + + oprofile_running = 0; + pr_debug("stop oprofile counter \n"); +} + +static int get_kernel(void) +{ + int ipend, is_kernel; + + ipend = bfin_read_IPEND(); + + /* test bit 15 */ + is_kernel = ((ipend & 0x8000) != 0); + + return is_kernel; +} + +int pm_overflow_handler(int irq, struct pt_regs *regs) +{ + int is_kernel; + int i, cpu; + unsigned int pc, pfctl; + unsigned int count[2]; + + pr_debug("get interrupt in %s\n", __FUNCTION__); + if (oprofile_running == 0) { + pr_debug("error: entering interrupt when oprofile is stopped.\n\r"); + return -1; + } + + is_kernel = get_kernel(); + cpu = smp_processor_id(); + pc = regs->pc; + pfctl = ctr_read(); + + /* read the two event counter regs */ + count_read(count); + + /* if the counter overflows, add sample to oprofile buffer */ + for (i = 0; i < 2; ++i) { + if (oprofile_running) { + oprofile_add_sample(regs, i); + } + } + + /* reset the perfmon counter */ + ctr_write(curr_pfctl); + count_write(curr_count); + return 0; +} + +struct op_bfin533_model op_model_bfin533 = { + .reg_setup = bfin533_reg_setup, + .start = bfin533_start, + .stop = bfin533_stop, + .num_counters = 2, + .name = "blackfin/bf533" +}; diff --git a/arch/blackfin/oprofile/timer_int.c b/arch/blackfin/oprofile/timer_int.c new file mode 100644 index 000000000000..8fba16c846c9 --- /dev/null +++ b/arch/blackfin/oprofile/timer_int.c @@ -0,0 +1,74 @@ +/* + * File: arch/blackfin/oprofile/timer_int.c + * Based on: + * Author: Michael Kang + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/irq.h> +#include <linux/oprofile.h> + +#include <asm/ptrace.h> + +static void enable_sys_timer0() +{ +} +static void disable_sys_timer0() +{ +} + +static irqreturn_t sys_timer0_int_handler(int irq, void *dev_id, + struct pt_regs *regs) +{ + oprofile_add_sample(regs, 0); + return IRQ_HANDLED; +} + +static int sys_timer0_start(void) +{ + enable_sys_timer0(); + return request_irq(IVG11, sys_timer0_int_handler, 0, "sys_timer0", NULL); +} + +static void sys_timer0_stop(void) +{ + disable_sys_timer(); +} + +int __init sys_timer0_init(struct oprofile_operations *ops) +{ + extern int nmi_active; + + if (nmi_active <= 0) + return -ENODEV; + + ops->start = timer_start; + ops->stop = timer_stop; + ops->cpu_type = "timer"; + printk(KERN_INFO "oprofile: using NMI timer interrupt.\n"); + return 0; +} |