diff options
Diffstat (limited to 'arch/cris/arch-v10/drivers/gpio.c')
| -rw-r--r-- | arch/cris/arch-v10/drivers/gpio.c | 944 |
1 files changed, 944 insertions, 0 deletions
diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c new file mode 100644 index 000000000000..c095de82a0da --- /dev/null +++ b/arch/cris/arch-v10/drivers/gpio.c @@ -0,0 +1,944 @@ +/* $Id: gpio.c,v 1.12 2004/08/24 07:19:59 starvik Exp $ + * + * Etrax general port I/O device + * + * Copyright (c) 1999, 2000, 2001, 2002 Axis Communications AB + * + * Authors: Bjorn Wesen (initial version) + * Ola Knutsson (LED handling) + * Johan Adolfsson (read/set directions, write, port G) + * + * $Log: gpio.c,v $ + * Revision 1.12 2004/08/24 07:19:59 starvik + * Whitespace cleanup + * + * Revision 1.11 2004/05/14 07:58:03 starvik + * Merge of changes from 2.4 + * + * Revision 1.9 2003/09/11 07:29:48 starvik + * Merge of Linux 2.6.0-test5 + * + * Revision 1.8 2003/07/04 08:27:37 starvik + * Merge of Linux 2.5.74 + * + * Revision 1.7 2003/01/10 07:44:07 starvik + * init_ioremap is now called by kernel before drivers are initialized + * + * Revision 1.6 2002/12/11 13:13:57 starvik + * Added arch/ to v10 specific includes + * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer) + * + * Revision 1.5 2002/11/20 11:56:11 starvik + * Merge of Linux 2.5.48 + * + * Revision 1.4 2002/11/18 10:10:05 starvik + * Linux 2.5 port of latest gpio.c from Linux 2.4 + * + * Revision 1.20 2002/10/16 21:16:24 johana + * Added support for PA high level interrupt. + * That gives 2ms response time with iodtest for high levels and 2-12 ms + * response time on low levels if the check is not made in + * process.c:cpu_idle() as well. + * + * Revision 1.19 2002/10/14 18:27:33 johana + * Implemented alarm handling so select() now works. + * Latency is around 6-9 ms with a etrax_gpio_wake_up_check() in + * cpu_idle(). + * Otherwise I get 15-18 ms (same as doing the poll in userspace - + * but less overhead). + * TODO? Perhaps we should add the check in IMMEDIATE_BH (or whatever it + * is in 2.4) as well? + * TODO? Perhaps call request_irq()/free_irq() only when needed? + * Increased version to 2.5 + * + * Revision 1.18 2002/10/11 15:02:00 johana + * Mask inverted 8 bit value in setget_input(). + * + * Revision 1.17 2002/06/17 15:53:01 johana + * Added IO_READ_INBITS, IO_READ_OUTBITS, IO_SETGET_INPUT and IO_SETGET_OUTPUT + * that take a pointer as argument and thus can handle 32 bit ports (G) + * correctly. + * These should be used instead of IO_READBITS, IO_SETINPUT and IO_SETOUTPUT. + * (especially if Port G bit 31 is used) + * + * Revision 1.16 2002/06/17 09:59:51 johana + * Returning 32 bit values in the ioctl return value doesn't work if bit + * 31 is set (could happen for port G), so mask it of with 0x7FFFFFFF. + * A new set of ioctl's will be added. + * + * Revision 1.15 2002/05/06 13:19:13 johana + * IO_SETINPUT returns mask with bit set = inputs for PA and PB as well. + * + * Revision 1.14 2002/04/12 12:01:53 johana + * Use global r_port_g_data_shadow. + * Moved gpio_init_port_g() closer to gpio_init() and marked it __init. + * + * Revision 1.13 2002/04/10 12:03:55 johana + * Added support for port G /dev/gpiog (minor 3). + * Changed indentation on switch cases. + * Fixed other spaces to tabs. + * + * Revision 1.12 2001/11/12 19:42:15 pkj + * * Corrected return values from gpio_leds_ioctl(). + * * Fixed compiler warnings. + * + * Revision 1.11 2001/10/30 14:39:12 johana + * Added D() around gpio_write printk. + * + * Revision 1.10 2001/10/25 10:24:42 johana + * Added IO_CFG_WRITE_MODE ioctl and write method that can do fast + * bittoggling in the kernel. (This speeds up programming an FPGA with 450kB + * from ~60 seconds to 4 seconds). + * Added save_flags/cli/restore_flags in ioctl. + * + * Revision 1.9 2001/05/04 14:16:07 matsfg + * Corrected spelling error + * + * Revision 1.8 2001/04/27 13:55:26 matsfg + * Moved initioremap. + * Turns off all LEDS on init. + * Added support for shutdown and powerbutton. + * + * Revision 1.7 2001/04/04 13:30:08 matsfg + * Added bitset and bitclear for leds. Calls init_ioremap to set up memmapping + * + * Revision 1.6 2001/03/26 16:03:06 bjornw + * Needs linux/config.h + * + * Revision 1.5 2001/03/26 14:22:03 bjornw + * Namechange of some config options + * + * Revision 1.4 2001/02/27 13:52:48 bjornw + * malloc.h -> slab.h + * + * Revision 1.3 2001/01/24 15:06:48 bjornw + * gpio_wq correct type + * + * Revision 1.2 2001/01/18 16:07:30 bjornw + * 2.4 port + * + * Revision 1.1 2001/01/18 15:55:16 bjornw + * Verbatim copy of etraxgpio.c from elinux 2.0 added + * + * + */ + +#include <linux/config.h> + +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/poll.h> +#include <linux/init.h> +#include <linux/interrupt.h> + +#include <asm/etraxgpio.h> +#include <asm/arch/svinto.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/irq.h> + +#define GPIO_MAJOR 120 /* experimental MAJOR number */ + +#define D(x) + +#if 0 +static int dp_cnt; +#define DP(x) do { dp_cnt++; if (dp_cnt % 1000 == 0) x; }while(0) +#else +#define DP(x) +#endif + +static char gpio_name[] = "etrax gpio"; + +#if 0 +static wait_queue_head_t *gpio_wq; +#endif + +static int gpio_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg); +static ssize_t gpio_write(struct file * file, const char * buf, size_t count, + loff_t *off); +static int gpio_open(struct inode *inode, struct file *filp); +static int gpio_release(struct inode *inode, struct file *filp); +static unsigned int gpio_poll(struct file *filp, struct poll_table_struct *wait); + +/* private data per open() of this driver */ + +struct gpio_private { + struct gpio_private *next; + /* These fields are for PA and PB only */ + volatile unsigned char *port, *shadow; + volatile unsigned char *dir, *dir_shadow; + unsigned char changeable_dir; + unsigned char changeable_bits; + unsigned char clk_mask; + unsigned char data_mask; + unsigned char write_msb; + unsigned char pad1, pad2, pad3; + /* These fields are generic */ + unsigned long highalarm, lowalarm; + wait_queue_head_t alarm_wq; + int minor; +}; + +/* linked list of alarms to check for */ + +static struct gpio_private *alarmlist = 0; + +static int gpio_some_alarms = 0; /* Set if someone uses alarm */ +static unsigned long gpio_pa_irq_enabled_mask = 0; + +/* Port A and B use 8 bit access, but Port G is 32 bit */ +#define NUM_PORTS (GPIO_MINOR_B+1) + +static volatile unsigned char *ports[NUM_PORTS] = { + R_PORT_PA_DATA, + R_PORT_PB_DATA, +}; +static volatile unsigned char *shads[NUM_PORTS] = { + &port_pa_data_shadow, + &port_pb_data_shadow +}; + +/* What direction bits that are user changeable 1=changeable*/ +#ifndef CONFIG_ETRAX_PA_CHANGEABLE_DIR +#define CONFIG_ETRAX_PA_CHANGEABLE_DIR 0x00 +#endif +#ifndef CONFIG_ETRAX_PB_CHANGEABLE_DIR +#define CONFIG_ETRAX_PB_CHANGEABLE_DIR 0x00 +#endif + +#ifndef CONFIG_ETRAX_PA_CHANGEABLE_BITS +#define CONFIG_ETRAX_PA_CHANGEABLE_BITS 0xFF +#endif +#ifndef CONFIG_ETRAX_PB_CHANGEABLE_BITS +#define CONFIG_ETRAX_PB_CHANGEABLE_BITS 0xFF +#endif + + +static unsigned char changeable_dir[NUM_PORTS] = { + CONFIG_ETRAX_PA_CHANGEABLE_DIR, + CONFIG_ETRAX_PB_CHANGEABLE_DIR +}; +static unsigned char changeable_bits[NUM_PORTS] = { + CONFIG_ETRAX_PA_CHANGEABLE_BITS, + CONFIG_ETRAX_PB_CHANGEABLE_BITS +}; + +static volatile unsigned char *dir[NUM_PORTS] = { + R_PORT_PA_DIR, + R_PORT_PB_DIR +}; + +static volatile unsigned char *dir_shadow[NUM_PORTS] = { + &port_pa_dir_shadow, + &port_pb_dir_shadow +}; + +/* Port G is 32 bit, handle it special, some bits are both inputs + and outputs at the same time, only some of the bits can change direction + and some of them in groups of 8 bit. */ +static unsigned long changeable_dir_g; +static unsigned long dir_g_in_bits; +static unsigned long dir_g_out_bits; +static unsigned long dir_g_shadow; /* 1=output */ + +#define USE_PORTS(priv) ((priv)->minor <= GPIO_MINOR_B) + + + +static unsigned int +gpio_poll(struct file *file, + poll_table *wait) +{ + unsigned int mask = 0; + struct gpio_private *priv = (struct gpio_private *)file->private_data; + unsigned long data; + poll_wait(file, &priv->alarm_wq, wait); + if (priv->minor == GPIO_MINOR_A) { + unsigned long flags; + unsigned long tmp; + data = *R_PORT_PA_DATA; + /* PA has support for high level interrupt - + * lets activate for those low and with highalarm set + */ + tmp = ~data & priv->highalarm & 0xFF; + tmp = (tmp << R_IRQ_MASK1_SET__pa0__BITNR); + save_flags(flags); cli(); + gpio_pa_irq_enabled_mask |= tmp; + *R_IRQ_MASK1_SET = tmp; + restore_flags(flags); + + } else if (priv->minor == GPIO_MINOR_B) + data = *R_PORT_PB_DATA; + else if (priv->minor == GPIO_MINOR_G) + data = *R_PORT_G_DATA; + else + return 0; + + if ((data & priv->highalarm) || + (~data & priv->lowalarm)) { + mask = POLLIN|POLLRDNORM; + } + + DP(printk("gpio_poll ready: mask 0x%08X\n", mask)); + return mask; +} + +int etrax_gpio_wake_up_check(void) +{ + struct gpio_private *priv = alarmlist; + unsigned long data = 0; + int ret = 0; + while (priv) { + if (USE_PORTS(priv)) { + data = *priv->port; + } else if (priv->minor == GPIO_MINOR_G) { + data = *R_PORT_G_DATA; + } + if ((data & priv->highalarm) || + (~data & priv->lowalarm)) { + DP(printk("etrax_gpio_wake_up_check %i\n",priv->minor)); + wake_up_interruptible(&priv->alarm_wq); + ret = 1; + } + priv = priv->next; + } + return ret; +} + +static irqreturn_t +gpio_poll_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + if (gpio_some_alarms) { + etrax_gpio_wake_up_check(); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static irqreturn_t +gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned long tmp; + /* Find what PA interrupts are active */ + tmp = (*R_IRQ_READ1); + + /* Find those that we have enabled */ + tmp &= gpio_pa_irq_enabled_mask; + + /* Clear them.. */ + *R_IRQ_MASK1_CLR = tmp; + gpio_pa_irq_enabled_mask &= ~tmp; + + if (gpio_some_alarms) { + return IRQ_RETVAL(etrax_gpio_wake_up_check()); + } + return IRQ_NONE; +} + + +static ssize_t gpio_write(struct file * file, const char * buf, size_t count, + loff_t *off) +{ + struct gpio_private *priv = (struct gpio_private *)file->private_data; + unsigned char data, clk_mask, data_mask, write_msb; + unsigned long flags; + ssize_t retval = count; + if (priv->minor !=GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) { + return -EFAULT; + } + + if (!access_ok(VERIFY_READ, buf, count)) { + return -EFAULT; + } + clk_mask = priv->clk_mask; + data_mask = priv->data_mask; + /* It must have been configured using the IO_CFG_WRITE_MODE */ + /* Perhaps a better error code? */ + if (clk_mask == 0 || data_mask == 0) { + return -EPERM; + } + write_msb = priv->write_msb; + D(printk("gpio_write: %lu to data 0x%02X clk 0x%02X msb: %i\n",count, data_mask, clk_mask, write_msb)); + while (count--) { + int i; + data = *buf++; + if (priv->write_msb) { + for (i = 7; i >= 0;i--) { + local_irq_save(flags); local_irq_disable(); + *priv->port = *priv->shadow &= ~clk_mask; + if (data & 1<<i) + *priv->port = *priv->shadow |= data_mask; + else + *priv->port = *priv->shadow &= ~data_mask; + /* For FPGA: min 5.0ns (DCC) before CCLK high */ + *priv->port = *priv->shadow |= clk_mask; + local_irq_restore(flags); + } + } else { + for (i = 0; i <= 7;i++) { + local_irq_save(flags); local_irq_disable(); + *priv->port = *priv->shadow &= ~clk_mask; + if (data & 1<<i) + *priv->port = *priv->shadow |= data_mask; + else + *priv->port = *priv->shadow &= ~data_mask; + /* For FPGA: min 5.0ns (DCC) before CCLK high */ + *priv->port = *priv->shadow |= clk_mask; + local_irq_restore(flags); + } + } + } + return retval; +} + + + +static int +gpio_open(struct inode *inode, struct file *filp) +{ + struct gpio_private *priv; + int p = MINOR(inode->i_rdev); + + if (p > GPIO_MINOR_LAST) + return -EINVAL; + + priv = (struct gpio_private *)kmalloc(sizeof(struct gpio_private), + GFP_KERNEL); + + if (!priv) + return -ENOMEM; + + priv->minor = p; + + /* initialize the io/alarm struct and link it into our alarmlist */ + + priv->next = alarmlist; + alarmlist = priv; + if (USE_PORTS(priv)) { /* A and B */ + priv->port = ports[p]; + priv->shadow = shads[p]; + priv->dir = dir[p]; + priv->dir_shadow = dir_shadow[p]; + priv->changeable_dir = changeable_dir[p]; + priv->changeable_bits = changeable_bits[p]; + } else { + priv->port = NULL; + priv->shadow = NULL; + priv->dir = NULL; + priv->dir_shadow = NULL; + priv->changeable_dir = 0; + priv->changeable_bits = 0; + } + + priv->highalarm = 0; + priv->lowalarm = 0; + priv->clk_mask = 0; + priv->data_mask = 0; + init_waitqueue_head(&priv->alarm_wq); + + filp->private_data = (void *)priv; + + return 0; +} + +static int +gpio_release(struct inode *inode, struct file *filp) +{ + struct gpio_private *p = alarmlist; + struct gpio_private *todel = (struct gpio_private *)filp->private_data; + + /* unlink from alarmlist and free the private structure */ + + if (p == todel) { + alarmlist = todel->next; + } else { + while (p->next != todel) + p = p->next; + p->next = todel->next; + } + + kfree(todel); + /* Check if there are still any alarms set */ + p = alarmlist; + while (p) { + if (p->highalarm | p->lowalarm) { + gpio_some_alarms = 1; + return 0; + } + p = p->next; + } + gpio_some_alarms = 0; + + return 0; +} + +/* Main device API. ioctl's to read/set/clear bits, as well as to + * set alarms to wait for using a subsequent select(). + */ + +unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg) +{ + /* Set direction 0=unchanged 1=input, + * return mask with 1=input + */ + unsigned long flags; + if (USE_PORTS(priv)) { + local_irq_save(flags); local_irq_disable(); + *priv->dir = *priv->dir_shadow &= + ~((unsigned char)arg & priv->changeable_dir); + local_irq_restore(flags); + return ~(*priv->dir_shadow) & 0xFF; /* Only 8 bits */ + } else if (priv->minor == GPIO_MINOR_G) { + /* We must fiddle with R_GEN_CONFIG to change dir */ + save_flags(flags); cli(); + if (((arg & dir_g_in_bits) != arg) && + (arg & changeable_dir_g)) { + arg &= changeable_dir_g; + /* Clear bits in genconfig to set to input */ + if (arg & (1<<0)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g0dir); + dir_g_in_bits |= (1<<0); + dir_g_out_bits &= ~(1<<0); + } + if ((arg & 0x0000FF00) == 0x0000FF00) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g8_15dir); + dir_g_in_bits |= 0x0000FF00; + dir_g_out_bits &= ~0x0000FF00; + } + if ((arg & 0x00FF0000) == 0x00FF0000) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g16_23dir); + dir_g_in_bits |= 0x00FF0000; + dir_g_out_bits &= ~0x00FF0000; + } + if (arg & (1<<24)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG,g24dir); + dir_g_in_bits |= (1<<24); + dir_g_out_bits &= ~(1<<24); + } + D(printk(KERN_INFO "gpio: SETINPUT on port G set " + "genconfig to 0x%08lX " + "in_bits: 0x%08lX " + "out_bits: 0x%08lX\n", + (unsigned long)genconfig_shadow, + dir_g_in_bits, dir_g_out_bits)); + *R_GEN_CONFIG = genconfig_shadow; + /* Must be a >120 ns delay before writing this again */ + + } + restore_flags(flags); + return dir_g_in_bits; + } + return 0; +} /* setget_input */ + +unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg) +{ + unsigned long flags; + if (USE_PORTS(priv)) { + local_irq_save(flags); local_irq_disable(); + *priv->dir = *priv->dir_shadow |= + ((unsigned char)arg & priv->changeable_dir); + local_irq_restore(flags); + return *priv->dir_shadow; + } else if (priv->minor == GPIO_MINOR_G) { + /* We must fiddle with R_GEN_CONFIG to change dir */ + save_flags(flags); cli(); + if (((arg & dir_g_out_bits) != arg) && + (arg & changeable_dir_g)) { + /* Set bits in genconfig to set to output */ + if (arg & (1<<0)) { + genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g0dir); + dir_g_out_bits |= (1<<0); + dir_g_in_bits &= ~(1<<0); + } + if ((arg & 0x0000FF00) == 0x0000FF00) { + genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g8_15dir); + dir_g_out_bits |= 0x0000FF00; + dir_g_in_bits &= ~0x0000FF00; + } + if ((arg & 0x00FF0000) == 0x00FF0000) { + genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g16_23dir); + dir_g_out_bits |= 0x00FF0000; + dir_g_in_bits &= ~0x00FF0000; + } + if (arg & (1<<24)) { + genconfig_shadow |= IO_MASK(R_GEN_CONFIG,g24dir); + dir_g_out_bits |= (1<<24); + dir_g_in_bits &= ~(1<<24); + } + D(printk(KERN_INFO "gpio: SETOUTPUT on port G set " + "genconfig to 0x%08lX " + "in_bits: 0x%08lX " + "out_bits: 0x%08lX\n", + (unsigned long)genconfig_shadow, + dir_g_in_bits, dir_g_out_bits)); + *R_GEN_CONFIG = genconfig_shadow; + /* Must be a >120 ns delay before writing this again */ + } + restore_flags(flags); + return dir_g_out_bits & 0x7FFFFFFF; + } + return 0; +} /* setget_output */ + +static int +gpio_leds_ioctl(unsigned int cmd, unsigned long arg); + +static int +gpio_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + unsigned long flags; + unsigned long val; + struct gpio_private *priv = (struct gpio_private *)file->private_data; + if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) { + return -EINVAL; + } + + switch (_IOC_NR(cmd)) { + case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ + // read the port + if (USE_PORTS(priv)) { + return *priv->port; + } else if (priv->minor == GPIO_MINOR_G) { + return (*R_PORT_G_DATA) & 0x7FFFFFFF; + } + break; + case IO_SETBITS: + local_irq_save(flags); local_irq_disable(); + // set changeable bits with a 1 in arg + if (USE_PORTS(priv)) { + *priv->port = *priv->shadow |= + ((unsigned char)arg & priv->changeable_bits); + } else if (priv->minor == GPIO_MINOR_G) { + *R_PORT_G_DATA = port_g_data_shadow |= (arg & dir_g_out_bits); + } + local_irq_restore(flags); + break; + case IO_CLRBITS: + local_irq_save(flags); local_irq_disable(); + // clear changeable bits with a 1 in arg + if (USE_PORTS(priv)) { + *priv->port = *priv->shadow &= + ~((unsigned char)arg & priv->changeable_bits); + } else if (priv->minor == GPIO_MINOR_G) { + *R_PORT_G_DATA = port_g_data_shadow &= ~((unsigned long)arg & dir_g_out_bits); + } + local_irq_restore(flags); + break; + case IO_HIGHALARM: + // set alarm when bits with 1 in arg go high + priv->highalarm |= arg; + gpio_some_alarms = 1; + break; + case IO_LOWALARM: + // set alarm when bits with 1 in arg go low + priv->lowalarm |= arg; + gpio_some_alarms = 1; + break; + case IO_CLRALARM: + // clear alarm for bits with 1 in arg + priv->highalarm &= ~arg; + priv->lowalarm &= ~arg; + { + /* Must update gpio_some_alarms */ + struct gpio_private *p = alarmlist; + int some_alarms; + some_alarms = 0; + while (p) { + if (p->highalarm | p->lowalarm) { + some_alarms = 1; + break; + } + p = p->next; + } + gpio_some_alarms = some_alarms; + } + break; + case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ + /* Read direction 0=input 1=output */ + if (USE_PORTS(priv)) { + return *priv->dir_shadow; + } else if (priv->minor == GPIO_MINOR_G) { + /* Note: Some bits are both in and out, + * Those that are dual is set here as well. + */ + return (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF; + } + case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */ + /* Set direction 0=unchanged 1=input, + * return mask with 1=input + */ + return setget_input(priv, arg) & 0x7FFFFFFF; + break; + case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */ + /* Set direction 0=unchanged 1=output, + * return mask with 1=output + */ + return setget_output(priv, arg) & 0x7FFFFFFF; + + case IO_SHUTDOWN: + SOFT_SHUTDOWN(); + break; + case IO_GET_PWR_BT: +#if defined (CONFIG_ETRAX_SOFT_SHUTDOWN) + return (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT)); +#else + return 0; +#endif + break; + case IO_CFG_WRITE_MODE: + priv->clk_mask = arg & 0xFF; + priv->data_mask = (arg >> 8) & 0xFF; + priv->write_msb = (arg >> 16) & 0x01; + /* Check if we're allowed to change the bits and + * the direction is correct + */ + if (!((priv->clk_mask & priv->changeable_bits) && + (priv->data_mask & priv->changeable_bits) && + (priv->clk_mask & *priv->dir_shadow) && + (priv->data_mask & *priv->dir_shadow))) + { + priv->clk_mask = 0; + priv->data_mask = 0; + return -EPERM; + } + break; + case IO_READ_INBITS: + /* *arg is result of reading the input pins */ + if (USE_PORTS(priv)) { + val = *priv->port; + } else if (priv->minor == GPIO_MINOR_G) { + val = *R_PORT_G_DATA; + } + if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + return -EFAULT; + return 0; + break; + case IO_READ_OUTBITS: + /* *arg is result of reading the output shadow */ + if (USE_PORTS(priv)) { + val = *priv->shadow; + } else if (priv->minor == GPIO_MINOR_G) { + val = port_g_data_shadow; + } + if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + return -EFAULT; + break; + case IO_SETGET_INPUT: + /* bits set in *arg is set to input, + * *arg updated with current input pins. + */ + if (copy_from_user(&val, (unsigned long*)arg, sizeof(val))) + return -EFAULT; + val = setget_input(priv, val); + if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + return -EFAULT; + break; + case IO_SETGET_OUTPUT: + /* bits set in *arg is set to output, + * *arg updated with current output pins. + */ + if (copy_from_user(&val, (unsigned long*)arg, sizeof(val))) + return -EFAULT; + val = setget_output(priv, val); + if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + return -EFAULT; + break; + default: + if (priv->minor == GPIO_MINOR_LEDS) + return gpio_leds_ioctl(cmd, arg); + else + return -EINVAL; + } /* switch */ + + return 0; +} + +static int +gpio_leds_ioctl(unsigned int cmd, unsigned long arg) +{ + unsigned char green; + unsigned char red; + + switch (_IOC_NR(cmd)) { + case IO_LEDACTIVE_SET: + green = ((unsigned char) arg) & 1; + red = (((unsigned char) arg) >> 1) & 1; + LED_ACTIVE_SET_G(green); + LED_ACTIVE_SET_R(red); + break; + + case IO_LED_SETBIT: + LED_BIT_SET(arg); + break; + + case IO_LED_CLRBIT: + LED_BIT_CLR(arg); + break; + + default: + return -EINVAL; + } /* switch */ + + return 0; +} + +struct file_operations gpio_fops = { + .owner = THIS_MODULE, + .poll = gpio_poll, + .ioctl = gpio_ioctl, + .write = gpio_write, + .open = gpio_open, + .release = gpio_release, +}; + + +static void __init gpio_init_port_g(void) +{ +#define GROUPA (0x0000FF3F) +#define GROUPB (1<<6 | 1<<7) +#define GROUPC (1<<30 | 1<<31) +#define GROUPD (0x3FFF0000) +#define GROUPD_LOW (0x00FF0000) + unsigned long used_in_bits = 0; + unsigned long used_out_bits = 0; + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi0, select)){ + used_in_bits |= GROUPA | GROUPB | 0 | 0; + used_out_bits |= GROUPA | GROUPB | 0 | 0; + } + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ata, select)) { + used_in_bits |= GROUPA | GROUPB | GROUPC | (GROUPD & ~(1<<25|1<<26)); + used_out_bits |= GROUPA | GROUPB | GROUPC | GROUPD; + } + + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, par0, select)) { + used_in_bits |= (GROUPA & ~(1<<0)) | 0 | 0 | 0; + used_out_bits |= (GROUPA & ~(1<<0)) | 0 | 0 | 0; + } + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ser2, select)) { + used_in_bits |= 0 | GROUPB | 0 | 0; + used_out_bits |= 0 | GROUPB | 0 | 0; + } + /* mio same as shared RAM ? */ + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, mio, select)) { + used_in_bits |= (GROUPA & ~(1<<0)) | 0 |0 |GROUPD_LOW; + used_out_bits |= (GROUPA & ~(1<<0|1<<1|1<<2)) | 0 |0 |GROUPD_LOW; + } + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi1, select)) { + used_in_bits |= 0 | 0 | GROUPC | GROUPD; + used_out_bits |= 0 | 0 | GROUPC | GROUPD; + } + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi0w, select)) { + used_in_bits |= GROUPA | GROUPB | 0 | (GROUPD_LOW | 1<<24); + used_out_bits |= GROUPA | GROUPB | 0 | (GROUPD_LOW | 1<<24 | 1<<25|1<<26); + } + + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, par1, select)) { + used_in_bits |= 0 | 0 | 0 | (GROUPD & ~(1<<24)); + used_out_bits |= 0 | 0 | 0 | (GROUPD & ~(1<<24)); + } + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ser3, select)) { + used_in_bits |= 0 | 0 | GROUPC | 0; + used_out_bits |= 0 | 0 | GROUPC | 0; + } + /* mio same as shared RAM-W? */ + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, mio_w, select)) { + used_in_bits |= (GROUPA & ~(1<<0)) | 0 | 0 |GROUPD_LOW; + used_out_bits |= (GROUPA & ~(1<<0|1<<1|1<<2)) | 0 | 0 |GROUPD_LOW; + } + /* TODO: USB p2, parw, sync ser3? */ + + /* Initialise the dir_g_shadow etc. depending on genconfig */ + /* 0=input 1=output */ + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g0dir, out)) + dir_g_shadow |= (1 << 0); + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g8_15dir, out)) + dir_g_shadow |= 0x0000FF00; + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g16_23dir, out)) + dir_g_shadow |= 0x00FF0000; + if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g24dir, out)) + dir_g_shadow |= (1 << 24); + + dir_g_in_bits = ~used_in_bits; + dir_g_out_bits = ~used_out_bits; + + changeable_dir_g = 0x01FFFF01; /* all that can change dir */ + changeable_dir_g &= dir_g_out_bits; + changeable_dir_g &= dir_g_in_bits; + /* Correct the bits that can change direction */ + dir_g_out_bits &= ~changeable_dir_g; + dir_g_out_bits |= dir_g_shadow; + dir_g_in_bits &= ~changeable_dir_g; + dir_g_in_bits |= (~dir_g_shadow & changeable_dir_g); + + + printk(KERN_INFO "GPIO port G: in_bits: 0x%08lX out_bits: 0x%08lX val: %08lX\n", + dir_g_in_bits, dir_g_out_bits, (unsigned long)*R_PORT_G_DATA); + printk(KERN_INFO "GPIO port G: dir: %08lX changeable: %08lX\n", + dir_g_shadow, changeable_dir_g); +} + +/* main driver initialization routine, called from mem.c */ + +static __init int +gpio_init(void) +{ + int res; +#if defined (CONFIG_ETRAX_CSP0_LEDS) + int i; +#endif + + /* do the formalities */ + + res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops); + if (res < 0) { + printk(KERN_ERR "gpio: couldn't get a major number.\n"); + return res; + } + + /* Clear all leds */ +#if defined (CONFIG_ETRAX_CSP0_LEDS) || defined (CONFIG_ETRAX_PA_LEDS) || defined (CONFIG_ETRAX_PB_LEDS) + LED_NETWORK_SET(0); + LED_ACTIVE_SET(0); + LED_DISK_READ(0); + LED_DISK_WRITE(0); + +#if defined (CONFIG_ETRAX_CSP0_LEDS) + for (i = 0; i < 32; i++) { + LED_BIT_SET(i); + } +#endif + +#endif + gpio_init_port_g(); + printk(KERN_INFO "ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002 Axis Communications AB\n"); + /* We call etrax_gpio_wake_up_check() from timer interrupt and + * from cpu_idle() in kernel/process.c + * The check in cpu_idle() reduces latency from ~15 ms to ~6 ms + * in some tests. + */ + if (request_irq(TIMER0_IRQ_NBR, gpio_poll_timer_interrupt, + SA_SHIRQ | SA_INTERRUPT,"gpio poll", NULL)) { + printk(KERN_CRIT "err: timer0 irq for gpio\n"); + } + if (request_irq(PA_IRQ_NBR, gpio_pa_interrupt, + SA_SHIRQ | SA_INTERRUPT,"gpio PA", NULL)) { + printk(KERN_CRIT "err: PA irq for gpio\n"); + } + + + return res; +} + +/* this makes sure that gpio_init is called during kernel boot */ + +module_init(gpio_init); |