1 files changed, 16 insertions, 61 deletions

diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index 9204be6eedb3..7c724ffa08bb 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -803,7 +803,6 @@ no_apic:
 
 void __init init_apic_mappings(void)
 {
-	unsigned int orig_apicid;
 	unsigned long apic_phys;
 
 	/*
@@ -825,11 +824,8 @@ void __init init_apic_mappings(void)
 	 * Fetch the APIC ID of the BSP in case we have a
 	 * default configuration (or the MP table is broken).
 	 */
-	orig_apicid = boot_cpu_physical_apicid;
-	boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
-	if ((orig_apicid != -1U) && (orig_apicid != boot_cpu_physical_apicid))
-		printk(KERN_WARNING "Boot APIC ID in local APIC unexpected (%d vs %d)",
-			orig_apicid, boot_cpu_physical_apicid);
+	if (boot_cpu_physical_apicid == -1U)
+		boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
 
 #ifdef CONFIG_X86_IO_APIC
 	{
@@ -1259,81 +1255,40 @@ fastcall void smp_error_interrupt(struct pt_regs *regs)
 }
 
 /*
- * This initializes the IO-APIC and APIC hardware.
+ * This initializes the IO-APIC and APIC hardware if this is
+ * a UP kernel.
  */
-int __init APIC_init(void)
+int __init APIC_init_uniprocessor (void)
 {
-	if (enable_local_apic < 0) {
-		printk(KERN_INFO "APIC disabled\n");
-		return -1;
-	}
+	if (enable_local_apic < 0)
+		clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
 
-	/* See if we have a SMP configuration or have forced enabled
-	 * the local apic.
-	 */
-	if (!smp_found_config && !acpi_lapic && !cpu_has_apic) {
-		enable_local_apic = -1;
+	if (!smp_found_config && !cpu_has_apic)
 		return -1;
-	}
 
 	/*
-	 * Complain if the BIOS pretends there is an apic.
-	 * Then get out because we don't have an a local apic.
+	 * Complain if the BIOS pretends there is one.
 	 */
 	if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
 		printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
 			boot_cpu_physical_apicid);
-		printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
-		enable_local_apic = -1;
 		return -1;
 	}
 
 	verify_local_APIC();
 
-	/*
-	 * Should not be necessary because the MP table should list the boot
-	 * CPU too, but we do it for the sake of robustness anyway.
-	 * Makes no sense to do this check in clustered apic mode, so skip it
-	 */
-	if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
-		printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
-				boot_cpu_physical_apicid);
-		physid_set(boot_cpu_physical_apicid, phys_cpu_present_map);
-	}
-
-	/*
-	 * Switch from PIC to APIC mode.
-	 */
 	connect_bsp_APIC();
-	setup_local_APIC();
 
-#ifdef CONFIG_X86_IO_APIC
-	/*
-	 * Now start the IO-APICs
-	 */
-	if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
-		setup_IO_APIC();
-#endif
-	return 0;
-}
+	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
 
-void __init APIC_late_time_init(void)
-{
-	/* Improve our loops per jiffy estimate */
-	loops_per_jiffy = ((1000 + HZ - 1)/HZ)*cpu_khz;
-	boot_cpu_data.loops_per_jiffy = loops_per_jiffy;
-	cpu_data[0].loops_per_jiffy = loops_per_jiffy;
-
-	/* setup_apic_nmi_watchdog doesn't work properly before cpu_khz is
-	 * initialized.  So redo it here to ensure the boot cpu is setup
-	 * properly.
-	 */
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		setup_apic_nmi_watchdog();
+	setup_local_APIC();
 
 #ifdef CONFIG_X86_IO_APIC
-	if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
-		IO_APIC_late_time_init();
+	if (smp_found_config)
+		if (!skip_ioapic_setup && nr_ioapics)
+			setup_IO_APIC();
 #endif
 	setup_boot_APIC_clock();
+
+	return 0;
 }