diff options
Diffstat (limited to 'arch/i386/kernel')
23 files changed, 1 insertions, 9443 deletions
diff --git a/arch/i386/kernel/cpu/Makefile b/arch/i386/kernel/cpu/Makefile index 09effc02e35a..8d9ce0232ada 100644 --- a/arch/i386/kernel/cpu/Makefile +++ b/arch/i386/kernel/cpu/Makefile @@ -15,6 +15,6 @@ obj-y += umc.o obj-$(CONFIG_X86_MCE) += ../../../x86/kernel/cpu/mcheck/ obj-$(CONFIG_MTRR) += mtrr/ -obj-$(CONFIG_CPU_FREQ) += cpufreq/ +obj-$(CONFIG_CPU_FREQ) += ../../../x86/kernel/cpu/cpufreq/ obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig deleted file mode 100644 index d8c6f132dc7a..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/Kconfig +++ /dev/null @@ -1,250 +0,0 @@ -# -# CPU Frequency scaling -# - -menu "CPU Frequency scaling" - -source "drivers/cpufreq/Kconfig" - -if CPU_FREQ - -comment "CPUFreq processor drivers" - -config X86_ACPI_CPUFREQ - tristate "ACPI Processor P-States driver" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This driver adds a CPUFreq driver which utilizes the ACPI - Processor Performance States. - This driver also supports Intel Enhanced Speedstep. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config ELAN_CPUFREQ - tristate "AMD Elan SC400 and SC410" - select CPU_FREQ_TABLE - depends on X86_ELAN - ---help--- - This adds the CPUFreq driver for AMD Elan SC400 and SC410 - processors. - - You need to specify the processor maximum speed as boot - parameter: elanfreq=maxspeed (in kHz) or as module - parameter "max_freq". - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config SC520_CPUFREQ - tristate "AMD Elan SC520" - select CPU_FREQ_TABLE - depends on X86_ELAN - ---help--- - This adds the CPUFreq driver for AMD Elan SC520 processor. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - - -config X86_POWERNOW_K6 - tristate "AMD Mobile K6-2/K6-3 PowerNow!" - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for mobile AMD K6-2+ and mobile - AMD K6-3+ processors. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_POWERNOW_K7 - tristate "AMD Mobile Athlon/Duron PowerNow!" - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for mobile AMD K7 mobile processors. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_POWERNOW_K7_ACPI - bool - depends on X86_POWERNOW_K7 && ACPI_PROCESSOR - depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m) - default y - -config X86_POWERNOW_K8 - tristate "AMD Opteron/Athlon64 PowerNow!" - select CPU_FREQ_TABLE - depends on EXPERIMENTAL - help - This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_POWERNOW_K8_ACPI - bool "ACPI Support" - select ACPI_PROCESSOR - depends on ACPI && X86_POWERNOW_K8 - default y - help - This provides access to the K8s Processor Performance States via ACPI. - This driver is probably required for CPUFreq to work with multi-socket and - SMP systems. It is not required on at least some single-socket yet - multi-core systems, even if SMP is enabled. - - It is safe to say Y here. - -config X86_GX_SUSPMOD - tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" - depends on PCI - help - This add the CPUFreq driver for NatSemi Geode processors which - support suspend modulation. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_SPEEDSTEP_CENTRINO - tristate "Intel Enhanced SpeedStep" - select CPU_FREQ_TABLE - select X86_SPEEDSTEP_CENTRINO_TABLE - help - This adds the CPUFreq driver for Enhanced SpeedStep enabled - mobile CPUs. This means Intel Pentium M (Centrino) CPUs. However, - you also need to say Y to "Use ACPI tables to decode..." below - [which might imply enabling ACPI] if you want to use this driver - on non-Banias CPUs. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_SPEEDSTEP_CENTRINO_TABLE - bool "Built-in tables for Banias CPUs" - depends on X86_SPEEDSTEP_CENTRINO - default y - help - Use built-in tables for Banias CPUs if ACPI encoding - is not available. - - If in doubt, say N. - -config X86_SPEEDSTEP_ICH - tristate "Intel Speedstep on ICH-M chipsets (ioport interface)" - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for certain mobile Intel Pentium III - (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all - mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, - ICH3 or ICH4 southbridge. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_SPEEDSTEP_SMI - tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)" - select CPU_FREQ_TABLE - depends on EXPERIMENTAL - help - This adds the CPUFreq driver for certain mobile Intel Pentium III - (Coppermine), all mobile Intel Pentium III-M (Tualatin) - on systems which have an Intel 440BX/ZX/MX southbridge. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_P4_CLOCKMOD - tristate "Intel Pentium 4 clock modulation" - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for Intel Pentium 4 / XEON - processors. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_CPUFREQ_NFORCE2 - tristate "nVidia nForce2 FSB changing" - depends on EXPERIMENTAL - help - This adds the CPUFreq driver for FSB changing on nVidia nForce2 - platforms. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_LONGRUN - tristate "Transmeta LongRun" - help - This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors - which support LongRun. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_LONGHAUL - tristate "VIA Cyrix III Longhaul" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This adds the CPUFreq driver for VIA Samuel/CyrixIII, - VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T - processors. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -config X86_E_POWERSAVER - tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)" - select CPU_FREQ_TABLE - depends on EXPERIMENTAL - help - This adds the CPUFreq driver for VIA C7 processors. - - If in doubt, say N. - -comment "shared options" - -config X86_ACPI_CPUFREQ_PROC_INTF - bool "/proc/acpi/processor/../performance interface (deprecated)" - depends on PROC_FS - depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI - help - This enables the deprecated /proc/acpi/processor/../performance - interface. While it is helpful for debugging, the generic, - cross-architecture cpufreq interfaces should be used. - - If in doubt, say N. - -config X86_SPEEDSTEP_LIB - tristate - default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD - -config X86_SPEEDSTEP_RELAXED_CAP_CHECK - bool "Relaxed speedstep capability checks" - depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) - help - Don't perform all checks for a speedstep capable system which would - normally be done. Some ancient or strange systems, though speedstep - capable, don't always indicate that they are speedstep capable. This - option lets the probing code bypass some of those checks if the - parameter "relaxed_check=1" is passed to the module. - -endif # CPU_FREQ - -endmenu diff --git a/arch/i386/kernel/cpu/cpufreq/Makefile b/arch/i386/kernel/cpu/cpufreq/Makefile deleted file mode 100644 index 560f7760dae5..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o -obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o -obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o -obj-$(CONFIG_X86_LONGHAUL) += longhaul.o -obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o -obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o -obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o -obj-$(CONFIG_X86_LONGRUN) += longrun.o -obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o -obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o -obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o -obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o -obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o -obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o -obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o -obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c deleted file mode 100644 index 705e13a30781..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c +++ /dev/null @@ -1,799 +0,0 @@ -/* - * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.4 $) - * - * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> - * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> - * Copyright (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de> - * Copyright (C) 2006 Denis Sadykov <denis.m.sadykov@intel.com> - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/sched.h> -#include <linux/cpufreq.h> -#include <linux/compiler.h> -#include <linux/dmi.h> - -#include <linux/acpi.h> -#include <acpi/processor.h> - -#include <asm/io.h> -#include <asm/msr.h> -#include <asm/processor.h> -#include <asm/cpufeature.h> -#include <asm/delay.h> -#include <asm/uaccess.h> - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg) - -MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski"); -MODULE_DESCRIPTION("ACPI Processor P-States Driver"); -MODULE_LICENSE("GPL"); - -enum { - UNDEFINED_CAPABLE = 0, - SYSTEM_INTEL_MSR_CAPABLE, - SYSTEM_IO_CAPABLE, -}; - -#define INTEL_MSR_RANGE (0xffff) -#define CPUID_6_ECX_APERFMPERF_CAPABILITY (0x1) - -struct acpi_cpufreq_data { - struct acpi_processor_performance *acpi_data; - struct cpufreq_frequency_table *freq_table; - unsigned int max_freq; - unsigned int resume; - unsigned int cpu_feature; -}; - -static struct acpi_cpufreq_data *drv_data[NR_CPUS]; -/* acpi_perf_data is a pointer to percpu data. */ -static struct acpi_processor_performance *acpi_perf_data; - -static struct cpufreq_driver acpi_cpufreq_driver; - -static unsigned int acpi_pstate_strict; - -static int check_est_cpu(unsigned int cpuid) -{ - struct cpuinfo_x86 *cpu = &cpu_data[cpuid]; - - if (cpu->x86_vendor != X86_VENDOR_INTEL || - !cpu_has(cpu, X86_FEATURE_EST)) - return 0; - - return 1; -} - -static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data) -{ - struct acpi_processor_performance *perf; - int i; - - perf = data->acpi_data; - - for (i=0; i<perf->state_count; i++) { - if (value == perf->states[i].status) - return data->freq_table[i].frequency; - } - return 0; -} - -static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data) -{ - int i; - struct acpi_processor_performance *perf; - - msr &= INTEL_MSR_RANGE; - perf = data->acpi_data; - - for (i=0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { - if (msr == perf->states[data->freq_table[i].index].status) - return data->freq_table[i].frequency; - } - return data->freq_table[0].frequency; -} - -static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data) -{ - switch (data->cpu_feature) { - case SYSTEM_INTEL_MSR_CAPABLE: - return extract_msr(val, data); - case SYSTEM_IO_CAPABLE: - return extract_io(val, data); - default: - return 0; - } -} - -struct msr_addr { - u32 reg; -}; - -struct io_addr { - u16 port; - u8 bit_width; -}; - -typedef union { - struct msr_addr msr; - struct io_addr io; -} drv_addr_union; - -struct drv_cmd { - unsigned int type; - cpumask_t mask; - drv_addr_union addr; - u32 val; -}; - -static void do_drv_read(struct drv_cmd *cmd) -{ - u32 h; - - switch (cmd->type) { - case SYSTEM_INTEL_MSR_CAPABLE: - rdmsr(cmd->addr.msr.reg, cmd->val, h); - break; - case SYSTEM_IO_CAPABLE: - acpi_os_read_port((acpi_io_address)cmd->addr.io.port, - &cmd->val, - (u32)cmd->addr.io.bit_width); - break; - default: - break; - } -} - -static void do_drv_write(struct drv_cmd *cmd) -{ - u32 lo, hi; - - switch (cmd->type) { - case SYSTEM_INTEL_MSR_CAPABLE: - rdmsr(cmd->addr.msr.reg, lo, hi); - lo = (lo & ~INTEL_MSR_RANGE) | (cmd->val & INTEL_MSR_RANGE); - wrmsr(cmd->addr.msr.reg, lo, hi); - break; - case SYSTEM_IO_CAPABLE: - acpi_os_write_port((acpi_io_address)cmd->addr.io.port, - cmd->val, - (u32)cmd->addr.io.bit_width); - break; - default: - break; - } -} - -static void drv_read(struct drv_cmd *cmd) -{ - cpumask_t saved_mask = current->cpus_allowed; - cmd->val = 0; - - set_cpus_allowed(current, cmd->mask); - do_drv_read(cmd); - set_cpus_allowed(current, saved_mask); -} - -static void drv_write(struct drv_cmd *cmd) -{ - cpumask_t saved_mask = current->cpus_allowed; - unsigned int i; - - for_each_cpu_mask(i, cmd->mask) { - set_cpus_allowed(current, cpumask_of_cpu(i)); - do_drv_write(cmd); - } - - set_cpus_allowed(current, saved_mask); - return; -} - -static u32 get_cur_val(cpumask_t mask) -{ - struct acpi_processor_performance *perf; - struct drv_cmd cmd; - - if (unlikely(cpus_empty(mask))) - return 0; - - switch (drv_data[first_cpu(mask)]->cpu_feature) { - case SYSTEM_INTEL_MSR_CAPABLE: - cmd.type = SYSTEM_INTEL_MSR_CAPABLE; - cmd.addr.msr.reg = MSR_IA32_PERF_STATUS; - break; - case SYSTEM_IO_CAPABLE: - cmd.type = SYSTEM_IO_CAPABLE; - perf = drv_data[first_cpu(mask)]->acpi_data; - cmd.addr.io.port = perf->control_register.address; - cmd.addr.io.bit_width = perf->control_register.bit_width; - break; - default: - return 0; - } - - cmd.mask = mask; - - drv_read(&cmd); - - dprintk("get_cur_val = %u\n", cmd.val); - - return cmd.val; -} - -/* - * Return the measured active (C0) frequency on this CPU since last call - * to this function. - * Input: cpu number - * Return: Average CPU frequency in terms of max frequency (zero on error) - * - * We use IA32_MPERF and IA32_APERF MSRs to get the measured performance - * over a period of time, while CPU is in C0 state. - * IA32_MPERF counts at the rate of max advertised frequency - * IA32_APERF counts at the rate of actual CPU frequency - * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and - * no meaning should be associated with absolute values of these MSRs. - */ -static unsigned int get_measured_perf(unsigned int cpu) -{ - union { - struct { - u32 lo; - u32 hi; - } split; - u64 whole; - } aperf_cur, mperf_cur; - - cpumask_t saved_mask; - unsigned int perf_percent; - unsigned int retval; - - saved_mask = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); - if (get_cpu() != cpu) { - /* We were not able to run on requested processor */ - put_cpu(); - return 0; - } - - rdmsr(MSR_IA32_APERF, aperf_cur.split.lo, aperf_cur.split.hi); - rdmsr(MSR_IA32_MPERF, mperf_cur.split.lo, mperf_cur.split.hi); - - wrmsr(MSR_IA32_APERF, 0,0); - wrmsr(MSR_IA32_MPERF, 0,0); - -#ifdef __i386__ - /* - * We dont want to do 64 bit divide with 32 bit kernel - * Get an approximate value. Return failure in case we cannot get - * an approximate value. - */ - if (unlikely(aperf_cur.split.hi || mperf_cur.split.hi)) { - int shift_count; - u32 h; - - h = max_t(u32, aperf_cur.split.hi, mperf_cur.split.hi); - shift_count = fls(h); - - aperf_cur.whole >>= shift_count; - mperf_cur.whole >>= shift_count; - } - - if (((unsigned long)(-1) / 100) < aperf_cur.split.lo) { - int shift_count = 7; - aperf_cur.split.lo >>= shift_count; - mperf_cur.split.lo >>= shift_count; - } - - if (aperf_cur.split.lo && mperf_cur.split.lo) - perf_percent = (aperf_cur.split.lo * 100) / mperf_cur.split.lo; - else - perf_percent = 0; - -#else - if (unlikely(((unsigned long)(-1) / 100) < aperf_cur.whole)) { - int shift_count = 7; - aperf_cur.whole >>= shift_count; - mperf_cur.whole >>= shift_count; - } - - if (aperf_cur.whole && mperf_cur.whole) - perf_percent = (aperf_cur.whole * 100) / mperf_cur.whole; - else - perf_percent = 0; - -#endif - - retval = drv_data[cpu]->max_freq * perf_percent / 100; - - put_cpu(); - set_cpus_allowed(current, saved_mask); - - dprintk("cpu %d: performance percent %d\n", cpu, perf_percent); - return retval; -} - -static unsigned int get_cur_freq_on_cpu(unsigned int cpu) -{ - struct acpi_cpufreq_data *data = drv_data[cpu]; - unsigned int freq; - - dprintk("get_cur_freq_on_cpu (%d)\n", cpu); - - if (unlikely(data == NULL || - data->acpi_data == NULL || data->freq_table == NULL)) { - return 0; - } - - freq = extract_freq(get_cur_val(cpumask_of_cpu(cpu)), data); - dprintk("cur freq = %u\n", freq); - - return freq; -} - -static unsigned int check_freqs(cpumask_t mask, unsigned int freq, - struct acpi_cpufreq_data *data) -{ - unsigned int cur_freq; - unsigned int i; - - for (i=0; i<100; i++) { - cur_freq = extract_freq(get_cur_val(mask), data); - if (cur_freq == freq) - return 1; - udelay(10); - } - return 0; -} - -static int acpi_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - struct acpi_cpufreq_data *data = drv_data[policy->cpu]; - struct acpi_processor_performance *perf; - struct cpufreq_freqs freqs; - cpumask_t online_policy_cpus; - struct drv_cmd cmd; - unsigned int next_state = 0; /* Index into freq_table */ - unsigned int next_perf_state = 0; /* Index into perf table */ - unsigned int i; - int result = 0; - - dprintk("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu); - - if (unlikely(data == NULL || - data->acpi_data == NULL || data->freq_table == NULL)) { - return -ENODEV; - } - - perf = data->acpi_data; - result = cpufreq_frequency_table_target(policy, - data->freq_table, - target_freq, - relation, &next_state); - if (unlikely(result)) - return -ENODEV; - -#ifdef CONFIG_HOTPLUG_CPU - /* cpufreq holds the hotplug lock, so we are safe from here on */ - cpus_and(online_policy_cpus, cpu_online_map, policy->cpus); -#else - online_policy_cpus = policy->cpus; -#endif - - next_perf_state = data->freq_table[next_state].index; - if (perf->state == next_perf_state) { - if (unlikely(data->resume)) { - dprintk("Called after resume, resetting to P%d\n", - next_perf_state); - data->resume = 0; - } else { - dprintk("Already at target state (P%d)\n", - next_perf_state); - return 0; - } - } - - switch (data->cpu_feature) { - case SYSTEM_INTEL_MSR_CAPABLE: - cmd.type = SYSTEM_INTEL_MSR_CAPABLE; - cmd.addr.msr.reg = MSR_IA32_PERF_CTL; - cmd.val = (u32) perf->states[next_perf_state].control; - break; - case SYSTEM_IO_CAPABLE: - cmd.type = SYSTEM_IO_CAPABLE; - cmd.addr.io.port = perf->control_register.address; - cmd.addr.io.bit_width = perf->control_register.bit_width; - cmd.val = (u32) perf->states[next_perf_state].control; - break; - default: - return -ENODEV; - } - - cpus_clear(cmd.mask); - - if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY) - cmd.mask = online_policy_cpus; - else - cpu_set(policy->cpu, cmd.mask); - - freqs.old = perf->states[perf->state].core_frequency * 1000; - freqs.new = data->freq_table[next_state].frequency; - for_each_cpu_mask(i, cmd.mask) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - drv_write(&cmd); - - if (acpi_pstate_strict) { - if (!check_freqs(cmd.mask, freqs.new, data)) { - dprintk("acpi_cpufreq_target failed (%d)\n", - policy->cpu); - return -EAGAIN; - } - } - - for_each_cpu_mask(i, cmd.mask) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - perf->state = next_perf_state; - - return result; -} - -static int acpi_cpufreq_verify(struct cpufreq_policy *policy) -{ - struct acpi_cpufreq_data *data = drv_data[policy->cpu]; - - dprintk("acpi_cpufreq_verify\n"); - - return cpufreq_frequency_table_verify(policy, data->freq_table); -} - -static unsigned long -acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu) -{ - struct acpi_processor_performance *perf = data->acpi_data; - - if (cpu_khz) { - /* search the closest match to cpu_khz */ - unsigned int i; - unsigned long freq; - unsigned long freqn = perf->states[0].core_frequency * 1000; - - for (i=0; i<(perf->state_count-1); i++) { - freq = freqn; - freqn = perf->states[i+1].core_frequency * 1000; - if ((2 * cpu_khz) > (freqn + freq)) { - perf->state = i; - return freq; - } - } - perf->state = perf->state_count-1; - return freqn; - } else { - /* assume CPU is at P0... */ - perf->state = 0; - return perf->states[0].core_frequency * 1000; - } -} - -/* - * acpi_cpufreq_early_init - initialize ACPI P-States library - * - * Initialize the ACPI P-States library (drivers/acpi/processor_perflib.c) - * in order to determine correct frequency and voltage pairings. We can - * do _PDC and _PSD and find out the processor dependency for the - * actual init that will happen later... - */ -static int __init acpi_cpufreq_early_init(void) -{ - dprintk("acpi_cpufreq_early_init\n"); - - acpi_perf_data = alloc_percpu(struct acpi_processor_performance); - if (!acpi_perf_data) { - dprintk("Memory allocation error for acpi_perf_data.\n"); - return -ENOMEM; - } - - /* Do initialization in ACPI core */ - acpi_processor_preregister_performance(acpi_perf_data); - return 0; -} - -#ifdef CONFIG_SMP -/* - * Some BIOSes do SW_ANY coordination internally, either set it up in hw - * or do it in BIOS firmware and won't inform about it to OS. If not - * detected, this has a side effect of making CPU run at a different speed - * than OS intended it to run at. Detect it and handle it cleanly. - */ -static int bios_with_sw_any_bug; - -static int sw_any_bug_found(struct dmi_system_id *d) -{ - bios_with_sw_any_bug = 1; - return 0; -} - -static struct dmi_system_id sw_any_bug_dmi_table[] = { - { - .callback = sw_any_bug_found, - .ident = "Supermicro Server X6DLP", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"), - DMI_MATCH(DMI_BIOS_VERSION, "080010"), - DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"), - }, - }, - { } -}; -#endif - -static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int i; - unsigned int valid_states = 0; - unsigned int cpu = policy->cpu; - struct acpi_cpufreq_data *data; - unsigned int result = 0; - struct cpuinfo_x86 *c = &cpu_data[policy->cpu]; - struct acpi_processor_performance *perf; - - dprintk("acpi_cpufreq_cpu_init\n"); - - data = kzalloc(sizeof(struct acpi_cpufreq_data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->acpi_data = percpu_ptr(acpi_perf_data, cpu); - drv_data[cpu] = data; - - if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) - acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS; - - result = acpi_processor_register_performance(data->acpi_data, cpu); - if (result) - goto err_free; - - perf = data->acpi_data; - policy->shared_type = perf->shared_type; - - /* - * Will let policy->cpus know about dependency only when software - * coordination is required. - */ - if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL || - policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { - policy->cpus = perf->shared_cpu_map; - } - -#ifdef CONFIG_SMP - dmi_check_system(sw_any_bug_dmi_table); - if (bios_with_sw_any_bug && cpus_weight(policy->cpus) == 1) { - policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; - policy->cpus = cpu_core_map[cpu]; - } -#endif - - /* capability check */ - if (perf->state_count <= 1) { - dprintk("No P-States\n"); - result = -ENODEV; - goto err_unreg; - } - - if (perf->control_register.space_id != perf->status_register.space_id) { - result = -ENODEV; - goto err_unreg; - } - - switch (perf->control_register.space_id) { - case ACPI_ADR_SPACE_SYSTEM_IO: - dprintk("SYSTEM IO addr space\n"); - data->cpu_feature = SYSTEM_IO_CAPABLE; - break; - case ACPI_ADR_SPACE_FIXED_HARDWARE: - dprintk("HARDWARE addr space\n"); - if (!check_est_cpu(cpu)) { - result = -ENODEV; - goto err_unreg; - } - data->cpu_feature = SYSTEM_INTEL_MSR_CAPABLE; - break; - default: - dprintk("Unknown addr space %d\n", - (u32) (perf->control_register.space_id)); - result = -ENODEV; - goto err_unreg; - } - - data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) * - (perf->state_count+1), GFP_KERNEL); - if (!data->freq_table) { - result = -ENOMEM; - goto err_unreg; - } - - /* detect transition latency */ - policy->cpuinfo.transition_latency = 0; - for (i=0; i<perf->state_count; i++) { - if ((perf->states[i].transition_latency * 1000) > - policy->cpuinfo.transition_latency) - policy->cpuinfo.transition_latency = - perf->states[i].transition_latency * 1000; - } - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - data->max_freq = perf->states[0].core_frequency * 1000; - /* table init */ - for (i=0; i<perf->state_count; i++) { - if (i>0 && perf->states[i].core_frequency >= - data->freq_table[valid_states-1].frequency / 1000) - continue; - - data->freq_table[valid_states].index = i; - data->freq_table[valid_states].frequency = - perf->states[i].core_frequency * 1000; - valid_states++; - } - data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END; - perf->state = 0; - - result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table); - if (result) - goto err_freqfree; - - switch (perf->control_register.space_id) { - case ACPI_ADR_SPACE_SYSTEM_IO: - /* Current speed is unknown and not detectable by IO port */ - policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu); - break; - case ACPI_ADR_SPACE_FIXED_HARDWARE: - acpi_cpufreq_driver.get = get_cur_freq_on_cpu; - policy->cur = get_cur_freq_on_cpu(cpu); - break; - default: - break; - } - - /* notify BIOS that we exist */ - acpi_processor_notify_smm(THIS_MODULE); - - /* Check for APERF/MPERF support in hardware */ - if (c->x86_vendor == X86_VENDOR_INTEL && c->cpuid_level >= 6) { - unsigned int ecx; - ecx = cpuid_ecx(6); - if (ecx & CPUID_6_ECX_APERFMPERF_CAPABILITY) - acpi_cpufreq_driver.getavg = get_measured_perf; - } - - dprintk("CPU%u - ACPI performance management activated.\n", cpu); - for (i = 0; i < perf->state_count; i++) - dprintk(" %cP%d: %d MHz, %d mW, %d uS\n", - (i == perf->state ? '*' : ' '), i, - (u32) perf->states[i].core_frequency, - (u32) perf->states[i].power, - (u32) perf->states[i].transition_latency); - - cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu); - - /* - * the first call to ->target() should result in us actually - * writing something to the appropriate registers. - */ - data->resume = 1; - - return result; - -err_freqfree: - kfree(data->freq_table); -err_unreg: - acpi_processor_unregister_performance(perf, cpu); -err_free: - kfree(data); - drv_data[cpu] = NULL; - - return result; -} - -static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy) -{ - struct acpi_cpufreq_data *data = drv_data[policy->cpu]; - - dprintk("acpi_cpufreq_cpu_exit\n"); - - if (data) { - cpufreq_frequency_table_put_attr(policy->cpu); - drv_data[policy->cpu] = NULL; - acpi_processor_unregister_performance(data->acpi_data, - policy->cpu); - kfree(data); - } - - return 0; -} - -static int acpi_cpufreq_resume(struct cpufreq_policy *policy) -{ - struct acpi_cpufreq_data *data = drv_data[policy->cpu]; - - dprintk("acpi_cpufreq_resume\n"); - - data->resume = 1; - - return 0; -} - -static struct freq_attr *acpi_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver acpi_cpufreq_driver = { - .verify = acpi_cpufreq_verify, - .target = acpi_cpufreq_target, - .init = acpi_cpufreq_cpu_init, - .exit = acpi_cpufreq_cpu_exit, - .resume = acpi_cpufreq_resume, - .name = "acpi-cpufreq", - .owner = THIS_MODULE, - .attr = acpi_cpufreq_attr, -}; - -static int __init acpi_cpufreq_init(void) -{ - int ret; - - dprintk("acpi_cpufreq_init\n"); - - ret = acpi_cpufreq_early_init(); - if (ret) - return ret; - - return cpufreq_register_driver(&acpi_cpufreq_driver); -} - -static void __exit acpi_cpufreq_exit(void) -{ - dprintk("acpi_cpufreq_exit\n"); - - cpufreq_unregister_driver(&acpi_cpufreq_driver); - - free_percpu(acpi_perf_data); - - return; -} - -module_param(acpi_pstate_strict, uint, 0644); -MODULE_PARM_DESC(acpi_pstate_strict, - "value 0 or non-zero. non-zero -> strict ACPI checks are " - "performed during frequency changes."); - -late_initcall(acpi_cpufreq_init); -module_exit(acpi_cpufreq_exit); - -MODULE_ALIAS("acpi"); diff --git a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c deleted file mode 100644 index 66acd5039918..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ /dev/null @@ -1,441 +0,0 @@ -/* - * (C) 2004-2006 Sebastian Witt <se.witt@gmx.net> - * - * Licensed under the terms of the GNU GPL License version 2. - * Based upon reverse engineered information - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/pci.h> -#include <linux/delay.h> - -#define NFORCE2_XTAL 25 -#define NFORCE2_BOOTFSB 0x48 -#define NFORCE2_PLLENABLE 0xa8 -#define NFORCE2_PLLREG 0xa4 -#define NFORCE2_PLLADR 0xa0 -#define NFORCE2_PLL(mul, div) (0x100000 | (mul << 8) | div) - -#define NFORCE2_MIN_FSB 50 -#define NFORCE2_SAFE_DISTANCE 50 - -/* Delay in ms between FSB changes */ -//#define NFORCE2_DELAY 10 - -/* nforce2_chipset: - * FSB is changed using the chipset - */ -static struct pci_dev *nforce2_chipset_dev; - -/* fid: - * multiplier * 10 - */ -static int fid = 0; - -/* min_fsb, max_fsb: - * minimum and maximum FSB (= FSB at boot time) - */ -static int min_fsb = 0; -static int max_fsb = 0; - -MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>"); -MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver"); -MODULE_LICENSE("GPL"); - -module_param(fid, int, 0444); -module_param(min_fsb, int, 0444); - -MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); -MODULE_PARM_DESC(min_fsb, - "Minimum FSB to use, if not defined: current FSB - 50"); - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg) - -/** - * nforce2_calc_fsb - calculate FSB - * @pll: PLL value - * - * Calculates FSB from PLL value - */ -static int nforce2_calc_fsb(int pll) -{ - unsigned char mul, div; - - mul = (pll >> 8) & 0xff; - div = pll & 0xff; - - if (div > 0) - return NFORCE2_XTAL * mul / div; - - return 0; -} - -/** - * nforce2_calc_pll - calculate PLL value - * @fsb: FSB - * - * Calculate PLL value for given FSB - */ -static int nforce2_calc_pll(unsigned int fsb) -{ - unsigned char xmul, xdiv; - unsigned char mul = 0, div = 0; - int tried = 0; - - /* Try to calculate multiplier and divider up to 4 times */ - while (((mul == 0) || (div == 0)) && (tried <= 3)) { - for (xdiv = 2; xdiv <= 0x80; xdiv++) - for (xmul = 1; xmul <= 0xfe; xmul++) - if (nforce2_calc_fsb(NFORCE2_PLL(xmul, xdiv)) == - fsb + tried) { - mul = xmul; - div = xdiv; - } - tried++; - } - - if ((mul == 0) || (div == 0)) - return -1; - - return NFORCE2_PLL(mul, div); -} - -/** - * nforce2_write_pll - write PLL value to chipset - * @pll: PLL value - * - * Writes new FSB PLL value to chipset - */ -static void nforce2_write_pll(int pll) -{ - int temp; - - /* Set the pll addr. to 0x00 */ - pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, 0); - - /* Now write the value in all 64 registers */ - for (temp = 0; temp <= 0x3f; temp++) - pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, pll); - - return; -} - -/** - * nforce2_fsb_read - Read FSB - * - * Read FSB from chipset - * If bootfsb != 0, return FSB at boot-time - */ -static unsigned int nforce2_fsb_read(int bootfsb) -{ - struct pci_dev *nforce2_sub5; - u32 fsb, temp = 0; - - /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ - nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - 0x01EF,PCI_ANY_ID,PCI_ANY_ID,NULL); - if (!nforce2_sub5) - return 0; - - pci_read_config_dword(nforce2_sub5, NFORCE2_BOOTFSB, &fsb); - fsb /= 1000000; - - /* Check if PLL register is already set */ - pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); - - if(bootfsb || !temp) - return fsb; - - /* Use PLL register FSB value */ - pci_read_config_dword(nforce2_chipset_dev,NFORCE2_PLLREG, &temp); - fsb = nforce2_calc_fsb(temp); - - return fsb; -} - -/** - * nforce2_set_fsb - set new FSB - * @fsb: New FSB - * - * Sets new FSB - */ -static int nforce2_set_fsb(unsigned int fsb) -{ - u32 temp = 0; - unsigned int tfsb; - int diff; - int pll = 0; - - if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) { - printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb); - return -EINVAL; - } - - tfsb = nforce2_fsb_read(0); - if (!tfsb) { - printk(KERN_ERR "cpufreq: Error while reading the FSB\n"); - return -EINVAL; - } - - /* First write? Then set actual value */ - pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp); - if (!temp) { - pll = nforce2_calc_pll(tfsb); - - if (pll < 0) - return -EINVAL; - - nforce2_write_pll(pll); - } - - /* Enable write access */ - temp = 0x01; - pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8)temp); - - diff = tfsb - fsb; - - if (!diff) - return 0; - - while ((tfsb != fsb) && (tfsb <= max_fsb) && (tfsb >= min_fsb)) { - if (diff < 0) - tfsb++; - else - tfsb--; - - /* Calculate the PLL reg. value */ - if ((pll = nforce2_calc_pll(tfsb)) == -1) - return -EINVAL; - - nforce2_write_pll(pll); -#ifdef NFORCE2_DELAY - mdelay(NFORCE2_DELAY); -#endif - } - - temp = 0x40; - pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLADR, (u8)temp); - - return 0; -} - -/** - * nforce2_get - get the CPU frequency - * @cpu: CPU number - * - * Returns the CPU frequency - */ -static unsigned int nforce2_get(unsigned int cpu) -{ - if (cpu) - return 0; - return nforce2_fsb_read(0) * fid * 100; -} - -/** - * nforce2_target - set a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * Sets a new CPUFreq policy. - */ -static int nforce2_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ -// unsigned long flags; - struct cpufreq_freqs freqs; - unsigned int target_fsb; - - if ((target_freq > policy->max) || (target_freq < policy->min)) - return -EINVAL; - - target_fsb = target_freq / (fid * 100); - - freqs.old = nforce2_get(policy->cpu); - freqs.new = target_fsb * fid * 100; - freqs.cpu = 0; /* Only one CPU on nForce2 plattforms */ - - if (freqs.old == freqs.new) - return 0; - - dprintk("Old CPU frequency %d kHz, new %d kHz\n", - freqs.old, freqs.new); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* Disable IRQs */ - //local_irq_save(flags); - - if (nforce2_set_fsb(target_fsb) < 0) - printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n", - target_fsb); - else - dprintk("Changed FSB successfully to %d\n", - target_fsb); - - /* Enable IRQs */ - //local_irq_restore(flags); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -/** - * nforce2_verify - verifies a new CPUFreq policy - * @policy: new policy - */ -static int nforce2_verify(struct cpufreq_policy *policy) -{ - unsigned int fsb_pol_max; - - fsb_pol_max = policy->max / (fid * 100); - - if (policy->min < (fsb_pol_max * fid * 100)) - policy->max = (fsb_pol_max + 1) * fid * 100; - - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - return 0; -} - -static int nforce2_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int fsb; - unsigned int rfid; - - /* capability check */ - if (policy->cpu != 0) - return -ENODEV; - - /* Get current FSB */ - fsb = nforce2_fsb_read(0); - - if (!fsb) - return -EIO; - - /* FIX: Get FID from CPU */ - if (!fid) { - if (!cpu_khz) { - printk(KERN_WARNING - "cpufreq: cpu_khz not set, can't calculate multiplier!\n"); - return -ENODEV; - } - - fid = cpu_khz / (fsb * 100); - rfid = fid % 5; - - if (rfid) { - if (rfid > 2) - fid += 5 - rfid; - else - fid -= rfid; - } - } - - printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb, - fid / 10, fid % 10); - - /* Set maximum FSB to FSB at boot time */ - max_fsb = nforce2_fsb_read(1); - - if(!max_fsb) - return -EIO; - - if (!min_fsb) - min_fsb = max_fsb - NFORCE2_SAFE_DISTANCE; - - if (min_fsb < NFORCE2_MIN_FSB) - min_fsb = NFORCE2_MIN_FSB; - - /* cpuinfo and default policy values */ - policy->cpuinfo.min_freq = min_fsb * fid * 100; - policy->cpuinfo.max_freq = max_fsb * fid * 100; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = nforce2_get(policy->cpu); - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - return 0; -} - -static int nforce2_cpu_exit(struct cpufreq_policy *policy) -{ - return 0; -} - -static struct cpufreq_driver nforce2_driver = { - .name = "nforce2", - .verify = nforce2_verify, - .target = nforce2_target, - .get = nforce2_get, - .init = nforce2_cpu_init, - .exit = nforce2_cpu_exit, - .owner = THIS_MODULE, -}; - -/** - * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic - * - * Detects nForce2 A2 and C1 stepping - * - */ -static unsigned int nforce2_detect_chipset(void) -{ - nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_NFORCE2, - PCI_ANY_ID, PCI_ANY_ID, NULL); - - if (nforce2_chipset_dev == NULL) - return -ENODEV; - - printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n", - nforce2_chipset_dev->revision); - printk(KERN_INFO - "cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss.\n"); - - return 0; -} - -/** - * nforce2_init - initializes the nForce2 CPUFreq driver - * - * Initializes the nForce2 FSB support. Returns -ENODEV on unsupported - * devices, -EINVAL on problems during initiatization, and zero on - * success. - */ -static int __init nforce2_init(void) -{ - /* TODO: do we need to detect the processor? */ - - /* detect chipset */ - if (nforce2_detect_chipset()) { - printk(KERN_ERR "cpufreq: No nForce2 chipset.\n"); - return -ENODEV; - } - - return cpufreq_register_driver(&nforce2_driver); -} - -/** - * nforce2_exit - unregisters cpufreq module - * - * Unregisters nForce2 FSB change support. - */ -static void __exit nforce2_exit(void) -{ - cpufreq_unregister_driver(&nforce2_driver); -} - -module_init(nforce2_init); -module_exit(nforce2_exit); - diff --git a/arch/i386/kernel/cpu/cpufreq/e_powersaver.c b/arch/i386/kernel/cpu/cpufreq/e_powersaver.c deleted file mode 100644 index f43d98e11cc7..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/e_powersaver.c +++ /dev/null @@ -1,334 +0,0 @@ -/* - * Based on documentation provided by Dave Jones. Thanks! - * - * Licensed under the terms of the GNU GPL License version 2. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/ioport.h> -#include <linux/slab.h> - -#include <asm/msr.h> -#include <asm/tsc.h> -#include <asm/timex.h> -#include <asm/io.h> -#include <asm/delay.h> - -#define EPS_BRAND_C7M 0 -#define EPS_BRAND_C7 1 -#define EPS_BRAND_EDEN 2 -#define EPS_BRAND_C3 3 - -struct eps_cpu_data { - u32 fsb; - struct cpufreq_frequency_table freq_table[]; -}; - -static struct eps_cpu_data *eps_cpu[NR_CPUS]; - - -static unsigned int eps_get(unsigned int cpu) -{ - struct eps_cpu_data *centaur; - u32 lo, hi; - - if (cpu) - return 0; - centaur = eps_cpu[cpu]; - if (centaur == NULL) - return 0; - - /* Return current frequency */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - return centaur->fsb * ((lo >> 8) & 0xff); -} - -static int eps_set_state(struct eps_cpu_data *centaur, - unsigned int cpu, - u32 dest_state) -{ - struct cpufreq_freqs freqs; - u32 lo, hi; - int err = 0; - int i; - - freqs.old = eps_get(cpu); - freqs.new = centaur->fsb * ((dest_state >> 8) & 0xff); - freqs.cpu = cpu; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* Wait while CPU is busy */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - i = 0; - while (lo & ((1 << 16) | (1 << 17))) { - udelay(16); - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - i++; - if (unlikely(i > 64)) { - err = -ENODEV; - goto postchange; - } - } - /* Set new multiplier and voltage */ - wrmsr(MSR_IA32_PERF_CTL, dest_state & 0xffff, 0); - /* Wait until transition end */ - i = 0; - do { - udelay(16); - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - i++; - if (unlikely(i > 64)) { - err = -ENODEV; - goto postchange; - } - } while (lo & ((1 << 16) | (1 << 17))); - - /* Return current frequency */ -postchange: - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - freqs.new = centaur->fsb * ((lo >> 8) & 0xff); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - return err; -} - -static int eps_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct eps_cpu_data *centaur; - unsigned int newstate = 0; - unsigned int cpu = policy->cpu; - unsigned int dest_state; - int ret; - - if (unlikely(eps_cpu[cpu] == NULL)) - return -ENODEV; - centaur = eps_cpu[cpu]; - - if (unlikely(cpufreq_frequency_table_target(policy, - &eps_cpu[cpu]->freq_table[0], - target_freq, - relation, - &newstate))) { - return -EINVAL; - } - - /* Make frequency transition */ - dest_state = centaur->freq_table[newstate].index & 0xffff; - ret = eps_set_state(centaur, cpu, dest_state); - if (ret) - printk(KERN_ERR "eps: Timeout!\n"); - return ret; -} - -static int eps_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - &eps_cpu[policy->cpu]->freq_table[0]); -} - -static int eps_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int i; - u32 lo, hi; - u64 val; - u8 current_multiplier, current_voltage; - u8 max_multiplier, max_voltage; - u8 min_multiplier, min_voltage; - u8 brand; - u32 fsb; - struct eps_cpu_data *centaur; - struct cpufreq_frequency_table *f_table; - int k, step, voltage; - int ret; - int states; - - if (policy->cpu != 0) - return -ENODEV; - - /* Check brand */ - printk("eps: Detected VIA "); - rdmsr(0x1153, lo, hi); - brand = (((lo >> 2) ^ lo) >> 18) & 3; - switch(brand) { - case EPS_BRAND_C7M: - printk("C7-M\n"); - break; - case EPS_BRAND_C7: - printk("C7\n"); - break; - case EPS_BRAND_EDEN: - printk("Eden\n"); - break; - case EPS_BRAND_C3: - printk("C3\n"); - return -ENODEV; - break; - } - /* Enable Enhanced PowerSaver */ - rdmsrl(MSR_IA32_MISC_ENABLE, val); - if (!(val & 1 << 16)) { - val |= 1 << 16; - wrmsrl(MSR_IA32_MISC_ENABLE, val); - /* Can be locked at 0 */ - rdmsrl(MSR_IA32_MISC_ENABLE, val); - if (!(val & 1 << 16)) { - printk("eps: Can't enable Enhanced PowerSaver\n"); - return -ENODEV; - } - } - - /* Print voltage and multiplier */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - current_voltage = lo & 0xff; - printk("eps: Current voltage = %dmV\n", current_voltage * 16 + 700); - current_multiplier = (lo >> 8) & 0xff; - printk("eps: Current multiplier = %d\n", current_multiplier); - - /* Print limits */ - max_voltage = hi & 0xff; - printk("eps: Highest voltage = %dmV\n", max_voltage * 16 + 700); - max_multiplier = (hi >> 8) & 0xff; - printk("eps: Highest multiplier = %d\n", max_multiplier); - min_voltage = (hi >> 16) & 0xff; - printk("eps: Lowest voltage = %dmV\n", min_voltage * 16 + 700); - min_multiplier = (hi >> 24) & 0xff; - printk("eps: Lowest multiplier = %d\n", min_multiplier); - - /* Sanity checks */ - if (current_multiplier == 0 || max_multiplier == 0 - || min_multiplier == 0) - return -EINVAL; - if (current_multiplier > max_multiplier - || max_multiplier <= min_multiplier) - return -EINVAL; - if (current_voltage > 0x1c || max_voltage > 0x1c) - return -EINVAL; - if (max_voltage < min_voltage) - return -EINVAL; - - /* Calc FSB speed */ - fsb = cpu_khz / current_multiplier; - /* Calc number of p-states supported */ - if (brand == EPS_BRAND_C7M) - states = max_multiplier - min_multiplier + 1; - else - states = 2; - - /* Allocate private data and frequency table for current cpu */ - centaur = kzalloc(sizeof(struct eps_cpu_data) - + (states + 1) * sizeof(struct cpufreq_frequency_table), - GFP_KERNEL); - if (!centaur) - return -ENOMEM; - eps_cpu[0] = centaur; - - /* Copy basic values */ - centaur->fsb = fsb; - - /* Fill frequency and MSR value table */ - f_table = ¢aur->freq_table[0]; - if (brand != EPS_BRAND_C7M) { - f_table[0].frequency = fsb * min_multiplier; - f_table[0].index = (min_multiplier << 8) | min_voltage; - f_table[1].frequency = fsb * max_multiplier; - f_table[1].index = (max_multiplier << 8) | max_voltage; - f_table[2].frequency = CPUFREQ_TABLE_END; - } else { - k = 0; - step = ((max_voltage - min_voltage) * 256) - / (max_multiplier - min_multiplier); - for (i = min_multiplier; i <= max_multiplier; i++) { - voltage = (k * step) / 256 + min_voltage; - f_table[k].frequency = fsb * i; - f_table[k].index = (i << 8) | voltage; - k++; - } - f_table[k].frequency = CPUFREQ_TABLE_END; - } - - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */ - policy->cur = fsb * current_multiplier; - - ret = cpufreq_frequency_table_cpuinfo(policy, ¢aur->freq_table[0]); - if (ret) { - kfree(centaur); - return ret; - } - - cpufreq_frequency_table_get_attr(¢aur->freq_table[0], policy->cpu); - return 0; -} - -static int eps_cpu_exit(struct cpufreq_policy *policy) -{ - unsigned int cpu = policy->cpu; - struct eps_cpu_data *centaur; - u32 lo, hi; - - if (eps_cpu[cpu] == NULL) - return -ENODEV; - centaur = eps_cpu[cpu]; - - /* Get max frequency */ - rdmsr(MSR_IA32_PERF_STATUS, lo, hi); - /* Set max frequency */ - eps_set_state(centaur, cpu, hi & 0xffff); - /* Bye */ - cpufreq_frequency_table_put_attr(policy->cpu); - kfree(eps_cpu[cpu]); - eps_cpu[cpu] = NULL; - return 0; -} - -static struct freq_attr* eps_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver eps_driver = { - .verify = eps_verify, - .target = eps_target, - .init = eps_cpu_init, - .exit = eps_cpu_exit, - .get = eps_get, - .name = "e_powersaver", - .owner = THIS_MODULE, - .attr = eps_attr, -}; - -static int __init eps_init(void) -{ - struct cpuinfo_x86 *c = cpu_data; - - /* This driver will work only on Centaur C7 processors with - * Enhanced SpeedStep/PowerSaver registers */ - if (c->x86_vendor != X86_VENDOR_CENTAUR - || c->x86 != 6 || c->x86_model != 10) - return -ENODEV; - if (!cpu_has(c, X86_FEATURE_EST)) - return -ENODEV; - - if (cpufreq_register_driver(&eps_driver)) - return -EINVAL; - return 0; -} - -static void __exit eps_exit(void) -{ - cpufreq_unregister_driver(&eps_driver); -} - -MODULE_AUTHOR("Rafa³ Bilski <rafalbilski@interia.pl>"); -MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's."); -MODULE_LICENSE("GPL"); - -module_init(eps_init); -module_exit(eps_exit); diff --git a/arch/i386/kernel/cpu/cpufreq/elanfreq.c b/arch/i386/kernel/cpu/cpufreq/elanfreq.c deleted file mode 100644 index f317276afa7a..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/elanfreq.c +++ /dev/null @@ -1,309 +0,0 @@ -/* - * elanfreq: cpufreq driver for the AMD ELAN family - * - * (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de> - * - * Parts of this code are (c) Sven Geggus <sven@geggus.net> - * - * All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> - -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/cpufreq.h> - -#include <asm/msr.h> -#include <asm/timex.h> -#include <asm/io.h> - -#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ -#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */ - -/* Module parameter */ -static int max_freq; - -struct s_elan_multiplier { - int clock; /* frequency in kHz */ - int val40h; /* PMU Force Mode register */ - int val80h; /* CPU Clock Speed Register */ -}; - -/* - * It is important that the frequencies - * are listed in ascending order here! - */ -struct s_elan_multiplier elan_multiplier[] = { - {1000, 0x02, 0x18}, - {2000, 0x02, 0x10}, - {4000, 0x02, 0x08}, - {8000, 0x00, 0x00}, - {16000, 0x00, 0x02}, - {33000, 0x00, 0x04}, - {66000, 0x01, 0x04}, - {99000, 0x01, 0x05} -}; - -static struct cpufreq_frequency_table elanfreq_table[] = { - {0, 1000}, - {1, 2000}, - {2, 4000}, - {3, 8000}, - {4, 16000}, - {5, 33000}, - {6, 66000}, - {7, 99000}, - {0, CPUFREQ_TABLE_END}, -}; - - -/** - * elanfreq_get_cpu_frequency: determine current cpu speed - * - * Finds out at which frequency the CPU of the Elan SOC runs - * at the moment. Frequencies from 1 to 33 MHz are generated - * the normal way, 66 and 99 MHz are called "Hyperspeed Mode" - * and have the rest of the chip running with 33 MHz. - */ - -static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) -{ - u8 clockspeed_reg; /* Clock Speed Register */ - - local_irq_disable(); - outb_p(0x80,REG_CSCIR); - clockspeed_reg = inb_p(REG_CSCDR); - local_irq_enable(); - - if ((clockspeed_reg & 0xE0) == 0xE0) - return 0; - - /* Are we in CPU clock multiplied mode (66/99 MHz)? */ - if ((clockspeed_reg & 0xE0) == 0xC0) { - if ((clockspeed_reg & 0x01) == 0) - return 66000; - else - return 99000; - } - - /* 33 MHz is not 32 MHz... */ - if ((clockspeed_reg & 0xE0)==0xA0) - return 33000; - - return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000); -} - - -/** - * elanfreq_set_cpu_frequency: Change the CPU core frequency - * @cpu: cpu number - * @freq: frequency in kHz - * - * This function takes a frequency value and changes the CPU frequency - * according to this. Note that the frequency has to be checked by - * elanfreq_validatespeed() for correctness! - * - * There is no return value. - */ - -static void elanfreq_set_cpu_state (unsigned int state) -{ - struct cpufreq_freqs freqs; - - freqs.old = elanfreq_get_cpu_frequency(0); - freqs.new = elan_multiplier[state].clock; - freqs.cpu = 0; /* elanfreq.c is UP only driver */ - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n", - elan_multiplier[state].clock); - - - /* - * Access to the Elan's internal registers is indexed via - * 0x22: Chip Setup & Control Register Index Register (CSCI) - * 0x23: Chip Setup & Control Register Data Register (CSCD) - * - */ - - /* - * 0x40 is the Power Management Unit's Force Mode Register. - * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency) - */ - - local_irq_disable(); - outb_p(0x40,REG_CSCIR); /* Disable hyperspeed mode */ - outb_p(0x00,REG_CSCDR); - local_irq_enable(); /* wait till internal pipelines and */ - udelay(1000); /* buffers have cleaned up */ - - local_irq_disable(); - - /* now, set the CPU clock speed register (0x80) */ - outb_p(0x80,REG_CSCIR); - outb_p(elan_multiplier[state].val80h,REG_CSCDR); - - /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */ - outb_p(0x40,REG_CSCIR); - outb_p(elan_multiplier[state].val40h,REG_CSCDR); - udelay(10000); - local_irq_enable(); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); -}; - - -/** - * elanfreq_validatespeed: test if frequency range is valid - * @policy: the policy to validate - * - * This function checks if a given frequency range in kHz is valid - * for the hardware supported by the driver. - */ - -static int elanfreq_verify (struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]); -} - -static int elanfreq_target (struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate)) - return -EINVAL; - - elanfreq_set_cpu_state(newstate); - - return 0; -} - - -/* - * Module init and exit code - */ - -static int elanfreq_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *c = cpu_data; - unsigned int i; - int result; - - /* capability check */ - if ((c->x86_vendor != X86_VENDOR_AMD) || - (c->x86 != 4) || (c->x86_model!=10)) - return -ENODEV; - - /* max freq */ - if (!max_freq) - max_freq = elanfreq_get_cpu_frequency(0); - - /* table init */ - for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) { - if (elanfreq_table[i].frequency > max_freq) - elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID; - } - - /* cpuinfo and default policy values */ - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = elanfreq_get_cpu_frequency(0); - - result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table); - if (result) - return (result); - - cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu); - return 0; -} - - -static int elanfreq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - - -#ifndef MODULE -/** - * elanfreq_setup - elanfreq command line parameter parsing - * - * elanfreq command line parameter. Use: - * elanfreq=66000 - * to set the maximum CPU frequency to 66 MHz. Note that in - * case you do not give this boot parameter, the maximum - * frequency will fall back to _current_ CPU frequency which - * might be lower. If you build this as a module, use the - * max_freq module parameter instead. - */ -static int __init elanfreq_setup(char *str) -{ - max_freq = simple_strtoul(str, &str, 0); - printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n"); - return 1; -} -__setup("elanfreq=", elanfreq_setup); -#endif - - -static struct freq_attr* elanfreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - -static struct cpufreq_driver elanfreq_driver = { - .get = elanfreq_get_cpu_frequency, - .verify = elanfreq_verify, - .target = elanfreq_target, - .init = elanfreq_cpu_init, - .exit = elanfreq_cpu_exit, - .name = "elanfreq", - .owner = THIS_MODULE, - .attr = elanfreq_attr, -}; - - -static int __init elanfreq_init(void) -{ - struct cpuinfo_x86 *c = cpu_data; - - /* Test if we have the right hardware */ - if ((c->x86_vendor != X86_VENDOR_AMD) || - (c->x86 != 4) || (c->x86_model!=10)) { - printk(KERN_INFO "elanfreq: error: no Elan processor found!\n"); - return -ENODEV; - } - return cpufreq_register_driver(&elanfreq_driver); -} - - -static void __exit elanfreq_exit(void) -{ - cpufreq_unregister_driver(&elanfreq_driver); -} - - -module_param (max_freq, int, 0444); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>"); -MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs"); - -module_init(elanfreq_init); -module_exit(elanfreq_exit); diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c deleted file mode 100644 index 461dabc4e495..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c +++ /dev/null @@ -1,495 +0,0 @@ -/* - * Cyrix MediaGX and NatSemi Geode Suspend Modulation - * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> - * (C) 2002 Hiroshi Miura <miura@da-cha.org> - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation - * - * The author(s) of this software shall not be held liable for damages - * of any nature resulting due to the use of this software. This - * software is provided AS-IS with no warranties. - * - * Theoritical note: - * - * (see Geode(tm) CS5530 manual (rev.4.1) page.56) - * - * CPU frequency control on NatSemi Geode GX1/GXLV processor and CS55x0 - * are based on Suspend Moduration. - * - * Suspend Modulation works by asserting and de-asserting the SUSP# pin - * to CPU(GX1/GXLV) for configurable durations. When asserting SUSP# - * the CPU enters an idle state. GX1 stops its core clock when SUSP# is - * asserted then power consumption is reduced. - * - * Suspend Modulation's OFF/ON duration are configurable - * with 'Suspend Modulation OFF Count Register' - * and 'Suspend Modulation ON Count Register'. - * These registers are 8bit counters that represent the number of - * 32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF) - * to the processor. - * - * These counters define a ratio which is the effective frequency - * of operation of the system. - * - * OFF Count - * F_eff = Fgx * ---------------------- - * OFF Count + ON Count - * - * 0 <= On Count, Off Count <= 255 - * - * From these limits, we can get register values - * - * off_duration + on_duration <= MAX_DURATION - * on_duration = off_duration * (stock_freq - freq) / freq - * - * off_duration = (freq * DURATION) / stock_freq - * on_duration = DURATION - off_duration - * - * - *--------------------------------------------------------------------------- - * - * ChangeLog: - * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org> - * - fix on/off register mistake - * - fix cpu_khz calc when it stops cpu modulation. - * - * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org> - * - rewrite for Cyrix MediaGX Cx5510/5520 and - * NatSemi Geode Cs5530(A). - * - * Jul. ??, 2002 Zwane Mwaikambo <zwane@commfireservices.com> - * - cs5530_mod patch for 2.4.19-rc1. - * - *--------------------------------------------------------------------------- - * - * Todo - * Test on machines with 5510, 5530, 5530A - */ - -/************************************************************************ - * Suspend Modulation - Definitions * - ************************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/cpufreq.h> -#include <linux/pci.h> -#include <asm/processor-cyrix.h> -#include <asm/errno.h> - -/* PCI config registers, all at F0 */ -#define PCI_PMER1 0x80 /* power management enable register 1 */ -#define PCI_PMER2 0x81 /* power management enable register 2 */ -#define PCI_PMER3 0x82 /* power management enable register 3 */ -#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */ -#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */ -#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */ -#define PCI_MODON 0x95 /* suspend modulation ON counter register */ -#define PCI_SUSCFG 0x96 /* suspend configuration register */ - -/* PMER1 bits */ -#define GPM (1<<0) /* global power management */ -#define GIT (1<<1) /* globally enable PM device idle timers */ -#define GTR (1<<2) /* globally enable IO traps */ -#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */ -#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */ - -/* SUSCFG bits */ -#define SUSMOD (1<<0) /* enable/disable suspend modulation */ -/* the belows support only with cs5530 (after rev.1.2)/cs5530A */ -#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ - /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ -#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ -/* the belows support only with cs5530A */ -#define PWRSVE_ISA (1<<3) /* stop ISA clock */ -#define PWRSVE (1<<4) /* active idle */ - -struct gxfreq_params { - u8 on_duration; - u8 off_duration; - u8 pci_suscfg; - u8 pci_pmer1; - u8 pci_pmer2; - struct pci_dev *cs55x0; -}; - -static struct gxfreq_params *gx_params; -static int stock_freq; - -/* PCI bus clock - defaults to 30.000 if cpu_khz is not available */ -static int pci_busclk = 0; -module_param (pci_busclk, int, 0444); - -/* maximum duration for which the cpu may be suspended - * (32us * MAX_DURATION). If no parameter is given, this defaults - * to 255. - * Note that this leads to a maximum of 8 ms(!) where the CPU clock - * is suspended -- processing power is just 0.39% of what it used to be, - * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */ -static int max_duration = 255; -module_param (max_duration, int, 0444); - -/* For the default policy, we want at least some processing power - * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV) - */ -#define POLICY_MIN_DIV 20 - - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg) - -/** - * we can detect a core multipiler from dir0_lsb - * from GX1 datasheet p.56, - * MULT[3:0]: - * 0000 = SYSCLK multiplied by 4 (test only) - * 0001 = SYSCLK multiplied by 10 - * 0010 = SYSCLK multiplied by 4 - * 0011 = SYSCLK multiplied by 6 - * 0100 = SYSCLK multiplied by 9 - * 0101 = SYSCLK multiplied by 5 - * 0110 = SYSCLK multiplied by 7 - * 0111 = SYSCLK multiplied by 8 - * of 33.3MHz - **/ -static int gx_freq_mult[16] = { - 4, 10, 4, 6, 9, 5, 7, 8, - 0, 0, 0, 0, 0, 0, 0, 0 -}; - - -/**************************************************************** - * Low Level chipset interface * - ****************************************************************/ -static struct pci_device_id gx_chipset_tbl[] __initdata = { - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID }, - { 0, }, -}; - -/** - * gx_detect_chipset: - * - **/ -static __init struct pci_dev *gx_detect_chipset(void) -{ - struct pci_dev *gx_pci = NULL; - - /* check if CPU is a MediaGX or a Geode. */ - if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) && - (current_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) { - dprintk("error: no MediaGX/Geode processor found!\n"); - return NULL; - } - - /* detect which companion chip is used */ - while ((gx_pci = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, gx_pci)) != NULL) { - if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) - return gx_pci; - } - - dprintk("error: no supported chipset found!\n"); - return NULL; -} - -/** - * gx_get_cpuspeed: - * - * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs. - */ -static unsigned int gx_get_cpuspeed(unsigned int cpu) -{ - if ((gx_params->pci_suscfg & SUSMOD) == 0) - return stock_freq; - - return (stock_freq * gx_params->off_duration) - / (gx_params->on_duration + gx_params->off_duration); -} - -/** - * gx_validate_speed: - * determine current cpu speed - * - **/ - -static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration) -{ - unsigned int i; - u8 tmp_on, tmp_off; - int old_tmp_freq = stock_freq; - int tmp_freq; - - *off_duration=1; - *on_duration=0; - - for (i=max_duration; i>0; i--) { - tmp_off = ((khz * i) / stock_freq) & 0xff; - tmp_on = i - tmp_off; - tmp_freq = (stock_freq * tmp_off) / i; - /* if this relation is closer to khz, use this. If it's equal, - * prefer it, too - lower latency */ - if (abs(tmp_freq - khz) <= abs(old_tmp_freq - khz)) { - *on_duration = tmp_on; - *off_duration = tmp_off; - old_tmp_freq = tmp_freq; - } - } - - return old_tmp_freq; -} - - -/** - * gx_set_cpuspeed: - * set cpu speed in khz. - **/ - -static void gx_set_cpuspeed(unsigned int khz) -{ - u8 suscfg, pmer1; - unsigned int new_khz; - unsigned long flags; - struct cpufreq_freqs freqs; - - freqs.cpu = 0; - freqs.old = gx_get_cpuspeed(0); - - new_khz = gx_validate_speed(khz, &gx_params->on_duration, &gx_params->off_duration); - - freqs.new = new_khz; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - local_irq_save(flags); - - if (new_khz != stock_freq) { /* if new khz == 100% of CPU speed, it is special case */ - switch (gx_params->cs55x0->device) { - case PCI_DEVICE_ID_CYRIX_5530_LEGACY: - pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP; - /* FIXME: need to test other values -- Zwane,Miura */ - pci_write_config_byte(gx_params->cs55x0, PCI_IRQTC, 4); /* typical 2 to 4ms */ - pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */ - pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1); - - if (gx_params->cs55x0->revision < 0x10) { /* CS5530(rev 1.2, 1.3) */ - suscfg = gx_params->pci_suscfg | SUSMOD; - } else { /* CS5530A,B.. */ - suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE; - } - break; - case PCI_DEVICE_ID_CYRIX_5520: - case PCI_DEVICE_ID_CYRIX_5510: - suscfg = gx_params->pci_suscfg | SUSMOD; - break; - default: - local_irq_restore(flags); - dprintk("fatal: try to set unknown chipset.\n"); - return; - } - } else { - suscfg = gx_params->pci_suscfg & ~(SUSMOD); - gx_params->off_duration = 0; - gx_params->on_duration = 0; - dprintk("suspend modulation disabled: cpu runs 100 percent speed.\n"); - } - - pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration); - pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration); - - pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg); - pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); - - local_irq_restore(flags); - - gx_params->pci_suscfg = suscfg; - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n", - gx_params->on_duration * 32, gx_params->off_duration * 32); - dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); -} - -/**************************************************************** - * High level functions * - ****************************************************************/ - -/* - * cpufreq_gx_verify: test if frequency range is valid - * - * This function checks if a given frequency range in kHz is valid - * for the hardware supported by the driver. - */ - -static int cpufreq_gx_verify(struct cpufreq_policy *policy) -{ - unsigned int tmp_freq = 0; - u8 tmp1, tmp2; - - if (!stock_freq || !policy) - return -EINVAL; - - policy->cpu = 0; - cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); - - /* it needs to be assured that at least one supported frequency is - * within policy->min and policy->max. If it is not, policy->max - * needs to be increased until one freuqency is supported. - * policy->min may not be decreased, though. This way we guarantee a - * specific processing capacity. - */ - tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2); - if (tmp_freq < policy->min) - tmp_freq += stock_freq / max_duration; - policy->min = tmp_freq; - if (policy->min > policy->max) - policy->max = tmp_freq; - tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2); - if (tmp_freq > policy->max) - tmp_freq -= stock_freq / max_duration; - policy->max = tmp_freq; - if (policy->max < policy->min) - policy->max = policy->min; - cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); - - return 0; -} - -/* - * cpufreq_gx_target: - * - */ -static int cpufreq_gx_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - u8 tmp1, tmp2; - unsigned int tmp_freq; - - if (!stock_freq || !policy) - return -EINVAL; - - policy->cpu = 0; - - tmp_freq = gx_validate_speed(target_freq, &tmp1, &tmp2); - while (tmp_freq < policy->min) { - tmp_freq += stock_freq / max_duration; - tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2); - } - while (tmp_freq > policy->max) { - tmp_freq -= stock_freq / max_duration; - tmp_freq = gx_validate_speed(tmp_freq, &tmp1, &tmp2); - } - - gx_set_cpuspeed(tmp_freq); - - return 0; -} - -static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int maxfreq, curfreq; - - if (!policy || policy->cpu != 0) - return -ENODEV; - - /* determine maximum frequency */ - if (pci_busclk) { - maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; - } else if (cpu_khz) { - maxfreq = cpu_khz; - } else { - maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; - } - stock_freq = maxfreq; - curfreq = gx_get_cpuspeed(0); - - dprintk("cpu max frequency is %d.\n", maxfreq); - dprintk("cpu current frequency is %dkHz.\n",curfreq); - - /* setup basic struct for cpufreq API */ - policy->cpu = 0; - - if (max_duration < POLICY_MIN_DIV) - policy->min = maxfreq / max_duration; - else - policy->min = maxfreq / POLICY_MIN_DIV; - policy->max = maxfreq; - policy->cur = curfreq; - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->cpuinfo.min_freq = maxfreq / max_duration; - policy->cpuinfo.max_freq = maxfreq; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - - return 0; -} - -/* - * cpufreq_gx_init: - * MediaGX/Geode GX initialize cpufreq driver - */ -static struct cpufreq_driver gx_suspmod_driver = { - .get = gx_get_cpuspeed, - .verify = cpufreq_gx_verify, - .target = cpufreq_gx_target, - .init = cpufreq_gx_cpu_init, - .name = "gx-suspmod", - .owner = THIS_MODULE, -}; - -static int __init cpufreq_gx_init(void) -{ - int ret; - struct gxfreq_params *params; - struct pci_dev *gx_pci; - - /* Test if we have the right hardware */ - if ((gx_pci = gx_detect_chipset()) == NULL) - return -ENODEV; - - /* check whether module parameters are sane */ - if (max_duration > 0xff) - max_duration = 0xff; - - dprintk("geode suspend modulation available.\n"); - - params = kzalloc(sizeof(struct gxfreq_params), GFP_KERNEL); - if (params == NULL) - return -ENOMEM; - - params->cs55x0 = gx_pci; - gx_params = params; - - /* keep cs55x0 configurations */ - pci_read_config_byte(params->cs55x0, PCI_SUSCFG, &(params->pci_suscfg)); - pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1)); - pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2)); - pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration)); - pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration)); - - if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { - kfree(params); - return ret; /* register error! */ - } - - return 0; -} - -static void __exit cpufreq_gx_exit(void) -{ - cpufreq_unregister_driver(&gx_suspmod_driver); - pci_dev_put(gx_params->cs55x0); - kfree(gx_params); -} - -MODULE_AUTHOR ("Hiroshi Miura <miura@da-cha.org>"); -MODULE_DESCRIPTION ("Cpufreq driver for Cyrix MediaGX and NatSemi Geode"); -MODULE_LICENSE ("GPL"); - -module_init(cpufreq_gx_init); -module_exit(cpufreq_gx_exit); - diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c deleted file mode 100644 index f0cce3c2dc3a..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.c +++ /dev/null @@ -1,1024 +0,0 @@ -/* - * (C) 2001-2004 Dave Jones. <davej@codemonkey.org.uk> - * (C) 2002 Padraig Brady. <padraig@antefacto.com> - * - * Licensed under the terms of the GNU GPL License version 2. - * Based upon datasheets & sample CPUs kindly provided by VIA. - * - * VIA have currently 3 different versions of Longhaul. - * Version 1 (Longhaul) uses the BCR2 MSR at 0x1147. - * It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0. - * Version 2 of longhaul is backward compatible with v1, but adds - * LONGHAUL MSR for purpose of both frequency and voltage scaling. - * Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C). - * Version 3 of longhaul got renamed to Powersaver and redesigned - * to use only the POWERSAVER MSR at 0x110a. - * It is present in Ezra-T (C5M), Nehemiah (C5X) and above. - * It's pretty much the same feature wise to longhaul v2, though - * there is provision for scaling FSB too, but this doesn't work - * too well in practice so we don't even try to use this. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/delay.h> - -#include <asm/msr.h> -#include <asm/timex.h> -#include <asm/io.h> -#include <asm/acpi.h> -#include <linux/acpi.h> -#include <acpi/processor.h> - -#include "longhaul.h" - -#define PFX "longhaul: " - -#define TYPE_LONGHAUL_V1 1 -#define TYPE_LONGHAUL_V2 2 -#define TYPE_POWERSAVER 3 - -#define CPU_SAMUEL 1 -#define CPU_SAMUEL2 2 -#define CPU_EZRA 3 -#define CPU_EZRA_T 4 -#define CPU_NEHEMIAH 5 -#define CPU_NEHEMIAH_C 6 - -/* Flags */ -#define USE_ACPI_C3 (1 << 1) -#define USE_NORTHBRIDGE (1 << 2) - -static int cpu_model; -static unsigned int numscales=16; -static unsigned int fsb; - -static const struct mV_pos *vrm_mV_table; -static const unsigned char *mV_vrm_table; - -static unsigned int highest_speed, lowest_speed; /* kHz */ -static unsigned int minmult, maxmult; -static int can_scale_voltage; -static struct acpi_processor *pr = NULL; -static struct acpi_processor_cx *cx = NULL; -static u32 acpi_regs_addr; -static u8 longhaul_flags; -static unsigned int longhaul_index; - -/* Module parameters */ -static int scale_voltage; -static int disable_acpi_c3; -static int revid_errata; - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg) - - -/* Clock ratios multiplied by 10 */ -static int clock_ratio[32]; -static int eblcr_table[32]; -static int longhaul_version; -static struct cpufreq_frequency_table *longhaul_table; - -#ifdef CONFIG_CPU_FREQ_DEBUG -static char speedbuffer[8]; - -static char *print_speed(int speed) -{ - if (speed < 1000) { - snprintf(speedbuffer, sizeof(speedbuffer),"%dMHz", speed); - return speedbuffer; - } - - if (speed%1000 == 0) - snprintf(speedbuffer, sizeof(speedbuffer), - "%dGHz", speed/1000); - else - snprintf(speedbuffer, sizeof(speedbuffer), - "%d.%dGHz", speed/1000, (speed%1000)/100); - - return speedbuffer; -} -#endif - - -static unsigned int calc_speed(int mult) -{ - int khz; - khz = (mult/10)*fsb; - if (mult%10) - khz += fsb/2; - khz *= 1000; - return khz; -} - - -static int longhaul_get_cpu_mult(void) -{ - unsigned long invalue=0,lo, hi; - - rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi); - invalue = (lo & (1<<22|1<<23|1<<24|1<<25)) >>22; - if (longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) { - if (lo & (1<<27)) - invalue+=16; - } - return eblcr_table[invalue]; -} - -/* For processor with BCR2 MSR */ - -static void do_longhaul1(unsigned int clock_ratio_index) -{ - union msr_bcr2 bcr2; - - rdmsrl(MSR_VIA_BCR2, bcr2.val); - /* Enable software clock multiplier */ - bcr2.bits.ESOFTBF = 1; - bcr2.bits.CLOCKMUL = clock_ratio_index & 0xff; - - /* Sync to timer tick */ - safe_halt(); - /* Change frequency on next halt or sleep */ - wrmsrl(MSR_VIA_BCR2, bcr2.val); - /* Invoke transition */ - ACPI_FLUSH_CPU_CACHE(); - halt(); - - /* Disable software clock multiplier */ - local_irq_disable(); - rdmsrl(MSR_VIA_BCR2, bcr2.val); - bcr2.bits.ESOFTBF = 0; - wrmsrl(MSR_VIA_BCR2, bcr2.val); -} - -/* For processor with Longhaul MSR */ - -static void do_powersaver(int cx_address, unsigned int clock_ratio_index, - unsigned int dir) -{ - union msr_longhaul longhaul; - u32 t; - - rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); - /* Setup new frequency */ - if (!revid_errata) - longhaul.bits.RevisionKey = longhaul.bits.RevisionID; - else - longhaul.bits.RevisionKey = 0; - longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf; - longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; - /* Setup new voltage */ - if (can_scale_voltage) - longhaul.bits.SoftVID = (clock_ratio_index >> 8) & 0x1f; - /* Sync to timer tick */ - safe_halt(); - /* Raise voltage if necessary */ - if (can_scale_voltage && dir) { - longhaul.bits.EnableSoftVID = 1; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - /* Change voltage */ - if (!cx_address) { - ACPI_FLUSH_CPU_CACHE(); - halt(); - } else { - ACPI_FLUSH_CPU_CACHE(); - /* Invoke C3 */ - inb(cx_address); - /* Dummy op - must do something useless after P_LVL3 - * read */ - t = inl(acpi_gbl_FADT.xpm_timer_block.address); - } - longhaul.bits.EnableSoftVID = 0; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - } - - /* Change frequency on next halt or sleep */ - longhaul.bits.EnableSoftBusRatio = 1; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - if (!cx_address) { - ACPI_FLUSH_CPU_CACHE(); - halt(); - } else { - ACPI_FLUSH_CPU_CACHE(); - /* Invoke C3 */ - inb(cx_address); - /* Dummy op - must do something useless after P_LVL3 read */ - t = inl(acpi_gbl_FADT.xpm_timer_block.address); - } - /* Disable bus ratio bit */ - longhaul.bits.EnableSoftBusRatio = 0; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - - /* Reduce voltage if necessary */ - if (can_scale_voltage && !dir) { - longhaul.bits.EnableSoftVID = 1; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - /* Change voltage */ - if (!cx_address) { - ACPI_FLUSH_CPU_CACHE(); - halt(); - } else { - ACPI_FLUSH_CPU_CACHE(); - /* Invoke C3 */ - inb(cx_address); - /* Dummy op - must do something useless after P_LVL3 - * read */ - t = inl(acpi_gbl_FADT.xpm_timer_block.address); - } - longhaul.bits.EnableSoftVID = 0; - wrmsrl(MSR_VIA_LONGHAUL, longhaul.val); - } -} - -/** - * longhaul_set_cpu_frequency() - * @clock_ratio_index : bitpattern of the new multiplier. - * - * Sets a new clock ratio. - */ - -static void longhaul_setstate(unsigned int table_index) -{ - unsigned int clock_ratio_index; - int speed, mult; - struct cpufreq_freqs freqs; - unsigned long flags; - unsigned int pic1_mask, pic2_mask; - u16 bm_status = 0; - u32 bm_timeout = 1000; - unsigned int dir = 0; - - clock_ratio_index = longhaul_table[table_index].index; - /* Safety precautions */ - mult = clock_ratio[clock_ratio_index & 0x1f]; - if (mult == -1) - return; - speed = calc_speed(mult); - if ((speed > highest_speed) || (speed < lowest_speed)) - return; - /* Voltage transition before frequency transition? */ - if (can_scale_voltage && longhaul_index < table_index) - dir = 1; - - freqs.old = calc_speed(longhaul_get_cpu_mult()); - freqs.new = speed; - freqs.cpu = 0; /* longhaul.c is UP only driver */ - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", - fsb, mult/10, mult%10, print_speed(speed/1000)); -retry_loop: - preempt_disable(); - local_irq_save(flags); - - pic2_mask = inb(0xA1); - pic1_mask = inb(0x21); /* works on C3. save mask. */ - outb(0xFF,0xA1); /* Overkill */ - outb(0xFE,0x21); /* TMR0 only */ - - /* Wait while PCI bus is busy. */ - if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE - || ((pr != NULL) && pr->flags.bm_control))) { - bm_status = inw(acpi_regs_addr); - bm_status &= 1 << 4; - while (bm_status && bm_timeout) { - outw(1 << 4, acpi_regs_addr); - bm_timeout--; - bm_status = inw(acpi_regs_addr); - bm_status &= 1 << 4; - } - } - - if (longhaul_flags & USE_NORTHBRIDGE) { - /* Disable AGP and PCI arbiters */ - outb(3, 0x22); - } else if ((pr != NULL) && pr->flags.bm_control) { - /* Disable bus master arbitration */ - acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1); - } - switch (longhaul_version) { - - /* - * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B]) - * Software controlled multipliers only. - */ - case TYPE_LONGHAUL_V1: - do_longhaul1(clock_ratio_index); - break; - - /* - * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C] - * - * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N]) - * Nehemiah can do FSB scaling too, but this has never been proven - * to work in practice. - */ - case TYPE_LONGHAUL_V2: - case TYPE_POWERSAVER: - if (longhaul_flags & USE_ACPI_C3) { - /* Don't allow wakeup */ - acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0); - do_powersaver(cx->address, clock_ratio_index, dir); - } else { - do_powersaver(0, clock_ratio_index, dir); - } - break; - } - - if (longhaul_flags & USE_NORTHBRIDGE) { - /* Enable arbiters */ - outb(0, 0x22); - } else if ((pr != NULL) && pr->flags.bm_control) { - /* Enable bus master arbitration */ - acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0); - } - outb(pic2_mask,0xA1); /* restore mask */ - outb(pic1_mask,0x21); - - local_irq_restore(flags); - preempt_enable(); - - freqs.new = calc_speed(longhaul_get_cpu_mult()); - /* Check if requested frequency is set. */ - if (unlikely(freqs.new != speed)) { - printk(KERN_INFO PFX "Failed to set requested frequency!\n"); - /* Revision ID = 1 but processor is expecting revision key - * equal to 0. Jumpers at the bottom of processor will change - * multiplier and FSB, but will not change bits in Longhaul - * MSR nor enable voltage scaling. */ - if (!revid_errata) { - printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" " - "option.\n"); - revid_errata = 1; - msleep(200); - goto retry_loop; - } - /* Why ACPI C3 sometimes doesn't work is a mystery for me. - * But it does happen. Processor is entering ACPI C3 state, - * but it doesn't change frequency. I tried poking various - * bits in northbridge registers, but without success. */ - if (longhaul_flags & USE_ACPI_C3) { - printk(KERN_INFO PFX "Disabling ACPI C3 support.\n"); - longhaul_flags &= ~USE_ACPI_C3; - if (revid_errata) { - printk(KERN_INFO PFX "Disabling \"Ignore " - "Revision ID\" option.\n"); - revid_errata = 0; - } - msleep(200); - goto retry_loop; - } - /* This shouldn't happen. Longhaul ver. 2 was reported not - * working on processors without voltage scaling, but with - * RevID = 1. RevID errata will make things right. Just - * to be 100% sure. */ - if (longhaul_version == TYPE_LONGHAUL_V2) { - printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n"); - longhaul_version = TYPE_LONGHAUL_V1; - msleep(200); - goto retry_loop; - } - } - /* Report true CPU frequency */ - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - if (!bm_timeout) - printk(KERN_INFO PFX "Warning: Timeout while waiting for idle PCI bus.\n"); -} - -/* - * Centaur decided to make life a little more tricky. - * Only longhaul v1 is allowed to read EBLCR BSEL[0:1]. - * Samuel2 and above have to try and guess what the FSB is. - * We do this by assuming we booted at maximum multiplier, and interpolate - * between that value multiplied by possible FSBs and cpu_mhz which - * was calculated at boot time. Really ugly, but no other way to do this. - */ - -#define ROUNDING 0xf - -static int guess_fsb(int mult) -{ - int speed = cpu_khz / 1000; - int i; - int speeds[] = { 666, 1000, 1333, 2000 }; - int f_max, f_min; - - for (i = 0; i < 4; i++) { - f_max = ((speeds[i] * mult) + 50) / 100; - f_max += (ROUNDING / 2); - f_min = f_max - ROUNDING; - if ((speed <= f_max) && (speed >= f_min)) - return speeds[i] / 10; - } - return 0; -} - - -static int __init longhaul_get_ranges(void) -{ - unsigned int i, j, k = 0; - unsigned int ratio; - int mult; - - /* Get current frequency */ - mult = longhaul_get_cpu_mult(); - if (mult == -1) { - printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n"); - return -EINVAL; - } - fsb = guess_fsb(mult); - if (fsb == 0) { - printk(KERN_INFO PFX "Invalid (reserved) FSB!\n"); - return -EINVAL; - } - /* Get max multiplier - as we always did. - * Longhaul MSR is usefull only when voltage scaling is enabled. - * C3 is booting at max anyway. */ - maxmult = mult; - /* Get min multiplier */ - switch (cpu_model) { - case CPU_NEHEMIAH: - minmult = 50; - break; - case CPU_NEHEMIAH_C: - minmult = 40; - break; - default: - minmult = 30; - break; - } - - dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n", - minmult/10, minmult%10, maxmult/10, maxmult%10); - - highest_speed = calc_speed(maxmult); - lowest_speed = calc_speed(minmult); - dprintk ("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, - print_speed(lowest_speed/1000), - print_speed(highest_speed/1000)); - - if (lowest_speed == highest_speed) { - printk (KERN_INFO PFX "highestspeed == lowest, aborting.\n"); - return -EINVAL; - } - if (lowest_speed > highest_speed) { - printk (KERN_INFO PFX "nonsense! lowest (%d > %d) !\n", - lowest_speed, highest_speed); - return -EINVAL; - } - - longhaul_table = kmalloc((numscales + 1) * sizeof(struct cpufreq_frequency_table), GFP_KERNEL); - if(!longhaul_table) - return -ENOMEM; - - for (j = 0; j < numscales; j++) { - ratio = clock_ratio[j]; - if (ratio == -1) - continue; - if (ratio > maxmult || ratio < minmult) - continue; - longhaul_table[k].frequency = calc_speed(ratio); - longhaul_table[k].index = j; - k++; - } - if (k <= 1) { - kfree(longhaul_table); - return -ENODEV; - } - /* Sort */ - for (j = 0; j < k - 1; j++) { - unsigned int min_f, min_i; - min_f = longhaul_table[j].frequency; - min_i = j; - for (i = j + 1; i < k; i++) { - if (longhaul_table[i].frequency < min_f) { - min_f = longhaul_table[i].frequency; - min_i = i; - } - } - if (min_i != j) { - unsigned int temp; - temp = longhaul_table[j].frequency; - longhaul_table[j].frequency = longhaul_table[min_i].frequency; - longhaul_table[min_i].frequency = temp; - temp = longhaul_table[j].index; - longhaul_table[j].index = longhaul_table[min_i].index; - longhaul_table[min_i].index = temp; - } - } - - longhaul_table[k].frequency = CPUFREQ_TABLE_END; - - /* Find index we are running on */ - for (j = 0; j < k; j++) { - if (clock_ratio[longhaul_table[j].index & 0x1f] == mult) { - longhaul_index = j; - break; - } - } - return 0; -} - - -static void __init longhaul_setup_voltagescaling(void) -{ - union msr_longhaul longhaul; - struct mV_pos minvid, maxvid, vid; - unsigned int j, speed, pos, kHz_step, numvscales; - int min_vid_speed; - - rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); - if (!(longhaul.bits.RevisionID & 1)) { - printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n"); - return; - } - - if (!longhaul.bits.VRMRev) { - printk(KERN_INFO PFX "VRM 8.5\n"); - vrm_mV_table = &vrm85_mV[0]; - mV_vrm_table = &mV_vrm85[0]; - } else { - printk(KERN_INFO PFX "Mobile VRM\n"); - if (cpu_model < CPU_NEHEMIAH) - return; - vrm_mV_table = &mobilevrm_mV[0]; - mV_vrm_table = &mV_mobilevrm[0]; - } - - minvid = vrm_mV_table[longhaul.bits.MinimumVID]; - maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; - - if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { - printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " - "Voltage scaling disabled.\n", - minvid.mV/1000, minvid.mV%1000, maxvid.mV/1000, maxvid.mV%1000); - return; - } - - if (minvid.mV == maxvid.mV) { - printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are " - "both %d.%03d. Voltage scaling disabled\n", - maxvid.mV/1000, maxvid.mV%1000); - return; - } - - /* How many voltage steps */ - numvscales = maxvid.pos - minvid.pos + 1; - printk(KERN_INFO PFX - "Max VID=%d.%03d " - "Min VID=%d.%03d, " - "%d possible voltage scales\n", - maxvid.mV/1000, maxvid.mV%1000, - minvid.mV/1000, minvid.mV%1000, - numvscales); - - /* Calculate max frequency at min voltage */ - j = longhaul.bits.MinMHzBR; - if (longhaul.bits.MinMHzBR4) - j += 16; - min_vid_speed = eblcr_table[j]; - if (min_vid_speed == -1) - return; - switch (longhaul.bits.MinMHzFSB) { - case 0: - min_vid_speed *= 13333; - break; - case 1: - min_vid_speed *= 10000; - break; - case 3: - min_vid_speed *= 6666; - break; - default: - return; - break; - } - if (min_vid_speed >= highest_speed) - return; - /* Calculate kHz for one voltage step */ - kHz_step = (highest_speed - min_vid_speed) / numvscales; - - j = 0; - while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) { - speed = longhaul_table[j].frequency; - if (speed > min_vid_speed) - pos = (speed - min_vid_speed) / kHz_step + minvid.pos; - else - pos = minvid.pos; - longhaul_table[j].index |= mV_vrm_table[pos] << 8; - vid = vrm_mV_table[mV_vrm_table[pos]]; - printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", speed, j, vid.mV); - j++; - } - - can_scale_voltage = 1; - printk(KERN_INFO PFX "Voltage scaling enabled.\n"); -} - - -static int longhaul_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, longhaul_table); -} - - -static int longhaul_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned int table_index = 0; - unsigned int i; - unsigned int dir = 0; - u8 vid, current_vid; - - if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index)) - return -EINVAL; - - /* Don't set same frequency again */ - if (longhaul_index == table_index) - return 0; - - if (!can_scale_voltage) - longhaul_setstate(table_index); - else { - /* On test system voltage transitions exceeding single - * step up or down were turning motherboard off. Both - * "ondemand" and "userspace" are unsafe. C7 is doing - * this in hardware, C3 is old and we need to do this - * in software. */ - i = longhaul_index; - current_vid = (longhaul_table[longhaul_index].index >> 8) & 0x1f; - if (table_index > longhaul_index) - dir = 1; - while (i != table_index) { - vid = (longhaul_table[i].index >> 8) & 0x1f; - if (vid != current_vid) { - longhaul_setstate(i); - current_vid = vid; - msleep(200); - } - if (dir) - i++; - else - i--; - } - longhaul_setstate(table_index); - } - longhaul_index = table_index; - return 0; -} - - -static unsigned int longhaul_get(unsigned int cpu) -{ - if (cpu) - return 0; - return calc_speed(longhaul_get_cpu_mult()); -} - -static acpi_status longhaul_walk_callback(acpi_handle obj_handle, - u32 nesting_level, - void *context, void **return_value) -{ - struct acpi_device *d; - - if ( acpi_bus_get_device(obj_handle, &d) ) { - return 0; - } - *return_value = (void *)acpi_driver_data(d); - return 1; -} - -/* VIA don't support PM2 reg, but have something similar */ -static int enable_arbiter_disable(void) -{ - struct pci_dev *dev; - int status = 1; - int reg; - u8 pci_cmd; - - /* Find PLE133 host bridge */ - reg = 0x78; - dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, - NULL); - /* Find CLE266 host bridge */ - if (dev == NULL) { - reg = 0x76; - dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_862X_0, NULL); - /* Find CN400 V-Link host bridge */ - if (dev == NULL) - dev = pci_get_device(PCI_VENDOR_ID_VIA, 0x7259, NULL); - } - if (dev != NULL) { - /* Enable access to port 0x22 */ - pci_read_config_byte(dev, reg, &pci_cmd); - if (!(pci_cmd & 1<<7)) { - pci_cmd |= 1<<7; - pci_write_config_byte(dev, reg, pci_cmd); - pci_read_config_byte(dev, reg, &pci_cmd); - if (!(pci_cmd & 1<<7)) { - printk(KERN_ERR PFX - "Can't enable access to port 0x22.\n"); - status = 0; - } - } - pci_dev_put(dev); - return status; - } - return 0; -} - -static int longhaul_setup_southbridge(void) -{ - struct pci_dev *dev; - u8 pci_cmd; - - /* Find VT8235 southbridge */ - dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); - if (dev == NULL) - /* Find VT8237 southbridge */ - dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_8237, NULL); - if (dev != NULL) { - /* Set transition time to max */ - pci_read_config_byte(dev, 0xec, &pci_cmd); - pci_cmd &= ~(1 << 2); - pci_write_config_byte(dev, 0xec, pci_cmd); - pci_read_config_byte(dev, 0xe4, &pci_cmd); - pci_cmd &= ~(1 << 7); - pci_write_config_byte(dev, 0xe4, pci_cmd); - pci_read_config_byte(dev, 0xe5, &pci_cmd); - pci_cmd |= 1 << 7; - pci_write_config_byte(dev, 0xe5, pci_cmd); - /* Get address of ACPI registers block*/ - pci_read_config_byte(dev, 0x81, &pci_cmd); - if (pci_cmd & 1 << 7) { - pci_read_config_dword(dev, 0x88, &acpi_regs_addr); - acpi_regs_addr &= 0xff00; - printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", acpi_regs_addr); - } - - pci_dev_put(dev); - return 1; - } - return 0; -} - -static int __init longhaul_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *c = cpu_data; - char *cpuname=NULL; - int ret; - u32 lo, hi; - - /* Check what we have on this motherboard */ - switch (c->x86_model) { - case 6: - cpu_model = CPU_SAMUEL; - cpuname = "C3 'Samuel' [C5A]"; - longhaul_version = TYPE_LONGHAUL_V1; - memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio)); - memcpy (eblcr_table, samuel1_eblcr, sizeof(samuel1_eblcr)); - break; - - case 7: - switch (c->x86_mask) { - case 0: - longhaul_version = TYPE_LONGHAUL_V1; - cpu_model = CPU_SAMUEL2; - cpuname = "C3 'Samuel 2' [C5B]"; - /* Note, this is not a typo, early Samuel2's had - * Samuel1 ratios. */ - memcpy(clock_ratio, samuel1_clock_ratio, - sizeof(samuel1_clock_ratio)); - memcpy(eblcr_table, samuel2_eblcr, - sizeof(samuel2_eblcr)); - break; - case 1 ... 15: - longhaul_version = TYPE_LONGHAUL_V1; - if (c->x86_mask < 8) { - cpu_model = CPU_SAMUEL2; - cpuname = "C3 'Samuel 2' [C5B]"; - } else { - cpu_model = CPU_EZRA; - cpuname = "C3 'Ezra' [C5C]"; - } - memcpy(clock_ratio, ezra_clock_ratio, - sizeof(ezra_clock_ratio)); - memcpy(eblcr_table, ezra_eblcr, - sizeof(ezra_eblcr)); - break; - } - break; - - case 8: - cpu_model = CPU_EZRA_T; - cpuname = "C3 'Ezra-T' [C5M]"; - longhaul_version = TYPE_POWERSAVER; - numscales=32; - memcpy (clock_ratio, ezrat_clock_ratio, sizeof(ezrat_clock_ratio)); - memcpy (eblcr_table, ezrat_eblcr, sizeof(ezrat_eblcr)); - break; - - case 9: - longhaul_version = TYPE_POWERSAVER; - numscales = 32; - memcpy(clock_ratio, - nehemiah_clock_ratio, - sizeof(nehemiah_clock_ratio)); - memcpy(eblcr_table, nehemiah_eblcr, sizeof(nehemiah_eblcr)); - switch (c->x86_mask) { - case 0 ... 1: - cpu_model = CPU_NEHEMIAH; - cpuname = "C3 'Nehemiah A' [C5XLOE]"; - break; - case 2 ... 4: - cpu_model = CPU_NEHEMIAH; - cpuname = "C3 'Nehemiah B' [C5XLOH]"; - break; - case 5 ... 15: - cpu_model = CPU_NEHEMIAH_C; - cpuname = "C3 'Nehemiah C' [C5P]"; - break; - } - break; - - default: - cpuname = "Unknown"; - break; - } - /* Check Longhaul ver. 2 */ - if (longhaul_version == TYPE_LONGHAUL_V2) { - rdmsr(MSR_VIA_LONGHAUL, lo, hi); - if (lo == 0 && hi == 0) - /* Looks like MSR isn't present */ - longhaul_version = TYPE_LONGHAUL_V1; - } - - printk (KERN_INFO PFX "VIA %s CPU detected. ", cpuname); - switch (longhaul_version) { - case TYPE_LONGHAUL_V1: - case TYPE_LONGHAUL_V2: - printk ("Longhaul v%d supported.\n", longhaul_version); - break; - case TYPE_POWERSAVER: - printk ("Powersaver supported.\n"); - break; - }; - - /* Doesn't hurt */ - longhaul_setup_southbridge(); - - /* Find ACPI data for processor */ - acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, &longhaul_walk_callback, - NULL, (void *)&pr); - - /* Check ACPI support for C3 state */ - if (pr != NULL && longhaul_version == TYPE_POWERSAVER) { - cx = &pr->power.states[ACPI_STATE_C3]; - if (cx->address > 0 && cx->latency <= 1000) - longhaul_flags |= USE_ACPI_C3; - } - /* Disable if it isn't working */ - if (disable_acpi_c3) - longhaul_flags &= ~USE_ACPI_C3; - /* Check if northbridge is friendly */ - if (enable_arbiter_disable()) - longhaul_flags |= USE_NORTHBRIDGE; - - /* Check ACPI support for bus master arbiter disable */ - if (!(longhaul_flags & USE_ACPI_C3 - || longhaul_flags & USE_NORTHBRIDGE) - && ((pr == NULL) || !(pr->flags.bm_control))) { - printk(KERN_ERR PFX - "No ACPI support. Unsupported northbridge.\n"); - return -ENODEV; - } - - if (longhaul_flags & USE_NORTHBRIDGE) - printk(KERN_INFO PFX "Using northbridge support.\n"); - if (longhaul_flags & USE_ACPI_C3) - printk(KERN_INFO PFX "Using ACPI support.\n"); - - ret = longhaul_get_ranges(); - if (ret != 0) - return ret; - - if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0)) - longhaul_setup_voltagescaling(); - - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->cpuinfo.transition_latency = 200000; /* nsec */ - policy->cur = calc_speed(longhaul_get_cpu_mult()); - - ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table); - if (ret) - return ret; - - cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu); - - return 0; -} - -static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct freq_attr* longhaul_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver longhaul_driver = { - .verify = longhaul_verify, - .target = longhaul_target, - .get = longhaul_get, - .init = longhaul_cpu_init, - .exit = __devexit_p(longhaul_cpu_exit), - .name = "longhaul", - .owner = THIS_MODULE, - .attr = longhaul_attr, -}; - - -static int __init longhaul_init(void) -{ - struct cpuinfo_x86 *c = cpu_data; - - if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6) - return -ENODEV; - -#ifdef CONFIG_SMP - if (num_online_cpus() > 1) { - printk(KERN_ERR PFX "More than 1 CPU detected, longhaul disabled.\n"); - return -ENODEV; - } -#endif -#ifdef CONFIG_X86_IO_APIC - if (cpu_has_apic) { - printk(KERN_ERR PFX "APIC detected. Longhaul is currently broken in this configuration.\n"); - return -ENODEV; - } -#endif - switch (c->x86_model) { - case 6 ... 9: - return cpufreq_register_driver(&longhaul_driver); - case 10: - printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n"); - default: - ;; - } - - return -ENODEV; -} - - -static void __exit longhaul_exit(void) -{ - int i; - - for (i=0; i < numscales; i++) { - if (clock_ratio[i] == maxmult) { - longhaul_setstate(i); - break; - } - } - - cpufreq_unregister_driver(&longhaul_driver); - kfree(longhaul_table); -} - -/* Even if BIOS is exporting ACPI C3 state, and it is used - * with success when CPU is idle, this state doesn't - * trigger frequency transition in some cases. */ -module_param (disable_acpi_c3, int, 0644); -MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support"); -/* Change CPU voltage with frequency. Very usefull to save - * power, but most VIA C3 processors aren't supporting it. */ -module_param (scale_voltage, int, 0644); -MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); -/* Force revision key to 0 for processors which doesn't - * support voltage scaling, but are introducing itself as - * such. */ -module_param(revid_errata, int, 0644); -MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID"); - -MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>"); -MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors."); -MODULE_LICENSE ("GPL"); - -late_initcall(longhaul_init); -module_exit(longhaul_exit); diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/i386/kernel/cpu/cpufreq/longhaul.h deleted file mode 100644 index 4fcc320997df..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/longhaul.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - * longhaul.h - * (C) 2003 Dave Jones. - * - * Licensed under the terms of the GNU GPL License version 2. - * - * VIA-specific information - */ - -union msr_bcr2 { - struct { - unsigned Reseved:19, // 18:0 - ESOFTBF:1, // 19 - Reserved2:3, // 22:20 - CLOCKMUL:4, // 26:23 - Reserved3:5; // 31:27 - } bits; - unsigned long val; -}; - -union msr_longhaul { - struct { - unsigned RevisionID:4, // 3:0 - RevisionKey:4, // 7:4 - EnableSoftBusRatio:1, // 8 - EnableSoftVID:1, // 9 - EnableSoftBSEL:1, // 10 - Reserved:3, // 11:13 - SoftBusRatio4:1, // 14 - VRMRev:1, // 15 - SoftBusRatio:4, // 19:16 - SoftVID:5, // 24:20 - Reserved2:3, // 27:25 - SoftBSEL:2, // 29:28 - Reserved3:2, // 31:30 - MaxMHzBR:4, // 35:32 - MaximumVID:5, // 40:36 - MaxMHzFSB:2, // 42:41 - MaxMHzBR4:1, // 43 - Reserved4:4, // 47:44 - MinMHzBR:4, // 51:48 - MinimumVID:5, // 56:52 - MinMHzFSB:2, // 58:57 - MinMHzBR4:1, // 59 - Reserved5:4; // 63:60 - } bits; - unsigned long long val; -}; - -/* - * Clock ratio tables. Div/Mod by 10 to get ratio. - * The eblcr ones specify the ratio read from the CPU. - * The clock_ratio ones specify what to write to the CPU. - */ - -/* - * VIA C3 Samuel 1 & Samuel 2 (stepping 0) - */ -static const int __initdata samuel1_clock_ratio[16] = { - -1, /* 0000 -> RESERVED */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - -1, /* 0011 -> RESERVED */ - -1, /* 0100 -> RESERVED */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - -1, /* 1110 -> RESERVED */ - -1, /* 1111 -> RESERVED */ -}; - -static const int __initdata samuel1_eblcr[16] = { - 50, /* 0000 -> RESERVED */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - -1, /* 0011 -> RESERVED */ - 55, /* 0100 -> 5.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - -1, /* 0111 -> RESERVED */ - -1, /* 1000 -> RESERVED */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - -1, /* 1100 -> RESERVED */ - 75, /* 1101 -> 7.5x */ - -1, /* 1110 -> RESERVED */ - 65, /* 1111 -> 6.5x */ -}; - -/* - * VIA C3 Samuel2 Stepping 1->15 - */ -static const int __initdata samuel2_eblcr[16] = { - 50, /* 0000 -> 5.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 110, /* 0111 -> 11.0x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 130, /* 1110 -> 13.0x */ - 65, /* 1111 -> 6.5x */ -}; - -/* - * VIA C3 Ezra - */ -static const int __initdata ezra_clock_ratio[16] = { - 100, /* 0000 -> 10.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ -}; - -static const int __initdata ezra_eblcr[16] = { - 50, /* 0000 -> 5.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ -}; - -/* - * VIA C3 (Ezra-T) [C5M]. - */ -static const int __initdata ezrat_clock_ratio[32] = { - 100, /* 0000 -> 10.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ - - -1, /* 0000 -> RESERVED (10.0x) */ - 110, /* 0001 -> 11.0x */ - -1, /* 0010 -> 12.0x */ - -1, /* 0011 -> RESERVED (9.0x)*/ - 105, /* 0100 -> 10.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 135, /* 0111 -> 13.5x */ - 140, /* 1000 -> 14.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 130, /* 1011 -> 13.0x */ - 145, /* 1100 -> 14.5x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - -1, /* 1111 -> RESERVED (12.0x) */ -}; - -static const int __initdata ezrat_eblcr[32] = { - 50, /* 0000 -> 5.0x */ - 30, /* 0001 -> 3.0x */ - 40, /* 0010 -> 4.0x */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - 35, /* 0101 -> 3.5x */ - 45, /* 0110 -> 4.5x */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ - - -1, /* 0000 -> RESERVED (9.0x) */ - 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ - -1, /* 0011 -> RESERVED (10.0x)*/ - 135, /* 0100 -> 13.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 105, /* 0111 -> 10.5x */ - 130, /* 1000 -> 13.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 140, /* 1011 -> 14.0x */ - -1, /* 1100 -> RESERVED (12.0x) */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 145, /* 1111 -> 14.5x */ -}; - -/* - * VIA C3 Nehemiah */ - -static const int __initdata nehemiah_clock_ratio[32] = { - 100, /* 0000 -> 10.0x */ - -1, /* 0001 -> 16.0x */ - 40, /* 0010 -> 4.0x */ - 90, /* 0011 -> 9.0x */ - 95, /* 0100 -> 9.5x */ - -1, /* 0101 -> RESERVED */ - 45, /* 0110 -> 4.5x */ - 55, /* 0111 -> 5.5x */ - 60, /* 1000 -> 6.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 50, /* 1011 -> 5.0x */ - 65, /* 1100 -> 6.5x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 120, /* 1111 -> 12.0x */ - -1, /* 0000 -> 10.0x */ - 110, /* 0001 -> 11.0x */ - -1, /* 0010 -> 12.0x */ - -1, /* 0011 -> 9.0x */ - 105, /* 0100 -> 10.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 135, /* 0111 -> 13.5x */ - 140, /* 1000 -> 14.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 130, /* 1011 -> 13.0x */ - 145, /* 1100 -> 14.5x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - -1, /* 1111 -> 12.0x */ -}; - -static const int __initdata nehemiah_eblcr[32] = { - 50, /* 0000 -> 5.0x */ - 160, /* 0001 -> 16.0x */ - 40, /* 0010 -> 4.0x */ - 100, /* 0011 -> 10.0x */ - 55, /* 0100 -> 5.5x */ - -1, /* 0101 -> RESERVED */ - 45, /* 0110 -> 4.5x */ - 95, /* 0111 -> 9.5x */ - 90, /* 1000 -> 9.0x */ - 70, /* 1001 -> 7.0x */ - 80, /* 1010 -> 8.0x */ - 60, /* 1011 -> 6.0x */ - 120, /* 1100 -> 12.0x */ - 75, /* 1101 -> 7.5x */ - 85, /* 1110 -> 8.5x */ - 65, /* 1111 -> 6.5x */ - 90, /* 0000 -> 9.0x */ - 110, /* 0001 -> 11.0x */ - 120, /* 0010 -> 12.0x */ - 100, /* 0011 -> 10.0x */ - 135, /* 0100 -> 13.5x */ - 115, /* 0101 -> 11.5x */ - 125, /* 0110 -> 12.5x */ - 105, /* 0111 -> 10.5x */ - 130, /* 1000 -> 13.0x */ - 150, /* 1001 -> 15.0x */ - 160, /* 1010 -> 16.0x */ - 140, /* 1011 -> 14.0x */ - 120, /* 1100 -> 12.0x */ - 155, /* 1101 -> 15.5x */ - -1, /* 1110 -> RESERVED (13.0x) */ - 145 /* 1111 -> 14.5x */ -}; - -/* - * Voltage scales. Div/Mod by 1000 to get actual voltage. - * Which scale to use depends on the VRM type in use. - */ - -struct mV_pos { - unsigned short mV; - unsigned short pos; -}; - -static const struct mV_pos __initdata vrm85_mV[32] = { - {1250, 8}, {1200, 6}, {1150, 4}, {1100, 2}, - {1050, 0}, {1800, 30}, {1750, 28}, {1700, 26}, - {1650, 24}, {1600, 22}, {1550, 20}, {1500, 18}, - {1450, 16}, {1400, 14}, {1350, 12}, {1300, 10}, - {1275, 9}, {1225, 7}, {1175, 5}, {1125, 3}, - {1075, 1}, {1825, 31}, {1775, 29}, {1725, 27}, - {1675, 25}, {1625, 23}, {1575, 21}, {1525, 19}, - {1475, 17}, {1425, 15}, {1375, 13}, {1325, 11} -}; - -static const unsigned char __initdata mV_vrm85[32] = { - 0x04, 0x14, 0x03, 0x13, 0x02, 0x12, 0x01, 0x11, - 0x00, 0x10, 0x0f, 0x1f, 0x0e, 0x1e, 0x0d, 0x1d, - 0x0c, 0x1c, 0x0b, 0x1b, 0x0a, 0x1a, 0x09, 0x19, - 0x08, 0x18, 0x07, 0x17, 0x06, 0x16, 0x05, 0x15 -}; - -static const struct mV_pos __initdata mobilevrm_mV[32] = { - {1750, 31}, {1700, 30}, {1650, 29}, {1600, 28}, - {1550, 27}, {1500, 26}, {1450, 25}, {1400, 24}, - {1350, 23}, {1300, 22}, {1250, 21}, {1200, 20}, - {1150, 19}, {1100, 18}, {1050, 17}, {1000, 16}, - {975, 15}, {950, 14}, {925, 13}, {900, 12}, - {875, 11}, {850, 10}, {825, 9}, {800, 8}, - {775, 7}, {750, 6}, {725, 5}, {700, 4}, - {675, 3}, {650, 2}, {625, 1}, {600, 0} -}; - -static const unsigned char __initdata mV_mobilevrm[32] = { - 0x1f, 0x1e, 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, - 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, - 0x0f, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, - 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00 -}; - diff --git a/arch/i386/kernel/cpu/cpufreq/longrun.c b/arch/i386/kernel/cpu/cpufreq/longrun.c deleted file mode 100644 index b2689514295a..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/longrun.c +++ /dev/null @@ -1,325 +0,0 @@ -/* - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * - * Licensed under the terms of the GNU GPL License version 2. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/cpufreq.h> - -#include <asm/msr.h> -#include <asm/processor.h> -#include <asm/timex.h> - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longrun", msg) - -static struct cpufreq_driver longrun_driver; - -/** - * longrun_{low,high}_freq is needed for the conversion of cpufreq kHz - * values into per cent values. In TMTA microcode, the following is valid: - * performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) - */ -static unsigned int longrun_low_freq, longrun_high_freq; - - -/** - * longrun_get_policy - get the current LongRun policy - * @policy: struct cpufreq_policy where current policy is written into - * - * Reads the current LongRun policy by access to MSR_TMTA_LONGRUN_FLAGS - * and MSR_TMTA_LONGRUN_CTRL - */ -static void __init longrun_get_policy(struct cpufreq_policy *policy) -{ - u32 msr_lo, msr_hi; - - rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); - dprintk("longrun flags are %x - %x\n", msr_lo, msr_hi); - if (msr_lo & 0x01) - policy->policy = CPUFREQ_POLICY_PERFORMANCE; - else - policy->policy = CPUFREQ_POLICY_POWERSAVE; - - rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - dprintk("longrun ctrl is %x - %x\n", msr_lo, msr_hi); - msr_lo &= 0x0000007F; - msr_hi &= 0x0000007F; - - if ( longrun_high_freq <= longrun_low_freq ) { - /* Assume degenerate Longrun table */ - policy->min = policy->max = longrun_high_freq; - } else { - policy->min = longrun_low_freq + msr_lo * - ((longrun_high_freq - longrun_low_freq) / 100); - policy->max = longrun_low_freq + msr_hi * - ((longrun_high_freq - longrun_low_freq) / 100); - } - policy->cpu = 0; -} - - -/** - * longrun_set_policy - sets a new CPUFreq policy - * @policy: new policy - * - * Sets a new CPUFreq policy on LongRun-capable processors. This function - * has to be called with cpufreq_driver locked. - */ -static int longrun_set_policy(struct cpufreq_policy *policy) -{ - u32 msr_lo, msr_hi; - u32 pctg_lo, pctg_hi; - - if (!policy) - return -EINVAL; - - if ( longrun_high_freq <= longrun_low_freq ) { - /* Assume degenerate Longrun table */ - pctg_lo = pctg_hi = 100; - } else { - pctg_lo = (policy->min - longrun_low_freq) / - ((longrun_high_freq - longrun_low_freq) / 100); - pctg_hi = (policy->max - longrun_low_freq) / - ((longrun_high_freq - longrun_low_freq) / 100); - } - - if (pctg_hi > 100) - pctg_hi = 100; - if (pctg_lo > pctg_hi) - pctg_lo = pctg_hi; - - /* performance or economy mode */ - rdmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); - msr_lo &= 0xFFFFFFFE; - switch (policy->policy) { - case CPUFREQ_POLICY_PERFORMANCE: - msr_lo |= 0x00000001; - break; - case CPUFREQ_POLICY_POWERSAVE: - break; - } - wrmsr(MSR_TMTA_LONGRUN_FLAGS, msr_lo, msr_hi); - - /* lower and upper boundary */ - rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - msr_lo &= 0xFFFFFF80; - msr_hi &= 0xFFFFFF80; - msr_lo |= pctg_lo; - msr_hi |= pctg_hi; - wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - - return 0; -} - - -/** - * longrun_verify_poliy - verifies a new CPUFreq policy - * @policy: the policy to verify - * - * Validates a new CPUFreq policy. This function has to be called with - * cpufreq_driver locked. - */ -static int longrun_verify_policy(struct cpufreq_policy *policy) -{ - if (!policy) - return -EINVAL; - - policy->cpu = 0; - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - - if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) && - (policy->policy != CPUFREQ_POLICY_PERFORMANCE)) - return -EINVAL; - - return 0; -} - -static unsigned int longrun_get(unsigned int cpu) -{ - u32 eax, ebx, ecx, edx; - - if (cpu) - return 0; - - cpuid(0x80860007, &eax, &ebx, &ecx, &edx); - dprintk("cpuid eax is %u\n", eax); - - return (eax * 1000); -} - -/** - * longrun_determine_freqs - determines the lowest and highest possible core frequency - * @low_freq: an int to put the lowest frequency into - * @high_freq: an int to put the highest frequency into - * - * Determines the lowest and highest possible core frequencies on this CPU. - * This is necessary to calculate the performance percentage according to - * TMTA rules: - * performance_pctg = (target_freq - low_freq)/(high_freq - low_freq) - */ -static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, - unsigned int *high_freq) -{ - u32 msr_lo, msr_hi; - u32 save_lo, save_hi; - u32 eax, ebx, ecx, edx; - u32 try_hi; - struct cpuinfo_x86 *c = cpu_data; - - if (!low_freq || !high_freq) - return -EINVAL; - - if (cpu_has(c, X86_FEATURE_LRTI)) { - /* if the LongRun Table Interface is present, the - * detection is a bit easier: - * For minimum frequency, read out the maximum - * level (msr_hi), write that into "currently - * selected level", and read out the frequency. - * For maximum frequency, read out level zero. - */ - /* minimum */ - rdmsr(MSR_TMTA_LRTI_READOUT, msr_lo, msr_hi); - wrmsr(MSR_TMTA_LRTI_READOUT, msr_hi, msr_hi); - rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); - *low_freq = msr_lo * 1000; /* to kHz */ - - /* maximum */ - wrmsr(MSR_TMTA_LRTI_READOUT, 0, msr_hi); - rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); - *high_freq = msr_lo * 1000; /* to kHz */ - - dprintk("longrun table interface told %u - %u kHz\n", *low_freq, *high_freq); - - if (*low_freq > *high_freq) - *low_freq = *high_freq; - return 0; - } - - /* set the upper border to the value determined during TSC init */ - *high_freq = (cpu_khz / 1000); - *high_freq = *high_freq * 1000; - dprintk("high frequency is %u kHz\n", *high_freq); - - /* get current borders */ - rdmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - save_lo = msr_lo & 0x0000007F; - save_hi = msr_hi & 0x0000007F; - - /* if current perf_pctg is larger than 90%, we need to decrease the - * upper limit to make the calculation more accurate. - */ - cpuid(0x80860007, &eax, &ebx, &ecx, &edx); - /* try decreasing in 10% steps, some processors react only - * on some barrier values */ - for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -=10) { - /* set to 0 to try_hi perf_pctg */ - msr_lo &= 0xFFFFFF80; - msr_hi &= 0xFFFFFF80; - msr_hi |= try_hi; - wrmsr(MSR_TMTA_LONGRUN_CTRL, msr_lo, msr_hi); - - /* read out current core MHz and current perf_pctg */ - cpuid(0x80860007, &eax, &ebx, &ecx, &edx); - - /* restore values */ - wrmsr(MSR_TMTA_LONGRUN_CTRL, save_lo, save_hi); - } - dprintk("percentage is %u %%, freq is %u MHz\n", ecx, eax); - - /* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) - * eqals - * low_freq * ( 1 - perf_pctg) = (cur_freq - high_freq * perf_pctg) - * - * high_freq * perf_pctg is stored tempoarily into "ebx". - */ - ebx = (((cpu_khz / 1000) * ecx) / 100); /* to MHz */ - - if ((ecx > 95) || (ecx == 0) || (eax < ebx)) - return -EIO; - - edx = (eax - ebx) / (100 - ecx); - *low_freq = edx * 1000; /* back to kHz */ - - dprintk("low frequency is %u kHz\n", *low_freq); - - if (*low_freq > *high_freq) - *low_freq = *high_freq; - - return 0; -} - - -static int __init longrun_cpu_init(struct cpufreq_policy *policy) -{ - int result = 0; - - /* capability check */ - if (policy->cpu != 0) - return -ENODEV; - - /* detect low and high frequency */ - result = longrun_determine_freqs(&longrun_low_freq, &longrun_high_freq); - if (result) - return result; - - /* cpuinfo and default policy values */ - policy->cpuinfo.min_freq = longrun_low_freq; - policy->cpuinfo.max_freq = longrun_high_freq; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - longrun_get_policy(policy); - - return 0; -} - - -static struct cpufreq_driver longrun_driver = { - .flags = CPUFREQ_CONST_LOOPS, - .verify = longrun_verify_policy, - .setpolicy = longrun_set_policy, - .get = longrun_get, - .init = longrun_cpu_init, - .name = "longrun", - .owner = THIS_MODULE, -}; - - -/** - * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver - * - * Initializes the LongRun support. - */ -static int __init longrun_init(void) -{ - struct cpuinfo_x86 *c = cpu_data; - - if (c->x86_vendor != X86_VENDOR_TRANSMETA || - !cpu_has(c, X86_FEATURE_LONGRUN)) - return -ENODEV; - - return cpufreq_register_driver(&longrun_driver); -} - - -/** - * longrun_exit - unregisters LongRun support - */ -static void __exit longrun_exit(void) -{ - cpufreq_unregister_driver(&longrun_driver); -} - - -MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION ("LongRun driver for Transmeta Crusoe and Efficeon processors."); -MODULE_LICENSE ("GPL"); - -module_init(longrun_init); -module_exit(longrun_exit); diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c deleted file mode 100644 index 4c76b511e194..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c +++ /dev/null @@ -1,316 +0,0 @@ -/* - * Pentium 4/Xeon CPU on demand clock modulation/speed scaling - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * (C) 2002 Zwane Mwaikambo <zwane@commfireservices.com> - * (C) 2002 Arjan van de Ven <arjanv@redhat.com> - * (C) 2002 Tora T. Engstad - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * The author(s) of this software shall not be held liable for damages - * of any nature resulting due to the use of this software. This - * software is provided AS-IS with no warranties. - * - * Date Errata Description - * 20020525 N44, O17 12.5% or 25% DC causes lockup - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> -#include <linux/cpumask.h> - -#include <asm/processor.h> -#include <asm/msr.h> -#include <asm/timex.h> - -#include "speedstep-lib.h" - -#define PFX "p4-clockmod: " -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "p4-clockmod", msg) - -/* - * Duty Cycle (3bits), note DC_DISABLE is not specified in - * intel docs i just use it to mean disable - */ -enum { - DC_RESV, DC_DFLT, DC_25PT, DC_38PT, DC_50PT, - DC_64PT, DC_75PT, DC_88PT, DC_DISABLE -}; - -#define DC_ENTRIES 8 - - -static int has_N44_O17_errata[NR_CPUS]; -static unsigned int stock_freq; -static struct cpufreq_driver p4clockmod_driver; -static unsigned int cpufreq_p4_get(unsigned int cpu); - -static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) -{ - u32 l, h; - - if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV)) - return -EINVAL; - - rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h); - - if (l & 0x01) - dprintk("CPU#%d currently thermal throttled\n", cpu); - - if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT)) - newstate = DC_38PT; - - rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); - if (newstate == DC_DISABLE) { - dprintk("CPU#%d disabling modulation\n", cpu); - wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h); - } else { - dprintk("CPU#%d setting duty cycle to %d%%\n", - cpu, ((125 * newstate) / 10)); - /* bits 63 - 5 : reserved - * bit 4 : enable/disable - * bits 3-1 : duty cycle - * bit 0 : reserved - */ - l = (l & ~14); - l = l | (1<<4) | ((newstate & 0x7)<<1); - wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h); - } - - return 0; -} - - -static struct cpufreq_frequency_table p4clockmod_table[] = { - {DC_RESV, CPUFREQ_ENTRY_INVALID}, - {DC_DFLT, 0}, - {DC_25PT, 0}, - {DC_38PT, 0}, - {DC_50PT, 0}, - {DC_64PT, 0}, - {DC_75PT, 0}, - {DC_88PT, 0}, - {DC_DISABLE, 0}, - {DC_RESV, CPUFREQ_TABLE_END}, -}; - - -static int cpufreq_p4_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = DC_RESV; - struct cpufreq_freqs freqs; - int i; - - if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate)) - return -EINVAL; - - freqs.old = cpufreq_p4_get(policy->cpu); - freqs.new = stock_freq * p4clockmod_table[newstate].index / 8; - - if (freqs.new == freqs.old) - return 0; - - /* notifiers */ - for_each_cpu_mask(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - /* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software - * Developer's Manual, Volume 3 - */ - for_each_cpu_mask(i, policy->cpus) - cpufreq_p4_setdc(i, p4clockmod_table[newstate].index); - - /* notifiers */ - for_each_cpu_mask(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - - return 0; -} - - -static int cpufreq_p4_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &p4clockmod_table[0]); -} - - -static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) -{ - if (c->x86 == 0x06) { - if (cpu_has(c, X86_FEATURE_EST)) - printk(KERN_WARNING PFX "Warning: EST-capable CPU detected. " - "The acpi-cpufreq module offers voltage scaling" - " in addition of frequency scaling. You should use " - "that instead of p4-clockmod, if possible.\n"); - switch (c->x86_model) { - case 0x0E: /* Core */ - case 0x0F: /* Core Duo */ - p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE); - case 0x0D: /* Pentium M (Dothan) */ - p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - /* fall through */ - case 0x09: /* Pentium M (Banias) */ - return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM); - } - } - - if (c->x86 != 0xF) { - printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@lists.linux.org.uk>\n"); - return 0; - } - - /* on P-4s, the TSC runs with constant frequency independent whether - * throttling is active or not. */ - p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - - if (speedstep_detect_processor() == SPEEDSTEP_PROCESSOR_P4M) { - printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. " - "The speedstep-ich or acpi cpufreq modules offer " - "voltage scaling in addition of frequency scaling. " - "You should use either one instead of p4-clockmod, " - "if possible.\n"); - return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4M); - } - - return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D); -} - - - -static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *c = &cpu_data[policy->cpu]; - int cpuid = 0; - unsigned int i; - -#ifdef CONFIG_SMP - policy->cpus = cpu_sibling_map[policy->cpu]; -#endif - - /* Errata workaround */ - cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask; - switch (cpuid) { - case 0x0f07: - case 0x0f0a: - case 0x0f11: - case 0x0f12: - has_N44_O17_errata[policy->cpu] = 1; - dprintk("has errata -- disabling low frequencies\n"); - } - - /* get max frequency */ - stock_freq = cpufreq_p4_get_frequency(c); - if (!stock_freq) - return -EINVAL; - - /* table init */ - for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { - if ((i<2) && (has_N44_O17_errata[policy->cpu])) - p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; - else - p4clockmod_table[i].frequency = (stock_freq * i)/8; - } - cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu); - - /* cpuinfo and default policy values */ - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->cpuinfo.transition_latency = 1000000; /* assumed */ - policy->cur = stock_freq; - - return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]); -} - - -static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static unsigned int cpufreq_p4_get(unsigned int cpu) -{ - u32 l, h; - - rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); - - if (l & 0x10) { - l = l >> 1; - l &= 0x7; - } else - l = DC_DISABLE; - - if (l != DC_DISABLE) - return (stock_freq * l / 8); - - return stock_freq; -} - -static struct freq_attr* p4clockmod_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver p4clockmod_driver = { - .verify = cpufreq_p4_verify, - .target = cpufreq_p4_target, - .init = cpufreq_p4_cpu_init, - .exit = cpufreq_p4_cpu_exit, - .get = cpufreq_p4_get, - .name = "p4-clockmod", - .owner = THIS_MODULE, - .attr = p4clockmod_attr, -}; - - -static int __init cpufreq_p4_init(void) -{ - struct cpuinfo_x86 *c = cpu_data; - int ret; - - /* - * THERM_CONTROL is architectural for IA32 now, so - * we can rely on the capability checks - */ - if (c->x86_vendor != X86_VENDOR_INTEL) - return -ENODEV; - - if (!test_bit(X86_FEATURE_ACPI, c->x86_capability) || - !test_bit(X86_FEATURE_ACC, c->x86_capability)) - return -ENODEV; - - ret = cpufreq_register_driver(&p4clockmod_driver); - if (!ret) - printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n"); - - return (ret); -} - - -static void __exit cpufreq_p4_exit(void) -{ - cpufreq_unregister_driver(&p4clockmod_driver); -} - - -MODULE_AUTHOR ("Zwane Mwaikambo <zwane@commfireservices.com>"); -MODULE_DESCRIPTION ("cpufreq driver for Pentium(TM) 4/Xeon(TM)"); -MODULE_LICENSE ("GPL"); - -late_initcall(cpufreq_p4_init); -module_exit(cpufreq_p4_exit); diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c b/arch/i386/kernel/cpu/cpufreq/powernow-k6.c deleted file mode 100644 index f89524051e4a..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k6.c +++ /dev/null @@ -1,256 +0,0 @@ -/* - * This file was based upon code in Powertweak Linux (http://powertweak.sf.net) - * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, Dominik Brodowski. - * - * Licensed under the terms of the GNU GPL License version 2. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/ioport.h> -#include <linux/slab.h> - -#include <asm/msr.h> -#include <asm/timex.h> -#include <asm/io.h> - - -#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long - as it is unused */ - -static unsigned int busfreq; /* FSB, in 10 kHz */ -static unsigned int max_multiplier; - - -/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */ -static struct cpufreq_frequency_table clock_ratio[] = { - {45, /* 000 -> 4.5x */ 0}, - {50, /* 001 -> 5.0x */ 0}, - {40, /* 010 -> 4.0x */ 0}, - {55, /* 011 -> 5.5x */ 0}, - {20, /* 100 -> 2.0x */ 0}, - {30, /* 101 -> 3.0x */ 0}, - {60, /* 110 -> 6.0x */ 0}, - {35, /* 111 -> 3.5x */ 0}, - {0, CPUFREQ_TABLE_END} -}; - - -/** - * powernow_k6_get_cpu_multiplier - returns the current FSB multiplier - * - * Returns the current setting of the frequency multiplier. Core clock - * speed is frequency of the Front-Side Bus multiplied with this value. - */ -static int powernow_k6_get_cpu_multiplier(void) -{ - u64 invalue = 0; - u32 msrval; - - msrval = POWERNOW_IOPORT + 0x1; - wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ - invalue=inl(POWERNOW_IOPORT + 0x8); - msrval = POWERNOW_IOPORT + 0x0; - wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ - - return clock_ratio[(invalue >> 5)&7].index; -} - - -/** - * powernow_k6_set_state - set the PowerNow! multiplier - * @best_i: clock_ratio[best_i] is the target multiplier - * - * Tries to change the PowerNow! multiplier - */ -static void powernow_k6_set_state (unsigned int best_i) -{ - unsigned long outvalue=0, invalue=0; - unsigned long msrval; - struct cpufreq_freqs freqs; - - if (clock_ratio[best_i].index > max_multiplier) { - printk(KERN_ERR "cpufreq: invalid target frequency\n"); - return; - } - - freqs.old = busfreq * powernow_k6_get_cpu_multiplier(); - freqs.new = busfreq * clock_ratio[best_i].index; - freqs.cpu = 0; /* powernow-k6.c is UP only driver */ - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* we now need to transform best_i to the BVC format, see AMD#23446 */ - - outvalue = (1<<12) | (1<<10) | (1<<9) | (best_i<<5); - - msrval = POWERNOW_IOPORT + 0x1; - wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ - invalue=inl(POWERNOW_IOPORT + 0x8); - invalue = invalue & 0xf; - outvalue = outvalue | invalue; - outl(outvalue ,(POWERNOW_IOPORT + 0x8)); - msrval = POWERNOW_IOPORT + 0x0; - wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return; -} - - -/** - * powernow_k6_verify - verifies a new CPUfreq policy - * @policy: new policy - * - * Policy must be within lowest and highest possible CPU Frequency, - * and at least one possible state must be within min and max. - */ -static int powernow_k6_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &clock_ratio[0]); -} - - -/** - * powernow_k6_setpolicy - sets a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * sets a new CPUFreq policy - */ -static int powernow_k6_target (struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, &clock_ratio[0], target_freq, relation, &newstate)) - return -EINVAL; - - powernow_k6_set_state(newstate); - - return 0; -} - - -static int powernow_k6_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int i; - int result; - - if (policy->cpu != 0) - return -ENODEV; - - /* get frequencies */ - max_multiplier = powernow_k6_get_cpu_multiplier(); - busfreq = cpu_khz / max_multiplier; - - /* table init */ - for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { - if (clock_ratio[i].index > max_multiplier) - clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; - else - clock_ratio[i].frequency = busfreq * clock_ratio[i].index; - } - - /* cpuinfo and default policy values */ - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = busfreq * max_multiplier; - - result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio); - if (result) - return (result); - - cpufreq_frequency_table_get_attr(clock_ratio, policy->cpu); - - return 0; -} - - -static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) -{ - unsigned int i; - for (i=0; i<8; i++) { - if (i==max_multiplier) - powernow_k6_set_state(i); - } - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static unsigned int powernow_k6_get(unsigned int cpu) -{ - return busfreq * powernow_k6_get_cpu_multiplier(); -} - -static struct freq_attr* powernow_k6_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver powernow_k6_driver = { - .verify = powernow_k6_verify, - .target = powernow_k6_target, - .init = powernow_k6_cpu_init, - .exit = powernow_k6_cpu_exit, - .get = powernow_k6_get, - .name = "powernow-k6", - .owner = THIS_MODULE, - .attr = powernow_k6_attr, -}; - - -/** - * powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver - * - * Initializes the K6 PowerNow! support. Returns -ENODEV on unsupported - * devices, -EINVAL or -ENOMEM on problems during initiatization, and zero - * on success. - */ -static int __init powernow_k6_init(void) -{ - struct cpuinfo_x86 *c = cpu_data; - - if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) || - ((c->x86_model != 12) && (c->x86_model != 13))) - return -ENODEV; - - if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) { - printk("cpufreq: PowerNow IOPORT region already used.\n"); - return -EIO; - } - - if (cpufreq_register_driver(&powernow_k6_driver)) { - release_region (POWERNOW_IOPORT, 16); - return -EINVAL; - } - - return 0; -} - - -/** - * powernow_k6_exit - unregisters AMD K6-2+/3+ PowerNow! support - * - * Unregisters AMD K6-2+ / K6-3+ PowerNow! support. - */ -static void __exit powernow_k6_exit(void) -{ - cpufreq_unregister_driver(&powernow_k6_driver); - release_region (POWERNOW_IOPORT, 16); -} - - -MODULE_AUTHOR ("Arjan van de Ven <arjanv@redhat.com>, Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION ("PowerNow! driver for AMD K6-2+ / K6-3+ processors."); -MODULE_LICENSE ("GPL"); - -module_init(powernow_k6_init); -module_exit(powernow_k6_exit); diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c deleted file mode 100644 index ca3e1d341889..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c +++ /dev/null @@ -1,703 +0,0 @@ -/* - * AMD K7 Powernow driver. - * (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs. - * (C) 2003-2004 Dave Jones <davej@redhat.com> - * - * Licensed under the terms of the GNU GPL License version 2. - * Based upon datasheets & sample CPUs kindly provided by AMD. - * - * Errata 5: Processor may fail to execute a FID/VID change in presence of interrupt. - * - We cli/sti on stepping A0 CPUs around the FID/VID transition. - * Errata 15: Processors with half frequency multipliers may hang upon wakeup from disconnect. - * - We disable half multipliers if ACPI is used on A0 stepping CPUs. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/dmi.h> - -#include <asm/msr.h> -#include <asm/timer.h> -#include <asm/timex.h> -#include <asm/io.h> -#include <asm/system.h> - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI -#include <linux/acpi.h> -#include <acpi/processor.h> -#endif - -#include "powernow-k7.h" - -#define PFX "powernow: " - - -struct psb_s { - u8 signature[10]; - u8 tableversion; - u8 flags; - u16 settlingtime; - u8 reserved1; - u8 numpst; -}; - -struct pst_s { - u32 cpuid; - u8 fsbspeed; - u8 maxfid; - u8 startvid; - u8 numpstates; -}; - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI -union powernow_acpi_control_t { - struct { - unsigned long fid:5, - vid:5, - sgtc:20, - res1:2; - } bits; - unsigned long val; -}; -#endif - -#ifdef CONFIG_CPU_FREQ_DEBUG -/* divide by 1000 to get VCore voltage in V. */ -static const int mobile_vid_table[32] = { - 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650, - 1600, 1550, 1500, 1450, 1400, 1350, 1300, 0, - 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100, - 1075, 1050, 1025, 1000, 975, 950, 925, 0, -}; -#endif - -/* divide by 10 to get FID. */ -static const int fid_codes[32] = { - 110, 115, 120, 125, 50, 55, 60, 65, - 70, 75, 80, 85, 90, 95, 100, 105, - 30, 190, 40, 200, 130, 135, 140, 210, - 150, 225, 160, 165, 170, 180, -1, -1, -}; - -/* This parameter is used in order to force ACPI instead of legacy method for - * configuration purpose. - */ - -static int acpi_force; - -static struct cpufreq_frequency_table *powernow_table; - -static unsigned int can_scale_bus; -static unsigned int can_scale_vid; -static unsigned int minimum_speed=-1; -static unsigned int maximum_speed; -static unsigned int number_scales; -static unsigned int fsb; -static unsigned int latency; -static char have_a0; - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k7", msg) - -static int check_fsb(unsigned int fsbspeed) -{ - int delta; - unsigned int f = fsb / 1000; - - delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed; - return (delta < 5); -} - -static int check_powernow(void) -{ - struct cpuinfo_x86 *c = cpu_data; - unsigned int maxei, eax, ebx, ecx, edx; - - if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 !=6)) { -#ifdef MODULE - printk (KERN_INFO PFX "This module only works with AMD K7 CPUs\n"); -#endif - return 0; - } - - /* Get maximum capabilities */ - maxei = cpuid_eax (0x80000000); - if (maxei < 0x80000007) { /* Any powernow info ? */ -#ifdef MODULE - printk (KERN_INFO PFX "No powernow capabilities detected\n"); -#endif - return 0; - } - - if ((c->x86_model == 6) && (c->x86_mask == 0)) { - printk (KERN_INFO PFX "K7 660[A0] core detected, enabling errata workarounds\n"); - have_a0 = 1; - } - - cpuid(0x80000007, &eax, &ebx, &ecx, &edx); - - /* Check we can actually do something before we say anything.*/ - if (!(edx & (1 << 1 | 1 << 2))) - return 0; - - printk (KERN_INFO PFX "PowerNOW! Technology present. Can scale: "); - - if (edx & 1 << 1) { - printk ("frequency"); - can_scale_bus=1; - } - - if ((edx & (1 << 1 | 1 << 2)) == 0x6) - printk (" and "); - - if (edx & 1 << 2) { - printk ("voltage"); - can_scale_vid=1; - } - - printk (".\n"); - return 1; -} - - -static int get_ranges (unsigned char *pst) -{ - unsigned int j; - unsigned int speed; - u8 fid, vid; - - powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL); - if (!powernow_table) - return -ENOMEM; - - for (j=0 ; j < number_scales; j++) { - fid = *pst++; - - powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; - powernow_table[j].index = fid; /* lower 8 bits */ - - speed = powernow_table[j].frequency; - - if ((fid_codes[fid] % 10)==5) { -#ifdef CONFIG_X86_POWERNOW_K7_ACPI - if (have_a0 == 1) - powernow_table[j].frequency = CPUFREQ_ENTRY_INVALID; -#endif - } - - if (speed < minimum_speed) - minimum_speed = speed; - if (speed > maximum_speed) - maximum_speed = speed; - - vid = *pst++; - powernow_table[j].index |= (vid << 8); /* upper 8 bits */ - - dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " - "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, - fid_codes[fid] % 10, speed/1000, vid, - mobile_vid_table[vid]/1000, - mobile_vid_table[vid]%1000); - } - powernow_table[number_scales].frequency = CPUFREQ_TABLE_END; - powernow_table[number_scales].index = 0; - - return 0; -} - - -static void change_FID(int fid) -{ - union msr_fidvidctl fidvidctl; - - rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); - if (fidvidctl.bits.FID != fid) { - fidvidctl.bits.SGTC = latency; - fidvidctl.bits.FID = fid; - fidvidctl.bits.VIDC = 0; - fidvidctl.bits.FIDC = 1; - wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); - } -} - - -static void change_VID(int vid) -{ - union msr_fidvidctl fidvidctl; - - rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); - if (fidvidctl.bits.VID != vid) { - fidvidctl.bits.SGTC = latency; - fidvidctl.bits.VID = vid; - fidvidctl.bits.FIDC = 0; - fidvidctl.bits.VIDC = 1; - wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); - } -} - - -static void change_speed (unsigned int index) -{ - u8 fid, vid; - struct cpufreq_freqs freqs; - union msr_fidvidstatus fidvidstatus; - int cfid; - - /* fid are the lower 8 bits of the index we stored into - * the cpufreq frequency table in powernow_decode_bios, - * vid are the upper 8 bits. - */ - - fid = powernow_table[index].index & 0xFF; - vid = (powernow_table[index].index & 0xFF00) >> 8; - - freqs.cpu = 0; - - rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); - cfid = fidvidstatus.bits.CFID; - freqs.old = fsb * fid_codes[cfid] / 10; - - freqs.new = powernow_table[index].frequency; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* Now do the magic poking into the MSRs. */ - - if (have_a0 == 1) /* A0 errata 5 */ - local_irq_disable(); - - if (freqs.old > freqs.new) { - /* Going down, so change FID first */ - change_FID(fid); - change_VID(vid); - } else { - /* Going up, so change VID first */ - change_VID(vid); - change_FID(fid); - } - - - if (have_a0 == 1) - local_irq_enable(); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); -} - - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI - -static struct acpi_processor_performance *acpi_processor_perf; - -static int powernow_acpi_init(void) -{ - int i; - int retval = 0; - union powernow_acpi_control_t pc; - - if (acpi_processor_perf != NULL && powernow_table != NULL) { - retval = -EINVAL; - goto err0; - } - - acpi_processor_perf = kzalloc(sizeof(struct acpi_processor_performance), - GFP_KERNEL); - if (!acpi_processor_perf) { - retval = -ENOMEM; - goto err0; - } - - if (acpi_processor_register_performance(acpi_processor_perf, 0)) { - retval = -EIO; - goto err1; - } - - if (acpi_processor_perf->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) { - retval = -ENODEV; - goto err2; - } - - if (acpi_processor_perf->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) { - retval = -ENODEV; - goto err2; - } - - number_scales = acpi_processor_perf->state_count; - - if (number_scales < 2) { - retval = -ENODEV; - goto err2; - } - - powernow_table = kzalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL); - if (!powernow_table) { - retval = -ENOMEM; - goto err2; - } - - pc.val = (unsigned long) acpi_processor_perf->states[0].control; - for (i = 0; i < number_scales; i++) { - u8 fid, vid; - struct acpi_processor_px *state = - &acpi_processor_perf->states[i]; - unsigned int speed, speed_mhz; - - pc.val = (unsigned long) state->control; - dprintk ("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", - i, - (u32) state->core_frequency, - (u32) state->power, - (u32) state->transition_latency, - (u32) state->control, - pc.bits.sgtc); - - vid = pc.bits.vid; - fid = pc.bits.fid; - - powernow_table[i].frequency = fsb * fid_codes[fid] / 10; - powernow_table[i].index = fid; /* lower 8 bits */ - powernow_table[i].index |= (vid << 8); /* upper 8 bits */ - - speed = powernow_table[i].frequency; - speed_mhz = speed / 1000; - - /* processor_perflib will multiply the MHz value by 1000 to - * get a KHz value (e.g. 1266000). However, powernow-k7 works - * with true KHz values (e.g. 1266768). To ensure that all - * powernow frequencies are available, we must ensure that - * ACPI doesn't restrict them, so we round up the MHz value - * to ensure that perflib's computed KHz value is greater than - * or equal to powernow's KHz value. - */ - if (speed % 1000 > 0) - speed_mhz++; - - if ((fid_codes[fid] % 10)==5) { - if (have_a0 == 1) - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; - } - - dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " - "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, - fid_codes[fid] % 10, speed_mhz, vid, - mobile_vid_table[vid]/1000, - mobile_vid_table[vid]%1000); - - if (state->core_frequency != speed_mhz) { - state->core_frequency = speed_mhz; - dprintk(" Corrected ACPI frequency to %d\n", - speed_mhz); - } - - if (latency < pc.bits.sgtc) - latency = pc.bits.sgtc; - - if (speed < minimum_speed) - minimum_speed = speed; - if (speed > maximum_speed) - maximum_speed = speed; - } - - powernow_table[i].frequency = CPUFREQ_TABLE_END; - powernow_table[i].index = 0; - - /* notify BIOS that we exist */ - acpi_processor_notify_smm(THIS_MODULE); - - return 0; - -err2: - acpi_processor_unregister_performance(acpi_processor_perf, 0); -err1: - kfree(acpi_processor_perf); -err0: - printk(KERN_WARNING PFX "ACPI perflib can not be used in this platform\n"); - acpi_processor_perf = NULL; - return retval; -} -#else -static int powernow_acpi_init(void) -{ - printk(KERN_INFO PFX "no support for ACPI processor found." - " Please recompile your kernel with ACPI processor\n"); - return -EINVAL; -} -#endif - -static int powernow_decode_bios (int maxfid, int startvid) -{ - struct psb_s *psb; - struct pst_s *pst; - unsigned int i, j; - unsigned char *p; - unsigned int etuple; - unsigned int ret; - - etuple = cpuid_eax(0x80000001); - - for (i=0xC0000; i < 0xffff0 ; i+=16) { - - p = phys_to_virt(i); - - if (memcmp(p, "AMDK7PNOW!", 10) == 0){ - dprintk ("Found PSB header at %p\n", p); - psb = (struct psb_s *) p; - dprintk ("Table version: 0x%x\n", psb->tableversion); - if (psb->tableversion != 0x12) { - printk (KERN_INFO PFX "Sorry, only v1.2 tables supported right now\n"); - return -ENODEV; - } - - dprintk ("Flags: 0x%x\n", psb->flags); - if ((psb->flags & 1)==0) { - dprintk ("Mobile voltage regulator\n"); - } else { - dprintk ("Desktop voltage regulator\n"); - } - - latency = psb->settlingtime; - if (latency < 100) { - printk (KERN_INFO PFX "BIOS set settling time to %d microseconds." - "Should be at least 100. Correcting.\n", latency); - latency = 100; - } - dprintk ("Settling Time: %d microseconds.\n", psb->settlingtime); - dprintk ("Has %d PST tables. (Only dumping ones relevant to this CPU).\n", psb->numpst); - - p += sizeof (struct psb_s); - - pst = (struct pst_s *) p; - - for (j=0; j<psb->numpst; j++) { - pst = (struct pst_s *) p; - number_scales = pst->numpstates; - - if ((etuple == pst->cpuid) && check_fsb(pst->fsbspeed) && - (maxfid==pst->maxfid) && (startvid==pst->startvid)) - { - dprintk ("PST:%d (@%p)\n", j, pst); - dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", - pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); - - ret = get_ranges ((char *) pst + sizeof (struct pst_s)); - return ret; - } else { - unsigned int k; - p = (char *) pst + sizeof (struct pst_s); - for (k=0; k<number_scales; k++) - p+=2; - } - } - printk (KERN_INFO PFX "No PST tables match this cpuid (0x%x)\n", etuple); - printk (KERN_INFO PFX "This is indicative of a broken BIOS.\n"); - - return -EINVAL; - } - p++; - } - - return -ENODEV; -} - - -static int powernow_target (struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate; - - if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, relation, &newstate)) - return -EINVAL; - - change_speed(newstate); - - return 0; -} - - -static int powernow_verify (struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, powernow_table); -} - -/* - * We use the fact that the bus frequency is somehow - * a multiple of 100000/3 khz, then we compute sgtc according - * to this multiple. - * That way, we match more how AMD thinks all of that work. - * We will then get the same kind of behaviour already tested under - * the "well-known" other OS. - */ -static int __init fixup_sgtc(void) -{ - unsigned int sgtc; - unsigned int m; - - m = fsb / 3333; - if ((m % 10) >= 5) - m += 5; - - m /= 10; - - sgtc = 100 * m * latency; - sgtc = sgtc / 3; - if (sgtc > 0xfffff) { - printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc); - sgtc = 0xfffff; - } - return sgtc; -} - -static unsigned int powernow_get(unsigned int cpu) -{ - union msr_fidvidstatus fidvidstatus; - unsigned int cfid; - - if (cpu) - return 0; - rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); - cfid = fidvidstatus.bits.CFID; - - return (fsb * fid_codes[cfid] / 10); -} - - -static int __init acer_cpufreq_pst(struct dmi_system_id *d) -{ - printk(KERN_WARNING "%s laptop with broken PST tables in BIOS detected.\n", d->ident); - printk(KERN_WARNING "You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n"); - printk(KERN_WARNING "cpufreq scaling has been disabled as a result of this.\n"); - return 0; -} - -/* - * Some Athlon laptops have really fucked PST tables. - * A BIOS update is all that can save them. - * Mention this, and disable cpufreq. - */ -static struct dmi_system_id __initdata powernow_dmi_table[] = { - { - .callback = acer_cpufreq_pst, - .ident = "Acer Aspire", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Insyde Software"), - DMI_MATCH(DMI_BIOS_VERSION, "3A71"), - }, - }, - { } -}; - -static int __init powernow_cpu_init (struct cpufreq_policy *policy) -{ - union msr_fidvidstatus fidvidstatus; - int result; - - if (policy->cpu != 0) - return -ENODEV; - - rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); - - recalibrate_cpu_khz(); - - fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID]; - if (!fsb) { - printk(KERN_WARNING PFX "can not determine bus frequency\n"); - return -EINVAL; - } - dprintk("FSB: %3dMHz\n", fsb/1000); - - if (dmi_check_system(powernow_dmi_table) || acpi_force) { - printk (KERN_INFO PFX "PSB/PST known to be broken. Trying ACPI instead\n"); - result = powernow_acpi_init(); - } else { - result = powernow_decode_bios(fidvidstatus.bits.MFID, fidvidstatus.bits.SVID); - if (result) { - printk (KERN_INFO PFX "Trying ACPI perflib\n"); - maximum_speed = 0; - minimum_speed = -1; - latency = 0; - result = powernow_acpi_init(); - if (result) { - printk (KERN_INFO PFX "ACPI and legacy methods failed\n"); - printk (KERN_INFO PFX "See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.html\n"); - } - } else { - /* SGTC use the bus clock as timer */ - latency = fixup_sgtc(); - printk(KERN_INFO PFX "SGTC: %d\n", latency); - } - } - - if (result) - return result; - - printk (KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n", - minimum_speed/1000, maximum_speed/1000); - - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency); - - policy->cur = powernow_get(0); - - cpufreq_frequency_table_get_attr(powernow_table, policy->cpu); - - return cpufreq_frequency_table_cpuinfo(policy, powernow_table); -} - -static int powernow_cpu_exit (struct cpufreq_policy *policy) { - cpufreq_frequency_table_put_attr(policy->cpu); - -#ifdef CONFIG_X86_POWERNOW_K7_ACPI - if (acpi_processor_perf) { - acpi_processor_unregister_performance(acpi_processor_perf, 0); - kfree(acpi_processor_perf); - } -#endif - - kfree(powernow_table); - return 0; -} - -static struct freq_attr* powernow_table_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver powernow_driver = { - .verify = powernow_verify, - .target = powernow_target, - .get = powernow_get, - .init = powernow_cpu_init, - .exit = powernow_cpu_exit, - .name = "powernow-k7", - .owner = THIS_MODULE, - .attr = powernow_table_attr, -}; - -static int __init powernow_init (void) -{ - if (check_powernow()==0) - return -ENODEV; - return cpufreq_register_driver(&powernow_driver); -} - - -static void __exit powernow_exit (void) -{ - cpufreq_unregister_driver(&powernow_driver); -} - -module_param(acpi_force, int, 0444); -MODULE_PARM_DESC(acpi_force, "Force ACPI to be used."); - -MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>"); -MODULE_DESCRIPTION ("Powernow driver for AMD K7 processors."); -MODULE_LICENSE ("GPL"); - -late_initcall(powernow_init); -module_exit(powernow_exit); - diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.h b/arch/i386/kernel/cpu/cpufreq/powernow-k7.h deleted file mode 100644 index f8a63b3664e3..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * $Id: powernow-k7.h,v 1.2 2003/02/10 18:26:01 davej Exp $ - * (C) 2003 Dave Jones. - * - * Licensed under the terms of the GNU GPL License version 2. - * - * AMD-specific information - * - */ - -union msr_fidvidctl { - struct { - unsigned FID:5, // 4:0 - reserved1:3, // 7:5 - VID:5, // 12:8 - reserved2:3, // 15:13 - FIDC:1, // 16 - VIDC:1, // 17 - reserved3:2, // 19:18 - FIDCHGRATIO:1, // 20 - reserved4:11, // 31-21 - SGTC:20, // 32:51 - reserved5:12; // 63:52 - } bits; - unsigned long long val; -}; - -union msr_fidvidstatus { - struct { - unsigned CFID:5, // 4:0 - reserved1:3, // 7:5 - SFID:5, // 12:8 - reserved2:3, // 15:13 - MFID:5, // 20:16 - reserved3:11, // 31:21 - CVID:5, // 36:32 - reserved4:3, // 39:37 - SVID:5, // 44:40 - reserved5:3, // 47:45 - MVID:5, // 52:48 - reserved6:11; // 63:53 - } bits; - unsigned long long val; -}; diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c deleted file mode 100644 index 34ed53a06730..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c +++ /dev/null @@ -1,1363 +0,0 @@ -/* - * (c) 2003-2006 Advanced Micro Devices, Inc. - * Your use of this code is subject to the terms and conditions of the - * GNU general public license version 2. See "COPYING" or - * http://www.gnu.org/licenses/gpl.html - * - * Support : mark.langsdorf@amd.com - * - * Based on the powernow-k7.c module written by Dave Jones. - * (C) 2003 Dave Jones <davej@codemonkey.org.uk> on behalf of SuSE Labs - * (C) 2004 Dominik Brodowski <linux@brodo.de> - * (C) 2004 Pavel Machek <pavel@suse.cz> - * Licensed under the terms of the GNU GPL License version 2. - * Based upon datasheets & sample CPUs kindly provided by AMD. - * - * Valuable input gratefully received from Dave Jones, Pavel Machek, - * Dominik Brodowski, Jacob Shin, and others. - * Originally developed by Paul Devriendt. - * Processor information obtained from Chapter 9 (Power and Thermal Management) - * of the "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD - * Opteron Processors" available for download from www.amd.com - * - * Tables for specific CPUs can be inferred from - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf - */ - -#include <linux/kernel.h> -#include <linux/smp.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/cpumask.h> -#include <linux/sched.h> /* for current / set_cpus_allowed() */ - -#include <asm/msr.h> -#include <asm/io.h> -#include <asm/delay.h> - -#ifdef CONFIG_X86_POWERNOW_K8_ACPI -#include <linux/acpi.h> -#include <linux/mutex.h> -#include <acpi/processor.h> -#endif - -#define PFX "powernow-k8: " -#define BFX PFX "BIOS error: " -#define VERSION "version 2.00.00" -#include "powernow-k8.h" - -/* serialize freq changes */ -static DEFINE_MUTEX(fidvid_mutex); - -static struct powernow_k8_data *powernow_data[NR_CPUS]; - -static int cpu_family = CPU_OPTERON; - -#ifndef CONFIG_SMP -static cpumask_t cpu_core_map[1]; -#endif - -/* Return a frequency in MHz, given an input fid */ -static u32 find_freq_from_fid(u32 fid) -{ - return 800 + (fid * 100); -} - - -/* Return a frequency in KHz, given an input fid */ -static u32 find_khz_freq_from_fid(u32 fid) -{ - return 1000 * find_freq_from_fid(fid); -} - -/* Return a frequency in MHz, given an input fid and did */ -static u32 find_freq_from_fiddid(u32 fid, u32 did) -{ - return 100 * (fid + 0x10) >> did; -} - -static u32 find_khz_freq_from_fiddid(u32 fid, u32 did) -{ - return 1000 * find_freq_from_fiddid(fid, did); -} - -static u32 find_fid_from_pstate(u32 pstate) -{ - u32 hi, lo; - rdmsr(MSR_PSTATE_DEF_BASE + pstate, lo, hi); - return lo & HW_PSTATE_FID_MASK; -} - -static u32 find_did_from_pstate(u32 pstate) -{ - u32 hi, lo; - rdmsr(MSR_PSTATE_DEF_BASE + pstate, lo, hi); - return (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT; -} - -/* Return the vco fid for an input fid - * - * Each "low" fid has corresponding "high" fid, and you can get to "low" fids - * only from corresponding high fids. This returns "high" fid corresponding to - * "low" one. - */ -static u32 convert_fid_to_vco_fid(u32 fid) -{ - if (fid < HI_FID_TABLE_BOTTOM) - return 8 + (2 * fid); - else - return fid; -} - -/* - * Return 1 if the pending bit is set. Unless we just instructed the processor - * to transition to a new state, seeing this bit set is really bad news. - */ -static int pending_bit_stuck(void) -{ - u32 lo, hi; - - if (cpu_family == CPU_HW_PSTATE) - return 0; - - rdmsr(MSR_FIDVID_STATUS, lo, hi); - return lo & MSR_S_LO_CHANGE_PENDING ? 1 : 0; -} - -/* - * Update the global current fid / vid values from the status msr. - * Returns 1 on error. - */ -static int query_current_values_with_pending_wait(struct powernow_k8_data *data) -{ - u32 lo, hi; - u32 i = 0; - - if (cpu_family == CPU_HW_PSTATE) { - rdmsr(MSR_PSTATE_STATUS, lo, hi); - i = lo & HW_PSTATE_MASK; - rdmsr(MSR_PSTATE_DEF_BASE + i, lo, hi); - data->currfid = lo & HW_PSTATE_FID_MASK; - data->currdid = (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT; - return 0; - } - do { - if (i++ > 10000) { - dprintk("detected change pending stuck\n"); - return 1; - } - rdmsr(MSR_FIDVID_STATUS, lo, hi); - } while (lo & MSR_S_LO_CHANGE_PENDING); - - data->currvid = hi & MSR_S_HI_CURRENT_VID; - data->currfid = lo & MSR_S_LO_CURRENT_FID; - - return 0; -} - -/* the isochronous relief time */ -static void count_off_irt(struct powernow_k8_data *data) -{ - udelay((1 << data->irt) * 10); - return; -} - -/* the voltage stabalization time */ -static void count_off_vst(struct powernow_k8_data *data) -{ - udelay(data->vstable * VST_UNITS_20US); - return; -} - -/* need to init the control msr to a safe value (for each cpu) */ -static void fidvid_msr_init(void) -{ - u32 lo, hi; - u8 fid, vid; - - rdmsr(MSR_FIDVID_STATUS, lo, hi); - vid = hi & MSR_S_HI_CURRENT_VID; - fid = lo & MSR_S_LO_CURRENT_FID; - lo = fid | (vid << MSR_C_LO_VID_SHIFT); - hi = MSR_C_HI_STP_GNT_BENIGN; - dprintk("cpu%d, init lo 0x%x, hi 0x%x\n", smp_processor_id(), lo, hi); - wrmsr(MSR_FIDVID_CTL, lo, hi); -} - - -/* write the new fid value along with the other control fields to the msr */ -static int write_new_fid(struct powernow_k8_data *data, u32 fid) -{ - u32 lo; - u32 savevid = data->currvid; - u32 i = 0; - - if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) { - printk(KERN_ERR PFX "internal error - overflow on fid write\n"); - return 1; - } - - lo = fid | (data->currvid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID; - - dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n", - fid, lo, data->plllock * PLL_LOCK_CONVERSION); - - do { - wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION); - if (i++ > 100) { - printk(KERN_ERR PFX "Hardware error - pending bit very stuck - no further pstate changes possible\n"); - return 1; - } - } while (query_current_values_with_pending_wait(data)); - - count_off_irt(data); - - if (savevid != data->currvid) { - printk(KERN_ERR PFX "vid change on fid trans, old 0x%x, new 0x%x\n", - savevid, data->currvid); - return 1; - } - - if (fid != data->currfid) { - printk(KERN_ERR PFX "fid trans failed, fid 0x%x, curr 0x%x\n", fid, - data->currfid); - return 1; - } - - return 0; -} - -/* Write a new vid to the hardware */ -static int write_new_vid(struct powernow_k8_data *data, u32 vid) -{ - u32 lo; - u32 savefid = data->currfid; - int i = 0; - - if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) { - printk(KERN_ERR PFX "internal error - overflow on vid write\n"); - return 1; - } - - lo = data->currfid | (vid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID; - - dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n", - vid, lo, STOP_GRANT_5NS); - - do { - wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS); - if (i++ > 100) { - printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n"); - return 1; - } - } while (query_current_values_with_pending_wait(data)); - - if (savefid != data->currfid) { - printk(KERN_ERR PFX "fid changed on vid trans, old 0x%x new 0x%x\n", - savefid, data->currfid); - return 1; - } - - if (vid != data->currvid) { - printk(KERN_ERR PFX "vid trans failed, vid 0x%x, curr 0x%x\n", vid, - data->currvid); - return 1; - } - - return 0; -} - -/* - * Reduce the vid by the max of step or reqvid. - * Decreasing vid codes represent increasing voltages: - * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off. - */ -static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step) -{ - if ((data->currvid - reqvid) > step) - reqvid = data->currvid - step; - - if (write_new_vid(data, reqvid)) - return 1; - - count_off_vst(data); - - return 0; -} - -/* Change hardware pstate by single MSR write */ -static int transition_pstate(struct powernow_k8_data *data, u32 pstate) -{ - wrmsr(MSR_PSTATE_CTRL, pstate, 0); - data->currfid = find_fid_from_pstate(pstate); - return 0; -} - -/* Change Opteron/Athlon64 fid and vid, by the 3 phases. */ -static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 reqvid) -{ - if (core_voltage_pre_transition(data, reqvid)) - return 1; - - if (core_frequency_transition(data, reqfid)) - return 1; - - if (core_voltage_post_transition(data, reqvid)) - return 1; - - if (query_current_values_with_pending_wait(data)) - return 1; - - if ((reqfid != data->currfid) || (reqvid != data->currvid)) { - printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n", - smp_processor_id(), - reqfid, reqvid, data->currfid, data->currvid); - return 1; - } - - dprintk("transitioned (cpu%d): new fid 0x%x, vid 0x%x\n", - smp_processor_id(), data->currfid, data->currvid); - - return 0; -} - -/* Phase 1 - core voltage transition ... setup voltage */ -static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid) -{ - u32 rvosteps = data->rvo; - u32 savefid = data->currfid; - u32 maxvid, lo; - - dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n", - smp_processor_id(), - data->currfid, data->currvid, reqvid, data->rvo); - - rdmsr(MSR_FIDVID_STATUS, lo, maxvid); - maxvid = 0x1f & (maxvid >> 16); - dprintk("ph1 maxvid=0x%x\n", maxvid); - if (reqvid < maxvid) /* lower numbers are higher voltages */ - reqvid = maxvid; - - while (data->currvid > reqvid) { - dprintk("ph1: curr 0x%x, req vid 0x%x\n", - data->currvid, reqvid); - if (decrease_vid_code_by_step(data, reqvid, data->vidmvs)) - return 1; - } - - while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) { - if (data->currvid == maxvid) { - rvosteps = 0; - } else { - dprintk("ph1: changing vid for rvo, req 0x%x\n", - data->currvid - 1); - if (decrease_vid_code_by_step(data, data->currvid - 1, 1)) - return 1; - rvosteps--; - } - } - - if (query_current_values_with_pending_wait(data)) - return 1; - - if (savefid != data->currfid) { - printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", data->currfid); - return 1; - } - - dprintk("ph1 complete, currfid 0x%x, currvid 0x%x\n", - data->currfid, data->currvid); - - return 0; -} - -/* Phase 2 - core frequency transition */ -static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) -{ - u32 vcoreqfid, vcocurrfid, vcofiddiff, fid_interval, savevid = data->currvid; - - if ((reqfid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) { - printk(KERN_ERR PFX "ph2: illegal lo-lo transition 0x%x 0x%x\n", - reqfid, data->currfid); - return 1; - } - - if (data->currfid == reqfid) { - printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", data->currfid); - return 0; - } - - dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, reqfid 0x%x\n", - smp_processor_id(), - data->currfid, data->currvid, reqfid); - - vcoreqfid = convert_fid_to_vco_fid(reqfid); - vcocurrfid = convert_fid_to_vco_fid(data->currfid); - vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid - : vcoreqfid - vcocurrfid; - - while (vcofiddiff > 2) { - (data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2); - - if (reqfid > data->currfid) { - if (data->currfid > LO_FID_TABLE_TOP) { - if (write_new_fid(data, data->currfid + fid_interval)) { - return 1; - } - } else { - if (write_new_fid - (data, 2 + convert_fid_to_vco_fid(data->currfid))) { - return 1; - } - } - } else { - if (write_new_fid(data, data->currfid - fid_interval)) - return 1; - } - - vcocurrfid = convert_fid_to_vco_fid(data->currfid); - vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid - : vcoreqfid - vcocurrfid; - } - - if (write_new_fid(data, reqfid)) - return 1; - - if (query_current_values_with_pending_wait(data)) - return 1; - - if (data->currfid != reqfid) { - printk(KERN_ERR PFX - "ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n", - data->currfid, reqfid); - return 1; - } - - if (savevid != data->currvid) { - printk(KERN_ERR PFX "ph2: vid changed, save 0x%x, curr 0x%x\n", - savevid, data->currvid); - return 1; - } - - dprintk("ph2 complete, currfid 0x%x, currvid 0x%x\n", - data->currfid, data->currvid); - - return 0; -} - -/* Phase 3 - core voltage transition flow ... jump to the final vid. */ -static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid) -{ - u32 savefid = data->currfid; - u32 savereqvid = reqvid; - - dprintk("ph3 (cpu%d): starting, currfid 0x%x, currvid 0x%x\n", - smp_processor_id(), - data->currfid, data->currvid); - - if (reqvid != data->currvid) { - if (write_new_vid(data, reqvid)) - return 1; - - if (savefid != data->currfid) { - printk(KERN_ERR PFX - "ph3: bad fid change, save 0x%x, curr 0x%x\n", - savefid, data->currfid); - return 1; - } - - if (data->currvid != reqvid) { - printk(KERN_ERR PFX - "ph3: failed vid transition\n, req 0x%x, curr 0x%x", - reqvid, data->currvid); - return 1; - } - } - - if (query_current_values_with_pending_wait(data)) - return 1; - - if (savereqvid != data->currvid) { - dprintk("ph3 failed, currvid 0x%x\n", data->currvid); - return 1; - } - - if (savefid != data->currfid) { - dprintk("ph3 failed, currfid changed 0x%x\n", - data->currfid); - return 1; - } - - dprintk("ph3 complete, currfid 0x%x, currvid 0x%x\n", - data->currfid, data->currvid); - - return 0; -} - -static int check_supported_cpu(unsigned int cpu) -{ - cpumask_t oldmask = CPU_MASK_ALL; - u32 eax, ebx, ecx, edx; - unsigned int rc = 0; - - oldmask = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); - - if (smp_processor_id() != cpu) { - printk(KERN_ERR PFX "limiting to cpu %u failed\n", cpu); - goto out; - } - - if (current_cpu_data.x86_vendor != X86_VENDOR_AMD) - goto out; - - eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - if (((eax & CPUID_XFAM) != CPUID_XFAM_K8) && - ((eax & CPUID_XFAM) < CPUID_XFAM_10H)) - goto out; - - if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) { - if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || - ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) { - printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax); - goto out; - } - - eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES); - if (eax < CPUID_FREQ_VOLT_CAPABILITIES) { - printk(KERN_INFO PFX - "No frequency change capabilities detected\n"); - goto out; - } - - cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); - if ((edx & P_STATE_TRANSITION_CAPABLE) != P_STATE_TRANSITION_CAPABLE) { - printk(KERN_INFO PFX "Power state transitions not supported\n"); - goto out; - } - } else { /* must be a HW Pstate capable processor */ - cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); - if ((edx & USE_HW_PSTATE) == USE_HW_PSTATE) - cpu_family = CPU_HW_PSTATE; - else - goto out; - } - - rc = 1; - -out: - set_cpus_allowed(current, oldmask); - return rc; -} - -static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid) -{ - unsigned int j; - u8 lastfid = 0xff; - - for (j = 0; j < data->numps; j++) { - if (pst[j].vid > LEAST_VID) { - printk(KERN_ERR PFX "vid %d invalid : 0x%x\n", j, pst[j].vid); - return -EINVAL; - } - if (pst[j].vid < data->rvo) { /* vid + rvo >= 0 */ - printk(KERN_ERR BFX "0 vid exceeded with pstate %d\n", j); - return -ENODEV; - } - if (pst[j].vid < maxvid + data->rvo) { /* vid + rvo >= maxvid */ - printk(KERN_ERR BFX "maxvid exceeded with pstate %d\n", j); - return -ENODEV; - } - if (pst[j].fid > MAX_FID) { - printk(KERN_ERR BFX "maxfid exceeded with pstate %d\n", j); - return -ENODEV; - } - if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) { - /* Only first fid is allowed to be in "low" range */ - printk(KERN_ERR BFX "two low fids - %d : 0x%x\n", j, pst[j].fid); - return -EINVAL; - } - if (pst[j].fid < lastfid) - lastfid = pst[j].fid; - } - if (lastfid & 1) { - printk(KERN_ERR BFX "lastfid invalid\n"); - return -EINVAL; - } - if (lastfid > LO_FID_TABLE_TOP) - printk(KERN_INFO BFX "first fid not from lo freq table\n"); - - return 0; -} - -static void print_basics(struct powernow_k8_data *data) -{ - int j; - for (j = 0; j < data->numps; j++) { - if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID) { - if (cpu_family == CPU_HW_PSTATE) { - printk(KERN_INFO PFX " %d : fid 0x%x did 0x%x (%d MHz)\n", - j, - (data->powernow_table[j].index & 0xff00) >> 8, - (data->powernow_table[j].index & 0xff0000) >> 16, - data->powernow_table[j].frequency/1000); - } else { - printk(KERN_INFO PFX " %d : fid 0x%x (%d MHz), vid 0x%x\n", - j, - data->powernow_table[j].index & 0xff, - data->powernow_table[j].frequency/1000, - data->powernow_table[j].index >> 8); - } - } - } - if (data->batps) - printk(KERN_INFO PFX "Only %d pstates on battery\n", data->batps); -} - -static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid) -{ - struct cpufreq_frequency_table *powernow_table; - unsigned int j; - - if (data->batps) { /* use ACPI support to get full speed on mains power */ - printk(KERN_WARNING PFX "Only %d pstates usable (use ACPI driver for full range\n", data->batps); - data->numps = data->batps; - } - - for ( j=1; j<data->numps; j++ ) { - if (pst[j-1].fid >= pst[j].fid) { - printk(KERN_ERR PFX "PST out of sequence\n"); - return -EINVAL; - } - } - - if (data->numps < 2) { - printk(KERN_ERR PFX "no p states to transition\n"); - return -ENODEV; - } - - if (check_pst_table(data, pst, maxvid)) - return -EINVAL; - - powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) - * (data->numps + 1)), GFP_KERNEL); - if (!powernow_table) { - printk(KERN_ERR PFX "powernow_table memory alloc failure\n"); - return -ENOMEM; - } - - for (j = 0; j < data->numps; j++) { - powernow_table[j].index = pst[j].fid; /* lower 8 bits */ - powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */ - powernow_table[j].frequency = find_khz_freq_from_fid(pst[j].fid); - } - powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; - powernow_table[data->numps].index = 0; - - if (query_current_values_with_pending_wait(data)) { - kfree(powernow_table); - return -EIO; - } - - dprintk("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid); - data->powernow_table = powernow_table; - if (first_cpu(cpu_core_map[data->cpu]) == data->cpu) - print_basics(data); - - for (j = 0; j < data->numps; j++) - if ((pst[j].fid==data->currfid) && (pst[j].vid==data->currvid)) - return 0; - - dprintk("currfid/vid do not match PST, ignoring\n"); - return 0; -} - -/* Find and validate the PSB/PST table in BIOS. */ -static int find_psb_table(struct powernow_k8_data *data) -{ - struct psb_s *psb; - unsigned int i; - u32 mvs; - u8 maxvid; - u32 cpst = 0; - u32 thiscpuid; - - for (i = 0xc0000; i < 0xffff0; i += 0x10) { - /* Scan BIOS looking for the signature. */ - /* It can not be at ffff0 - it is too big. */ - - psb = phys_to_virt(i); - if (memcmp(psb, PSB_ID_STRING, PSB_ID_STRING_LEN) != 0) - continue; - - dprintk("found PSB header at 0x%p\n", psb); - - dprintk("table vers: 0x%x\n", psb->tableversion); - if (psb->tableversion != PSB_VERSION_1_4) { - printk(KERN_ERR BFX "PSB table is not v1.4\n"); - return -ENODEV; - } - - dprintk("flags: 0x%x\n", psb->flags1); - if (psb->flags1) { - printk(KERN_ERR BFX "unknown flags\n"); - return -ENODEV; - } - - data->vstable = psb->vstable; - dprintk("voltage stabilization time: %d(*20us)\n", data->vstable); - - dprintk("flags2: 0x%x\n", psb->flags2); - data->rvo = psb->flags2 & 3; - data->irt = ((psb->flags2) >> 2) & 3; - mvs = ((psb->flags2) >> 4) & 3; - data->vidmvs = 1 << mvs; - data->batps = ((psb->flags2) >> 6) & 3; - - dprintk("ramp voltage offset: %d\n", data->rvo); - dprintk("isochronous relief time: %d\n", data->irt); - dprintk("maximum voltage step: %d - 0x%x\n", mvs, data->vidmvs); - - dprintk("numpst: 0x%x\n", psb->num_tables); - cpst = psb->num_tables; - if ((psb->cpuid == 0x00000fc0) || (psb->cpuid == 0x00000fe0) ){ - thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - if ((thiscpuid == 0x00000fc0) || (thiscpuid == 0x00000fe0) ) { - cpst = 1; - } - } - if (cpst != 1) { - printk(KERN_ERR BFX "numpst must be 1\n"); - return -ENODEV; - } - - data->plllock = psb->plllocktime; - dprintk("plllocktime: 0x%x (units 1us)\n", psb->plllocktime); - dprintk("maxfid: 0x%x\n", psb->maxfid); - dprintk("maxvid: 0x%x\n", psb->maxvid); - maxvid = psb->maxvid; - - data->numps = psb->numps; - dprintk("numpstates: 0x%x\n", data->numps); - return fill_powernow_table(data, (struct pst_s *)(psb+1), maxvid); - } - /* - * If you see this message, complain to BIOS manufacturer. If - * he tells you "we do not support Linux" or some similar - * nonsense, remember that Windows 2000 uses the same legacy - * mechanism that the old Linux PSB driver uses. Tell them it - * is broken with Windows 2000. - * - * The reference to the AMD documentation is chapter 9 in the - * BIOS and Kernel Developer's Guide, which is available on - * www.amd.com - */ - printk(KERN_ERR PFX "BIOS error - no PSB or ACPI _PSS objects\n"); - return -ENODEV; -} - -#ifdef CONFIG_X86_POWERNOW_K8_ACPI -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) -{ - if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE)) - return; - - data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK; - data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK; - data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; - data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK; - data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK); - data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK; -} - -static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) -{ - struct cpufreq_frequency_table *powernow_table; - int ret_val; - - if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { - dprintk("register performance failed: bad ACPI data\n"); - return -EIO; - } - - /* verify the data contained in the ACPI structures */ - if (data->acpi_data.state_count <= 1) { - dprintk("No ACPI P-States\n"); - goto err_out; - } - - if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || - (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { - dprintk("Invalid control/status registers (%x - %x)\n", - data->acpi_data.control_register.space_id, - data->acpi_data.status_register.space_id); - goto err_out; - } - - /* fill in data->powernow_table */ - powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table) - * (data->acpi_data.state_count + 1)), GFP_KERNEL); - if (!powernow_table) { - dprintk("powernow_table memory alloc failure\n"); - goto err_out; - } - - if (cpu_family == CPU_HW_PSTATE) - ret_val = fill_powernow_table_pstate(data, powernow_table); - else - ret_val = fill_powernow_table_fidvid(data, powernow_table); - if (ret_val) - goto err_out_mem; - - powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END; - powernow_table[data->acpi_data.state_count].index = 0; - data->powernow_table = powernow_table; - - /* fill in data */ - data->numps = data->acpi_data.state_count; - if (first_cpu(cpu_core_map[data->cpu]) == data->cpu) - print_basics(data); - powernow_k8_acpi_pst_values(data, 0); - - /* notify BIOS that we exist */ - acpi_processor_notify_smm(THIS_MODULE); - - return 0; - -err_out_mem: - kfree(powernow_table); - -err_out: - acpi_processor_unregister_performance(&data->acpi_data, data->cpu); - - /* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */ - data->acpi_data.state_count = 0; - - return -ENODEV; -} - -static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table) -{ - int i; - - for (i = 0; i < data->acpi_data.state_count; i++) { - u32 index; - u32 hi = 0, lo = 0; - u32 fid; - u32 did; - - index = data->acpi_data.states[i].control & HW_PSTATE_MASK; - if (index > MAX_HW_PSTATE) { - printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index); - printk(KERN_ERR PFX "Please report to BIOS manufacturer\n"); - } - rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi); - if (!(hi & HW_PSTATE_VALID_MASK)) { - dprintk("invalid pstate %d, ignoring\n", index); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; - continue; - } - - fid = lo & HW_PSTATE_FID_MASK; - did = (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT; - - dprintk(" %d : fid 0x%x, did 0x%x\n", index, fid, did); - - powernow_table[i].index = index | (fid << HW_FID_INDEX_SHIFT) | (did << HW_DID_INDEX_SHIFT); - - powernow_table[i].frequency = find_khz_freq_from_fiddid(fid, did); - - if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) { - printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n", - powernow_table[i].frequency, - (unsigned int) (data->acpi_data.states[i].core_frequency * 1000)); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; - continue; - } - } - return 0; -} - -static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table) -{ - int i; - int cntlofreq = 0; - for (i = 0; i < data->acpi_data.state_count; i++) { - u32 fid; - u32 vid; - - if (data->exttype) { - fid = data->acpi_data.states[i].status & EXT_FID_MASK; - vid = (data->acpi_data.states[i].status >> VID_SHIFT) & EXT_VID_MASK; - } else { - fid = data->acpi_data.states[i].control & FID_MASK; - vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK; - } - - dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); - - powernow_table[i].index = fid; /* lower 8 bits */ - powernow_table[i].index |= (vid << 8); /* upper 8 bits */ - powernow_table[i].frequency = find_khz_freq_from_fid(fid); - - /* verify frequency is OK */ - if ((powernow_table[i].frequency > (MAX_FREQ * 1000)) || - (powernow_table[i].frequency < (MIN_FREQ * 1000))) { - dprintk("invalid freq %u kHz, ignoring\n", powernow_table[i].frequency); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; - continue; - } - - /* verify voltage is OK - BIOSs are using "off" to indicate invalid */ - if (vid == VID_OFF) { - dprintk("invalid vid %u, ignoring\n", vid); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; - continue; - } - - /* verify only 1 entry from the lo frequency table */ - if (fid < HI_FID_TABLE_BOTTOM) { - if (cntlofreq) { - /* if both entries are the same, ignore this one ... */ - if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) || - (powernow_table[i].index != powernow_table[cntlofreq].index)) { - printk(KERN_ERR PFX "Too many lo freq table entries\n"); - return 1; - } - - dprintk("double low frequency table entry, ignoring it.\n"); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; - continue; - } else - cntlofreq = i; - } - - if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) { - printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n", - powernow_table[i].frequency, - (unsigned int) (data->acpi_data.states[i].core_frequency * 1000)); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; - continue; - } - } - return 0; -} - -static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) -{ - if (data->acpi_data.state_count) - acpi_processor_unregister_performance(&data->acpi_data, data->cpu); -} - -#else -static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; } -static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; } -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; } -#endif /* CONFIG_X86_POWERNOW_K8_ACPI */ - -/* Take a frequency, and issue the fid/vid transition command */ -static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned int index) -{ - u32 fid = 0; - u32 vid = 0; - int res, i; - struct cpufreq_freqs freqs; - - dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); - - /* fid/vid correctness check for k8 */ - /* fid are the lower 8 bits of the index we stored into - * the cpufreq frequency table in find_psb_table, vid - * are the upper 8 bits. - */ - fid = data->powernow_table[index].index & 0xFF; - vid = (data->powernow_table[index].index & 0xFF00) >> 8; - - dprintk("table matched fid 0x%x, giving vid 0x%x\n", fid, vid); - - if (query_current_values_with_pending_wait(data)) - return 1; - - if ((data->currvid == vid) && (data->currfid == fid)) { - dprintk("target matches current values (fid 0x%x, vid 0x%x)\n", - fid, vid); - return 0; - } - - if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) { - printk(KERN_ERR PFX - "ignoring illegal change in lo freq table-%x to 0x%x\n", - data->currfid, fid); - return 1; - } - - dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n", - smp_processor_id(), fid, vid); - freqs.old = find_khz_freq_from_fid(data->currfid); - freqs.new = find_khz_freq_from_fid(fid); - - for_each_cpu_mask(i, *(data->available_cores)) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - res = transition_fid_vid(data, fid, vid); - freqs.new = find_khz_freq_from_fid(data->currfid); - - for_each_cpu_mask(i, *(data->available_cores)) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - return res; -} - -/* Take a frequency, and issue the hardware pstate transition command */ -static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned int index) -{ - u32 fid = 0; - u32 did = 0; - u32 pstate = 0; - int res, i; - struct cpufreq_freqs freqs; - - dprintk("cpu %d transition to index %u\n", smp_processor_id(), index); - - /* get fid did for hardware pstate transition */ - pstate = index & HW_PSTATE_MASK; - if (pstate > MAX_HW_PSTATE) - return 0; - fid = (index & HW_FID_INDEX_MASK) >> HW_FID_INDEX_SHIFT; - did = (index & HW_DID_INDEX_MASK) >> HW_DID_INDEX_SHIFT; - freqs.old = find_khz_freq_from_fiddid(data->currfid, data->currdid); - freqs.new = find_khz_freq_from_fiddid(fid, did); - - for_each_cpu_mask(i, *(data->available_cores)) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - res = transition_pstate(data, pstate); - data->currfid = find_fid_from_pstate(pstate); - data->currdid = find_did_from_pstate(pstate); - freqs.new = find_khz_freq_from_fiddid(data->currfid, data->currdid); - - for_each_cpu_mask(i, *(data->available_cores)) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - return res; -} - -/* Driver entry point to switch to the target frequency */ -static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation) -{ - cpumask_t oldmask = CPU_MASK_ALL; - struct powernow_k8_data *data = powernow_data[pol->cpu]; - u32 checkfid; - u32 checkvid; - unsigned int newstate; - int ret = -EIO; - - if (!data) - return -EINVAL; - - checkfid = data->currfid; - checkvid = data->currvid; - - /* only run on specific CPU from here on */ - oldmask = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(pol->cpu)); - - if (smp_processor_id() != pol->cpu) { - printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu); - goto err_out; - } - - if (pending_bit_stuck()) { - printk(KERN_ERR PFX "failing targ, change pending bit set\n"); - goto err_out; - } - - dprintk("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n", - pol->cpu, targfreq, pol->min, pol->max, relation); - - if (query_current_values_with_pending_wait(data)) - goto err_out; - - if (cpu_family == CPU_HW_PSTATE) - dprintk("targ: curr fid 0x%x, did 0x%x\n", - data->currfid, data->currdid); - else { - dprintk("targ: curr fid 0x%x, vid 0x%x\n", - data->currfid, data->currvid); - - if ((checkvid != data->currvid) || (checkfid != data->currfid)) { - printk(KERN_INFO PFX - "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n", - checkfid, data->currfid, checkvid, data->currvid); - } - } - - if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate)) - goto err_out; - - mutex_lock(&fidvid_mutex); - - powernow_k8_acpi_pst_values(data, newstate); - - if (cpu_family == CPU_HW_PSTATE) - ret = transition_frequency_pstate(data, newstate); - else - ret = transition_frequency_fidvid(data, newstate); - if (ret) { - printk(KERN_ERR PFX "transition frequency failed\n"); - ret = 1; - mutex_unlock(&fidvid_mutex); - goto err_out; - } - mutex_unlock(&fidvid_mutex); - - if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid); - else - pol->cur = find_khz_freq_from_fid(data->currfid); - ret = 0; - -err_out: - set_cpus_allowed(current, oldmask); - return ret; -} - -/* Driver entry point to verify the policy and range of frequencies */ -static int powernowk8_verify(struct cpufreq_policy *pol) -{ - struct powernow_k8_data *data = powernow_data[pol->cpu]; - - if (!data) - return -EINVAL; - - return cpufreq_frequency_table_verify(pol, data->powernow_table); -} - -/* per CPU init entry point to the driver */ -static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) -{ - struct powernow_k8_data *data; - cpumask_t oldmask = CPU_MASK_ALL; - int rc; - - if (!cpu_online(pol->cpu)) - return -ENODEV; - - if (!check_supported_cpu(pol->cpu)) - return -ENODEV; - - data = kzalloc(sizeof(struct powernow_k8_data), GFP_KERNEL); - if (!data) { - printk(KERN_ERR PFX "unable to alloc powernow_k8_data"); - return -ENOMEM; - } - - data->cpu = pol->cpu; - - if (powernow_k8_cpu_init_acpi(data)) { - /* - * Use the PSB BIOS structure. This is only availabe on - * an UP version, and is deprecated by AMD. - */ - if (num_online_cpus() != 1) { - printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n"); - kfree(data); - return -ENODEV; - } - if (pol->cpu != 0) { - printk(KERN_ERR PFX "No _PSS objects for CPU other than CPU0\n"); - kfree(data); - return -ENODEV; - } - rc = find_psb_table(data); - if (rc) { - kfree(data); - return -ENODEV; - } - } - - /* only run on specific CPU from here on */ - oldmask = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(pol->cpu)); - - if (smp_processor_id() != pol->cpu) { - printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu); - goto err_out; - } - - if (pending_bit_stuck()) { - printk(KERN_ERR PFX "failing init, change pending bit set\n"); - goto err_out; - } - - if (query_current_values_with_pending_wait(data)) - goto err_out; - - if (cpu_family == CPU_OPTERON) - fidvid_msr_init(); - - /* run on any CPU again */ - set_cpus_allowed(current, oldmask); - - pol->governor = CPUFREQ_DEFAULT_GOVERNOR; - if (cpu_family == CPU_HW_PSTATE) - pol->cpus = cpumask_of_cpu(pol->cpu); - else - pol->cpus = cpu_core_map[pol->cpu]; - data->available_cores = &(pol->cpus); - - /* Take a crude guess here. - * That guess was in microseconds, so multiply with 1000 */ - pol->cpuinfo.transition_latency = (((data->rvo + 8) * data->vstable * VST_UNITS_20US) - + (3 * (1 << data->irt) * 10)) * 1000; - - if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid); - else - pol->cur = find_khz_freq_from_fid(data->currfid); - dprintk("policy current frequency %d kHz\n", pol->cur); - - /* min/max the cpu is capable of */ - if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) { - printk(KERN_ERR PFX "invalid powernow_table\n"); - powernow_k8_cpu_exit_acpi(data); - kfree(data->powernow_table); - kfree(data); - return -EINVAL; - } - - cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu); - - if (cpu_family == CPU_HW_PSTATE) - dprintk("cpu_init done, current fid 0x%x, did 0x%x\n", - data->currfid, data->currdid); - else - dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n", - data->currfid, data->currvid); - - powernow_data[pol->cpu] = data; - - return 0; - -err_out: - set_cpus_allowed(current, oldmask); - powernow_k8_cpu_exit_acpi(data); - - kfree(data); - return -ENODEV; -} - -static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol) -{ - struct powernow_k8_data *data = powernow_data[pol->cpu]; - - if (!data) - return -EINVAL; - - powernow_k8_cpu_exit_acpi(data); - - cpufreq_frequency_table_put_attr(pol->cpu); - - kfree(data->powernow_table); - kfree(data); - - return 0; -} - -static unsigned int powernowk8_get (unsigned int cpu) -{ - struct powernow_k8_data *data; - cpumask_t oldmask = current->cpus_allowed; - unsigned int khz = 0; - - data = powernow_data[first_cpu(cpu_core_map[cpu])]; - - if (!data) - return -EINVAL; - - set_cpus_allowed(current, cpumask_of_cpu(cpu)); - if (smp_processor_id() != cpu) { - printk(KERN_ERR PFX "limiting to CPU %d failed in powernowk8_get\n", cpu); - set_cpus_allowed(current, oldmask); - return 0; - } - - if (query_current_values_with_pending_wait(data)) - goto out; - - if (cpu_family == CPU_HW_PSTATE) - khz = find_khz_freq_from_fiddid(data->currfid, data->currdid); - else - khz = find_khz_freq_from_fid(data->currfid); - - -out: - set_cpus_allowed(current, oldmask); - return khz; -} - -static struct freq_attr* powernow_k8_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver cpufreq_amd64_driver = { - .verify = powernowk8_verify, - .target = powernowk8_target, - .init = powernowk8_cpu_init, - .exit = __devexit_p(powernowk8_cpu_exit), - .get = powernowk8_get, - .name = "powernow-k8", - .owner = THIS_MODULE, - .attr = powernow_k8_attr, -}; - -/* driver entry point for init */ -static int __cpuinit powernowk8_init(void) -{ - unsigned int i, supported_cpus = 0; - unsigned int booted_cores = 1; - - for_each_online_cpu(i) { - if (check_supported_cpu(i)) - supported_cpus++; - } - -#ifdef CONFIG_SMP - booted_cores = cpu_data[0].booted_cores; -#endif - - if (supported_cpus == num_online_cpus()) { - printk(KERN_INFO PFX "Found %d %s " - "processors (%d cpu cores) (" VERSION ")\n", - supported_cpus/booted_cores, - boot_cpu_data.x86_model_id, supported_cpus); - return cpufreq_register_driver(&cpufreq_amd64_driver); - } - - return -ENODEV; -} - -/* driver entry point for term */ -static void __exit powernowk8_exit(void) -{ - dprintk("exit\n"); - - cpufreq_unregister_driver(&cpufreq_amd64_driver); -} - -MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com>"); -MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver."); -MODULE_LICENSE("GPL"); - -late_initcall(powernowk8_init); -module_exit(powernowk8_exit); diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h deleted file mode 100644 index b06c812208ca..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h +++ /dev/null @@ -1,232 +0,0 @@ -/* - * (c) 2003-2006 Advanced Micro Devices, Inc. - * Your use of this code is subject to the terms and conditions of the - * GNU general public license version 2. See "COPYING" or - * http://www.gnu.org/licenses/gpl.html - */ - -struct powernow_k8_data { - unsigned int cpu; - - u32 numps; /* number of p-states */ - u32 batps; /* number of p-states supported on battery */ - - /* these values are constant when the PSB is used to determine - * vid/fid pairings, but are modified during the ->target() call - * when ACPI is used */ - u32 rvo; /* ramp voltage offset */ - u32 irt; /* isochronous relief time */ - u32 vidmvs; /* usable value calculated from mvs */ - u32 vstable; /* voltage stabilization time, units 20 us */ - u32 plllock; /* pll lock time, units 1 us */ - u32 exttype; /* extended interface = 1 */ - - /* keep track of the current fid / vid or did */ - u32 currvid, currfid, currdid; - - /* the powernow_table includes all frequency and vid/fid pairings: - * fid are the lower 8 bits of the index, vid are the upper 8 bits. - * frequency is in kHz */ - struct cpufreq_frequency_table *powernow_table; - -#ifdef CONFIG_X86_POWERNOW_K8_ACPI - /* the acpi table needs to be kept. it's only available if ACPI was - * used to determine valid frequency/vid/fid states */ - struct acpi_processor_performance acpi_data; -#endif - /* we need to keep track of associated cores, but let cpufreq - * handle hotplug events - so just point at cpufreq pol->cpus - * structure */ - cpumask_t *available_cores; -}; - - -/* processor's cpuid instruction support */ -#define CPUID_PROCESSOR_SIGNATURE 1 /* function 1 */ -#define CPUID_XFAM 0x0ff00000 /* extended family */ -#define CPUID_XFAM_K8 0 -#define CPUID_XMOD 0x000f0000 /* extended model */ -#define CPUID_XMOD_REV_MASK 0x00080000 -#define CPUID_XFAM_10H 0x00100000 /* family 0x10 */ -#define CPUID_USE_XFAM_XMOD 0x00000f00 -#define CPUID_GET_MAX_CAPABILITIES 0x80000000 -#define CPUID_FREQ_VOLT_CAPABILITIES 0x80000007 -#define P_STATE_TRANSITION_CAPABLE 6 - -/* Model Specific Registers for p-state transitions. MSRs are 64-bit. For */ -/* writes (wrmsr - opcode 0f 30), the register number is placed in ecx, and */ -/* the value to write is placed in edx:eax. For reads (rdmsr - opcode 0f 32), */ -/* the register number is placed in ecx, and the data is returned in edx:eax. */ - -#define MSR_FIDVID_CTL 0xc0010041 -#define MSR_FIDVID_STATUS 0xc0010042 - -/* Field definitions within the FID VID Low Control MSR : */ -#define MSR_C_LO_INIT_FID_VID 0x00010000 -#define MSR_C_LO_NEW_VID 0x00003f00 -#define MSR_C_LO_NEW_FID 0x0000003f -#define MSR_C_LO_VID_SHIFT 8 - -/* Field definitions within the FID VID High Control MSR : */ -#define MSR_C_HI_STP_GNT_TO 0x000fffff - -/* Field definitions within the FID VID Low Status MSR : */ -#define MSR_S_LO_CHANGE_PENDING 0x80000000 /* cleared when completed */ -#define MSR_S_LO_MAX_RAMP_VID 0x3f000000 -#define MSR_S_LO_MAX_FID 0x003f0000 -#define MSR_S_LO_START_FID 0x00003f00 -#define MSR_S_LO_CURRENT_FID 0x0000003f - -/* Field definitions within the FID VID High Status MSR : */ -#define MSR_S_HI_MIN_WORKING_VID 0x3f000000 -#define MSR_S_HI_MAX_WORKING_VID 0x003f0000 -#define MSR_S_HI_START_VID 0x00003f00 -#define MSR_S_HI_CURRENT_VID 0x0000003f -#define MSR_C_HI_STP_GNT_BENIGN 0x00000001 - - -/* Hardware Pstate _PSS and MSR definitions */ -#define USE_HW_PSTATE 0x00000080 -#define HW_PSTATE_FID_MASK 0x0000003f -#define HW_PSTATE_DID_MASK 0x000001c0 -#define HW_PSTATE_DID_SHIFT 6 -#define HW_PSTATE_MASK 0x00000007 -#define HW_PSTATE_VALID_MASK 0x80000000 -#define HW_FID_INDEX_SHIFT 8 -#define HW_FID_INDEX_MASK 0x0000ff00 -#define HW_DID_INDEX_SHIFT 16 -#define HW_DID_INDEX_MASK 0x00ff0000 -#define HW_WATTS_MASK 0xff -#define HW_PWR_DVR_MASK 0x300 -#define HW_PWR_DVR_SHIFT 8 -#define HW_PWR_MAX_MULT 3 -#define MAX_HW_PSTATE 8 /* hw pstate supports up to 8 */ -#define MSR_PSTATE_DEF_BASE 0xc0010064 /* base of Pstate MSRs */ -#define MSR_PSTATE_STATUS 0xc0010063 /* Pstate Status MSR */ -#define MSR_PSTATE_CTRL 0xc0010062 /* Pstate control MSR */ - -/* define the two driver architectures */ -#define CPU_OPTERON 0 -#define CPU_HW_PSTATE 1 - - -/* - * There are restrictions frequencies have to follow: - * - only 1 entry in the low fid table ( <=1.4GHz ) - * - lowest entry in the high fid table must be >= 2 * the entry in the - * low fid table - * - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry - * in the low fid table - * - the parts can only step at <= 200 MHz intervals, odd fid values are - * supported in revision G and later revisions. - * - lowest frequency must be >= interprocessor hypertransport link speed - * (only applies to MP systems obviously) - */ - -/* fids (frequency identifiers) are arranged in 2 tables - lo and hi */ -#define LO_FID_TABLE_TOP 7 /* fid values marking the boundary */ -#define HI_FID_TABLE_BOTTOM 8 /* between the low and high tables */ - -#define LO_VCOFREQ_TABLE_TOP 1400 /* corresponding vco frequency values */ -#define HI_VCOFREQ_TABLE_BOTTOM 1600 - -#define MIN_FREQ_RESOLUTION 200 /* fids jump by 2 matching freq jumps by 200 */ - -#define MAX_FID 0x2a /* Spec only gives FID values as far as 5 GHz */ -#define LEAST_VID 0x3e /* Lowest (numerically highest) useful vid value */ - -#define MIN_FREQ 800 /* Min and max freqs, per spec */ -#define MAX_FREQ 5000 - -#define INVALID_FID_MASK 0xffffffc0 /* not a valid fid if these bits are set */ -#define INVALID_VID_MASK 0xffffffc0 /* not a valid vid if these bits are set */ - -#define VID_OFF 0x3f - -#define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */ - -#define PLL_LOCK_CONVERSION (1000/5) /* ms to ns, then divide by clock period */ - -#define MAXIMUM_VID_STEPS 1 /* Current cpus only allow a single step of 25mV */ -#define VST_UNITS_20US 20 /* Voltage Stabalization Time is in units of 20us */ - -/* - * Most values of interest are enocoded in a single field of the _PSS - * entries: the "control" value. - */ - -#define IRT_SHIFT 30 -#define RVO_SHIFT 28 -#define EXT_TYPE_SHIFT 27 -#define PLL_L_SHIFT 20 -#define MVS_SHIFT 18 -#define VST_SHIFT 11 -#define VID_SHIFT 6 -#define IRT_MASK 3 -#define RVO_MASK 3 -#define EXT_TYPE_MASK 1 -#define PLL_L_MASK 0x7f -#define MVS_MASK 3 -#define VST_MASK 0x7f -#define VID_MASK 0x1f -#define FID_MASK 0x1f -#define EXT_VID_MASK 0x3f -#define EXT_FID_MASK 0x3f - - -/* - * Version 1.4 of the PSB table. This table is constructed by BIOS and is - * to tell the OS's power management driver which VIDs and FIDs are - * supported by this particular processor. - * If the data in the PSB / PST is wrong, then this driver will program the - * wrong values into hardware, which is very likely to lead to a crash. - */ - -#define PSB_ID_STRING "AMDK7PNOW!" -#define PSB_ID_STRING_LEN 10 - -#define PSB_VERSION_1_4 0x14 - -struct psb_s { - u8 signature[10]; - u8 tableversion; - u8 flags1; - u16 vstable; - u8 flags2; - u8 num_tables; - u32 cpuid; - u8 plllocktime; - u8 maxfid; - u8 maxvid; - u8 numps; -}; - -/* Pairs of fid/vid values are appended to the version 1.4 PSB table. */ -struct pst_s { - u8 fid; - u8 vid; -}; - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg) - -static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid); -static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid); -static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); - -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index); - -#ifdef CONFIG_X86_POWERNOW_K8_ACPI -static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); -static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); -#endif - -#ifdef CONFIG_SMP -static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) -{ -} -#else -static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) -{ - cpu_set(0, cpu_sharedcore_mask[0]); -} -#endif diff --git a/arch/i386/kernel/cpu/cpufreq/sc520_freq.c b/arch/i386/kernel/cpu/cpufreq/sc520_freq.c deleted file mode 100644 index b8fb4b521c62..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/sc520_freq.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * sc520_freq.c: cpufreq driver for the AMD Elan sc520 - * - * Copyright (C) 2005 Sean Young <sean@mess.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Based on elanfreq.c - * - * 2005-03-30: - initial revision - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> - -#include <linux/delay.h> -#include <linux/cpufreq.h> - -#include <asm/msr.h> -#include <asm/timex.h> -#include <asm/io.h> - -#define MMCR_BASE 0xfffef000 /* The default base address */ -#define OFFS_CPUCTL 0x2 /* CPU Control Register */ - -static __u8 __iomem *cpuctl; - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "sc520_freq", msg) - -static struct cpufreq_frequency_table sc520_freq_table[] = { - {0x01, 100000}, - {0x02, 133000}, - {0, CPUFREQ_TABLE_END}, -}; - -static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) -{ - u8 clockspeed_reg = *cpuctl; - - switch (clockspeed_reg & 0x03) { - default: - printk(KERN_ERR "sc520_freq: error: cpuctl register has unexpected value %02x\n", clockspeed_reg); - case 0x01: - return 100000; - case 0x02: - return 133000; - } -} - -static void sc520_freq_set_cpu_state (unsigned int state) -{ - - struct cpufreq_freqs freqs; - u8 clockspeed_reg; - - freqs.old = sc520_freq_get_cpu_frequency(0); - freqs.new = sc520_freq_table[state].frequency; - freqs.cpu = 0; /* AMD Elan is UP */ - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - dprintk("attempting to set frequency to %i kHz\n", - sc520_freq_table[state].frequency); - - local_irq_disable(); - - clockspeed_reg = *cpuctl & ~0x03; - *cpuctl = clockspeed_reg | sc520_freq_table[state].index; - - local_irq_enable(); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); -}; - -static int sc520_freq_verify (struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]); -} - -static int sc520_freq_target (struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, sc520_freq_table, target_freq, relation, &newstate)) - return -EINVAL; - - sc520_freq_set_cpu_state(newstate); - - return 0; -} - - -/* - * Module init and exit code - */ - -static int sc520_freq_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *c = cpu_data; - int result; - - /* capability check */ - if (c->x86_vendor != X86_VENDOR_AMD || - c->x86 != 4 || c->x86_model != 9) - return -ENODEV; - - /* cpuinfo and default policy values */ - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->cpuinfo.transition_latency = 1000000; /* 1ms */ - policy->cur = sc520_freq_get_cpu_frequency(0); - - result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table); - if (result) - return (result); - - cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu); - - return 0; -} - - -static int sc520_freq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - - -static struct freq_attr* sc520_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - -static struct cpufreq_driver sc520_freq_driver = { - .get = sc520_freq_get_cpu_frequency, - .verify = sc520_freq_verify, - .target = sc520_freq_target, - .init = sc520_freq_cpu_init, - .exit = sc520_freq_cpu_exit, - .name = "sc520_freq", - .owner = THIS_MODULE, - .attr = sc520_freq_attr, -}; - - -static int __init sc520_freq_init(void) -{ - struct cpuinfo_x86 *c = cpu_data; - int err; - - /* Test if we have the right hardware */ - if(c->x86_vendor != X86_VENDOR_AMD || - c->x86 != 4 || c->x86_model != 9) { - dprintk("no Elan SC520 processor found!\n"); - return -ENODEV; - } - cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); - if(!cpuctl) { - printk(KERN_ERR "sc520_freq: error: failed to remap memory\n"); - return -ENOMEM; - } - - err = cpufreq_register_driver(&sc520_freq_driver); - if (err) - iounmap(cpuctl); - - return err; -} - - -static void __exit sc520_freq_exit(void) -{ - cpufreq_unregister_driver(&sc520_freq_driver); - iounmap(cpuctl); -} - - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Sean Young <sean@mess.org>"); -MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU"); - -module_init(sc520_freq_init); -module_exit(sc520_freq_exit); - diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c deleted file mode 100644 index 6c5dc2c85aeb..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c +++ /dev/null @@ -1,634 +0,0 @@ -/* - * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium - * M (part of the Centrino chipset). - * - * Since the original Pentium M, most new Intel CPUs support Enhanced - * SpeedStep. - * - * Despite the "SpeedStep" in the name, this is almost entirely unlike - * traditional SpeedStep. - * - * Modelled on speedstep.c - * - * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/sched.h> /* current */ -#include <linux/delay.h> -#include <linux/compiler.h> - -#include <asm/msr.h> -#include <asm/processor.h> -#include <asm/cpufeature.h> - -#define PFX "speedstep-centrino: " -#define MAINTAINER "cpufreq@lists.linux.org.uk" - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg) - -#define INTEL_MSR_RANGE (0xffff) - -struct cpu_id -{ - __u8 x86; /* CPU family */ - __u8 x86_model; /* model */ - __u8 x86_mask; /* stepping */ -}; - -enum { - CPU_BANIAS, - CPU_DOTHAN_A1, - CPU_DOTHAN_A2, - CPU_DOTHAN_B0, - CPU_MP4HT_D0, - CPU_MP4HT_E0, -}; - -static const struct cpu_id cpu_ids[] = { - [CPU_BANIAS] = { 6, 9, 5 }, - [CPU_DOTHAN_A1] = { 6, 13, 1 }, - [CPU_DOTHAN_A2] = { 6, 13, 2 }, - [CPU_DOTHAN_B0] = { 6, 13, 6 }, - [CPU_MP4HT_D0] = {15, 3, 4 }, - [CPU_MP4HT_E0] = {15, 4, 1 }, -}; -#define N_IDS ARRAY_SIZE(cpu_ids) - -struct cpu_model -{ - const struct cpu_id *cpu_id; - const char *model_name; - unsigned max_freq; /* max clock in kHz */ - - struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */ -}; -static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x); - -/* Operating points for current CPU */ -static struct cpu_model *centrino_model[NR_CPUS]; -static const struct cpu_id *centrino_cpu[NR_CPUS]; - -static struct cpufreq_driver centrino_driver; - -#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE - -/* Computes the correct form for IA32_PERF_CTL MSR for a particular - frequency/voltage operating point; frequency in MHz, volts in mV. - This is stored as "index" in the structure. */ -#define OP(mhz, mv) \ - { \ - .frequency = (mhz) * 1000, \ - .index = (((mhz)/100) << 8) | ((mv - 700) / 16) \ - } - -/* - * These voltage tables were derived from the Intel Pentium M - * datasheet, document 25261202.pdf, Table 5. I have verified they - * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium - * M. - */ - -/* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */ -static struct cpufreq_frequency_table banias_900[] = -{ - OP(600, 844), - OP(800, 988), - OP(900, 1004), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */ -static struct cpufreq_frequency_table banias_1000[] = -{ - OP(600, 844), - OP(800, 972), - OP(900, 988), - OP(1000, 1004), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */ -static struct cpufreq_frequency_table banias_1100[] = -{ - OP( 600, 956), - OP( 800, 1020), - OP( 900, 1100), - OP(1000, 1164), - OP(1100, 1180), - { .frequency = CPUFREQ_TABLE_END } -}; - - -/* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */ -static struct cpufreq_frequency_table banias_1200[] = -{ - OP( 600, 956), - OP( 800, 1004), - OP( 900, 1020), - OP(1000, 1100), - OP(1100, 1164), - OP(1200, 1180), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.30GHz (Banias) */ -static struct cpufreq_frequency_table banias_1300[] = -{ - OP( 600, 956), - OP( 800, 1260), - OP(1000, 1292), - OP(1200, 1356), - OP(1300, 1388), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.40GHz (Banias) */ -static struct cpufreq_frequency_table banias_1400[] = -{ - OP( 600, 956), - OP( 800, 1180), - OP(1000, 1308), - OP(1200, 1436), - OP(1400, 1484), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.50GHz (Banias) */ -static struct cpufreq_frequency_table banias_1500[] = -{ - OP( 600, 956), - OP( 800, 1116), - OP(1000, 1228), - OP(1200, 1356), - OP(1400, 1452), - OP(1500, 1484), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.60GHz (Banias) */ -static struct cpufreq_frequency_table banias_1600[] = -{ - OP( 600, 956), - OP( 800, 1036), - OP(1000, 1164), - OP(1200, 1276), - OP(1400, 1420), - OP(1600, 1484), - { .frequency = CPUFREQ_TABLE_END } -}; - -/* Intel Pentium M processor 1.70GHz (Banias) */ -static struct cpufreq_frequency_table banias_1700[] = -{ - OP( 600, 956), - OP( 800, 1004), - OP(1000, 1116), - OP(1200, 1228), - OP(1400, 1308), - OP(1700, 1484), - { .frequency = CPUFREQ_TABLE_END } -}; -#undef OP - -#define _BANIAS(cpuid, max, name) \ -{ .cpu_id = cpuid, \ - .model_name = "Intel(R) Pentium(R) M processor " name "MHz", \ - .max_freq = (max)*1000, \ - .op_points = banias_##max, \ -} -#define BANIAS(max) _BANIAS(&cpu_ids[CPU_BANIAS], max, #max) - -/* CPU models, their operating frequency range, and freq/voltage - operating points */ -static struct cpu_model models[] = -{ - _BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"), - BANIAS(1000), - BANIAS(1100), - BANIAS(1200), - BANIAS(1300), - BANIAS(1400), - BANIAS(1500), - BANIAS(1600), - BANIAS(1700), - - /* NULL model_name is a wildcard */ - { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL }, - { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL }, - { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL }, - { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL }, - { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL }, - - { NULL, } -}; -#undef _BANIAS -#undef BANIAS - -static int centrino_cpu_init_table(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *cpu = &cpu_data[policy->cpu]; - struct cpu_model *model; - - for(model = models; model->cpu_id != NULL; model++) - if (centrino_verify_cpu_id(cpu, model->cpu_id) && - (model->model_name == NULL || - strcmp(cpu->x86_model_id, model->model_name) == 0)) - break; - - if (model->cpu_id == NULL) { - /* No match at all */ - dprintk("no support for CPU model \"%s\": " - "send /proc/cpuinfo to " MAINTAINER "\n", - cpu->x86_model_id); - return -ENOENT; - } - - if (model->op_points == NULL) { - /* Matched a non-match */ - dprintk("no table support for CPU model \"%s\"\n", - cpu->x86_model_id); - dprintk("try using the acpi-cpufreq driver\n"); - return -ENOENT; - } - - centrino_model[policy->cpu] = model; - - dprintk("found \"%s\": max frequency: %dkHz\n", - model->model_name, model->max_freq); - - return 0; -} - -#else -static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) { return -ENODEV; } -#endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */ - -static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x) -{ - if ((c->x86 == x->x86) && - (c->x86_model == x->x86_model) && - (c->x86_mask == x->x86_mask)) - return 1; - return 0; -} - -/* To be called only after centrino_model is initialized */ -static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe) -{ - int i; - - /* - * Extract clock in kHz from PERF_CTL value - * for centrino, as some DSDTs are buggy. - * Ideally, this can be done using the acpi_data structure. - */ - if ((centrino_cpu[cpu] == &cpu_ids[CPU_BANIAS]) || - (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_A1]) || - (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_B0])) { - msr = (msr >> 8) & 0xff; - return msr * 100000; - } - - if ((!centrino_model[cpu]) || (!centrino_model[cpu]->op_points)) - return 0; - - msr &= 0xffff; - for (i=0;centrino_model[cpu]->op_points[i].frequency != CPUFREQ_TABLE_END; i++) { - if (msr == centrino_model[cpu]->op_points[i].index) - return centrino_model[cpu]->op_points[i].frequency; - } - if (failsafe) - return centrino_model[cpu]->op_points[i-1].frequency; - else - return 0; -} - -/* Return the current CPU frequency in kHz */ -static unsigned int get_cur_freq(unsigned int cpu) -{ - unsigned l, h; - unsigned clock_freq; - cpumask_t saved_mask; - - saved_mask = current->cpus_allowed; - set_cpus_allowed(current, cpumask_of_cpu(cpu)); - if (smp_processor_id() != cpu) - return 0; - - rdmsr(MSR_IA32_PERF_STATUS, l, h); - clock_freq = extract_clock(l, cpu, 0); - - if (unlikely(clock_freq == 0)) { - /* - * On some CPUs, we can see transient MSR values (which are - * not present in _PSS), while CPU is doing some automatic - * P-state transition (like TM2). Get the last freq set - * in PERF_CTL. - */ - rdmsr(MSR_IA32_PERF_CTL, l, h); - clock_freq = extract_clock(l, cpu, 1); - } - - set_cpus_allowed(current, saved_mask); - return clock_freq; -} - - -static int centrino_cpu_init(struct cpufreq_policy *policy) -{ - struct cpuinfo_x86 *cpu = &cpu_data[policy->cpu]; - unsigned freq; - unsigned l, h; - int ret; - int i; - - /* Only Intel makes Enhanced Speedstep-capable CPUs */ - if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST)) - return -ENODEV; - - if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC)) - centrino_driver.flags |= CPUFREQ_CONST_LOOPS; - - if (policy->cpu != 0) - return -ENODEV; - - for (i = 0; i < N_IDS; i++) - if (centrino_verify_cpu_id(cpu, &cpu_ids[i])) - break; - - if (i != N_IDS) - centrino_cpu[policy->cpu] = &cpu_ids[i]; - - if (!centrino_cpu[policy->cpu]) { - dprintk("found unsupported CPU with " - "Enhanced SpeedStep: send /proc/cpuinfo to " - MAINTAINER "\n"); - return -ENODEV; - } - - if (centrino_cpu_init_table(policy)) { - return -ENODEV; - } - - /* Check to see if Enhanced SpeedStep is enabled, and try to - enable it if not. */ - rdmsr(MSR_IA32_MISC_ENABLE, l, h); - - if (!(l & (1<<16))) { - l |= (1<<16); - dprintk("trying to enable Enhanced SpeedStep (%x)\n", l); - wrmsr(MSR_IA32_MISC_ENABLE, l, h); - - /* check to see if it stuck */ - rdmsr(MSR_IA32_MISC_ENABLE, l, h); - if (!(l & (1<<16))) { - printk(KERN_INFO PFX "couldn't enable Enhanced SpeedStep\n"); - return -ENODEV; - } - } - - freq = get_cur_freq(policy->cpu); - - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */ - policy->cur = freq; - - dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur); - - ret = cpufreq_frequency_table_cpuinfo(policy, centrino_model[policy->cpu]->op_points); - if (ret) - return (ret); - - cpufreq_frequency_table_get_attr(centrino_model[policy->cpu]->op_points, policy->cpu); - - return 0; -} - -static int centrino_cpu_exit(struct cpufreq_policy *policy) -{ - unsigned int cpu = policy->cpu; - - if (!centrino_model[cpu]) - return -ENODEV; - - cpufreq_frequency_table_put_attr(cpu); - - centrino_model[cpu] = NULL; - - return 0; -} - -/** - * centrino_verify - verifies a new CPUFreq policy - * @policy: new policy - * - * Limit must be within this model's frequency range at least one - * border included. - */ -static int centrino_verify (struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, centrino_model[policy->cpu]->op_points); -} - -/** - * centrino_setpolicy - set a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * Sets a new CPUFreq policy. - */ -static int centrino_target (struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - unsigned int msr, oldmsr = 0, h = 0, cpu = policy->cpu; - struct cpufreq_freqs freqs; - cpumask_t online_policy_cpus; - cpumask_t saved_mask; - cpumask_t set_mask; - cpumask_t covered_cpus; - int retval = 0; - unsigned int j, k, first_cpu, tmp; - - if (unlikely(centrino_model[cpu] == NULL)) - return -ENODEV; - - if (unlikely(cpufreq_frequency_table_target(policy, - centrino_model[cpu]->op_points, - target_freq, - relation, - &newstate))) { - return -EINVAL; - } - -#ifdef CONFIG_HOTPLUG_CPU - /* cpufreq holds the hotplug lock, so we are safe from here on */ - cpus_and(online_policy_cpus, cpu_online_map, policy->cpus); -#else - online_policy_cpus = policy->cpus; -#endif - - saved_mask = current->cpus_allowed; - first_cpu = 1; - cpus_clear(covered_cpus); - for_each_cpu_mask(j, online_policy_cpus) { - /* - * Support for SMP systems. - * Make sure we are running on CPU that wants to change freq - */ - cpus_clear(set_mask); - if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) - cpus_or(set_mask, set_mask, online_policy_cpus); - else - cpu_set(j, set_mask); - - set_cpus_allowed(current, set_mask); - preempt_disable(); - if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) { - dprintk("couldn't limit to CPUs in this domain\n"); - retval = -EAGAIN; - if (first_cpu) { - /* We haven't started the transition yet. */ - goto migrate_end; - } - preempt_enable(); - break; - } - - msr = centrino_model[cpu]->op_points[newstate].index; - - if (first_cpu) { - rdmsr(MSR_IA32_PERF_CTL, oldmsr, h); - if (msr == (oldmsr & 0xffff)) { - dprintk("no change needed - msr was and needs " - "to be %x\n", oldmsr); - retval = 0; - goto migrate_end; - } - - freqs.old = extract_clock(oldmsr, cpu, 0); - freqs.new = extract_clock(msr, cpu, 0); - - dprintk("target=%dkHz old=%d new=%d msr=%04x\n", - target_freq, freqs.old, freqs.new, msr); - - for_each_cpu_mask(k, online_policy_cpus) { - freqs.cpu = k; - cpufreq_notify_transition(&freqs, - CPUFREQ_PRECHANGE); - } - - first_cpu = 0; - /* all but 16 LSB are reserved, treat them with care */ - oldmsr &= ~0xffff; - msr &= 0xffff; - oldmsr |= msr; - } - - wrmsr(MSR_IA32_PERF_CTL, oldmsr, h); - if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) { - preempt_enable(); - break; - } - - cpu_set(j, covered_cpus); - preempt_enable(); - } - - for_each_cpu_mask(k, online_policy_cpus) { - freqs.cpu = k; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - - if (unlikely(retval)) { - /* - * We have failed halfway through the frequency change. - * We have sent callbacks to policy->cpus and - * MSRs have already been written on coverd_cpus. - * Best effort undo.. - */ - - if (!cpus_empty(covered_cpus)) { - for_each_cpu_mask(j, covered_cpus) { - set_cpus_allowed(current, cpumask_of_cpu(j)); - wrmsr(MSR_IA32_PERF_CTL, oldmsr, h); - } - } - - tmp = freqs.new; - freqs.new = freqs.old; - freqs.old = tmp; - for_each_cpu_mask(j, online_policy_cpus) { - freqs.cpu = j; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - } - set_cpus_allowed(current, saved_mask); - return 0; - -migrate_end: - preempt_enable(); - set_cpus_allowed(current, saved_mask); - return 0; -} - -static struct freq_attr* centrino_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver centrino_driver = { - .name = "centrino", /* should be speedstep-centrino, - but there's a 16 char limit */ - .init = centrino_cpu_init, - .exit = centrino_cpu_exit, - .verify = centrino_verify, - .target = centrino_target, - .get = get_cur_freq, - .attr = centrino_attr, - .owner = THIS_MODULE, -}; - - -/** - * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver - * - * Initializes the Enhanced SpeedStep support. Returns -ENODEV on - * unsupported devices, -ENOENT if there's no voltage table for this - * particular CPU model, -EINVAL on problems during initiatization, - * and zero on success. - * - * This is quite picky. Not only does the CPU have to advertise the - * "est" flag in the cpuid capability flags, we look for a specific - * CPU model and stepping, and we need to have the exact model name in - * our voltage tables. That is, be paranoid about not releasing - * someone's valuable magic smoke. - */ -static int __init centrino_init(void) -{ - struct cpuinfo_x86 *cpu = cpu_data; - - if (!cpu_has(cpu, X86_FEATURE_EST)) - return -ENODEV; - - return cpufreq_register_driver(¢rino_driver); -} - -static void __exit centrino_exit(void) -{ - cpufreq_unregister_driver(¢rino_driver); -} - -MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>"); -MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors."); -MODULE_LICENSE ("GPL"); - -late_initcall(centrino_init); -module_exit(centrino_exit); diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c deleted file mode 100644 index a5b2346faf1f..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c +++ /dev/null @@ -1,440 +0,0 @@ -/* - * (C) 2001 Dave Jones, Arjan van de ven. - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * - * Licensed under the terms of the GNU GPL License version 2. - * Based upon reverse engineered information, and on Intel documentation - * for chipsets ICH2-M and ICH3-M. - * - * Many thanks to Ducrot Bruno for finding and fixing the last - * "missing link" for ICH2-M/ICH3-M support, and to Thomas Winkler - * for extensive testing. - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - - -/********************************************************************* - * SPEEDSTEP - DEFINITIONS * - *********************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/sched.h> - -#include "speedstep-lib.h" - - -/* speedstep_chipset: - * It is necessary to know which chipset is used. As accesses to - * this device occur at various places in this module, we need a - * static struct pci_dev * pointing to that device. - */ -static struct pci_dev *speedstep_chipset_dev; - - -/* speedstep_processor - */ -static unsigned int speedstep_processor = 0; - -static u32 pmbase; - -/* - * There are only two frequency states for each processor. Values - * are in kHz for the time being. - */ -static struct cpufreq_frequency_table speedstep_freqs[] = { - {SPEEDSTEP_HIGH, 0}, - {SPEEDSTEP_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-ich", msg) - - -/** - * speedstep_find_register - read the PMBASE address - * - * Returns: -ENODEV if no register could be found - */ -static int speedstep_find_register (void) -{ - if (!speedstep_chipset_dev) - return -ENODEV; - - /* get PMBASE */ - pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase); - if (!(pmbase & 0x01)) { - printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); - return -ENODEV; - } - - pmbase &= 0xFFFFFFFE; - if (!pmbase) { - printk(KERN_ERR "speedstep-ich: could not find speedstep register\n"); - return -ENODEV; - } - - dprintk("pmbase is 0x%x\n", pmbase); - return 0; -} - -/** - * speedstep_set_state - set the SpeedStep state - * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) - * - * Tries to change the SpeedStep state. - */ -static void speedstep_set_state (unsigned int state) -{ - u8 pm2_blk; - u8 value; - unsigned long flags; - - if (state > 0x1) - return; - - /* Disable IRQs */ - local_irq_save(flags); - - /* read state */ - value = inb(pmbase + 0x50); - - dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); - - /* write new state */ - value &= 0xFE; - value |= state; - - dprintk("writing 0x%x to pmbase 0x%x + 0x50\n", value, pmbase); - - /* Disable bus master arbitration */ - pm2_blk = inb(pmbase + 0x20); - pm2_blk |= 0x01; - outb(pm2_blk, (pmbase + 0x20)); - - /* Actual transition */ - outb(value, (pmbase + 0x50)); - - /* Restore bus master arbitration */ - pm2_blk &= 0xfe; - outb(pm2_blk, (pmbase + 0x20)); - - /* check if transition was successful */ - value = inb(pmbase + 0x50); - - /* Enable IRQs */ - local_irq_restore(flags); - - dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); - - if (state == (value & 0x1)) { - dprintk("change to %u MHz succeeded\n", (speedstep_get_processor_frequency(speedstep_processor) / 1000)); - } else { - printk (KERN_ERR "cpufreq: change failed - I/O error\n"); - } - - return; -} - - -/** - * speedstep_activate - activate SpeedStep control in the chipset - * - * Tries to activate the SpeedStep status and control registers. - * Returns -EINVAL on an unsupported chipset, and zero on success. - */ -static int speedstep_activate (void) -{ - u16 value = 0; - - if (!speedstep_chipset_dev) - return -EINVAL; - - pci_read_config_word(speedstep_chipset_dev, 0x00A0, &value); - if (!(value & 0x08)) { - value |= 0x08; - dprintk("activating SpeedStep (TM) registers\n"); - pci_write_config_word(speedstep_chipset_dev, 0x00A0, value); - } - - return 0; -} - - -/** - * speedstep_detect_chipset - detect the Southbridge which contains SpeedStep logic - * - * Detects ICH2-M, ICH3-M and ICH4-M so far. The pci_dev points to - * the LPC bridge / PM module which contains all power-management - * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected - * chipset, or zero on failure. - */ -static unsigned int speedstep_detect_chipset (void) -{ - speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82801DB_12, - PCI_ANY_ID, - PCI_ANY_ID, - NULL); - if (speedstep_chipset_dev) - return 4; /* 4-M */ - - speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82801CA_12, - PCI_ANY_ID, - PCI_ANY_ID, - NULL); - if (speedstep_chipset_dev) - return 3; /* 3-M */ - - - speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82801BA_10, - PCI_ANY_ID, - PCI_ANY_ID, - NULL); - if (speedstep_chipset_dev) { - /* speedstep.c causes lockups on Dell Inspirons 8000 and - * 8100 which use a pretty old revision of the 82815 - * host brige. Abort on these systems. - */ - static struct pci_dev *hostbridge; - - hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_82815_MC, - PCI_ANY_ID, - PCI_ANY_ID, - NULL); - - if (!hostbridge) - return 2; /* 2-M */ - - if (hostbridge->revision < 5) { - dprintk("hostbridge does not support speedstep\n"); - speedstep_chipset_dev = NULL; - pci_dev_put(hostbridge); - return 0; - } - - pci_dev_put(hostbridge); - return 2; /* 2-M */ - } - - return 0; -} - -static unsigned int _speedstep_get(cpumask_t cpus) -{ - unsigned int speed; - cpumask_t cpus_allowed; - - cpus_allowed = current->cpus_allowed; - set_cpus_allowed(current, cpus); - speed = speedstep_get_processor_frequency(speedstep_processor); - set_cpus_allowed(current, cpus_allowed); - dprintk("detected %u kHz as current frequency\n", speed); - return speed; -} - -static unsigned int speedstep_get(unsigned int cpu) -{ - return _speedstep_get(cpumask_of_cpu(cpu)); -} - -/** - * speedstep_target - set a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * Sets a new CPUFreq policy. - */ -static int speedstep_target (struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - struct cpufreq_freqs freqs; - cpumask_t cpus_allowed; - int i; - - if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate)) - return -EINVAL; - - freqs.old = _speedstep_get(policy->cpus); - freqs.new = speedstep_freqs[newstate].frequency; - freqs.cpu = policy->cpu; - - dprintk("transiting from %u to %u kHz\n", freqs.old, freqs.new); - - /* no transition necessary */ - if (freqs.old == freqs.new) - return 0; - - cpus_allowed = current->cpus_allowed; - - for_each_cpu_mask(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - } - - /* switch to physical CPU where state is to be changed */ - set_cpus_allowed(current, policy->cpus); - - speedstep_set_state(newstate); - - /* allow to be run on all CPUs */ - set_cpus_allowed(current, cpus_allowed); - - for_each_cpu_mask(i, policy->cpus) { - freqs.cpu = i; - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - - return 0; -} - - -/** - * speedstep_verify - verifies a new CPUFreq policy - * @policy: new policy - * - * Limit must be within speedstep_low_freq and speedstep_high_freq, with - * at least one border included. - */ -static int speedstep_verify (struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); -} - - -static int speedstep_cpu_init(struct cpufreq_policy *policy) -{ - int result = 0; - unsigned int speed; - cpumask_t cpus_allowed; - - /* only run on CPU to be set, or on its sibling */ -#ifdef CONFIG_SMP - policy->cpus = cpu_sibling_map[policy->cpu]; -#endif - - cpus_allowed = current->cpus_allowed; - set_cpus_allowed(current, policy->cpus); - - /* detect low and high frequency and transition latency */ - result = speedstep_get_freqs(speedstep_processor, - &speedstep_freqs[SPEEDSTEP_LOW].frequency, - &speedstep_freqs[SPEEDSTEP_HIGH].frequency, - &policy->cpuinfo.transition_latency, - &speedstep_set_state); - set_cpus_allowed(current, cpus_allowed); - if (result) - return result; - - /* get current speed setting */ - speed = _speedstep_get(policy->cpus); - if (!speed) - return -EIO; - - dprintk("currently at %s speed setting - %i MHz\n", - (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high", - (speed / 1000)); - - /* cpuinfo and default policy values */ - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->cur = speed; - - result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); - if (result) - return (result); - - cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); - - return 0; -} - - -static int speedstep_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct freq_attr* speedstep_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - -static struct cpufreq_driver speedstep_driver = { - .name = "speedstep-ich", - .verify = speedstep_verify, - .target = speedstep_target, - .init = speedstep_cpu_init, - .exit = speedstep_cpu_exit, - .get = speedstep_get, - .owner = THIS_MODULE, - .attr = speedstep_attr, -}; - - -/** - * speedstep_init - initializes the SpeedStep CPUFreq driver - * - * Initializes the SpeedStep support. Returns -ENODEV on unsupported - * devices, -EINVAL on problems during initiatization, and zero on - * success. - */ -static int __init speedstep_init(void) -{ - /* detect processor */ - speedstep_processor = speedstep_detect_processor(); - if (!speedstep_processor) { - dprintk("Intel(R) SpeedStep(TM) capable processor not found\n"); - return -ENODEV; - } - - /* detect chipset */ - if (!speedstep_detect_chipset()) { - dprintk("Intel(R) SpeedStep(TM) for this chipset not (yet) available.\n"); - return -ENODEV; - } - - /* activate speedstep support */ - if (speedstep_activate()) { - pci_dev_put(speedstep_chipset_dev); - return -EINVAL; - } - - if (speedstep_find_register()) - return -ENODEV; - - return cpufreq_register_driver(&speedstep_driver); -} - - -/** - * speedstep_exit - unregisters SpeedStep support - * - * Unregisters SpeedStep support. - */ -static void __exit speedstep_exit(void) -{ - pci_dev_put(speedstep_chipset_dev); - cpufreq_unregister_driver(&speedstep_driver); -} - - -MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges."); -MODULE_LICENSE ("GPL"); - -module_init(speedstep_init); -module_exit(speedstep_exit); diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c deleted file mode 100644 index b1acc8ce3167..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.c +++ /dev/null @@ -1,444 +0,0 @@ -/* - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * - * Licensed under the terms of the GNU GPL License version 2. - * - * Library for common functions for Intel SpeedStep v.1 and v.2 support - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> - -#include <asm/msr.h> -#include "speedstep-lib.h" - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-lib", msg) - -#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK -static int relaxed_check = 0; -#else -#define relaxed_check 0 -#endif - -/********************************************************************* - * GET PROCESSOR CORE SPEED IN KHZ * - *********************************************************************/ - -static unsigned int pentium3_get_frequency (unsigned int processor) -{ - /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ - struct { - unsigned int ratio; /* Frequency Multiplier (x10) */ - u8 bitmap; /* power on configuration bits - [27, 25:22] (in MSR 0x2a) */ - } msr_decode_mult [] = { - { 30, 0x01 }, - { 35, 0x05 }, - { 40, 0x02 }, - { 45, 0x06 }, - { 50, 0x00 }, - { 55, 0x04 }, - { 60, 0x0b }, - { 65, 0x0f }, - { 70, 0x09 }, - { 75, 0x0d }, - { 80, 0x0a }, - { 85, 0x26 }, - { 90, 0x20 }, - { 100, 0x2b }, - { 0, 0xff } /* error or unknown value */ - }; - - /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */ - struct { - unsigned int value; /* Front Side Bus speed in MHz */ - u8 bitmap; /* power on configuration bits [18: 19] - (in MSR 0x2a) */ - } msr_decode_fsb [] = { - { 66, 0x0 }, - { 100, 0x2 }, - { 133, 0x1 }, - { 0, 0xff} - }; - - u32 msr_lo, msr_tmp; - int i = 0, j = 0; - - /* read MSR 0x2a - we only need the low 32 bits */ - rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); - dprintk("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); - msr_tmp = msr_lo; - - /* decode the FSB */ - msr_tmp &= 0x00c0000; - msr_tmp >>= 18; - while (msr_tmp != msr_decode_fsb[i].bitmap) { - if (msr_decode_fsb[i].bitmap == 0xff) - return 0; - i++; - } - - /* decode the multiplier */ - if (processor == SPEEDSTEP_PROCESSOR_PIII_C_EARLY) { - dprintk("workaround for early PIIIs\n"); - msr_lo &= 0x03c00000; - } else - msr_lo &= 0x0bc00000; - msr_lo >>= 22; - while (msr_lo != msr_decode_mult[j].bitmap) { - if (msr_decode_mult[j].bitmap == 0xff) - return 0; - j++; - } - - dprintk("speed is %u\n", (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100)); - - return (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100); -} - - -static unsigned int pentiumM_get_frequency(void) -{ - u32 msr_lo, msr_tmp; - - rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); - dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); - - /* see table B-2 of 24547212.pdf */ - if (msr_lo & 0x00040000) { - printk(KERN_DEBUG "speedstep-lib: PM - invalid FSB: 0x%x 0x%x\n", msr_lo, msr_tmp); - return 0; - } - - msr_tmp = (msr_lo >> 22) & 0x1f; - dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * 100 * 1000)); - - return (msr_tmp * 100 * 1000); -} - -static unsigned int pentium_core_get_frequency(void) -{ - u32 fsb = 0; - u32 msr_lo, msr_tmp; - - rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp); - /* see table B-2 of 25366920.pdf */ - switch (msr_lo & 0x07) { - case 5: - fsb = 100000; - break; - case 1: - fsb = 133333; - break; - case 3: - fsb = 166667; - break; - default: - printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value"); - } - - rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); - dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); - - msr_tmp = (msr_lo >> 22) & 0x1f; - dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * fsb)); - - return (msr_tmp * fsb); -} - - -static unsigned int pentium4_get_frequency(void) -{ - struct cpuinfo_x86 *c = &boot_cpu_data; - u32 msr_lo, msr_hi, mult; - unsigned int fsb = 0; - - rdmsr(0x2c, msr_lo, msr_hi); - - dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi); - - /* decode the FSB: see IA-32 Intel (C) Architecture Software - * Developer's Manual, Volume 3: System Prgramming Guide, - * revision #12 in Table B-1: MSRs in the Pentium 4 and - * Intel Xeon Processors, on page B-4 and B-5. - */ - if (c->x86_model < 2) - fsb = 100 * 1000; - else { - u8 fsb_code = (msr_lo >> 16) & 0x7; - switch (fsb_code) { - case 0: - fsb = 100 * 1000; - break; - case 1: - fsb = 13333 * 10; - break; - case 2: - fsb = 200 * 1000; - break; - } - } - - if (!fsb) - printk(KERN_DEBUG "speedstep-lib: couldn't detect FSB speed. Please send an e-mail to <linux@brodo.de>\n"); - - /* Multiplier. */ - if (c->x86_model < 2) - mult = msr_lo >> 27; - else - mult = msr_lo >> 24; - - dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", fsb, mult, (fsb * mult)); - - return (fsb * mult); -} - - -unsigned int speedstep_get_processor_frequency(unsigned int processor) -{ - switch (processor) { - case SPEEDSTEP_PROCESSOR_PCORE: - return pentium_core_get_frequency(); - case SPEEDSTEP_PROCESSOR_PM: - return pentiumM_get_frequency(); - case SPEEDSTEP_PROCESSOR_P4D: - case SPEEDSTEP_PROCESSOR_P4M: - return pentium4_get_frequency(); - case SPEEDSTEP_PROCESSOR_PIII_T: - case SPEEDSTEP_PROCESSOR_PIII_C: - case SPEEDSTEP_PROCESSOR_PIII_C_EARLY: - return pentium3_get_frequency(processor); - default: - return 0; - }; - return 0; -} -EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency); - - -/********************************************************************* - * DETECT SPEEDSTEP-CAPABLE PROCESSOR * - *********************************************************************/ - -unsigned int speedstep_detect_processor (void) -{ - struct cpuinfo_x86 *c = cpu_data; - u32 ebx, msr_lo, msr_hi; - - dprintk("x86: %x, model: %x\n", c->x86, c->x86_model); - - if ((c->x86_vendor != X86_VENDOR_INTEL) || - ((c->x86 != 6) && (c->x86 != 0xF))) - return 0; - - if (c->x86 == 0xF) { - /* Intel Mobile Pentium 4-M - * or Intel Mobile Pentium 4 with 533 MHz FSB */ - if (c->x86_model != 2) - return 0; - - ebx = cpuid_ebx(0x00000001); - ebx &= 0x000000FF; - - dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask); - - switch (c->x86_mask) { - case 4: - /* - * B-stepping [M-P4-M] - * sample has ebx = 0x0f, production has 0x0e. - */ - if ((ebx == 0x0e) || (ebx == 0x0f)) - return SPEEDSTEP_PROCESSOR_P4M; - break; - case 7: - /* - * C-stepping [M-P4-M] - * needs to have ebx=0x0e, else it's a celeron: - * cf. 25130917.pdf / page 7, footnote 5 even - * though 25072120.pdf / page 7 doesn't say - * samples are only of B-stepping... - */ - if (ebx == 0x0e) - return SPEEDSTEP_PROCESSOR_P4M; - break; - case 9: - /* - * D-stepping [M-P4-M or M-P4/533] - * - * this is totally strange: CPUID 0x0F29 is - * used by M-P4-M, M-P4/533 and(!) Celeron CPUs. - * The latter need to be sorted out as they don't - * support speedstep. - * Celerons with CPUID 0x0F29 may have either - * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything - * specific. - * M-P4-Ms may have either ebx=0xe or 0xf [see above] - * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf] - * also, M-P4M HTs have ebx=0x8, too - * For now, they are distinguished by the model_id string - */ - if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL)) - return SPEEDSTEP_PROCESSOR_P4M; - break; - default: - break; - } - return 0; - } - - switch (c->x86_model) { - case 0x0B: /* Intel PIII [Tualatin] */ - /* cpuid_ebx(1) is 0x04 for desktop PIII, 0x06 for mobile PIII-M */ - ebx = cpuid_ebx(0x00000001); - dprintk("ebx is %x\n", ebx); - - ebx &= 0x000000FF; - - if (ebx != 0x06) - return 0; - - /* So far all PIII-M processors support SpeedStep. See - * Intel's 24540640.pdf of June 2003 - */ - return SPEEDSTEP_PROCESSOR_PIII_T; - - case 0x08: /* Intel PIII [Coppermine] */ - - /* all mobile PIII Coppermines have FSB 100 MHz - * ==> sort out a few desktop PIIIs. */ - rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi); - dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", msr_lo, msr_hi); - msr_lo &= 0x00c0000; - if (msr_lo != 0x0080000) - return 0; - - /* - * If the processor is a mobile version, - * platform ID has bit 50 set - * it has SpeedStep technology if either - * bit 56 or 57 is set - */ - rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi); - dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", msr_lo, msr_hi); - if ((msr_hi & (1<<18)) && (relaxed_check ? 1 : (msr_hi & (3<<24)))) { - if (c->x86_mask == 0x01) { - dprintk("early PIII version\n"); - return SPEEDSTEP_PROCESSOR_PIII_C_EARLY; - } else - return SPEEDSTEP_PROCESSOR_PIII_C; - } - - default: - return 0; - } -} -EXPORT_SYMBOL_GPL(speedstep_detect_processor); - - -/********************************************************************* - * DETECT SPEEDSTEP SPEEDS * - *********************************************************************/ - -unsigned int speedstep_get_freqs(unsigned int processor, - unsigned int *low_speed, - unsigned int *high_speed, - unsigned int *transition_latency, - void (*set_state) (unsigned int state)) -{ - unsigned int prev_speed; - unsigned int ret = 0; - unsigned long flags; - struct timeval tv1, tv2; - - if ((!processor) || (!low_speed) || (!high_speed) || (!set_state)) - return -EINVAL; - - dprintk("trying to determine both speeds\n"); - - /* get current speed */ - prev_speed = speedstep_get_processor_frequency(processor); - if (!prev_speed) - return -EIO; - - dprintk("previous speed is %u\n", prev_speed); - - local_irq_save(flags); - - /* switch to low state */ - set_state(SPEEDSTEP_LOW); - *low_speed = speedstep_get_processor_frequency(processor); - if (!*low_speed) { - ret = -EIO; - goto out; - } - - dprintk("low speed is %u\n", *low_speed); - - /* start latency measurement */ - if (transition_latency) - do_gettimeofday(&tv1); - - /* switch to high state */ - set_state(SPEEDSTEP_HIGH); - - /* end latency measurement */ - if (transition_latency) - do_gettimeofday(&tv2); - - *high_speed = speedstep_get_processor_frequency(processor); - if (!*high_speed) { - ret = -EIO; - goto out; - } - - dprintk("high speed is %u\n", *high_speed); - - if (*low_speed == *high_speed) { - ret = -ENODEV; - goto out; - } - - /* switch to previous state, if necessary */ - if (*high_speed != prev_speed) - set_state(SPEEDSTEP_LOW); - - if (transition_latency) { - *transition_latency = (tv2.tv_sec - tv1.tv_sec) * USEC_PER_SEC + - tv2.tv_usec - tv1.tv_usec; - dprintk("transition latency is %u uSec\n", *transition_latency); - - /* convert uSec to nSec and add 20% for safety reasons */ - *transition_latency *= 1200; - - /* check if the latency measurement is too high or too low - * and set it to a safe value (500uSec) in that case - */ - if (*transition_latency > 10000000 || *transition_latency < 50000) { - printk (KERN_WARNING "speedstep: frequency transition measured seems out of " - "range (%u nSec), falling back to a safe one of %u nSec.\n", - *transition_latency, 500000); - *transition_latency = 500000; - } - } - -out: - local_irq_restore(flags); - return (ret); -} -EXPORT_SYMBOL_GPL(speedstep_get_freqs); - -#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK -module_param(relaxed_check, int, 0444); -MODULE_PARM_DESC(relaxed_check, "Don't do all checks for speedstep capability."); -#endif - -MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION ("Library for Intel SpeedStep 1 or 2 cpufreq drivers."); -MODULE_LICENSE ("GPL"); diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h b/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h deleted file mode 100644 index b11bcc608cac..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-lib.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> - * - * Licensed under the terms of the GNU GPL License version 2. - * - * Library for common functions for Intel SpeedStep v.1 and v.2 support - * - * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* - */ - - - -/* processors */ - -#define SPEEDSTEP_PROCESSOR_PIII_C_EARLY 0x00000001 /* Coppermine core */ -#define SPEEDSTEP_PROCESSOR_PIII_C 0x00000002 /* Coppermine core */ -#define SPEEDSTEP_PROCESSOR_PIII_T 0x00000003 /* Tualatin core */ -#define SPEEDSTEP_PROCESSOR_P4M 0x00000004 /* P4-M */ - -/* the following processors are not speedstep-capable and are not auto-detected - * in speedstep_detect_processor(). However, their speed can be detected using - * the speedstep_get_processor_frequency() call. */ -#define SPEEDSTEP_PROCESSOR_PM 0xFFFFFF03 /* Pentium M */ -#define SPEEDSTEP_PROCESSOR_P4D 0xFFFFFF04 /* desktop P4 */ -#define SPEEDSTEP_PROCESSOR_PCORE 0xFFFFFF05 /* Core */ - -/* speedstep states -- only two of them */ - -#define SPEEDSTEP_HIGH 0x00000000 -#define SPEEDSTEP_LOW 0x00000001 - - -/* detect a speedstep-capable processor */ -extern unsigned int speedstep_detect_processor (void); - -/* detect the current speed (in khz) of the processor */ -extern unsigned int speedstep_get_processor_frequency(unsigned int processor); - - -/* detect the low and high speeds of the processor. The callback - * set_state"'s first argument is either SPEEDSTEP_HIGH or - * SPEEDSTEP_LOW; the second argument is zero so that no - * cpufreq_notify_transition calls are initiated. - */ -extern unsigned int speedstep_get_freqs(unsigned int processor, - unsigned int *low_speed, - unsigned int *high_speed, - unsigned int *transition_latency, - void (*set_state) (unsigned int state)); diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c b/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c deleted file mode 100644 index e1c509aa3054..000000000000 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-smi.c +++ /dev/null @@ -1,424 +0,0 @@ -/* - * Intel SpeedStep SMI driver. - * - * (C) 2003 Hiroshi Miura <miura@da-cha.org> - * - * Licensed under the terms of the GNU GPL License version 2. - * - */ - - -/********************************************************************* - * SPEEDSTEP - DEFINITIONS * - *********************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <asm/ist.h> -#include <asm/io.h> - -#include "speedstep-lib.h" - -/* speedstep system management interface port/command. - * - * These parameters are got from IST-SMI BIOS call. - * If user gives it, these are used. - * - */ -static int smi_port = 0; -static int smi_cmd = 0; -static unsigned int smi_sig = 0; - -/* info about the processor */ -static unsigned int speedstep_processor = 0; - -/* - * There are only two frequency states for each processor. Values - * are in kHz for the time being. - */ -static struct cpufreq_frequency_table speedstep_freqs[] = { - {SPEEDSTEP_HIGH, 0}, - {SPEEDSTEP_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -#define GET_SPEEDSTEP_OWNER 0 -#define GET_SPEEDSTEP_STATE 1 -#define SET_SPEEDSTEP_STATE 2 -#define GET_SPEEDSTEP_FREQS 4 - -/* how often shall the SMI call be tried if it failed, e.g. because - * of DMA activity going on? */ -#define SMI_TRIES 5 - -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-smi", msg) - -/** - * speedstep_smi_ownership - */ -static int speedstep_smi_ownership (void) -{ - u32 command, result, magic; - u32 function = GET_SPEEDSTEP_OWNER; - unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation"; - - command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - magic = virt_to_phys(magic_data); - - dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port); - - __asm__ __volatile__( - "out %%al, (%%dx)\n" - : "=D" (result) - : "a" (command), "b" (function), "c" (0), "d" (smi_port), - "D" (0), "S" (magic) - : "memory" - ); - - dprintk("result is %x\n", result); - - return result; -} - -/** - * speedstep_smi_get_freqs - get SpeedStep preferred & current freq. - * @low: the low frequency value is placed here - * @high: the high frequency value is placed here - * - * Only available on later SpeedStep-enabled systems, returns false results or - * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing - * shows that the latter occurs if !(ist_info.event & 0xFFFF). - */ -static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) -{ - u32 command, result = 0, edi, high_mhz, low_mhz; - u32 state=0; - u32 function = GET_SPEEDSTEP_FREQS; - - if (!(ist_info.event & 0xFFFF)) { - dprintk("bug #1422 -- can't read freqs from BIOS\n"); - return -ENODEV; - } - - command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - - dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port); - - __asm__ __volatile__("movl $0, %%edi\n" - "out %%al, (%%dx)\n" - : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi) - : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0) - ); - - dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz); - - /* abort if results are obviously incorrect... */ - if ((high_mhz + low_mhz) < 600) - return -EINVAL; - - *high = high_mhz * 1000; - *low = low_mhz * 1000; - - return result; -} - -/** - * speedstep_get_state - set the SpeedStep state - * @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) - * - */ -static int speedstep_get_state (void) -{ - u32 function=GET_SPEEDSTEP_STATE; - u32 result, state, edi, command; - - command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - - dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port); - - __asm__ __volatile__("movl $0, %%edi\n" - "out %%al, (%%dx)\n" - : "=a" (result), "=b" (state), "=D" (edi) - : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0) - ); - - dprintk("state is %x, result is %x\n", state, result); - - return (state & 1); -} - - -/** - * speedstep_set_state - set the SpeedStep state - * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) - * - */ -static void speedstep_set_state (unsigned int state) -{ - unsigned int result = 0, command, new_state; - unsigned long flags; - unsigned int function=SET_SPEEDSTEP_STATE; - unsigned int retry = 0; - - if (state > 0x1) - return; - - /* Disable IRQs */ - local_irq_save(flags); - - command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - - dprintk("trying to set frequency to state %u with command %x at port %x\n", state, command, smi_port); - - do { - if (retry) { - dprintk("retry %u, previous result %u, waiting...\n", retry, result); - mdelay(retry * 50); - } - retry++; - __asm__ __volatile__( - "movl $0, %%edi\n" - "out %%al, (%%dx)\n" - : "=b" (new_state), "=D" (result) - : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0) - ); - } while ((new_state != state) && (retry <= SMI_TRIES)); - - /* enable IRQs */ - local_irq_restore(flags); - - if (new_state == state) { - dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result); - } else { - printk(KERN_ERR "cpufreq: change failed with new_state %u and result %u\n", new_state, result); - } - - return; -} - - -/** - * speedstep_target - set a new CPUFreq policy - * @policy: new policy - * @target_freq: new freq - * @relation: - * - * Sets a new CPUFreq policy/freq. - */ -static int speedstep_target (struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned int newstate = 0; - struct cpufreq_freqs freqs; - - if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate)) - return -EINVAL; - - freqs.old = speedstep_freqs[speedstep_get_state()].frequency; - freqs.new = speedstep_freqs[newstate].frequency; - freqs.cpu = 0; /* speedstep.c is UP only driver */ - - if (freqs.old == freqs.new) - return 0; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - speedstep_set_state(newstate); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - - -/** - * speedstep_verify - verifies a new CPUFreq policy - * @policy: new policy - * - * Limit must be within speedstep_low_freq and speedstep_high_freq, with - * at least one border included. - */ -static int speedstep_verify (struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); -} - - -static int speedstep_cpu_init(struct cpufreq_policy *policy) -{ - int result; - unsigned int speed,state; - - /* capability check */ - if (policy->cpu != 0) - return -ENODEV; - - result = speedstep_smi_ownership(); - if (result) { - dprintk("fails in aquiring ownership of a SMI interface.\n"); - return -EINVAL; - } - - /* detect low and high frequency */ - result = speedstep_smi_get_freqs(&speedstep_freqs[SPEEDSTEP_LOW].frequency, - &speedstep_freqs[SPEEDSTEP_HIGH].frequency); - if (result) { - /* fall back to speedstep_lib.c dection mechanism: try both states out */ - dprintk("could not detect low and high frequencies by SMI call.\n"); - result = speedstep_get_freqs(speedstep_processor, - &speedstep_freqs[SPEEDSTEP_LOW].frequency, - &speedstep_freqs[SPEEDSTEP_HIGH].frequency, - NULL, - &speedstep_set_state); - - if (result) { - dprintk("could not detect two different speeds -- aborting.\n"); - return result; - } else - dprintk("workaround worked.\n"); - } - - /* get current speed setting */ - state = speedstep_get_state(); - speed = speedstep_freqs[state].frequency; - - dprintk("currently at %s speed setting - %i MHz\n", - (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high", - (speed / 1000)); - - /* cpuinfo and default policy values */ - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = speed; - - result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); - if (result) - return (result); - - cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); - - return 0; -} - -static int speedstep_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static unsigned int speedstep_get(unsigned int cpu) -{ - if (cpu) - return -ENODEV; - return speedstep_get_processor_frequency(speedstep_processor); -} - - -static int speedstep_resume(struct cpufreq_policy *policy) -{ - int result = speedstep_smi_ownership(); - - if (result) - dprintk("fails in re-aquiring ownership of a SMI interface.\n"); - - return result; -} - -static struct freq_attr* speedstep_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver speedstep_driver = { - .name = "speedstep-smi", - .verify = speedstep_verify, - .target = speedstep_target, - .init = speedstep_cpu_init, - .exit = speedstep_cpu_exit, - .get = speedstep_get, - .resume = speedstep_resume, - .owner = THIS_MODULE, - .attr = speedstep_attr, -}; - -/** - * speedstep_init - initializes the SpeedStep CPUFreq driver - * - * Initializes the SpeedStep support. Returns -ENODEV on unsupported - * BIOS, -EINVAL on problems during initiatization, and zero on - * success. - */ -static int __init speedstep_init(void) -{ - speedstep_processor = speedstep_detect_processor(); - - switch (speedstep_processor) { - case SPEEDSTEP_PROCESSOR_PIII_T: - case SPEEDSTEP_PROCESSOR_PIII_C: - case SPEEDSTEP_PROCESSOR_PIII_C_EARLY: - break; - default: - speedstep_processor = 0; - } - - if (!speedstep_processor) { - dprintk ("No supported Intel CPU detected.\n"); - return -ENODEV; - } - - dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n", - ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level); - - /* Error if no IST-SMI BIOS or no PARM - sig= 'ISGE' aka 'Intel Speedstep Gate E' */ - if ((ist_info.signature != 0x47534943) && ( - (smi_port == 0) || (smi_cmd == 0))) - return -ENODEV; - - if (smi_sig == 1) - smi_sig = 0x47534943; - else - smi_sig = ist_info.signature; - - /* setup smi_port from MODLULE_PARM or BIOS */ - if ((smi_port > 0xff) || (smi_port < 0)) - return -EINVAL; - else if (smi_port == 0) - smi_port = ist_info.command & 0xff; - - if ((smi_cmd > 0xff) || (smi_cmd < 0)) - return -EINVAL; - else if (smi_cmd == 0) - smi_cmd = (ist_info.command >> 16) & 0xff; - - return cpufreq_register_driver(&speedstep_driver); -} - - -/** - * speedstep_exit - unregisters SpeedStep support - * - * Unregisters SpeedStep support. - */ -static void __exit speedstep_exit(void) -{ - cpufreq_unregister_driver(&speedstep_driver); -} - -module_param(smi_port, int, 0444); -module_param(smi_cmd, int, 0444); -module_param(smi_sig, uint, 0444); - -MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value -- Intel's default setting is 0xb2"); -MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value -- Intel's default setting is 0x82"); -MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the SMI interface."); - -MODULE_AUTHOR ("Hiroshi Miura"); -MODULE_DESCRIPTION ("Speedstep driver for IST applet SMI interface."); -MODULE_LICENSE ("GPL"); - -module_init(speedstep_init); -module_exit(speedstep_exit); |