diff options
Diffstat (limited to 'arch/m68k')
-rw-r--r-- | arch/m68k/mac/via.c | 141 |
1 files changed, 80 insertions, 61 deletions
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index 0c1cc45c570d..83a3bb0c0325 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -64,7 +64,19 @@ static int gIER,gIFR,gBufA,gBufB; #define MAC_CLOCK_LOW (MAC_CLOCK_TICK&0xFF) #define MAC_CLOCK_HIGH (MAC_CLOCK_TICK>>8) -static int nubus_active; +/* To disable a NuBus slot on Quadras we make the slot IRQ lines outputs, set + * high. On RBV we just use the slot interrupt enable register. On Macs with + * genuine VIA chips we must use nubus_disabled to keep track of disabled slot + * interrupts. When any slot IRQ is disabled we mask the (edge triggered) CA1 + * or "SLOTS" interrupt. When no slot is disabled, we unmask the CA1 interrupt. + * So, on genuine VIAs, having more than one NuBus IRQ can mean trouble, + * because closing one of those drivers can mask all of the NuBus interrupts. + * Also, since we can't mask the unregistered slot IRQs on genuine VIAs, it's + * possible to get interrupts from cards that MacOS or the ROM has configured + * but we have not. FWIW, "Designing Cards and Drivers for Macintosh II and + * Macintosh SE", page 9-8, says, a slot IRQ with no driver would crash MacOS. + */ +static u8 nubus_disabled; void via_debug_dump(void); irqreturn_t via1_irq(int, void *); @@ -383,9 +395,6 @@ int via_get_cache_disable(void) void __init via_nubus_init(void) { - /* don't set nubus_active = 0 here, it kills the Baboon */ - /* interrupt that we've already registered. */ - /* unlock nubus transactions */ if ((macintosh_config->adb_type != MAC_ADB_PB1) && @@ -399,28 +408,35 @@ void __init via_nubus_init(void) via2[gBufB] |= 0x02; } - /* disable nubus slot interrupts. */ - if (rbv_present) { + /* Disable all the slot interrupts (where possible). */ + + switch (macintosh_config->via_type) { + case MAC_VIA_II: + /* Just make the port A lines inputs. */ + switch(macintosh_config->ident) { + case MAC_MODEL_II: + case MAC_MODEL_IIX: + case MAC_MODEL_IICX: + case MAC_MODEL_SE30: + /* The top two bits are RAM size outputs. */ + via2[vDirA] &= 0xC0; + break; + default: + via2[vDirA] &= 0x80; + } + break; + case MAC_VIA_IIci: + /* RBV. Disable all the slot interrupts. SIER works like IER. */ via2[rSIER] = 0x7F; - via2[rSIER] = nubus_active | 0x80; - } else { - /* These are ADB bits on PMU */ + break; + case MAC_VIA_QUADRA: + /* Disable the inactive slot interrupts by making those lines outputs. */ if ((macintosh_config->adb_type != MAC_ADB_PB1) && - (macintosh_config->adb_type != MAC_ADB_PB2)) { - switch(macintosh_config->ident) - { - case MAC_MODEL_II: - case MAC_MODEL_IIX: - case MAC_MODEL_IICX: - case MAC_MODEL_SE30: - via2[vBufA] |= 0x3F; - via2[vDirA] = ~nubus_active | 0xc0; - break; - default: - via2[vBufA] = 0xFF; - via2[vDirA] = ~nubus_active; - } + (macintosh_config->adb_type != MAC_ADB_PB2)) { + via2[vBufA] |= 0x7F; + via2[vDirA] |= 0x7F; } + break; } } @@ -489,7 +505,8 @@ irqreturn_t via2_irq(int irq, void *dev_id) via2[gIER] = irq_bit; via2[gIFR] = irq_bit | rbv_clear; m68k_handle_int(irq_num); - via2[gIER] = irq_bit | 0x80; + if (irq_num != IRQ_MAC_NUBUS || nubus_disabled == 0) + via2[gIER] = irq_bit | 0x80; } ++irq_num; irq_bit <<= 1; @@ -511,7 +528,7 @@ irqreturn_t via_nubus_irq(int irq, void *dev_id) if (rbv_present) events &= via2[rSIER]; else - events &= nubus_active; + events &= ~via2[vDirA]; if (!events) return IRQ_NONE; @@ -533,7 +550,7 @@ irqreturn_t via_nubus_irq(int irq, void *dev_id) if (rbv_present) events &= via2[rSIER]; else - events &= nubus_active; + events &= ~via2[vDirA]; } while (events); return IRQ_HANDLED; } @@ -541,38 +558,38 @@ irqreturn_t via_nubus_irq(int irq, void *dev_id) void via_irq_enable(int irq) { int irq_src = IRQ_SRC(irq); int irq_idx = IRQ_IDX(irq); - int irq_bit = 1 << irq_idx; #ifdef DEBUG_IRQUSE printk(KERN_DEBUG "via_irq_enable(%d)\n", irq); #endif if (irq_src == 1) { - via1[vIER] = irq_bit | 0x80; + via1[vIER] = IER_SET_BIT(irq_idx); } else if (irq_src == 2) { - via2[gIER] = irq_bit | 0x80; + if (irq != IRQ_MAC_NUBUS || nubus_disabled == 0) + via2[gIER] = IER_SET_BIT(irq_idx); } else if (irq_src == 7) { - nubus_active |= irq_bit; - if (rbv_present) { - /* enable the slot interrupt. SIER works like IER. */ + switch (macintosh_config->via_type) { + case MAC_VIA_II: + nubus_disabled &= ~(1 << irq_idx); + /* Enable the CA1 interrupt when no slot is disabled. */ + if (!nubus_disabled) + via2[gIER] = IER_SET_BIT(1); + break; + case MAC_VIA_IIci: + /* On RBV, enable the slot interrupt. + * SIER works like IER. + */ via2[rSIER] = IER_SET_BIT(irq_idx); - } else { - /* Make sure the bit is an input, to enable the irq */ - /* But not on PowerBooks, that's ADB... */ + break; + case MAC_VIA_QUADRA: + /* Make the port A line an input to enable the slot irq. + * But not on PowerBooks, that's ADB. + */ if ((macintosh_config->adb_type != MAC_ADB_PB1) && - (macintosh_config->adb_type != MAC_ADB_PB2)) { - switch(macintosh_config->ident) - { - case MAC_MODEL_II: - case MAC_MODEL_IIX: - case MAC_MODEL_IICX: - case MAC_MODEL_SE30: - via2[vDirA] &= (~irq_bit | 0xc0); - break; - default: - via2[vDirA] &= ~irq_bit; - } - } + (macintosh_config->adb_type != MAC_ADB_PB2)) + via2[vDirA] &= ~(1 << irq_idx); + break; } } } @@ -580,29 +597,31 @@ void via_irq_enable(int irq) { void via_irq_disable(int irq) { int irq_src = IRQ_SRC(irq); int irq_idx = IRQ_IDX(irq); - int irq_bit = 1 << irq_idx; #ifdef DEBUG_IRQUSE printk(KERN_DEBUG "via_irq_disable(%d)\n", irq); #endif if (irq_src == 1) { - via1[vIER] = irq_bit & 0x7F; + via1[vIER] = IER_CLR_BIT(irq_idx); } else if (irq_src == 2) { - via2[gIER] = irq_bit & 0x7F; + via2[gIER] = IER_CLR_BIT(irq_idx); } else if (irq_src == 7) { - if (rbv_present) { - /* disable the slot interrupt. SIER works like IER. */ + switch (macintosh_config->via_type) { + case MAC_VIA_II: + nubus_disabled |= 1 << irq_idx; + if (nubus_disabled) + via2[gIER] = IER_CLR_BIT(1); + break; + case MAC_VIA_IIci: via2[rSIER] = IER_CLR_BIT(irq_idx); - } else { - /* disable the nubus irq by changing dir to output */ - /* except on PMU */ + break; + case MAC_VIA_QUADRA: if ((macintosh_config->adb_type != MAC_ADB_PB1) && - (macintosh_config->adb_type != MAC_ADB_PB2)) { - via2[vDirA] |= irq_bit; - } + (macintosh_config->adb_type != MAC_ADB_PB2)) + via2[vDirA] |= 1 << irq_idx; + break; } - nubus_active &= ~irq_bit; } } @@ -638,7 +657,7 @@ int via_irq_pending(int irq) } else if (irq_src == 2) { return via2[gIFR] & irq_bit; } else if (irq_src == 7) { - /* FIXME: this can't work while a slot irq is disabled! */ + /* Always 0 for MAC_VIA_QUADRA if the slot irq is disabled. */ return ~via2[gBufA] & irq_bit; } return 0; |