diff options
Diffstat (limited to 'arch/mips/gt64120/momenco_ocelot/setup.c')
| -rw-r--r-- | arch/mips/gt64120/momenco_ocelot/setup.c | 369 |
1 files changed, 369 insertions, 0 deletions
diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c new file mode 100644 index 000000000000..d610f8c17c81 --- /dev/null +++ b/arch/mips/gt64120/momenco_ocelot/setup.c @@ -0,0 +1,369 @@ +/* + * setup.c + * + * BRIEF MODULE DESCRIPTION + * Momentum Computer Ocelot (CP7000) - board dependent boot routines + * + * Copyright (C) 1996, 1997, 2001 Ralf Baechle + * Copyright (C) 2000 RidgeRun, Inc. + * Copyright (C) 2001 Red Hat, Inc. + * Copyright (C) 2002 Momentum Computer + * + * Author: RidgeRun, Inc. + * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com + * + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/swap.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/timex.h> +#include <linux/vmalloc.h> +#include <asm/time.h> +#include <asm/bootinfo.h> +#include <asm/page.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/pci.h> +#include <asm/processor.h> +#include <asm/ptrace.h> +#include <asm/reboot.h> +#include <asm/traps.h> +#include <linux/bootmem.h> +#include <linux/initrd.h> +#include <asm/gt64120.h> +#include "ocelot_pld.h" + +unsigned long gt64120_base = KSEG1ADDR(GT_DEF_BASE); + +/* These functions are used for rebooting or halting the machine*/ +extern void momenco_ocelot_restart(char *command); +extern void momenco_ocelot_halt(void); +extern void momenco_ocelot_power_off(void); + +extern void gt64120_time_init(void); +extern void momenco_ocelot_irq_setup(void); + +static char reset_reason; + +#define ENTRYLO(x) ((pte_val(pfn_pte((x) >> PAGE_SHIFT, PAGE_KERNEL_UNCACHED)) >> 6)|1) + +static void __init setup_l3cache(unsigned long size); + +/* setup code for a handoff from a version 1 PMON 2000 PROM */ +void PMON_v1_setup() +{ + /* A wired TLB entry for the GT64120A and the serial port. The + GT64120A is going to be hit on every IRQ anyway - there's + absolutely no point in letting it be a random TLB entry, as + it'll just cause needless churning of the TLB. And we use + the other half for the serial port, which is just a PITA + otherwise :) + + Device Physical Virtual + GT64120 Internal Regs 0x24000000 0xe0000000 + UARTs (CS2) 0x2d000000 0xe0001000 + */ + add_wired_entry(ENTRYLO(0x24000000), ENTRYLO(0x2D000000), 0xe0000000, PM_4K); + + /* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM + in the CS[012] region. We can't use ioremap() yet. The NVRAM + is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions. + + Ocelot PLD (CS0) 0x2c000000 0xe0020000 + NVRAM 0x2c800000 0xe0030000 + */ + + add_temporary_entry(ENTRYLO(0x2C000000), ENTRYLO(0x2d000000), 0xe0020000, PM_64K); + + /* Relocate the CS3/BootCS region */ + GT_WRITE(GT_CS3BOOTLD_OFS, 0x2f000000 >> 21); + + /* Relocate CS[012] */ + GT_WRITE(GT_CS20LD_OFS, 0x2c000000 >> 21); + + /* Relocate the GT64120A itself... */ + GT_WRITE(GT_ISD_OFS, 0x24000000 >> 21); + mb(); + gt64120_base = 0xe0000000; + + /* ...and the PCI0 view of it. */ + GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000020); + GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x24000000); + GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000024); + GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x24000001); +} + +/* setup code for a handoff from a version 2 PMON 2000 PROM */ +void PMON_v2_setup() +{ + /* A wired TLB entry for the GT64120A and the serial port. The + GT64120A is going to be hit on every IRQ anyway - there's + absolutely no point in letting it be a random TLB entry, as + it'll just cause needless churning of the TLB. And we use + the other half for the serial port, which is just a PITA + otherwise :) + + Device Physical Virtual + GT64120 Internal Regs 0xf4000000 0xe0000000 + UARTs (CS2) 0xfd000000 0xe0001000 + */ + add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xfD000000), 0xe0000000, PM_4K); + + /* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM + in the CS[012] region. We can't use ioremap() yet. The NVRAM + is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions. + + Ocelot PLD (CS0) 0xfc000000 0xe0020000 + NVRAM 0xfc800000 0xe0030000 + */ + add_temporary_entry(ENTRYLO(0xfC000000), ENTRYLO(0xfd000000), 0xe0020000, PM_64K); + + gt64120_base = 0xe0000000; +} + +static void __init momenco_ocelot_setup(void) +{ + void (*l3func)(unsigned long)=KSEG1ADDR(&setup_l3cache); + unsigned int tmpword; + + board_time_init = gt64120_time_init; + + _machine_restart = momenco_ocelot_restart; + _machine_halt = momenco_ocelot_halt; + _machine_power_off = momenco_ocelot_power_off; + + /* + * initrd_start = (ulong)ocelot_initrd_start; + * initrd_end = (ulong)ocelot_initrd_start + (ulong)ocelot_initrd_size; + * initrd_below_start_ok = 1; + */ + + /* do handoff reconfiguration */ + if (gt64120_base == KSEG1ADDR(GT_DEF_BASE)) + PMON_v1_setup(); + else + PMON_v2_setup(); + + /* Turn off the Bit-Error LED */ + OCELOT_PLD_WRITE(0x80, INTCLR); + + /* Relocate all the PCI1 stuff, not that we use it */ + GT_WRITE(GT_PCI1IOLD_OFS, 0x30000000 >> 21); + GT_WRITE(GT_PCI1M0LD_OFS, 0x32000000 >> 21); + GT_WRITE(GT_PCI1M1LD_OFS, 0x34000000 >> 21); + + /* Relocate PCI0 I/O and Mem0 */ + GT_WRITE(GT_PCI0IOLD_OFS, 0x20000000 >> 21); + GT_WRITE(GT_PCI0M0LD_OFS, 0x22000000 >> 21); + + /* Relocate PCI0 Mem1 */ + GT_WRITE(GT_PCI0M1LD_OFS, 0x36000000 >> 21); + + /* For the initial programming, we assume 512MB configuration */ + /* Relocate the CPU's view of the RAM... */ + GT_WRITE(GT_SCS10LD_OFS, 0); + GT_WRITE(GT_SCS10HD_OFS, 0x0fe00000 >> 21); + GT_WRITE(GT_SCS32LD_OFS, 0x10000000 >> 21); + GT_WRITE(GT_SCS32HD_OFS, 0x0fe00000 >> 21); + + GT_WRITE(GT_SCS1LD_OFS, 0xff); + GT_WRITE(GT_SCS1HD_OFS, 0x00); + GT_WRITE(GT_SCS0LD_OFS, 0); + GT_WRITE(GT_SCS0HD_OFS, 0xff); + GT_WRITE(GT_SCS3LD_OFS, 0xff); + GT_WRITE(GT_SCS3HD_OFS, 0x00); + GT_WRITE(GT_SCS2LD_OFS, 0); + GT_WRITE(GT_SCS2HD_OFS, 0xff); + + /* ...and the PCI0 view of it. */ + GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000010); + GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x00000000); + GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014); + GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x10000000); + GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x0ffff000); + GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x0ffff000); + + tmpword = OCELOT_PLD_READ(BOARDREV); + if (tmpword < 26) + printk("Momenco Ocelot: Board Assembly Rev. %c\n", 'A'+tmpword); + else + printk("Momenco Ocelot: Board Assembly Revision #0x%x\n", tmpword); + + tmpword = OCELOT_PLD_READ(PLD1_ID); + printk("PLD 1 ID: %d.%d\n", tmpword>>4, tmpword&15); + tmpword = OCELOT_PLD_READ(PLD2_ID); + printk("PLD 2 ID: %d.%d\n", tmpword>>4, tmpword&15); + tmpword = OCELOT_PLD_READ(RESET_STATUS); + printk("Reset reason: 0x%x\n", tmpword); + reset_reason = tmpword; + OCELOT_PLD_WRITE(0xff, RESET_STATUS); + + tmpword = OCELOT_PLD_READ(BOARD_STATUS); + printk("Board Status register: 0x%02x\n", tmpword); + printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent"); + printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent"); + printk(" - Tulip PHY %s connected\n", (tmpword&0x10)?"is":"not"); + printk(" - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1); + printk(" - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3))); + + if (tmpword&12) + l3func((1<<(((tmpword&12) >> 2)+20))); + + switch(tmpword &3) { + case 3: + /* 512MiB */ + /* Decoders are allready set -- just add the + * appropriate region */ + add_memory_region( 0x40<<20, 0xC0<<20, BOOT_MEM_RAM); + add_memory_region(0x100<<20, 0x100<<20, BOOT_MEM_RAM); + break; + case 2: + /* 256MiB -- two banks of 128MiB */ + GT_WRITE(GT_SCS10HD_OFS, 0x07e00000 >> 21); + GT_WRITE(GT_SCS32LD_OFS, 0x08000000 >> 21); + GT_WRITE(GT_SCS32HD_OFS, 0x0fe00000 >> 21); + + GT_WRITE(GT_SCS0HD_OFS, 0x7f); + GT_WRITE(GT_SCS2LD_OFS, 0x80); + GT_WRITE(GT_SCS2HD_OFS, 0xff); + + /* reconfigure the PCI0 interface view of memory */ + GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014); + GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x08000000); + GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x0ffff000); + GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x0ffff000); + + add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM); + add_memory_region(0x80<<20, 0x80<<20, BOOT_MEM_RAM); + break; + case 1: + /* 128MiB -- 64MiB per bank */ + GT_WRITE(GT_SCS10HD_OFS, 0x03e00000 >> 21); + GT_WRITE(GT_SCS32LD_OFS, 0x04000000 >> 21); + GT_WRITE(GT_SCS32HD_OFS, 0x07e00000 >> 21); + + GT_WRITE(GT_SCS0HD_OFS, 0x3f); + GT_WRITE(GT_SCS2LD_OFS, 0x40); + GT_WRITE(GT_SCS2HD_OFS, 0x7f); + + /* reconfigure the PCI0 interface view of memory */ + GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014); + GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x04000000); + GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x03fff000); + GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x03fff000); + + /* add the appropriate region */ + add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM); + break; + case 0: + /* 64MiB */ + GT_WRITE(GT_SCS10HD_OFS, 0x01e00000 >> 21); + GT_WRITE(GT_SCS32LD_OFS, 0x02000000 >> 21); + GT_WRITE(GT_SCS32HD_OFS, 0x03e00000 >> 21); + + GT_WRITE(GT_SCS0HD_OFS, 0x1f); + GT_WRITE(GT_SCS2LD_OFS, 0x20); + GT_WRITE(GT_SCS2HD_OFS, 0x3f); + + /* reconfigure the PCI0 interface view of memory */ + GT_WRITE(GT_PCI0_CFGADDR_OFS, 0x80000014); + GT_WRITE(GT_PCI0_CFGDATA_OFS, 0x04000000); + GT_WRITE(GT_PCI0_BS_SCS10_OFS, 0x01fff000); + GT_WRITE(GT_PCI0_BS_SCS32_OFS, 0x01fff000); + + break; + } + + /* Fix up the DiskOnChip mapping */ + GT_WRITE(GT_DEV_B3_OFS, 0xfef73); +} + +early_initcall(momenco_ocelot_setup); + +extern int rm7k_tcache_enabled; +/* + * This runs in KSEG1. See the verbiage in rm7k.c::probe_scache() + */ +#define Page_Invalidate_T 0x16 +static void __init setup_l3cache(unsigned long size) +{ + int register i; + unsigned long tmp; + + printk("Enabling L3 cache..."); + + /* Enable the L3 cache in the GT64120A's CPU Configuration register */ + tmp = GT_READ(GT_CPU_OFS); + GT_WRITE(GT_CPU_OFS, tmp | (1<<14)); + + /* Enable the L3 cache in the CPU */ + set_c0_config(1<<12 /* CONF_TE */); + + /* Clear the cache */ + write_c0_taglo(0); + write_c0_taghi(0); + + for (i=0; i < size; i+= 4096) { + __asm__ __volatile__ ( + ".set noreorder\n\t" + ".set mips3\n\t" + "cache %1, (%0)\n\t" + ".set mips0\n\t" + ".set reorder" + : + : "r" (KSEG0ADDR(i)), + "i" (Page_Invalidate_T)); + } + + /* Let the RM7000 MM code know that the tertiary cache is enabled */ + rm7k_tcache_enabled = 1; + + printk("Done\n"); +} + + +/* This needs to be one of the first initcalls, because no I/O port access + can work before this */ + +static int io_base_ioremap(void) +{ + void *io_remap_range = ioremap(GT_PCI_IO_BASE, GT_PCI_IO_SIZE); + + if (!io_remap_range) { + panic("Could not ioremap I/O port range"); + } + set_io_port_base(io_remap_range - GT_PCI_IO_BASE); + + return 0; +} + +module_init(io_base_ioremap); |